| Electronic Components Datasheet Search |
|
WP6 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | WP-635889-1.5-4 | TE Connectivity | High Power Resistor - Surface Mount. RoHS : Compliant |
| 13,500 | |
| WP-6-12 | Amphenol Audio | RoHS : Compliant |
| 21 | ||
| WP60H | Weller Hand Tools GmbH | Pencil Soldering Iron - 60 W - Hatched RoHS : Compliant |
| 4 | ||
| WP66DK-S030VA1-R15000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP-610419-2.5-9 | TE Connectivity | WP-610419-2.5-9 RoHS : Compliant |
| 0 | ||
| WP66DK-P030VA1-R15000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP-699318-2.5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Clear 69.9x31.8mm RoHS : Compliant |
| 0 | ||
| WP6C-S024VA1-R6000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP6C-S030VA1-R6000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP6C-P024VA1-R6000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP66DK-S008VA1-R15000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP67-BHA-DC | L-com Inc | IP67 BULKHEAD ADAPTER KIT FOR TDG1026KS-C6A-DC RoHS : Compliant |
| 0 | ||
| WP66DK-P008VA1-R15000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP6C-P030VA1-R6000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
| WP66DK-S006VA1-R15000 | JAE Electronics | RoHS : Compliant |
| 0 | ||
![]() Verical | WP-699254-5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Gloss White 69.9x25.4mm RoHS : Compliant |
| 20,000 | |
| WP-699191-5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester White 69.9x19.1mm RoHS : Compliant |
| 10,000 | ||
| WP-610419-2.5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester White 61x41.9mm RoHS : Compliant |
| 10,000 | ||
| WP63YD | Kingbright | LED Uni-Color Yellow 590nm 2-Pin T-1 3/4 Bulk RoHS : Compliant |
| 950 | ||
![]() Avnet Americas | LE B Q7WP-6C8C-24 | ams OSRAM Group | OSTAR PROJECTION - Tape and Reel (Alt: Q65113A3685) RoHS : Compliant | 0 | ||
| SWH24-19-EW-P6R | Bel Fuse | ac-dc, 19 Vdc, 1.25 A, SW, wall-plug, EU, P6 rt center pos, level VI, white - Boxed Product (Development Kits) (Alt: SWH24-19-EW-P6R) RoHS : Not Compliant |
| 0 | ||
| SWH24-28-EW-P6R | Bel Fuse | ac-dc, 28 Vdc, 0.85 A, SW, wall-plug, EU, P6 rt center pos, level VI, white - Boxed Product (Development Kits) (Alt: SWH24-28-EW-P6R) RoHS : Not Compliant |
| 0 | ||
| UWP60-60RJ8 | Bourns Inc | Resistor, 60 ohm, Riedon UWP Series, 60 W, ? 5%, Quick Connect - Boxed Product (Development Kits) (Alt: UWP60-60RJ8) RoHS : Not Compliant |
| 0 | ||
| SMM12-12-4W-P6R | Bel Fuse | ac-dc, 12 Vdc, 1 A, SW, multi-blade, N/E/B/A, P6 rt center pos, level VI, MED, white - Boxed Product (Development Kits) (Alt: SMM12-12-4W-P6R) RoHS : Not Compliant |
| 0 | ||
| SMM12-18-KW-P6R | Bel Fuse | ac-dc, 18 Vdc, .66 A, SW, multi-blade, no blades, P6 rt center pos, level VI, MED, white - Boxed Product (Development Kits) (Alt: SMM12-18-KW-P6R) RoHS : Not Compliant |
| 0 | ||
| SMM12-6-4W-P6 | Bel Fuse | ac-dc, 6 Vdc, 2 A, SW, multi-blade, N/E/B/A, P6 center pos, level VI, MED, white - Boxed Product (Development Kits) (Alt: SMM12-6-4W-P6) RoHS : Not Compliant |
| 0 | ||
| NRWP682M35V18X35.5F | NIC Components Corp | Electrolytic Capacitor, 6800 uF, 35 V, ? 20%, Radial Leaded, 2000 hours @ 105?C, Polar, 7.5 mm - Bulk (Alt: NRWP682M35V18X35.5F) RoHS : Compliant |
| 0 | ||
| SDM50-18-UW-P6R | Bel Fuse | ac-dc, 18 Vdc, 3.15 A, SW, C14 desk-top, P6 rt center pos plug, no cord, level VI, MED, white - Boxed Product (Development Kits) (Alt: SDM50-18-UW-P6R) RoHS : Not Compliant |
| 0 | ||
| SWH24-36-EW-P6 | Bel Fuse | ac-dc, 36 Vdc, 0.65 A, SW, wall-plug, EU, P6 center pos, level VI, white - Boxed Product (Development Kits) (Alt: SWH24-36-EW-P6) RoHS : Not Compliant |
| 0 | ||
| SWH24-36-EW-P6R | Bel Fuse | ac-dc, 36 Vdc, 0.65 A, SW, wall-plug, EU, P6 rt center pos, level VI, white - Boxed Product (Development Kits) (Alt: SWH24-36-EW-P6R) RoHS : Not Compliant |
| 0 | ||
| SMM12-5-KW-P6R | Bel Fuse | ac-dc, 5 Vdc, 2.4 A, SW, multi-blade, no blades, P6 rt center pos, level VI, MED, white - Boxed Product (Development Kits) (Alt: SMM12-5-KW-P6R) RoHS : Not Compliant |
| 0 | ||
| SMM12-6-KW-P6 | Bel Fuse | ac-dc, 6 Vdc, 2 A, SW, multi-blade, no blades, P6 center pos, level VI, MED, white - Boxed Product (Development Kits) (Alt: SMM12-6-KW-P6) RoHS : Not Compliant |
| 0 | ||
| MF11BMT-WP6CA02 | Hirose Electric Co Ltd | Water-Proof Optical Connectors with MT Ferrul - Bulk (Alt: MF11BMT-WP6CA02) RoHS : Compliant |
| 0 | ||
| SDM50-5-UW-P6R | Bel Fuse | ac-dc, 5 Vdc, 9 A, SW, C14 desk-top, P6 rt center pos plug, no cord, level VI, MED, white - Boxed Product (Development Kits) (Alt: SDM50-5-UW-P6R) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | WP63GT | Kingbright | Single Color LEDs Green 568nm Transparent 40mcd RoHS : Compliant |
| 19,588 | |
| WP63YD | Kingbright | Single Color LEDs YELLOW DIFFUSED RoHS : Compliant |
| 16,251 | ||
| WP66DK-P008VA1-R15000 | JAE Electronics | Board to Board & Mezzanine Connectors 8CKT PLUG 0.35MM 0.6MM VRT STACKING RoHS : Compliant |
| 15,947 | ||
| WP66DK-S030VA1-R15000 | JAE Electronics | Board to Board & Mezzanine Connectors 30CKT RCPT 0.35MM 0.6MM VRT STACKING RoHS : Compliant |
| 11,810 | ||
| WP66DK-S008VA1-R15000 | JAE Electronics | Board to Board & Mezzanine Connectors 8CKT RCPT 0.35MM 0.6MM VRT STACKING RoHS : Compliant |
| 6,704 | ||
| WP-699191-5-9 | TE Connectivity | Labels & Industrial Warning Signs WP 2.75/.75" LABEL PRICE PER LABEL RoHS : Compliant |
| 5,000 | ||
| WP63IT | Kingbright | Single Color LEDs Red 625nm Transparent 50mcd RoHS : Compliant |
| 2,972 | ||
| WP63GD | Kingbright | Single Color LEDs GREEN DIFFUSED RoHS : Compliant |
| 2,224 | ||
| WP63SURDK | Kingbright | Single Color LEDs 5MM LED SUPER RED DIFFUSED RoHS : Compliant |
| 469 | ||
| WP66DK-S006VA1-R15000 | JAE Electronics | Board to Board & Mezzanine Connectors 6CKT RCPT 0.35MM 0.6MM VRT STACKING RoHS : Compliant |
| 123 | ||
| WP67-RJ45-DC | L-com Inc | Modular Connectors / Ethernet Connectors IP67 RJ45 PLUG KIT COMPATIBLE W/ WP67-BHA-DC RoHS : Compliant |
| 10 | ||
| WP67-BHA-DC | L-com Inc | Modular Connectors / Ethernet Connectors IP67 BULKHEAD ADAPTER KIT FOR TDG1026KS-C6A-DC RoHS : Compliant |
| 4 | ||
| WP67-BHA-CAP | L-com Inc | Modular Connectors / Ethernet Connectors IP67 Dust Cap for WP67-BHA-DC |
| 2 | ||
| WP66DK-P006VA1-R15000 | JAE Electronics | Board to Board & Mezzanine Connectors 6CKT PLUG 0.35MM 0.6MM VRT STACKING RoHS : Compliant |
| 0 | ||
| WP63ID | Kingbright | Single Color LEDs HI EFF RED DIFFUSED RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | WP-610419-2.5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester White 61x41.9mm RoHS : Compliant | 10,000 | ||
| WP63YD | Kingbright | LED Uni-Color Yellow 590nm 2-Pin T-1 3/4 Bulk RoHS : Compliant |
| 950 | ||
![]() Newark | UB-MC5BR3-SDWP604-4S-TF | JST Manufacturing | Micro Usb Conn, Type B, Receptacle, Smt; |Jst/japan Solderless Terminals UB-MC5BR3-SDWP604-4S-TF RoHS : Compliant |
| 1,861 | |
| WP67-RJ45-DC | L-com Inc | Connector Accessory, Plug Kit; |L-Com WP67-RJ45-DC RoHS : Compliant |
| 1,162 | ||
| FWP-63A22F | Eaton Bussmann | Fuse, 63A, Semiconductor, Hi Speed; |Eaton Bussmann FWP-63A22F RoHS : Compliant |
| 923 | ||
| WP67-BHA-CAP | L-com Inc | Dust Cap, Thermoplastic, Red, Ip67; Acce |L-Com WP67-BHA-CAP RoHS : Compliant |
| 819 | ||
| AWP-6P | Amphenol Sine Systems | Wedgelock, 6Pos, Thermoplastic, Orange; |Amphenol Sine/tuchel AWP-6P RoHS : Compliant |
| 137 | ||
| LE R S2WP-6P7Q-25-0 | ams OSRAM Group | Led, Red, 625Nm, 1000Lm, 120Deg; |Ams Osram Group LE R S2WP-6P7Q-25-0 RoHS : Compliant |
| 68 | ||
| LE R S2WP-6P7Q-25-0 | ams OSRAM Group | Led, Red, 625Nm, 1000Lm, 120Deg; |Ams Osram Group LE R S2WP-6P7Q-25-0 RoHS : Compliant |
| 68 | ||
| WP67001716 | Frigidaire | Shelf Support Hook Refrig; |Frigidaire WP67001716 RoHS : Not Compliant |
| 17 | ||
| KWP6PY | Panduit Corp | Keystone Phone Plate, Cat 6 Tx Plus; Available Until Stocks Are Exhausted |Panduit KWP6PY RoHS : Compliant |
| 10 | ||
| WP67001722 | Whirlpool | Support- R |Whirlpool WP67001722 RoHS : Not Compliant |
| 2 | ||
| WP6-8-3C | Takachi Electronics Enclosure Co Ltd | Enclosure, Multipurpose, Abs, Grey; |Takachi WP6-8-3C RoHS : Compliant |
| 1 | ||
| WP67003405 | Maytag | French Door Refrigerator Door; Available Until Stocks Are Exhausted |Maytag WP67003405 RoHS : Not Compliant |
| 1 | ||
| WP67006315 | Whirlpool | Frame, Chiller .rear. |Whirlpool WP67006315 RoHS : Not Compliant |
| 1 | ||
| WP67001721 | Whirlpool | Support- L |Whirlpool WP67001721 RoHS : Not Compliant |
| 1 | ||
| WP67-BHA-DC | L-com Inc | Conn Accessory, Bulkhead Adapter Kit; |L-Com WP67-BHA-DC RoHS : Compliant |
| 1 | ||
![]() RS | FWP-6.3A14F | Eaton Bussmann | FUSE CARTRIDGE FAST BLOW HOLDER MOUNT 700VAC/DC 16.3A |
| 10 | |
| FWP-6G10F | Eaton Bussmann | FUSE 6A 690VAC GR 10X38 |
| 8 | ||
| FWP-600A | Eaton Bussmann | FUSE CARTRIDGE BLADE FAST BLOW STUD MOUNT 700VAC/DC 600A |
| 7 | ||
| SVE06WP63 | Dwyer Instruments Inc | SOLENOID VALVE ENCLOSURE, 6 SOLENOIDS, WEATHERPROOF ENCLOSURE, 24 VDC |
| 4 | ||
| FWP-63A22F | Eaton Bussmann | FUSE, HIGH SPEED, CYLINDER, 63A, 700 VAC, 22X58 MM, CARTRIDGE, CLIP MOUNT, CE/UL RoHS : Compliant |
| 2 | ||
| OWP6D125 (1SCA022865R5100) | ABB Low Voltage Products and Systems | 6MM 6 POLE MECHANISM OT30-100F3 |
| 2 | ||
| FWP-60D | Eaton Bussmann | 60AMP 700V SEMI-COND FUSE |
| 1 | ||
| WP6611RJ | Siemens | PAKMTR 600A 6G 1PH 125A 5J RLS |
| 1 | ||
| WP67-BHA-DC | L-com Inc | IP67 WATERPROOF BULKHEAD, COMPATIBLE W/ TDG1026KS-C6A-DC |
| 1 | ||
| WP62 | Siemens | WP 3R/12 ENCL ASSY-62HX5.75D, 20 WIDE |
| 0 | ||
| WP6611 | Siemens | PAKMTR 600A 6G 1PH 125A 4J RNG |
| 0 | ||
| FWP-60 | Eaton Bussmann | FUSE CARTRIDGE BLADE FAST BLOW STUD MOUNT 700VAC/DC 60A |
| 0 | ||
| AWP6GBR1 | Pass & Seymour | BRONZE 6 GANG WALL PLATE |
| 0 | ||
| HW-P606SPK | Hubbell Wiegmann | SWING PANEL KIT FOR POLYCARB 6X6 |
| 0 | ||
| XTAE015B10WP60 | Eaton Cutler-Hammer | STR 3P FVNR 15A FR B 1NO 0.4-0.6A 42/50 |
| 0 | ||
![]() Rochester Electronics | LE CG Q8WP-6P5Q-2-0-A40-R18-ZI | ams OSRAM Group | LE CG Q8WP - High-Power LED Green (565-575 nm) RoHS : Compliant |
| 211 | |
![]() Sager | FWP-60 | Eaton Bussmann | Specialty Fuses 60A SEMI CONDUCTOR FUSE |
| 0 | |
| FWP-60D | Eaton Bussmann | Eaton Corporation 60AMP 700V SEMI-COND FUSE |
| 0 | ||
| SWH15-5-NW-P6R | Bel Fuse | Wall Mount AC Adapters ac-dc, 5 Vdc, 2 A, SW, wall-plug, NA, P6 rt center pos, level VI, white RoHS : Compliant |
| 0 | ||
| SWH15-5B-NW-P6R | Bel Fuse | Wall Mount AC Adapters ac-dc, 5 Vdc, 3 A, SW, wall-plug, NA, P6 rt center pos, level VI, white RoHS : Compliant |
| 0 | ||
| SWH24-12-NW-P6 | Bel Fuse | Wall Mount AC Adapters ac-dc, 12 Vdc, 2 A, SW, wall-plug, NA, P6 center pos, level VI, white RoHS : Compliant |
| 0 | ||
| SWH24-19-EW-P6R | Bel Fuse | Wall Mount AC Adapters ac-dc, 19 Vdc, 1.25 A, SW, wall-plug, EU, P6 rt center pos, level VI, white RoHS : Compliant |
| 0 | ||
| SWH24-28-EW-P6R | Bel Fuse | Wall Mount AC Adapters ac-dc, 28 Vdc, 0.85 A, SW, wall-plug, EU, P6 rt center pos, level VI, white RoHS : Compliant |
| 0 | ||
| SWH24-36-NW-P6 | Bel Fuse | Wall Mount AC Adapters ac-dc, 36 Vdc, 0.65 A, SW, wall-plug, NA, P6 center pos, level VI, white RoHS : Compliant |
| 0 | ||
| SWI5-12-NW-P6R | Bel Fuse | Wall Mount AC Adapters ac-dc, 12 Vdc, 0.5 A, SW, wall-plug, NA, P5 center pos plug, level VI, white RoHS : Compliant |
| 0 | ||
| FWP-6.3A14F | Eaton Bussmann | Specialty Fuses 660V 6.3Arms Semiconductor |
| 0 | ||
| SDM24-12-UDW-P6 | Bel Fuse | Desktop AC Adapters ac-dc, 12 Vdc, 2 A, SW, C8 desk-top, P6 center pos plug, no cord, level VI, MED, white RoHS : Compliant |
| 0 | ||
| SWI36-24-NW-P6 | Bel Fuse | AC-DC, 24 VDC, 1.5 A, SW, WALL-PLUG, NA, P6 CENTER POS, LEVEL VI, WHITE / EXTERNAL ADAPTER RoHS : Compliant |
| 0 | ||
| SWI60-12-NW-P6 | Bel Fuse | AC-DC, 12 VDC, 5 A, SW, WALL-PLUG, NA, P6 CENTER POS, LEVEL VI, WHITE / COO: CHN RoHS : Compliant |
| 0 | ||
| SWI6D-5-BW-P6 | Bel Fuse | AC-DC, 5 VDC, 1 A, SW, WALL-PLUG, UK, P6 CENTER POS, LEVEL VI, WHITE |
| 0 | ||
| SWI6D-5.9-EW-P6R | Bel Fuse | AC-DC, 5.9 VDC, 1 A, SW, WALL-PLUG, EU, P6 RT CENTER POS, LEVEL VI, WHITE |
| 0 | ||
![]() TME | UB-MC5BR3-SDWP604-4S-TF | JST Manufacturing | Connector: USB B micro; socket; for panel mounting; SMT; PIN: 5 RoHS : Compliant |
| 53,021 | |
| SMI12-12-KW-P6 | Bel Power Solutions | Power supply: switching; Iout max: 1A; 12W; Usup: 90÷264VAC; 12V |
| 2,520 | ||
| F125WP683G250V | YAGEO Corporation | F125WP683G250V |
| 800 | ||
| SDM24-5-UDW-P6 | Bel Power Solutions | Power supply: switching; Iout max: 4A; Iout: 4A; 20W; desktop; 5V |
| 157 | ||
| PAWP6 | Carlo Gavazzi Holding AG | PAWP6 |
| 40 | ||
| WP6-8-2G | Takachi Electronics Enclosure Co Ltd | Enclosure: multipurpose; X: 60mm; Y: 80mm; Z: 20mm; WP; ASA; IP67 |
| 9 | ||
| WP6-8-3C | Takachi Electronics Enclosure Co Ltd | Enclosure: multipurpose; X: 60mm; Y: 80mm; Z: 30mm; WP; ABS; graphite |
| 7 | ||
| WP-6 | TERMIK-SP | Heating element: flow heater; 6kW; 400V |
| 2 | ||
| LD-INEXT30WP-64 | GTV Poland | Lamp: LED flood light; 30W; 230VAC; 6400K; CRImin: 80; 2400lm |
| 1 | ||
| LD-INEXT50WP-64 | GTV Poland | Lamp: LED flood light; 50W; 230VAC; 6400K; CRImin: 80; 4000lm |
| 1 | ||
| AWP-6P | Amphenol Corporation | Secondary lock |
| 0 | ||
| AWP-6S | Amphenol Corporation | Secondary lock RoHS : Compliant |
| 0 | ||
| AWP-6SB | Amphenol Corporation | Secondary lock RoHS : Compliant |
| 0 | ||
| AWP-6SA | Amphenol Corporation | Secondary lock RoHS : Compliant |
| 0 | ||
| SK6812MINIRGBW-NW-P6-A | Dongguan Opsco Optoelectronics Co Ltd | Programmable LED; RGBW; SMD; PLCC4; 3.7÷5.5VDC; 3.5x3.7x1.9mm |
| 0 | ||
![]() Interstate Connecting Components | AWP-6SA | Amphenol Sine Systems | 6P FEM WEDGELOK,KEY A |
| 0 | |
| WP-610419-2.5-9 | TE Connectivity | D67366-000 RoHS : Compliant |
| 0 | ||
| WP-699254-5-9 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| AWP-6P | Amphenol Sine Systems | 6P MALE WEDGELOK |
| 0 | ||
| WP-699191-5-9 | TE Connectivity | 2-1200605-6,D81438-000 RoHS : Compliant |
| 0 | ||
| AWP-6SB | Amphenol Sine Systems | 6P FEM WEDGELOK,KEY B |
| 0 | ||
| WP-699318-2.5-9 | TE Connectivity | D86363-000 LABEL 2.75Wx1.25H POLY |
| 0 | ||
| AWP-6PA | Amphenol Sine Systems |
| 0 | |||
| AWP-6S | Amphenol Sine Systems | 6P FEM WEDGELOK |
| 0 | ||
| WWP-65 | Amphenol Industrial Operations | HOUSING | 0 | |||
| AWP-6PB | Amphenol Sine Systems |
| 0 | |||
| WP-635889-1.5-4 | TE Connectivity | WP-635889-1.5-4 RoHS : Compliant | 0 | |||
| WWP-64 | Amphenol Industrial Operations | WEDGE | 0 | |||
![]() PEI Genesis | AWP-6SA | Amphenol Sine Systems |
| 0 | ||
| WP65 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| AWP-6P | Amphenol Sine Systems |
| 0 | |||
| AWP-6SB | Amphenol Sine Systems |
| 0 | |||
| AWP-6PA | Amphenol Sine Systems |
| 0 | |||
| AWP-6S | Amphenol Sine Systems |
| 0 | |||
| AWP-6PB | Amphenol Sine Systems |
| 0 | |||
![]() Powell Electronics | AWP-6S | Amphenol Sine Systems | 6 Position Female Wedgelock |
| 10,605 | |
| AWP-6P | Amphenol Sine Systems | 6 Position Male Wedgelock |
| 5,280 | ||
| AWP-6SA | Amphenol Sine Systems | 6 Position Female Wedgelock A Key |
| 792 | ||
![]() Richardson RFPD | AAT3696IWP-6-T1 | Skyworks Solutions Inc | POWER MANAGEMENT IC RoHS : Compliant | 0 | ||
![]() Avnet Abacus | AWP-6SA | Amphenol Corporation | Connector Accessory Wedgelock Amphenol ATP Series ATP066S Automotive Connectors ATP (Alt: AWP-6SA) RoHS : Compliant | 0 | ||
| SWI6D-5-BW-P6 | Bel Fuse | acdc 5 Vdc 1 A SW wallplug UK P6 center pos level VI white (Alt: SWI6D-5-BW-P6) RoHS : Compliant | 0 | |||
| SWI6D-9-EW-P6 | Bel Fuse | acdc 9 Vdc 066 A SW wallplug EU P6 center pos level VI white (Alt: SWI6D-9-EW-P6) RoHS : Compliant | 0 | |||
| SWI60-12-NW-P6 | Bel Fuse | acdc 12 VDC 5 A SW wallplug NA P6 center pos level VI White (Alt: SWI60-12-NW-P6) RoHS : Compliant | 0 | |||
| SWI6D-5B-BW-P6 | Bel Fuse | acdc 5 Vdc 12 A SW wallplug UK P6 center pos level VI white (Alt: SWI6D-5B-BW-P6) RoHS : Compliant | 0 | |||
| SWI6D-12-BW-P6 | Bel Fuse | acdc 12 Vdc 050 A SW wallplug UK P6 center pos level VI white (Alt: SWI6D-12-BW-P6) RoHS : Compliant | 0 | |||
| SWI60-19-EW-P6 | Bel Fuse | acdc 19 VDC 315 A SW wallplug EUR P6 center pos level VI White (Alt: SWI60-19-EW-P6) RoHS : Compliant | 0 | |||
| SWI6D-12-NW-P6 | Bel Fuse | acdc 12 Vdc 050 A SW wallplug NA P6 center pos level VI white (Alt: SWI6D-12-NW-P6) RoHS : Compliant | 0 | |||
| SWI6D-5.9-EW-P6 | Bel Fuse | acdc 59 Vdc 1 A SW wallplug EU P6 center pos level VI white (Alt: SWI6D-5.9-EW-P6) RoHS : Compliant | 0 | |||
| SWI60-24-NW-P6R | Bel Fuse | acdc 24 VDC 250 A SW wallplug NA P6 rt center pos level VI White (Alt: SWI60-24-NW-P6R) RoHS : Compliant | 0 | |||
| SWI6D-12-NW-P6R | Bel Fuse | acdc 12 Vdc 050 A SW wallplug NA P6 rt center pos level VI white (Alt: SWI6D-12-NW-P6R) RoHS : Compliant | 0 | |||
| SWI6D-5.9-EW-P6R | Bel Fuse | acdc 59 Vdc 1 A SW wallplug EU P6 rt center pos level VI white (Alt: SWI6D-5.9-EW-P6R) RoHS : Compliant | 0 | |||
| SWI6D-7.5-NW-P6R | Bel Fuse | acdc 75 Vdc 080 A SW wallplug NA P6 rt center pos level VI white (Alt: SWI6D-7.5-NW-P6R) RoHS : Compliant | 0 | |||
| SWI6D-7.5-BW-P6R | Bel Fuse | acdc 75 Vdc 080 A SW wallplug UK P6 rt center pos level VI white (Alt: SWI6D-7.5-BW-P6R) RoHS : Compliant | 0 | |||
| MF10S-WP6C02-0200 | Hirose Electric Co Ltd | (Alt: CL0709-0525-9-00) RoHS : Compliant | 0 | |||
![]() Avnet Asia | LE B Q7WP-6C8C-24-0-A40-R18-Z-AM | ams OSRAM Group | OOSLE B Q7WP-6C8C-24-0-A40-R18-Z-AM Q651 (Alt: LE B Q7WP-6C8C-24-0-A40-R18-Z-AM) RoHS : Compliant | 0 | ||
| LE B Q8WP-6B7B-W3-0-A40-R18-Z-XX | ams OSRAM Group | (Alt: LE B Q8WP-6B7B-W3-0-A40-R18-Z-XX) RoHS : Compliant | 0 | |||
| NERREWP624 | Amphenol Corporation | (Alt: NERREWP624) RoHS : Compliant | 0 | |||
| LE B Q7WP-6C7C-W4-0-A40-R18-Z | ams OSRAM Group | (Alt: LE B Q7WP-6C7C-W4-0-A40-R18-Z) RoHS : Compliant | 0 | |||
| LE B Q7WP-6C8C-24-0-A40-R18-Z | ams OSRAM Group | LED Single Chip Blue 459nm 5000mA 8-Pin CSMD T/R (Alt: LE B Q7WP-6C8C-24-0-A40-R18-Z) RoHS : Compliant | 0 | |||
| LE B Q8WP-6B7B-VW-0-A40-R18-Z-XX | ams OSRAM Group | LED Single Chip Blue 448nm 5000mA 2-Pin SMD T/R (Alt: LE B Q8WP-6B7B-VW-0-A40-R18-Z-XX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RD1/4WP-62R0JT | Sanyo-Ohm | IN STOCK SHIP TODAY |
| 5,000 | |
| RD1/4WP-6K2JT | Sanyo-Ohm | IN STOCK SHIP TODAY |
| 4,800 | ||
| RD1/4WP-62R0JT | SANYO Semiconductor Co Ltd | IN STOCK SHIP TODAY |
| 4,718 | ||
| WP63GC116 | Kingbright | IN STOCK SHIP TODAY | 1,000 | |||
| AWP64-7240-T-R | ASSMANN WSW components GmbH | IN STOCK SHIP TODAY RoHS : Unknown | 7 | |||
![]() DB Roberts | SWP-640/S | Sugatsune Kogyo Co Ltd | 0 | |||
| SWP-630/S | Sugatsune Kogyo Co Ltd | 0 | ||||
| SWP-696/S | Sugatsune Kogyo Co Ltd | 0 | ||||
![]() EBV Elektronik | LE R S2WP-6P7Q-25-0-A40-R18 | ams OSRAM Group | (Alt: Q65113A8258) RoHS : Compliant | 0 | ||
| LEB Q7WP-6C8C-24-0-A40-R18-Z | ams OSRAM Group | LED Single Chip Blue 459nm 5000mA 8Pin CSMD TR (Alt: Q65113A2449) RoHS : Compliant | 0 | |||
![]() Master Electronics | WP-699254-5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester White 69.9x25.4mm RoHS : Compliant |
| 22,503 | |
| WP-699191-5-9 | TE Connectivity | Labels Thermal Transfer Printable Label Polyester White 69.9x19.1mm RoHS : Compliant |
| 11,976 | ||
| AWP-6P | Amphenol Sine Systems | 6-Position Male Wedgelock RoHS : Compliant |
| 1,000 | ||
| AWP-60-7540-T | ASSMANN WSW components GmbH | DIN 41651 RoHS : Compliant |
| 432 | ||
| AWP-64-7540-T | ASSMANN WSW components GmbH | Conn IDC Connector SKT 64 POS 2.54mm IDT ST Cable Mount RoHS : Compliant |
| 396 | ||
| AWP-6SA | Amphenol Sine Systems | 6-Position Female Wedgelock KEY A RoHS : Compliant |
| 0 | ||
| UWP60-60RJ8 | Bourns Inc | Ceramic Wirewound Resistor - 60 ohm 5% - 60W - Chassis Mount RoHS : Compliant |
| 0 | ||
| WP-610419-2.5-9 | TE Connectivity | WP-610419-2.5-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| PAWP6 | Carlo Gavazzi Holding AG | WARNING PLATE 60 MM RoHS : Compliant |
| 0 | ||
| WP-6156-WHPS | Phoenix Contact | WP 6156-WHPS RoHS : Compliant |
| 0 | ||
| UWP60-1RJ8 | Bourns Inc | Ceramic Wirewound Resistor - 1 ohm 5% - 60W - Chassis Mount RoHS : Compliant |
| 0 | ||
| UWP60-20RJ8 | Bourns Inc | Ceramic Wirewound Resistor - 20 ohm 5% - 60W - Chassis Mount RoHS : Compliant |
| 0 | ||
| UWP60-0R5J8 | Bourns Inc | Ceramic Wirewound Resistor - 0.5 ohm 5% - 60W - Chassis Mount RoHS : Compliant |
| 0 | ||
| WP-6215-WHPS | Phoenix Contact | WP 6215-WHPS RoHS : Compliant |
| 0 | ||
| AWP-6SB | Amphenol Sine Systems | 6-Position Female Wedgelock KEY B RoHS : Compliant |
| 0 | ||
![]() Neutron USA | FWP-63A22F | Eaton Bussmann | Fuse, High Speed, Cylinder, 63A, 700 VAC, 22x58 mm, Cartridge, Clip Mount, CE/UL RoHS : Compliant |
| 50 | |
| SVE06WP63 | Dwyer Instruments Inc | Solenoid valve enclosure, 6 solenoids, weatherproof enclosure, 24 VDC |
| 4 | ||
| PPC-3181SW-P65A | Advantech Co Ltd | Core i5-6300U Fanless Panel PC with 18.5" Full HD LED backlight RoHS : Compliant |
| 2 | ||
| SDM50-5-UW-P6 | CUI Inc | Desktop AC Adapter, White, 45W 5VDC 9A, AC: C14, DC: P center Str Barrel 2.5mm, No Input Cable RoHS : Compliant |
| 0 | ||
| OWP6D125 | ABB Low Voltage Products and Systems | 6mm 6Pole Switch Mechanism, CONVERSION KIT, OT30-100F3 |
| 0 | ||
| PAWP6 | Carlo Gavazzi Holding AG | Pushbutton Switches, Warning Plate, For Use With Pushbutton Switches, PB Series |
| 0 | ||
| SMI12-12-KW-P6 | CUI Inc | Wall Mount AC Adapters ac-dc, 12 Vdc, 1 A, SW, multi-blade, no blades, P6 center pos, level VI, white RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1982/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 60 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1982/WP-60 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1982/WP-60 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C1982/WP-60 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1982/WP-60 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | |
| PE3C0103/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0103/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0103/WP-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0103/WP-60 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-60 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052LF/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-240 Coax, LF Solder., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-240 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052LF/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052LF/WP-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052LF/WP-60 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C3055/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C3055/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3055/WP-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C3055/WP-60 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C6345/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6345/WP-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C6345/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C6345/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 158 | ||
| PE3C8509/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-60 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C10354/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable 60 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable 60 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP-60 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP-60 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP-60 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 13 | ||
| PE3C8507/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 7/16 DIN Female (Jack) to N Male (Plug) Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN female (jack) to N male (plug) low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low loss 7/16 DIN to type N IP68 cable assembly has a female gender on end 1 and a male on end 2. PE3C8507/WP-60 can also be known as a low loss 7/16 DIN jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8507/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN female to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN jack to type N plug cable assembly PE3C8507/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8507/WP-60 can also be used in the other direction and will be a type N male to 7/16 DIN female cable assembly if the opposite connectivity is required. Low loss 7/16 DIN jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low loss RF cable assembly as per your requirements. |
| 11 | ||
| PE3C2638/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 TNC Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male to TNC male right angle low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle TNC cable connection on the other. Our low loss TNC to right angle TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2638/WP-60 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2638/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to right angle TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C2638/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2638/WP-60 can also be used in the other direction and will be a right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2309/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2309/WP-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2309/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2309/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0033/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 60 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0033/WP-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0033/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0033/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2483/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Female (Jack) to TNC Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N female (jack) to TNC male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a female gender on end 1 and a male on end 2. PE3C2483/WP-60 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2483/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N female to TNC male cable has a maximum VSWR of 1.4:1. Type N jack to TNC plug cable assembly PE3C2483/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2483/WP-60 can also be used in the other direction and will be a TNC male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W00013/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W00013/WP-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00013/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W00013/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00013/WP-60 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6726/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 BNC Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 BNC male (plug) to N male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss BNC to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6726/WP-60 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6726/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our BNC male to type N male cable has a maximum VSWR of 1.4:1. BNC plug to type N plug cable assembly PE3C6726/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6726/WP-60 can also be used in the other direction and will be a type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Venkel Ltd. | UPTF0402-16W-P-6040CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;604R;�0.25% RoHS : Compliant | 0 | ||
| UPTF0402-16W-P-6120UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;612R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-61R9CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;61.9R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-6570DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;657R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-65R7AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;65.7R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-69R0DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;69R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-69R8AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;69.8R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-6040DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;604R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-6121DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;6.12K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-6190CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;619R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-61R2UT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;61.2R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-61R9DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;61.9R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-6260AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;626R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-6491DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;6.49K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-65R7BT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;65.7R;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | FWP-63A22FA | Cooper Industries | Electric Fuse, 63A, 700VAC, 500VDC, 200000A (IR), Inline/holder | 819 | ||
| FWP-63A22FI | Cooper Industries | Electric Fuse, 63A, 700VAC, 500VDC, 200000A (IR), Inline/holder RoHS : Compliant | 792 | |||
| FWP-600A | Cooper Industries | Electric Fuse, 600A, 700VAC, 700VDC, 50000A (IR), Inline/holder RoHS : Compliant | 235 | |||
![]() Waytek, Inc. | AWP-6S | Amphenol Sine Systems | ATP 6 Position Plug Wedgelock |
| 784 | |
| AWP-6P | Amphenol Sine Systems | ATP 6 Position Receptacle Wedgelock |
| 569 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |