 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
WP4M Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | LW P4SG-V2AA-LKOL-1-ZI | ams OSRAM Group | - Tape and Reel (Alt: Q65111A0015) RoHS : Compliant | 3,000 | ||
| AWP-4P | Amphenol Corporation | Connector Accessory, Orange, Thermoplastic, Wedgelock, ATP Series 4 Position Receptacle Connectors - Boxed Product (Development Kits) (Alt: AWP-4P) RoHS : Compliant |
| 2,007 | ||
| AWP-4S | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AWP-4S) RoHS : Compliant |
| 75 | ||
| NRWP471M160V18X40F | NIC Components Corp | Electrolytic Capacitor, 470 uF, 160 V, ? 20%, Radial Leaded, 2000 hours @ 105?C, Polar, 7.5 mm - Bulk (Alt: NRWP471M160V18X40F) RoHS : Compliant |
| 0 | ||
| NRWP471M6.3V6.3X11TBF | NIC Components Corp | Electrolytic Capacitor, 470 uF, 6.3 V, ? 20%, Radial Leaded, 1000 hours @ 105?C, Polar, 2.5 mm - Ammo Pack (Alt: NRWP471M6.3V6.3X11TBF) RoHS : Compliant |
| 0 | ||
| PLWP40SC-D30 | Panduit Corp | Cable Tie, 1.58" Bundle Dia, 7"" Length, Nylon 6.6, Indoor, Black, 50 lbs" - Bag (Alt: PLWP40SC-D30) RoHS : Compliant |
| 0 | ||
| NRWP4R7M100V5X11F | NIC Components Corp | Electrolytic Capacitor, 4.7 uF, 100 V, ? 20%, Radial Leaded, 1000 hours @ 105?C, Polar, 2 mm, 5 mm - Bulk (Alt: NRWP4R7M100V5X11F) RoHS : Compliant |
| 0 | ||
| NRWP4R7M50V5X11TBF | NIC Components Corp | Electrolytic Capacitor, 4.7 uF, 50 V, ? 20%, Radial Leaded, 1000 hours @ 105?C, Polar, 2 mm, 5 mm - Ammo Pack (Alt: NRWP4R7M50V5X11TBF) RoHS : Compliant |
| 0 | ||
| FWP-40 | Eaton Corporation | - Bulk (Alt: FWP-40) RoHS : Not Compliant |
| 0 | ||
| WWP4JB30R0-FL | SEI Stackpole Electronics Inc | Resistor Pulse Withstanding 30 Ohm 5% 4W Axial Leaded Bulk - Tape and Reel (Alt: WWP4JB30R0-FL) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-FK0PM0-46 | ams OSRAM Group | PointLED White - Tape and Reel (Alt: Q65111A7805) RoHS : Compliant | 0 | |||
| NRWP4R7M400V10X12.5F | NIC Components Corp | Electrolytic Capacitor, 4.7 uF, 400 V, ? 20%, Radial Leaded, 2000 hours @ 105?C, Polar, 5 mm, 10 mm - Bulk (Alt: NRWP4R7M400V10X12.5F) RoHS : Compliant |
| 0 | ||
| BH12WP-4SC | Hirose Electric Co Ltd | Conn Circular Housing Inline Housing PL SKT 4 POS PBT (Polybutylene Terephthalate) Bag - Bag (Alt: BH12WP-4SC) RoHS : Compliant |
| 0 | ||
| FWP-40A | Eaton Corporation | - Bulk (Alt: FWP-40A) RoHS : Compliant |
| 0 | ||
| FWP-40G22F | Eaton Corporation | Miniature Fuse without Striker 40A 690VAC High Speed 2-Pin Cartridge Holder - Bulk (Alt: FWP-40G22F) RoHS : Compliant |
| 0 | ||
 Newark | WP4S-82RJA2 | TT Electronics Welwyn Components | Res, 82R, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-82RJA2 RoHS : Compliant |
| 1,280 | |
| WP4S-1RJA2 | TT Electronics Welwyn Components | Res, 1R, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-1RJA2 RoHS : Compliant |
| 1,191 | ||
| WP4S-33RJA2 | TT Electronics Welwyn Components | Res, 33R, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-33RJA2 RoHS : Compliant |
| 875 | ||
| AWP-4SB | Amphenol Sine Systems | Wedgelock, Black, Thermoplastic, 4Pos; Accessory Type:Wedgelock; For Use With:Atp Series 4 Position Plug Connectors; Product Range:Atp Series Rohs Compliant: Yes |Amphenol Sine/tuchel AWP-4SB RoHS : Compliant |
| 550 | ||
| MWP403K-WT | L-com Inc | Faceplate, 4.7" X 2.8"; |L-Com MWP403K-WT RoHS : Compliant |
| 477 | ||
| WP4S-12RJA2 | TT Electronics Welwyn Components | Res, 12R, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-12RJA2 RoHS : Compliant |
| 402 | ||
| WP4S-27RJA2 | TT Electronics Welwyn Components | Res, 27R, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-27RJA2 RoHS : Compliant |
| 358 | ||
| MWP41KS-WT | L-com Inc | Faceplate, 1.86" X 0.97", Insert Plate; |L-Com MWP41KS-WT RoHS : Compliant |
| 357 | ||
| WP4S-18RJA2 | TT Electronics Welwyn Components | Res, 18R, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-18RJA2 RoHS : Compliant |
| 257 | ||
| WP4S-2R7JA2 | TT Electronics Welwyn Components | Res, 2R7, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-2R7JA2 RoHS : Compliant |
| 146 | ||
| WP4S-R56JA2 | TT Electronics Welwyn Components | Res, 0R56, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-R56JA2 RoHS : Compliant |
| 87 | ||
| BH12WP-4SC | Hirose Electric Co Ltd | Circular Conn, Plug, 4Pos, Crimp; |Hirose/hrs BH12WP-4SC RoHS : Compliant |
| 82 | ||
| AWP-4SD | Amphenol Sine Systems | Wedgelock, Brown, Thermoplastic, 4Pos; Accessory Type:Wedgelock; For Use With:Atp Series 4 Position Plug Connectors; Product Range:Atp Series Rohs Compliant: Yes |Amphenol Sine/tuchel AWP-4SD RoHS : Compliant |
| 46 | ||
| WP4S-1R8JA1 | TT Electronics Welwyn Components | Res, 1R8, 5%, 4W, Axial, Wirewound; |Tt Electronics/welwyn WP4S-1R8JA1 RoHS : Compliant |
| 12 | ||
| UWP40DLB50P | Carlo Gavazzi Holding AG | Load Management Controller, 50 Plug; |Carlo Gavazzi UWP40DLB50P RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | MAX77813EWP45+T | Analog Devices Inc | High-Efficiency Buck-Boost Reg RoHS : Compliant |
| 2,157,500 | |
| MAX77813EWP45+ | Analog Devices Inc | High-Efficiency Buck-Boost Reg RoHS : Compliant | 1,223 | |||
 RS | WP-4S | TE Connectivity | CONNECTOR, WEDGE LOCK, 4 POSITION, PBT GF, ORANGE, WIRE-TO-WIRE, DTP SERIES RoHS : Compliant |
| 3,992 | |
| WP-4P | TE Connectivity | CONNECTOR, WEDGE LOCK, PBT GF, 4 POSITION, ORANGE, WIRE TO WIRE, UL 94-HB RoHS : Compliant |
| 1,920 | ||
| AWP-4S | Amphenol Sine Systems | 4-WAY WEDGELOCK PLUG |
| 1,068 | ||
| AWP-4P | Amphenol Sine Systems | 4-WAY WEDGELOCK RECEPTACLE |
| 983 | ||
| WP483GDT | Kingbright | LED T-1 3/4 5MM DOME WIRE LEADS 2.4V FORWARD VOLTAGE 3MCD DIFFUSED GREEN RoHS : Compliant |
| 292 | ||
| WP424GDT | Kingbright | LED T-1 3MM DOME WIRE LEADS 2.4V FORWARD VOLTAGE 6MCD DIFFUSED GREEN RoHS : Compliant |
| 57 | ||
| FWP-40A14F | Eaton Bussmann | FUSE CARTRIDGE FAST BLOW HOLDER MOUNT 700VAC/DC 40A RoHS : Compliant |
| 34 | ||
| FWP-40A22F | Eaton Bussmann | FUSE CARTRIDGE FAST BLOW HOLDER MOUNT 700VAC/DC 40A RoHS : Compliant |
| 8 | ||
| WP459 | Leviton Manufacturing Co | WETGUARD RECEPTACLE, BLANK PLATE AND GASKET, YELLOW, RESISTANT TO ELEMENTS |
| 5 | ||
| NCN50-FP-W-P4 (182960) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR 50MM RANGE 20-253VAC SCREW TERMINALS |
| 4 | ||
| FWP-450A | Eaton Bussmann | FUSE CARTRIDGE BLADE FAST BLOW STUD MOUNT 700VAC/DC 450A |
| 1 | ||
| FPM-221W-P4AE | Advantech Co Ltd | INDUSTRIAL MONITOR, TFT LED LCD, CAPACITIVE TOUCH, 21.5 IN, HDMI, FPM-200, ADVIM |
| 1 | ||
| FPM-215W-P4BE | Advantech Co Ltd | INDUSTRIAL MONITOR, 15.6 IN CAPACITIVE TOUCH, HDMI, TFT LED LCD, FPM-200 SERIES |
| 1 | ||
| RGC316T53WP44 | Eaton Cutler-Hammer | 3P NGF 1600A DT 510 LS 100KA R FRAME BKR W/RATING PLUG |
| 0 | ||
| MDBT80-250Z-W-P4DWSC | SMC Corporation of America | CYLINDER, TIE ROD, MB-Z SERIES |
| 0 | ||
 Microchip Technology Inc | WP441W6A1-400-NFEI | Microchip Technology Inc | WP4 41W6,No Enc,400Mh,LFballs,PBFbump,A1, HBBGA, Projected EOL: 2045-10-10 RoHS : Compliant |
| 1,092 | |
| WP441W6A1-500-NFEI | Microchip Technology Inc | WP4 41W6,No Enc,500Mh,LFballs,PBFbump,A1, HBBGA, Projected EOL: 2045-10-10 RoHS : Compliant |
| 441 | ||
| WP441W6A1-500-EFEI | Microchip Technology Inc | WP4 41W6,Enc,500Mh,LFballs,PBFbump,A1, HBBGA, Projected EOL: 2045-10-10 RoHS : Compliant |
| 357 | ||
| WP441W6A1-400-EFEI | Microchip Technology Inc | WP4 41W6,Enc,400Mh,LFballs,PBFbump,A1, HBBGA, Projected EOL: 2045-10-10 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | WWP471ACAAAA | Generic Manufacturer | 15 | |||
 Rochester Electronics | LW P473-Q2R2-LML-1-10-R18F-Z-F | ams OSRAM Group | LW P473-Q2R2 - LED White 1 Clear 2-SMD Surface Mount T/R RoHS : Compliant |
| 12,000 | |
| LW P473-Q2S1-FK0PN0-3B5A-10-R18-Z | ams OSRAM Group | LW P473 - POINTLED, White LED |
| 54,000 | ||
| LW P4SD-Q2S1-GK0NM0-S424-2-R18 | ams OSRAM Group | LED White ThinGaN Reverse Mounting 2-SMD T/R RoHS : Compliant |
| 189,000 | ||
| LW P4SD-Q2S1-GK0NM0-S424-2-R18F | ams OSRAM Group | LED White ThinGaN Top Mounting 2-SMD T/R RoHS : Compliant |
| 9,000 | ||
| LW P4SG-V2AB-JKPL-45-20-S | ams OSRAM Group | LED White 1 LED Diffused 2-SMD T/R RoHS : Compliant | 3,000 | |||
 Sager | PLWP40SC-D30 | Panduit Corp | Cable Tie Mounts Wing Push Mount Tie Center Mounted 7.0 |
| 1,500 | |
| WP424IDT | Kingbright | Standard LEDs - Through Hole 3mm FLAT TOP RED DIF RoHS : Compliant |
| 66 | ||
| WP40R24S05N | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | |||
| FWP-40BI | Eaton Bussmann | Specialty Fuses 40Amp SEMICONDUCTOR FUSE WITH INDICATOR | 0 | |||
| SQ5153WP48RSM | TE Connectivity | TE Connectivity | 0 | |||
| WP40R48T512 | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | |||
| FWP-40 | Eaton Bussmann | Specialty Fuses SEMI CONDUCTOR FUSE |
| 0 | ||
| FWP-40A | Eaton Bussmann | Specialty Fuses RECOMMEND FWP-40B |
| 0 | ||
| FWP-40G22F | Eaton Bussmann | Cartridge Fuses Fuse 40A 690VAC gR 22x58 |
| 0 | ||
| MF11BMT-WP4CHA02 | Hirose Electric Co Ltd | Fiber Optic Connectors | 0 | |||
| WP40R48S12 | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | |||
| FWP-450 | Eaton Bussmann | Specialty Fuses SEMI CONDUCTOR FUSE |
| 0 | ||
| SR30D-10WP-4PA(71) | Hirose Electric Co Ltd | Standard Circular Connector 4P PLUG | 0 | |||
| PLWP40SD-D30 | Panduit Corp | Cable Tie Mounts Wing Push Mount Tie Center Mounted 7.0 |
| 0 | ||
| WP40R48S05 | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | |||
 TME | WP4S-10RJA1 | TT Electronics plc | Resistor: wire-wound; 10Ω; 4W; 13x5.6mm; -55÷155°C; axial; L: 13mm |
| 3,676 | |
| AWP-40 | Ninigi | Connector: IDC; plug; female; PIN: 40; IDC; for ribbon cable; 2.54mm |
| 2,359 | ||
| WP4S-47RJA1 | TT Electronics plc | Resistor: wire-wound; 47Ω; ceramic; 4W; 13x5.6mm; -55÷155°C; axial |
| 1,400 | ||
| WP4S-1R5JA1 | TT Electronics plc | Resistor: wire-wound; 1.5Ω; 4W; -55÷155°C; 200ppm/°C; axial; L: 13mm |
| 1,300 | ||
| WP4S-270RJA1 | TT Electronics plc | Resistor: wire-wound; 270Ω; 4W; ±5%; 13x5.6mm; -55÷155°C; axial |
| 1,210 | ||
| WP4S-15RJA1 | TT Electronics plc | Resistor: wire-wound; 15Ω; 4W; 13x5.6mm; -55÷155°C; axial; L: 13mm |
| 650 | ||
| UQS-8W-120LED-W-WP-48V-40M | POS | LED tape; white cold; Case (mm): 2835; LED/m: 120; 10mm; IP65; 120° |
| 40 | ||
| FWP-40A14F | Eaton Bussmann | Fuse: fuse; 14x51mm; ceramic,cylindrical,industrial; 40A; 660VAC RoHS : Compliant |
| 12 | ||
| FPM-215W-P4AE | Advantech Co Ltd | Automation module: HMI panel; 12VDC; USB; HDMI; FPM; 15.6"; 0÷50°C |
| 0 | ||
| AWP-4SD | Amphenol Corporation | Secondary lock |
| 0 | ||
| AWP-4PB | Amphenol Corporation | Secondary lock |
| 0 | ||
| AWP-4PD | Amphenol Corporation | Secondary lock |
| 0 | ||
| F161WP474K050V | KEMET Corporation | Capacitor: polyester; 470nF; 30VAC; 50VDC; ±10%; F161; SMD; 4036 RoHS : Compliant |
| 0 | ||
| AWP-4PC | Amphenol Corporation | Secondary lock |
| 0 | ||
| AWP-4PA | Amphenol Corporation | Secondary lock |
| 0 | ||
 Ameya Holding Limited | LW P4SG-V2AA-JM0-46-20-R18F-Z-XX | OSRAM Opto Semiconductors | 19,402 | |||
 ComSIT USA | WP4S39RJA1 | TT Electronics Welwyn Components | Fixed Resistor, Wire Wound, 4W, 39ohm, 100V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 35,000 | ||
| LWP4SG | OSRAM GmbH | Single Color LED, White RoHS : Compliant | 15,000 | |||
| WP4S47RJA1 | TT Electronics Welwyn Components | Fixed Resistor, Wire Wound, 4W, 47ohm, 100V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 13,000 | |||
| LWP4SGV2ABJK0JL04620R18XX | OSRAM GmbH | LED White 1 LED Diffused 2-SMD RoHS : Compliant | 9,000 | |||
| LWP473R15L4B | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 9,000 | |||
| LWP4SG-ABLK4 | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 6,000 | |||
| LWP473R16L5A | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP473Q26L5A | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP473R15K4B | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP4SG-AAML4 | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP473Q25L5A | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP473Q25L | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP473 | OSRAM GmbH | Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP473Q26L4B | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
| LWP4SGBINAANL520 | OSRAM GmbH | POINTLED FLEXIBLE SPACE SAVER Single Color LED, White RoHS : Compliant | 3,000 | |||
 Interstate Connecting Components | AWP-4P | Amphenol Sine Systems |
| 1,376 | ||
| AWP-4SB | Amphenol Sine Systems | 4 POSITION SOCKET WEDGELOCK, K | 0 | |||
| AWP-4SD | Amphenol Sine Systems | 4 POSITION SOCKET WEDGELOCK, K | 0 | |||
| AWP-4PA | Amphenol Sine Systems | 4 POSITION RECEPTACLE WEDGELOC |
| 0 | ||
| WP-445064-10-9 | TE Connectivity | A47982-000 RoHS : Compliant |
| 0 | ||
| WP-445102-5-9 | TE Connectivity | TYCO PN: D24083-000 RoHS : Compliant |
| 0 | ||
| AWP-4PD | Amphenol Sine Systems | 4 POSITION RECEPTACLE WEDGELOC | 0 | |||
| WP-41 | Amphenol Industrial Operations | 0 | ||||
| AWP-4SA | Amphenol Sine Systems | 4 POSITION SOCKET WEDGELOCK, K | 0 | |||
| WP-445445-2-9 | TE Connectivity | E81542-000 RoHS : Compliant |
| 0 | ||
| WP-406254-1.5-9 | TE Connectivity | 1-1200603-9,E71523-000 RoHS : Compliant |
| 0 | ||
| AWP-4PB | Amphenol Sine Systems | 4 POSITION RECEPTACLE WEDGELOC WEDGELOCKS |
| 0 | ||
| WP-478175-5-9 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| AWP-4PC | Amphenol Sine Systems | 4 POSITION RECEPTACLE WEDGELOC | 0 | |||
| AWP-4SC | Amphenol Sine Systems | 4 POSITION SOCKET WEDGELOCK, K | 0 | |||
 NexGen Digital | RD12WP-47R0JT | SANYO Semiconductor Co Ltd | 2,062 | |||
 PEI Genesis | AWP-4S | Amphenol Sine Systems |
| 1 | ||
| AWP-4SB | Amphenol Sine Systems |
| 0 | |||
| AWP-4SD | Amphenol Sine Systems |
| 0 | |||
| AWP-4PA | Amphenol Sine Systems |
| 0 | |||
| AWP-4PD | Amphenol Sine Systems |
| 0 | |||
| AWP-4SA | Amphenol Sine Systems |
| 0 | |||
| AWP-4P | Amphenol Sine Systems |
| 0 | |||
| AWP-4PB | Amphenol Sine Systems |
| 0 | |||
| AWP-4PC | Amphenol Sine Systems |
| 0 | |||
| AWP-4SC | Amphenol Sine Systems |
| 0 | |||
 Powell Electronics | AWP-4S | Amphenol Sine Systems | 4 Pos Wedgelock Plug |
| 3,367 | |
| AWP-4SA | Amphenol Sine Systems | 4 Position Socket Wedgelock Keyed A |
| 3,267 | ||
| AWP-4SB | Amphenol Sine Systems | 4 Position Socket Wedgelock Keyed B |
| 726 | ||
| AWP-4PD | Amphenol Sine Systems | 4 Position Receptacle Wedgelock Keyed D |
| 545 | ||
| AWP-4SC | Amphenol Sine Systems | 4 Position Socket Wedgelock Keyed C |
| 363 | ||
| AWP-4P | Amphenol Sine Systems | 4 Pos Wedgelock Receptacle |
| 224 | ||
| AWP-4PC | Amphenol Sine Systems | 4 Position Receptacle Wedgelock Keyed C |
| 182 | ||
 Richardson RFPD | TGBWP45-NC | Amphenol PCTEL | Mobile Antennas RoHS : Not Compliant |
| 0 | |
| TGBWP45FFME | Amphenol PCTEL | Mobile Antennas | 0 | |||
| WP482P45110US | WAVEPIA Co., Ltd | 2.45GHz 110W GaN Discrete Unmatched Transistor RoHS : Not Compliant | 0 | |||
| AAT3687IWP-4.2-1-T1 | Skyworks Solutions Inc | Battery Charger Li-Ion/Li-Pol 1500mA 4.2V 12-Pin T RoHS : Compliant | 0 | |||
| TGBWP45C-NC | Amphenol PCTEL | TRNK/HD/ BRKT, 45 DEG CBL, RG58/U NO CONN. RoHS : Not Compliant |
| 0 | ||
| TGBWP45PL | Amphenol PCTEL | Mobile Antennas RoHS : Not Compliant |
| 0 | ||
 Rutronik | AWP-4P | Amphenol Interconnect Products Inc | 04P ATP RECEPTACLE WEDGE ORANGE RoHS : Compliant |
| 1,200 | |
| AWP-4S | Amphenol Interconnect Products Inc | 04P ATP PLUG WEDGE ORANGE RoHS : Compliant |
| 1,200 | ||
 Chip 1 Exchange | LWP473-Q2S1-5K6L | OSRAM GmbH | INSTOCK | 45,000 | ||
| LW P4SG-AABA-IL0-46-20-R18-Z-XX | OSRAM GmbH | INSTOCK | 30,000 | |||
| WP-4S | TE Connectivity | INSTOCK RoHS : Compliant | 17,579 | |||
| WP-4P | TE Connectivity | INSTOCK RoHS : Compliant | 16,857 | |||
| LWP4SG-V2AB-IM0-46-20-R1 | OSRAM GmbH | INSTOCK | 3,000 | |||
| LWP4SG-AA-IK0-4 | OSRAM GmbH | INSTOCK | 2,663 | |||
| ECO-S2WP470BA | INSTOCK | 91 | ||||
| WP441W6A1-500-EFEI | Microchip Technology Inc | INSTOCK RoHS : Compliant | 2 | |||
 Avnet Abacus | WP-4P | TE Connectivity | Connector Accessory Orange Wedge Lock Deutsch DTP Series 4Pos Receptacle Connectors DTP (Alt: WP-4P) RoHS : Compliant | 10,000 | ||
| WP-4S | TE Connectivity | Secondary Wedge Lock for Deutsch DTDTP Series 4 Position Plug Automotive Connectors Glass Filled P (Alt: WP-4S) RoHS : Compliant | 6,845 | |||
| AWP-4P | Amphenol Corporation | Connector Accessory Orange Thermoplastic Wedgelock ATP Series 4 Position Receptacle Connectors (Alt: AWP-4P) RoHS : Compliant | 1,200 | |||
| AWP-4S | Amphenol Corporation | (Alt: AWP-4S) RoHS : Compliant | 1,200 | |||
| WP-4P | TE Connectivity | Connector Accessory Orange Wedge Lock Deutsch DTP Series 4Pos Receptacle Connectors DTP (Alt: WP-4P) RoHS : Compliant | 0 | |||
| BH12WP-4SC | Hirose Electric Co Ltd | (Alt: CL0140-0010-0-00) RoHS : Compliant | 0 | |||
| ECET2WP471EA | Panasonic Electronic Components | Electrolytic Capacitor 470uF 450V 20 SnapIn (Alt: ECET2WP471EA) RoHS : Compliant | 0 | |||
| ECOS2WP471EA | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 450 V 20 SnapIn 3000 hours 85C TSUP Series 35 mm 50 mm (Alt: ECOS2WP471EA) RoHS : Compliant | 0 | |||
| ECOS2WP470BA | Panasonic Electronic Components | Electrolytic Capacitor 47 uF 450 V 20 SnapIn 3000 hours 85C TSUP Series 22 mm 25 mm (Alt: ECOS2WP470BA) RoHS : Compliant | 0 | |||
| ECEC2WP471EA | Panasonic Electronic Components | Electrolytic Capacitor 470uF 450V 20 SnapIn (Alt: ECEC2WP471EA) RoHS : Compliant | 0 | |||
| ECOS2WP470CL | Panasonic Electronic Components | Electrolytic Capacitor 47 uF 450 V 20 SnapIn 3000 hours 85C TSUP Series 25 mm 20 mm (Alt: ECOS2WP470CL) RoHS : Compliant | 0 | |||
| F161WP474K050V | KEMET Corporation | General Purpose Film Capacitor Metallized PET Stacked 4036 10091 Metric 047 uF 10 30 V - Tape and Reel (Alt: F161WP474K050V) RoHS : Compliant | 0 | |||
| F161WP474K063V | KEMET Corporation | General Purpose Film Capacitor Metallized PET Stacked 4036 10091 Metric 047 uF 10 40 V - Tape and Reel (Alt: F161WP474K063V) RoHS : Compliant | 0 | |||
| F161WP473K250V | KEMET Corporation | General Purpose Film Capacitor Metallized PET Stacked 4036 10091 Metric 0047 uF 10 160 V - Tape and Reel (Alt: F161WP473K250V) RoHS : Compliant | 0 | |||
| F125WP474J050V | KEMET Corporation | Film Capacitor 047 uF 30 V 50 V 5 Metallized PPS 4036 10291 Metric - Tape and Reel (Alt: SMC10.2474J50A31TR16) RoHS : Compliant | 0 | |||
Avnet Asia | LW P4SG-V2AB-JKPL-1-20-R18F-ZI | ams OSRAM Group | (Alt: LW P4SG-V2AB-JKPL-1-20-R18F-ZI) RoHS : Compliant | 0 | ||
| LW P4SG-V2AB-JM0-46-20-R18F-XX | ams OSRAM Group | (Alt: LW P4SG-V2AB-JM0-46-20-R18F-XX) RoHS : Compliant | 0 | |||
| LWP4SG-V2AB-NKOL-1-20-R18F-ZI-XX | ams OSRAM Group | (Alt: LWP4SG-V2AB-NKOL-1-20-R18F-ZI-XX) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-JM0-45-20-R18-XX | ams OSRAM Group | OOSLW P4SG-V2AB-JM0-45-20-R18-XX Q65112A (Alt: LW P4SG-V2AB-JM0-45-20-R18-XX) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-JM0-46-20-R18-XX | ams OSRAM Group | LED Chip White x=0.33/y=0.33 20mA 2-Pin SMD T/R (Alt: LW P4SG-V2AB-JM0-46-20-R18-XX) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-FK0PN0-45-20-S | ams OSRAM Group | LED Chip White 20mA 2-Pin SMD T/R (Alt: LW P4SG-V2AB-FK0PN0-45-20-S) RoHS : Compliant | 0 | |||
| NRWP470M35V5X11F | NIC Components Corp | Electrolytic Capacitor, 47 uF, 35 V, ? 20%, Radial Leaded, 1000 hours @ 105?C, Polar, 2 mm, 5 mm (Alt: NRWP470M35V5X11F) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-FK0PN0-45-20-SF | ams OSRAM Group | LED Chip White 20mA 2-Pin SMD T/R (Alt: LW P4SG-V2AB-FK0PN0-45-20-SF) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-NKOL-1-20-R18-ZI-XX | ams OSRAM Group | (Alt: LW P4SG-V2AB-NKOL-1-20-R18-ZI-XX) RoHS : Compliant | 0 | |||
| LW P4SG-V2AA-LKOL-1-20-R18-ZI | ams OSRAM Group | (Alt: LW P4SG-V2AA-LKOL-1-20-R18-ZI) RoHS : Compliant | 0 | |||
| LW P4SG-AAAB-HL0-45-20-R18-XX | ams OSRAM Group | OOSLW P4SG-AAAB-HL0-45-20-R18-XX Q65113A (Alt: LW P4SG-AAAB-HL0-45-20-R18-XX) RoHS : Compliant | 0 | |||
| LW P4SG-V2AB-JKPL-1-20-R18-ZI | ams OSRAM Group | (Alt: LW P4SG-V2AB-JKPL-1-20-R18-ZI) RoHS : Compliant | 0 | |||
| AWP-4S | Amphenol Corporation | (Alt: AWP-4S) RoHS : Compliant | 0 | |||
| WP-4P | TE Connectivity | Connector Accessory, Orange, Wedge Lock, Deutsch DTP Series 4Pos Receptacle Connectors, DTP (Alt: WP-4P) RoHS : Compliant | 0 | |||
 Avnet Silica | WP441W6A1-400-NFEI | Microchip Technology Inc | WP4 41W6No Enc400MhLFballsPBFbumpA1 (Alt: WP441W6A1-400-NFEI) RoHS : Compliant | 0 | ||
| WP441W6A1-500-NFEI | Microchip Technology Inc | PMCWP441W6A1500NFEI WP4 41W6NO ENC 50 (Alt: WP441W6A1-500-NFEI) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | RD1/4WP-470RJT | Sanyo-Ohm | IN STOCK SHIP TODAY |
| 5,500 | |
| RD1/4WP-47R0-JT | Sanyo-Ohm | IN STOCK SHIP TODAY |
| 5,385 | ||
| WP4L+ | Mini-Circuits | IN STOCK SHIP TODAY RoHS : Compliant |
| 897 | ||
| RD1/2WP-47R0JT | Sanyo-Ohm | IN STOCK SHIP TODAY |
| 380 | ||
| WP4060VH/2GD | Kingbright | IN STOCK SHIP TODAY RoHS : Compliant |
| 92 | ||
| WP48S15/2000U | Artesyn Embedded Technologies | IN STOCK SHIP TODAY | 1 | |||
 EBV Elektronik | WP441W6A1-400-NFEI | Microchip Technology Inc | WP4 41W6No Enc400MhLFballsPBFbumpA1 (Alt: WP441W6A1-400-NFEI) RoHS : Compliant | 0 | ||
| WP441W6A1-500-NFEI | Microchip Technology Inc | PMCWP441W6A1500NFEI WP4 41W6NO ENC 50 (Alt: WP441W6A1-500-NFEI) RoHS : Compliant | 0 | |||
| LWP4SG-V2AB-FK0PN0-45-20-S | ams OSRAM Group | LED Chip White 20mA 2Pin SMD TR (Alt: Q65113A0987) RoHS : Compliant | 0 | |||
| LWP4SG-V2AB-FK0PN0-45-20-SF | ams OSRAM Group | LED Chip White 20mA 2Pin SMD TR (Alt: Q65113A0989) RoHS : Compliant | 0 | |||
| LWP4SD-Q2S1-GK0NM0-S424-2-R18 | ams OSRAM Group | (Alt: Q65113A6788) RoHS : Compliant | 0 | |||
| LW P4SD-Q2S1-GK0NM0-S424-2-R18F | ams OSRAM Group | (Alt: Q65113A6787) RoHS : Compliant | 0 | |||
 Maritex | WP-4S | TE Connectivity | Connectors Accessories; WP-4S; TE CONNECTIVITY; Yes; Orange; 4; 4 RoHS : Compliant |
| 3,601 | |
| AWP-4P | Amphenol Corporation | Connectors Accessories; AWP-4P; AMPHENOL RoHS : Compliant |
| 944 | ||
| AWP-4S | Amphenol Corporation | Connectors Accessories; AWP-4S; AMPHENOL RoHS : Compliant |
| 300 | ||
 Master Electronics | WP4 | Philmore | Speakers 15W 8Ohm Round RoHS : Compliant |
| 65 | |
| WP4S-150RJA1 | TT Electronics Welwyn Components | RoHS : Compliant |
| 0 | ||
| WP4S-82RJA1 | TT Electronics Welwyn Components | Fixed Resistor Wire Wound 4W 82ohm 100V 5% +/-Tol 200ppm/Cel Through Hole Mount RoHS : Compliant |
| 0 | ||
| WP4S-1K0JA1 | TT Electronics Welwyn Components | Welwyn/tt Electronics 53896111 RoHS : Compliant |
| 0 | ||
| WP4S-68RJA1 | TT Electronics Welwyn Components | Fixed Resistor Wire Wound 4W 68ohm 100V 5% +/-Tol 200ppm/Cel Through Hole Mount RoHS : Compliant |
| 0 | ||
| WP4S-R39JA1 | TT Electronics Welwyn Components | .39 Ohm 5% 4W RoHS : Compliant |
| 0 | ||
| UWP40-100RJ8 | Bourns Inc | Ceramic Wirewound Resistor - 100 ohm 5% - 40W - Chassis Mount RoHS : Compliant |
| 0 | ||
| AWP-4SB | Amphenol Sine Systems | 4 position Socket Wedgelock Keyed B RoHS : Compliant |
| 0 | ||
| WP4S-1R8JA1 | TT Electronics Welwyn Components | Fixed Resistor Wire Wound 4W 1.8ohm 100V 5% +/-Tol 200ppm/Cel Through Hole Mount RoHS : Compliant |
| 0 | ||
| WP4S-27RJA1 | TT Electronics Welwyn Components | Fixed Resistor Wire Wound 4W 27ohm 100V 5% +/-Tol 200ppm/Cel Through Hole Mount RoHS : Compliant |
| 0 | ||
| UWP40-50RJ8 | Bourns Inc | Ceramic Wirewound Resistor - 50 ohm 5% - 40W - Chassis Mount RoHS : Compliant |
| 0 | ||
| WP4S-10RJA1 | TT Electronics Welwyn Components | CoC and 2-years warranty / RFQ for pricing RoHS : Compliant |
| 0 | ||
| WP4S-47RJA1 | TT Electronics Welwyn Components | Res Wirewound 47 Ohm 5% 4W ?200ppm/C Ceramic AXL Ammo RoHS : Compliant |
| 0 | ||
| WP4S-100RJA1 | TT Electronics Welwyn Components | RoHS : Compliant |
| 0 | ||
| UWP40-0R5J8 | Bourns Inc | Ceramic Wirewound Resistor - 0.5 ohm 5% - 40W - Chassis Mount RoHS : Compliant |
| 0 | ||
 Neutron USA | FWP-40A14F | Eaton Bussmann | Fuse Cartridge Fast Blow Holder Mount 700VAC/DC 40A RoHS : Compliant |
| 50 | |
| FPM-221W-P4AE | Advantech Co Ltd | 21.5" Full HD Ind Monitor with P-CAP Touch Control, Direct HDMI Port |
| 10 | ||
| FWP-40A22F | Eaton Bussmann | Fuse Cartridge Fast Blow Holder Mount 700VAC/DC 40A RoHS : Compliant |
| 8 | ||
| NCN50-FP-W-P4 | PEPPERL + FUCHS AUTOMATION | Inductive Prox Sensor, Rectang non-flush, R: 50mm, 20-253VAC, 2wire 20Hz NO/NC, Screw Terminals |
| 8 | ||
| FPM-215W-P4AE | Advantech Co Ltd | 15.6" WXGA Ind. Monitor, w/ PCAP touch |
| 2 | ||
| NCB40-FP-W-P4 | PEPPERL + FUCHS AUTOMATION | Inductive Proximity Sensor, Sq head, R: 40mm flush, 2-wire AC NO/NC, Screw terminals |
| 2 | ||
| FWP-40A | Eaton Bussmann | Specialty Fuses RECOMMEND FWP-40B |
| 0 | ||
 Pasternack Enterprises US | PE3C0044/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0044/WP-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0044/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C0044/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0044/WP-48 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | |
| PE3C0104/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male to SMA male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0104/WP-48 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0104/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0104/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0104/WP-48 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3C0121/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 48 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0121/WP-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0121/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C0121/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0121/WP-48 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3C0052/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052LF/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax, LF Solder., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052LF/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052LF/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052LF/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0103/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0103/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0103/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0103/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C10354/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable 48 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP-48 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP-48 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP-48 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 13 | ||
| PE3C10351/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low PIM Cable 48 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10351/WP-48 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10351/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C10351/WP-48 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 6 | ||
| PE3C10353/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low PIM Cable 48 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10353/WP-48 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10353/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C10353/WP-48 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10353/WP-48 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 3 | ||
| PE3C0031/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0031/WP-48 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0031/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3C0031/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0031/WP-48 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0033/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0033/WP-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0033/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0033/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0033LF/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0033LF/WP-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0033LF/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0033LF/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0038/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0038/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0038/WP-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0038/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0046/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0046/WP-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0046/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0046/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0616/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-48 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-48 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 TE Connectivity | WP-4S | TE Connectivity | WEDGE LOCK, 4P, PLG, ORG, DTP Number of Positions: 4 Primary Product Color: Orange Connector & Contact Retention Accessory Type: Secondary Lock Primary Product Material: PBT Operating Temperature Range: -55 – 125 °C Deutsch Dtp Wedgelock | 4 Orange | Part Number: WP-4S | Internal Number: WP-4S | Alias Number: ZPF000000000131485 | PBT | TE Connectivity RoHS : Compliant |
| 104,207 | |
| WP-4P | TE Connectivity | WEDGE LOCK, 4P, REC, ORG, DTP Number of Positions: 4 Primary Product Color: Orange Connector & Contact Retention Accessory Type: Secondary Lock Primary Product Material: PBT Operating Temperature Range: -55 – 125 °C Deutsch Dtp Wedgelock | 4 Orange | Part Number: WP-4P | Internal Number: WP-4P | Alias Number: ZPF000000000131484 | PBT | TE Connectivity RoHS : Compliant |
| 43,022 | ||
 Venkel Ltd. | UPTF0402-16W-P-4121CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.12K;�0.25% RoHS : Compliant | 0 | ||
| UPTF0402-16W-P-4221AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.22K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4270CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;427R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4320BT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;432R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4321DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.32K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4321UT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.32K;�0.01% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4580AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;458R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4580DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;458R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4811DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.81K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4871BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.87K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4930DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;493R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4990BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;499R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4991UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.99K;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-4020UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;402R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-4070UT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;407R;�0.01% RoHS : Compliant | 0 | |||
 Vyrian | F161WP474J100V | KEMET Corporation | Film Capacitor, Polyester, 100V, 5% +Tol, 5% -Tol, 0.47uF, Surface Mount, 4036 | 17,373 | ||
UCC3958PWP-4 | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO24 RoHS : Not Compliant | 9,144 | |||
| MAX77813EWP45+T | Analog Devices (Maxim Integrated) | 8,937 | ||||
| WP441W6A1-400-NFEI | Microchip Technology Inc | Telecom Circuit, 1-Func, PBGA1503 RoHS : Compliant | 8,212 | |||
| LM301AWP4 | Texas Instruments | Operational Amplifier, 1 Func, 10000uV Offset-Max, BIPolar, CDFP14 RoHS : Not Compliant | 7,131 | |||
| RC4136WP4 | Texas Instruments | Operational Amplifier, 4 Func, 7500uV Offset-Max, BIPolar, CDFP14 RoHS : Not Compliant | 5,228 | |||
| WP4S-1R8JA1 | Tt Electronics Plc | Fixed Resistor, Wire Wound, 4W, 1.8ohm, 100V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount | 831 | |||
| LWP4SG-V2AB-JKPL-1-F | OSRAM Opto Semiconductors | Single Color LED, White, Diffused, 1.6mm RoHS : Compliant | 796 | |||
| FWP-40A14FI | Cooper Industries | Electric Fuse, 40A, 700VAC, 700VDC, 200000A (IR), Inline/holder | 720 | |||
| LWP4SG-V2AB-JKPL-1 | OSRAM Opto Semiconductors | Single Color LED, White, Diffused, 1.6mm RoHS : Compliant | 698 | |||
| FWP-400A | Cooper Industries | Electric Fuse, 400A, 700VAC, 700VDC, 50000A (IR), Inline/holder RoHS : Compliant | 692 | |||
| WP424HDT | Kingbright Electronic | Single Color LED, Bright Red, Diffused Red, T-1, 3mm | 550 | |||
| WP4S-R68JA1 | Tt Electronics Plc | Fixed Resistor, Wire Wound, 4W, 0.68ohm, 100V, 5% +/-Tol, 350ppm/Cel, Through Hole Mount | 543 | |||
| LWP4SG-V2AB-JKPL-1-ZI | OSRAM Opto Semiconductors | Single Color LED, White, Diffused, 1.6mm RoHS : Compliant | 496 | |||
| WP4S-39RJA1 | Tt Electronics Plc | Fixed Resistor, Wire Wound, 4W, 39ohm, 100V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount | 347 | |||
 Waytek, Inc. | AWP-4P | Amphenol Sine Systems | ATP Wedgelock Receptacle 4 Way Deutsch WP-4P Compatible |
| 5,912 | |
| AWP-4S | Amphenol Sine Systems | ATP Wedgelock Plug 4 Way Deutsch WP-4S Compatible |
| 4,009 | ||
 Win Source Electronics | WP4A+ | Mini-Circuits | RF PWR DVDR 5.1GHZ-6.5GHZ 12VQFN RoHS : Compliant |
| 8,000 | |
| WP4C1+ | Mini-Circuits | RF PWR DVDR 800MZ-1.15GHZ 12VQFN RoHS : Compliant |
| 6,913 | ||
| WP4N+ | Mini-Circuits | RF PWR DVDR 1.215-1.9GHZ 12VQFN RoHS : Compliant |
| 5,050 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand