| Electronic Components Datasheet Search |
|
W134 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | W134MPCX-10 | Struthers-Dunn | Mercury Reed Relay With Clamping DIode - DPDT - 5V 45 Ohms Coil - 560mW - 2A Carry Current. RoHS : Compliant |
| 63 | |
| W134MPCX-2 | Struthers-Dunn | Reed Relays 12VDC 330Ohm 1A SPDT THT Mercury Wetted RoHS : Compliant |
| 39 | ||
| W134MPCX-7 | Struthers-Dunn | RoHS : Compliant |
| 8 | ||
| W134MPCX-10,5VDC | Struthers-Dunn | RoHS : Compliant |
| 5 | ||
| W134MIP-3 | Schneider Electric Relays | Reed Relay - 24 VDC. RoHS : Compliant |
| 5 | ||
| W134MPCX-11 | Struthers-Dunn | RoHS : Compliant |
| 1 | ||
| W134MPCX-3 | Struthers-Dunn | Mercury Wetted Reed Relay; No. of Poles: 1; Contacts: SPDT; Relay Mounting: PC Board; Carry Current: 2A; Leaded... RoHS : Compliant |
| 0 | ||
| W134MPCX-8 | Struthers-Dunn | RoHS : Compliant |
| 0 | ||
| W134MPCX-1 | Struthers-Dunn | Reed Relays 5VDC 60Ohm 1A SPDT THT Mercury Wetted RoHS : Compliant |
| 0 | ||
![]() Verical | W134MPCX-10 | Struthers-Dunn | W134MPCX-10 |
| 9 | |
| W134MPCX-7 | Struthers-Dunn | W134MPCX-7 |
| 7 | ||
![]() Avnet Americas | ATS-HP-D6L400S26W-134 | Advanced Thermal Solutions Inc | HIGH PERFORMANCE COPPER HEAT PIPE - ROUN - Trays (Alt: ATS-HP-D6L400S26W-134) RoHS : Compliant |
| 48 | |
| BSW-134-04-L-D | Samtec Inc | - Bulk (Alt: BSW-134-04-L-D) RoHS : Compliant |
| 0 | ||
| MTSW-134-07-L-D-225 | Samtec Inc | - Bulk (Alt: MTSW-134-07-L-D-225) RoHS : Compliant | 0 | |||
| MTSW-134-09-S-D-336-NA | Samtec Inc | - Bulk (Alt: MTSW-134-09-S-D-336-NA) RoHS : Compliant | 0 | |||
| MTSW-134-10-T-D-430 | Samtec Inc | - Bulk (Alt: MTSW-134-10-T-D-430) RoHS : Compliant | 0 | |||
| MTSW-134-13-G-Q-200 | Samtec Inc | - Bulk (Alt: MTSW-134-13-G-Q-200) RoHS : Compliant | 0 | |||
| MTSW-134-21-G-D-730 | Samtec Inc | - Bulk (Alt: MTSW-134-21-G-D-730) RoHS : Compliant | 0 | |||
| MTSW-134-21-L-D-100 | Samtec Inc | - Bulk (Alt: MTSW-134-21-L-D-100) RoHS : Compliant | 0 | |||
| MTSW-134-22-T-D-200 | Samtec Inc | - Bulk (Alt: MTSW-134-22-T-D-200) RoHS : Compliant | 0 | |||
| MTSW-134-27-T-Q-200 | Samtec Inc | - Bulk (Alt: MTSW-134-27-T-Q-200) RoHS : Compliant | 0 | |||
| MTSW-134-28-T-Q-430 | Samtec Inc | - Bulk (Alt: MTSW-134-28-T-Q-430) RoHS : Compliant | 0 | |||
| MTLW-134-05-G-S-110 | Samtec Inc | Pin Header, Board-to-Board, 1 Rows, 34 Contacts, Through Hole, MTLW Series, Unshrouded, Straight - Bulk (Alt: MTLW-134-05-G-S-110) RoHS : Compliant | 0 | |||
| MTLW-134-05-T-D-110 | Samtec Inc | - Bulk (Alt: MTLW-134-05-T-D-110) RoHS : Compliant | 0 | |||
| MTLW-134-08-G-D-000 | Samtec Inc | - Bulk (Alt: MTLW-134-08-G-D-000) RoHS : Compliant | 0 | |||
| MTLW-134-09-F-S-335 | Samtec Inc | - Bulk (Alt: MTLW-134-09-F-S-335) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | CR0603-JW-134ELF | Bourns Inc | Thick Film Resistors - SMD 130K 5% 1/10W RoHS : Compliant |
| 137,289 | |
| CR1206-JW-134ELF | Bourns Inc | Thick Film Resistors - SMD 130K 5% RoHS : Compliant |
| 42,985 | ||
| CR0805-JW-134ELF | Bourns Inc | Thick Film Resistors - SMD 130K 5% RoHS : Compliant |
| 374 | ||
| ATS-HP-D6L400S26W-134 | Advanced Thermal Solutions Inc | Liquid Cold Plates, Liquid Cooling & Heat Pipes Heat Pipe, Copper, High Performance, Round, Sintered, Distill H2O, 400x6mm Dia. RoHS : Compliant |
| 147 | ||
| SSW-134-22-S-D-RA | Samtec Inc | Headers & Wire Housings Tiger Buy Socket Strip with PCB Tails RoHS : Compliant |
| 52 | ||
| TSW-134-07-T-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips RoHS : Compliant |
| 44 | ||
| TSW-134-07-G-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips RoHS : Compliant |
| 35 | ||
| SSW-134-01-F-T | Samtec Inc | Headers & Wire Housings Tiger Buy Socket Strip with PCB Tails RoHS : Compliant |
| 25 | ||
| TSW-134-14-S-S | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips RoHS : Compliant |
| 15 | ||
| SSW-134-03-G-D-RA | Samtec Inc | Headers & Wire Housings Tiger Buy Socket Strip with PCB Tails RoHS : Compliant |
| 13 | ||
| SQW-134-01-F-D | Samtec Inc | Headers & Wire Housings Cost Effective Rugged PCB Sockets RoHS : Compliant |
| 8 | ||
| SSW-134-01-F-S | Samtec Inc | Headers & Wire Housings Tiger Buy Socket Strip with PCB Tails RoHS : Compliant |
| 5 | ||
| TSW-134-07-T-D-LL | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips RoHS : Compliant |
| 5 | ||
| SSW-134-22-F-D-VS | Samtec Inc | Headers & Wire Housings Tiger Buy Socket Strip with PCB Tails RoHS : Compliant |
| 2 | ||
| HTSW-134-07-G-S | Samtec Inc | Headers & Wire Housings High Temperature PCB Header Strips RoHS : Compliant |
| 1 | ||
![]() Newark | HTSW-134-07-G-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 68Way; |Samtec, Inc. HTSW-134-07-G-D RoHS : Compliant |
| 111 | |
| HMTSW-134-22-T-S-420 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 34Pos; |Samtec, Inc. HMTSW-134-22-T-S-420 RoHS : Compliant |
| 90 | ||
| MTSW-134-08-L-T-340 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 102Pos; |Samtec, Inc. MTSW-134-08-L-T-340 RoHS : Compliant |
| 82 | ||
| HMTSW-134-09-G-T-315 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 102Pos; |Samtec, Inc. HMTSW-134-09-G-T-315 RoHS : Compliant |
| 80 | ||
| MTSW-134-10-T-S-250-RA | Samtec Inc | Pin Header, Mtsw-134-10-T-S-250-Ra; |Samtec, Inc. MTSW-134-10-T-S-250-RA RoHS : Compliant |
| 75 | ||
| MTSW-134-09-S-D-430-RA-009 | Samtec Inc | Pin Header, Mtsw-134-09-S-D-430-Ra-009; |Samtec, Inc. MTSW-134-09-S-D-430-RA-009 RoHS : Compliant |
| 45 | ||
| MTSW-134-09-S-D-430-RA-005 | Samtec Inc | Pin Header, Mtsw-134-09-S-D-430-Ra-005; |Samtec, Inc. MTSW-134-09-S-D-430-RA-005 RoHS : Compliant |
| 45 | ||
| ESW-134-34-T-D | Samtec Inc | Connector, Rcpt, 68Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-134-34-T-D RoHS : Compliant |
| 39 | ||
| ESW-134-69-S-D | Samtec Inc | Connector, Rcpt, 68Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-134-69-S-D RoHS : Compliant |
| 38 | ||
| ESW-134-12-T-S | Samtec Inc | Connector, Rcpt, 34Pos, 1Row, 2.54Mm; |Samtec, Inc. ESW-134-12-T-S RoHS : Compliant |
| 26 | ||
| ESW-134-23-G-S | Samtec Inc | Connector, Rcpt, 34Pos, 1Row, 2.54Mm; |Samtec, Inc. ESW-134-23-G-S RoHS : Compliant |
| 24 | ||
| ESW-134-12-S-S-LL | Samtec Inc | Connector, Rcpt, 34Pos, 1Row, 2.54Mm; |Samtec, Inc. ESW-134-12-S-S-LL RoHS : Compliant |
| 24 | ||
| ESW-134-14-T-D | Samtec Inc | Connector, Rcpt, 68Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-134-14-T-D RoHS : Compliant |
| 23 | ||
| ESW-134-44-G-S | Samtec Inc | Connector, Rcpt, 34Pos, 1Row, 2.54Mm; |Samtec, Inc. ESW-134-44-G-S RoHS : Compliant |
| 23 | ||
| ESW-134-34-G-S | Samtec Inc | Connector, Rcpt, 34Pos, 1Row, 2.54Mm; |Samtec, Inc. ESW-134-34-G-S RoHS : Compliant |
| 22 | ||
![]() RS | W134267 | Gems Sensors & Controls | LEVEL TRANSMITTER, XT800-3-BR-BN-2-32-01800, J-H- |
| 0 | |
| 6013W134 | AMETEK Factory Automation | WIRE SUSPENDED ELECTRODE TITANIUM L=4 FEET |
| 0 | ||
| 9002AW134 | Square D by Schneider Electric | FOOT SWITCH, HARMONY 9002AW, OVERSIZED PEDAL AND SIDE SHIELDS, SPDT CONTACT |
| 0 | ||
| PVL12FW134 | E-Switch Inc | PILOT INDICATOR, NO INTERNAL SWITCH CONTACTS, 150MM WIRE LEADS, IP67, PVL SERIES |
| 0 | ||
| PVL10FW134 | E-Switch Inc | SWITCH |
| 0 | ||
| SE91FA19W-1-34 | SOURIAU-SUNBANK | ACCESSORIES FOR CONNECTORS & CONDUITS |
| 0 | ||
| SNW 134X5.15/16 | SKF | ADAPTER SLEEVES, INCH DIMENSIONS |
| 0 | ||
| AKL.W1-3/4-HLG (W134) | INA Bearings | DEEP GROOVE BALL BEARING, 44.58MM ID, 68.269MM OD, 19.05MM W |
| 0 | ||
| 11-31-6452 (AM8475W134) | Molex | AM8475W134 CABLE DRIVE RO |
| 0 | ||
| 0270-07200 (SSW134 10/1 B WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 10:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
| 0270-07212 (SSW134 10/1 C WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 10:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
| 0270-07201 (SSW134 15/1 B WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 15:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
| 0270-07217 (SSW134 40/1 C WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 40:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
| 0270-07205 (SSW134 40/1 B WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 40:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
| 0270-07206 (SSW134 50/1 B WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 50:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
![]() Bisco Industries | SSW-134-02-S-D-RA | Samtec Inc | RoHS : Compliant | 3 | ||
![]() Sager | MTSW-134-08-G-D-265 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 192 | |
| BSW-134-04-L-D | Samtec Inc | Board to Board & Mezzanine Connectors .100 Bottom Entry Socket Strip RoHS : Compliant |
| 0 | ||
| BSW-134-24-S-S-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-07-F-S-185 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-07-L-D-225 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-08-F-D-275 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-09-S-D-336-NA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-10-T-D-430 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-13-G-Q-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-21-G-D-730 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-21-L-D-100 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-22-T-D-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-27-T-Q-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-28-G-D-940 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-134-28-T-Q-430 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TME | BSW-134-24-S-D-S | Samtec Inc | Connector: PCB to PCB; Plating: gold-plated; straight; BSW; 2.54mm RoHS : Compliant |
| 96 | |
| NW134-49VDE-160 | NWS | Pliers: insulated; side,cutting; 160mm; Cut: with side face |
| 29 | ||
| SQW-134-01-F-D-VS-LC | Samtec Inc | Connector: pin strips; female; PIN: 68; straight; soldering,THT RoHS : Compliant |
| 13 | ||
| TV07RW13-4SD | Amphenol Aerospace | Connector: military; socket; female; PIN: 4; Series III TV; crimped |
| 0 | ||
| TVP00RW13-4P | Amphenol Corporation | Connector: military; socket; male; PIN: 4; Series III TV; crimped |
| 0 | ||
| TVP00RW13-4PALC | Amphenol Corporation | Connector: military; socket; male; PIN: 4; Series III TV; crimped RoHS : Not Compliant |
| 0 | ||
| D6L400S26W-134 | Advanced Thermal Solutions Inc | Heatsink: heat pipe; round; natural; L: 400mm; copper; raw; Ø: 6mm |
| 0 | ||
| TVP00RW13-4PCLC | Amphenol Corporation | Connector: military; socket; male; PIN: 4; Series III TV; crimped |
| 0 | ||
| TV07RW13-4P | Amphenol Aerospace | Connector: military; socket; male; PIN: 4; Series III TV; crimped |
| 0 | ||
| TVP00RW13-4S | Amphenol Corporation | Connector: military; socket; female; PIN: 4; Series III TV; crimped RoHS : Not Compliant |
| 0 | ||
| TV06RW13-4PBLC | Amphenol Aerospace | Connector: military; plug; male; PIN: 4; Series III TV; straight |
| 0 | ||
| TV07RW13-4PCLC | Amphenol Aerospace | Connector: military; socket; male; PIN: 4; Series III TV; crimped |
| 0 | ||
| TV06RW13-4SBLC | Amphenol Aerospace | Connector: military; plug; female; PIN: 4; Series III TV; straight |
| 0 | ||
| TV07RW13-4SCLC | Amphenol Aerospace | Connector: military; socket; female; PIN: 4; Series III TV; crimped |
| 0 | ||
| TV07RW13-4SLC | Amphenol Aerospace | Connector: military; socket; female; PIN: 4; Series III TV; crimped |
| 0 | ||
![]() Interstate Connecting Components | TV01RW-13-4S | Amphenol Aerospace | 38999 INLINE RCP 4#16 SKT CAD |
| 106 | |
| YW324TW13-41SB0000 | TE Connectivity | JAM NUT RECEPT ASSY.WILDCAT. | 0 | |||
| W326TW13-41PN | TE Connectivity |
| 0 | |||
| YW326TW13-41PB0000 | TE Connectivity | PLUG ASSY. | 0 | |||
| TVP40RW-13-4P(P15AD) | Amphenol Aerospace | S3 PAN MT RECPT PCB WALL MT DBL FLNG 4#16 PIN .150 DISK | 0 | |||
| TV06RW-13-4SA L/C | Amphenol Aerospace | RFI PLUG 38999 SIII |
| 0 | ||
| TV06RW-13-4S L/C | Amphenol Aerospace | RFI PLUG 38999 SIII |
| 0 | ||
| 233-105-00ZW13-4PN | Glenair Inc | ENVIRO WALL MOUNT RECEPTACLE CONNECTOR | 0 | |||
| W324TW13-41SN-151 | TE Connectivity | HD38999 J/N 41C SKT PCB | 0 | |||
| TV06RW-13-4P L/C | Amphenol Aerospace | RFI PLUG 38999 SIII |
| 0 | ||
| 319FW134XW15 | Glenair Inc | 0 | ||||
| TV06RW-13-4PB L/C | Amphenol Aerospace | RFI PLUG 38999 SIII |
| 0 | ||
| TV47RW-13-4P(P15) | Amphenol Aerospace | 88-721233-04P1 | 0 | |||
| TVP80RW-13-4S | Amphenol Aerospace | 38999 S3 LINE MNT RCP 4#16 SKT CAD | 0 | |||
| TV06RW-13-4S(LC) | Amphenol Aerospace | RFI PLUG, 38999 SIII | 0 | |||
![]() PEI Genesis | TVP00RW-13-4PB-LC | Amphenol Corporation | RoHS : Not Compliant |
| 34 | |
| CTV06RW-13-4B | Amphenol Corporation |
| 21 | |||
| CTV06RW-13-4JN-LC | Amphenol Corporation |
| 21 | |||
| TVP00RW-13-4JB | Amphenol Corporation |
| 0 | |||
| J1620S20W1-34 | SOURIAU-SUNBANK |
| 0 | |||
| CTV06RW-13-4PB | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| SE90A31W-1-34-077B1469 | SOURIAU-SUNBANK |
| 0 | |||
| SE91F05W-1-34 | SOURIAU-SUNBANK |
| 0 | |||
| J1620P20W1-34 | SOURIAU-SUNBANK |
| 0 | |||
| TV06RW-13-4SC | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| TV07RW-13-4PA | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| CTVP00RW-13-4S | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| TV01RW-13-4S | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| TV06RW-13-4JN | Amphenol Corporation |
| 0 | |||
| CTVP00RW-13-4HN-LC | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | TSW-134-14-T-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 283 | |
| TSW-134-26-G-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 160 | ||
| MTSW-134-08-G-D-265 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 127 | ||
| MTSW-134-06-T-S-060 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 127 | ||
| MTSW-134-09-T-S-540 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 127 | ||
| SQW-134-01-L-D-VS-K | Samtec Inc | Cost Effective Rugged PCB Sockets, 2.00m RoHS : Compliant |
| 68 | ||
| HMTSW-134-07-S-S-225 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 59 | ||
| MTSW-134-08-L-T-340 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 54 | ||
| MTSW-134-09-S-D-430-RA-009 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 30 | ||
| ESW-134-23-S-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 27 | ||
| ESW-134-33-G-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 26 | ||
| ESW-134-37-S-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 21 | ||
| ESW-134-39-G-S | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 17 | ||
| TV07RW-13-4PA | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 16 | ||
| TVP00RW-13-4HN | Amphenol Corporation | TV 4C 4#16 PIN RECP |
| 1 | ||
![]() Richardson RFPD | ATS-HP-D6L400S26W-134 | Advanced Thermal Solutions Inc | Thrml Mgmt Access Round Heat Pipe Copper Alloy RoHS : Compliant |
| 0 | |
![]() Avnet Abacus | SQW-134-01-L-D-VS | Samtec Inc | PCB Receptacle BoardtoBoard WiretoBoard 2 mm 2 Rows 68 Contacts Surface Mount (Alt: SQW-134-01-L-D-VS) RoHS : Compliant | 22 | ||
| SQW-134-01-F-D | Samtec Inc | (Alt: SQW-134-01-F-D) RoHS : Compliant | 0 | |||
| SQW-134-01-L-T | Samtec Inc | (Alt: SQW-134-01-L-T) RoHS : Compliant | 0 | |||
| SSW-134-02-G-D | Samtec Inc | PCB Receptacle BoardtoBoard 254 mm 2 Rows 68 Contacts Solder SSW Series Phosphor Bronze (Alt: SSW-134-02-G-D) RoHS : Compliant | 0 | |||
| TSW-134-14-S-S | Samtec Inc | (Alt: TSW-134-14-S-S) RoHS : Compliant | 0 | |||
| TSW-134-15-G-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 68 Contacts Through Hole TSW Series (Alt: TSW-134-15-G-D) RoHS : Compliant | 0 | |||
| SSW-134-02-F-D | Samtec Inc | Conn Socket Strip SKT 68 POS 254mm Solder ST ThruHole (Alt: SSW-134-02-F-D) RoHS : Compliant | 0 | |||
| TSW-134-14-G-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 68 Contacts Through Hole TSW Series (Alt: TSW-134-14-G-D) RoHS : Compliant | 0 | |||
| DPXAMA-40W1-34P | ITT Interconnect Solutions | Conn Rack and Panel ARINC 404 PIN 1Coaxial39Signal POS Crimp ST Panel Mount (Alt: 021000-2216) RoHS : Not Compliant | 0 | |||
| CR1206-JW-134ELF | Bourns Inc | - Tape and Reel (Alt: CR1206-JW-134ELF) RoHS : Compliant | 0 | |||
| CR0402-JW-134GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-JW-134GLF) RoHS : Compliant | 0 | |||
| CR0603-JW-134ELF | Bourns Inc | - Tape and Reel (Alt: CR0603-JW-134ELF) RoHS : Compliant | 0 | |||
| CR0805-JW-134ELF | Bourns Inc | - Tape and Reel (Alt: CR0805-JW-134ELF) RoHS : Compliant | 0 | |||
| MTSW-134-07-T-S-140 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 34 Contacts Through Hole MTSW Series (Alt: MTSW-134-07-T-S-140) RoHS : Compliant | 0 | |||
| MTLW-134-09-G-S-335 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 34 Contacts Through Hole MTLW Series (Alt: MTLW-134-09-G-S-335) RoHS : Compliant | 0 | |||
![]() Avnet Silica | CBT3244APW,134![]() | Nexperia | Bus Switch 8 Channel 15 Ohm 128 mA 20 Pins TSSOP (Alt: CBT3244APW,134) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | MTSW-134-07-T-T-100-RA | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 1,020 | ||
![]() FDH Electronics | SE91FA15W-1-34 | SOURIAU-SUNBANK | Backshells & Ac |
| 4 | |
| SE91FA31W-1-34 | SOURIAU-SUNBANK | Connector Acc |
| 3 | ||
| J1620-52W1-34 | SOURIAU-SUNBANK | Backshells & Ac | 2 | |||
| SE91FA09W-1-34 | SOURIAU-SUNBANK | Connector Acc |
| 2 | ||
| SE91FA19W-1-34 | SOURIAU-SUNBANK | Connector Acc | 0 | |||
| SE91FA11W-1-34 | SOURIAU-SUNBANK | Connector Acc | 0 | |||
| SE91F06W-1-34 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
![]() Master Electronics | CR1206-JW-134ELF | Bourns Inc | Thick Film Chip Resistor - 1/4 W - 130 Kohm ±5% - ±200ppm/°C - SMD 1206 - RoHS Compliant - Tape&Reel RoHS : Compliant |
| 0 | |
| BSW-134-04-L-D | Samtec Inc | .100 Bottom Entry Socket Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-07-F-S-185 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-07-L-D-225 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-08-F-D-275 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-08-G-D-265 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-08-L-S-270 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-134-09-S-D-336-NA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-09-T-Q-330-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-134-10-G-D-000 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-134-10-T-D-430 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-11-G-S-000 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-134-12-S-Q-100-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-134-13-G-Q-200 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-134-21-G-D-730 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W13456/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly TNC male to TNC male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W13456/HS-24 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13456/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our TNC male to right angle TNC male cable has a maximum VSWR of 1.15:1. TNC plug to TNC plug cable assembly PE3W13456/HS-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13456/HS-24 can also be used in the other direction and will be a right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 4,062 | |
| PE3W13414/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated TNC Male Right Angle to Water Blue FAKRA Jack Low Loss Cable Using LMR-100-FR Coax with HeatShrink in 12 Inch., Radio frequency assembly fire rated TNC male right angle to water blue FAKRA jack low loss cable using LMR-100-FR coax with heatshrink in 12 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated TNC male right angle to water blue FAKRA jack low loss cable using LMR-100-FR coax with heatshrink in 12 inch, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and FAKRA cable connection on the other. Our right angle TNC to FAKRA cable assemblies have a male gender on end 1 and jack on end 2. This TNC to FAKRA cable is a male to jack coax assembly, PE3W13414/HS-12, can also be known as a right angle TNC plug to FAKRA female cable assembly and will be shipped same-day as it is purchased. TNC plug to FAKRA female cable assembly PE3W13414/HS-12 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC right angle male to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13414/HS-12 can also be used in the other direction and will be FAKRA jack to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to FAKRA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated TNC male right angle to water blue FAKRA jack low loss cable using LMR-100-FR coax with heatshrink in 12 inch. |
| 1,074 | ||
| PE3W13450/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. Fire Rated SMA Male to SMA Male Low Loss Cable Using LMR-100-FR Coax with HeatShrink., Radio frequency assembly fire rated SMA male to SMA male low loss cable using LMR-100-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated SMA male to SMA male low loss cable using LMR-100-FR coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W13450/HS can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W13450/HS is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated SMA male to SMA male low loss cable using LMR-100-FR coax with heatshrink. | 0 | |||
| PE3W13461LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to 10-32 Female Cable Using RG174 Coax, LF Solder. PE3W13461LF is a SMA male to 10-32 female cable using RG174 coax. This Pasternack SMA male to 10-32 female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 10-32 for connector 2. Our male SMA to female 10-32 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13461LF SMA male to 10-32 female cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W13465 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMB Plug Right Angle Low Loss Cable Using LMR-100 Coax., Radio frequency assembly TNC male right angle to SMB plug right angle low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMB plug right angle low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle SMB cable connection on the other. Our low loss right angle TNC to right angle SMB cable assembly has a male gender on end 1 and a plug on end 2. PE3W13465 can also be known as a low loss right angle TNC plug to right angle SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13465 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle SMB plug cable has a maximum VSWR of 1.4:1. TNC plug to SMB male cable assembly PE3W13465 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13465 can also be used in the other direction and will be a right angle SMB plug to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W13465-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male Right Angle to SMB Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly TNC male right angle to SMB plug right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMB plug right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle SMB cable connection on the other. Our low loss right angle TNC to right angle SMB cable assembly has a male gender on end 1 and a plug on end 2. PE3W13465-100CM can also be known as a low loss right angle TNC plug to right angle SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13465-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle SMB plug cable has a maximum VSWR of 1.4:1. TNC plug to SMB male cable assembly PE3W13465-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13465-100CM can also be used in the other direction and will be a right angle SMB plug to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W13490LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.2-5 Male to QMA Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax with Times Microwave Components, LF Solder., Radio frequency assembly 2.2-5 male to QMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to QMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a QMA cable connection on the other. Our low PIM 2.2-5 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W13490LF-36 can also be known as a low PIM 2.2-5 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W13490LF-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 male to QMA male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to QMA plug cable assembly PE3W13490LF-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W13490LF-36 can also be used in the other direction and will be a QMA male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to QMA cable assembly for quick shipment worldwide. Variations of 2.2-5 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W13403LF-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. 7/16 DIN Male to HN Female Cable 72 Inch Length Using RG214 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to HN female cable 72 inch length using RG214 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN female cable 72 inch length using RG214 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a female on end 2. PE3W13403LF-72 can also be known as a 7/16 DIN plug to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13403LF-72 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN female cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN jack cable assembly PE3W13403LF-72 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13403LF-72 can also be used in the other direction and will be a HN female to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W13432LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Jack to MMCX Plug Right Angle Cable Using PE-SR405FLJ Coax, LF Solder. PE3W13432LF is a MMCX jack to MMCX plug right angle cable using PE-SR405FLJ coax. This Pasternack MMCX jack to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack MMCX to plug MMCX right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13432LF MMCX jack to MMCX plug right angle cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W13471/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W13471/HS-200CM can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13471/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W13471/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W13433/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-LW240 Coax with HeatShrink. PE3W13433/HS is a SMA male to SMA male cable using LMR-LW240 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13433/HS SMA male to SMA male cable assembly is constructed with LMR-LW240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13475 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. UHF Male to BNC Male Cable Using LMR-195-UF Coax. PE3W13475 is a UHF male to BNC male cable using LMR-195-UF coax. This Pasternack UHF male to BNC male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. Our male UHF to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13475 UHF male to BNC male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13422 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. QMA Male to TNC Female Bulkhead Cable Using LMR-195 Coax. PE3W13422 is a QMA male to TNC female bulkhead cable using LMR-195 coax. This Pasternack QMA male to TNC female bulkhead cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm TNC for connector 2. Our male QMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13422 QMA male to TNC female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13459 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-LW240 Coax. PE3W13459 is a N male to N male cable using LMR-LW240 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13459 N male to N male cable assembly is constructed with LMR-LW240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13491LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. N Male to 4.1/9.5 Mini DIN Male Cable Using 1/4 inch Superflexible Coax, LF Solder. PE3W13491LF is a N male to 4.1/9.5 Mini DIN male cable using 1/4" Superflexible coax. This Pasternack N male to 4.1/9.5 Mini DIN male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 4.1/9.5 Mini DIN for connector 2. Our male N to male 4.1/9.5 Mini DIN cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W13491LF N male to 4.1/9.5 Mini DIN male cable assembly is constructed with 1/4" Superflexible coax. | 0 | |||
![]() Venkel Ltd. | CR0402-16W-134JT | VENKEL LTD | Chip Resistor;0402;1/16W;130K;�5% RoHS : Compliant | 20,000 | ||
| CR0603-16W-134JT | VENKEL LTD | Chip Resistor;0603;1/16W;130K;�5% RoHS : Compliant | 10,000 | |||
| HPCR1210-W-134JT | VENKEL LTD | High Power CR;1210;3/4W;130K;�5% RoHS : Compliant | 0 | |||
| CR1206-4W-134JT | VENKEL LTD | Chip Resistor;1206;1/4W;130K;�5% RoHS : Compliant | 0 | |||
| CR2512-1W-134JT | VENKEL LTD | Chip Resistor;2512;1W;130K;�5% RoHS : Compliant | 0 | |||
| CR2010-2W-134JT | VENKEL LTD | Chip Resistor;2010;1/2W;130K;�5% RoHS : Compliant | 0 | |||
| HVCR0402-16W-134JT | VENKEL LTD | High Voltage CR;0402;1/16W;130K;�5% RoHS : Compliant | 0 | |||
| CRS0402-16W-134JT | VENKEL LTD | Anti-Sulfuration CR;0402;1/16W;130K;�5% RoHS : Compliant | 0 | |||
| CRS1210-2W-134JT | VENKEL LTD | Anti-Sulfuration CR;1210;1/2W;130K;�5% RoHS : Compliant | 0 | |||
| CR1206-8W-134JT | VENKEL LTD | Chip Resistor;1206;1/8W;130K;�5% RoHS : Compliant | 0 | |||
| CR0201-20W-134JT | VENKEL LTD | Chip Resistor;0201;1/20W;130K;�5% RoHS : Compliant | 0 | |||
| CR0402-10W-134JT | VENKEL LTD | Chip Resistor;0402;1/10W;130K;�5% RoHS : Compliant | 0 | |||
| CR01005-32W-134JT | VENKEL LTD | Chip Resistor;01005;1/32W;130K;�5% RoHS : Compliant | 0 | |||
| CR1210-4W-134JT | VENKEL LTD | Chip Resistor;1210;1/4W;130K;�5% RoHS : Compliant | 0 | |||
| CRS0603-10W-134JT | VENKEL LTD | Anti-Sulfuration CR;0603;1/10W;130K;�5% RoHS : Compliant | 0 | |||
![]() Vyrian | CTV06RW-13-4P | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Male, Crimp Terminal, Plug RoHS : Not Compliant | 17,553 | ||
| TV07RW-13-4S | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle RoHS : Not Compliant | 15,449 | |||
| TV07RW-13-4P | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 13,496 | |||
CBT3244APW,134![]() | Nexperia | Bus Driver, 3244 Series, 2-Func, 4-Bit, True Output, PDSO20 RoHS : Compliant | 9,317 | |||
| 2MG8-CW13-4S | Broadcom Limited | 8,359 | ||||
| TV07RW-13-4PDLC | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 865 | |||
| TV07RW-13-4PBLC | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 817 | |||
| TV07RW-13-4PE | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 736 | |||
| TV07RW-13-4PC | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 711 | |||
| TV07RW-13-4PB | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 399 | |||
| TV07RW-13-4PCLC | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 340 | |||
| TV07RW-13-4PD | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 242 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |