 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
MP25 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | EKMH201VSN271MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 270uF 200V 20% (22 X 25mm) Snap-In 10mm 0.614 Ohm 870mA 2000h 105°C RoHS : Compliant |
| 600 | |
| EKMS3B1VSN181MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 180uF 315V 20% (22 X 25mm) Snap-In 10mm 950mA 3000h 105A°C RoHS : Compliant |
| 200 | ||
| CMP2512-JW-221ELF | Bourns Inc | Res Thick Film 2512 220 Ohm 5% 1.5W ±200ppm/C Pad SMD T/R RoHS : Compliant |
| 0 | ||
| EKMM3B1VSN121MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKMM630VSN102MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKMQ500VSN272MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKMT421VSN101MP25S | United Chemi-Con Inc | Series: Kmt; Volt: 420; Cap: 100; Dia X Length: 22X25; Packaging: Snap-in RoHS : Compliant |
| 0 | ||
| ELXS3B1VSN181MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 180uF 315V 20% (22 X 25mm) Snap-In 10mm 950mA 5000h 105A°C Automotive RoHS : Compliant |
| 0 | ||
| CMP2512AJW-220ELF | Bourns Inc | RoHS : Compliant |
| 0 | ||
| EKMW401VSN151MP25S | United Chemi-Con Inc | Series: Kmw; Volt: 400; Cap: 150; Dia X Length: 22X25; Packaging: Snap-in RoHS : Compliant |
| 0 | ||
| ELHS451VSN101MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| CMP2512AFX-1601ELF | Bourns Inc | ResHighPowerA 2512 1.6k 1% 1.5W TC100 TR07 Tape & Reel - 7 reel | Bourns CMP2512AFX-1601ELF RoHS : Compliant |
| 0 | ||
| CMP2512AFX-22R0ELF | Bourns Inc | ResHighPowerA 2512 22R 1% 1.5W TC100 TR07 Tape & Reel - 7 reel | Bourns CMP2512AFX-22R0ELF RoHS : Compliant |
| 0 | ||
| IMP-250-22 | Orion Fans | Aluminum Impeller for Open Frame Motors RoHS : Compliant |
| 0 | ||
| ESMQ401VSN121MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
 Verical | MP-254254-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x25.4mm RoHS : Compliant |
| 35,000 | |
| MP-254254-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x25.4mm RoHS : Compliant |
| 30,000 | ||
| MP-2501A | Same Sky | 2.5 mm, Mono, Round Cover, Audio Plug Connector RoHS : Exempt |
| 3,900 | ||
| MP-2511 | Same Sky | 2.5 mm, Mono, Overmold, Audio Plug Connector RoHS : Exempt |
| 3,000 | ||
| MP250-M | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 3,000 | ||
| MP250-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 2,500 | ||
| MP-2522-01 | Same Sky | 2.5 mm, Mono, Overmold, Audio Plug Connector RoHS : Exempt |
| 2,000 | ||
| MP250-C0 | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 Black RoHS : Compliant |
| 1,000 | ||
| MP250 | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) Series 3rd Overtone 55Ohm 2-Pin HC-49/US Thru-Hole Bulk RoHS : Compliant |
| 680 | ||
| MP254 | Rectron Semiconductor | Diode Rectifier Bridge Single 400V 25A 4-Pin MP-25 RoHS : Exempt |
| 540 | ||
| MP256 | Rectron Semiconductor | Diode Rectifier Bridge Single 600V 25A 4-Pin MP-25 RoHS : Compliant |
| 470 | ||
| MP258W | Rectron Semiconductor | Diode Rectifier Bridge Single 800V 25A 4-Pin Case MP-25W RoHS : Compliant |
| 250 | ||
| MP250W175-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 100 | ||
| MP250-C0 | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 Black RoHS : Compliant |
| 91 | ||
| MP250-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 10 | ||
 Avnet Americas | RCLAMP2504N.TCT | Semtech Corporation | - Tape and Reel (Alt: RCLAMP2504N.TCT) RoHS : Not Compliant |
| 15,000 | |
| HLMP-2550 | Broadcom Limited | LED Bar Graph Array, Green, 20 mA, 2.2 V, 50 mcd, 4 LEDs, 19.05mm x 3.81mm - Rail/Tube (Alt: HLMP-2550) RoHS : Compliant |
| 675 | ||
RCLAMP2502L.TBT | Semtech Corporation | ESD Protection Device, 20 V, SOIC, 8 Pins, 2.5 V, 10 pF - Tape and Reel (Alt: RCLAMP2502L.TBT) RoHS : Not Compliant |
| 500 | ||
| MP250 | CTS Corporation | - Bulk (Alt: MP250) RoHS : Compliant |
| 200 | ||
| STM32MP257CAI3 | STMicroelectronics | Microprocessor, 4Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, TFBGA, 436 Pins - Bulk (Alt: STM32MP257CAI3) RoHS : Not Compliant |
| 150 | ||
| STM32MP257DAL3 | STMicroelectronics | Microprocessor, 2 Cores, 32-bit / 64-bit, STM32, 1.5 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP257DAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP253CAL3 | STMicroelectronics | Microprocessor, 4Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP253CAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255DAL3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP255DAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP251AAK3 | STMicroelectronics | Microprocessor, 3Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, VFBGA, 424 Pins - Bulk (Alt: STM32MP251AAK3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255FAK3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA, 424 Pins - Trays (Alt: STM32MP255FAK3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255DAK3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA - Trays (Alt: STM32MP255DAK3) RoHS : Not Compliant |
| 146 | ||
| STM32MP253CAI3 | STMicroelectronics | Microprocessor, 4Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.2 GHz, TFBGA, 436 Pins - Bulk (Alt: STM32MP253CAI3) RoHS : Not Compliant |
| 135 | ||
| DBMP-25SJ-A197 | ITT Interconnect Solutions | - Bulk (Alt: DBMP-25SJ-A197) RoHS : Compliant | 22 | |||
| STM32MP257FAL3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA, 361 Pins - Trays (Alt: STM32MP257FAL3) RoHS : Not Compliant |
| 20 | ||
| STM32MP257F-EV1 | STMicroelectronics | Evaluation Board, STM32MP257FAI3, STM32 Family, ARM Cortex-A35/M33/M0+, 32bit/64bit, Dual Core - Boxed Product (Development Kits) (Alt: STM32MP257F-EV1) RoHS : Not Compliant | 11 | |||
 Arrow Electronics | MP-254254-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x25.4mm RoHS : Compliant |
| 30,000 | |
| MP258W | Rectron Semiconductor | Diode Rectifier Bridge Single 800V 25A 4-Pin Case MP-25W RoHS : Compliant |
| 250 | ||
| MP250-C0 | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 Black RoHS : Compliant |
| 100 | ||
| MP250-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 10 | ||
 Newark | CMP2512-JW-221ELF | Bourns Inc | Chip Res Smd, 220R, ±5%, 1.5W; |Bourns, Inc. CMP2512-JW-221ELF RoHS : Compliant |
| 2,017 | |
| CMP2512-JW-221ELF | Bourns Inc | Chip Res Smd, 220R, ±5%, 1.5W; |Bourns, Inc. CMP2512-JW-221ELF RoHS : Compliant |
| 2,017 | ||
| CMP2512-JW-221ELF | Bourns Inc | Res, 220R, 5%, 1.5W, 2512, Thick Film; |Bourns, Inc. CMP2512-JW-221ELF RoHS : Compliant |
| 1,555 | ||
| CMP2512-JW-221ELF | Bourns Inc | Res, 220R, 5%, 1.5W, 2512, Thick Film; |Bourns, Inc. CMP2512-JW-221ELF RoHS : Compliant |
| 1,555 | ||
| SMP255FA5270MB31TR24 | KEMET Corporation | Suppression Cap, 0.027Uf, Class X2, 310V; |Kemet SMP255FA5270MB31TR24 RoHS : Compliant |
| 600 | ||
| SMP255FA5270MB31TR24 | KEMET Corporation | Suppression Cap, 0.027Uf, Class X2, 310V; |Kemet SMP255FA5270MB31TR24 RoHS : Compliant |
| 600 | ||
| SMP253EA4220MB31TR24 | KEMET Corporation | Suppression Cap, 2200Pf, Class Y2, 300V; |Kemet SMP253EA4220MB31TR24 RoHS : Compliant |
| 539 | ||
| SMP253EA4220MB31TR24 | KEMET Corporation | Suppression Cap, 2200Pf, Class Y2, 300V; |Kemet SMP253EA4220MB31TR24 RoHS : Compliant |
| 539 | ||
| SMP255FC5820MD32TR32 | KEMET Corporation | Suppression Cap, 0.082Uf, Class X2, 310V; |Kemet SMP255FC5820MD32TR32 RoHS : Compliant |
| 270 | ||
| SMP255FC5820MD32TR32 | KEMET Corporation | Suppression Cap, 0.082Uf, Class X2, 310V; |Kemet SMP255FC5820MD32TR32 RoHS : Compliant |
| 270 | ||
| SMP255FC5820MD32TR32 | KEMET Corporation | Suppression Cap, 0.082Uf, Class X2, 310V; |Kemet SMP255FC5820MD32TR32 RoHS : Compliant |
| 270 | ||
| SMP255FC5820MD32TR32 | KEMET Corporation | Suppression Cap, 0.082Uf, Class X2, 310V; |Kemet SMP255FC5820MD32TR32 RoHS : Compliant |
| 270 | ||
| SMP253FC5470MD32TV32 | KEMET Corporation | Capacitor, 0.047Uf, Class Y2, 310Vac/Smd; |Kemet SMP253FC5470MD32TV32 RoHS : Not Compliant |
| 200 | ||
| SMP253FC5470MD32TV32 | KEMET Corporation | Capacitor, 0.047Uf, Class Y2, 310Vac/Smd; |Kemet SMP253FC5470MD32TV32 RoHS : Not Compliant |
| 200 | ||
| IMP-250-22 | Orion Fans | Metal Impeller, 250Mm X 22Deg, Of Motor; Pitch Angle:22°; For Use With:Oam Open Frame Motor; Blade Gauge:0.8 ± 0.03; Airflow Direction:Intake (Toward Motor); Impeller Connection:Screw; Impeller Material:Aluminium Rohs Compliant: Yes |Orion Fans IMP-250-22 RoHS : Compliant |
| 44 | ||
 RS | MP250-M | Panduit Corp | HARNESS IDENTIFICATION MARKER PLATE, 2.50" X 0.75"(63.5MM X 19.1MM), WHITE |
| 900 | |
| MP25-2 | Custom Connector Corporation | ACCESSORY, RELAY SOCKET, HOLD DOWN SPRING, PLASTIC, FOR 25MM HIGH RELAYS |
| 100 | ||
| MP250W175-C | Panduit Corp | PRINTER TAPE, CARTRIDGE / CASSETTE, WHITE, NYLON 6.6, LENGTH 63.5MM RoHS : Compliant |
| 96 | ||
| MP250-C | Panduit Corp | MARKER PLATE, 2.50" X 0.75"(63.5MM X 19. |
| 95 | ||
| 62MP2500 | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN HOLE, .250 MAX PANEL |
| 78 | ||
| IMP-250-22 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 22 DEGREE PITCH ANGLE |
| 20 | ||
| IMP-250-34 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 34 DEGREE PITCH ANGLE |
| 20 | ||
| IMP-250-28 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 28 DEGREE PITCH ANGLE |
| 20 | ||
| CMP250PS24 | XP Power | POWER SUPPLY AC-DC 24V@10.4A 5V@1.5A 12V@0.6A 80-264V IN OPEN FRAME MEDICAL 250W RoHS : Compliant |
| 8 | ||
| MP25TA00 | Red Lion Controls | SENSOR, PERMANENT, NPN, 2-LEAD WIRE, VINYL, -40 TO +107 DEG.C |
| 5 | ||
| CMP250PS48 | XP Power | POWER SUPPLY AC-DC 48V@5.2A 5V@1.5A 12V@0.6A 80-264V IN OPEN FRAME MEDICAL 250W RoHS : Compliant |
| 3 | ||
| JUMP250 | Mersen Electrical Power | JUMBER BAR FOR MERSEN 250A DC DISCONMNECT SWITCH |
| 2 | ||
| 50LMP-25WH | Edwards Signaling | LAMP, HALOGEN,25W,105 SERIES REPLACEMENT, BEACON, TRADE NUMBER 25T8DC |
| 1 | ||
| LW6MP-25MA | IDEC Corporation | PANEL MOUNT INDICATOR 25MM PILOT LIGHT AMBER |
| 1 | ||
| MP2.5X1/4X4X1FF-DR | Fabco-Air | PANCAKE CYLINDER |
| 1 | ||
 STMicroelectronics | STM32MP257FAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 1,607 | |
| STM32MP257FAK3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 682 | ||
| STM32MP257F-EV1 | STMicroelectronics | Evaluation board with STM32MP257F MPU |
| 226 | ||
| STM32MP253CAL3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 100 | ||
| STM32MP253CAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 51 | ||
| STM32MP257FAL3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 9 | ||
| STM32MP253FAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP251FAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 1xEthernet, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP255CAL3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP255DAK3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN RoHS : Compliant |
| 0 | ||
| STM32MP251DAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 1xEthernet RoHS : Compliant |
| 0 | ||
| STM32MP255AAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN RoHS : Compliant |
| 0 | ||
| STM32MP253AAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN RoHS : Compliant |
| 0 | ||
| STM32MP251CAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 1xEthernet, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP251AAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 1xEthernet RoHS : Compliant |
| 0 | ||
 Bisco Industries | 62MP2500 | Micro Plastics Inc | 180 | |||
| 31-PMP-2.5-6 | MACHINE SCREWS | 167 | ||||
| MP250-C | Panduit Corp | 13 | ||||
 Onlinecomponents.com | MP25-2 | Custom Connector Corporation | Relay Accessories Plastic Spring for Electromechanical Relay RoHS : Compliant |
| 390 | |
 Rochester Electronics | LP38692MP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 16,000 | |
LP3852EMP-2.5/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 3,990 | ||
LP3962EMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.55V Dropout, BICMOS, PDSO5 RoHS : Not Compliant |
| 8,800 | ||
LP3965EMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.55V Dropout, BICMOS, PDSO5 RoHS : Not Compliant |
| 5,274 | ||
LP3965EMP-2.5/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG -5V 500mA 8-SOIC Tube RoHS : Compliant |
| 109 | ||
| LM1117MP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Not Compliant |
| 2,895 | ||
| LP3852EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 1,496 | ||
| LP38692MP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 5,729 | ||
| LP3872EMP-2.5/NOPB | National Semiconductor Corporation | Op Amp Standard 130kHz 14-SOIC T/R RoHS : Compliant |
| 3,961 | ||
| LP3874EMP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 965 | ||
| LP3962EMP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 0.55V Dropout, BICMOS, PDSO5 RoHS : Not Compliant |
| 194 | ||
| LP3965EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG -5V 500mA 8-SOIC Tube RoHS : Compliant |
| 204 | ||
| ECLAMP2508K.TCT | Semtech Corporation | EMI Filter LC (Pi) 250MHz L = 17nH, C = 12pF T/R RoHS : Compliant |
| 6,000 | ||
| RCLAMP2502L.TBT | Semtech Corporation | TVS Diode Steering (Rail to Rail) Uni-Directional 2.5V (Max) 20V 8-SOIC T/R RoHS : Compliant |
| 65 | ||
| UCLAMP2511T.TCT | Semtech Corporation | TVS Diode Zener Bi-Directional 2.5V (Max) 8V 0402 T/R RoHS : Compliant |
| 27,138 | ||
 Sager | PMP250-16 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | |
| PMP250-19 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| PMP250-13-3 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| PMP250-13-2 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| PMP250-13-1 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| 104-MP2.5S | TE Connectivity | TE Connectivity | 0 | |||
| WTMP-25B | ABB Group | Wire Labels & Markers |
| 0 | ||
| MP-254097-10-8A | TE Connectivity | Printers MP 1/.38 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
| LW6MP-25G | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Green |
| 0 | ||
| 118-MP2.5X | TE Connectivity | TE Connectivity | 0 | |||
| 119-MP2.5S | TE Connectivity | TE Connectivity | 0 | |||
| MP-254127-10-8A | TE Connectivity | Labels & Industrial Warning Signs MP 1/.5 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
| LW6MP-25W | IDEC Corporation | Pushbutton Switches 25mm Pilot Light White |
| 0 | ||
| LW6MP-25MW | IDEC Corporation | Pushbutton Switches 25mm Pilot Light White |
| 0 | ||
| MP-254254-10-8A | TE Connectivity | Printers MP 1/1 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
 TME | CMP250PS24 | XP Power | Power supply: switching; for building in; 250W; 24VDC; 10.4A; 89% RoHS : Compliant |
| 24 | |
| MP 25/22 | FIBOX | Mounting plate; steel; W: 175mm; L: 225mm; Thk: 1.5mm; zinc |
| 2 | ||
| MP-25043-150S | Amphenol Corporation | Protection cover; PIN: 150; internal bayonet,bayonet; sockets RoHS : Compliant |
| 0 | ||
| MP-25043-25L | Amphenol Corporation | Protection cover; PIN: 25; internal bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| MP-25043-150L | Amphenol Corporation | Protection cover; PIN: 150; internal bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| DMP25H18DLFDE-7 | Diodes Incorporated | Transistor: P-MOSFET; unipolar; -250V; -210mA; Idm: -1A; 1.4W RoHS : Compliant |
| 0 | ||
| MP-25042-85L | Amphenol Corporation | Protection cover; PIN: 85; external bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| MP-25043-19S | Amphenol Corporation | Protection cover; PIN: 19; internal bayonet,bayonet; sockets RoHS : Compliant |
| 0 | ||
| MP-25043-85S | Amphenol Corporation | Protection cover; PIN: 85; internal bayonet,bayonet; sockets RoHS : Compliant |
| 0 | ||
| NSYSPMP2560 | Schneider Electric | Mounting plate; galvanised steel; W: 147mm; L: 505mm |
| 0 | ||
| MP-25042-150L | Amphenol Corporation | Protection cover; PIN: 150; external bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| MP-25042-19L | Amphenol Corporation | Protection cover; PIN: 19; external bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
| MP2562DS-LF-Z | Monolithic Power Systems | PMIC; DC/DC converter; Uin: 4.5÷50V; 0.8÷47VDC; 1A; SO8; SMD; 4MHz RoHS : Compliant |
| 0 | ||
| MP-25043-85L | Amphenol Corporation | Protection cover; PIN: 85; internal bayonet,bayonet; plugs RoHS : Compliant |
| 0 | ||
MP-2522-01 | Same Sky | Connector: Jack 2,5mm; plug; male; audio video; straight; black RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | LP38692MP-2.5/NOPB | Texas Instruments | LP38692MP-2.5/NOPB , LDO 电压调节器, 1A, 2.5 V输出 ±2.5%, 2.7 → 10 V输入, 5针 SOT-223封装 RoHS : Compliant | 27,872 | ||
| LP3965EMP-2.5/NOPB | Texas Instruments | LP3965EMP-2.5/NOPB , LDO 电压调节器, 1.5A, 2.5 V输出 ±1.5%, 2.5 → 7 V输入, 5针 SOT-223封装 RoHS : Compliant | 26,315 | |||
LM2937IMP-2.5/NOPB | Texas Instruments | RoHS : Compliant | 10,000 | |||
| WSMP2512FR025FT0 | FSHY | 4,000 | ||||
 ComSIT USA | LM1117MP25NOPB | National Semiconductor Corporation | 800 MILLIAMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 2,448 | ||
| LP3961EMP25NOPB | National Semiconductor Corporation | 800 MILLI AMP FAST ULTRA LOW DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Compliant | 1,275 | |||
| LP3964EMP25NOPB | National Semiconductor Corporation | 800 MILLI AMP FAST ULTRA LOW DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Compliant | 1,155 | |||
| HLMP2500CATG | Avago Technologies | Visible LED RoHS : Compliant | 980 | |||
| LM1117MP25 | National Semiconductor Corporation | 800 MILLIAMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 975 | |||
| LM2937IMP25 | National Semiconductor Corporation | 400 MILLIAMP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, BIPolar, PDSO4 RoHS : Not Compliant | 895 | |||
| 4283SMP2520001 | ims | Electronic Component RoHS : Not Compliant | 610 | |||
| HLMP2500CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 8.89mm RoHS : Compliant | 360 | |||
| HLMP2550CATG | Avago Technologies | Visible LED RoHS : Compliant | 320 | |||
| HLMP2598 | Hewlett Packard Co | PANEL AND LEGEND MOUNT FOR LED LIGHT BARS LED Mounting Hardware RoHS : Not Compliant | 300 | |||
| LP3964EMP25 | National Semiconductor Corporation | 800 MILLI AMP FAST ULTRA LOW DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 100 | |||
| LP3871EMP25NOPB | Texas Instruments | LDO Regulator Pos 2.5V 0.8A 5-Pin(4+Tab) SOT-223 T/R RoHS : Compliant | 96 | |||
| HLMP2550CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 90 | |||
| HLMP2500G | Avago Technologies | Visible LED RoHS : Not Compliant | 21 | |||
| HLMP2550F3 | Hewlett Packard Co | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 16 | |||
 GLYN GmbH & Co. KG | TXMP-2550 | Ka-Ro electronics GmbH | Computer On Module - STM32MP255 Dual Core A35, 1. | 8 | ||
| TXMP-2570 | Ka-Ro electronics GmbH | Computer On Module - STM32MP257 Dual Core A35, 1. | 1 | |||
 Interstate Connecting Components | DCMP-25C3P-J-K127 | ITT Interconnect Solutions | DCMP25C3PJK127 RoHS : Compliant | 0 | ||
| DCMP-25X3P-J-K87 | ITT Interconnect Solutions | DCMP25X3PJK87 RoHS : Compliant | 0 | |||
| DBMP-25S-J-A197 | ITT Interconnect Solutions | D-SUB RECP 25C SKT RoHS : Compliant |
| 0 | ||
| DBMP-25S-J-A197 | ITT Interconnect Solutions | DBMP-25S-J-A197 RoHS : Compliant | 0 | |||
| DCMP-25X3S-J-K126 | ITT Interconnect Solutions | DCMP25X3SJK126 | 0 | |||
| DCMP-25H3P-J-K87 | ITT Interconnect Solutions | DCMP25H3PJK87 | 0 | |||
| MP-25043-37L | Amphenol Sine Systems | DUST CAP FOR M-4101 SERIES 37 | 0 | |||
| MP-25043-85S | Amphenol Sine Systems | DUST CAP FOR M-4101 SERIES 85 | 0 | |||
| MP-254097-10-8A | TE Connectivity | MP-254097-10-8A RoHS : Compliant | 0 | |||
| DBMMP-25P-F | ITT Interconnect Solutions | DBMMP-25P-F RoHS : Not Compliant | 0 | |||
| DBMMP-25P-F | ITT Interconnect Solutions | D-SUB PLUG 25C PIN RoHS : Not Compliant |
| 0 | ||
| DBMP-25P-J-K87 | ITT Interconnect Solutions | DBMP-25P-J-K87 RoHS : Compliant | 0 | |||
| DBMP-25P-J-K87 | ITT Interconnect Solutions | D-SUB PLUG 25C PIN RoHS : Compliant |
| 0 | ||
| DCMP-25C3P-J-K87 | ITT Interconnect Solutions | DCMP25C3PJK87 RoHS : Compliant | 0 | |||
| DCMP-25X3S-J-A197 | ITT Interconnect Solutions | DCMP25X3SJA197 RoHS : Compliant | 0 | |||
 NexGen Digital | LP3965EMP-2.5 | National Semiconductor Corporation | RoHS : Not Compliant | 517 | ||
 PEI Genesis | DBMMP25PFF225 | ITT Interconnect Solutions |
| 0 | ||
| DBMMP25PR | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PP | ITT Interconnect Solutions |
| 0 | |||
| DBMP25PJA101 | ITT Interconnect Solutions |
| 0 | |||
| DBMP25SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DCMP25C3PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMMP25S | ITT Interconnect Solutions |
| 0 | |||
| DBMP25PP | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PF | ITT Interconnect Solutions |
| 0 | |||
| DCMMP25H3PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DBMP25PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMP25PJ | ITT Interconnect Solutions |
| 0 | |||
| DCMP25M3PVA101 | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PJK87 | ITT Interconnect Solutions |
| 0 | |||
| DBMP25PC | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | MP-25043-54L | Amphenol Corporation | Connector RoHS : Compliant |
| 5 | |
| MP-25042-150L | Amphenol Corporation | Connector RoHS : Compliant |
| 3 | ||
| MP-25043-13S | Amphenol Corporation | Connector RoHS : Compliant |
| 3 | ||
| MP-25042-19S | Amphenol Corporation | Connector RoHS : Compliant |
| 2 | ||
| MP-25043-150L | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
| MP-25043-25S | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
| 1489MP25 | Hammond Manufacturing | 25PB 22MM 15X14X6 |
| 1 | ||
| MP-25043-19S | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
 PUI | EKMM401VNN680MP25U | United Chemi-Con Inc | RoHS : Compliant | 200 | ||
 Richardson RFPD | RCLAMP2502L.TBT | Semtech Corporation | ESD Suppressor Diode Diode Array Uni-Dir 2.5V 20Vc RoHS : Compliant |
| 9,000 | |
| ELXS3B1VSN181MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 180uF 315V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| EKMS3B1VSN181MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 180uF 315V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| MP250 | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) Seri RoHS : Compliant |
| 0 | ||
| AMP2511-05 | Astrodyne TDI Power Supplies & EMI Filters | INDUSTRIPOWER SUPPLY RoHS : Compliant | 0 | |||
| ELXS421VSN101MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 100uF 420V 20%( 22 X 25mm) Snap RoHS : Compliant | 0 | |||
| ECLAMP2504K.TCT | Semtech Corporation | ESD/EMI Protection for Color LCD Interfaces RoHS : Compliant |
| 0 | ||
| EKMS181VSN391MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 390uF 180V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| ELXS201VSN391MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 390uF 200V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| EKMS501VSN470MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 47uF 500V 20% (22 X 25mm) Snap- RoHS : Compliant | 0 | |||
| ELXS161VSN471MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 470uF 160V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| ELXS451VSN820MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 82uF 450V 20% (22 X 25mm) Snap- RoHS : Compliant | 0 | |||
| UCLAMP2511T.TNT | Semtech Corporation | ESD Suppressor Diode TVS Bi-Dir 2.5V 7.5Vc 2-Pin S RoHS : Compliant |
| 0 | ||
| MP250A | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) 20pF RoHS : Compliant |
| 0 | ||
| MP250B | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) 18pF RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | LP3962EMP-2,5 | INSTOCK | 39,635 | |||
| EKMS201VSN391MP25S | Chemi-Con | INSTOCK RoHS : Compliant | 3,300 | |||
| LP3872EMP-2.5 | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 2,956 | |||
| HLMP 2500 | INSTOCK | 1,742 | ||||
| MP25VS27MC5R7 | INSTOCK | 1,000 | ||||
| LM1117MP-2.5 | INSTOCK | 777 | ||||
| HLMP-2550 | INSTOCK | 748 | ||||
| HLMP-2500 | Broadcom Limited | INSTOCK RoHS : Compliant | 492 | |||
| EKMS201VSN391MP25S | Chemi-Con | INSTOCK RoHS : Compliant | 120 | |||
| MP2506W | ELITE | INSTOCK | 80 | |||
| EKMH160VSN682MP25T | United Chemi-Con Inc | INSTOCK | 1 | |||
 Avnet Abacus | SMP253EA4330MB31TR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4330MB31TR24) RoHS : Compliant | 1,200 | ||
| MP250 | CTS Corporation | Crystal 25MHz 2Pin HC49U Bulk (Alt: MP250) RoHS : Compliant | 0 | |||
| CMP250PS24 | XP Power | ACDC Open Frame Power Supply PSU ITE Medical 1 Output 500W 250 W 80V AC to 264V AC (Alt: CMP250PS24) RoHS : Compliant | 0 | |||
| CMP2512-JW-221ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-JW-221ELF) RoHS : Compliant | 0 | |||
| CMP2512AJW-220ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AJW-220ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-1601ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-1601ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-22R0ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-22R0ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-6802ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-6802ELF) RoHS : Compliant | 0 | |||
| CMP2512-FX-2000ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-2000ELF) RoHS : Compliant | 0 | |||
| CMP2512-FX-33R0ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-33R0ELF) RoHS : Compliant | 0 | |||
| CMP2512-FX-1003ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-1003ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-2701ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-2701ELF) RoHS : Compliant | 0 | |||
| SMP253EA4220MB31TR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4220MB31TR24) RoHS : Compliant | 0 | |||
| SMP255FC5820MD32TR32 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 82nF 20 125C (Alt: SMP255FC5820MD32TR32) RoHS : Compliant | 0 | |||
| SMP255FA5270MB31TR24 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 27 nF 20 125C (Alt: SMP255FA5270MB31TR24) RoHS : Compliant | 0 | |||
Avnet Asia | RCLAMP2504N.TCT | Semtech Corporation | (Alt: RCLAMP2504N.TCT) RoHS : Compliant | 0 | ||
| UCLAMP2511T.TCT | Semtech Corporation | Diode TVS Single Bi-Dir 2.5V 40W 2-Pin SLP1006P2 T/R (Alt: UCLAMP2511T.TCT) RoHS : Compliant | 0 | |||
| RCLAMP2574NQTCT | Semtech Corporation | (Alt: RCLAMP2574NQTCT) RoHS : Compliant | 0 | |||
 Avnet Silica | AP2132BMP-2.5TRG1 | Diodes Incorporated | LDO Voltage Regulator Fixed 14 to 55 V in 300 mV Drop 25 V2 A out PSOP88 (Alt: AP2132BMP-2.5TRG1) RoHS : Compliant | 4,000 | ||
| ECLAMP2522P.TCT | Semtech Corporation | Diode TVS Quad BiDir 55V 6Pin SLP EP TR (Alt: ECLAMP2522P.TCT) RoHS : Compliant | 3,000 | |||
| STM32MP257FAI3 | STMicroelectronics | STM32MP257FAI3 (Alt: STM32MP257FAI3) RoHS : Compliant | 300 | |||
| STM32MP255CAK3 | STMicroelectronics | Microcontrollers Microprocesso (Alt: STM32MP255CAK3) RoHS : Compliant | 238 | |||
| STM32MP257DAL3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAL3) RoHS : Compliant | 168 | |||
| STM32MP257F-DK | STMicroelectronics | Discovery Board STM32MP257FAK3 32 64bit ARM CortexA35CortexM33F (Alt: STM32MP257F-DK) RoHS : Compliant | 9 | |||
| MP2541DJ-LF-Z | Monolithic Power Systems | MPSMP2541DJLFZ (Alt: MP2541DJ-LF-Z) RoHS : Compliant | 0 | |||
MP2560DQ-LF-Z | Monolithic Power Systems | Conv DCDC Single Step Down 45V to 42V 10Pin QFN EP TR (Alt: MP2560DQ-LF-Z) RoHS : Compliant | 0 | |||
| STM32MP253FAI3 | STMicroelectronics | STM32MP253FAI3 (Alt: STM32MP253FAI3) RoHS : Compliant | 0 | |||
| STM32MP251CAK3 | STMicroelectronics | Microprocessor 3 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP251CAK3) RoHS : Compliant | 0 | |||
| STM32MP253AAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP253AAK3) RoHS : Compliant | 0 | |||
| STM32MP251AAL3 | STMicroelectronics | Microprocessor 3 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP251AAL3) RoHS : Compliant | 0 | |||
| STM32MP257FAK3 | STMicroelectronics | Microcontrollers microprocesso (Alt: STM32MP257FAK3) RoHS : Compliant | 0 | |||
| RCLAMP2504N.TCT | Semtech Corporation | ESD Protection Device 15 V SLP2626P10 10 Pins 25 V 5 pF (Alt: RCLAMP2504N.TCT) RoHS : Compliant | 0 | |||
| RCLAMP2502L.TBT | Semtech Corporation | ESD Protection Device 20 V SOIC 8 Pins 25 V 10 pF (Alt: RCLAMP2502L.TBT) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | CC-WMP255-KIT | Digi International Inc | ConnectCore MP255 Development Kit incl. dev board with ConnectCore MP255 Dual, 8GB eMMC, 1GB DDR4, Wireless SOM RoHS : Compliant |
| 0 | |
 Chip-Germany GmbH | LM2937IMP-2.5/NOPB | National Semiconductor Corporation | RoHS : Compliant | 5 | ||
 Component Electronics, Inc | LP38693MP-2.5/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | |
| LM2937IMP-2.5 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 847 | ||
| HLMP-2500-S22 | Agilent Technologies Inc | IN STOCK SHIP TODAY |
| 269 | ||
| LP3961EMP-2.5 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| HLMP-2500 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 120 | ||
| ESMH500VSN222MP25T | Chemi-Con | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| EKMQ351VSN121MP25S | United Chemi-Con Inc | IN STOCK SHIP TODAY | 62 | |||
| 684JMP250 | IN STOCK SHIP TODAY |
| 46 | |||
| HLMP-2500 | Hewlett Packard Co | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
| MP250 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| LP3964EMP-2.5/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
| HLMP-2550 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| LP3965EMP-2.5/NOPB | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
 DB Roberts | 62MP2500 | Essentra Components | 0 | |||
| 62MP2500N | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN H | 0 | |||
| 62MP2500W | Essentra Components | 0 | ||||
| 22MP25031W | Essentra Components | SNAP BUSHING, 2.500 HOLE, 1.96 | 0 | |||
| 22MP25031 | Essentra Components | SNAP BUSHING, 2.500 HOLE, 1.96 | 0 | |||
 EBV Elektronik | HLMP-2500 | Broadcom Limited | LED Single Color Light Bar Green 571nm 30mA 4Pin SIP Tube (Alt: HLMP-2500) RoHS : Compliant | 1,280 | ||
| HLMP-2500-GH000 | Broadcom Limited | LED Single Light Bar Green 571nm 30mA 4Pin SIP Tube (Alt: HLMP-2500-GH000) RoHS : Compliant | 320 | |||
| STM32MP253FAI3 | STMicroelectronics | STM32MP253FAI3 (Alt: STM32MP253FAI3) RoHS : Compliant | 0 | |||
| STM32MP255CAJ3 | STMicroelectronics | STM32MP (Alt: STM32MP255CAJ3) RoHS : Compliant | 0 | |||
| STM32MP251AAL3 | STMicroelectronics | Microprocessor 3 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP251AAL3) RoHS : Compliant | 0 | |||
| STM32MP257FAK3 | STMicroelectronics | Microcontrollers microprocesso (Alt: STM32MP257FAK3) RoHS : Compliant | 0 | |||
| STM32MP253CAJ3 | STMicroelectronics | STM32MP (Alt: STM32MP253CAJ3) RoHS : Compliant | 0 | |||
| STM32MP253DAL3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP253DAL3) RoHS : Compliant | 0 | |||
| STM32MP257CAI3 | STMicroelectronics | STM32MP (Alt: STM32MP257CAI3) RoHS : Compliant | 0 | |||
| STM32MP253FAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP253FAK3) RoHS : Compliant | 0 | |||
| STM32MP255CAL3 | STMicroelectronics | STM32MP (Alt: STM32MP255CAL3) RoHS : Compliant | 0 | |||
| STM32MP253CAI3 | STMicroelectronics | STM32MP (Alt: STM32MP253CAI3) RoHS : Compliant | 0 | |||
| STM32MP257FAL3 | STMicroelectronics | STM32MP (Alt: STM32MP257FAL3) RoHS : Compliant | 0 | |||
| STM32MP255DAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP255DAK3) RoHS : Compliant | 0 | |||
| STM32MP257AAL3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP257AAL3) RoHS : Compliant | 0 | |||
 FDH Electronics | HAR MP25DVS | FDH Electronics | Wire Placehldr | 2 | ||
 Maritex | TACTDF52H16MP250-JL | Jialong | Tact Switch; SMD; dimensions 5.2x5.2; h=1.5mm; dust-proof; operating force 250gf; button: round |
| 2,972 | |
 Neutron USA | IMP-250-22 | Orion Fans | Fan Accessories Metal Impeller for OAM Open Frame Motor Series, 250mm x 22 Degree |
| 23 | |
| CMP250PS24 | XP Power | Power Supply; AC-DC; 24V@10.4A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 8 | ||
| CMP250PS48 | XP Power | Power Supply; AC-DC; 48V@5.2A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 3 | ||
| SLPMP25-690 | Banner Engineering Corp | Safety Light Curtains Low Profile Muting Pair; Res.: 25 mm Response (Tr): 12.5 ms; Beams: 35; Rng: 0.1-7 m (4 in - 23 ft); ht. 690 mm (27.1 in); Integral RD |
| 0 | ||
| CMP250PS36 | XP Power | Power Supply; AC-DC; 36V@6.9A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 0 | ||
| MP25TA00 | Red Lion Controls | MP-25TA MAGNETIC SENSOR |
| 0 | ||
 Pasternack Enterprises US | PE3MP2544 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003 Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable. | 5 | ||
| PE3MP2546 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002 Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002 cable. | 5 | |||
| PE3MP2540 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001 Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable. | 5 | |||
| PE3MP2542-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable. |
| 2 | ||
| PE3MP2547-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Solder, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Blunt Cut Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02002, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB solder cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and blunt cut genderless on end 2. PE3MP2547-48 can also be known as a 1553 TRB female to blunt cut blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut blunt cut genderless cable assembly PE3MP2547-48 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack solder to blunt cut blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2547-48 can also be used in the other direction and will be blunt cut blunt cut genderless to TRB jack solder cable assembly if the opposite connectivity is required. 1553 TRB female solder to blunt cut blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable. |
| 2 | ||
| PE3MP2547-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Solder, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Blunt Cut Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02002, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB solder cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and blunt cut genderless on end 2. PE3MP2547-60 can also be known as a 1553 TRB female to blunt cut blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut blunt cut genderless cable assembly PE3MP2547-60 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack solder to blunt cut blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2547-60 can also be used in the other direction and will be blunt cut blunt cut genderless to TRB jack solder cable assembly if the opposite connectivity is required. 1553 TRB female solder to blunt cut blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 60" cable. |
| 2 | ||
| PE3MP2546-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-12 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable. |
| 1 | ||
| PE3MP2540-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable. |
| 1 | ||
| PE3MP2546-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-60 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-60 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable. |
| 1 | ||
| PE3MP2546-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 24" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-24 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-24 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 24" cable. |
| 1 | ||
| PE3MP2544-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544-48 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 48" cable. |
| 1 | ||
| PE3MP2540-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540-12 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 12" cable. |
| 1 | ||
| PE3MP2544-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544-60 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable. |
| 1 | ||
| PE3MP2543-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-60 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 60" cable. |
| 0 | ||
| PE3MP2543-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable. |
| 0 | ||
 Vyrian | LP38692MP-2-5-NOPB | Texas Instruments | 9,750 | |||
| DMP2540UCB9-7 | Diodes Incorporated | Small Signal Field-Effect Transistor, 4A I(D), 25V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET | 9,665 | |||
| STM32MP255CAJ3 | STMicroelectronics | RoHS : Compliant | 8,995 | |||
| STM32MP253FAI3 | STMicroelectronics | RoHS : Compliant | 7,593 | |||
| MT42L256M16D1MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX16, CMOS, PBGA220 | 6,397 | |||
| MT42L192M32D2MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 192MX32, 10ns, CMOS, PBGA220 RoHS : Compliant | 6,101 | |||
| LP38693MP-2-5-NOPB | Texas Instruments | 5,742 | ||||
| PMP2552 | Texas Instruments | 5,504 | ||||
| MT42L64M64D3MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX64, CMOS, PBGA220 RoHS : Compliant | 5,486 | |||
| MT42L128M16D1MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX16, CMOS, PBGA220 RoHS : Compliant | 5,246 | |||
| MT42L192M32D2MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 192MX32, 10ns, CMOS, PBGA220 RoHS : Compliant | 4,416 | |||
| MT42L256M32D2MP-25AAT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX32, CMOS, PBGA220 RoHS : Compliant | 3,906 | |||
| MT42L64M32D3MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX32, CMOS, PBGA220 RoHS : Compliant | 2,992 | |||
| MT42L64M64D2MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX64, CMOS, PBGA220 | 2,775 | |||
| MT42L128M16D1MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX16, CMOS, PBGA220 RoHS : Compliant | 2,345 | |||
 Win Source Electronics | UCLAMP2501T.TCT | Semtech Corporation | Low Voltage Clamp 2.5V TVS Diode RoHS : Compliant |
| 125,888 | |
| MP2562DS-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 1A 8SOIC RoHS : Compliant |
| 57,540 | ||
| RCLAMP2504N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 15VC 10SLP RoHS : Compliant |
| 28,080 | ||
| MP2560DN-LF | Monolithic Power Systems | IC REG BUCK ADJ 2.5A RoHS : Compliant |
| 25,000 | ||
LM1117MP-2.5/NOPB | Texas Instruments | IC REG LDO 2.5V 0.8A SOT223 RoHS : Compliant |
| 12,760 | ||
| RCLAMP2502L.TBT | Semtech Corporation | TVS DIODE 2.5VWM 20VC 8SOIC RoHS : Compliant |
| 7,900 | ||
| UCLAMP2511T.TCT | Semtech Corporation | TVS DIODE 2.5VWM 8VC RoHS : Compliant |
| 7,594 | ||
| LM1117MP-2.5 | National Semiconductor Corporation | IC REG LINEAR FIXED POS LDO REG RoHS : Not Compliant |
| 5,000 | ||
LM2937IMP-2.5 | Texas Instruments | LM2937-2.5, LM2937-3.3 400mA and 500mA Voltage Regulators | IC REG LIN 2.5V 400MA SOT223-4 RoHS : Not Compliant |
| 2,905 | ||
| DMP25H18DLFDE-7 | Diodes Incorporated | MOSFET P-CH 250V 260MA 6UDFN / P-Channel 250 V 260mA (Ta) 600mW (Ta) Surface Mount U-DFN2020-6 (Type E) RoHS : Compliant |
| 2,865 | ||
LP3961EMP-2.5/NOPB | Texas Instruments | IC REG LDO 2.5V 0.8A SOT223-5 RoHS : Compliant |
| 1,340 | ||
| LP3964EMP-2.5 | Texas Instruments | LP396x 800-mA Fast Ultra-Low-Dropout Linear Regulators | IC REG LIN 2.5V 800MA SOT223-5 RoHS : Not Compliant |
| 930 | ||
| EKMM401VSN820MP25S | United Chemi-Con Inc | CAP ALUM 400V POLAR |
| 900 | ||
| LM2937IMP-2.5/NOPB | Texas Instruments | IC REG LDO 2.5V 0.4A SOT223 RoHS : Compliant |
| 899 | ||
| LP3961EMP-2.5 | Texas Instruments | LP396x 800-mA Fast Ultra-Low-Dropout Linear Regulators | IC REG LIN 2.5V 800MA SOT223-5 RoHS : Not Compliant |
| 827 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand