| Electronic Components Datasheet Search |
|
MP24 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | SMP24A-M3/84A | Vishay Intertechnologies | Diode: TVS; 400W; 26.7V; 10.3A; unidirectional; DO220AA,SMP; SMP RoHS : Compliant |
| 2,958 | |
| ECLAMP2410P.TCT | Semtech Corporation | Filter: digital; line terminator; lowpass,EMI; SLP4016P16; Ch: 6 RoHS : Compliant |
| 2,219 | ||
| MP2456GJ-Z | Monolithic Power Systems | PMIC; DC/DC converter; Uin: 4.5÷50VDC; Uout: 0.81÷45VDC; 0.5A; SMD RoHS : Compliant |
| 473 | ||
| G88MP24102MEU | Amphenol Corporation | Connector: wire-board; male; data; PIN: 24; shrouded; tinned; 250VAC |
| 390 | ||
| ECLAMP2455P.TCT | Semtech Corporation | Filter: digital; line terminator; lowpass,EMI; SLP2116P8; Ch: 3 RoHS : Compliant |
| 0 | ||
| BE42MP/24 | Beta Electric | Wrench: combination spanner; 24mm; Overall len: 280mm; 42LMP |
| 0 | ||
| BE42LMP/24 | Beta Electric | Wrench: combination spanner; 24mm; Overall len: 338mm; 42LMP |
| 0 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Diode: TVS; ESD; 100W; 26.7÷36V; 2A; bidirectional; SLP1006P2T RoHS : Compliant |
| 0 | ||
PMP2425WPH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 25A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
| ECLAMP2455K.TCT | Semtech Corporation | Filter: digital; line terminator; lowpass,EMI; SLP1713P8; Ch: 3 RoHS : Compliant |
| 0 | ||
PMP2490WPH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 90A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
PMP2490WP![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 90A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
MP2451DT-LF-Z![]() | Monolithic Power Systems | PMIC; DC/DC converter; Uin: 3.3÷36VDC; Uout: 0.8÷28.8VDC; 0.6A RoHS : Compliant |
| 0 | ||
PMP2450WH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 50A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
| TPSMP24AHM3_A/I | Vishay Intertechnologies | Diode: TVS; 400W; 22.8V; 12A; unidirectional; DO220AA,SMP RoHS : Compliant |
| 0 | ||
![]() Verical | MP2456GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 50V Step Down Single-Out 0.81V to 45V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | |
| MP2459GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 55V Step Down Single-Out 0.81V to 52.25V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2460GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 45V Synchronous Step Down Single-Out 0.8V to 44.1V 0.6A 6-Pin TSOT-23 RoHS : Compliant |
| 6,000 | ||
| MP240D4 | Crydom Inc | Solid State Relay 32V DC-IN 4A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 805 | ||
| MP24M23G10 | Amphenol Corporation | Contact PIN 16 Size Crimp ST Cable Mount 24-26AWG eco/mate® RoHS : Compliant |
| 475 | ||
| MP24W23F | Amphenol Sine Systems | Contact PIN 20 Size Crimp ST Cable Mount 24-26AWG eco/mate® RoHS : Compliant |
| 434 | ||
| MP240 | CTS Corporation | Crystal 24MHz ±30ppm (Tol) ±50ppm (Stability) Series 3rd Overtone 55Ohm 2-Pin HC-49/US Thru-Hole Bulk RoHS : Compliant |
| 350 | ||
| MP240D3 | Crydom Inc | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 169 | ||
| MP24W23F | Amphenol Sine Systems | Contact PIN 20 Size Crimp ST Cable Mount 24-26AWG eco/mate® RoHS : Compliant |
| 125 | ||
| MP 2419 | FIBOX | MP 2419 |
| 102 | ||
| MP240D4 | Sensata Technologies | Solid State Relay 32V DC-IN 4A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 45 | ||
| MP240D2 | Opto 22 | Relay SSR 240V AC-IN 4-Pin |
| 33 | ||
| MP240D4 | Sensata Technologies | Solid State Relay 32V DC-IN 4A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 28 | ||
| MP240D3 | Crydom Inc | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 27 | ||
| MP240D4-17 | Opto 22 | Relay SSR 280V AC-IN 4-Pin |
| 7 | ||
![]() Avnet Americas | ECLAMP2454P.TCT | Semtech Corporation | - Tape and Reel (Alt: ECLAMP2454P.TCT) RoHS : Not Compliant |
| 12,000 | |
| ECLAMP2410P.TCT | Semtech Corporation | EMI Filter Flat Style SMD T/R - Tape and Reel (Alt: ECLAMP2410P.TCT) RoHS : Not Compliant |
| 6,000 | ||
| MP2459GJ-Z | Monolithic Power Systems | DC/DC Switching Regulator, Adjustable, Buck (Step Down), Single Output, 0.81 V to 52.25 V, 500 mA - Tape and Reel (Alt: MP2459GJ-Z) RoHS : Compliant |
| 3,000 | ||
| HLMP-2450 | Broadcom Limited | - Rail/Tube (Alt: HLMP-2450) RoHS : Compliant |
| 2,112 | ||
| MP240 | CTS Corporation | - Bulk (Alt: MP240) RoHS : Compliant |
| 36 | ||
| MP2454GQ-P | Monolithic Power Systems | - Tape and Reel (Alt: MP2454GQ-P) RoHS : Compliant |
| 0 | ||
| MP2460GJ-Z | Monolithic Power Systems | DC-DC Switching Synchronous Buck Regulator, Adjustable, 4.5V-45V, 0.8V-44.1V/0.6A, TSOT-23-6 - Tape and Reel (Alt: MP2460GJ-Z) RoHS : Compliant |
| 0 | ||
| MP24833-AGN-Z | Monolithic Power Systems | - Tape and Reel (Alt: MP24833-AGN-Z) RoHS : Compliant |
| 0 | ||
MP2490DQ-LF-Z![]() | Monolithic Power Systems | Conv DC-DC Single Step Down 4.5V to 36V 10-Pin QFN EP T/R - Tape and Reel (Alt: MP2490DQ-LF-Z) RoHS : Compliant |
| 0 | ||
| MP24971DS-LF-Z | Monolithic Power Systems | Conv DC-DC Single Step Down 8V to 50V 8-Pin SOIC T/R - Tape and Reel (Alt: MP24971DS-LF-Z) RoHS : Compliant |
| 0 | ||
| DDMP-24H7S-J-K126 | ITT Interconnect Solutions | - Bulk (Alt: DDMP-24H7S-J-K126) RoHS : Not Compliant | 0 | |||
| MP245B | CTS Corporation | - Bulk (Alt: MP245B) RoHS : Compliant |
| 0 | ||
MP2467DN-LF-Z![]() | Monolithic Power Systems | Conv DC-DC Single Step Down 6V to 36V 8-Pin SOIC N EP T/R - Tape and Reel (Alt: MP2467DN-LF-Z) RoHS : Compliant |
| 0 | ||
| MP24830HL-LF-Z | Monolithic Power Systems | QFN-14/BUCK BOOST POWER LEVERAGE LED DRIVER FOR TV LED BACKLIGHT - Tape and Reel (Alt: MP24830HL-LF-Z) RoHS : Compliant | 0 | |||
| MP2488DQ-LF-P | Monolithic Power Systems | LED DRVR Buck 1-CH PWM 52V 2A 10-Pin QFN T/R - Tape and Reel (Alt: MP2488DQ-LF-P) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | MP24M23F | Amphenol Corporation | Standard Circular Contacts Pin Contact Sz 16 Wire 24-26AWG RoHS : Compliant |
| 54,131 | |
| MP2459GJ-P | Monolithic Power Systems | Switching Voltage Regulators 0.5A, 55V, 480kHz Step-Down Converter RoHS : Compliant |
| 45,212 | ||
| MP2489DN-LF-Z | Monolithic Power Systems | LED Lighting Driver ICs 6V-60V 1A Buck LED Driver RoHS : Compliant |
| 26,143 | ||
| MP24833-AGN-Z | Monolithic Power Systems | LED Lighting Driver ICs 3A 200kHz Internal Power MOSFET RoHS : Compliant |
| 5,825 | ||
| MP2489DJ-LF-Z | Monolithic Power Systems | LED Lighting Driver ICs 6V-60V 1A Buck LED Driver RoHS : Compliant |
| 5,436 | ||
| MP2456GJ-P | Monolithic Power Systems | Switching Voltage Regulators 0.5A, 50V, 1.2MHz Step-Down Converter RoHS : Compliant |
| 2,956 | ||
| MP2451DJ-LF-P | Monolithic Power Systems | Switching Voltage Regulators 600mA/36V, 2MHz Non- sync Buck in TSOT23 RoHS : Compliant |
| 1,609 | ||
| MP2491NGQB-P | Monolithic Power Systems | Switching Voltage Regulators 32V, 6A, High-Efficeincy Synchronous Step-Down Converter with External Soft Start RoHS : Compliant |
| 1,500 | ||
| MP2480DN-LF-Z | Monolithic Power Systems | LED Lighting Driver ICs 3A 36V Buck w/LED Driver RoHS : Compliant |
| 1,209 | ||
| MP240A | CTS Corporation | Crystals 24MHz 20pF 30ppm -20/70 RoHS : Compliant |
| 915 | ||
| MP2489DQ-LF-P | Monolithic Power Systems | LED Lighting Driver ICs 6V-60V 1A Buck LED Driver RoHS : Compliant |
| 891 | ||
| MP2467DN-LF-P | Monolithic Power Systems | Switching Voltage Regulators 2.5A, 36V, 0.5MHz Nonsync Step-Down |
| 636 | ||
| MP24M23G30 | Amphenol Corporation | Standard Circular Contacts Pin Contact, Machined, Size 16, Gold 30", Wire Range .14-.25mm, 26-24 AWG RoHS : Compliant |
| 503 | ||
| MP2410GJE-P | Monolithic Power Systems | LED Lighting Driver ICs 2A 1MHz to 97% Effic Sync Buck analog RoHS : Compliant |
| 307 | ||
| MP240D2 | Opto 22 | Solid State Relays - PCB Mount MP Model, 240 VAC, 2 Amp, DC Control Solid State Relay (SSR) RoHS : Compliant |
| 81 | ||
![]() Arrow Electronics | MP24833-AGN-Z | Monolithic Power Systems | White LED Driver RoHS : Compliant |
| 7,500 | |
| MP2459GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 55V Step Down Single-Out 0.81V to 52.25V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2456GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 50V Step Down Single-Out 0.81V to 45V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2451DT-LF-Z | Monolithic Power Systems | Conv DC-DC 3.3V to 36V Step Down Single-Out 0.8V to 28.8V 0.6A 6-Pin SOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2460GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 45V Synchronous Step Down Single-Out 0.8V to 44.1V 0.6A 6-Pin TSOT-23 RoHS : Compliant |
| 6,000 | ||
| MP2491CGQB-Z | Monolithic Power Systems | Conv DC-DC 4V to 32V Synchronous Step Down Single-Out 0.5V to 30V 6A 13-Pin QFN T/R RoHS : Compliant |
| 5,000 | ||
| MP240D3 | Crydom Inc | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 169 | ||
![]() Newark | MP-24-12-2-TGG | SPC Multicomp | Conn Rf/Coax, Smb Coaxial, R/A Jack; |Multicomp Pro MP-24-12-2-TGG RoHS : Compliant |
| 2,329 | |
| MP24894GJ-P | Monolithic Power Systems | Led Driver, Buck, 1Mhz, Tsot-6; |Monolithic Power Systems (Mps) MP24894GJ-P RoHS : Compliant |
| 892 | ||
| MP24894GJ-P | Monolithic Power Systems | Led Driver, Buck, 1Mhz, Tsot-6; |Monolithic Power Systems (Mps) MP24894GJ-P RoHS : Compliant |
| 892 | ||
| MP-24-06L-TGG | SPC Multicomp | Rf Coaxial, Smb, Jack, 50Ohm, Crimp; |Multicomp Pro MP-24-06L-TGG RoHS : Compliant |
| 866 | ||
MP2481DH-LF-P![]() | Monolithic Power Systems | Led Driver, Buck, 1.4Mhz, Hmsop; |Monolithic Power Systems (Mps) MP2481DH-LF-P RoHS : Compliant |
| 554 | ||
MP2481DH-LF-P![]() | Monolithic Power Systems | Led Driver, Buck, 1.4Mhz, Hmsop; |Monolithic Power Systems (Mps) MP2481DH-LF-P RoHS : Compliant |
| 554 | ||
| MP-24-02L-1-TGG | SPC Multicomp | Rf Coaxial, Smb, Jack, 50Ohm, Clamp; |Multicomp Pro MP-24-02L-1-TGG RoHS : Compliant |
| 280 | ||
| SSRMP-240D10R | TE Connectivity | Solid State Relay, Spst, 10A, 24-280Vac; |Te Connectivity Potter&brumfield SSRMP-240D10R RoHS : Compliant |
| 271 | ||
| MP-24-01L-1-TGG | SPC Multicomp | Conn Rf/Coax, Smb Coaxial, Straight Plug; |Multicomp Pro MP-24-01L-1-TGG RoHS : Compliant |
| 199 | ||
UCLAMP2401T.TCT![]() | Semtech Corporation | Dio, Transient, 50V, Unidirectional, 24V; |Semtech UCLAMP2401T.TCT RoHS : Compliant |
| 69 | ||
UCLAMP2401T.TCT![]() | Semtech Corporation | Dio, Transient, 50V, Unidirectional, 24V; |Semtech UCLAMP2401T.TCT RoHS : Compliant |
| 69 | ||
PMP2425W![]() | Crydom Inc | Solid State Relay, Spst-No, 25A, 0-10Vdc; |Sensata/crydom PMP2425W RoHS : Compliant |
| 24 | ||
PMP2425WP![]() | Crydom Inc | Ssr, Spst-No, 25A, 0-10Vdc, Panel; |Sensata/crydom PMP2425WP RoHS : Compliant |
| 12 | ||
PMP2425WPH![]() | Crydom Inc | Ssr, Spst-No, 25A, 0-10Vdc, Panel; |Sensata/crydom PMP2425WPH RoHS : Compliant |
| 10 | ||
| DRA1-MP240D3 | Crydom Inc | Ssr, Din Module, 280Vac, 3A; |Sensata/crydom DRA1-MP240D3 RoHS : Compliant |
| 9 | ||
![]() RS | MP240D4 (NULL) | Opto 22 | SOLID STATE RELAY, 280 VAC, SPST-NO, 4A/240VAC, ZERO SWITCHING, MP SERIES |
| 196 | |
PMP2425WP![]() | Crydom Inc | SOLID STATE RELAY, 10 VDC, SPST-NO, 25A/280VAC, ZERO SWITCHING, PMP SERIES RoHS : Compliant |
| 78 | ||
| MP240D3 | Crydom Inc | RELAY, 0.02 TO 3 A (RMS), 24 TO 280 V (RMS) @ 47 TO 63 HZ, AC RoHS : Compliant |
| 30 | ||
| MP240D4 | Crydom Inc | RELAY, 0.02 TO 4 A (RMS), 24 TO 280 V (RMS) @ 47 TO 63 HZ, AC RoHS : Compliant |
| 18 | ||
| DRA1-MP240D3 | Crydom Inc | RELAY; SOLID STATE; DIN MOUNT; 280 VAC/3 A OUTPUT; 3-32 VDC INPUT RoHS : Compliant |
| 14 | ||
PMP2425WH![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULTIFUNCTION, PANEL MOUNT, 280VAC/25A, TP RoHS : Compliant |
| 7 | ||
PMP2425W![]() | Crydom Inc | SOLID STATE RELAY, 10 VDC, SPST-NO, 25A/280V, ZERO SWITCHING, PMP SERIES RoHS : Compliant |
| 6 | ||
PMP2450W![]() | Crydom Inc | PROPORTIONAL CONTROL SSR MULTIFUNCTION PANEL MOUNT 280VAC/50A RoHS : Compliant |
| 6 | ||
PMP2450WP![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULTIFUNCTION, PANEL MOUNT, 280VAC/50A, IOP RoHS : Compliant |
| 5 | ||
| MP 2419 (5518024) | FIBOX | SHEET STEEL METAL MOUNTING PLATE FOR TEMPO |
| 5 | ||
PMP2450WPH![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULTIFUNCTION, PANEL MOUNT, 280VAC/50A, IOP, TP RoHS : Compliant |
| 3 | ||
| MP240D4-17 (NULL) | Opto 22 | RELAY 4 A (NOM.) 240 VAC 5 MA (MAX.) OFF-STATE SOLID STATE, MP SERIES |
| 3 | ||
| M/P24121/4 | Norgren | CYLINDER ACCESSORY/REPLACEMENT PART, INDICATOR C/W GASKET, 24VDC |
| 2 | ||
| MP2-42G10L1 | ABB Low Voltage Products and Systems | PB MAIN FLSH GRN 1NO LED 130V |
| 2 | ||
| FM-MP2-40-KIT | Bimba Manufacturing Company | MOUNTING KIT, FOR 4IN BORE, MP2 SERIES |
| 1 | ||
![]() Onlinecomponents.com | MP2402A.41 | Belden Inc | RoHS : Compliant |
| 0 | |
| MP2402A-BLK | Belden Inc | RoHS : Compliant |
| 0 | ||
| MP240D2 | Crydom Inc | Ratings up to 5A @ 280 VAC and up to 5A @ 100 VDC & 3A @ 60 VDC - 5 or 24 VDC control voltage - 4kV optical isolation - Industry standard 0.4" housing RoHS : Compliant |
| 0 | ||
| MP2402A-BLK-1000 | Belden Inc | RoHS : Compliant |
| 0 | ||
| MP24M23G30 | Amphenol Sine Systems | Pin Contact, Machined, Size 16, Gold 30µ", Wire Range .14-.25mm², 26-24 AWG RoHS : Compliant |
| 0 | ||
| MP240D4-MS11 | Crydom Inc | SOLID STATE RELAY 24-280 V - DIN Mt 280 VAC/3A out 3-32 VDC input,ZC RoHS : Compliant |
| 0 | ||
| MP24W23G15 | Amphenol Sine Systems | Pin Contact, Machined, Gold 15µ", Wire Range .13-.25mm², 26-24 AWG RoHS : Compliant |
| 0 | ||
| MP24GS | Thomas & Betts | Pos-E-Kon™ Male Crimp Pin - Copper Alloy - Gold Plated - 28-24AWG/0.25 mm² - 5 Amp - 63 VAC RoHS : Compliant |
| 0 | ||
| MP2426 | Cooper Crouse-Hinds | MP2426 RoHS : Compliant |
| 0 | ||
| MP2402A.99 | Belden Inc | RoHS : Compliant |
| 0 | ||
| MP24W23G30 | Amphenol Sine Systems | Pin Contact, Machined, Gold 30µ", Wire Range .13-.25mm², 26-24 AWG RoHS : Compliant |
| 0 | ||
| MP240 | CTS Corporation | Crystal 24MHz ±30ppm (Tol) ±50ppm (Stability) Series FUND 25Ohm 2-Pin HC-49/US Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| MP240-E | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
| MP240A | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
| MP240A-E | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | ECLAMP2410P.TCT | Semtech Corporation | EMI Filter RC (Pi) R = 45Ohm, C = 12pF 16-SON T/R RoHS : Compliant |
| 10,653 | |
| ECLAMP2410PQTCT | Semtech Corporation | EMI Filter RC (Pi) R = 45Ohm, C = 15pF T/R RoHS : Compliant |
| 9,000 | ||
| ECLAMP2454P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 8-SON T/R RoHS : Compliant |
| 1,000 | ||
| ECLAMP2455K.TCT | Semtech Corporation | EMI FILTER Low Pass RC (Pi) 8-SON T/R RoHS : Compliant |
| 12,371 | ||
| ECLAMP2455P.TCT | Semtech Corporation | EMI Filter RC (Pi) R = 47Ohm, 100Ohm, C = 20pF 8-SON T/R RoHS : Compliant |
| 25,095 | ||
| ECLAMP2456P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 12-SON T/R RoHS : Compliant |
| 1,500 | ||
| ECLAMP2458P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 16-SON T/R RoHS : Compliant |
| 27,820 | ||
| RCLAMP2431T.TCT | Semtech Corporation | TVS Diode Zener Bi-Directional 24V (Max) 50V 0402 T/R RoHS : Compliant |
| 33,409 | ||
| UCLAMP2461P.TNT | Semtech Corporation | TVS Diode Zener Uni-Directional 24V (Max) 65V 2-SON T/R RoHS : Compliant |
| 50,000 | ||
![]() Sager | MP240D3 | Crydom Inc | Solid State Relays - PCB Mount PCB SIP SSR 280VAC 3A, 3-32VDC, ZC RoHS : Compliant |
| 67 | |
| DRA1-MP240D3 | Crydom Inc | Solid State Relays - Industrial Mount DIN Mt 280 VAC/3A out 3-32 VDC input RoHS : Compliant |
| 13 | ||
PMP2425W![]() | Crydom Inc | Solid State Relays - Industrial Mount 25A 90-280 VAC w/ elevator screw RoHS : Compliant |
| 7 | ||
| S8802MP240RTN | TE Connectivity | TE Connectivity | 0 | |||
| LW6MP-24S | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Blue |
| 0 | ||
| LW6MP-24Y | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Yellow |
| 0 | ||
PMP2425WPH![]() | Crydom Inc | Solid State Relays - Industrial Mount 25A 90-280VAC IOP/TP Elevator Scrw RoHS : Compliant |
| 0 | ||
PMP2450WPH![]() | Crydom Inc | Solid State Relays - Industrial Mount 50A 90-280VAC IOP/TP Elevator Scrw RoHS : Compliant |
| 0 | ||
| LW6MP-24W | IDEC Corporation | Pushbutton Switches 25mm Pilot Light White | 0 | |||
PMP2425WP![]() | Crydom Inc | Solid State Relays - Industrial Mount 25A 90-280VAC IOP, Elevator Scrw RoHS : Compliant |
| 0 | ||
PMP2450WP![]() | Crydom Inc | Solid State Relays - Industrial Mount 50A 90-280VAC IOP, Elevator Scrw RoHS : Compliant |
| 0 | ||
| LW6MP-24MA | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Amber |
| 0 | ||
| MP24GS | ABB Group | Thomas & Betts | 0 | |||
| S1718MP24NM | TE Connectivity | TE Connectivity | 0 | |||
| LW6MP-24R | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Red |
| 0 | ||
![]() Ameya Holding Limited | MP24833GN-Z | Monolithic Power Systems | MP24833 Series 4.5 - 55 V 3 A 200 kHz White LED Driver - SOIC-8 RoHS : Compliant | 32,874 | ||
| ECLAMP2454P.TCT | Semtech Corporation | ECLAMP2454P Series 12 pF Bi-Directional SMT ESD/EMI Protection - SLP2116P8 RoHS : Compliant | 19,875 | |||
| ECLAMP2458P.TCT | Semtech Corporation | ECLAMP2455P Series 10 V 12 pF ESD-EMI 8-line Protection for Color LCD Interface RoHS : Compliant | 9,562 | |||
| MP2491CGQB-Z | Monolithic Power Systems | RoHS : Compliant | 4,795 | |||
| ECLAMP2456P.TCT | Semtech Corporation | esd bidir emi/rfi filter, 5v RoHS : Compliant | 2,955 | |||
| ECLAMP2410PQTCT | Semtech Corporation | RoHS : Compliant | 2,786 | |||
| MP2459GJ | Monolithic Power Systems | RoHS : Compliant | 1,570 | |||
![]() ComSIT USA | MP2459GJZ | Monolithic Power Systems | AVAILABLE EU | 37,891 | ||
![]() ComSIT USA | RCLAMP2402BTCT | Semtech Corporation | ULTRA-LOW CAPACITANCE TVS FOR ESD AND CDE PROTECTION Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Unidirectional, 2 Element, Silicon RoHS : Compliant | 2,465 | ||
| ECLAMP2410PTCT | Semtech Corporation | ESD PROTECTION DEVICE FOR T-FLASH/MICROSD INTERFACE Trans Voltage Suppressor Diode, 5V V(RWM), Bidirectional, 7 Element, Silicon RoHS : Compliant | 2,115 | |||
| ECLAMP2455KDKR | Semtech Corporation | Electronic Component RoHS : Not Compliant | 985 | |||
| MP2451DTLFZ | Monolithic Power Systems | 36 VOLT, 2MHZ, 0.6 AMP STEP-DOWN CONVERTER Switching Regulator, Current-mode, 0.85A, 2400kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 500 | |||
| HLMP2450CATF | Avago Technologies | LED LIGHT BAR Single Color LED, Yellow, 19.05mm RoHS : Compliant | 240 | |||
![]() Interstate Connecting Components | DRA1-MP240D3 | Crydom Inc | SSR RELAY, DIN RAIL MOUNT 10MM , 280VAC/3A, 3-32VDC IN, ZERO RoHS : Compliant |
| 5 | |
| MP240D3 | Crydom Inc | SSR RELAY, PCB MOUNT SIP, 280V AC/3A, 3-32VDC IN, ZERO CROSS RoHS : Compliant |
| 4 | ||
PMP2425W![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULT IFUNCTION, PANEL MOUNT, 280VAC RoHS : Compliant |
| 2 | ||
| DDMP-24H7S-J-K126 | ITT Interconnect Solutions | DDMP24H7SJK126 | 0 | |||
| G87MP241205CHR | Amphenol Commercial | MINI POWER PLUS CONN, PITCH4.2 | 0 | |||
| G88MP24102MEU | Amphenol Commercial | G88MP24102MEU-P-3.0MM STR DIP | 0 | |||
| G87MP241202PQHR | Amphenol Commercial | G87MP241202PQHR | 0 | |||
| MP24W23G15 | Amphenol Sine Systems |
| 0 | |||
| G88MP24001TEU | Amphenol Commercial | G88MP24001TEU-MICRO PWR PLUS,P | 0 | |||
| DDMP-24C7S-J-A197 | ITT Interconnect Solutions | DDMP24C7SJA197 RoHS : Compliant | 0 | |||
| DDMP-24C7P-J-K127 | ITT Interconnect Solutions | DDMP24C7PJK127 | 0 | |||
| G88MP241020CREU | Amphenol Commercial | MICRO POWER PLUS 3.0MM | 0 | |||
| G87MP241212C1HR | Amphenol Commercial | MINI POWER PLUS 4.2MM | 0 | |||
| G88MP241024A1SRHR | Amphenol Commercial | MICRO POWER PLUS 2X12 VT HEADE | 0 | |||
| DDMP-24H7S-J-A197 | ITT Interconnect Solutions | DDMP24H7SJA197 | 0 | |||
![]() PEI Genesis | DDMMP24C7PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | |
| MP24W23G15 | Amphenol Sine Systems |
| 0 | |||
| DDMMP24H7SJA101H | ITT Interconnect Solutions |
| 0 | |||
| DDMMP24X7PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MP24M23G15 | Amphenol Sine Systems |
| 0 | |||
| DDMP24H7PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MP24W23F | Amphenol Sine Systems |
| 0 | |||
| DDMMP24H7PJ | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DDMP24H7SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MP24M23G30 | Amphenol Sine Systems |
| 0 | |||
| MP24W23G10 | Amphenol Sine Systems |
| 0 | |||
| MP24W23G5 | Amphenol Sine Systems |
| 0 | |||
| DDMMP24X7PN | ITT Interconnect Solutions |
| 0 | |||
| DDMP24X7PJ | ITT Interconnect Solutions |
| 0 | |||
| DDMP24W7PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | MP24W23F | Amphenol Sine Systems | Connector |
| 1,091 | |
| G88MP24102KEU | Amphenol Corporation | Connector RoHS : Compliant |
| 878 | ||
| MP24M23G10 | Amphenol Sine Systems | Connector |
| 322 | ||
| MP24W23G10 | Amphenol Sine Systems | Connector |
| 290 | ||
| G88MP24102MEU | Amphenol Corporation | Connector |
| 257 | ||
| TTMS-MP-2.4-9 | TE Connectivity | Connectors |
| 173 | ||
![]() Chip 1 Exchange | HLMP-2400 | Avago Technologies | INSTOCK RoHS : Compliant | 4,320 | ||
| MP2451DJ-LF-Z | Monolithic Power Systems | INSTOCK RoHS : Compliant | 3,000 | |||
| JT1AS-TMP-24V | Panasonic Electronic Components | INSTOCK | 1,846 | |||
| JT1AS-TMP-24V | INSTOCK | 1,800 | ||||
| MP2459GJ-Z | Monolithic Power Systems | INSTOCK RoHS : Compliant | 520 | |||
![]() Avnet Abacus | MP24M23F | Amphenol Corporation | (Alt: MP24M23F) RoHS : Compliant | 3,500 | ||
| MP245 | CTS Corporation | Crystal 24576MHz Series 2Pin HC49US Bulk (Alt: MP245) RoHS : Compliant | 0 | |||
| MP245B | CTS Corporation | (Alt: MP245B) RoHS : Compliant | 0 | |||
| MP240B | CTS Corporation | (Alt: MP240B) RoHS : Compliant | 0 | |||
| MP245-E | CTS Corporation | (Alt: MP245-E) RoHS : Compliant | 0 | |||
| MP245B-E | CTS Corporation | (Alt: MP245B-E) RoHS : Compliant | 0 | |||
| MP240A-E | CTS Corporation | (Alt: MP240A-E) RoHS : Compliant | 0 | |||
| MP24W23F | Amphenol Corporation | Pin Contact Machined Gold Flash Wire Range 1325mm 2624 AWG (Alt: MP24W23F) RoHS : Compliant | 0 | |||
| MP240B-E | CTS Corporation | (Alt: MP240B-E) RoHS : Compliant | 0 | |||
| MP24M23G15 | Amphenol Corporation | (Alt: MP24M23G15) RoHS : Compliant | 0 | |||
| MP24M23G30 | Amphenol Corporation | (Alt: MP24M23G30) RoHS : Compliant | 0 | |||
| JM1ANTMP24FT | Panasonic Electronic Components | PowerRelay 1FormA Single side stable TMP Slim type (Alt: JM1ANTMP24FT) RoHS : Compliant | 0 | |||
| JTV1ASTMP24T | Panasonic Electronic Components | Electromechanical Relay SPSTNO 30A 24VDC 576Ohm Top Mount (Alt: JTV1ASTMP24T) RoHS : Compliant | 0 | |||
| JM1ANZTMP24FT | Panasonic Electronic Components | PowerRelay 1FormA Single side stable TMP Flat type (Alt: JM1ANZTMP24FT) RoHS : Compliant | 0 | |||
| DL CRIMP 24-26 50AU(T)NOBUMP | ITT Interconnect Solutions | Rectangular Power Contact ITT Cannon DL Gold Plated Contacts Copper Socket Crimp 26 AWG (Alt: 030-2492-001) RoHS : Compliant | 0 | |||
![]() Avnet Asia | UCLAMP2401T.TCT![]() | Semtech Corporation | (Alt: UCLAMP2401T.TCT) RoHS : Compliant |
| 0 | |
| G87MP241212C5HR | Amphenol Corporation | (Alt: G87MP241212C5HR) RoHS : Compliant | 0 | |||
RCLAMP2402B.TCT![]() | Semtech Corporation | (Alt: RCLAMP2402B.TCT) RoHS : Compliant | 0 | |||
| G87MP242515THR | Amphenol Corporation | (Alt: G87MP242515THR) RoHS : Compliant | 0 | |||
| G88MP241024A1SRHR | Amphenol Corporation | (Alt: G88MP241024A1SRHR) RoHS : Compliant | 0 | |||
| G87MP241202PHR | Amphenol Corporation | (Alt: G87MP241202PHR) RoHS : Compliant | 0 | |||
| G87MP242205THR | Amphenol Corporation | (Alt: G87MP242205THR) RoHS : Compliant | 0 | |||
| G88MP241324CR5EU | Amphenol Corporation | (Alt: G88MP241324CR5EU) RoHS : Compliant | 0 | |||
| G88MP24025C1HR | Amphenol Corporation | (Alt: G88MP24025C1HR) RoHS : Compliant | 0 | |||
| G88MP24102CEU | Amphenol Corporation | (Alt: G88MP24102CEU) RoHS : Compliant | 0 | |||
| G87MP242202THR | Amphenol Corporation | (Alt: G87MP242202THR) RoHS : Compliant | 0 | |||
| G88MP241020DREU | Amphenol Corporation | (Alt: G88MP241020DREU) RoHS : Compliant | 0 | |||
| ECLAMP2410PQTCT | Semtech Corporation | EMI Filter with Integrated ESD Protection 12pF 40dB 5V Flat Style SMD 16-Pin SLP4016P16 T/R (Alt: ECLAMP2410PQTCT) RoHS : Compliant | 0 | |||
| ECLAMP2455P.TCT | Semtech Corporation | EMI Filter Flat Style SMD T/R (Alt: ECLAMP2455P.TCT) RoHS : Compliant | 0 | |||
![]() Avnet Silica | ECLAMP2457K.C | Semtech Corporation | ESDEMI 4line Protection (Alt: ECLAMP2457K.C) RoHS : Compliant | 90,000 | ||
| MP24895-AGH-Z | Monolithic Power Systems | (Alt: MP24895-AGH-Z) RoHS : Compliant | 85,000 | |||
| MP2454GQ-P | Monolithic Power Systems | (Alt: MP2454GQ-P) RoHS : Compliant | 0 | |||
| MP2460GJ-Z | Monolithic Power Systems | DCDC Switching Synchronous Buck Regulator Adjustable 45V45V 08V441V06A TSOT236 (Alt: MP2460GJ-Z) RoHS : Compliant | 0 | |||
| MP2454GH-Z | Monolithic Power Systems | (Alt: MP2454GH-Z) RoHS : Compliant | 0 | |||
| MP24894GJ-P | Monolithic Power Systems | (Alt: MP24894GJ-P) RoHS : Compliant | 0 | |||
| MP2491NGQB-Z | Monolithic Power Systems | Converter DC to DC Single Step Down 4V to 32V 13Pin QFN TR (Alt: MP2491NGQB-Z) RoHS : Compliant | 0 | |||
| MP2410AGJE-P | Monolithic Power Systems | (Alt: MP2410AGJE-P) RoHS : Compliant | 0 | |||
| MP24833-AGN-Z | Monolithic Power Systems | (Alt: MP24833-AGN-Z) RoHS : Compliant | 0 | |||
MP2490DQ-LF-Z![]() | Monolithic Power Systems | Conv DCDC Single Step Down 45V to 36V 10Pin QFN EP TR (Alt: MP2490DQ-LF-Z) RoHS : Compliant | 0 | |||
MP2467DN-LF-Z![]() | Monolithic Power Systems | Conv DCDC Single Step Down 6V to 36V 8Pin SOIC N EP TR (Alt: MP2467DN-LF-Z) RoHS : Compliant | 0 | |||
| MP24830HL-LF-Z | Monolithic Power Systems | LED Driver BuckBoost 1CH 1 LEDs AnalogPWM 14Pin QFN TR (Alt: MP24830HL-LF-Z) RoHS : Compliant | 0 | |||
| MP24893DQ-LF-Z | Monolithic Power Systems | (Alt: MP24893DQ-LF-Z) RoHS : Compliant | 0 | |||
UCLAMP2401T.TCT![]() | Semtech Corporation | Diode TVS Single UniDir 24V 150W 2Pin SLP TR (Alt: UCLAMP2401T.TCT) RoHS : Compliant | 0 | |||
| MP2489DQ-AEC1-LF-Z | Monolithic Power Systems | MPSMP2489DQAEC1LFZ (Alt: MP2489DQ-AEC1-LF-Z) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WDMP.2458.A | Taoglas Antenna Solutions | WDMP.2458.A Wi-Fi Including Wi-Fi 6 Mechanical Patch Antenna |
| 0 | |
![]() Chip-Germany GmbH | MP246STGBU | MPE-Garry GmbH | 116 | |||
| MP243STGB | MPE-Garry GmbH | 30 | ||||
![]() Component Electronics, Inc | MP2481DH-LF-Z![]() | Monolithic Power Systems | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,183 | |
| SIMP241D | FECS | IN STOCK SHIP TODAY | 300 | |||
| MP245 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 187 | ||
| HLMP-2400 | IN STOCK SHIP TODAY |
| 23 | |||
| MMP24C-2212P1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 20 | |||
| HLMP-2400 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| HLMP-2400 | QT Optoelectronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
![]() EBV Elektronik | HLMP-2400-EF000 | Broadcom Limited | (Alt: HLMP-2400-EF000) RoHS : Compliant | 3,840 | ||
| HLMP-2400 | Broadcom Limited | LED Bar Graph Array Yellow 20 mA 21 V 20 mcd 2 LEDs 889mm x 381mm (Alt: HLMP-2400) RoHS : Compliant | 2,880 | |||
| HLMP-2450 | Broadcom Limited | LED Bar Graph Array Yellow 20 mA 21 V 38 mcd 4 LEDs 1905mm x 381mm (Alt: HLMP-2450) RoHS : Compliant | 0 | |||
| SMP24A-M3/84A | Vishay Intertechnologies | 400W24V 5UNIDIRSMP TVS (Alt: SMP24A-M3/84A) RoHS : Compliant | 0 | |||
| TPSMP24AHM3_A/I | Vishay Intertechnologies | (Alt: TPSMP24AHM3_A/I) RoHS : Compliant | 0 | |||
| HLMP-2450-EF000 | Broadcom Limited | (Alt: HLMP-2450-EF000) RoHS : Compliant | 0 | |||
![]() Master Electronics | PMP2425W![]() | Crydom Inc | Solid State Relay - 0-5 VDC 0-10 VDC 4-20 mA Analog Control Signal - 25 A Maximum Load Current - 90-280 VAC Operating Voltage Range - LED Status Indicator - Panel Mount. RoHS : Compliant |
| 83 | |
| MP240D3 | Crydom Inc | Solid State Relay - 3-32 VDC Control Voltage Range - 3 A Maximum Load Current - 24-280 VAC Operating Voltage Range - Normally Open Output Function - PCB Mounting. RoHS : Compliant |
| 28 | ||
| SSRMP-240D10R | TE Connectivity | Solid State Relay - SPST-NO (1 Form A) - 4 to 32VDC Input - 10A 24 to 280V Load - Quick Connect 0.250 (6.3mm) - Mini Puck Package - Panel Mount. RoHS : Compliant |
| 24 | ||
| DRA1-MP240D3 | Crydom Inc | DRA1 MP Series -10mm Single Channel DIN Rail Mount SSR Assembly - Control Voltage 3-32 VDC - Typical Input Current 2.6 mADC - Output 24-280 VAC - Max Load Current 3 A - LED Status Indicator RoHS : Compliant |
| 19 | ||
PMP2425WP![]() | Crydom Inc | Solid State Relay - 0-5 VDC 0-10 VDC 4-20 mA Analog Control Signal - 25 A Maximum Load Current - 90-280 VAC Operating Voltage Range - LED Status Indicator - Overvoltage Protection - Panel Mount. RoHS : Compliant |
| 18 | ||
PMP2450WPH![]() | Crydom Inc | Proportional Control SSR - Output Voltage: 90-280VAC - 50A - Supply Voltage: 8-30VDC - Overvoltage Protection - Thermal Pad RoHS : Compliant |
| 10 | ||
PMP2450WP![]() | Crydom Inc | Solid State Relay - 0-5 VDC 0-10 VDC 4-20 mA Analog Control Signal - 50 A Maximum Load Current - 90-280 VAC Operating Voltage Range - LED Status Indicator - Overvoltage Protection - Panel Mount. RoHS : Compliant |
| 10 | ||
PMP2425WPH![]() | Crydom Inc | Solid State Relay - 0-5 VDC 0-10 VDC 4-20 mA Analog Control Signal - 25 A Maximum Load Current - 90-280 VAC Operating Voltage Range - LED Status Indicator - Overvoltage Protection - Thermal Pad - Panel Mount. RoHS : Compliant |
| 9 | ||
| DDMP-24H7S-J-K126 | ITT Interconnect Solutions | Conn D-Subminiature SKT 7Power/17Signal POS Solder RA Thru-Hole 24 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| G88MP24102MEU | Amphenol Communications Solutions | G88MP24102MEU-P-3.0MM STR DIP RoHS : Compliant |
| 0 | ||
| LW6MP-24S | IDEC Corporation | 25MM PILOT LIGHT BLUE RoHS : Compliant |
| 0 | ||
| LW6MP-24Y | IDEC Corporation | 25MM PILOT LIGHT YELLOW RoHS : Compliant |
| 0 | ||
| LW6MP-24W | IDEC Corporation | 25MM PILOT LIGHT WHITE RoHS : Compliant |
| 0 | ||
| DDMP-24C7S-J-A197 | ITT Interconnect Solutions | DDMP-24C7S-J-A197; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| DDMP-24C7P-J-K127 | ITT Interconnect Solutions | DDMP-24C7P-J-K127; D Sub; D Sub RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3MP2445 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002 Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002 cable. | 210 | ||
| PE3MP2415-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02003 Twinax 60" Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 60" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2415-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2415-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2415-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 60" cable. |
| 50 | ||
| PE3MP2415-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02003 Twinax 36" Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2415-36 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2415-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2415-36 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 36" cable. |
| 50 | ||
| PE3MP2415-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02003 Twinax 48" Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2415-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2415-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2415-48 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02003 twinax 48" cable. |
| 50 | ||
| PE3MP2445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 12" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-12 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable. |
| 42 | ||
| PE3MP2445-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 60" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-60 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-60 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 60" cable. |
| 42 | ||
| PE3MP2411-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 12" Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 12" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411-12 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 12" cable. |
| 42 | ||
| PE3MP2411-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 36" Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411-36 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411-36 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411-36 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 36" cable. |
| 28 | ||
| PE3MP2411-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 48" Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411-48 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 48" cable. |
| 21 | ||
| PE3MP2414 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02001 Twinax Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2414 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2414 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2414 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax cable. | 5 | |||
| PE3MP2442-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRB 3-Lug Jack with Blunt Cut for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2442-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2442-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2442-60 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 60" cable. |
| 5 | ||
| PE3MP2456-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 36" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-36 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-36 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 36" cable. |
| 4 | ||
| PE3MP2456-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-60 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-60 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 60" cable. |
| 4 | ||
| PE3MP2456-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 24" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-24 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-24 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 24" cable. |
| 4 | ||
| PE3MP2414-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02001 Twinax 48" Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2414-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2414-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2414-48 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 48" cable. |
| 1 | ||
![]() Vyrian | MP24895GJ-Z![]() | Monolithic Power Systems | LED Driver, 2-Segment, PDSO5 RoHS : Compliant | 16,466 | ||
| MP24830HL-LF-Z | Monolithic Power Systems | LED Driver, 1-Segment RoHS : Compliant | 11,358 | |||
| MP2410AGJE-Z | Monolithic Power Systems | LED Driver, 3-Segment, PDSO8 RoHS : Compliant | 10,006 | |||
MP2489DJ-LF-Z![]() | Monolithic Power Systems | LED Driver, 1-Segment, PDSO5 RoHS : Compliant | 9,660 | |||
| MP2451DJ-LF-Z | Monolithic Power Systems | Switching Regulator, Current-mode, 2000kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 8,824 | |||
| HLMP-2400 | Broadcom Limited | RoHS : Compliant | 7,949 | |||
| MP24833-AGN-Z | Monolithic Power Systems | LED Driver, 2-Segment, PDSO8 RoHS : Compliant | 7,924 | |||
| PMP2490 | Texas Instruments | 7,411 | ||||
| HLMP-2450 | Broadcom Limited | RoHS : Compliant | 7,286 | |||
| BCM5805KQM-P24 | Broadcom Limited | 5,150 | ||||
| HLMP2450CATE | Broadcom Limited | 4,414 | ||||
| PMP2493.4 | Texas Instruments | 3,440 | ||||
| PMP2445 | Texas Instruments | 3,357 | ||||
| HLMP-2450-EF000 | Broadcom Limited | RoHS : Compliant | 3,316 | |||
| ECLAMP2422N.TCT | Semtech Corporation | Data Line Filter, 2 Function(s), 5V, 6 Pin(s), Plastic RoHS : Compliant | 639 | |||
![]() Win Source Electronics | MP2451DJ-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 600MA TSOT23-6 RoHS : Compliant |
| 84,144 | |
| MP2451DT-LF-P | Monolithic Power Systems | IC REG BUCK ADJ 600MA SOT23-6 |
| 57,520 | ||
| MP2410AGJ-P | Monolithic Power Systems | IC LED DRV RGLTR PWM 2A TSOT23-6 |
| 40,950 | ||
| MP2491CGQB-Z | Monolithic Power Systems | IC REG BUCK ADJ 6A 13QFN RoHS : Compliant |
| 40,000 | ||
MP2467DN-LF![]() | Monolithic Power Systems | IC REG BUCK ADJ 2.5A 8SOICE RoHS : Compliant |
| 35,000 | ||
MP2467DN-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 2.5A 8SOICE RoHS : Compliant |
| 30,000 | ||
| MP24833-AGN-Z | Monolithic Power Systems | IC LED DRIVER RGLTR PWM 3A 8SOIC RoHS : Compliant |
| 28,458 | ||
| MP2460GJ-Z | Monolithic Power Systems | IC REG BUCK ADJ 600MA TSOT23-6 RoHS : Compliant |
| 25,790 | ||
| MP2497GN-A-Z | Monolithic Power Systems | IC REG BUCK ADJ 3A 8SOICE RoHS : Compliant |
| 25,000 | ||
MP2403DN-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 3A 8SOIC RoHS : Compliant |
| 22,880 | ||
MP2452DD-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 1A / Conv DC-DC 3.3V to 36V Step Down Single-Out 0.794V to 33V 1A Automotive 8-Pin QFN EP T/R RoHS : Compliant |
| 19,995 | ||
MP2482DN-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 5A 8SOICE RoHS : Compliant |
| 10,493 | ||
| ECLAMP2465T.TCT | Semtech Corporation | FILTER RC(PI) ESD SMD RoHS : Compliant |
| 6,000 | ||
MP2495DS-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 2A 16SOIC RoHS : Compliant |
| 3,100 | ||
MP2489DJ-LF-Z![]() | Monolithic Power Systems | IC LED DRIVER / LED Driver 12 Segment Automotive 5-Pin TSOT-23 T/R RoHS : Compliant |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |