MCL2601 Price, Distributor, Stock

Power PWH Plastic 25A 05 pins Female Connector Male Contact Straight 2 Points Lock Crimp Field Installable Φ13.0 - Φ16.0mm IP68 Mated
RoHS : Compliant

100 : $14.06
75 : $14.35
50 : $18.12
25 : $29.45
10 : $29.52
5 : $29.6

MCL1005-9R1-R

Eaton Bussmann

MCL Chip IND 1005 9.1nH 2 Pads
RoHS : Compliant

500,000 : $0.0285
250,000 : $0.0293
150,000 : $0.0295
100,000 : $0.0296
50,000 : $0.0305
30,000 : $0.0315
10,000 : $0.0327

MCL2012V2-1R8-R

Eaton Bussmann

MCL Chip IND 2012 1.8nH 2 Pads
RoHS : Compliant

500,000 : $0.021
252,000 : $0.0211
152,000 : $0.0219
100,000 : $0.0219
52,000 : $0.0225
28,000 : $0.0232
12,000 : $0.0242
4,000 : $0.0258

MCLA1005V2-4R7-R

Eaton Bussmann

MCLA Auto Chip IND 1005 4.7nH 2 Pads
RoHS : Compliant

500,000 : $0.0155
250,000 : $0.0159
150,000 : $0.0162
100,000 : $0.0164
50,000 : $0.0169
30,000 : $0.0172
10,000 : $0.0178

MCL1608V1-R12-R

Eaton Bussmann

Chip Inductor 1.6x0.8x0.8mm 0.12uH Reel of 4000 | Eaton Electronics MCL1608V1-R12-R
RoHS : Compliant

500,000 : $0.0437
252,000 : $0.0439
152,000 : $0.044
100,000 : $0.0441
52,000 : $0.0442
28,000 : $0.0443
8,000 : $0.0468
4,000 : $0.0495

MCL2012V1-R056-R

Eaton Bussmann

Multilayer Inductor 56 nH 150 Milliohm A± 20% 320 MHz 350 mA 0805 [2012 Metric]
RoHS : Compliant

252,000 : $0.0367
152,000 : $0.0368
100,000 : $0.0368
52,000 : $0.0384
28,000 : $0.0394
12,000 : $0.0406
8,000 : $0.0423
4,000 : $0.0424

MCL2012V1-R100-R

Eaton Bussmann

Chip Inductor 2x1.2x0.9mm 0.10uH Reel of 4000 | Eaton Electronics MCL2012V1-R100-R
RoHS : Compliant

252,000 : $0.0441
152,000 : $0.0442
100,000 : $0.0443
52,000 : $0.0444
28,000 : $0.0447
12,000 : $0.0477
8,000 : $0.0502
4,000 : $0.056

MCL2012V1-R470-R

Eaton Bussmann

Chip Inductor 2x1.2x0.9mm 0.47uH Reel of 4000 | Eaton Electronics MCL2012V1-R470-R
RoHS : Compliant

252,000 : $0.0448
152,000 : $0.045
100,000 : $0.0451
52,000 : $0.0452
28,000 : $0.0453
12,000 : $0.0486
8,000 : $0.0527
4,000 : $0.0591

IH-PMC-LED-002

Honeywell Sensing and Control

PM 2.5 LED SENSOR
RoHS : Compliant

250 : $19.49
100 : $20.03
50 : $23.2
25 : $24.24
10 : $24.98
5 : $26.19
1 : $28.0

FTP-637MCL411-RE

FCL Components Limited

24V 3INCH MECHANISM WITH
RoHS : Compliant

100 : $56.91
75 : $58.06
50 : $82.51
25 : $155.86
10 : $156.24
5 : $156.63
2 : $157.03

MSTB-2-5/-6-ST-BDMC:L-C-R

Phoenix Contact

MSTB 2 5/ 6-ST BDMC:L C R
RoHS : Compliant

7,500 : $3.36
5,000 : $3.37
2,500 : $3.41
1,000 : $3.45
500 : $3.55
250 : $3.64
100 : $3.8
50 : $4.03

Pasternack Enterprises US

TCP-240-716MC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-240, Interface Type 2: TCOM-240-FR, Interface Type 3: LMR-240, Interface Type 4: LMR-240-DB, Interface Type 5: LMR-240-FR, Interface Type 6: LMR-240-UF, Interface Type 7: LMR-LW240, Interface Type 8: PE-C240. 7/16 DIN Male Low PIM Connector Clamp/Solder Attachment for TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF. TCP-240-716MC-LP 7/16 DIN male coaxial connector has an interface type of 7/16 DIN male which is compatible with TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240 and PE-C240 cables and has an impedance of 50 Ohms. Pasternack's 7/16 DIN male connector uses clamp/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 7/16 DIN male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TCP-240-716MC-LP 7/16 DIN connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-240-716MC-LP features a 80 µin minimum body plating specification. The TCP-240-716MC-LP 7/16 DIN low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 7/16 DIN coaxial RF connector has a maximum insertion loss of 0.245 dB. This 7/16 DIN connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 7/16 DIN male connector has a length of 1.781 inches, a width of 1.26 inches, and a weight of 0.13 lbs. This Pasternack low PIM male 7/16 DIN connector will ship the same business day as purchased. Our 7/16 DIN male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $56.61
5 : $55.48
10 : $54.35
25 : $53.21

TCP-240-4310MC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-240, Interface Type 2: TCOM-240-FR, Interface Type 3: LMR-240, Interface Type 4: LMR-240-DB, Interface Type 5: LMR-240-FR, Interface Type 6: LMR-240-UF, Interface Type 7: LMR-LW240, Interface Type 8: PE-C240. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240. TCP-240-4310MC-LP 4.3-10 male coaxial connector has an interface type of 4.3-10 male which is compatible with TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240 and PE-C240 cables and has an impedance of 50 Ohms. Pasternack's 4.3-10 male connector uses clamp/solder as an attachment method. Our male 4.3-10 coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 4.3-10 male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 4.3-10 male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TCP-240-4310MC-LP 4.3-10 connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-240-4310MC-LP features a 100 µin minimum body plating specification. The TCP-240-4310MC-LP 4.3-10 low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 4.3-10 coaxial RF connector has a maximum insertion loss of 0.245 dB. This 4.3-10 connector has a silver inner contact plating. The Pasternack low PIM 4.3-10 male connector has a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. It also consists of a brass retaining ring that meets silver compliance. Our 4.3-10 male connector has a length of 1.51 inches, a width of 0.866 inches, and a weight of 0.11 lbs. This Pasternack low PIM male 4.3-10 connector will ship the same business day as purchased. Our 4.3-10 male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $45.69
5 : $44.78
10 : $43.86
25 : $42.95

TCP-400-716MC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-400, Interface Type 2: TCOM-400-FR, Interface Type 3: LMR-400, Interface Type 4: LMR-400-DB, Interface Type 5: LMR-400-FR, Interface Type 6: LMR-400-UF, Interface Type 7: LMR-LW400, Interface Type 8: PE-C400, Interface Type 9: PE-B400, Interface Type 10: PE-B405. 7/16 DIN Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF. TCP-400-716MC-LP 7/16 DIN male coaxial connector has an interface type of 7/16 DIN male which is compatible with TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400, PE-C400, PE-B400 and PE-B405 cables and has an impedance of 50 Ohms. Pasternack's 7/16 DIN male connector uses clamp/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 7/16 DIN male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TCP-400-716MC-LP 7/16 DIN connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-400-716MC-LP features a 80 µin minimum body plating specification. The TCP-400-716MC-LP 7/16 DIN low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 7/16 DIN coaxial RF connector has a maximum insertion loss of 0.245 dB. This 7/16 DIN connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 7/16 DIN male connector has a length of 1.758 inches, a width of 1.26 inches, and a weight of 0.14 lbs. This Pasternack low PIM male 7/16 DIN connector will ship the same business day as purchased. Our 7/16 DIN male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $100.37
5 : $98.36
10 : $96.36
25 : $94.35

TCP-400-NMC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-400, Interface Type 2: TCOM-400-FR, Interface Type 3: LMR-400, Interface Type 4: LMR-400-DB, Interface Type 5: LMR-400-FR, Interface Type 6: LMR-400-UF, Interface Type 7: LMR-LW400, Interface Type 8: PE-C400, Interface Type 9: PE-B400, Interface Type 10: PE-B405. N Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400. TCP-400-NMC-LP type N male coaxial connector has an interface type of type N male which is compatible with TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400, PE-C400, PE-B400 and PE-B405 cables and has an impedance of 50 Ohms. Pasternack's type N male connector uses clamp/solder as an attachment method. Our male type N coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's type N coaxial connector has a brass body with tri-metal plating. Our TCP-400-NMC-LP type N connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-400-NMC-LP features a 80 µin minimum body plating specification. The TCP-400-NMC-LP type N low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male type N coaxial RF connector has a maximum insertion loss of 0.245 dB. This type N connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our type N male connector has a length of 1.703 inches, a width of 0.748 inches, and a weight of 0.1 lbs. This Pasternack low PIM male type N connector will ship the same business day as purchased. Our type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $43.7
5 : $42.83
10 : $41.95
25 : $41.08

TCP-600-4310MC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-600, Interface Type 2: TCOM-600-FR, Interface Type 3: LMR-600, Interface Type 4: LMR-600-DB, Interface Type 5: LMR-600-FR, Interface Type 6: LMR-600-UF, Interface Type 7: LMR-LW600, Interface Type 8: PE-C600. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF. TCP-600-4310MC-LP 4.3-10 male coaxial connector has an interface type of 4.3-10 male which is compatible with TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600 and PE-C600 cables and has an impedance of 50 Ohms. Pasternack's 4.3-10 male connector uses clamp/solder as an attachment method. Our male 4.3-10 coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 4.3-10 male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 4.3-10 male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TCP-600-4310MC-LP 4.3-10 connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-600-4310MC-LP features a 80 µin minimum body plating specification. The TCP-600-4310MC-LP 4.3-10 low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 4.3-10 coaxial RF connector has a maximum insertion loss of 0.245 dB. This 4.3-10 connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 4.3-10 male connector has a length of 1.789 inches, a width of 0.866 inches, and a weight of 0.27 lbs. This Pasternack low PIM male 4.3-10 connector will ship the same business day as purchased. Our 4.3-10 male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $60.33
5 : $59.12
10 : $57.92
25 : $56.71

TCP-400-4310MC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-400, Interface Type 2: TCOM-400-FR, Interface Type 3: LMR-400, Interface Type 4: LMR-400-DB, Interface Type 5: LMR-400-FR, Interface Type 6: LMR-400-UF, Interface Type 7: LMR-LW400, Interface Type 8: PE-C400, Interface Type 9: PE-B400, Interface Type 10: PE-B405. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF. TCP-400-4310MC-LP 4.3-10 male coaxial connector has an interface type of 4.3-10 male which is compatible with TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400, PE-C400, PE-B400 and PE-B405 cables and has an impedance of 50 Ohms. Pasternack's 4.3-10 male connector uses clamp/solder as an attachment method. Our male 4.3-10 coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 4.3-10 male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 4.3-10 male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TCP-400-4310MC-LP 4.3-10 connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-400-4310MC-LP features a 80 µin minimum body plating specification. The TCP-400-4310MC-LP 4.3-10 low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 4.3-10 coaxial RF connector has a maximum insertion loss of 0.245 dB. This 4.3-10 connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 4.3-10 male connector has a length of 1.632 inches, a width of 0.866 inches, and a weight of 0.12 lbs. This Pasternack low PIM male 4.3-10 connector will ship the same business day as purchased. Our 4.3-10 male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $49.82
5 : $48.82
10 : $47.83
25 : $46.83

TCP-240-NMC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-240, Interface Type 2: TCOM-240-FR, Interface Type 3: LMR-240, Interface Type 4: LMR-240-DB, Interface Type 5: LMR-240-FR, Interface Type 6: LMR-240-UF, Interface Type 7: LMR-LW240, Interface Type 8: PE-C240. N Male Low PIM Connector Clamp/Solder Attachment for TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240. TCP-240-NMC-LP type N male coaxial connector has an interface type of type N male which is compatible with TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240 and PE-C240 cables and has an impedance of 50 Ohms. Pasternack's type N male connector uses clamp/solder as an attachment method. Our male type N coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's type N coaxial connector has a brass body with tri-metal plating. Our TCP-240-NMC-LP type N connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-240-NMC-LP features a 100 µin minimum body plating specification. The TCP-240-NMC-LP type N low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male type N coaxial RF connector has a maximum insertion loss of 0.245 dB. This type N connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our type N male connector has a length of 1.545 inches, a width of 0.748 inches, and a weight of 0.09 lbs. This Pasternack low PIM male type N connector will ship the same business day as purchased. Our type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $43.7
5 : $42.83
10 : $41.95
25 : $41.08

TCP-600-716MC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-600, Interface Type 2: TCOM-600-FR, Interface Type 3: LMR-600, Interface Type 4: LMR-600-DB, Interface Type 5: LMR-600-FR, Interface Type 6: LMR-600-UF, Interface Type 7: LMR-LW600, Interface Type 8: PE-C600. 7/16 DIN Male Low PIM Connector Clamp/Solder Attachment for TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF. TCP-600-716MC-LP 7/16 DIN male coaxial connector has an interface type of 7/16 DIN male which is compatible with TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600 and PE-C600 cables and has an impedance of 50 Ohms. Pasternack's 7/16 DIN male connector uses clamp/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 7/16 DIN male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TCP-600-716MC-LP 7/16 DIN connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-600-716MC-LP features a 80 µin minimum body plating specification. The TCP-600-716MC-LP 7/16 DIN low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 7/16 DIN coaxial RF connector has a maximum insertion loss of 0.245 dB. This 7/16 DIN connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 7/16 DIN male connector has a length of 1.783 inches, a width of 1.26 inches, and a weight of 0.2 lbs. This Pasternack low PIM male 7/16 DIN connector will ship the same business day as purchased. Our 7/16 DIN male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $67.42
5 : $66.07
10 : $64.72
25 : $63.37

TCP-600-NMC-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-600, Interface Type 2: TCOM-600-FR, Interface Type 3: LMR-600, Interface Type 4: LMR-600-DB, Interface Type 5: LMR-600-FR, Interface Type 6: LMR-600-UF, Interface Type 7: LMR-LW600, Interface Type 8: PE-C600. N Male Low PIM Connector Clamp/Solder Attachment for TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600. TCP-600-NMC-LP type N male coaxial connector has an interface type of type N male which is compatible with TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600 and PE-C600 cables and has an impedance of 50 Ohms. Pasternack's type N male connector uses clamp/solder as an attachment method. Our male type N coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's type N coaxial connector has a brass body with tri-metal plating. Our TCP-600-NMC-LP type N connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-600-NMC-LP features a 80 µin minimum body plating specification. The TCP-600-NMC-LP type N low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male type N coaxial RF connector has a maximum insertion loss of 0.245 dB. This type N connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our type N male connector has a length of 1.902 inches, a width of 0.961 inches, and a weight of 0.26 lbs. This Pasternack low PIM male type N connector will ship the same business day as purchased. Our type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $100.52
5 : $98.51
10 : $96.5
25 : $94.49

Venkel Ltd.

MCL0606FRGB4T

VENKEL LTD

Multi-Color LED;0606;Flat Lens;RGB
RoHS : Compliant

29,131

MCL0805FRGB1T

VENKEL LTD

Multi-Color LED;0805;Flat Lens;RGB
RoHS : Compliant

8,000

MCL0606FYW1RD1T

VENKEL LTD

Multi-Color LED;0606;Flat Lens;Yellow;Red
RoHS : Compliant

4,000

MCL1210FRGB1T

VENKEL LTD

Multi-Color LED;1210;Flat Lens;RGB
RoHS : Compliant

MCL1411FRGB1T-LF

VENKEL LTD

Multi-Color LED;1411;Flat Lens;RGB;Lead Frame
RoHS : Compliant

MCL1204RRGB1T

VENKEL LTD

Multi-Color LED;1204;Right Angle Lens;RGB
RoHS : Compliant

MCL0805FBL2RD2T

VENKEL LTD

Multi-Color LED;0805;Flat Lens;Blue;Red
RoHS : Compliant

MCL0606FRGB3T

VENKEL LTD

Multi-Color LED;0606;Flat Lens;RGB
RoHS : Compliant

MCL1204DRGB1T

VENKEL LTD

Multi-Color LED;1204;Dome Lens;RGB
RoHS : Not Compliant

MCL0606FRGB2T

VENKEL LTD

Multi-Color LED;0606;Flat Lens;RGB
RoHS : Compliant

MCL0805FBL1GR1T

VENKEL LTD

Multi-Color LED;0805;Flat Lens;Blue;Green
RoHS : Compliant

MCL0805FRD1BL1T

VENKEL LTD

Multi-Color LED;0805;Flat Lens;Red;Blue
RoHS : Compliant

MCLA30RRD1GR1B

VENKEL LTD

3.0mm Round Red; Green LED Array
RoHS : Not Compliant

MCL0606FBL1RD1T

VENKEL LTD

Multi-Color LED;0606;Flat Lens;Blue;Red
RoHS : Compliant

MCL0606FRD1GR1T

VENKEL LTD

Multi-Color LED;0606;Flat Lens;Red;Green(Yellow Green)
RoHS : Compliant

Vyrian

PCH1J560MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Surface Mount, 3333
RoHS : Compliant

17,514

UWX0G331MCL1GB

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 4V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
RoHS : Compliant

13,551

UWD1A102MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
RoHS : Compliant

13,356

UZG0J330MCL1GB

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 2121
RoHS : Compliant

12,643

PCV1D331MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 20V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
RoHS : Compliant

12,424

UCB1V220MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 2626
RoHS : Compliant

12,289

PCG0J151MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2121
RoHS : Compliant

10,120

UCL1A151MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2626
RoHS : Compliant

9,158

P4802ACMCL

Littelfuse Inc

SIDAC
RoHS : Compliant

9,143

UUD1H330MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 2626
RoHS : Compliant

8,344

P0084UCMCLTP

Littelfuse Inc

Thyristor Surge Protector
RoHS : Compliant

8,318

P0720ECMCLRP1

Littelfuse Inc

Thyristor Surge Protector, 88V V(BO) Max, 30A
RoHS : Compliant

8,064

PCR1E471MCL1GS

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
RoHS : Compliant

6,532

P0300ECMCLAP

Littelfuse Inc

Thyristor Surge Protector, 40V V(BO) Max, 30A
RoHS : Compliant

5,861

P0720ECMCLAP

Littelfuse Inc

Thyristor Surge Protector, 88V V(BO) Max, 30A
RoHS : Compliant

5,040

MCL2601 Distributor

Link URL