| Electronic Components Datasheet Search |
|
LP1019 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | CLP-102-02-L-D-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD RoHS : Compliant |
| 2,023 | |
| CLP-102-02-L-D-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD RoHS : Compliant |
| 2,023 | ||
| CLP-102-02-L-D-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD RoHS : Compliant |
| 2,023 | ||
| CLP-106-02-F-D-TR | Samtec Inc | CONN RCPT 12POS 0.05 GOLD SMD RoHS : Compliant |
| 1,552 | ||
| CLP-106-02-F-D-TR | Samtec Inc | CONN RCPT 12POS 0.05 GOLD SMD RoHS : Compliant |
| 1,552 | ||
| CLP-106-02-F-D-TR | Samtec Inc | CONN RCPT 12POS 0.05 GOLD SMD RoHS : Compliant |
| 1,552 | ||
| CLP-102-02-L-DH-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD R/A RoHS : Compliant |
| 1,390 | ||
| CLP-102-02-L-DH-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD R/A RoHS : Compliant |
| 1,390 | ||
| CLP-102-02-L-DH-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD R/A RoHS : Compliant |
| 1,390 | ||
| CLP-105-02-G-D-K-TR | Samtec Inc | CONN RCPT 10POS 0.05 GOLD SMD RoHS : Compliant |
| 325 | ||
| CLP-105-02-G-D-K-TR | Samtec Inc | CONN RCPT 10POS 0.05 GOLD SMD RoHS : Compliant |
| 325 | ||
| CLP-105-02-G-D-K-TR | Samtec Inc | CONN RCPT 10POS 0.05 GOLD SMD RoHS : Compliant |
| 325 | ||
| LP10 | Sper Scientific | LP10 | Laser Power Meter |
| 39 | ||
| CPQA3218LP-100MC | Shenzhen Kedajia Electronics Co Ltd | FIXED IND 10UH 48A 1.7 MOHM TH |
| 24 | ||
| LP10 | Altech Corporation | LEGENDPLATE 30 MM HAND |
| 0 | ||
![]() Avnet Americas | CLP-105-02-F-D-A-K-TR | Samtec Inc | - Tape and Reel (Alt: CLP-105-02-F-D-A-K-TR) RoHS : Compliant |
| 34,375 | |
| TLP109(IGM-TPR,E | Toshiba America Electronic Components | Optocoupler Single Open Collector-OUT 3.75kVrms 5-Pin SOIC T/R - Tape and Reel (Alt: TLP109(IGM-TPR,E) RoHS : Compliant |
| 12,000 | ||
| CLP-107-02-G-D | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 14 Contacts, Solder, CLP Series, Phosphor Bronze - Rail/Tube (Alt: CLP-107-02-G-D) RoHS : Compliant |
| 9,700 | ||
| CLP-102-02-L-D-TR | Samtec Inc | - Tape and Reel (Alt: CLP-102-02-L-D-TR) RoHS : Compliant |
| 8,625 | ||
| CLP-103-02-L-D-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 6 Contacts, Solder, CLP Series, Phosphor Bronze - Tape and Reel (Alt: CLP-103-02-L-D-TR) RoHS : Compliant |
| 6,900 | ||
| CLP-107-02-L-D-BE-P-TR | Samtec Inc | - Tape and Reel (Alt: CLP-107-02-L-D-BE-P-TR) RoHS : Compliant |
| 4,800 | ||
| CY8C5467AXI-LP108 | Infineon Technologies AG | MCU 32-Bit PSoC ARM Cortex M3 RISC 128KB Flash 2.5V/3.3V/5V 100-Pin TQFP Tray - Trays (Alt: CY8C5467AXI-LP108) RoHS : Compliant |
| 4,500 | ||
| CLP-104-02-L-D-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 8 Contacts, Surface Mount, CLP - Tape and Reel (Alt: CLP-104-02-L-D-TR) RoHS : Compliant |
| 3,000 | ||
| CLP-106-02-L-D-TR | Samtec Inc | - Tape and Reel (Alt: CLP-106-02-L-D-TR) RoHS : Compliant |
| 1,650 | ||
| CLP-108-02-L-D-A | Samtec Inc | - Rail/Tube (Alt: CLP-108-02-L-D-A) RoHS : Compliant |
| 1,525 | ||
| CLP-105-02-STL-D-P | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 10 Contacts, Solder, CLP Series, Phosphor Bronze - Rail/Tube (Alt: CLP-105-02-STL-D-P) RoHS : Compliant |
| 45 | ||
| CLP-104-02-G-D-BE | Samtec Inc | - Bulk (Alt: CLP-104-02-G-D-BE) RoHS : Compliant |
| 25 | ||
| CLP-109-02-LM-DH | Samtec Inc | - Rail/Tube (Alt: CLP-109-02-LM-DH) RoHS : Compliant |
| 13 | ||
| CLP-104-02-F-D | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 8 Contacts, Solder, CLP Series, Phosphor Bronze - Bulk (Alt: CLP-104-02-F-D) RoHS : Compliant |
| 10 | ||
| CLP-107-02-L-D-K | Samtec Inc | - Rail/Tube (Alt: CLP-107-02-L-D-K) RoHS : Compliant |
| 2 | ||
![]() Newark | CLP-102-02-F-D-TR | Samtec Inc | SOCKET, 1.27MM, VERTICAL SMT, 4WAY; RoHS : Compliant |
| 1,694 | |
| NTCLP100E3222HA | Vishay Intertechnologies | THERMISTOR, NTC, 3977K, 2.2 KOHM; RoHS : Compliant |
| 873 | ||
| CLP-104-02-L-D-TR | Samtec Inc | SOCKET, 1.27MM, SMD, 2X4WAY; RoHS : Compliant |
| 488 | ||
| CLP-104-02-F-D | Samtec Inc | Board-To-Board Connector, Low Profile, C; RoHS : Compliant |
| 329 | ||
| CLP-105-02-L-D-P-TR | Samtec Inc | BTB CONN, RCPT, 10POS, 2ROW, 1.27MM; Available until stocks are exhausted RoHS : Compliant |
| 290 | ||
| CLP-103-02-F-D-TR | Samtec Inc | SOCKET, 1.27MM, VERTICAL SMT, 6WAY; RoHS : Compliant |
| 282 | ||
| TLP109(E(T | Toshiba America Electronic Components | OPTOCOUPLER, TRANSISTOR, 3.75KV, SOIC-6; RoHS : Compliant |
| 279 | ||
| CLP-102-02-L-D-TR | Samtec Inc | SOCKET, 1.27MM, SMD, 2X2WAY; RoHS : Compliant |
| 241 | ||
| CLP-105-02-G-D-K-TR | Samtec Inc | PCB RCPT, 10POS, 2ROW, 1.27MM, SMT; RoHS : Compliant |
| 216 | ||
| CLP-104-02-F-D | Samtec Inc | CONNECTOR, RCPT, 8POS, 2ROW, 1.27MM; RoHS : Compliant |
| 170 | ||
| CLP-105-02-L-D-TR | Samtec Inc | RECEPTACLE, 1.27MM, SMD, 10WAY; RoHS : Compliant |
| 130 | ||
| CLP-108-02-G-D-PA | Samtec Inc | BTB CONN, RCPT, 16POS, 2ROW, 1.27MM; RoHS : Compliant |
| 86 | ||
| CLP-105-02-L-DH-TR | Samtec Inc | SOCKET, 1.27MM, SMD-DH, 2X5WAY; RoHS : Compliant |
| 24 | ||
| CLP-108-02-F-D-BE . | Samtec Inc | CONN, RCPT, 16POS, 2ROW, 1.27MM; RoHS : Compliant |
| 11 | ||
| CLP-103-02-G-D | Samtec Inc | CONNECTOR, RCPT, 6POS, 2ROW, 1.27MM; RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | EK1HMC7044LP10B | Analog Devices Inc | EVALUATION KIT ASSEMBLY RoHS : Compliant |
| 77 | |
| HMC7044BLP10BE | Analog Devices Inc | 3.2GHz, 14-Output Jitter Atten RoHS : Compliant |
| 0 | ||
| EK1HMC7044BLP10B | Analog Devices Inc | HMC7044B Evaluation Kit RoHS : Compliant |
| 0 | ||
| HMC7044LP10BETR | Analog Devices Inc | Multi-channel, dual loop jitte RoHS : Compliant |
| 0 | ||
| HMC7044LP10BE | Analog Devices Inc | Multi-channel, dual loop jitte RoHS : Compliant |
| 0 | ||
| HMC7044BLP10BETR | Analog Devices Inc | 3.2GHz, 14-Output Jitter Atten RoHS : Compliant |
| 0 | ||
![]() RS | SLP102M100A3P3 | Knowles CDE | CAPACITORS, ALUMINUM ELECTROLYTIC, SNAP IN 1000UF 100V 20% 105C RoHS : Compliant |
| 2,900 | |
| SLP102M200E7P3 | Knowles CDE | CAPACITOR, ALUMINUM ELECTROLYTIC, CAP 1000UF, TOL20%, SNAP IN, 200V, 30X40 RoHS : Compliant |
| 740 | ||
| 0828807 (US-EMLP (100X60)) | Phoenix Contact | PLASTIC LABEL, CARD, WHITE, UNLABELED, ADHESIVE, 100 X 60 MM LABEL SERIES |
| 172 | ||
| 0828910 (US-EMLP (100X60) SR) | Phoenix Contact | PLASTIC LABEL;CARD;SILVER;UNLABELED;THERMOMARK CARD;ADHESIVE; |
| 99 | ||
| SLP103M063H9P3 | Knowles CDE | CAPACITOR, AL ELECTROLYTIC, CAP 0.01 F, TOL 20%, 63 VDC, SNAP IN, 35X50 MM RoHS : Compliant |
| 78 | ||
| SLP101M450A3P3 | Knowles CDE | CAPACITOR, ALUMINUM ELECTROLYTIC, CAP 100UF, SNAP-IN, 450V, 22X30, 105C RoHS : Compliant |
| 25 | ||
| 0830304 (US-EMLP (104X135)) | Phoenix Contact | PLASTIC LABEL; CARD; WHITE; UNLABELED; US-EMLP (104X135) UNISHEET SERIES |
| 13 | ||
| BAM013L (BTL-P-1013-4R) | Balluff Inc | INDUCTIVE SENSOR, BTL, M12, 4MM, DC |
| 10 | ||
| TLP104USB | Tripp Lite | SURGE, PROTECTOR, POWER STRIP, 1-OUTLET, W, 2, USB, PORTS, 2.1A, 4FT, CORD RoHS : Compliant |
| 6 | ||
| TLP1006B | Tripp Lite | TRIPP LITE SURGE PROTECTOR STRIP 10-OUTLETS 6FT CORD BLACK |
| 1 | ||
| TLP1010USB | Tripp Lite | SURGE PROTECTOR, 5-15R OUTLETS, 2 USB PORTS, 10 FT CORD, 4500 JOULES, BLACK |
| 1 | ||
| TLP1008TELTV | Tripp Lite | SURGE PROTECTOR, 120V 10 OUTLET, RJ11, COAX 8FT 3345 JOULE, PROTECT IT SERIES |
| 1 | ||
| 6GK57982LP102AA6 | Siemens | IWLAN LIGHTNING PROTECTOR LP 798-2N |
| 1 | ||
| F058931 (M50-0-L-P10M-1-4-0 2130X000X00) | GEFRAN spa | MERCURY FILLED - MECHANICAL GAUGE |
| 1 | ||
| LP10 | Altech Corporation | LEGEND PLATE, 30 MM, |
| 0 | ||
![]() Microchip Technology Inc | LP1030DK1-G | Microchip Technology Inc | MOSFET, DUAL P-CHANNEL ENHANCEMENT-MODE, 300V, SOT-23, Projected EOL: 2028-06-13 - Contact for Pricing RoHS : Compliant | 0 | ||
![]() Bisco Industries | SLP100-413-01 | Essentra Components | 809 | |||
| SMFLP1.0 | Bivar Inc | RoHS : Compliant | 100 | |||
| SLP102F31-0AD | Shur-Lok Company | 85 | ||||
| SLP102F10-0 | Shur-Lok Company | 56 | ||||
| SLP102C8-0 | Shur-Lok Company | 33 | ||||
| SLP100-638-01 | Essentra Components | 31 | ||||
![]() Rochester Electronics | CY8C5467AXI-LP108 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 1,199 | |
AD7672LP10![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQCC28 RoHS : Not Compliant |
| 602 | ||
CY8C5467AXI-LP108![]() | Cypress Semiconductor | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 606 | ||
DF38086RLP10V![]() | Renesas Electronics Corporation | MCU 16bit H8/300H Tiny 36087 Series RoHS : Compliant |
| 368 | ||
![]() TME | CLP-107-02-L-DH-TR | Samtec Inc | Connector: pin strips; socket; female; PIN: 14; angled; 3.4A; 1.27mm RoHS : Compliant |
| 858 | |
| GC355XD7LP105KX17L | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 1uF; 450V; X7T; ±10%; SMD; 2220; 180mm RoHS : Compliant |
| 437 | ||
| CLP-109-02-L-D-BE-P-TR | Samtec Inc | Connector: pin strips; female; PIN: 18; straight; soldering; 1.27mm RoHS : Compliant |
| 97 | ||
| CLP-105-02-F-D | Samtec Inc | Connector: pin strips; socket; female; PIN: 10; vertical; SMT; 2x5 RoHS : Compliant |
| 85 | ||
| CLP-105-02-F-D-P-TR | Samtec Inc | Connector: pin strips; socket; female; PIN: 10; vertical; SMT; 2x5 RoHS : Compliant |
| 10 | ||
| CLP-103-02-F-D-BE-TR | Samtec Inc | Connector: pin strips; socket; female; PIN: 6; vertical; SMT; 1.27mm RoHS : Compliant |
| 5 | ||
| CLP-102-02-F-D-TR | Samtec Inc | Connector: pin strips; socket; female; PIN: 4; vertical; SMT; 1.27mm RoHS : Compliant |
| 0 | ||
| IS61NLP102418B-200B3L | Integrated Silicon Solution Inc | IC: SRAM memory; 18MbSRAM; 1Mx18bit; 3.3V; 3ns; TFBGA165; parallel RoHS : Compliant |
| 0 | ||
| SLLP109713S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 13; THT; 3A; 250V; 1x13 |
| 0 | ||
| WAADALP10AKPL | SONEL SA | Light meter probe + adapter; black |
| 0 | ||
| SLLP108213S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 13; THT; 3A; 250V; 1x13 |
| 0 | ||
| SLLP10827S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 7; THT; 3A; 250V; 1x7 |
| 0 | ||
| SLLP109717S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 17; THT; 3A; 250V; 1x17 |
| 0 | ||
| SLLP109719G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 19; THT; 3A; 250V; 1x19 |
| 0 | ||
| SLLP109721S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 21; THT; 3A; 250V; 1x21 |
| 0 | ||
![]() Ameya Holding Limited | CLP-107-02-F-D-K-TR | Samtec Inc | Samtec CLP 系列 排母, 14路, 1.27mm节距, 2行, 表面贴装, 直向, 可靠的双摩擦插座板 RoHS : Compliant | 2,810 | ||
| CLP-108-02-F-D-K-TR | Samtec Inc | Samtec CLP 系列 排母, 16路, 1.27mm节距, 2行, 表面贴装, 垂直, 双摩擦插座 RoHS : Compliant | 2,000 | |||
| CLP-105-02-L-D-K-TR | Samtec Inc | CON 2X5F P1.27 RoHS : Compliant | 1,864 | |||
| DIO32220LP10 | Dioo Microcircuits Co Ltd | RoHS : Compliant | 500 | |||
![]() ComSIT USA | GLS85LP1002AMCLBTEND000 | Greenliant Systems Ltd | AVAILABLE EU | 726 | ||
| 20VLP10R | VISHAY INTERTECHNOLOGY INC | AVAILABLE EU | 38 | |||
![]() ComSIT USA | HY6264LP10 | hyn | 8K X 8 STANDARD SRAM Standard SRAM, 8KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 4,058 | ||
| TLP102TPLF | Toshiba America Electronic Components | Logic Output Opto-couplers IC cplr IPM drive IFHL=3mA RoHS : Compliant | 3,845 | |||
| TLP109TPLET | Toshiba America Electronic Components | PHOTOCOUPLER GAALAS AND IRED AND PHOTO-IC Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 3,755 | |||
| KM62256ALP10 | Samsung Electronics Co. Ltd | 32KX8 BIT STATIC RAM Standard SRAM, 32KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 1,006 | |||
| TLP102TPRF | Toshiba America Electronic Components | Logic Output Opto-couplers IC cplr IPM drive IFHL=3mA RoHS : Compliant | 810 | |||
| SLP1001 | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 750 | |||
| HY6116ALP10 | hyn | 2K X 8 STANDARD SRAM Standard SRAM, 2KX8, 100ns, CMOS, PDIP24 RoHS : Not Compliant | 411 | |||
| TLP109EO | Toshiba America Electronic Components | GAALAS IRED AND PHOTO-IC PHOTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Not Compliant | 316 | |||
| TLP109E | Toshiba America Electronic Components | PHOTOCOUPLER IRED & PHOTO-IC Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 124 | |||
| TLP109TP | Toshiba America Electronic Components | PHOTOCOUPLER IRED & PHOTO-IC Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Not Compliant | 58 | |||
| SST85LP1004AMCLBTE | Silicon Storage Technology | 4 GBYTE NANDRIVE Flash Memory Drive, IDE Compatible, CMOS, PBGA91 RoHS : Not Compliant | 21 | |||
| HM6264BLP10L | Hitachi Ltd | 64 K SRAM (8-KWORD X 8-BIT) Standard SRAM, 8KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 21 | |||
| HM62256ALP10 | Hitachi Ltd | 32K X 8 STANDARD SRAM Standard SRAM, 32KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 13 | |||
| TLP109ET | Toshiba America Electronic Components | Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Not Compliant | 6 | |||
| HY6264ALP10 | hyn | 8K X 8BIT CMOS SRAM Standard SRAM, 8KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 1 | |||
![]() Interstate Connecting Components | SHLP-10V-S-B | JST Manufacturing | RoHS : Compliant |
| 350 | |
| KEA-LP1040-24-C1670 | Orion Fans | LED DRIVER | 250 | |||
| KEA-LP1040-36-C1050 | Orion Fans | LED DRIVER | 93 | |||
| CLP-105-02-G-D | MISC MIL-AERO | OE | 20 | |||
| PBLP-1001-1 | Bivar Inc | PUSH BUTTON LIGHT PIPE, 0.110 0.110 SHAFT, WHITE POLYCARBO RoHS : Compliant |
| 15 | ||
| CLP-100 | TE Connectivity | LINEAR STRING POT RoHS : Unknown |
| 0 | ||
| ELLP10210 | Amphenol PCD | ELLP SERIES PLUG 10POS BLACK MATTE TIN | 0 | |||
| ELLP10211E | Amphenol PCD | ELLP SERIES PLUG 10POS BLACK MATTE TIN | 0 | |||
| MLP-100 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| ELLP10410 | Amphenol PCD | ELLP SERIES PLUG 10POS BLACK MATTE TIN | 0 | |||
| PSLP-103 | Amphenol Industrial Operations | 10.3 SURLOK PIN 10-647178-001 | 0 | |||
| ZRLP-1012-14P | Amphenol Oil & Gas Technology | STARLINE | 0 | |||
| ELLP10210E | Amphenol PCD | ELLP SERIES PLUG 10POS BLACK MATTE TIN | 0 | |||
![]() NexGen Digital | CLP-103-02-F-D-BE-TR | Samtec Inc | RoHS : Compliant | 8,966 | ||
| CLP-103-02-F-D-BE | Samtec Inc | RoHS : Compliant | 1,305 | |||
| CLP-103-02-L-D | Samtec Inc | RoHS : Compliant | 178 | |||
| CLP-108-02-L-DEOS | Samtec Inc | 43 | ||||
![]() PEI Genesis | LP102 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| LP103 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
![]() Powell Electronics | PBLP-1001 | Bivar Inc | Push Button Light Pipe, 0.110 Shaft, Cle |
| 10,520 | |
| CLP-105-02-G-D-A | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 5,291 | ||
| CLP-105-02-L-DH-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 3,865 | ||
| CLP-105-02-L-D-P-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 3,245 | ||
| CLP-105-02-G-D-K-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 2,893 | ||
| CLP-105-02-L-D-A-P-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 2,708 | ||
| CLP-103-02-G-D | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 1,502 | ||
| CLP-102-02-L-D-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 1,369 | ||
| CLP-108-02-G-D | Samtec Inc | SOCKET STRIP 1.27MM 8POS 2ROW RoHS : Compliant |
| 1,331 | ||
| CLP-103-02-F-D-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 545 | ||
| CLP-105-02-F-D-BE | Samtec Inc | SOCKET STRIP 1.27MM 5POS 2ROW RoHS : Compliant |
| 375 | ||
| CLP-103-02-L-D-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 195 | ||
| CLP-105-02-F-DH | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 79 | ||
| CLP-105-02-F-D-P | Samtec Inc | SOCKET STRIP 1.27MM 5POS 2ROW RoHS : Compliant |
| 74 | ||
| CLP-106-02-L-D-A | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 21 | ||
![]() Richardson RFPD | CLP-105-02-L-D-P-TR | Samtec Inc | Conn Socket Strip SKT 10 POS 1.27mm Solder ST Top RoHS : Compliant | 0 | ||
| HMC7044BLP10BE | Analog Devices Inc | Clock Generator 0.00015MHz to 800MHz-IN 3200MHz-OU RoHS : Compliant | 0 | |||
| MLP102T200EB0A | Knowles CDE | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| MLP102M200EB1A | Knowles CDE | Cap Aluminum Lytic 1000uF 200V 20% (44.45 X 12.7 X RoHS : Not Compliant |
| 0 | ||
| CLP-104-02-L-D | Samtec Inc | Conn Socket Strip SKT 8 POS 1.27mm Solder ST Top E RoHS : Compliant | 0 | |||
| HC8LP-100-R | Eaton Corporation | Inductor Power Wirewound 9.9uH/10uH 20% 100KHz Pow RoHS : Compliant |
| 0 | ||
| CLP-105-02-F-D-P-TR | Samtec Inc | Conn Socket Strip SKT 10 POS 1.27mm Solder ST Top RoHS : Compliant | 0 | |||
| SLP103M035C7P3 | Knowles CDE | Cap Aluminum Lytic 10000uF 35V 20% (25 X 40mm) Sna RoHS : Compliant |
| 0 | ||
| EK1HMC7044LP10B | Analog Devices Inc | HMC7044 Clock Generator and Synthesizer Evaluation RoHS : Compliant |
| 0 | ||
| HMC7044LP10BE | Analog Devices Inc | Clock Generator 10MHz to 500MHz-IN 68-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| HMC7044LP10BETR | Analog Devices Inc | Clock Generator 0.00015MHz to 800MHz-IN 3200MHz-OU RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | CLP-107-02-F-D-K-TR | Samtec Inc | INSTOCK RoHS : Compliant | 64,480 | ||
| CLP-107-02-F-D-P-TR | Samtec Inc | INSTOCK RoHS : Compliant | 49,595 | |||
| CLP-107-02-H-D-P-TR | Samtec Inc | INSTOCK RoHS : Compliant | 17,780 | |||
| CLP-105-02-F-D-A-P-TR | Samtec Inc | INSTOCK RoHS : Compliant | 11,700 | |||
| CLP-105-02-G-D-FR | Samtec Inc | INSTOCK RoHS : Compliant | 7,625 | |||
TL75LP10QPWLE![]() | Texas Instruments | INSTOCK RoHS : Not Compliant | 1,010 | |||
| CLP-108-02-LM-D-P-TR | INSTOCK | 313 | ||||
| CLP-105-02-L-D-TR | Samtec Inc | INSTOCK RoHS : Compliant | 257 | |||
| CLP-102-02-L-D-TR | Samtec Inc | INSTOCK RoHS : Compliant | 222 | |||
| ELP101M2GBB | Hitano Enterprise Corp | INSTOCK RoHS : Compliant | 166 | |||
| CLP-105-02-L-D-P-TR | Samtec Inc | INSTOCK RoHS : Compliant | 50 | |||
| KM62256ALP-10 | INSTOCK | 25 | ||||
| KM62256ALP-10 | Samsung Electro-Mechanics | INSTOCK | 16 | |||
| HM6264BLP10L | GRIDC | INSTOCK | 13 | |||
| CLP-108-02-F-D-P-TR | Samtec Inc | INSTOCK RoHS : Compliant | 10 | |||
![]() Avnet Abacus | CLP-104-02-L-D-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 8 Contacts Surface Mount CLP (Alt: CLP-104-02-L-D-TR) RoHS : Compliant | 8,959 | ||
| CLP-105-02-F-D | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 10 Contacts Surface Mount CLP (Alt: CLP-105-02-F-D) RoHS : Compliant | 5,570 | |||
| CLP-105-02-L-D-P-TR | Samtec Inc | (Alt: CLP-105-02-L-D-P-TR) RoHS : Compliant | 4,360 | |||
| CLP-104-02-G-D-TR | Samtec Inc | (Alt: CLP-104-02-G-D-TR) RoHS : Compliant | 3,525 | |||
| CLP-105-02-L-D-P-FR | Samtec Inc | (Alt: CLP-105-02-L-D-P-FR) RoHS : Compliant | 2,750 | |||
| CLP-106-02-F-D-K-TR | Samtec Inc | (Alt: CLP-106-02-F-D-K-TR) RoHS : Compliant | 1,770 | |||
| CLP-102-02-G-D-TR | Samtec Inc | (Alt: CLP-102-02-G-D-TR) RoHS : Compliant | 1,725 | |||
| CLP-104-02-L-D | Samtec Inc | (Alt: CLP-104-02-L-D) RoHS : Compliant | 1,183 | |||
| CLP-107-02-F-D | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 14 Contacts Surface Mount CLP Series (Alt: CLP-107-02-F-D) RoHS : Compliant | 628 | |||
| CLP-109-02-L-D-BE-P-TR | Samtec Inc | (Alt: CLP-109-02-L-D-BE-P-TR) RoHS : Compliant | 97 | |||
| CLP-105-02-G-D | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 10 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-105-02-G-D) RoHS : Compliant | 32 | |||
| RLP1040R20FB00 | Vishay Intertechnologies | Resistor 402 Ohm 1 10 W Axial Leaded Wirewound Precision (Alt: RLP1040R20FB00) RoHS : Compliant | 0 | |||
| CLP-102-02-L-D-TR | Samtec Inc | (Alt: CLP-102-02-L-D-TR) RoHS : Compliant | 0 | |||
| KC355QD7LP105KV01L | Murata Manufacturing Co Ltd | Multilayer Ceramic Capacitor 1 uF 450 V 10 X7T KC3 Series 55 C 125 C AECQ200 (Alt: KC355QD7LP105KV01L) RoHS : Not Compliant | 0 | |||
| CLP-102-02-L-DH-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 4 Contacts Surface Mount Right Angle (Alt: CLP-102-02-L-DH-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | CLP-105-02-L-DH-FR | Samtec Inc | (Alt: CLP-105-02-L-DH-FR) RoHS : Compliant | 2,550 | ||
| TLP1013V1-R120-R | Eaton Corporation | BUSTLP1013V1-R120-R TLVR INDUCTOR 120NH (Alt: TLP1013V1-R120-R) RoHS : Compliant |
| 1,400 | ||
| CLP-104-02-F-DH | Samtec Inc | Conn Socket Strip SKT 8 POS 1.27mm Solder RA SMD (Alt: CLP-104-02-F-DH) RoHS : Compliant |
| 850 | ||
| CLP-104-02-L-DH | Samtec Inc | (Alt: CLP-104-02-L-DH) RoHS : Compliant |
| 5 | ||
| MSRLP10NAC6474MRNA01 | TAIYO YUDEN | TYCMSRLP10NAC6474MRNA01 CAP, 0204, X6S, (Alt: MSRLP10NAC6474MRNA01) RoHS : Compliant | 0 | |||
| CLP-106-02-F-D-TR | Samtec Inc | (Alt: CLP-106-02-F-D-TR) RoHS : Compliant | 0 | |||
| CLP-104-02-F-D-A-K-TR | Samtec Inc | (Alt: CLP-104-02-F-D-A-K-TR) RoHS : Compliant | 0 | |||
| CLP-104-02-L-D-TR | Samtec Inc | (Alt: CLP-104-02-L-D-TR) RoHS : Compliant | 0 | |||
| CLP-105-02-F-DH-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 10 Contacts, Surface Mount Right Angle (Alt: CLP-105-02-F-DH-TR) RoHS : Compliant | 0 | |||
| CLP-102-02-F-D-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 4 Contacts, Surface Mount, CLP Series (Alt: CLP-102-02-F-D-TR) RoHS : Compliant | 0 | |||
| IHLP1008ABEZ1R0M5A | Vishay Intertechnologies | Power Inductor (SMD), 1 ?H, 3.8 A, Shielded, 3.9 A, IHLP-1008ABEZ-5A Series, 1008 [2520 Metric] (Alt: IHLP1008ABEZ1R0M5A) RoHS : Compliant | 0 | |||
| TLP109(TPL,E(T | Toshiba America Electronic Components | Photocoupler 1-CH Open Collector-OUT 3750Vrms 5-Pin SOIC T/R (Alt: TLP109(TPL,E(T) RoHS : Compliant | 0 | |||
| MCBLP104GD7435MF1A01 | TAIYO YUDEN | TYCMCBLP104GD7435MF1A01 2.5V X7T 4.3UF 2 (Alt: MCBLP104GD7435MF1A01) RoHS : Compliant | 0 | |||
| TLP1013V1-R150-R | Eaton Corporation | BUSTLP1013V1-R150-R TLVR INDUCTOR 150NH (Alt: TLP1013V1-R150-R) RoHS : Compliant | 0 | |||
| CLP-105-02-F-D-BE-K-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 10 Contacts, Solder, CLP Series, Phosphor Bronze (Alt: CLP-105-02-F-D-BE-K-TR) RoHS : Compliant | 0 | |||
![]() Avnet Silica | D5V0M2B3LP10-7 | Diodes Incorporated | SURGE PROTECTION PP X2DFN10103 TR 5K (Alt: D5V0M2B3LP10-7) RoHS : Compliant | 0 | ||
| D3V3L2B3LP10-7 | Diodes Incorporated | Diode TVS Dual BiDir 33V 35W 3Pin DFN TR (Alt: D3V3L2B3LP10-7) RoHS : Compliant | 0 | |||
IS61NLP102436B-200B3LI![]() | Integrated Silicon Solution Inc | SRAM Chip Sync Quad 33V 36MBit 1M x 36 31ns 165Pin TFBGA (Alt: IS61NLP102436B-200B3LI) RoHS : Compliant | 0 | |||
IS61NLP102436B-200TQLI![]() | Integrated Silicon Solution Inc | 36MbNoWaitPipelineSync1Mb x 36200Mhz33v25v IO100 Pin TQFP RoHS (Alt: IS61NLP102436B-200TQLI) RoHS : Compliant | 0 | |||
| IS61NLP102418B-200B3LI | Integrated Silicon Solution Inc | SRAM Chip Sync Dual 33V 18MBit 1M x 18 3ns 165Pin TFBGA (Alt: IS61NLP102418B-200B3LI) RoHS : Compliant | 0 | |||
| GLS85LP1001P-I-LBTE-ND003 | Greenliant Systems Ltd | (Alt: GLS85LP1001P-I-LBTE-ND003) RoHS : Compliant | 0 | |||
IS61NLP102436B-200TQLI-TR![]() | Integrated Silicon Solution Inc | SRAM Chip Sync Quad 33V 36MBit 1M x 36 31ns 100Pin TQFP TR (Alt: IS61NLP102436B-200TQLI-TR) RoHS : Compliant | 0 | |||
| GLS85LP1008P-S-I-40CN-ED001 | Greenliant Systems Ltd | 8GBYTE SLC NANDRIVE EVALUATION BOARD 40PIN ATA CONNECTO (Alt: GLS85LP1008P-S-I-40CN-ED001) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ASDMPALP-100.0000MHZ-L-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| ASVMPALP-100.0000MHZ-LJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPALP-100.0000MHZ-XR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPALP-100.0000MHZ-LR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPALP-100.0000MHZ-XJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-LJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPALP-100.0000MHZ-XJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPALP-100.0000MHZ-XR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-LR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPALP-100.0000MHZ-L-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPALP-100.0000MHZ-X-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-L-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-X-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-XJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPALP-100.0000MHZ-LR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | RSLP100B | Essentra Components | RIVETS SNAP LATCHES - PLUNGER: | 0 | ||
| SLP100-316-01 | Essentra Components | RivetConnectorNatural.316 in Hold Rivet Connector Natural | 0 | |||
| SLP100-413-01 | Essentra Components | RivetConnectorNatural.413 in Hold Rivet Connector Natural | 0 | |||
| RSLP100W | Essentra Components | RIVETS SNAP LATCHES - PLUNGERN | 0 | |||
| SLP100-330-01 | Essentra Components | RivetConnectorNatural.330 in Hold Rivet Connector Natural | 0 | |||
| SLP100-236-01 | Essentra Components | RivetConnectorNatural.236 in Hold Rivet Connector Natural | 0 | |||
| SLP100-245-01 | Essentra Components | RivetConnectorNatural.245 in Hold Rivet Connector Natural | 0 | |||
| SLP100-177-01 | Essentra Components | RivetConnectorNatural.177 in Hold Rivet Connector Natural | 0 | |||
| SLP100-221-01 | Essentra Components | RivetConnectorNatural.221 in Hold Rivet Connector Natural | 0 | |||
| SLP100-638-01 | Essentra Components | RivetConnectorNatural.638 in Hold Rivet Connector Natural | 0 | |||
| SLP100-307-01 | Essentra Components | RivetConnectorNatural.307 in Hold Rivet Connector Natural | 0 | |||
![]() EBV Elektronik | TLP109(TPL,E(T | Toshiba America Electronic Components | Photocoupler 1CH Open CollectorOUT 3750Vrms 5Pin SOIC TR (Alt: TLP109(TPL,E(T) RoHS : Compliant | 150,000 | ||
| TLP109(E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 5Pin SO (Alt: TLP109(E(T) RoHS : Compliant | 625 | |||
| TLP104(TPL,E(O | Toshiba America Electronic Components | Optocoupler LogicOut Open Collector DCIN 1CH 5Pin SO TR (Alt: TLP104(TPL,E(O) RoHS : Compliant | 0 | |||
| TLP109(TPR,E(O | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor With Base DCOUT 5Pin 114L1 TR (Alt: TLP109(TPR,E(O) RoHS : Compliant | 0 | |||
| TLP109(TPR,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor DCOUT 5Pin SO TR (Alt: TLP109(TPR,E(T) RoHS : Compliant | 0 | |||
| TLP109(TPL,E(O | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor With Base DCOUT 5Pin 114L1 TR (Alt: TLP109(TPL,E(O) RoHS : Compliant | 0 | |||
| CY8C5467AXI-LP108 | Infineon Technologies AG | MCU 32Bit PSoC ARM Cortex M3 RISC 128KB Flash 25V33V5V 100Pin TQFP Tray (Alt: SP005655375) RoHS : Compliant | 0 | |||
| CY8C5468AXI-LP106 | Infineon Technologies AG | MCU 32bit PSoC ARM Cortex M3 RISC 256KB Flash 18V25V33V5V 100Pin TQFP Tray (Alt: SP005655381) RoHS : Compliant | 0 | |||
| TLP109(V4-TPL,E(T | Toshiba America Electronic Components | ICCPL1MBPSOPEN COLLECTOR (Alt: TLP109(V4-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP109(IGM-TPL,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor DCOUT 5Pin SO TR (Alt: TLP109(IGM-TPL,E(T) RoHS : Compliant | 0 | |||
| XLP108B0IFSB00120G | Broadcom Limited | Communication ICs (Alt: XLP108B0IFSB00120G) RoHS : Compliant | 0 | |||
![]() Flip Electronics | BLP10H610Z | Flip Electronics Manufacturing Services | Stock, Ship Today | 61,837 | ||
| CY8C5467AXI-LP108 | Infineon Technologies AG | Stock RoHS : Compliant | 7,000 | |||
| BLP10H610AZ | Flip Electronics Manufacturing Services | Stock, Ship Today | 1,393 | |||
| BLP10H605Z | Flip Electronics Manufacturing Services | Stock, Ship Today | 1,000 | |||
| BLP10H6120PY | Flip Electronics Manufacturing Services | Stock, Ship Today | 138 | |||
| BLP10H603AZ | Flip Electronics Manufacturing Services | Stock, Ship Today | 135 | |||
![]() Maritex | SHLP-10V-S-B | JST Manufacturing | Wire to Board Connectors; SHLP-10V-S-B; JST; 10; Female RoHS : Compliant |
| 50,281 | |
| TLP109(TPL,E | Toshiba Corporation | Optocouplers; TLP109(TPL,E; TOSHIBA; Surface Mount; 3.75 kV; 20 mA; 1 |
| 30,465 | ||
![]() Master Electronics | CLP-102-02-L-D-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 2,000 | |
| CLP-106-02-F-D-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 975 | ||
| LP1007EXXH00R | APEM Inc | Joysticks 5000000Cycles RoHS : Compliant |
| 0 | ||
| CLP-102-02-L-DH-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-103-02-FM-DH-FR | Samtec Inc | LOW PROFILE DUAL-WIPE SOC RoHS : Compliant |
| 0 | ||
| CLP-103-02-G-D-FR | Samtec Inc | Connector Socket Strip 6 Position 1.27mm Solder Straight Surface Mount T/R RoHS : Compliant |
| 0 | ||
| CLP-103-02-SM-D-BE-A-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CLP-104-02-F-D-PA-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-105-02-G-D-K-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-105-02-L-D-BE-A-P-FR | Samtec Inc | LOW PROFILE DUAL-WIPE SOC RoHS : Compliant |
| 0 | ||
| CLP-106-02-F-D-PA-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-106-02-FM-D-BE | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-106-02-G-D-BE-A-K | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-106-02-H-D-A-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CLP-107-02-F-D-PA | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PEANLP1006 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 790 MHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 1.7:1. 10-10.5-11 dBi Log Periodic Antenna 790-960 MHz, 1.71-2.17 GHz, 2.3-2.7 GHz, N Type Female, V-pol, 1.7:1 Max VSWR., Pasternack’s PEANLP1006 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-10.5-11 dBi log periodic Antenna operates within a range of 790 MHz-2.7 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 790 MHz to 960 MHz, gain of 10, VSWR max of 1.7:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.17 GHz, gain of 10.5 and VSWR max of 1.5:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1006 antenna has a F1 HPBW Vertical Elevation of 47 Degrees, F2 HPBW Vertical Elevation of 46 Degrees and a HPBW Horizontal Azimuth of 58 Degrees with 100 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-10.5-11 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1006 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 17.4in, width of 2.5in, and weighs 2.4lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1006 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1006 is a directional series antenna with a multi band type and has a 10-10.5-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-10.5-11 dBi directional 790 MHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1006, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 980 | |
| PE51LP1001 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical or Horizontal, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 9 dB, Maximum Input VSWR: 1.6:1. |
| 434 | ||
| PEANLP1016 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 806 MHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 9 dBi, Maximum Input VSWR: 2:1. 9-10 dBi Log Periodic Antenna 806-960 MHz, 1.71-2.7 GHz, N Type Female, V-pol, 1.7:1 Typ VSWR., Pasternack’s PEANLP1016 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 9-10 dBi log periodic Antenna operates within a range of 806 MHz-2.7 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 806 MHz to 960 MHz, gain of 9, VSWR max of 2:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.7 GHz, gain of 10 and VSWR max of 1.7:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1016 antenna has a F1 HPBW Vertical Elevation of 65 Degrees, F2 HPBW Vertical Elevation of 50 Degrees and a HPBW Horizontal Azimuth of 80 Degrees with 100 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 9-10 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1016 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 150 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 11.6in, width of 8.26in, and weighs 1.85lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1016 with green colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1016 is a directional series antenna with a multi band type and has a 9-10 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 9-10 dBi directional 806 MHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1016, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 393 | ||
| PEANLP1005 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical and Horizontal, Minimum Frequency: 5.15 GHz, Maximum Frequency: 5.875 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.7:1. 15 dBi Log Periodic Antenna 5.15-5.875 GHz, N Type Female, V and H-pol, 1.7:1 Max VSWR., Pasternack’s PEANLP1005 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 15 dBi log periodic Antenna operates within a range of 5.15 GHz-5.875 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical and horizontal polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 5.15 GHz to 5.875 GHz, gain of 15, VSWR max of 1.7:1 at F1; and band 2 with a frequency range of Error to Error, gain of and VSWR max of at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1005 antenna has a F1 HPBW Vertical Elevation of 23 Degrees, and a HPBW Horizontal Azimuth of 25 Degrees with 100 Watts max input power. The single band directional antenna has a type N female standard polarity threaded connector, gain nominal of 15 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1005 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 15.3in, width of 3.1in, and weighs 2.65lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1005 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1005 is a directional series antenna with a single band type and has a 15 dBi gain nominal. The included mounting bracket and hardware for this single band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical and horizontal polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 15 dBi directional 5.15 GHz-5.875 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1005, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 370 | ||
| PEANLP1011 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 5.725 GHz, Maximum Frequency: 5.85 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 16.5 dBi Log Periodic Antenna 5.725-5.85 GHz, N Type Female, V-pol, 1.5:1 Max VSWR., Pasternack’s PEANLP1011 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 16.5 dBi log periodic Antenna operates within a range of 5.725 GHz-5.85 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 5.725 GHz to 5.85 GHz, gain of 16.5, VSWR max of 1.5:1 at F1; and band 2 with a frequency range of Error to Error, gain of and VSWR max of at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1011 antenna has a F1 HPBW Vertical Elevation of 19 Degrees, and a HPBW Horizontal Azimuth of 19 Degrees with 100 Watts max input power. The single band directional antenna has a type N female standard polarity threaded connector, gain nominal of 16.5 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1011 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 16.5in, width of 1.5in, and weighs 1.35lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1011 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1011 is a directional series antenna with a single band type and has a 16.5 dBi gain nominal. The included mounting bracket and hardware for this single band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 16.5 dBi directional 5.725 GHz-5.85 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1011, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 358 | ||
| PEANLP1009 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 2.3 GHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 10 dBi Log Periodic Antenna 2.3-2.5 GHz, N Type Female, V-pol, 1.5:1 Max VSWR., Pasternack’s PEANLP1009 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10 dBi log periodic Antenna operates within a range of 2.3 GHz-2.5 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 2.3 GHz to 2.5 GHz, gain of 10, VSWR max of 1.5:1 at F1; and band 2 with a frequency range of Error to Error, gain of and VSWR max of at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1009 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, and a HPBW Horizontal Azimuth of 55 Degrees with 100 Watts max input power. The single band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1009 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 5.9in, width of 2.2in, and weighs 1.1lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1009 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1009 is a directional series antenna with a single band type and has a 10 dBi gain nominal. The included mounting bracket and hardware for this single band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10 dBi directional 2.3 GHz-2.5 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1009, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 349 | ||
| PEANLP1010 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 3.4 GHz, Maximum Frequency: 3.6 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 14 dBi Log Periodic Antenna 3.4-3.6 GHz, N Type Female, V-pol, 1.5:1 Max VSWR., Pasternack’s PEANLP1010 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 14 dBi log periodic Antenna operates within a range of 3.4 GHz-3.6 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 3.4 GHz to 3.6 GHz, gain of 14, VSWR max of 1.5:1 at F1; and band 2 with a frequency range of Error to Error, gain of and VSWR max of at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1010 antenna has a F1 HPBW Vertical Elevation of 27 Degrees, and a HPBW Horizontal Azimuth of 30 Degrees with 100 Watts max input power. The single band directional antenna has a type N female standard polarity threaded connector, gain nominal of 14 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1010 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 16.5in, width of 1.5in, and weighs 1.35lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1010 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1010 is a directional series antenna with a single band type and has a 14 dBi gain nominal. The included mounting bracket and hardware for this single band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 14 dBi directional 3.4 GHz-3.6 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1010, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 336 | ||
| PEANLP1008 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 1.92 GHz, Maximum Frequency: 2.17 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 10 dBi Log Periodic Antenna 1.92-2.17 GHz, N Type Female, V-pol, 1.5:1 Max VSWR., Pasternack’s PEANLP1008 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10 dBi log periodic Antenna operates within a range of 1.92 GHz-2.17 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 1.92 GHz to 2.17 GHz, gain of 10, VSWR max of 1.5:1 at F1; and band 2 with a frequency range of Error to Error, gain of and VSWR max of at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1008 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, and a HPBW Horizontal Azimuth of 55 Degrees with 100 Watts max input power. The single band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1008 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 5.9in, width of 2.2in, and weighs 1.1lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1008 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1008 is a directional series antenna with a single band type and has a 10 dBi gain nominal. The included mounting bracket and hardware for this single band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10 dBi directional 1.92 GHz-2.17 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1008, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 268 | ||
| PEANLP1007 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 806 MHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 9-9 dBi Log Periodic Antenna 806-960 MHz, 1.71-2.5 GHz, N Type Female, V-pol, 1.5:1 Max VSWR., Pasternack’s PEANLP1007 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 9-9 dBi log periodic Antenna operates within a range of 806 MHz-2.5 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 806 MHz to 960 MHz, gain of 9, VSWR max of 1.5:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.5 GHz, gain of 9 and VSWR max of 1.5:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1007 antenna has a F1 HPBW Vertical Elevation of 55 Degrees, F2 HPBW Vertical Elevation of 55 Degrees and a HPBW Horizontal Azimuth of 65 Degrees with 100 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 9-9 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1007 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 11.8in, width of 2.9in, and weighs 2.05lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1007 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1007 is a directional series antenna with a multi band type and has a 9-9 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 9-9 dBi directional 806 MHz-2.5 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1007, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 244 | ||
| PEANLP1012 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 698 MHz, Maximum Frequency: 4.2 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 2:1. 10-11-11 dBi Log Periodic Antenna 698-960 MHz, 1.71-2.7 GHz, 3.3-4.2 GHz, N Type Female, V-pol, 1.7:1 Typ VSWR, 2 Port, Low PIM., Pasternack’s PEANLP1012 2 port directional low pim log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-11-11 dBi log periodic Antenna operates within a range of 698 MHz-4.2 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, 2 port vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The low pim directional antenna with band 1 frequency range of 698 MHz to 960 MHz, gain of 10, VSWR max of 2:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.7 GHz, gain of 11 and VSWR max of 1.7:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1012 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, F2 HPBW Vertical Elevation of 45 Degrees and a HPBW Horizontal Azimuth of 65 Degrees with 100 Watts max input power. The multi band low pim directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-11-11 dBi gain and can be used to boost cellular LTE signals. The model 2 port PEANLP1012 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 150 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 16.14in, width of 8.26in, and weighs 1.85lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1012 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1012 is a directional low pim series antenna with a multi band type and has a 10-11-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The 2 port low pim directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-11-11 dBi low pim directional 698 MHz-4.2 GHz N Type female connector antennas. Order our LTE outdoor directional low pim antenna PEANLP1012, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 168 | ||
| PEANLP1003 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 617 MHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 2:1. 10-10-11 dBi Log Periodic Antenna 617-698 MHz, 698-960 MHz, 1.71-2.7 GHz, N Type Female, V-pol, 1.5:1 Typ VSWR., Pasternack’s PEANLP1003 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-10-11 dBi log periodic Antenna operates within a range of 617 MHz-2.7 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 617 MHz to 698 MHz, gain of 10, VSWR max of 2:1 at F1; and band 2 with a frequency range of 698 MHz to 960 MHz, gain of 10 and VSWR max of 2:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1003 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, F2 HPBW Vertical Elevation of 50 Degrees and a HPBW Horizontal Azimuth of 75 Degrees with 50 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-10-11 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1003 designed specifically for the outdoors has an operational temperature between -40° to 70° deg C, and can withstand a wind velocity of up to 150 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 50 Watts. Built tough, this Type N connector has an overall length of 17.5in, width of 1.5in, and weighs 1.05lbs. The mounting pole diameter is between 1.57in - 1.97in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1003 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1003 is a directional series antenna with a multi band type and has a 10-10-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-10-11 dBi directional 617 MHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1003, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 112 | ||
| PEANLP1013 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 698 MHz, Maximum Frequency: 4.2 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 2:1. 10-11-11 dBi Log Periodic Antenna 698-960 MHz, 1.71-2.5 GHz, 3.3-4.2 GHz, N Type Female, V-pol, 1.7:1 Typ VSWR., Pasternack’s PEANLP1013 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-11-11 dBi log periodic Antenna operates within a range of 698 MHz-4.2 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 698 MHz to 960 MHz, gain of 10, VSWR max of 2:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.5 GHz, gain of 11 and VSWR max of 1.7:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1013 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, F2 HPBW Vertical Elevation of 45 Degrees and a HPBW Horizontal Azimuth of 65 Degrees with 100 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-11-11 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1013 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 150 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 16.14in, width of 8.26in, and weighs 1.85lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1013 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1013 is a directional series antenna with a multi band type and has a 10-11-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-11-11 dBi directional 698 MHz-4.2 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1013, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 74 | ||
| PEANLP1004 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical and Horizontal, Minimum Frequency: 600 MHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 7 dBi, Maximum Input VSWR: 2.5:1. 600-960 / 1710-2700 / 3300-3800 MHz, 7 / 9 / 11, MIMO Log Periodic Antenna, 2 x N Female Connector., Pasternack’s PEANLP1004 high gain log periodic antenna is designed to operate from 600 to 3800 MHz. With 11 dbi of gain, PEANLP1004 is ideal for boosting 5G, LTE, CMDA, LoRA, IoT, WIFI. The Pasternack log periodic PEANLP1004 can be used for long distance directional communication over a wide range of frequencies. Log periodic antennas from Pasternack function as boosters where the existing cellular signal is weak and needs to reach further distances. The PEANLP1004 has V/H polarization, 85 horizontal beamwidth, and 65 vertical beamwidth for point to point communication. The included mounting brackets allow for either vertical or horizontal mounting configurations. The directional PEANLP1004 antenna has 2 Type N Female connector on a 20 Inches long pigtail. The 11 dBi max gain log periodic PEANLP1004 antenna operates in 5G bands n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n34, n38, n39, n40, n41, n48, n53, n65, n66, n67, n67, n70, n71, n77, n78, n80, n81, n82, n83, n84, n85, n86, n89, n90, n91, n92, n93, n94, n95, n97, n98. This 600 to 3800 MHz 5G directional log periodic antenna with Type N connector is in stock and ready to ship the same day. Contact Pasternack’s knowledgeable and friendly technical support and sales staff for your answers on antennas or other products. |
| 30 | ||
| PE51LP1002 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. |
| 2 | ||
| PEANLP1014 | Pasternack Enterprises | Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 698 MHz, Maximum Frequency: 6 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 2:1. 10-11-11 dBi Log Periodic Antenna 698-960 MHz, 1.71-2.7 GHz, 3.3-6 GHz, N Type Female, V-pol, 1.7:1 Typ VSWR Low PIM., Pasternack’s PEANLP1014 directional low pim log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-11-11 dBi log periodic Antenna operates within a range of 698 MHz-6 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The low pim directional antenna with band 1 frequency range of 698 MHz to 960 MHz, gain of 10, VSWR max of 2:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.7 GHz, gain of 11 and VSWR max of 1.7:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1014 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, F2 HPBW Vertical Elevation of 45 Degrees and a HPBW Horizontal Azimuth of 65 Degrees with 100 Watts max input power. The multi band low pim directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-11-11 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1014 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 150 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 17.5in, width of 8.26in, and weighs 1.85lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1014 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1014 is a directional low pim series antenna with a multi band type and has a 10-11-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The low pim directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-11-11 dBi low pim directional 698 MHz-6 GHz N Type female connector antennas. Order our LTE outdoor directional low pim antenna PEANLP1014, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 0 | ||
![]() Sager | CLP-105-02-G-D-K-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 4,383 | |
| CLP-102-02-L-D-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 2,074 | ||
| LP10 | ABB Group | Thomas & Betts |
| 0 | ||
| CLP-102-02-L-D-BE-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CLP-102-02-L-DH-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-103-02-FM-DH-FR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-103-02-G-D-FR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-104-02-F-D-PA-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-105-02-G-D-A-P | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-105-02-L-D-BE-A-P-FR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-106-02-F-D-PA-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-106-02-F-D-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-106-02-FM-D-BE | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-106-02-G-D-BE-A-K | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-107-02-F-D-PA | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
![]() Vyrian | TLP108(TPL,F) | Toshiba America Electronic Components | IC Output Optocoupler, 1-Element, 3750V Isolation RoHS : Compliant | 17,819 | ||
| CLP-105-02-G-D-A | Samtec Inc | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 12,240 | |||
| TLP104(V4-TPL,E | Toshiba America Electronic Components | Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 10,430 | |||
| CLP-105-02-F-D-A-K | Samtec Inc | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator, Socket RoHS : Compliant | 10,017 | |||
AD7672LP10![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQCC28 RoHS : Not Compliant | 8,867 | |||
| CLP-103-02-G-D-BE-A-TR | Samtec Inc | Board Connector, 6 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator RoHS : Compliant | 8,037 | |||
| CLP-103-02-G-D-A-TR | Samtec Inc | Board Connector, 6 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator RoHS : Compliant | 7,267 | |||
| CLP-105-02-F-D-P | Samtec Inc | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 6,859 | |||
| CLP-105-02-G-D-P | Samtec Inc | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 5,266 | |||
| CLP-108-02-G-D | Samtec Inc | Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 4,672 | |||
CLP-105-02-L-D-BE-A-TR![]() | Samtec Inc | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator, Socket RoHS : Compliant | 4,322 | |||
TL75LP10QPWLE![]() | Texas Instruments | Fixed Positive LDO Regulator, 10V, 0.4V Dropout, PDSO20 RoHS : Not Compliant | 3,876 | |||
| CLP-103-02-G-D-A-K-FR | Samtec Inc | Board Connector RoHS : Compliant | 692 | |||
| CLP-103-02-L-D-A | Samtec Inc | Board Connector, 6 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 540 | |||
| CLP-105-02-F-D-A-P-FR | Samtec Inc | Board Connector RoHS : Compliant | 348 | |||
![]() Win Source Electronics | D3V3L2B3LP10-7 | Diodes Incorporated | TVS DIODE 3.3VWM 7VC DFN1010-3 RoHS : Compliant |
| 391,761 | |
| TLP109(TPL.E) | Toshiba America Electronic Components |
| 203,000 | |||
| TLP109TPLET | Toshiba America Electronic Components |
| 184,360 | |||
| TLP109(TPL | Toshiba America Electronic Components |
| 168,000 | |||
| TLP109 | Toshiba America Electronic Components | Optocoupler DC-IN 1-CH Transistor With Base DC-OUT 5-Pin SO Magazine / OPTOISO 3.75KV TRANS 6-SO 5 LEAD RoHS : Compliant |
| 135,000 | ||
| TLP105 | Toshiba America Electronic Components | OPTOISO 3.75KV PSH PULL 6MFSOP-5 |
| 50,000 | ||
| DIO3712LP10 | Dioo Microcircuits Co Ltd | RoHS : Compliant |
| 15,000 | ||
| CLP-102-02-L-D-TR | Samtec Inc | CONN RCPT 4POS 0.05 GOLD SMD RoHS : Compliant |
| 10,000 | ||
CY8C5468AXI-LP106![]() | Cypress Semiconductor | IC MCU 32BIT 256KB FLASH 100TQFP / MCU 32-bit ARM Cortex M3 RISC 256KB Flash 1.8V/3.3V/5V 100-Pin TQFP Tray RoHS : Compliant |
| 1,390 | ||
| HMC7044LP10BE | Analog Devices Inc | IC JITTER ATTENUATOR 68LFCSP RoHS : Compliant |
| 500 | ||
| HMC7044LP10BETR | Analog Devices Inc | IC JITTER ATTENUATOR 68LFCSP RoHS : Compliant |
| 470 | ||
| GLS85LP1002P-S-I-FTE | Greenliant Systems Ltd | RoHS : Compliant |
| 317 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |