 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
LF100ES Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | MLF1005G1R0KT000 | TDK Corporation | - Tape and Reel (Alt: MLF1005G1R0KT000) RoHS : Compliant |
| 10,000 | |
| 440AS031LF1002-4 | Glenair Inc | - Bulk (Alt: 440AS031LF1002-4) RoHS : Not Compliant | 0 | |||
| MLF1005VR15KTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005VR15KTD25) RoHS : Compliant |
| 0 | ||
| MLF1005G1R5KTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005G1R5KTD25) RoHS : Compliant |
| 0 | ||
| 440FJ030LF1003 | Glenair Inc | - Bulk (Alt: 440FJ030LF1003) RoHS : Not Compliant | 0 | |||
| FOXLF100-BAG100 | Fox Electronics | - Bulk (Alt: FOXLF100-BAG100) RoHS : Compliant | 0 | |||
| MLF1005VR18KTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005VR18KTD25) RoHS : Compliant |
| 0 | ||
| FC5AQBCLF10.0-T1 | Fox Electronics | FQ5032A/10/B/C/F/L/1/0/ - Tape and Reel (Alt: FC5AQBCLF10.0-T1) RoHS : Compliant | 0 | |||
| MLF1005GR68JTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005GR68JTD25) RoHS : Compliant |
| 0 | ||
| MLF1005VR27JTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005VR27JTD25) RoHS : Compliant |
| 0 | ||
| MLF1005VR33KTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005VR33KTD25) RoHS : Compliant |
| 0 | ||
| MLF1005VR22KTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005VR22KTD25) RoHS : Compliant |
| 0 | ||
| 440FS031LF1004-4 | Glenair Inc | - Bulk (Alt: 440FS031LF1004-4) RoHS : Not Compliant | 0 | |||
| RLF100-11/18 | ebm-papst | - Bulk (Alt: RLF100-11/18) RoHS : Compliant |
| 0 | ||
| MLF1005GR56JT000 | TDK Corporation | - Tape and Reel (Alt: MLF1005GR56JT000) RoHS : Compliant |
| 0 | ||
 Newark | MLF1005GR56JT000 | TDK Corporation | Multilayer Inductor, 0.56Uh, 0.045A/0402; |Tdk MLF1005GR56JT000 RoHS : Compliant |
| 3,975 | |
| MLF1005GR56JT000 | TDK Corporation | Multilayer Inductor, 0.56Uh, 0.045A/0402; |Tdk MLF1005GR56JT000 RoHS : Compliant |
| 3,975 | ||
| MLF1005G2R2JTD25 | TDK Corporation | Inductor, Aec-Q200, 2.2Uh, 80Mhz, 0402; |Tdk MLF1005G2R2JTD25 RoHS : Compliant |
| 3,872 | ||
| MLF1005G2R2JTD25 | TDK Corporation | Inductor, Aec-Q200, 2.2Uh, 80Mhz, 0402; |Tdk MLF1005G2R2JTD25 RoHS : Compliant |
| 3,872 | ||
CLF10040T-220M-D | TDK Corporation | Inductor, 22Uh, 2.7A, 20%, 100Khz; |Tdk CLF10040T-220M-D RoHS : Compliant |
| 279 | ||
| CLF10040T-220M-D | TDK Corporation | Inductor, 22Uh, 2.7A, 20%, 100Khz; |Tdk CLF10040T-220M-D RoHS : Compliant |
| 279 | ||
| TLF100P4 | Banner Engineering Corp | Signal Tower, 4 Stack, 30Vdc, Cable; No. Of Stacks/Tiers:4; Module Lens Colour:Blue, Green, Red, Yellow; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P4C | Banner Engineering Corp | Signal Tower, 4 Stack, 30Vdc, Cable; No. Of Stacks/Tiers:4; Module Lens Colour:Blue, Green, Red, Yellow; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P3A | Banner Engineering Corp | Signal Tower, 3 Stack, 30Vdc, Cable; No. Of Stacks/Tiers:3; Module Lens Colour:Green, Red, Yellow; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P4CQP | Banner Engineering Corp | Signal Tower, 4 Stack, 30Vdc, Qc; No. Of Stacks/Tiers:4; Module Lens Colour:Blue, Green, Red, Yellow; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P4ACQP | Banner Engineering Corp | Signal Tower, 4 Stack, 30Vdc, Qc; No. Of Stacks/Tiers:4; Module Lens Colour:Blue, Green, Red, Yellow; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P3AKQP | Banner Engineering Corp | Signal Tower, 3 Stack, 30Vdc, Qc; No. Of Stacks/Tiers:3; Module Lens Colour:Multicolor; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Dimming, Flashing; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P3 | Banner Engineering Corp | Signal Tower, 3 Stack, 30Vdc, Cable; No. Of Stacks/Tiers:3; Module Lens Colour:Green, Red, Yellow; Supply Voltage Vac:-; Supply Voltage Vdc:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100Mm Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
| TLF100PDLBGYR | Banner Engineering Corp | Signal Tower, Flashing/Steady, 24V, Bgry; |Banner Engineering TLF100PDLBGYR RoHS : Compliant |
| 1 | ||
| TLF100PDLBGYR | Banner Engineering Corp | Signal Tower, Flashing, Steady, 4 Stack; |Banner Engineering TLF100PDLBGYR RoHS : Compliant |
| 1 | ||
 RS | RLF100-11/14 | ebm-papst | CENTRIFUGAL BLOWER, 24VDC, 127X25MM, FLATPAC, 37.7CFM, 8W, 60DBA, RLF100 SERIES |
| 19 | |
| 17LF100X3/4 | B&B Electronics Manufacturing Company | TIMING PULLEY, 2.03'' PD, 2'' OD, 3/4'' FINISHED BORE, STEEL |
| 3 | ||
| RLF100-11/12/2 | ebm-papst | FAN, RADIAL, 12VDC, 38CFM, 8W, 0.67A, 2550RPM, 127X25.4MM |
| 2 | ||
| RLF100-11/12 | ebm-papst | CENTRIFUGAL BLOWER, 12VDC, 127X25MM, FLATPAC, 37.7CFM, 8W, 60DBA, RLF100 SERIES RoHS : Compliant |
| 1 | ||
| 17LF100X3/4 | Browning (Bearings) | GEARBELT PULLEYS-500 |
| 0 | ||
| 10-KQ2LF10-02N | SMC Corporation of America | FITTING, FEMALE ELBOW, KQ2-N SERIES |
| 0 | ||
| 10-KQ2LF10-04N | SMC Corporation of America | FITTING, FEMALE ELBOW, KQ2-N SERIES |
| 0 | ||
| MGPLF100TF-250Z | SMC Corporation of America | GUIDED CYLINDER, MGP-Z SERIES |
| 0 | ||
| MGPLF100TN-150Z | SMC Corporation of America | CYLINDER, GUIDED, BALL BUSHING, 100MM BORE, MGPL SERIES |
| 0 | ||
| MGGLF100-700-XC83 | SMC Corporation of America | GUIDED CYLINDER, AIR, MGG SERIES |
| 0 | ||
| XLF-100DH4-F7NJZB | SMC Corporation of America | ANGLE VALVE, AIR OPERATED, ALUMINUM, XL SERIES |
| 0 | ||
| MGGLF100-660-XC104 | SMC Corporation of America | GUIDED CYLINDER, AIR, MGG SERIES |
| 0 | ||
| RLF100-11/18/2HP-182 | ebm-papst | CENTRIFUGAL BLOWER, 48VDC, 127X25MM, FLATPAC, 47CFM, 17W, 6400RPM, RLF100 SERIES RoHS : Compliant |
| 0 | ||
| MGGLF100-650-Y7BWL3-XC83 | SMC Corporation of America | GUIDED CYLINDER, AIR, MGG SERIES |
| 0 | ||
| TLF100PDLGGRRQP (813434) | Banner Engineering Corp | TOWER LIGHT, 100MM, PRO EDITOR, 24VDC, MULTICOLOR, QD, TLF100 |
| 0 | ||
 Sager | RLF100-11/18/2HP-182 | ebm-papst | Blowers & Centrifugal Fans Blower, 127x25mm, 48VDC, 47.1CFM, 17W, 6400RPM, Ball, Open Collector Tach/PWM RoHS : Compliant |
| 0 | |
| LF1005-S/SP54 | LEM Holdings SSA | CURRENT TRANSDUCER, IPN = 1000, MECHANICAL MOUNT = PANEL | 0 | |||
| LF1005-S/SP51 | LEM Holdings SSA | CURRENT TRANSDUCER, IPN = 1000, MECHANICAL MOUNT = PANEL | 0 | |||
| M15CLF1006E2 | ABB Group | MLD CURRENT LIMITING FUSE |
| 0 | ||
| M25CLF100-6E6 | ABB Group | MOLDED CL FUSE 15.5KV 100A 600A BSH |
| 0 | ||
| MO5CLF10022CS1596 | ABB Group | Thomas & Betts |
| 0 | ||
| M25CLF100 | ABB Group | MOLDED FUSE 25KV 100 AMPS |
| 0 | ||
| LF1005-S/SP31 | LEM Holdings SSA | Industrial Current Sensors | 0 | |||
| BFG.LF.100.XAZ | LEMO connectors | Circular Push Pull Connectors PLUG CAP RoHS : Compliant | 0 | |||
| M25CLF100-22-WMB-CS8 | ABB Group | MOLD FUSE25KV 100A 2-200WELL WALLMT |
| 0 | ||
| M25CLF100-6E6-SMB | ABB Group | MLD CURRENT LIMITING FUSE |
| 0 | ||
| CZ700LF-100 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding COOLZORB-700LF 2.5mm - 12*12*.100in | 0 | |||
| M25CLF1006E2SMB1955 | ABB Group | MOLDED CLF 15.5KV 100A SMB |
| 0 | ||
| LF1005-S/SP55 | LEM Holdings SSA | CURRENT TRANSDUCER, IPN = 1000, MECHANICAL MOUNT = PANEL | 0 | |||
| RLF100-11/18 | ebm-papst | Blowers & Centrifugal Fans Radial Blower, 127x127x25mm, 48VDC, 37.7CFM, 8.6W, 5100RPM, Ball, FlatPak |
| 0 | ||
 TME | SCW-SC3LF-100R-F | TT Electronics plc | Resistor: thick film; 100Ω; 1225; 3W; ±1%; SC3; -55÷150°C |
| 3,600 | |
| FLF-100B | FerroCore | Ferrite: two-piece; on round cable; Ø: 10mm; 80Ω; A: 25.5mm; C: 10mm |
| 2,504 | ||
| MLF1005VR47JT000 | TDK Corporation | Inductor: ferrite; SMD; 0402; 470nH; 120mA; R: 950mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 1,668 | ||
| 0102CDLF100C/SB | Ersa GmbH | Tip; chisel; 10mm; for soldering iron,for soldering station |
| 27 | ||
| KQ2LF10-03A | SMSC | Push-in fitting; threaded,angled 90°; -1÷10bar; Thread: Rc 3/8" |
| 3 | ||
| 0242CDLF100/SB | Ersa GmbH | Tip; chisel; 10mm; for soldering iron |
| 0 | ||
| LD-ALF100-27W | GTV Poland | LED lamp; E27; neutral white; 230VAC; 2900lm; 27W; 200°; 4000K |
| 0 | ||
| LF1000 LA53 NX | EQUIP-TEST | Test probe: ICT/FCT; 5A; Ø: 0.91mm; steel; Blade tip shape: head LA |
| 0 | ||
| MLF1005G1R5JTD25 | TDK Corporation | Inductor: ferrite; SMD; 0402; 1.5uH; 35mA; R: 950mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
| MLF1005VR33JTD25 | TDK Corporation | Inductor: ferrite; SMD; 0402; 330nH; 140mA; R: 1.05Ω; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
| MLF1005GR39JTD25 | TDK Corporation | Inductor: ferrite; SMD; 0402; 390nH; 50mA; R: 410mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
| MLF1005G1R2JTD25 | TDK Corporation | Inductor: ferrite; SMD; 0402; 1.2uH; 35mA; R: 790mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
| MLF1005G2R2JT000 | TDK Corporation | Inductor: ferrite; SMD; 0402; 2.2uH; 30mA; R: 1.3Ω; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
| MLF1005GR68JTD25 | TDK Corporation | Inductor: ferrite; SMD; 0402; 680nH; 45mA; R: 550mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
| MLF1005VR27JTD25 | TDK Corporation | Inductor: ferrite; SMD; 0402; 270nH; 150mA; R: 910mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | CLF10060NIT-150M-D | TDK Corporation | RoHS : Compliant | 2,500 | ||
 ComSIT USA | CLF10040T220MH | TDK Corporation | General Purpose Inductor, 22uH, 20%, 1 Element, SMD, 3938 RoHS : Compliant | 4,800 | ||
| CLF10040T470M | TDK Corporation | INDUCTOR FOR POWER CIRCUITS General Purpose Inductor RoHS : Compliant | 2,400 | |||
| VLF10045T101M1R3 | TDK Corporation | SMD INDUCTOR FOR POWER LINE General Purpose Inductor, 100uH, 20%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 785 | |||
 Interstate Connecting Components | 440AS031LF1002-4 | Glenair Inc | RoHS : Not Compliant | 0 | ||
| 370DS002LF1006H3 | Glenair Inc | ENVIRO BS DIRECT COUPLING | 0 | |||
| 440FJ030LF1003 | Glenair Inc | 0 | ||||
| HVSLF10082C002 | Amphenol PCD | HVSLF180 2 POLE RA PLUG WITHOU | 0 | |||
| HVSLF10062A002 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| HVSLF10062A101 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| 440FS031LF1004-4 | Glenair Inc | 0 | ||||
| HVSLF10062B002 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| HVSLF10082A101 | Amphenol PCD | HVSLF180 2 POLE RA PLUG WITH H | 0 | |||
| HVSLF10062C102 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| HVSLF10082B002 | Amphenol PCD | HVSLF180 2 POLE RA PLUG WITHOU | 0 | |||
| HVSLF10062A001 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| 440FS031LF1003-4 | Glenair Inc | 0 | ||||
| HVSLF10022C001 | Amphenol PCD | HVSLF10 2 POLE BOX MOUNT RECEP | 0 | |||
| HVSLF10062B102 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
 PEI Genesis | ELF1-0000-0001 | Amphenol Corporation |
| 0 | ||
 Chip 1 Exchange | CLF10040T-330M-D | TDK Corporation | INSTOCK RoHS : Compliant | 6,633 | ||
| CLF10040T-100M-H | TDK Corporation | INSTOCK | 200 | |||
| MLF1005VR22JTD25 | TDK Corporation | INSTOCK RoHS : Compliant | 105 | |||
| CLF10060NIT-6R8N-D | TDK Corporation | INSTOCK RoHS : Compliant | 5 | |||
 Avnet Abacus | MLF1005GR82JTD25 | TDK Corporation | Multilayer Inductor AECQ200 SHLD 082 H 059 ohm 130 MHz 40 mA 0402 1005 Metric (Alt: MLF1005GR82JTD25) RoHS : Compliant | 190,000 | ||
| MLF1005G1R0KT000 | TDK Corporation | (Alt: MLF1005G1R0KT000) RoHS : Compliant | 10,000 | |||
| RLF 100-11/12 | ebm-papst | Fan Blower Centrifugal 12 VDC DC 127 mm 25 mm 377 CFM (Alt: 9593507051) RoHS : Compliant | 0 | |||
| CLF10040T-220M | TDK Corporation | Power Inductor SMD 22 uH 20 22 A Shielded 27 A 10mm x 97mm x 38mm (Alt: CLF10040T-220M) RoHS : Compliant | 0 | |||
| CLF10040T-150M | TDK Corporation | Power Inductor SMD 15 uH 20 25 A Shielded 32 A 10mm x 97mm x 38mm (Alt: CLF10040T-150M) RoHS : Compliant | 0 | |||
| MLF1005G1R2JT000 | TDK Corporation | Multilayer Inductor 12 uH 450 Milliohm 5 230 MHz 35 mA 0402 1005 Metric (Alt: MLF1005G1R2JT000) RoHS : Compliant | 0 | |||
| CLF10040T-331M-D | TDK Corporation | Power Inductor SMD 330 uH 20 530 mA Shielded 700 mA 10mm x 97mm x 38mm (Alt: CLF10040T-331M-D) RoHS : Compliant | 0 | |||
| MLF1005VR15KT000 | TDK Corporation | MLF1005VR15KT000 (Alt: MLF1005VR15KT000) RoHS : Compliant | 0 | |||
| CLF10040T-2R2N-D | TDK Corporation | Power Inductor SMD 22 uH 30 5 A Shielded 75 A 10mm x 97mm x 38mm (Alt: CLF10040T-2R2N-D) RoHS : Compliant | 0 | |||
| CLF10040T-6R8N-D | TDK Corporation | Power Inductor SMD 68 uH 30 37 A Shielded 48 A 10mm x 97mm x 38mm (Alt: CLF10040T-6R8N-D) RoHS : Compliant | 0 | |||
| CLF10040T-100M-D | TDK Corporation | Power Inductor SMD 10 uH 20 33 A Shielded 4 A 10mm x 97mm x 38mm (Alt: CLF10040T-100M-D) RoHS : Compliant | 0 | |||
| CLF10040T-3R3N-D | TDK Corporation | Power Inductor SMD 33 uH 30 48 A Shielded 66 A 10mm x 97mm x 38mm (Alt: CLF10040T-3R3N-D) RoHS : Compliant | 0 | |||
| VLF10045T-331MR70 | TDK Corporation | Power Inductor SMD 330 uH 20 800 mA Shielded 700 mA 10mm x 97mm x 45mm (Alt: VLF10045T-331MR70) RoHS : Compliant | 0 | |||
| CLF10060NIT-150M-D | TDK Corporation | Power Inductor SMD 15 uH 20 41 A Shielded 44 A 101mm x 10mm x 6mm (Alt: CLF10060NIT-150M-D) RoHS : Compliant | 0 | |||
| FOX801BELF-100-BULK | Abracon Corporation | VCTCXO SMD Low Profile 10 MHz 3V Clipped Sine 3075C (Alt: FOX801BELF-100-BULK) RoHS : Compliant | 0 | |||
Avnet Asia | LF1005-NR77NBAT/LF | Advanced Ceramic X Corporation | ADOLF1005-NR77NBAT/LF LOW PASS FILTER,10 (Alt: LF1005-NR77NBAT/LF) RoHS : Compliant | 0 | ||
| LF1005-W2R5NBAT/LF | Advanced Ceramic X Corporation | ADOLF1005-W2R5NBAT/LF LOW PASS FILTER,25 (Alt: LF1005-W2R5NBAT/LF) RoHS : Compliant | 0 | |||
| MLF1005GR82JTD25 | TDK Corporation | (Alt: MLF1005GR82JTD25) RoHS : Compliant | 0 | |||
| MLF1005VR18JT000 | TDK Corporation | (Alt: MLF1005VR18JT000) RoHS : Compliant | 0 | |||
 Master Electronics | TL1105LF100Q | E-Switch Inc | Switch Tactile N.O. SPST Round Button PC Pins 0.05A 12VDC 0.98N Thru-Hole RoHS : Compliant |
| 4,000 | |
| RLF100-11/18 | ebm-papst | DC Blower Centrifugal Ball Bearing 48V 36V to 60V 37.7CFM 60dB RoHS : Compliant |
| 112 | ||
| RLF100-11/12/2 | ebm-papst | DC Fan Ball Bearing 12V 18.6W 6400RPM 47.1CFM 7.5dBA Flange Mount RoHS : Compliant |
| 112 | ||
| RLF100-11/18/2HP-182 | ebm-papst | Fan Blower - Centrifugal - 48VDC - 127mm x 127mm x 25mm - 47 CFM - 6400 RPM. RoHS : Compliant |
| 110 | ||
| RLF100-11/14/19 | ebm-papst | Fan Blower - Centrifugal - 24VDC - 127mm x 127mm x 25.40mm - 37.7 CFM (1.06m³/min) - 5100 RPM - IP20 - 3 Wire Leads. RoHS : Compliant |
| 49 | ||
| WCR0402LF1003FPLT | TT Electronics Resistors | General Purpose Chip Resistor - 100 kOhms ±1% - 0.063W - ±100ppm/°C - 0402 - Tape&Reel RoHS : Compliant |
| 0 | ||
| SCW-SC3LF-100R-F | TT Electronics Resistors | RoHS : Compliant |
| 0 | ||
| SL-F1000 | Panasonic Electronic Components | RoHS : Compliant |
| 0 | ||
| EMLF100ADA330ME73G | United Chemi-Con Inc | Series: Mlf; Volt: 10; Cap: 33; Dia X Length: 5X7; Packaging: Taped RoHS : Compliant |
| 0 | ||
| WCR-WCR1206LF-1002-F-P-LT | TT Electronics Resistors | General Purpose Surface Mount Resistor - 10 kohms ±1% - 0.25W - ±200ppm/°C - 1206 RoHS : Compliant |
| 0 | ||
| EMLF100ADA221MHA0G | United Chemi-Con Inc | Series: Mlf; Volt: 10; Cap: 220; Dia X Length: 8X10; Packaging: Taped RoHS : Compliant |
| 0 | ||
| WCR-WCR0402LF-1000-F | TT Electronics Resistors | General Purpose Chip Resistor - 100 Ohms ±1% - 0.063W - ±100ppm/°C - 0402 - Tape&Reel RoHS : Compliant |
| 0 | ||
| US-PML-F100-(D50) | Phoenix Contact | Label - for marking fire detection systems - Card - red/white - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: adhesive - diameter: 50 mm - lettering field size: d: 50 mm - Number of individual labels: 4 RoHS : Compliant |
| 0 | ||
| WCR-WCR0805LF-1001-F-P-LT | TT Electronics Resistors | General Purpose Surface Mount Resistor - 1 kohms ±1% - 0.125W - ±200ppm/°C - 0805 RoHS : Compliant |
| 0 | ||
| US-PML-F100-(50X25) | Phoenix Contact | Label - for marking fire detection systems - Card - red/white - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: adhesive - diameter: 0 mm - lettering field size: 40 x 15 mm - Number of individual labels: 10 RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C6658LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SMA Male to SMA Male Right Angle Low Loss Cable 100 CM Length Using LMR-240 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable 100 cm length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 100 cm length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has male gender on end 1 and male on end 2. PE3C6658LF-100CM can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0 inches diameter has copper as cable inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.500 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA plug cable assembly PE3C6658LF-100CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has crimp/non-solder contact attachment method and brass body with tri-metal plating.Additional dimensions, specifications and CAD drawings for this PE3C6658LF-100CM low loss RF cable are available on our downloadable PDF datasheet.PE3C6658LF-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA low loss RF cable assembly as per your requirements. |
| 2,851 | |
| PE3C1349LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to BNC Male Cable 39.37 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly N male to BNC male cable 39.37 inch length using LMR-195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 39.37 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3C1349LF-100CM, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3C1349LF-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1349LF-100CM can also be used in the other direction and will be BNC male to N type male cable assembly if the opposite connectivity is required. N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 39.37 inch length using LMR-195 coax, LF solder. |
| 1,758 | ||
| PE3W02683LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Male Right Angle Cable 100 CM Length Using LMR-240 Coax, LF Solder., Radio frequency assembly N male to N male right angle cable 100 cm length using LMR-240 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle cable 100 cm length using LMR-240 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3W02683LF-100CM, can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W02683LF-100CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02683LF-100CM can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 100 cm length using LMR-240 coax, LF solder. |
| 1,602 | ||
| PE3W07862LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity TNC Male to N Female Low Loss Cable 100 cm Length Using LMR-195 Coax, LF Solder., Radio frequency assembly reverse polarity TNC male to N female low loss cable 100 cm length using LMR-195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Reverse polarity TNC male to N female low loss cable 100 cm length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity TNC cable connection on one end and type N cable connection on the other. Our low loss reverse polarity TNC to N type cable assemblies have a male gender on end 1 and female on end 2. This reverse polarity TNC to N type cable is a male to female coax assembly, PE3W07862LF-100CM, can also be known as a low loss reverse polarity TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to type N jack cable assembly PE3W07862LF-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency reverse polarity TNC male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07862LF-100CM can also be used in the other direction and will be N type female to reverse polarity TNC male cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to N female low loss cable 100 cm length using LMR-195 coax, LF solder. |
| 985 | ||
| PE3C2679LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to MCX Plug Right Angle Cable 100 CM Length Using PE-SR405FLJ Coax, LF Solder., Radio frequency assembly SMA male to MCX plug right angle cable 100 cm length using PE-SR405FLJ coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MCX plug right angle cable 100 cm length using PE-SR405FLJ coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MCX cable is a male to plug coax assembly, PE3C2679LF-100CM, can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3C2679LF-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2679LF-100CM can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 100 cm length using PE-SR405FLJ coax, LF solder. |
| 144 | ||
| PE3W08650LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Female Cable 100 cm Using RG405 Coax, LF Solder., Radio frequency assembly SMA male to SMA female cable 100 cm using RG405 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 100 cm using RG405 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3W08650LF-100CM, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3W08650LF-100CM is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08650LF-100CM can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 100 cm using RG405 coax, LF solder. |
| 61 | ||
| PE3C3156LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Water Blue FAKRA Jack to FAKRA Jack Low Loss Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly water blue FAKRA jack to FAKRA jack low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack to FAKRA jack low loss cable 100 cm length using LMR-100 coax, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. PE3C3156LF-100CM can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE3C3156LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to FAKRA jack low loss cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3W08203LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. MCX Plug to SMA Female Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly MCX plug to SMA female cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to SMA female cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and SMA cable connection on the other. Our MCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MCX to SMA cable is a plug to female coax assembly, PE3W08203LF-100CM, can also be known as a MCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MCX male to SMA jack cable assembly PE3W08203LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MCX plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08203LF-100CM can also be used in the other direction and will be SMA female to MCX plug cable assembly if the opposite connectivity is required. MCX male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to SMA female cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3W02061LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Male to N Female Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly TNC male to N female cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to N female cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and type N cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3W02061LF-100CM, can also be known as a TNC plug to N type jack cable assembly and will be shipped same-day as it is purchased. TNC plug to type N jack cable assembly PE3W02061LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2 GHz maximum frequency TNC male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02061LF-100CM can also be used in the other direction and will be N type female to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3W03671LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to TNC Male Right Angle Cable 100 cm Length Using RG223 Coax, LF Solder., Radio frequency assembly SMA male right angle to TNC male right angle cable 100 cm length using RG223 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to TNC male right angle cable 100 cm length using RG223 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3W03671LF-100CM, can also be known as a right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W03671LF-100CM is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03671LF-100CM can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle cable 100 cm length using RG223 coax, LF solder. |
| 0 | ||
| PE3W02707LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female Bulkhead to SMA Male Low Loss Cable 100 cm Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N female bulkhead to SMA male low loss cable 100 cm length using LMR-400 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to SMA male low loss cable 100 cm length using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. This type N to SMA cable is a female to male coax assembly, PE3W02707LF-100CM, can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. N type jack to SMA plug cable assembly PE3W02707LF-100CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02707LF-100CM can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 100 cm length using LMR-400 coax, LF solder. |
| 0 | ||
| PE3W02909LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMB Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMA male to SMB plug right angle low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB plug right angle low loss cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMB cable connection on the other. Our low loss SMA to right angle SMB cable assembly has a male gender on end 1 and a plug on end 2. PE3W02909LF-100CM can also be known as a low loss SMA plug to right angle SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02909LF-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMB plug cable has a maximum VSWR of 1.4:1. SMA plug to SMB male cable assembly PE3W02909LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02909LF-100CM can also be used in the other direction and will be a right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3481LF-100CM | Pasternack Enterprises |
| 0 | |||
| PE3W00474LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Female Bulkhead to SMP Female Cable 100 cm Length Using PE-SR405FL Coax, LF Solder., Radio frequency assembly SMA female bulkhead to SMP female cable 100 cm length using PE-SR405FL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female cable 100 cm length using PE-SR405FL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W00474LF-100CM, can also be known as a SMA jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W00474LF-100CM is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00474LF-100CM can also be used in the other direction and will be SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female cable 100 cm length using PE-SR405FL coax, LF solder. |
| 0 | ||
| PE3C3045LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Female to Water Blue FAKRA Jack Low Loss Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMA female to water blue FAKRA jack low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to water blue FAKRA jack low loss cable 100 cm length using LMR-100 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. PE3C3045LF-100CM can also be known as a low loss SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE3C3045LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3045LF-100CM can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to water blue FAKRA jack low loss cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
 Vyrian | CLF10040T-680M-D | TDK Corporation | General Purpose Inductor, 68uH, 20%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 15,981 | ||
| CLF10040T-1R0N-D | TDK Corporation | General Purpose Inductor, 1uH, 30%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 12,791 | |||
| AD6674-LF1000EBZ | Analog Devices Inc | RoHS : Compliant | 11,797 | |||
| CLF10060NIT-221M-D | TDK Corporation | General Purpose Inductor, 220uH, 20%, 1 Element, Ferrite-Core, SMD, 4039 RoHS : Compliant | 11,362 | |||
| VLF10045T-2R2N7R4 | TDK Corporation | General Purpose Inductor, 2.2uH, 30%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 10,637 | |||
| AD9680-LF1000EBZ | Analog Devices Inc | RoHS : Compliant | 9,359 | |||
| AD9234-LF1000EBZ | Analog Devices Inc | RoHS : Compliant | 7,685 | |||
| CLF10040T-100M-D | TDK Corporation | General Purpose Inductor, 10uH, 20%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 2,832 | |||
| VLF10045T-6R8N5R1 | TDK Corporation | General Purpose Inductor, 6.8uH, 30%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 569 | |||
 Win Source Electronics | VLF10045T-4R7N6R1 | TDK Corporation | SMD Inductors(Coils) For Power Line(Wound, Magnetic Shielded) | FIXED IND 4.7UH 6.1A 15 MOHM SMD RoHS : Compliant |
| 80,000 | |
| CLF10060NIT-100M-D | TDK Corporation | FIXED IND 10UH 3.6A 20.4MOHM SMD RoHS : Compliant |
| 19,040 | ||
| CLF10060NIT-2R2N-D | TDK Corporation | FIXED IND 2.2UH 8.5A 9.23MOHM SM RoHS : Compliant |
| 7,220 | ||
| CLF10040T-470M | TDK Corporation | FIXED IND 47UH 1.3A 150 MOHM SMD RoHS : Compliant |
| 4,800 | ||
| LF 1005-S/SP16 | LEM Holdings SSA | LF 1005-S/SP16 / Current Sensor Channel |
| 360 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand