| Electronic Components Datasheet Search |
|
L12-150-R0 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | RL1218JK-070R15L | YAGEO Corporation | Resistor: thick film; 150mΩ; SMD; 1218; 1W; ±5%; RL; 3.05x4.6x0.55mm RoHS : Compliant |
| 8,000 | |
| MK22FN1M0VLL12 | NXP Semiconductors | IC: ARM microcontroller; LQFP100; Architecture: ARM,Cortex M4 RoHS : Compliant |
| 130 | ||
| R-FF1-N-08L120 | Rawplug | Plastic anchor; with screw; 8x120; zinc-plated steel; FF1; 50pcs. |
| 15 | ||
IS61C3216AL-12KLI![]() | Integrated Silicon Solution Inc | IC: SRAM memory; 512kbSRAM; 32kx16bit; 5V; 12ns; SOJ44; parallel RoHS : Compliant |
| 12 | ||
| 16.109L124 | Italtronic srl | Enclosure: panel; X: 96mm; Y: 48mm; Z: 124mm; ABS,polycarbonate,PPO |
| 0 | ||
| S25FL128SAGMFIR10 | Infineon Technologies AG | IC: FLASH memory; 128MbFLASH; QUAD SPI; 133MHz; 2.7÷3.6V; SOIC16 RoHS : Compliant |
| 0 | ||
| S25FL128SDSMFB001 | Infineon Technologies AG | IC: FLASH memory; 128MbFLASH; QUAD SPI; 80MHz; 2.7÷3.6V; SOIC16 RoHS : Compliant |
| 0 | ||
| BL4SRL1299ZXW-13 | Amphenol Corporation | Cable holder; size 13; MIL-DTL-38999 Series III; straight |
| 0 | ||
| AMSRL1-2412ZTR | Aimtec | Converter: DC/DC; 12W; Uin: 9÷36VDC; Uout: 12VDC; Iout: 1A; SMT; OUT: 1 RoHS : Compliant |
| 0 | ||
| MT25QL128ABA8E12-0AAT | Micron Technology Inc | IC: FLASH memory; 128MbFLASH; SPI; 133MHz; 2.7÷3.6V; serial RoHS : Compliant |
| 0 | ||
| MT25QL128ABA8E12-0SIT TR | Micron Technology Inc | IC: FLASH memory; 128MbFLASH; Quad I/O,SPI; 16Mx8bit; 133MHz |
| 0 | ||
| MT25QL128ABA8ESF-0SIT | Micron Technology Inc | IC: FLASH memory; 128MbFLASH; Quad I/O,SPI; 16Mx8bit; 133MHz RoHS : Compliant |
| 0 | ||
| XCKML121 | Telemechanique Sensors | Limit switch |
| 0 | ||
| WSL1206R1500FEA | Vishay Intertechnologies | Resistor: metal strip; 150mΩ; current shunt,sensing; SMD; 1206 RoHS : Compliant |
| 0 | ||
| ITV9550L1230MR | Littelfuse Inc | Fuse: fuse; SMD; 30A; 12V RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | WSL120600000ZEA9 | Vishay Intertechnologies | Zero Ohm Resistor, Jumper, 1206 [3216 Metric], Metal Strip, 65 A, Surface Mount Device - Tape and Reel (Alt: WSL120600000ZEA9) RoHS : Compliant |
| 32,000 | |
| WSL12063L000FEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSL12063L000FEA) RoHS : Compliant |
| 24,000 | ||
| WSL1206R0500FEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSL1206R0500FEA) RoHS : Compliant |
| 20,000 | ||
| WSL12061L000FEA18 | Vishay Intertechnologies | - Tape and Reel (Alt: WSL12061L000FEA18) RoHS : Compliant |
| 16,000 | ||
| WSL1206R0200FEA18 | Vishay Intertechnologies | - Tape and Reel (Alt: WSL1206R0200FEA18) RoHS : Compliant |
| 16,000 | ||
| RL1206JR-070R15L | YAGEO Corporation | SMD Current Sense Resistor, 0.15 ohm, RL Series, 1206 [3216 Metric], 250 mW, ? 5%, Thick Film - Tape and Reel (Alt: RL1206JR-070R15L) RoHS : Compliant |
| 15,000 | ||
MC78L12ABDR2G![]() | onsemi | Linear Voltage Regulator, 100 mA, 5 to 24 V, Positive Vout: 12.0 V; TJ = -40?C to +125?C. - Tape and Reel (Alt: MC78L12ABDR2G) RoHS : Compliant |
| 12,500 | ||
| MK22FN256VLL12R | NXP Semiconductors | - Tape and Reel (Alt: MK22FN256VLL12R) RoHS : Compliant |
| 11,000 | ||
| RL1206FR-070R47L | YAGEO Corporation | SMD Current Sense Resistor, 0.47 ohm, RL Series, 1206 [3216 Metric], 250 mW, ? 1%, Thick Film - Tape and Reel (Alt: RL1206FR-070R47L) RoHS : Compliant |
| 5,000 | ||
| WSL1206R1500FEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSL1206R1500FEA) RoHS : Compliant |
| 4,000 | ||
| CL-120A | Amphenol Corporation | - Bulk (Alt: CL-120A) RoHS : Compliant |
| 2,000 | ||
| MT25QL128ABA8ESF-0SIT | Micron Technology Inc | Flash Memory, Serial NOR, 128 Mbit, 16M x 8bit, SPI, 16 Pins, SOIC W - Trays (Alt: MT25QL128ABA8ESF-0SIT) RoHS : Compliant | 325 | |||
| S25FL128SAGBHIA00 | Infineon Technologies AG | Flash Memory, MirrorBit Eclipse Architecture, Serial NOR, 128 Mbit, 16M x 8bit, SPI, BGA, 24 Pins - Trays (Alt: S25FL128SAGBHIA00) RoHS : Compliant |
| 79 | ||
| SFML-120-02-S-D-LC | Samtec Inc | - Rail/Tube (Alt: SFML-120-02-S-D-LC) RoHS : Compliant |
| 58 | ||
| MS3474L12-10S | Amphenol Corporation | - Bulk (Alt: MS3474L12-10S) RoHS : Not Compliant |
| 40 | ||
![]() Newark | WSL1206R0300FEA18 | Vishay Intertechnologies | Resistor, 0R03, 1%, Metal Strip, Smd; |Vishay WSL1206R0300FEA18 RoHS : Compliant |
| 7,001 | |
| WSL1206R0300FEA18 | Vishay Intertechnologies | Resistor, 0R03, 1%, Metal Strip, Smd; |Vishay WSL1206R0300FEA18 RoHS : Compliant |
| 7,001 | ||
| RL1206FR-7W0R56L | YAGEO Corporation | Res, 0R56, 1%, 0.5W, 1206, Thick Film; |Yageo RL1206FR-7W0R56L RoHS : Compliant |
| 5,646 | ||
| RL1206FR-7W0R56L | YAGEO Corporation | Res, 0R56, 1%, 0.5W, 1206, Thick Film; |Yageo RL1206FR-7W0R56L RoHS : Compliant |
| 5,646 | ||
| RL1206FR-7W0R56L | YAGEO Corporation | Res, 0R56, 1%, 0.5W, 1206, Thick Film; |Yageo RL1206FR-7W0R56L RoHS : Compliant |
| 5,000 | ||
| RL1206FR-7W0R56L | YAGEO Corporation | Curr Sense Res Smd, 0R56, 500Mw; |Yageo RL1206FR-7W0R56L RoHS : Compliant |
| 5,000 | ||
| WSL1206R1500FEA | Vishay Intertechnologies | Curr Sense Res Smd, 0R15, 250Mw; |Vishay WSL1206R1500FEA RoHS : Compliant |
| 4,000 | ||
| SML-LXL1206GC-TR | ITW Lumex | Led, Green, 1.1Mm, 20Mcd, 565Nm; |Lumex SML-LXL1206GC-TR RoHS : Compliant |
| 2,143 | ||
| SML-LXL1206GC-TR | ITW Lumex | Led, Green, 1.1Mm, 20Mcd, 565Nm; |Lumex SML-LXL1206GC-TR RoHS : Compliant |
| 2,143 | ||
| 3L12-135 | White-Rodgers | Rollout Safety Switch, Spst, 15A/120Vac; Switching Temperature:-; Reset Temperature:135°C; Contact Operation:Normally Closed; Sensor Terminals:Quick Connect; Sensor Housing:Flange Mount; Contact Rating:15A At 120Vac, 10A At 240Vac |White Rodgers 3L12-135 RoHS : Not Compliant |
| 840 | ||
| WSL12061L000FEA18 | Vishay Intertechnologies | Curr Sense Res Smd, 0R001, 500Mw; |Vishay WSL12061L000FEA18 RoHS : Compliant |
| 825 | ||
| WSL12061L000FEA18 | Vishay Intertechnologies | Curr Sense Res Smd, 0R001, 500Mw; |Vishay WSL12061L000FEA18 RoHS : Compliant |
| 825 | ||
| SDL-123-T-10 | Samtec Inc | ".100" Low Profile Double Row Screw Mach; |Samtec, Inc. SDL-123-T-10 RoHS : Not Compliant |
| 141 | ||
| BK4SRL12079XY | Amphenol Limited | Bandlock, Mil-C 38999, 13-C; |Amphenol Ltd BK4SRL12079XY RoHS : Compliant |
| 49 | ||
| BR816L125FGP | Eaton Cutler-Hammer | 1Ph/Br Lc 125A Mlo 8/16 Cir Al, flsh; |Eaton Cutler Hammer BR816L125FGP RoHS : Not Compliant |
| 9 | ||
![]() RS | OL1215E (OL1215E-R52) | Ohmite Mfg Co | RESISTOR, CARBON FILM, RES 120 OHMS, PWR-RTG 0.5 W, TOL 5%, AXIAL, CER-CORE |
| 5,107 | |
| LTILA51-6S-BL-RC-NBL/125N (RLL-48308400 | LTILA51-6S-BL-RC-NBL/125N | LTILA516SB | Carling Technologies | SWITCH;ROCKER;SP;ON-NONE-OFF;CURVED;GLOSS;BLK;ILLUM;125V NEON;RED;15A;125VAC;QC |
| 1,131 | ||
| LTILA51-6S-BL-AM-NBL/125N/INDP (RLL-49226512|LTILA51-6S-BL-AM-NBL/125N/INDP|LTIL | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 995 | ||
| LTILA71-6S-WH-RC-NBL/125N (RLL-48660500 | LTILA71-6S-WH-RC-NBL/125N | LTILA716SW | Carling Technologies | SWITCH, ROCKER, SP, ON-NONE-OFF, CURVED, GLOSS, BLK, ILLUM,125V NEON, RED,12A,250VAC, QC |
| 286 | ||
| SWS600L-12 (SWS600L12) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,12V,53A,100-265V IN, ENCLOSED, PNL MNT, EMBEDDED,636W, SWS SERIES |
| 65 | ||
| L12D1S001-AZZ00-000 (RCL-00000295 | L12D1S001-AZZ00-000 | L12D1S001AZZ00000) | Carling Technologies | SWITCH, SPST, 15A, 125VC, (ON) NONE OFF, SILVER-NICKEL, SILVER TIN-OXIDE, GOLD |
| 64 | ||
| MDL-1/2-R (MDL-1-2-R) | Eaton Electronics | TIME DELAY FUSE, 0.5 A, 250 V, 6.3X32 MM, GLASS |
| 20 | ||
| E2E-X4C1L12-M1 (E2EX4C1L12M1) | OMRON Industrial Automation | INDUCTIVE PROXIMITY SENSOR, 3-WIRE, M12 4MM, NPN/NO, LONG, E2E NEXT SERIES |
| 4 | ||
| E2E-X2B1DL12-M1 (E2EX2B1DL12M1) | OMRON Industrial Automation | INDUCTIVE PROXIMITY SENSOR, 3-WIRE, DC, M12 2MM, PNP/NO, LONG, E2E NEXT SERIES |
| 4 | ||
| L12D1EHN1-A7900-000 (RCL-00010075 | L12D1EHN1-A7900-000 | L12D1EHN1A7900000) | Carling Technologies | SWITCH, SPST, 20 A, 12, (ON) NONE OFF, SILVER-NICKEL, SILVER TIN-OXIDE, GOLD |
| 4 | ||
| ML12C1PS2 (ML12C1HS2) | IKO International Inc | STAINLESS STEEL MINIATURE LINEAR WAY, C-LUBE MAINTENANCE FREE, STANDARD LENGTH |
| 2 | ||
| CFSH12BL12 (US2:CFSH12BL12) | Siemens | OEM DSCNCT & ACCS CFS SWITCHES, US2:CFSH12BL12 |
| 2 | ||
| E2E-X5MC1L12-M1 (E2EX5MC1L12M1) | OMRON Industrial Automation | INDUCTIVE PROXIMITY SENSOR, 3-WIRE, M12 5MM, NPN/NO, LONG, E2E NEXT SERIES |
| 2 | ||
| LTILA61-6S-BL-AM-NBL/125N (RLL-48545800|LTILA61-6S-BL-AM-NBL/125N|LTILA616SBLAMN | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 2 | ||
| L12 | Apex Tool Group LLC | XCELITE, NUTDRIVER,3/8 IN. X 6 IN. EXTRA LONG - FULL HOLLOW SHAFT ,AMBER HANDLE |
| 0 | ||
![]() STMicroelectronics | L78L12ACUTR![]() | STMicroelectronics | Positive voltage regulators RoHS : Compliant |
| 15,350 | |
L78L12ACZ-TR![]() | STMicroelectronics | Positive voltage regulators RoHS : Compliant |
| 8,391 | ||
| STL125N10F8AG | STMicroelectronics | Automotive N-channel 100 V, 4.6 mOhm max., 125 A STripFET F8 Power MOSFET in a PowerFLAT 5x6 package |
| 7,089 | ||
| STL120N8F7 | STMicroelectronics | N-channel 80 V, 4.0 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package RoHS : Compliant |
| 6,875 | ||
L78L12ABZ![]() | STMicroelectronics | Positive voltage regulators RoHS : Compliant |
| 5,808 | ||
L78L12ACZ-AP![]() | STMicroelectronics | Positive voltage regulators RoHS : Compliant |
| 3,889 | ||
| STL12N60M2 | STMicroelectronics | N-channel 600 V, 0.400 Ohm typ., 6.5 A MDmesh M2 Power MOSFET in PowerFLAT 5x6 HV package RoHS : Compliant |
| 3,343 | ||
L78L12ABD-TR![]() | STMicroelectronics | Positive voltage regulators RoHS : Compliant |
| 2,925 | ||
| STL125N8F7AG | STMicroelectronics | Automotive N-channel 80 V, 3.6 mOhm typ., 120 A, STripFET F7 Power MOSFET in a PowerFLAT 5x6 package RoHS : Compliant |
| 988 | ||
BUL1203E![]() | STMicroelectronics | High voltage fast-switching NPN power transistor RoHS : Compliant |
| 906 | ||
| STL120N10F8 | STMicroelectronics | N-channel 100 V, 4.6 mOhm max., 125 A STripFET F8 Power MOSFET in a PowerFLAT 5x6 package RoHS : Compliant |
| 283 | ||
| STL12N65M2 | STMicroelectronics | N-channel 650 V, 0.62 Ohm typ., 5 A MDmesh M2 Power MOSFET in a PowerFLAT 5x6 HV package RoHS : Compliant |
| 0 | ||
| STL120N4LF6AG | STMicroelectronics | Automotive-grade N-channel 40 V, 3.0 mOhm typ., 55 A STripFET F6 in a PowerFLAT 5x6 package RoHS : Compliant |
| 0 | ||
| RF5L1214750CB4 | STMicroelectronics | 750 W, 50 V, 1200 to 1400 MHz RF power LDMOS transistor RoHS : Compliant |
| 0 | ||
| STEL12H24PUR | STMicroelectronics | Electronic Switch for 12V, 5V and 3.3V buses RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | MC78L12ABDR2G![]() | onsemi | IC VOLT REG Fixed 1 REG 12V 100mA 8-SOIC T/R RoHS : Compliant |
| 80,000 | |
MC78L12ACPRMG![]() | onsemi | IC VOLT REG Fixed 1 REG 8V 100mA TO-226-3 Fan-Fold RoHS : Compliant |
| 124,217 | ||
MC79L12ACPG![]() | onsemi | IC VOLT REG Fixed 1 REG -12V 100mA TO-226-3 Bag RoHS : Compliant |
| 18,125 | ||
| S25FL128SAGMFIR10 | Infineon Technologies AG | FLASH - NOR (SLC) 128Mbit 16M x 8 2.7V - 3.6V SPI - Quad I/O 133MHz 6.5ns 750µs 16-SOIC Tray RoHS : Compliant |
| 755 | ||
| S25FL128SDSMFB001 | Infineon Technologies AG | FLASH - NOR (SLC) 128Mbit 16M x 8 2.7V - 3.6V SPI - Quad I/O 80MHz 6.5ns 750µs 16-SOIC Tube RoHS : Compliant |
| 3,852 | ||
| S29GL128S11DHBV20 | Infineon Technologies AG | FLASH - NOR (SLC) 128Mbit 8M x 16 2.7V - 3.6V CFI 110ns 60ns 64-BGA Tray RoHS : Compliant |
| 0 | ||
UA78L12ACLPE3![]() | Texas Instruments | Fixed Positive Standard Regulator, 12V, BIPolar, PBCY3 RoHS : Compliant |
| 230 | ||
ASFL1-24.000MHZ-ER-T![]() | Abracon Corporation | CRYSTAL OSC XO (Standard) HCMOS, TTL 24MHz 2.97V ~ 3.63V ±25ppm 4-SMD T/R RoHS : Compliant |
| 1,000 | ||
| S25FL128SAGMFIR10 | Cypress Semiconductor | FLASH - NOR (SLC) 128Mbit 16M x 8 2.7V - 3.6V SPI - Quad I/O 133MHz 6.5ns 750µs 16-SOIC Tray RoHS : Compliant |
| 770 | ||
| S25FL128SAGMFN000 | Cypress Semiconductor | S25FL128S - (16-MB), 3.0 V FL-L Flash Memory RoHS : Not Compliant |
| 1,955 | ||
| ISL12028IB27Z-T | Intersil Corporation | Real Time Clocks Clock/Calendar I²C 14-SOIC T/R RoHS : Compliant |
| 97 | ||
| ISL12029IB27Z-T | Intersil Corporation | Real Time Clocks Clock/Calendar I²C 14-SOIC T/R RoHS : Compliant |
| 2,290 | ||
MT55L128L32P1T-6![]() | Micron Technology Inc | ZBT SRAM, 128KX32, 3.5ns, CMOS, PQFP100 RoHS : Not Compliant |
| 2,776 | ||
MT58L128L36F1T-8.5![]() | Micron Technology Inc | Standard 4Mbit 128k x 36 3.135V - 3.6V Parallel 100MHz 8.5ns 100-QFP Tray RoHS : Not Compliant |
| 13,755 | ||
| RP510L124H-TR | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 3,000 | ||
![]() Sager | 15EFL12-12W-I/O-RB-M | UltraVolt Inc | Isolated DC/DC Converters - Chassis Mount EFL-Series Floating-Hot-Deck power supply, Quad output, 15kV HV isolation, +12Vdc input, +12Vdc primary output, +15/-15/+5.1Vdc secondary outputs, 12W, Thru-hole/Chassis mount, Regulated, Two up/Two down prescisi | 0 | ||
| 15FL12-12W-I/O-RB-H | UltraVolt Inc | Isolated DC/DC Converters - Chassis Mount FL-Series Floating-Hot-Deck power supply, Triple output, 15kV HV isolation, +12Vdc input, +12Vdc primary output, -15/+5.6Vdc secondary outputs, 12W, Thru-hole/Chassis mount, Regulated, One up isolated control cha | 0 | |||
| 12TL124-10 | Honeywell Sensing and Control / MICRO SWITCH | Toggle Switches SEALED OI | 0 | |||
| 114L12A602-T502 | Honeywell Sensing and Control / Clarostat | Potentiometers | 0 | |||
| RL1218-562-R | Eaton Bussmann | RF Inductors - Leaded 5600uH .418A | 0 | |||
| S2SD-05-24C-L-12.00-DS-NDS | Samtec Inc | Rectangular Cable Assemblies 2.00 mm Tiger Eye Double Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| S2SD-05-30-L-12.00-SR | Samtec Inc | Rectangular Cable Assemblies 2.00 mm Tiger Eye Double Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| S2SD-06-24C-L-12.00-SS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| S2SD-07-24-L-12.00-DR-NDS | Samtec Inc | Rectangular Cable Assemblies 2.00 mm Tiger Eye Double Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| S2SD-30-24C-L-12.00-DR-NDX | Samtec Inc | Rectangular Cable Assemblies 2.00 mm Tiger Eye Double Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| S2SDT-10-28-L-120.0-DS-NDX | Samtec Inc | Rectangular Cable Assemblies 2.00 mm Tiger Eye Double Row Discrete Wire Teflon Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| S2SDT-25-24-L-12.00-SS | Samtec Inc | Rectangular Cable Assemblies 2.00 mm Tiger Eye Double Row Discrete Wire Teflon Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| SCL120LA3MP1B | Mallory Sonalert Products Inc | Piezo Buzzers & Audio Indicators MED PULSE, 30-120V LOUD, LOW CURRENT RoHS : Compliant |
| 0 | ||
| SDL-121-T-12 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SDL-122-T-11 | Samtec Inc | IC & Component Sockets .100 Low Profile Double Row Screw Machine Socket Strip RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | L78L12ACUTR![]() | STMicroelectronics | L78L Series 100 mA 12 V Positive Voltage LDO Regulator Surface Mount - SOT-89 RoHS : Compliant | 895,080 | ||
| MT25QL128ABA1ESE-0SIT | Micron Technology Inc | SOIC 8/I°/SERIAL NOR Flash Memory SLC 32MX4 RoHS : Compliant | 54,000 | |||
| RR1005(0402)L1202FT | SUPEROHM | 14,739 | ||||
| MT25QL128ABA8ESF-0SIT | Micron Technology Inc | 32MX4 NOR FLASH PLASTIC IND TEMP PBF SOIC 3.0V MASS STORAGE RoHS : Compliant | 14,000 | |||
| RF7L120BKFRATCR | ROHM Semiconductor | N沟道 60V 12A, DFN2020Y8LSAA, 车载用功率MOSFET RoHS : Compliant |
| 6,090 | ||
MC78L12ABDR2G![]() | onsemi | MC78L00A Series 100 mA 12 V Fixed Output SMT LDO Voltage Regulator - SOIC-8 RoHS : Compliant | 5,100 | |||
| MT25QL128ABA1EW9-0SIT | Micron Technology Inc | WPDFN/I°/NOR FLASH 32MX4 PLASTIC PBF 3.0V MASS STORAGE RoHS : Compliant | 4,000 | |||
| RQ3L120BLFRATCB | ROHM Semiconductor | N沟道60V 12A, HSMT8AG, 车载用功率MOSFET RoHS : Compliant |
| 3,000 | ||
L78L12ACD![]() | STMicroelectronics | IC REG LDO 12V 0.1A 8SO RoHS : Compliant | 2,121 | |||
| IS43TR16256BL-125KBLI-TR | Integrated Silicon Solution Inc | RoHS : Compliant | 1,500 | |||
| MT25QL128ABA8ESF-0AAT | Micron Technology Inc | IC FLASH 128M SPI 133MHZ 16SOP2 RoHS : Compliant | 1,000 | |||
| RF9L120BKFRATCR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RQ3L120BJFRATCB | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| PL123-02NGI | Microchip Technology Inc | RoHS : Compliant | 34 | |||
| PL123-02NGC-R | Microchip Technology Inc | RoHS : Compliant | 24 | |||
![]() ComSIT USA | MC78L12ABDR2G | OS | AVAILABLE EU | 27,626 | ||
| MX25L12833FZNI10G | Macronix International Co Ltd | AVAILABLE EU | 2,902 | |||
| WSL1206R0150FEA | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 14,996 | |||
| TPSMA6L12A | Littelfuse Inc | AVAILABLE EU RoHS : Compliant | 13,500 | |||
| S25FL128SAGNFI000 | AVAILABLE EU | 251 | ||||
| IS43TR16256BL125KBLTR | Integrated Silicon Solution Inc | AVAILABLE EU | 668 | |||
| RL1206FR7W0R02L | YAGEO Corporation | AVAILABLE EU | 24,050 | |||
| ECR2WLK100MLL125020 | AVAILABLE EU | 3,000 | ||||
| RL1206FR070R33L | AVAILABLE EU | 2,666 | ||||
| LR09NL12530LH | AVAILABLE EU | 19,500 | ||||
| S25FL128SAGNFI003 | Infineon Technologies AG | AVAILABLE EU RoHS : Compliant | 449 | |||
IPD50N06S4L12ATMA2![]() | Infineon Technologies AG | AVAILABLE EU RoHS : Compliant | 17,542 | |||
![]() ComSIT USA | L1283080HA3500001 | Lumileds | LED Lighting White, Warm 3000K 80 1411 T/R RoHS : Compliant | 112,000 | ||
| RL1206FR070R22L | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 0.22ohm, 0.2345V, 1% +/-Tol, 600ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 70,000 | |||
| L1282790RE35000K2F27QD | Lumileds | LED RoHS : Compliant | 67,245 | |||
| L1284090RF35000F1G40QE | Lumileds | LED RoHS : Compliant | 45,720 | |||
| BUL128DB | STMicroelectronics | HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR Power Bipolar Transistor, 4A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 20,000 | |||
| L1282795RC35000T1B27QB | Lumileds | LED RoHS : Compliant | 16,000 | |||
| L1282790RF35000F1F27RE | Lumileds | LED RoHS : Compliant | 5,775 | |||
| RCWL1206R100JNEA | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 0.1ohm, 0.1581V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| L1283080CB3500001L7FH | Lumileds | LUXEON 2835 Architectural LED Single Color LED, Warm White, 2.95mm RoHS : Compliant | 4,000 | |||
| XPGWHTL12C0R5F05 | Cree, Inc. | Electronic Component RoHS : Compliant | 1,000 | |||
UA78L12ACD![]() | Texas Instruments | POSITIVE-VOLTAGE REGULATOR Fixed Positive Standard Regulator, 12VBIPolar, PDSO8 RoHS : Not Compliant | 675 | |||
| ISL12026IVZ | Intersil Corporation | Real Time Clock/Calendar with I2C Bus and EEPROM Real Time Clock, CMOS, PDSO8 RoHS : Compliant | 118 | |||
| S29GL128P90TFIR1 | Spansion | 128 MEGABIT, 3.0 VOLT-ONLY PAGE MODE FLASH MEMORY FEATURING 90 NM MIRRORBIT PROCESS TECHNOLOGY Flash, 128MX1, 90ns, PDSO56 RoHS : Not Compliant | 99 | |||
| HFJV12450L12RL | Halo Electronics Inc | Electronic Component RoHS : Compliant | 70 | |||
| KRL1220EMR100FT5 | Susumu Co Ltd | METAL FOIL LOW RESISTANCE CHIP RESISTOR Fixed Resistor, Metal Foil, 0.5W, 0.1ohm, 1% +/-Tol, 50ppm/Cel, Surface Mount, 0805 RoHS : Not Compliant | 60 | |||
![]() GLYN GmbH & Co. KG | ACL12864B-FP-RGB | ACLAVIS | LCD 128x64 COG,FSTN, RGB B/L, wide temp. | 134 | ||
| GLYN-PD10EHI-ETML121025-0550-L | ES+S | LVDS Kabel 55cm mit FI-X30H or equal type und ACE | 1 | |||
| GLYN-PD10EHI-ETML121025-0550-B | ES+S | BL Kabel 55cm mit SHR-08V-S-B or equal type und P | 1 | |||
| ETML121013DBDRA*K0 | Emerging Display Technolgies | TFT 12.10", 1280x800, IPS, 850cd, LVDS, proj.-cap. | 1 | |||
![]() Interstate Connecting Components | IL-12S-S3L-(N) | JAE Electronics |
| 343 | ||
| MS3475L12-10SX | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 268 | ||
| T9AV1L12-12 | TE Connectivity | T9AV1L12-12=RELAY ASSEMBLY RoHS : Compliant |
| 250 | ||
| MS3471L12-8SW L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 57 | ||
| MS3454L12S-3PY | Conesys | Jam Nut Receptacle Nickel Alum |
| 29 | ||
| MS3406L12S-3P | Conesys | CONNECT STRT PLUG |
| 6 | ||
| MS3456L12S-1A | Amphenol Aerospace | PLUG 3456L12S1A | 0 | |||
| MS3474L12-8S L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| PV70L12-10SL | ITT Interconnect Solutions | PV70L12-10SL | 0 | |||
| PV75L12-8PL27 | ITT Interconnect Solutions | PV75L12-8PL27 | 0 | |||
| KL1262510000G | Amphenol Anytek | KL-10.16-12P GREEN ROHS 90D C | 0 | |||
| GSTBL-120-.400-G1-429A | Glenair Inc | HD STACKER CONNECTOR ADD $900 NASA SCREEN | 0 | |||
| PV74L12-8S | ITT Interconnect Solutions | PV74L12-8S RoHS : Not Compliant | 0 | |||
| KL1261510000G | Amphenol Anytek | KL-10.16-12P GREEN ROHS 90D C | 0 | |||
| M12A03FL-12AFR-SD005 | Amphenol LTW Technology | M12 METRIC CIRCULAR CONNECTOR, OVERMOLDED | 0 | |||
![]() PEI Genesis | MS3475L12-10SX | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 18 | |
| MS3474L12-10S-US | Amphenol Aerospace |
| 10 | |||
| S4784R11L12 | SOURIAU-SUNBANK |
| 0 | |||
| SE20C1328AL12 | SOURIAU-SUNBANK |
| 0 | |||
| MS3470L12-3P-USSB2 | Amphenol Aerospace |
| 0 | |||
| MS3471L12-03S-LC | Amphenol Aerospace |
| 0 | |||
| MS3474L12-8PW-LC | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3474L12-8S-LC | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3474L12-8S-LC | Amphenol Aerospace |
| 0 | |||
| MS3475L12-10SX | Amphenol Aerospace |
| 0 | |||
| MS3476L12-10P-U | Amphenol Aerospace |
| 0 | |||
| PV70L12-10SY | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| PV70L12-3B | ITT Interconnect Solutions |
| 0 | |||
| PV71L12-3S | ITT Interconnect Solutions |
| 0 | |||
| PV74L12-10PZ | ITT Interconnect Solutions |
| 0 | |||
![]() PUI | ANR80-UL-12A | 1,929 | ||||
| ANR250-UL-12A | 775 | |||||
| ANR58-UL-12A | 617 | |||||
| 792XBXM4L-120A | 420 | |||||
| 784XDXM4L-120A | 27 | |||||
| 792XDXM4L-120A | 25 | |||||
| 782XBXM4L-120A | 20 | |||||
| 792XDXM4L-12D | 14 | |||||
| 782XBXM4L-12D | 10 | |||||
| 783XCXM4L-120A | 10 | |||||
| 781XAXRM4L-120A | 9 | |||||
| 750XCXRM4L-12D | 5 | |||||
| 725BXXSC3ML-120A | 4 | |||||
| 782XBXCL-120A | 4 | |||||
| 750XBXRM4L-12D | 3 | |||||
![]() Chip 1 Exchange | RL1210FR070R82L | YAGEO Corporation | INSTOCK | 12,640 | ||
MC78L12ABDR2G![]() | onsemi | INSTOCK RoHS : Compliant | 6,500 | |||
| L-KLS1-XL1-2.00-07-RM-R | INSTOCK | 5,614 | ||||
| RC03L123JT | INSTOCK | 4,800 | ||||
| MK22FX512AVLL12 | NXP Semiconductors | INSTOCK RoHS : Compliant | 3,150 | |||
| HYB39L128160AC-7.5 | Infineon Technologies AG | INSTOCK RoHS : Not Compliant | 3,000 | |||
| MMA0204-50BL 1% 2K | Vishay Intertechnologies | INSTOCK | 2,986 | |||
| L-KLS1-XL1-2.00-04-R | INSTOCK | 2,641 | ||||
| RL1206FR-7W0R051L | YAGEO Corporation | INSTOCK RoHS : Compliant | 2,419 | |||
| TFML-120-02-SD-LC | INSTOCK | 616 | ||||
| RL1206FR-070R18L | YAGEO Corporation | INSTOCK RoHS : Compliant | 350 | |||
UA78L12ACD![]() | Texas Instruments | INSTOCK RoHS : Compliant | 330 | |||
| WSL1206R0500FEA | INSTOCK | 288 | ||||
| UA78L12ACD | INSTOCK | 90 | ||||
| WSL1206R0500FEA | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 10 | |||
![]() Avnet Abacus | RL1206FR-070R2L | YAGEO Corporation | SMD Current Sense Resistor 02 ohm RL Series 1206 3216 Metric 250 mW 1 Thick Film - Tape and Reel (Alt: RL1206FR-070R2L) RoHS : Compliant | 75,000 | ||
| VL-1220/HFN | Panasonic Electronic Components | Rechargeable Battery Lithium Vanadium Pentoxide Coin 3V 7mAh PC Pin (Alt: VL-1220/HFN) RoHS : Not Compliant | 21,600 | |||
| RL1206FR-070R47L | YAGEO Corporation | SMD Current Sense Resistor 047 ohm RL Series 1206 3216 Metric 250 mW 1 Thick Film - Tape and Reel (Alt: RL1206FR-070R47L) RoHS : Compliant | 20,000 | |||
| RL1206FR-070R75L | YAGEO Corporation | SMD Current Sense Resistor 075 ohm RL Series 1206 3216 Metric 250 mW 1 Thick Film - Tape and Reel (Alt: RL1206FR-070R75L) RoHS : Compliant | 20,000 | |||
| RCL121868R0FKEK | Vishay Intertechnologies | - Tape and Reel (Alt: RCL121868R0FKEK) RoHS : Compliant | 16,000 | |||
| WSL120600000ZEA9 | Vishay Intertechnologies | Zero Ohm Resistor Jumper 1206 3216 Metric Metal Strip 65 A Surface Mount Device (Alt: WSL120600000ZEA9) RoHS : Compliant | 16,000 | |||
| RL1206FR-070R033L | YAGEO Corporation | - Tape and Reel (Alt: RL1206FR-070R033L) RoHS : Compliant | 15,000 | |||
| 0HAAL1250-02 | Bel Fuse | 2PIN RADIAL FUSE RECTANGULAR TIME LAG (Alt: 0HAAL1250-02) RoHS : Compliant | 9,000 | |||
| MFL1206R0500FS | Eaton Corporation | Resistor Current Sense Metal Film 1206 50m Ohm 1 12W 100ppmC TR - Tape and Reel (Alt: MFL1206R0500FS) RoHS : Compliant | 5,000 | |||
| RCWL1206R510JNEA | Vishay Intertechnologies | (Alt: RCWL1206R510JNEA) RoHS : Compliant | 5,000 | |||
| WSL1206R0100FEA | Vishay Intertechnologies | SMD Current Sense Resistor 001 ohm WSL Series 1206 3216 Metric 250 mW 1 Metal Strip (Alt: WSL1206R0100FEA) RoHS : Compliant | 4,000 | |||
| D09P13A6RL12LF | Amphenol Corporation | Conn DSubminiature PIN 9 POS 274mm Solder RA ThruHole 9 Terminal 1 Port TR - Tape and Reel (Alt: D09P13A6RL12LF) RoHS : Compliant | 1,050 | |||
| DRL-12V120W1EN | Eltek | ACDC DIN Rail Power Supply PSU ITE Laboratory Equipment 1 Output 120 W 12 VDC 10 A (Alt: DRL-12V120W1EN) RoHS : Compliant | 120 | |||
| IFL12-200ND300X200 | TDK Corporation | Noise Suppression Sheet 02mm Thickness 300x200mm (Alt: IFL12-200ND300X200) RoHS : Not Compliant | 30 | |||
| HVSL1200082A195 | Amphenol Corporation | Conn Power RCP 2 POS 34mm Crimp RA Cable Mount 2 Terminal Single Port (Alt: HVSL1200082A195) RoHS : Compliant | 10 | |||
![]() Avnet Asia | KW CDLMM2.TK-Y3Y5-5L1-2686-700-R18-AL | ams OSRAM Group | (Alt: KW CDLMM2.TK-Y3Y5-5L1-2686-700-R18-AL) RoHS : Compliant |
| 20,000 | |
| FL1200265 | Diodes Incorporated | (Alt: FL1200265) RoHS : Compliant | 15,000 | |||
| FL1200048 | Diodes Incorporated | (Alt: FL1200048) RoHS : Compliant |
| 15,000 | ||
| TL1211V1-R120-R | Eaton Corporation | INDUCTOR 120NH (Alt: TL1211V1-R120-R) RoHS : Compliant |
| 7,000 | ||
| GR VJLPL1.23-KRKS-A5R1-F2G1-350-R18-XX | ams OSRAM Group | (Alt: GR VJLPL1.23-KRKS-A5R1-F2G1-350-R18-XX) RoHS : Compliant | 5,000 | |||
| SL1211V2-R120-R | Eaton Corporation | (Alt: SL1211V2-R120-R) RoHS : Compliant |
| 2,800 | ||
| TL1211V2-R105-RV | Eaton Corporation | BUSTL1211V2-R105-RV TRANS IND,105NH 125A (Alt: TL1211V2-R105-RV) RoHS : Compliant | 1,750 | |||
| TL1211V3-R150-R | Eaton Corporation | TRANS IND,150NH 84A 4 PADS SMT (Alt: TL1211V3-R150-R) RoHS : Compliant |
| 1,750 | ||
| TL1211V2-R105-NQ | Eaton Corporation | (Alt: TL1211V2-R105-NQ) RoHS : Compliant |
| 1,750 | ||
| TL1212V2-R120-H | Eaton Corporation | IND, 120NH, 108A, 4 PADS, SMT FOR HP (Alt: TL1212V2-R120-H) RoHS : Compliant |
| 1,500 | ||
| TL1212V3-R120-R | Eaton Corporation | (Alt: TL1212V3-R120-R) RoHS : Compliant |
| 1,500 | ||
| CL1206V1-3-R120-R | Eaton Corporation | BUSCL1206V1-3-R120-R INDUCTOR 120NH (Alt: CL1206V1-3-R120-R) RoHS : Compliant |
| 500 | ||
| TL1212V2-R120-RV | Eaton Corporation | BUSTL1212V2-R120-RV INDUCTOR 120NH (Alt: TL1212V2-R120-RV) RoHS : Compliant |
| 400 | ||
| WSL12061L000FEA18 | Vishay Intertechnologies | (Alt: WSL12061L000FEA18) RoHS : Compliant | 0 | |||
| RK73H1ERTTPL1272F | KOA Speer Electronics Inc | Res Anti-Sulfured Thick Film 0402 12.7k Ohm 1% 1/10W ?100ppm/?C Molded Paper T/R (Alt: RK73H1ERTTPL1272F) RoHS : Compliant | 0 | |||
![]() Avnet Silica | L128-3080SA35A00E6 | Lumileds | (Alt: L128-3080SA35A00E6) RoHS : Compliant | 1,532,000 | ||
| L128-3090SA35A00E5 | Lumileds | (Alt: L128-3090SA35A00E5) RoHS : Compliant | 420,000 | |||
| L128-4080SA35A00E1 | Lumileds | (Alt: L128-4080SA35A00E1) RoHS : Compliant | 252,000 | |||
| L128-4070SA35A0DF1 | Lumileds | (Alt: L128-4070SA35A0DF1) RoHS : Compliant | 180,000 | |||
| L128-4090SA35A00D5 | Lumileds | (Alt: L128-4090SA35A00D5) RoHS : Compliant | 180,000 | |||
| L128-5780SA35A00G1 | Lumileds | (Alt: L128-5780SA35A00G1) RoHS : Compliant | 112,000 | |||
| L128-4090HA35000H5 | Lumileds | (Alt: L128-4090HA35000H5) RoHS : Compliant | 76,000 | |||
L78L12ACZ-TR![]() | STMicroelectronics | Standard Regulator Pos 12V 01A 3Pin TO92 TR (Alt: L78L12ACZ-TR) RoHS : Compliant | 64,000 | |||
L78L12ACZ-AP![]() | STMicroelectronics | Standard Regulator Pos 12V 01A 3Pin TO92 Ammo (Alt: L78L12ACZ-AP) RoHS : Compliant | 30,000 | |||
| MT25QL128ABA1ESE-0SIT TR | Micron Technology Inc | Flash Memory Serial NOR 128 Mbit 16M x 8bit SPI 8Pin SOIC W (Alt: MT25QL128ABA1ESE-0SIT TR) RoHS : Compliant | 10,500 | |||
MC79L12ACPG![]() | onsemi | Linear Voltage Regulator 100 mA 5 V Negative Vout 12 V TJ 0C to 125C ONSSPCLDO (Alt: MC79L12ACPG) RoHS : Compliant | 10,000 | |||
MC78L12ACPG![]() | onsemi | Linear Voltage Regulator 100 mA 5 to 24 V Positive Vout 120 V TJ 0C to 125C ONSSPCLDO (Alt: MC78L12ACPG) RoHS : Compliant | 2,000 | |||
| MT25QL128ABA1EW9-0SIT | Micron Technology Inc | Flash Memory Serial NOR 128 Mbit 16M x 8bit SPI 8 Pins WPDFNEP (Alt: MT25QL128ABA1EW9-0SIT) RoHS : Compliant | 1,920 | |||
| MT25QL128ABA8ESF-0SIT | Micron Technology Inc | Flash Memory Serial NOR 128 Mbit 16M x 8bit SPI 16 Pins SOIC W (Alt: MT25QL128ABA8ESF-0SIT) RoHS : Compliant | 1,440 | |||
MX25L12845EMI-10G![]() | Macronix International Co Ltd | Flash Serial 3V 128Mbit 128M64M32M x 1bit2bit4bit 16Pin SOP (Alt: MX25L12845EMI-10G/TUBE) RoHS : Compliant | 1,012 | |||
![]() Braemac Americas-Symmetry | EFM32GG12B410F1024GL120-AR | Silicon Laboratories Inc | ARM Cortex-M4 32-bit 72 MHz 1024 kB USB LCD MCU RoHS : Compliant |
| 1 | |
| ASFL1-20.000MHZ-ECS-T | Abracon Corporation | XTAL OSC XO 20.000MHZ HCMOS TTL RoHS : Compliant |
| 0 | ||
ASFL1-24.000MHZ-ER-T![]() | Abracon Corporation | XTAL OSC XO 24.0000MHZ HCMOS TTL RoHS : Compliant |
| 0 | ||
ASFL1-29.4912MHZ-EC-T![]() | Abracon Corporation | XTAL OSC XO 29.4912MHZ HCMOS TTL RoHS : Compliant |
| 0 | ||
| AMA12AR5L-120100Y | Aimtec |
| 0 | |||
| AMA18XER4L-120150Y | Aimtec |
| 0 | |||
| AMA24AR5L-120200Y | Aimtec |
| 0 | |||
| AMA24BR2L-120150Y | Aimtec |
| 0 | |||
| AMA36BR2L-120250Y | Aimtec |
| 0 | |||
| AMA40ER5L-120033Y | Aimtec |
| 0 | |||
| AMSRL1-2412ZTR | Aimtec | RoHS : Compliant |
| 0 | ||
| MTCAPW-L12G2-A600VA-CUA | Multi-Tech Systems Inc | CBRS Wi-Fi AP Access Point with Wi-Fi and Ethernet, includes Accessory Kit |
| 0 | ||
ASFL1-27.000MHZ-EC-T![]() | Abracon Corporation | XTAL OSC XO 27.0000MHZ HCMOS TTL RoHS : Compliant |
| 0 | ||
| AMA24AR5L-120150Y | Aimtec |
| 0 | |||
| AMA24DR4L-120200Y | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | FVL1210S3BR2 | Pentair Equipment Protection - Hoffman | IN STOCK SHIP TODAY |
| 6,900 | |
| RL-1292-3900 | Renco Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant | 6,479 | |||
| CTML1206-120K | Central Technologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,000 | ||
| SML12RG3-TR | LEDtronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,700 | ||
| BBL-124-T-F | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 775 | ||
| PC3L-12800 | A-Tech Components | IN STOCK SHIP TODAY |
| 147 | ||
| ACL1210-220K | TDK Corporation | IN STOCK SHIP TODAY | 90 | |||
MC78L12ABDR2G![]() | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 51 | ||
| ERJ-L12KF20MU | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 30 | ||
| BDL-120-G-E | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
| IEL12-21856-3 | Airpax | IN STOCK SHIP TODAY |
| 14 | ||
S29GL128N11TAI020![]() | Spansion | IN STOCK SHIP TODAY RoHS : Not Compliant | 10 | |||
MX25L12805DMI-20G![]() | Macronix International Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
| 9ZXL1231AKLF | Integrated Device Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| MS3476L12-8P | Matrix Connector | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | CAL1-2520-165 | SHEREX FASTENING SO | RNUT 1/4-20 165 SS302 LG FLG |
| 10,517 | |
| FPL12A | Essentra Components | TAPERED CAPPLUGLDPE BLACK | 0 | |||
| KL-125 | Essentra Components | CURLY LOCK,NATURAL,.13 IN-.15 | 0 | |||
| AL12 | Essentra Components | ClampScrew MntAlum3/4 in Hold Clamp Screw Mount Aluminum | 0 | |||
| M6216-4007-SSMODL=120MM | RAF Electronic Hardware | HANDLE, INTERNAL THREAD, ROUND MODIFIED,STAINLESS STEEL | 0 | |||
| ML-120/BLK | Sugatsune Kogyo Co Ltd | 0 | ||||
| BL12A | Essentra Components | STANDARD THREADED PLUGPP YELLO | 0 | |||
| 4516-440-S-PL-12 | RAF Electronic Hardware | 0 | ||||
| IL1271020 | Essentra Components | FLAT ROD | 0 | |||
| LG-6CT1250L12 | Southco | 0 | ||||
| X106837(STEEL)-12 | RAF Electronic Hardware | 0 | ||||
| 2051-440ALMODL=1-21/32 | RAF Electronic Hardware | 0 | ||||
| FSL-L1200 | Sugatsune Kogyo Co Ltd | 47-14 ALUMINUM CHANNEL FOR F | 0 | |||
| PC21EL-12000 | Shercon Inc | 0 | ||||
| M0595-4-AL-12 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | MC78L12ABDR2G![]() | onsemi | Linear Voltage Regulator 100 mA 5 to 24 V Positive Vout 120 V TJ 40C to 125C ONSSPCLDO (Alt: MC78L12ABDR2G) RoHS : Compliant | 530,000 | ||
L78L12ACUTR![]() | STMicroelectronics | Linear Voltage Regulator Fixed Positive 145 V to 35 V 12 V 100 mA 3 Pins SOT89 (Alt: L78L12ACUTR) RoHS : Compliant | 267,500 | |||
| STL120N8F7 | STMicroelectronics | (Alt: STL120N8F7) RoHS : Compliant | 15,000 | |||
L78L12ACUTR![]() | STMicroelectronics | Linear Voltage Regulator Fixed Positive 145 V to 35 V 12 V 100 mA 3 Pins SOT89 (Alt: L78L12ACUTR) RoHS : Compliant | 10,000 | |||
MC79L12ACPG![]() | onsemi | Linear Voltage Regulator 100 mA 5 V Negative Vout 12 V TJ 0C to 125C ONSSPCLDO (Alt: MC79L12ACPG) RoHS : Compliant | 8,000 | |||
| S29GL128S90FHI010 | Infineon Technologies AG | (Alt: SP005665199) RoHS : Compliant | 5,040 | |||
| IPD70N10S3L12ATMA2 | Infineon Technologies AG | Power MOSFET N Channel 100 V 70 A 111 Milliohms TO252 3 Pins Surface Mount (Alt: SP005549664) RoHS : Compliant | 5,000 | |||
| MK64FX512VLL12 | NXP Semiconductors | MCU 32Bit K64F ARM Cortex M4 RISC 512KB Flash 18V25V33V 100Pin LQFP Tray (Alt: MK64FX512VLL12) RoHS : Compliant | 4,590 | |||
| S29GL128S90DHI013 | Infineon Technologies AG | (Alt: SP005664537) RoHS : Compliant | 4,400 | |||
| S25FL128SAGNFI000 | Infineon Technologies AG | Flash Memory MirrorBit Eclipse Architecture Serial NOR 128 Mbit 16M x 8bit SPI WSONEP (Alt: SP005650819) RoHS : Compliant | 3,380 | |||
| S25FL128LAGMFV013 | Infineon Technologies AG | NOR Flash 128Mbit 32M X 4Bit64M X 2Bit128M X 1Bit SerialSPI 8Pin SOIC (Alt: SP005653811) RoHS : Compliant | 2,100 | |||
| S29GL128S10DHI020 | Infineon Technologies AG | NOR Flash Parallel 3V33V 128Mbit 8M x 16bit 100ns 64Pin FBGA Tray (Alt: SP005671221) RoHS : Compliant | 2,080 | |||
MC78L12ACPG![]() | onsemi | Linear Voltage Regulator 100 mA 5 to 24 V Positive Vout 120 V TJ 0C to 125C ONSSPCLDO (Alt: MC78L12ACPG) RoHS : Compliant | 2,000 | |||
L78L12ACZ-AP![]() | STMicroelectronics | Standard Regulator Pos 12V 01A 3Pin TO92 Ammo (Alt: L78L12ACZ-AP) RoHS : Compliant | 2,000 | |||
| MK22FN1M0VLL12 | NXP Semiconductors | MCU 32Bit K22 ARM Cortex M4 RISC 1MB Flash 33V 100Pin LQFP Tray (Alt: MK22FN1M0VLL12) RoHS : Compliant | 90 | |||
![]() Flip Electronics | L128-FS00CA3500000 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 195,000 | |
| L128-5080EC3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 192,000 | ||
| L128-33HGCA3500000 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 136,000 | ||
| L128-3590EC3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 24,000 | ||
| S25FL128SAGMFIR10 | Cypress Semiconductor | Stock RoHS : Compliant | 22,572 | |||
| L128-3580EA3500001 | Lumileds | Stock, Ship Today RoHS : Compliant | 20,000 | |||
| S25FL128SAGBHIA00 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant |
| 5,230 | ||
| S70KL1282GABHB023 | Infineon Technologies AG | Stock RoHS : Compliant | 3,140 | |||
| S25FL128SAGNFV013 | Infineon Technologies AG | Stock RoHS : Compliant | 2,500 | |||
MC78L12ABDR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,038 | ||
| MK22FN256VLL12R | NXP Semiconductors | Stock RoHS : Compliant | 735 | |||
| S29GL128P90FFSS93 | Cypress Semiconductor | Stock | 712 | |||
| S25FL128LAGNFV010 | Cypress Semiconductor | Stock RoHS : Compliant | 270 | |||
| S25FL128SAGNFA011 | Cypress Semiconductor | Stock | 34 | |||
| S25FL128SDSMFV010 | Cypress Semiconductor | Stock | 10 | |||
![]() Master Electronics | 219XBXPL-120VAC | Struthers-Dunn | Electromechanical Relay 120VAC 540Ohm 10A DPDT (64.1x36.8x83.7)mm Plug-In General Purpose Relay RoHS : Compliant |
| 25 | |
| 3057L-1-202 | Bourns Inc | Res Wirewound Trimmer 2K Ohm 5% 1W 22(Elec)Turns 2.92mm (33.22 X 4.83 X 8mm) Lead Wire Bag RoHS : Not Compliant |
| 1 | ||
| 3059L-1-203M | Bourns Inc | Res Cermet Trimmer 20K Ohm 10% 1W 22(Elec)Turn 2.54mm (39.7 X 6.76 X 10.31mm) Lead Wire Panel Mount Bag RoHS : Not Compliant |
| 0 | ||
| 3292L-1-204MLF | Bourns Inc | Res Cermet Trimmer 200K Ohm 10% 0.5W(1/2W) 25(Elec)Turn (17.27 X 6.1 X 11.68mm) Lead Wire Panel Mount Bag RoHS : Compliant |
| 0 | ||
| RSL-12 | Thomas & Betts | Steel City® Square Box Surface Cover - Material Galvanized Steel - Color Silver - One Duplex Flush Receptacle RoHS : Compliant |
| 0 | ||
| S2SD-05-24C-L-12.00-DS-NDS | Samtec Inc | 2.00 mm Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| S2SD-05-30-L-12.00-SR | Samtec Inc | 2.00 mm Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| S2SD-06-24C-L-12.00-SS | Samtec Inc | 2.00 mm Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| S2SD-07-24-L-12.00-DR-NDS | Samtec Inc | 2.00 mm Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| S2SD-15-26-L-12.00-D-NUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S2SD-25-26-L-12.00-D-NDS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S2SD-30-24-L-12.00-SS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S2SD-30-24C-L-12.00-DR-NDX | Samtec Inc | 2.00 mm Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| S2SDT-10-28-L-120.0-DS-NDX | Samtec Inc | 2.00 MM TIGER EYE DOUBLE RoHS : Compliant |
| 0 | ||
| S2SDT-25-24-L-12.00-SS | Samtec Inc | 2.00 MM TIGER EYE DOUBLE RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C3055LF/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-195 Coax Times Microwave Components, Blue Heat Shrink Indicator, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 12 inch length using LMR-195 coax Times Microwave components, blue heat shrink indicator, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 12 inch length using LMR-195 coax Times Microwave components, blue heat shrink indicator, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3055LF/BL-12 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3055LF/BL-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 12 inch length using LMR-195 coax Times Microwave components, blue heat shrink indicator, LF solder. |
| 2,328 | |
| PE3C8815/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL-120 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax. |
| 110 | ||
| PE3C8818/VL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-VL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/VL-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/VL-12 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-VL coax. |
| 105 | ||
| PE3C8743/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-VL, RF Cable Type: Belden 4694R-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/VL-120, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/VL-120 is built with belden 4694R-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/VL-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-VL coax. |
| 94 | ||
| PE3C8748/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-VL, RF Cable Type: Belden 4855R-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/VL-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/VL-120 is built with belden 4855R-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/VL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-VL coax. |
| 89 | ||
| PE3C8874/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/VL-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/VL-120 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/VL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax. |
| 89 | ||
| PE3C8875/VL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/VL-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/VL-12 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-VL coax. |
| 51 | ||
| PE3C8747/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-BL, RF Cable Type: Belden 4855R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/BL-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/BL-12 is built with belden 4855R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-BL coax. |
| 44 | ||
| PE3C8873/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/VL-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/VL-120 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax. |
| 44 | ||
| PE3C8745/VL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-VL, RF Cable Type: Belden 4694R-VL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/VL-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/VL-12 is built with belden 4694R-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/VL-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-VL coax. |
| 0 | ||
| PE3C8814/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/VL-120, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/VL-120 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/VL-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax. |
| 0 | ||
| PE3C8744/VL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-VL, RF Cable Type: Belden 4694R-VL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/VL-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/VL-12 is built with belden 4694R-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-VL coax. |
| 0 | ||
| PE3C8744/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-VL, RF Cable Type: Belden 4694R-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/VL-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/VL-120 is built with belden 4694R-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-VL coax. |
| 0 | ||
| PE3C8817/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/BL-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/BL-12 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/BL-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C8742/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/BL-120, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/BL-120 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/BL-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
![]() Venkel Ltd. | PWCR0805-BL-1210DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;121R;�0.5% RoHS : Compliant | 0 | ||
| PWCR0805-TL-12R1DT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�200PPM;12.1R;�0.5% RoHS : Compliant | 0 | |||
| PWCR1210-VL-12R0DT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�200PPM;12R;�0.5% RoHS : Compliant | 0 | |||
| PWCR2010-XL-12R7FT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�200PPM;12.7R;�1% RoHS : Compliant | 0 | |||
| MCL1210FRGB1T | VENKEL LTD | Multi-Color LED;1210;Flat Lens;RGB RoHS : Compliant | 0 | |||
| SWCR0805-TL-120KT | VENKEL LTD | Surge Withstanding CR;0805;1/4W;�200PPM;12R;�10% RoHS : Compliant | 0 | |||
| SWCR1206-WL-120JT | VENKEL LTD | Surge Withstanding CR;1206;3/4W;�200PPM;12R;�5% RoHS : Compliant | 0 | |||
| PWCR0603-QL-1270DT | VENKEL LTD | Pulse Withstanding CR;0603;1/10W;�200PPM;127R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-RL-120JT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�200PPM;12R;�5% RoHS : Compliant | 0 | |||
| PWCR0805-RL-12R4DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�200PPM;12.4R;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-WL-12R1DT | VENKEL LTD | Pulse Withstanding CR;1206;3/4W;�200PPM;12.1R;�0.5% RoHS : Compliant | 0 | |||
| PWCR2010-WL-12R7FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�200PPM;12.7R;�1% RoHS : Compliant | 0 | |||
| PWCR2512-ZL-12R7FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�200PPM;12.7R;�1% RoHS : Compliant | 0 | |||
| SWCR2010-XL-120MT | VENKEL LTD | Surge Withstanding CR;2010;1W;�200PPM;12R;�20% RoHS : Compliant | 0 | |||
| PWCR0603-TL-12R4DT | VENKEL LTD | Pulse Withstanding CR;0603;1/4W;�200PPM;12.4R;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | MT25QL128ABA8E12-0AAT | Micron Technology Inc | Flash, 16MX8, PBGA24 RoHS : Compliant | 6,591 | ||
| MT42L128M16D1LL-25IT:C | Micron Technology Inc | LPDDR2 DRAM, 128MX16, 5.5ns, CMOS RoHS : Compliant | 6,106 | |||
| MT42L128M16D4KH-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX16, CMOS, PBGA216 RoHS : Compliant | 5,965 | |||
| MT25QL128ABA1EW7-0M02IT | Micron Technology Inc | 5,018 | ||||
| MT25QL128ABA8ESF-0SIT | Micron Technology Inc | Flash, 16MX8, PDSO16 RoHS : Compliant | 4,972 | |||
| MT42L128M16D2LF-3AAT:C | Micron Technology Inc | LPDDR2 DRAM, 128MX16, CMOS, PBGA168 RoHS : Compliant | 4,076 | |||
| MT42L128M32D2KL-18AT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA168 | 4,068 | |||
| MT42L128M16D1MG-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX16, CMOS, PBGA134 RoHS : Compliant | 4,048 | |||
| MT42L128M32D1GV-3AIT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA134 RoHS : Compliant | 3,237 | |||
| MT42L128M32D1LD-18WT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA220 | 2,735 | |||
| MT42L128M32D1KU-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA216 | 2,694 | |||
| MT42L128M32D1LP-3WT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA216 | 2,468 | |||
| MT42L128M32D1GVLG-18AT:A | Micron Technology Inc | LPDDR2 DRAM | 2,446 | |||
| MT42L128M32D1EV-3AAT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX32, CMOS, PBGA253 RoHS : Compliant | 2,383 | |||
| ASFL1-20.000MHZ-ECS-T | Abracon Corporation | HCMOS/TTL Output Clock Oscillator, 20MHz Nom RoHS : Compliant | 828 | |||
![]() Waytek, Inc. | AL-12-50-MH-0-0C | Advanced Cable Ties Inc | ACT AL-11-50-MH-0-C mounting hole cable tie is a black nylon 6/6 tie with 50 lb. tensile strength, an integrated mounting hole, and reliable performance from -40F to 185F. Packaged in bags of 100, it bundles wire and cable while fastening the bundle to a panel or surface. |
| 12,300 | |
| AL-12-50-MH-9-C | Advanced Cable Ties Inc | ACT AL-11-50-MH-9-C mounting hole cable tie is a natural nylon 6/6 tie with 50 lb. tensile strength, an integrated mounting hole, and reliable performance from -40F to 185F. Packaged in bags of 100, it bundles wire and cable while fastening the bundle to a panel or surface. |
| 3,600 | ||
| PINV3000SWL-120 | Eaton Electronics | Tripp Lite 3000W Pure SINE Wave Power Inverter w/USB Charging |
| 5 | ||
| PINV2000SWL-120 | Eaton Electronics | Tripp Lite 2000W Pure SINE Wave Power Inverter w/USB Charging |
| 0 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |