| Electronic Components Datasheet Search |
|
KHS-L-2ACSLASHQ Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | KHS10AJB-AX-10RAA | YAGEO Corporation | Resistor: wire-wound; ceramic; 10W; ±5%; 38x9x9mm; -55÷350°C; axial |
| 10,000 | |
| KHS11AKB-AX-15RAA | YAGEO Corporation | Resistor: wire-wound; 15Ω; ceramic; THT; ±10%; -55÷350°C; 50mm |
| 4,600 | ||
| KHS400KB-AX-6K2AA | YAGEO Corporation | Resistor: wire-wound; ceramic; axial |
| 2,000 | ||
| KHS400JB-AX-1R8AA | YAGEO Corporation | Resistor: wire-wound; 1.8Ω; ceramic; 4W; 20x6.4x6.4mm; L: 20mm |
| 800 | ||
| S32M244CCABWKHST | NXP Semiconductors | IC: ARM microcontroller; SMD; -40÷150°C; LQFP64; Core: 32-bit; ARM RoHS : Compliant |
| 640 | ||
| RSTS 8Y-RKHS 8Y-922/10 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 10m; plug; 50VDC; 50VAC; 0.5A; PUR |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/0,3 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 0.3m; plug; 50VDC; 50VAC; 0.5A; PUR |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/2,6 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 2.6m; plug; 50VDC; 50VAC; 0.5A; PUR |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/3 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 3m; plug; 50VDC; 50VAC; 0.5A; Cores: 8 |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/0,6 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 0.6m; plug; 50VDC; 50VAC; 0.5A; PUR |
| 0 | ||
| EKHS | FIBOX | Enclosure: enclosure base; X: 190mm; Y: 190mm; Z: 100mm |
| 0 | ||
| R1966IBLKBLKHS | E-Switch Inc | ROCKER; SP3T; Pos: 3; (ON)-ON-(OFF); 8A/250VAC; black; R1966 RoHS : Compliant |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/15 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 15m; plug; 50VDC; 50VAC; 0.5A; PUR |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/5 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 5m; plug; 50VDC; 50VAC; 0.5A; Cores: 8 |
| 0 | ||
| RSTS 8Y-RKHS 8Y-922/2 M | Lumberg Automation | Cable: for sensors; M12; PIN: 8; 2m; plug; 50VDC; 50VAC; 0.5A; Cores: 8 |
| 0 | ||
![]() Avnet Americas | KHSS-316G-RSC-12 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: 30AC7969) RoHS : Not Compliant |
| 0 | |
| KHSS-316G-RSC-12 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-316G-RSC-12) RoHS : Compliant |
| 0 | ||
| KHSS-14G-RSC-24 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-14G-RSC-24) RoHS : Compliant |
| 0 | ||
| KHSS-316G-RSC-48 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-316G-RSC-48) RoHS : Not Compliant |
| 0 | ||
| KHSS-18G-RSC-12-NP | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-18G-RSC-12-NP) RoHS : Not Compliant |
| 0 | ||
| KHSS-14E-RSC-18 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-14E-RSC-18) RoHS : Not Compliant |
| 0 | ||
| KHSS-14G-RSC-18 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-14G-RSC-18) RoHS : Compliant |
| 0 | ||
| S32M242CCABMKHST | NXP Semiconductors | LQFP-EP-64/MCU 80MHz M4 256KB - Trays (Alt: S32M242CCABMKHST) RoHS : Compliant |
| 0 | ||
| KHSS-18G-RSC-24-NP | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-18G-RSC-24-NP) RoHS : Not Compliant |
| 0 | ||
| KHSS-316E-12 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-316E-12) RoHS : Not Compliant |
| 0 | ||
| KHSS-IM45G-RSC-300 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-IM45G-RSC-300) RoHS : Not Compliant |
| 0 | ||
| KHSS-M60G-RSC-300 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-M60G-RSC-300) RoHS : Not Compliant |
| 0 | ||
| KHSUP-14G-RSC-12 | Omega Engineering | MOST THERMOCOUPLE PROBE STYLES, HANDLE, MOLDED JUNCTION, QUICK DISCONNECT, HEAVY DUTY - Bulk (Alt: KHSUP-14G-RSC-12) RoHS : Not Compliant |
| 0 | ||
| KHSS-14G-RSC-24-NP | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-14G-RSC-24-NP) RoHS : Not Compliant |
| 0 | ||
| KHSS-14U-RSC-12-OSTW-M | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-14U-RSC-12-OSTW-M) RoHS : Not Compliant |
| 0 | ||
![]() Newark | KHS10AJB-AX-10RAA | Vitrohm Portuguesa LDA | Res, 10R, 10W, Wirewound, Axial Lead; |Vitrohm KHS10AJB-AX-10RAA RoHS : Compliant |
| 6,066 | |
| CGP5C100KHSDAA7301 | KEMET Corporation | Cap, Cer, Disc, 1000Pf, 2Kv, ±10%; |Kemet CGP5C100KHSDAA7301 RoHS : Compliant |
| 2,000 | ||
| CGP5C100KHSDAA7301 | KEMET Corporation | Cap, Cer, Disc, 1000Pf, 2Kv, ±10%; |Kemet CGP5C100KHSDAA7301 RoHS : Compliant |
| 2,000 | ||
| CGP5C100KHSDAA7301 | KEMET Corporation | Cap, 10Pf, 3Kv, Disc, Radial; |Kemet CGP5C100KHSDAA7301 RoHS : Compliant |
| 2,000 | ||
| CGP5C100KHSDAA7301 | KEMET Corporation | Cap, 10Pf, 3Kv, Disc, Radial; |Kemet CGP5C100KHSDAA7301 RoHS : Compliant |
| 2,000 | ||
| KHS10AJB-AX-47RAA | Vitrohm Portuguesa LDA | Res, 47R, 10W, Wirewound, Axial Lead; |Vitrohm KHS10AJB-AX-47RAA RoHS : Compliant |
| 748 | ||
| KHS400JB-AX-R1AA | Vitrohm Portuguesa LDA | Res, R1, 4W, Wirewound, Axial Lead; |Vitrohm KHS400JB-AX-R1AA RoHS : Compliant |
| 360 | ||
| KHS400JB-AX-47RAA | Vitrohm Portuguesa LDA | Res, 47R, 4W, Wirewound, Axial Lead; |Vitrohm KHS400JB-AX-47RAA RoHS : Compliant |
| 354 | ||
| KHS700JB-AX-68RAA | Vitrohm Portuguesa LDA | Res, 68R, 7W, Wirewound, Axial Lead; |Vitrohm KHS700JB-AX-68RAA RoHS : Compliant |
| 351 | ||
| KHS11AJB-AX-15RAA | Vitrohm Portuguesa LDA | Res, 15R, 11W, Wirewound, Axial Lead; |Vitrohm KHS11AJB-AX-15RAA RoHS : Compliant |
| 279 | ||
| KHS17AJB-AX-560RAA | Vitrohm Portuguesa LDA | Res, 560R, 17W, Wirewound, Axial Lead; |Vitrohm KHS17AJB-AX-560RAA RoHS : Compliant |
| 180 | ||
| KHS800JB-AX-47RAA | Vitrohm Portuguesa LDA | Res, 47R, 8W, Wirewound, Axial Lead; |Vitrohm KHS800JB-AX-47RAA RoHS : Compliant |
| 177 | ||
| KHS11AJB-AX-68RAA | Vitrohm Portuguesa LDA | Res, 68R, 11W, Wirewound, Axial Lead; |Vitrohm KHS11AJB-AX-68RAA RoHS : Compliant |
| 93 | ||
| KHSS-316G-RSC-12 | Omega Engineering | Thermocouple Probe, Type K, 4.5X300Mm; |Omega KHSS-316G-RSC-12 RoHS : Compliant |
| 33 | ||
| BEF-KHS-ISPL21AP01 | SICK AG | Mounting Bracket, Sensor/Stainless Steel; |Sick BEF-KHS-ISPL21AP01 RoHS : Compliant |
| 3 | ||
![]() RS | BEF-KHS-C01 (2022460) | SICK AG | ACCESSORY, UNIVERSAL BAR CLAMP SYSTEMS, CLAMP AND MNT HARDWRE, PLATE C |
| 46 | |
| BEF-KHS-F01 (2022463) | SICK AG | ACCESSORY, UNIVERSAL BAR CLAMP SYSTEMS, CLAMP AND MNT HARDWRE, PLATE F |
| 24 | ||
| BEF-KHS-N02 (2051608) | SICK AG | ACCESSORY, UNIVERSAL BAR CLAMP SYSTEMS, CLAMP AND MNT HARDWARE, PLATE N02, ZINC |
| 12 | ||
| KHSS-14U-RSC-24 | Omega Engineering | UTILITY HANDLE PROBE W/RSC |
| 2 | ||
| KHSS-14U-RSC-36 | Omega Engineering | UTILITY HANDLE PROBE W/RSC |
| 1 | ||
| KHSS-116U-RSC-12 | Omega Engineering | UTILITY HANDLE PROBE W/RSC |
| 1 | ||
| EMMS-AS-140-SK-HS-RM (560900) | Festo | SERVO MOTOR, AC SYNCH, 140MM FLNG, SHORT, ABS ENC MULTI TRN, HI V, F KEY |
| 0 | ||
| EMMS-AS-70-SK-HS-RR (1550914) | Festo | SERVO MOTOR, AC SYNCH, 70MM FLNG, RESOLVER, HI V, F KEY, SHORT |
| 0 | ||
| EMMS-AS-190-MK-HS-AR (1584944) | Festo | SERVO MOTOR, AC SYNCH, 190MM FLNG, RESOLVER, HI V, F KEY |
| 0 | ||
| EMME-AS-80-SK-HS-AMXB (4267587) | Festo | SERVO MOTOR, AC SYNCH, 80MM FLANGE, DIN6885 SHAFT, SAFETY ENC ABS, SHORT, BRAKE |
| 0 | ||
| EMMT-AS-150-LK-HS-R3S (8148336) | Festo | SERVO MOTOR, EMMT-AS SERIES |
| 0 | ||
| EMMT-AS-150-MK-HS-R2S (8148282) | Festo | Servo Motor, for electric actuator |
| 0 | ||
| SS-5H-2.5A-BKH (SS-5H-2-5A-BKH) | Eaton Electronics | SS-5H 300V RADIAL TD FUSE BULK PACK |
| 0 | ||
| EMMS-AS-100-SK-HS-RSB-S1 (1562929) | Festo | SERVO MOTOR, AC SYNCH, 100MM FLNG, SHORT, ABS ENC SGL TRN, HI V, F KEY, BRAKE, IP65 |
| 0 | ||
| EMMS-AS-100-MK-HS-RSB-S1 (1562954) | Festo | SERVO MOTOR, AC SYNCH, 100MM FLNG, ABS ENC SGL TRN, HI V, F KEY, BRAKE, IP65 |
| 0 | ||
![]() Microchip Technology Inc | ATMEGAS64M1-KH-SV | Microchip Technology Inc | ATmegaS64M1 Rad Tolerant 8 bit Microcontroller - Ceramic - SV, CQFP, Projected EOL: 2046-04-19 - Contact for Pricing RoHS : Compliant | 101 | ||
![]() Rochester Electronics | S32M244LCABWKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 512kB (512k x 8) 80MHz 64-QFP Tray RoHS : Compliant |
| 1,078 | |
| AFV141KHSR5 | NXP Semiconductors | RF MOSFET LDMOS 105V 1.4GHz 100mA 4L-FLG T/R RoHS : Compliant |
| 50 | ||
| S32M276CHABMKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M7F 32Bit 1 Core FLASH 1MB (1M x 8) 120MHz 64-QFP Tray RoHS : Compliant |
| 121 | ||
| S32M244CCABWKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 512kB (512k x 8) 80MHz 64-QFP Tray RoHS : Compliant |
| 320 | ||
| S32M276LHABMKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M7F 32Bit 1 Core FLASH 1MB (1M x 8) 120MHz 64-QFP Tray RoHS : Compliant |
| 940 | ||
| AFV121KHSR5 | NXP Semiconductors | RF MOSFET LDMOS 112V 1.215GHz 100mA 4L-FLG T/R RoHS : Compliant |
| 30 | ||
![]() Sager | NKHS2IG-X | Panduit Corp | Wire Ducting & Raceways NK 2-Position 1/2 Sloped Insert Gray | 0 | ||
| KHS-17A13-120 | TE Connectivity | TE Connectivity | 0 | |||
| F92EPKHKHSHM006 | Panduit Corp | OS2 2F 1.6MM PC OFNP LC KEY H / LC KEY |
| 0 | ||
| NKHS2IW-X | Panduit Corp | Wire Ducting & Raceways NK 2-port 1/2 sloped insert | 0 | |||
| 48T5.12K-HS | Calex Mfg Co Inc | Isolated DC/DC Converters - Through Hole | 0 | |||
| KHSGPAT | Panduit Corp | Labels and Industrial Warning Signs Housings & Labels & Screws Spare Part Ki | 0 | |||
| KHSGPAT2-3 | Panduit Corp | Panduit RH & LH Housing Assm & Screws Spare Part |
| 0 | ||
| NKHSCMZWH | Panduit Corp | Wire Ducting & Raceways NK HORZ Snglmode SC Adapt | 0 | |||
| F92EPKHKHSHM015 | Panduit Corp | OS2 2F 1.6MM PC OFNP LC KEY H / LC KEY |
| 0 | ||
| KHS-17D11-110 | TE Connectivity | TE Connectivity | 0 | |||
| KHS-17D12-12 | TE Connectivity | TE Connectivity | 0 | |||
| F92EPKHKHSHM009 | Panduit Corp | OS2 2F 1.6MM PC OFNP LC KEY H / LC KEY |
| 0 | ||
| NKHS2SBL-X | Panduit Corp | Electrical Enclosure Accessories NK 2-port 1/2 slopd shuttrd insert | 0 | |||
| KHS-17D11-48 | TE Connectivity | TE Connectivity | 0 | |||
| F92EPKHKHSHM002 | Panduit Corp | OS2 2F 1.6MM PC OFNP LC KEY H / LC KEY |
| 0 | ||
![]() ComSIT USA | KHS500KBAX3R9AA | Vitrohm Portuguesa LDA | AXIAL FIBER GLASS CORE CERAMIC CASE POWER WIREWOUND RESISTOR Fixed Resistor, Wire Wound, 5W, 3.9ohm, 4.42V, 10% +/-Tol, -80,40ppm/Cel, Through Hole Mount RoHS : Compliant | 800 | ||
| KHS500KBAX15KAA | Vitrohm Portuguesa LDA | Fixed Resistor, Wire Wound, 5W, 15000ohm, 273.86V, 10% +/-Tol, 10ppm/Cel, Through Hole Mount RoHS : Compliant | 190 | |||
| KHS072VG1ABG10 | KYOCERA Corporation | Electronic Component RoHS : Compliant | 126 | |||
| KHS10AJBAX220RAA | Vitrohm Portuguesa LDA | AXIAL FIBER GLASS CORE CERAMIC CASE POWER WIREWOUND RESISTOR Fixed Resistor, Wire Wound, 10W, 220ohm, 46.9V, 5% +/-Tol, -80,40ppm/Cel, Through Hole Mount RoHS : Compliant | 100 | |||
| FRS1KHS12V | Maluska Elektronik | Electronic Component RoHS : Compliant | 48 | |||
![]() Chip 1 Exchange | HRS1KH-S | HKE | INSTOCK | 3,000 | ||
![]() Avnet Abacus | KHS10AKR-83-10RP0 | Vitrohm Portuguesa LDA | Resistor 10 Ohm 10 10 W Axial Leaded Wirewound Power - Tape and Reel (Alt: KHS10AKR-83-10RP0) RoHS : Compliant | 74,000 | ||
| KHS11AKB-AX-15RAA | Vitrohm Portuguesa LDA | Resistor 15 Ohm 10 11 W Axial Leaded Wirewound Power (Alt: KHS11AKB-AX-15RAA) RoHS : Compliant | 4,600 | |||
| KHS10AJB-AX-2RAA | Vitrohm Portuguesa LDA | Res Power Wirewound 2 Ohm 5 10W 80ppmC to 40ppmC Ceramic Bulk (Alt: KHS10AJB-AX-2RAA) RoHS : Compliant | 1,400 | |||
| KHS400JB-AX-1R8AA | Vitrohm Portuguesa LDA | Resistor 18 Ohm 5 4 W Axial Leaded Wirewound Power (Alt: KHS400JB-AX-1R8AA) RoHS : Compliant | 800 | |||
| KHS500KB-AX-4R7AA | Vitrohm Portuguesa LDA | Resistor 47 Ohm 10 5 W Axial Leaded Wirewound Power (Alt: KHS500KB-AX-4R7AA) RoHS : Compliant | 800 | |||
| KHS10AKB-AX-12KAA | Vitrohm Portuguesa LDA | Resistor 12 kOhm 10 10 W Axial Leaded Wirewound Power (Alt: KHS10AKB-AX-12KAA) RoHS : Compliant | 0 | |||
| KHS10AKB-AX-15RAA | Vitrohm Portuguesa LDA | Resistor 15 Ohm 10 10 W Axial Leaded Wirewound Power (Alt: KHS10AKB-AX-15RAA) RoHS : Compliant | 0 | |||
| KHS10AKB-AX-1K2AA | Vitrohm Portuguesa LDA | Resistor 12 kOhm 10 10 W Axial Leaded Wirewound Power (Alt: KHS10AKB-AX-1K2AA) RoHS : Compliant | 0 | |||
| KHS400KB-AX-15RAA | Vitrohm Portuguesa LDA | Resistor 15 Ohm 10 4 W Axial Leaded Wirewound Power (Alt: KHS400KB-AX-15RAA) RoHS : Compliant | 0 | |||
| KHS400KB-AX-1K2AA | Vitrohm Portuguesa LDA | Resistor 12 kOhm 10 4 W Axial Leaded Wirewound Power (Alt: KHS400KB-AX-1K2AA) RoHS : Compliant | 0 | |||
| KHS500JB-AX-1K8AA | Vitrohm Portuguesa LDA | Resistor 18 kOhm 5 5 W Axial Leaded Wirewound Power (Alt: KHS500JB-AX-1K8AA) RoHS : Compliant | 0 | |||
| KHS500JR-83-3R9AA | Vitrohm Portuguesa LDA | Resistor 39 Ohm 5 5 W Axial Leaded Wirewound Power - Tape and Reel (Alt: KHS500JR-83-3R9AA) RoHS : Compliant | 0 | |||
| KHS500JR-83-R75AA | Vitrohm Portuguesa LDA | Resistor 750 Milliohms 5 5 W Axial Leaded Wirewound Power - Tape and Reel (Alt: KHS500JR-83-R75AA) RoHS : Compliant | 0 | |||
| KHS500KB-AX-12RAA | Vitrohm Portuguesa LDA | Resistor 12 Ohm 10 5 W Axial Leaded Wirewound Power (Alt: KHS500KB-AX-12RAA) RoHS : Compliant | 0 | |||
| KHS500KB-AX-120RAA | Vitrohm Portuguesa LDA | Resistor 120 Ohm 10 5 W Axial Leaded Wirewound Power (Alt: KHS500KB-AX-120RAA) RoHS : Compliant | 0 | |||
![]() Avnet Silica | S32M242CCABMKHST | NXP Semiconductors | (Alt: S32M242CCABMKHST) RoHS : Compliant | 0 | ||
| S32M244CCABWKHSR | NXP Semiconductors | (Alt: S32M244CCABWKHSR) RoHS : Compliant | 0 | |||
| S32M241CCABMKHST | NXP Semiconductors | (Alt: S32M241CCABMKHST) RoHS : Compliant | 0 | |||
| S32M242LCABVKHST | NXP Semiconductors | (Alt: S32M242LCABVKHST) RoHS : Compliant | 0 | |||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | |||
| S32M241LCABMKHSR | NXP Semiconductors | (Alt: S32M241LCABMKHSR) RoHS : Compliant | 0 | |||
| P32M244CCABWKHST | NXP Semiconductors | SAMPLE P32M244CCABWKHST (Alt: P32M244CCABWKHST) RoHS : Compliant | 0 | |||
| AP9214L-AK-HSB-7 | Diodes Incorporated | (Alt: AP9214L-AK-HSB-7) RoHS : Compliant | 0 | |||
| S32M243CCABWKHSR | NXP Semiconductors | (Alt: S32M243CCABWKHSR) RoHS : Compliant | 0 | |||
| S32M276CHABMKHST | NXP Semiconductors | ARM MCU 32bit ARM CortexM7F 120 MHz 1 Megabytes 128 KB 64 Pins LQFPEP (Alt: S32M276CHABMKHST) RoHS : Compliant | 0 | |||
| S32M241LCABMKHST | NXP Semiconductors | (Alt: S32M241LCABMKHST) RoHS : Compliant | 0 | |||
| S32M244CCABWKHST | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 80 MHz 512 Kilobytes 64 KB 64 Pins LQFPEP (Alt: S32M244CCABWKHST) RoHS : Compliant | 0 | |||
| S32M241LCABVKHST | NXP Semiconductors | (Alt: S32M241LCABVKHST) RoHS : Compliant | 0 | |||
| ATMEGAS64M1-KH-SV | Microchip Technology Inc | (Alt: ATMEGAS64M1-KH-SV) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RF1206-4.99K-HS | Uniohm Corp | IN STOCK SHIP TODAY |
| 4,500 | |
| RF0603-2K-HS | Uniohm Corp | IN STOCK SHIP TODAY |
| 4,500 | ||
| KHSL30-2048-00(500) | KEL Corporation | IN STOCK SHIP TODAY | 359 | |||
| NKHS2WH-X | Panduit Corp | IN STOCK SHIP TODAY |
| 40 | ||
| KHS-17D11-48 | TE Connectivity | IN STOCK SHIP TODAY |
| 2 | ||
![]() EBV Elektronik | S32M244CCABWKHST | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 80 MHz 512 Kilobytes 64 KB 64 Pins LQFPEP (Alt: S32M244CCABWKHST) RoHS : Compliant | 640 | ||
| FF400R12KHS3F | Infineon Technologies AG | IGBTs (Alt: FF400R12KHS3F) RoHS : Compliant | 0 | |||
| S32M244CCABWKHSR | NXP Semiconductors | (Alt: S32M244CCABWKHSR) RoHS : Compliant | 0 | |||
| S32M244LCABWKHSR | NXP Semiconductors | (Alt: S32M244LCABWKHSR) RoHS : Compliant | 0 | |||
| S32M274LHABMKHST | NXP Semiconductors | QFP64 S32M2 Motor Control IS CM7 120MHz 512K Flash LIN Phy HSEB Security (Alt: S32M274LHABMKHST) RoHS : Compliant | 0 | |||
| S32M244CCABMKHSR | NXP Semiconductors | (Alt: S32M244CCABMKHSR) RoHS : Compliant | 0 | |||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | |||
| S32M243LCABWKHSR | NXP Semiconductors | (Alt: S32M243LCABWKHSR) RoHS : Compliant | 0 | |||
| S32M276CHABMKHSR | NXP Semiconductors | (Alt: S32M276CHABMKHSR) RoHS : Compliant | 0 | |||
| S32M241CCABMKHSR | NXP Semiconductors | (Alt: S32M241CCABMKHSR) RoHS : Compliant | 0 | |||
| S32M243CCABWKHSR | NXP Semiconductors | (Alt: S32M243CCABWKHSR) RoHS : Compliant | 0 | |||
| S32M276CHABMKHST | NXP Semiconductors | ARM MCU 32bit ARM CortexM7F 120 MHz 1 Megabytes 128 KB 64 Pins LQFPEP (Alt: S32M276CHABMKHST) RoHS : Compliant | 0 | |||
| S32M243LCABWKHST | NXP Semiconductors | (Alt: S32M243LCABWKHST) RoHS : Compliant | 0 | |||
| S32M244CCABMKHST | NXP Semiconductors | (Alt: S32M244CCABMKHST) RoHS : Compliant | 0 | |||
| S32M276LHABMKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M27x Series Microcontrollers ARM CortexM7F 32 bit 120 MHz 1 MB (Alt: S32M276LHABMKHST) RoHS : Compliant | 0 | |||
![]() Flip Electronics | S32M244LCABWKHST | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 160 | |
| S32M244CCABWKHST | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 160 | ||
![]() Master Electronics | KHS-17A13-120 | TE Connectivity | Relay - Miniature - 4PDT - 3A - 120 VAC 3900 Ohms Coil. RoHS : Not Compliant |
| 571 | |
| EKHS451VSN151MP30S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 150uF (+/-) 20% - 450VDC - 22mm Dia x 30mm RoHS : Compliant |
| 165 | ||
| EKHS501VSN121MP40S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS451VSN181MP35S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 180uF (+/-) 20% - 450VDC - 22mm Dia x 35mm RoHS : Compliant |
| 0 | ||
| EKHS4H1VSN191MP40S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS4H1VSN871MA60S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS4H1VSN351MQ50S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS451VSN331MQ40S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 330uF (+/-) 20% - 450VDC - 25.4mm Dia x 40mm RoHS : Compliant |
| 0 | ||
| EKHS451VSN561MA40S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 560uF (+/-) 20% - 450VDC - 35mm Dia x 40mm RoHS : Compliant |
| 0 | ||
| EKHS4H1VSN271MQ50S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS451VSN181MQ25S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 180uF (+/-) 20% - 450VDC - 25.4mm Dia x 25mm RoHS : Compliant |
| 0 | ||
| EKHS451VSN271MA25S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 270uF (+/-) 20% - 450VDC - 35mm Dia x 25mm RoHS : Compliant |
| 0 | ||
| EKHS4H1VSN181MP50S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS4H1VSN231MQ35S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKHS451VSN821MA55S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor - Radial - Snap-In Leads - 820uF (+/-) 20% - 450VDC - 35mm Dia x 55mm RoHS : Compliant |
| 0 | ||
![]() Neutron USA | RSTS 8Y-RKHS 8Y-922/3 M | Lumberg Connect GmbH | Ethernet Cables / Networking Cables |
| 1 | |
| BEF-KHS-C01 | SICK AG | Accessory, Universal Bar Clamp Systems, Clamp and Mnt Hardwre, Plate C |
| 0 | ||
| BEF-KHS-F01 | SICK AG | Accessory, Universal Bar Clamp Systems, Clamp and Mnt Hardwre, Plate F |
| 0 | ||
| BEF-KHS-N03 | SICK AG | Accessory; Universal Bar Clamp Systems; Clamp and Mnt Hardware; Plate N03 |
| 0 | ||
| BEF-KHS-N07 | SICK AG | AccessoriesMounting systems |
| 0 | ||
| BEF-KHS-A01 | SICK AG | Universal bar clamp systems. Plate A for universal clamp bracket |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0442/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-240 Coax with HeatShrink., Pasternack’s PE3C0442/BK/HS TNC male to SMA male RF cable assembly using LMR-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and an SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C0442/BK/HS can also be known as a TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0442/BK/HS RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. This PE3C0442/BK/HS TNC plug to SMA plug cable assembly is built with LMR-240, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C0442/BK/HS can also be used in the other direction and will be an SMA male to TNC male cable assembly if the opposite connectivity is required. This TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | ||
| PE3W05120LF/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to Blue FAKRA Jack Right Angle Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3W05120LF/BK/HS right angle MCX plug to right angle FAKRA jack RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a right angle FAKRA cable connection on the other. Our MCX to FAKRA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W05120LF/BK/HS can also be known as a right angle MCX male to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05120LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MCX plug to right angle FAKRA jack cable has a maximum VSWR of 1.4:1. This PE3W05120LF/BK/HS MCX male to FAKRA female cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05120LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to right angle MCX plug cable assembly if the opposite connectivity is required. This MCX right angle male to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to FAKRA cable assembly for quick shipment worldwide. Variations of MCX and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to FAKRA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W19992/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Cable Using LMR-400 Coax with HeatShrink., Pasternack’s PE3W19992/BK/HS SMA female to SMA male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W19992/BK/HS can also be known as a SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19992/BK/HS RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA female to SMA male cable has a maximum VSWR of 1.4:1. This PE3W19992/BK/HS SMA jack to SMA plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W19992/BK/HS can also be used in the other direction and will be an SMA male to SMA female cable assembly if the opposite connectivity is required. This SMA jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W05053/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.6/5.6, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm 1.6/5.6 Plug Cable Using 75 Ohm RG59 Coax with HeatShrink., Pasternack’s PE3W05053/BK/HS BNC male to 1.6/5.6 plug RF cable assembly using RG59 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to 1.6/5.6 plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to 1.6/5.6 cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a 1.6/5.6 cable connection on the other. Our BNC to 1.6/5.6 cable assembly has a male gender on end 1 and a plug on end 2. PE3W05053/BK/HS can also be known as a BNC plug to 1.6/5.6 male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. Our PE3W05053/BK/HS RF cable has a pvc (nc) jacket of 0.242-inch diameter. The flexible RF cable has a between series connection. This PE3W05053/BK/HS BNC plug to 1.6/5.6 male cable assembly is built with RG59, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.6/5.6 cable connectors, has a 75 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05053/BK/HS can also be used in the other direction and will be a 1.6/5.6 plug to BNC male cable assembly if the opposite connectivity is required. This BNC plug to 1.6/5.6 male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of BNC and 1.6/5.6 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to 1.6/5.6 RF cable assembly as per your requirements. | 0 | |||
| PE3C7505/BK/HS | Pasternack Enterprises | 0 | ||||
| PE3C3217/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to SMA Male Cable Using LMR-195 Coax with HeatShrink., Pasternack’s PE3C3217/BK/HS SMA female to SMA male RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity SMA cable connection on one end and an SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C3217/BK/HS can also be known as a reverse polarity SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3217/BK/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3C3217/BK/HS reverse polarity SMA jack to SMA plug cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3217/BK/HS can also be used in the other direction and will be an SMA male to reverse polarity SMA female cable assembly if the opposite connectivity is required. This SMA reverse polarity jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3522/BK/HS | Pasternack Enterprises | 0 | ||||
| PE3C10380/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using TCOM-195 Coax with HeatShrink., Pasternack’s PE3C10380/BK/HS type N male to TNC male RF cable assembly using TCOM-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C10380/BK/HS can also be known as a type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10380/BK/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This PE3C10380/BK/HS type N plug to TNC plug cable assembly is built with TCOM-195, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10380/BK/HS can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. This type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3W05049/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: D-Sub, Connector 2 Gender: Receptacle, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. BNC Male to D-Sub Receptacle Cable Using PE-C100-LSZH Coax with HeatShrink., Pasternack’s PE3W05049/BK/HS BNC male to D-Sub receptacle RF cable assembly using PE-C100-LSZH coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to D-Sub receptacle cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to D-Sub cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a D-Sub cable connection on the other. Our BNC to D-Sub cable assembly has a male gender on end 1 and a receptacle on end 2. PE3W05049/BK/HS can also be known as a BNC plug to D-Sub receptacle cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05049/BK/HS RF cable has an lszh jacket of 0.109-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05049/BK/HS BNC plug to D-Sub receptacle cable assembly is built with PE-C100-LSZH, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to D-Sub cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05049/BK/HS can also be used in the other direction and will be a D-Sub receptacle to BNC male cable assembly if the opposite connectivity is required. This BNC plug to D-Sub receptacle cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to D-Sub cable assembly for quick shipment worldwide. Variations of BNC and D-Sub cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to D-Sub RF cable assembly as per your requirements. | 0 | |||
| PE3W05117LF/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Female to Water Blue FAKRA Jack Right Angle Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3W05117LF/BK/HS SMA female to right angle FAKRA jack RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and a right angle FAKRA cable connection on the other. Our SMA to FAKRA cable assembly has a female gender on end 1 and a jack on end 2. PE3W05117LF/BK/HS can also be known as a SMA jack to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05117LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA female to right angle FAKRA jack cable has a maximum VSWR of 1.4:1. This PE3W05117LF/BK/HS SMA jack to FAKRA female cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05117LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to SMA female cable assembly if the opposite connectivity is required. This SMA jack to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to FAKRA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W18144/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMB Jack to BNC Male Cable Using LMR-100A-UF Coax with HeatShrink., Pasternack’s PE3W18144/BK/HS SMB jack to BNC male RF cable assembly using LMR-100A-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a BNC cable connection on the other. Our SMB to BNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W18144/BK/HS can also be known as a SMB female to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18144/BK/HS RF cable has a tpe jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMB jack to BNC male cable has a maximum VSWR of 1.4:1. This PE3W18144/BK/HS SMB female to BNC plug cable assembly is built with LMR-100A-UF, which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W18144/BK/HS can also be used in the other direction and will be a BNC male to SMB jack cable assembly if the opposite connectivity is required. This SMB female to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to BNC RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W01214/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-UF Coax with HeatShrink., Pasternack’s PE3W01214/BK/HS TNC male to TNC male RF cable assembly using LMR-400-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W01214/BK/HS can also be known as a TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01214/BK/HS RF cable has a tpe jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. This PE3W01214/BK/HS TNC plug to TNC plug cable assembly is built with LMR-400-UF, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W03560/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Male Cable Using LMR-195 Coax with HeatShrink, LF Solder., Pasternack’s PE3W03560/BK/HS right angle TNC male to type N male RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle TNC cable connection on one end and a type N cable connection on the other. Our TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W03560/BK/HS can also be known as a right angle TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03560/BK/HS RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W03560/BK/HS TNC plug to type N plug cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03560/BK/HS can also be used in the other direction and will be a type N male to right angle TNC male cable assembly if the opposite connectivity is required. This TNC right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W05021/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: Mini SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Female Bulkhead to 75 Ohm Mini SMB Plug Cable Using 75 Ohm RG59 Coax with HeatShrink., Pasternack’s PE3W05021/BK/HS BNC female bulkhead to mini SMB plug RF cable assembly using RG59 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to mini SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to mini SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a mini SMB cable connection on the other. Our BNC to mini SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W05021/BK/HS can also be known as a BNC jack to mini SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. Our PE3W05021/BK/HS RF cable has a pvc (nc) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. This PE3W05021/BK/HS BNC jack to mini SMB male cable assembly is built with RG59, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to mini SMB cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05021/BK/HS can also be used in the other direction and will be a mini SMB plug to BNC female bulkhead cable assembly if the opposite connectivity is required. This BNC jack bulkhead to mini SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to mini SMB cable assembly for quick shipment worldwide. Variations of BNC and mini SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to mini SMB RF cable assembly as per your requirements. | 0 | |||
| PE3W05069/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to Reverse Polarity BNC Male Right Angle Cable Using LMR-100A-UF Coax with HeatShrink., Pasternack’s PE3W05069/BK/HS 1.0/2.3 plug to right angle BNC male RF cable assembly using LMR-100A-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to BNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.0/2.3 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.0/2.3 cable connection on one end and a right angle reverse polarity BNC cable connection on the other. Our 1.0/2.3 to reverse polarity BNC cable assembly has a plug gender on end 1 and a male on end 2. PE3W05069/BK/HS can also be known as a 1.0/2.3 male to right angle reverse polarity BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05069/BK/HS RF cable has a tpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05069/BK/HS 1.0/2.3 male to reverse polarity BNC plug cable assembly is built with LMR-100A-UF, which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05069/BK/HS can also be used in the other direction and will be a right angle reverse polarity BNC male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. This 1.0/2.3 male to BNC reverse polarity right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to BNC cable assembly for quick shipment worldwide. Variations of 1.0/2.3 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 to BNC RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | ATMEGAS64M1-KH-SV | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, AVR RISC CPU, 8MHz, CMOS, CQFP32 RoHS : Compliant | 11,765 | ||
| AP9214L-AK-HSB-7 | Diodes Incorporated | Power Supply Support Circuit, Fixed, 1 Channel, +4.25V, CMOS, PDSO6 | 11,476 | |||
| S32M276CHABMKHST | NXP Semiconductors | RoHS : Compliant | 8,511 | |||
| NOKHSMG-C170 | Broadcom Limited | 8,307 | ||||
| AFV141KHSR5 | NXP Semiconductors | RF Power Field-Effect Transistor, 2-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 5,037 | |||
| S32M276LHABMKHST | NXP Semiconductors | RoHS : Compliant | 4,881 | |||
| MRF6VP41KHSR5 | NXP Semiconductors | RF Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 2,906 | |||
![]() Win Source Electronics | KHS42E | Others |
| 11,200 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |