Electronic Components Datasheet Search
  English  ▼

X  



HSM103 Distributor
DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

TME		SSR21NHS-M10345

 KEMET Corporation Inductor: wire; THT; 34.5mH; 1A; R: 510mΩ; 250VAC; -25÷120°C
RoHS : Compliant
1,020 : $1.26
540 : $1.29
420 : $1.31
300 : $1.34
120 : $1.41
60 : $1.49
25 : $1.59
10 : $1.73
1 : $2.15
0

Avnet Americas		HSM1033-K1100-9H

 Foxconn Interconnect Technology Limited - Trays (Alt: HSM1033-K1100-9H)
RoHS : Not Compliant
0
SSR21NHS-M10345

 KEMET Corporation Choke, Common Mode, 34.5 mH, 1 A - Trays (Alt: SSR21NHS-M10345)
RoHS : Compliant
6,720 : $1.15178
3,360 : $1.17846
1,680 : $1.20947
840 : $1.27065
420 : $1.31314
0

Mouser Electronics		HFHS-M10-30

 PennEngineering (PEM) Screws & Fasteners STUD, HEAVY HEAD, STAINLESS
RoHS : Compliant
1 : $1.92
10 : $1.49
25 : $1.37
100 : $1.22
300 : $1.14
500 : $1.08
1,000 : $1.03
2,500 : $0.99
5,000 : $0.964
442
SSR21NHS-M10345

 KEMET Corporation Common Mode Chokes / Filters 250VAC 34.5mH 1A 20.9mm DCR=0.51mOhms
RoHS : Compliant
1 : $2.31
10 : $1.9
25 : $1.63
120 : $1.53
540 : $1.35
1,020 : $1.32
387
AETHS-M10-3.5ZI

 Atlas Technologies & Manufacturing Inc Screws & Fasteners Atlas Rivet Nut, Atlas FM, AETH, Thin Head Semihex Body, Open End, Steel, Thread Size - M10,
25,000 : $0.206
0
HFHS-M10-35

 PennEngineering (PEM) Screws & Fasteners STUD, HEAVY HEAD, STAINLESS
RoHS : Compliant
10,000 : $1.03
0
AEFHS-M10-3.5ZI

 Atlas Technologies & Manufacturing Inc Screws & Fasteners Atlas Rivet Nut, Atlas FM, AEFH, Flat Head Semihex Body, Open End, Steel, Thread Size - M10,
25,000 : $0.206
0
AEFHHS-M10-3.5ZI

 Atlas Technologies & Manufacturing Inc Screws & Fasteners Atlas Rivet Nut, Atlas FM, AEFHH, Flat Head Hex Body, Open End, Steel, Thread Size - M10,
25,000 : $0.23
0
AETHHS-M10-3.5ZI

 Atlas Technologies & Manufacturing Inc Screws & Fasteners Atlas Rivet Nut, Atlas FM, AETHH, Thin Head Hex Body, Open End, Steel, Thread Size - M10,
25,000 : $0.254
0

Newark		SSR21NHS-M10345

 KEMET Corporation Common Mode Choke, 34.5Mh, 1A; |Kemet SSR21NHS-M10345
RoHS : Compliant
1 : $2.56
10 : $2.16
25 : $1.9
50 : $1.87
100 : $1.83
500 : $1.8
1,000 : $1.62
2,500 : $1.59
0

RS		SSR21NHS-M10345

 KEMET Corporation AC LINE FILTER, CMC 34.5MH 1.0A 0.51? WIDE IMPEDANCE TH
RoHS : Compliant
420 : $1.39
840 : $1.351
0

Bisco Industries		HFHS-M10-30

 PennEngineering (PEM)
700

Avnet Abacus		SSR21NHS-M10345

 KEMET Corporation Choke Common Mode 345 mH 1 A (Alt: SSR21NHS-M10345)
RoHS : Compliant
0

DB Roberts		AETHHS-M10-3.5ZI

 PennEngineering (PEM) Full hex feature for high torque applications.Allows near-flush installations with no need for special hole preparations.Standard material Low Carbon Steel.Materials available on special order 300 Series Stainless Steel Alloy No. 260 Brass 6053-T4 or 60
1 : $0.5049
100 : $0.3548
500 : $0.2793
1,000 : $0.2303
5,000 : $0.2188
21,836
HFHS-M10-30

 PennEngineering (PEM) PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly
1 : $0.9897
100 : $0.7615
500 : $0.7615
1,000 : $0.7615
5,000 : $0.7385
7,288
AEFHS-M10-3.5ZI

 PennEngineering (PEM)
1 : $0.8377
100 : $0.5886
400 : $0.5886
400
AETHS-M10-3.5BZI

 PennEngineering (PEM) Semihex body for improved torque-out resistance.Allows near-flush installations with no need for special hole preparations.Standard material Low Carbon Steel.Materials available on special order 300 Series Stainless Steel Alloy No. 260 Brass 6053-T4 or
0
AETHS-M10-3.5ZN

 PennEngineering (PEM) Semihex body for improved torque-out resistance.Allows near-flush installations with no need for special hole preparations.Standard material Low Carbon Steel.Materials available on special order 300 Series Stainless Steel Alloy No. 260 Brass 6053-T4 or
0
AEFHSM103.5

 PennEngineering (PEM)
0
HS-M10-3.5BZI

 PennEngineering (PEM)
0
AEFHHS-M10-3.5ZI

 PennEngineering (PEM) M10
0
AEFHHSM103.5

 PennEngineering (PEM)
0
HFHS-M10-35

 PennEngineering (PEM) PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly
0
AETHS-M10-3.5ZI

 PennEngineering (PEM) Semihex body for improved torque-out resistance.Allows near-flush installations with no need for special hole preparations.Standard material Low Carbon Steel.Materials available on special order 300 Series Stainless Steel Alloy No. 260 Brass 6053-T4 or
0

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com