HS941XT Price, Distributor, Stock

Right-Angle Key; For Use With:Idec Hs5B Series Interlock Switches; Product Range:-; Contact Current Max:10A Rohs Compliant: Yes |Idec HS9Z-A52
RoHS : Compliant

1 : $13.62
5 : $12.63
10 : $11.76
25 : $10.76
50 : $10.54
100 : $10.33
250 : $10.11

110

HS9Z-A55

IDEC Corporation

Flexible Switch Key; For Use With:Idec Hs5B Series Interlock Switches; Product Range:-; Contact Current Max:10A Rohs Compliant: Yes |Idec HS9Z-A55
RoHS : Compliant

1 : $13.09
5 : $12.14
10 : $11.31
25 : $10.36
50 : $10.15
100 : $9.95
250 : $9.74

HS9Z-A52A

IDEC Corporation

Actuator Key, Right Angle; For Use With:Idec Hs5D Series Interlock Switches; Product Range:-; Operating Force Max:50N; Over Travel Min:10Mm Rohs Compliant: Yes |Idec HS9Z-A52A
RoHS : Compliant

1 : $16.47
5 : $15.28
10 : $14.97
25 : $14.67
50 : $14.36
100 : $14.06
250 : $13.75

HS9Z-A51A

IDEC Corporation

Flat Actuator; For Use With:Idec Hs5D Series Interlock Switches; Product Range:-; Operating Force Max:50N; Over Travel Min:10Mm Rohs Compliant: Yes |Idec HS9Z-A51A
RoHS : Compliant

1 : $18.36
5 : $17.01
10 : $15.84
25 : $14.49
50 : $14.2
100 : $13.91
250 : $13.62

HI9P0201HS-9Z

Renesas Electronics Corporation

Analogue Sw, Spst - Nc, -40 To 85Deg C; |Renesas Electronics Corporation HI9P0201HS-9Z
RoHS : Compliant

1 : $25.19
10 : $20.14
25 : $18.87
50 : $18.18
100 : $17.49
250 : $16.83
500 : $16.43

HS9Z-A55

IDEC Corporation

Actuator, Safety Sw, Angle Adjustable; |Idec HS9Z-A55
RoHS : Compliant

1 : $15.74
50 : $14.4
100 : $13.3
250 : $12.45
500 : $11.72

HS9Z-A52

IDEC Corporation

Actuator, Safety Sw, Right-Angle, Ip67; |Idec HS9Z-A52
RoHS : Compliant

1 : $6.37
10 : $6.01
25 : $5.32
50 : $4.74
100 : $4.55
250 : $4.36
500 : $4.07
1,000 : $3.93

HS9Z-A5P

IDEC Corporation

Actuator, Interlock Switch, Plug; |Idec HS9Z-A5P
RoHS : Compliant

1 : $46.87
5 : $43.41
10 : $40.38
25 : $39.57
50 : $38.76
100 : $37.96

HS9Z-A2

IDEC Corporation

Actuator, Interlock Switch, Right Angle; |Idec HS9Z-A2
RoHS : Compliant

1 : $11.63
5 : $11.4
10 : $11.16
25 : $10.93
50 : $10.7
100 : $10.47
250 : $10.23

HS9Z-ZC1

IDEC Corporation

Actuator, Coded Magnetic Switch; |Idec HS9Z-ZC1
RoHS : Compliant

1 : $36.8
5 : $34.17
10 : $33.49
25 : $32.8
50 : $32.12
100 : $31.44

HS9Z-A55S

IDEC Corporation

Actuator, Interlock Sw, Angle Adjustable; |Idec HS9Z-A55S
RoHS : Compliant

1 : $19.3
5 : $18.21
10 : $17.11
25 : $16.44
50 : $15.69
100 : $15.19
250 : $14.36

HS9Z-A3S

IDEC Corporation

Actuator, Safety Sw, Angle Adjustable; |Idec HS9Z-A3S
RoHS : Compliant

1 : $28.22
5 : $26.11
10 : $24.24
25 : $22.13
50 : $21.69
100 : $21.24
250 : $20.8

HS9Z-A12T

IDEC Corporation

Actuator, Safety Interlock Switch; |Idec HS9Z-A12T
RoHS : Compliant

1 : $30.82
5 : $28.48
10 : $27.31
25 : $27.21
50 : $27.11
100 : $27.01
250 : $23.88

HS9Z-A52A

IDEC Corporation

IDEC ACTUATOR, FOR USE WITH HS5D & HS5E SAFETY SWITCH, HS9Z SERIES

1 : $14.88
5 : $13.69

149

HS9Z-A62

IDEC Corporation

ACTUATOR, FOR USE WITH HS6B & HS6E SAFETY SWITCH, HS9Z SERIES

1 : $9.08
5 : $8.35
10 : $7.99
20 : $7.26

121

HS9Z-A51

IDEC Corporation

ACCESSORY, STRAIGHT KEY FOR HS5B AND HS5E SAFETY SWITCH, HS9Z SERIES

1 : $11.83
5 : $10.89

HS9Z-A51A

IDEC Corporation

IDEC ACTUATOR, FOR USE WITH HS5D & HS5E SAFETY SWITCH

1 : $17.32
5 : $15.93
10 : $14.72
20 : $13.33

HS 903

Steel City

STEEL TWO HOLE STRAP, 1", ZINC PLATED

1 : $0.24

HS9Z-A5P

IDEC Corporation

SWITCH SAFETY PLUG ACTUATOR FOR HS5D& HS5E

1 : $43.25
5 : $39.79

HS9Z-A1S

IDEC Corporation

ACTUATOR, FOR USE WITH HS1E SOLENOID LOCKING SAFETY SWITCH

1 : $24.56
5 : $22.6
10 : $20.88
20 : $18.91

HS 910

Steel City

STEEL TWO HOLE STRAP, 4", ZINC PLATED

1 : $2.69

HS9Z-A2S

IDEC Corporation

IDEC ACTUATOR, FOR USE WITH HS1E SAFETY SWITCH

1 : $23.11
5 : $21.26
10 : $19.64

HS9Z-A3S

IDEC Corporation

ACTUATOR KEY ADJUSTABLE TYPE

1 : $26.3
5 : $24.2
10 : $22.36
20 : $20.25

HS9Z-SP51

IDEC Corporation

SWITCH SAFETY MOUNTING PLATE FOR HS5E

1 : $30.71

RHS90A

Carlo Gavazzi Holding AG

HEATSINK, RHS SOLID STATE RELAY, 0.97DEGC/W, 80 X 90 X 103MM, DIN RAIL MOUNT

1 : $78.49
10 : $74.56
25 : $70.64

HS9Z-FL53

IDEC Corporation

SAFTEY SWITCH UNLOCK BUTTON

1 : $64.56

HS9Z-SH5

IDEC Corporation

SWITCH SAFETY SLIDING ACTUATOR FOR HS5D& HS5E

1 : $144.61

HS9

Apex Tool Group LLC

XCELITE, NUTDRIVER, 9/32 IN. X 3 1/8 IN. FULL HOLLOW SHAFT , ORANGE HANDLE

1 : $6.6

Rochester Electronics

IRFHS9301TRPBF

Infineon Technologies AG

IRFHS9301 - 30V Single P-Channel HEXFET Power MOSFET
RoHS : Not Compliant

100,000 : $0.1524
10,000 : $0.1819
1,000 : $0.204
500 : $0.2212
100 : $0.2458

THS9000DRDT

Texas Instruments

Wide Band Medium Power Amplifier, 50MHz Min, 400MHz Max '
RoHS : Not Compliant

10,000 : $1.47
1,000 : $1.56
500 : $1.66
100 : $1.75
25 : $1.84

1,475

THS9001DBVT

Texas Instruments

RF Amplifier 50MHz 350MHz 20.6dBm SOT-23-6 T/R
RoHS : Compliant

100,000 : $0.8432
10,000 : $1.01
1,000 : $1.13
500 : $1.22
100 : $1.36

118,925

THS9000DRWT

Texas Instruments

RF Amplifier 50MHz 750MHz 20.8dBm 6-SON T/R
RoHS : Compliant

100,000 : $0.8804
10,000 : $1.05
1,000 : $1.18
500 : $1.28
100 : $1.42

139,537

THS9001DBVR

Texas Instruments

Wide Band Medium Power Amplifier, 50MHz Min, 350MHz Max
RoHS : Compliant

10,000 : $1.03
1,000 : $1.1
500 : $1.16
100 : $1.23
25 : $1.29

23,221

HI3-0201HS-9

Maxim Integrated Products

HI30201 Quad SPST CMOS Analog Switch '
RoHS : Not Compliant

10,000 : $3.26
1,000 : $3.47
500 : $3.67
100 : $3.88
25 : $4.08

HI6-0201HS-9W+

Maxim Integrated Products

SPST
RoHS : Compliant

10,000 : $3.82
1,000 : $4.06
500 : $4.3
100 : $4.54
25 : $4.78

503

Sager

HW-14-20-H-S-975-SM

Samtec Inc

Board to Board & Mezzanine Connectors
RoHS : Compliant

HS9Z-LH5

IDEC Corporation

Switch Actuators HS5 Plastic slide handle act

1 : $335.01
2 : $325.44
5 : $316.41

HS909-SS

ABB Group

Conduit Fittings & Accessories

HS9Z-DH5B

IDEC Corporation

Mounting Hardware Door Handle Installation Kit

1 : $56.21
7 : $53.73
15 : $52.2
30 : $50.75

D2E146-HS97-03

ebm-papst

AC CENTRIFUGAL BLOWER

1 : $355.03
2 : $344.89
5 : $335.31
10 : $326.24
20 : $317.66
50 : $309.51

FHS9N-08-10N

Panduit Corp

Fiber Optic Connectors HD Flex 4-port LC Adapter Panel, Blue ad

1 : $246.29
3 : $227.35
6 : $218.93
11 : $218.93
28 : $216.26

44HS90-01-1-03N

Grayhill Inc

Rotary Switches ElectricalSwitch Rotary NotOver5Amp
RoHS : Compliant

10 : $122.83
20 : $121.0
60 : $115.81

44HS90-02-1-02N

Grayhill Inc

Rotary Switches ElectricalSwitch Rotary NotOver5Amp
RoHS : Compliant

10 : $139.62
20 : $137.54
50 : $131.64

FHS9N-12-LAP

Panduit Corp

Fiber Optic Connectors HD Flex LC Splice Cassette Preloaded wit

1 : $676.6
4 : $676.6
9 : $668.35

HW-25-20-H-S-975-SM

Samtec Inc

Board to Board & Mezzanine Connectors
RoHS : Compliant

HS9Z-A15T

IDEC Corporation

Switch Actuators HS1T angle adjustable actuator

1 : $65.56
6 : $62.68
13 : $60.89
26 : $59.2

HS9Z-A2

IDEC Corporation

Switch Hardware Actuator Key Right Angle Type

1 : $10.65
17 : $9.83
43 : $9.4
85 : $9.12
171 : $8.87

44HS90-03-1-04N-C

Grayhill Inc

44HS90-03-1-04N-C

10 : $165.41
20 : $162.94
50 : $155.96

HW-24-20-H-S-975-SM

Samtec Inc

Board to Board & Mezzanine Connectors
RoHS : Compliant

HS901-10

ABB Group

1/2 STRAP, RGD/IMC,STL,2 HOLE,10/BG

20 : $16.34
60 : $15.88
100 : $15.43
220 : $14.82

Coilcraft Direct

1008HS-911TGLC

Coilcraft Inc

RF inductor, ceramic core, 2% tol, SMT, RoHS
RoHS : Compliant

1 : $1.34
200 : $1.09
500 : $0.81
1,000 : $0.55
2,000 : $0.36
4,000 : $0.3

1,320

1008HS-911TJLC

Coilcraft Inc

RF inductor, ceramic core, 5% tol, SMT, RoHS
RoHS : Compliant

1 : $1.06
200 : $0.87
500 : $0.65
1,000 : $0.45
2,000 : $0.3
4,000 : $0.25

1,320

1008HS-911TGRC

Coilcraft Inc

RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free R
RoHS : Compliant

1 : $1.12
200 : $0.91
500 : $0.68
1,000 : $0.46
2,000 : $0.3
4,000 : $0.26

1008HS-911TJRC

Coilcraft Inc

RF inductor, ceramic core, 5% tol, SMT, Halogen-Free
RoHS : Compliant

1 : $0.89
200 : $0.72
500 : $0.54
1,000 : $0.37
2,000 : $0.26
4,000 : $0.21

TME

HH-S96F008-2835-12 GREEN WHITE PCB IP65A

Shenzhen Wisva Optoelectronics Co.,Ltd

LED tape; green; Case (mm): 2835; LED/m: 96; 8mm; white PCB; IP54

25 : $5.47
5 : $5.87
1 : $6.68

185

HH-S96F008-2835-12 NW WHITE PCB IP65A

Shenzhen Wisva Optoelectronics Co.,Ltd

LED tape; white neutral; Case (mm): 2835; LED/m: 96; 8mm; white PCB

25 : $3.32
5 : $3.57
1 : $4.06

130

HH-S96F008-2835-12 GREEN WHITE PCB IP20

Shenzhen Wisva Optoelectronics Co.,Ltd

LED tape; green; Case (mm): 2835; LED/m: 96; 8mm; white PCB; IP20

100 : $3.62
50 : $3.89
25 : $4.07
5 : $4.42
1 : $4.56

125

HH-S96F008-2835-12 WW WHITE PCB IP20

Shenzhen Wisva Optoelectronics Co.,Ltd

LED tape; white warm; Case (mm): 2835; LED/m: 96; 8mm; white PCB

100 : $2.77
25 : $2.95
5 : $3.45
1 : $3.95

125

HH-S96F008-2835-12 YELLOW WHITE PCB IP65

Shenzhen Wisva Optoelectronics Co.,Ltd

LED tape; yellow; Case (mm): 2835; LED/m: 96; 8mm; white PCB; IP65

100 : $4.1
25 : $4.25
5 : $4.41
1 : $4.73

118

HS9Z-A61

IDEC Corporation

Flat key; HS6B

1 : $6.97

HS9Z-A55

IDEC Corporation

Flexible key; HS5D

100 : $11.91
50 : $12.01
1 : $13.9

HS9Z-A66

IDEC Corporation

Flexible key; HS6B

500 : $8.59
50 : $9.31
10 : $9.92
1 : $10.9

BU-60HS-9

Mueller Electric Company

Crocodile clip; 10A; white; Grip capac: max.7.9mm; steel

200 : $0.94
100 : $0.97
50 : $1.01
25 : $1.04
1 : $1.12

HS9Z-ZP1

IDEC Corporation

Actuator; IP67; -25÷85°C; 88x25x13mm

5 : $43.74
1 : $47.11

HS9Z-ZC1

IDEC Corporation

Actuator; IP67; -25÷85°C; 51x16x7mm

5 : $40.27
1 : $43.41

44HS90-05-2-02N

Grayhill Inc

Switch: rotary; Pos: 2; Leads: for soldering; Rcont max: 50mΩ; 44
RoHS : Compliant

1 : $288.56

HH-S96F008-2835-12 RED WHITE PCB IP65A

Shenzhen Wisva Optoelectronics Co.,Ltd

LED tape; red; Case (mm): 2835; LED/m: 96; 8mm; white PCB; IP65; 1114

25 : $3.94
5 : $4.23
1 : $4.82

IRFHS9301TRPBF

Infineon Technologies AG

Transistor: P-MOSFET; unipolar; -30V; -6A; 2.1W; PQFN2X2
RoHS : Compliant

2,000 : $0.231
1,000 : $0.245
500 : $0.285
250 : $0.325
100 : $0.379
50 : $0.421
10 : $0.517
1 : $0.7

SIHS90N65E-GE3

Vishay Intertechnologies

Transistor: N-MOSFET; unipolar; 650V; 87A; 625W; TO274AA

480 : $19.29

ComSIT USA

DHS908

knitter-switch

AVAILABLE EU
RoHS : Compliant

3,723

ComSIT USA

HS9001

Magnetic Communication Corporation

Electronic Component
RoHS : Compliant

400

Interstate Connecting Components

447HS912-09

Glenair Inc

BANDING CRIMP ADAPTER

447HS942MT1711

Glenair Inc

447HS912-11

Glenair Inc

BANDING CRIMP ADAPTER

447HS919NF21-2

Glenair Inc

MICRO-D BACKSHELL

447HS922XM1505KS

Glenair Inc

BANDING CRIMP ADAPTER

447HS967NF09

Glenair Inc

BANDING CRIMP ADAPTER

447HS918NF17-3

Glenair Inc

MICRO-D BACKSHELL

447HS919NF25-1

Glenair Inc

MICRO-D BACKSHELL

447HS967M21

Glenair Inc

BANDING BACKSHELL

447HS922XM1505B

Glenair Inc

BANDING CRIMP ADAPTER

447HS922XM2508KS

Glenair Inc

BANDING CRIMP ADAPTER

447HS942NF1504

Glenair Inc

BANDING CRIMP ADAPTER

447HS967Z111

Glenair Inc

BANDING CRIMP ADAPTER

HS95DCS

Amphenol Sine Systems

SOCKET CONTACT RADSOK 10,0 MM

447HS967M17

Glenair Inc

BANDING CRIMP ADAPTER

PEI Genesis

HS95DCS

Amphenol Sine Systems

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

Powell Electronics

BU-60HS-9

Mueller Electric Company

White Alligator Steel Clip Acetate Handl

127 : $1.2121
838 : $1.1019

1,993

BU-60CHS-9

Mueller Electric Company

White Alligator Copper Clip Acetate Hand

76 : $2.0262
502 : $1.842

465

447HS942NF1707

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $529.39
5 : $137.61
10 : $60.03
25 : $57.72

447HS942NF1708

Glenair Inc

BACKSHELL

1 : $373.73
5 : $349.28

447HS942Z11104

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $373.73
5 : $349.28

447HS942Z11506

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $1,533.6
5 : $1,433.27

447HS942NF0903

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $608.53
5 : $568.72

447HS942NF1305

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $512.76

447HS942Z11505

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $373.73

447HS967Z117K

Glenair Inc

STAINLESS STEEL - BANDING/CRIMP ADAPTER

1 : $674.79

447HS918M11-2

Glenair Inc

ACCESSORIES - BANDING/CRIMP ADAPTER

1 : $868.94

Chip 1 Exchange

LQG15HS9N1J02D

INSTOCK

49,245

Avnet Abacus

DHS 902

knitter-switch

(Alt: DHS 902)
RoHS : Compliant

HS95DCS

Amphenol Corporation

(Alt: HS95DCS)
RoHS : Compliant

DHS 904

knitter-switch

(Alt: DHS 904)
RoHS : Compliant

DHS 912

knitter-switch

(Alt: DHS 912)
RoHS : Compliant

DHS 910-J

knitter-switch

(Alt: DHS 910-J)
RoHS : Compliant

DHS 904-J

knitter-switch

(Alt: DHS 904-J)
RoHS : Compliant

DHS 901-J

knitter-switch

DIP Switch halfpitch (Alt: DHS 901-J)
RoHS : Compliant

HS9230810000G

Amphenol Corporation

(Alt: HS9230810000G)
RoHS : Compliant

HS9600800000G

Amphenol Corporation

(Alt: HS9600800000G)
RoHS : Compliant

HS9630800000G

Amphenol Corporation

(Alt: HS9630800000G)
RoHS : Compliant

LQG15HS9N1J02D

Murata Manufacturing Co Ltd

(Alt: LQG15HS9N1J02D)
RoHS : Compliant

44HS90-02-2-02N

Grayhill Inc

Switch Rotary DPDT 2 Flatted Shaft Solder Lug 5A 115VAC 28VDC (Alt: 44HS90-02-2-02N)
RoHS : Compliant

44HS90-04-2-02N

Grayhill Inc

Switch Rotary DPDT 2 Flatted Shaft Solder Lug 5A 115VAC 28VDC (Alt: 44HS90-04-2-02N)
RoHS : Compliant

44HS90-03-1-04N

Grayhill Inc

Rotary Switch 1Inch Diameter 1 Amp Standard ShaftPanel Seal 90 Throw 3 Deck 1 Pole 4 Position No (Alt: 44HS90-03-1-04N)
RoHS : Compliant

44HS90-01-1-04N-F

Grayhill Inc

(Alt: 44HS90-01B04N)
RoHS : Compliant

Avnet Asia

LQG15HS9N1J02D

Murata Manufacturing Co Ltd

(Alt: LQG15HS9N1J02D)
RoHS : Compliant

LQG15HS9N1G02D

Murata Manufacturing Co Ltd

(Alt: LQG15HS9N1G02D)
RoHS : Compliant

Avnet Silica

HS9-139EH-Q

Renesas Electronics Corporation

(Alt: HS9-139EH-Q)
RoHS : Compliant

HS9-4424EH-Q

Renesas Electronics Corporation

(Alt: HS9-4424EH-Q)
RoHS : Compliant

HS9-303BRH-Q

Renesas Electronics Corporation

(Alt: HS9-303BRH-Q)
RoHS : Compliant

HS9-303AEH-Q

Renesas Electronics Corporation

(Alt: HS9-303AEH-Q)
RoHS : Compliant

HS9-1825ARH-Q

Renesas Electronics Corporation

(Alt: HS9-1825ARH-Q)
RoHS : Compliant

HS9-26C31EH-Q

Renesas Electronics Corporation

(Alt: HS9-26C31EH-Q)
RoHS : Compliant

HS9-26C31RH-T

Renesas Electronics Corporation

(Alt: HS9-26C31RH-T)
RoHS : Compliant

HS9-26CT31RH-Q

Renesas Electronics Corporation

Differential Line Driver 4 Drivers RS422 5 V 16 Pins CFPAK (Alt: HS9-26CT31RH-Q)
RoHS : Compliant

HS9G-26CLV31EH-Q

Renesas Electronics Corporation

(Alt: HS9G-26CLV31EH-Q)
RoHS : Compliant

HS9-4424BRH/PROTO

Renesas Electronics Corporation

(Alt: HS9-4424BRH/PROTO)
RoHS : Compliant

HS9-1825ARH/PROTO

Renesas Electronics Corporation

(Alt: HS9-1825ARH/PROTO)
RoHS : Compliant

HS9-26CT32RH/PROTO

Renesas Electronics Corporation

(Alt: HS9-26CT32RH/PROTO)
RoHS : Not Compliant

HS9-26CT31RH/PROTO

Renesas Electronics Corporation

(Alt: HS9-26CT31RH/PROTO)
RoHS : Compliant

HS9-26CLV31RH/PROTO

Renesas Electronics Corporation

(Alt: HS9-26CLV31RH/PROTO)
RoHS : Compliant

HS9G-26CLV32RH/PROTO

Renesas Electronics Corporation

Differential Line Receiver 3 V to 36 V RS422 4 Drivers 16 Pins CFPAK (Alt: HS9G-26CLV32RH/PROTO)
RoHS : Compliant

DB Roberts

HG-JHS9-U-BL

Sugatsune Kogyo Co Ltd

AEHS9035S

PennEngineering (PEM)

AEHS9-616-150

PennEngineering (PEM)

AEHS9-616-312

PennEngineering (PEM)

HG-JHS9-S-WT

Sugatsune Kogyo Co Ltd

LIFT ASSIST DAMPER HINGE SIDE

HG-JHS9-S-BL

Sugatsune Kogyo Co Ltd

AEHS9-420-165

PennEngineering (PEM)

TLHS90-300-01

Essentra Components

EBV Elektronik

RF112L0HS9B

NXP Semiconductors

HVQFN64 RF112L0H Transceiver 12NC 935397589557 (Alt: RF112L0HS9B)
RoHS : Compliant

SIHS90N65E-GE3

Vishay Intertechnologies

NCHANNEL 650V (Alt: SIHS90N65E-GE3)
RoHS : Compliant

SST-10-IRD-B90H-S940

Luminus Devices

Infrared LED Emitter 970nm 770mWsr 350mA 32V 3Pin SMD TR (Alt: SST-10-IRD-B90H-S940)
RoHS : Compliant

SST-10-IRD-B50H-S940

Luminus Devices

(Alt: SST-10-IRD-B50H-S940)
RoHS : Compliant

SST-10-IRD-B130H-S940

Luminus Devices

(Alt: SST-10-IRD-B130H-S940)
RoHS : Compliant

BOXNUC5I5RYHS 999CG5

Intel Corporation

SBC x8664 Intel Core i55257U Dual Core Box (Alt: 999CG5)
RoHS : Compliant

Master Electronics

HS9Z-A55

IDEC Corporation

The HS9Z-A55 is an angle-adjustable actuator key for safety interlock switches designed for both horizontal and vertical operation.
RoHS : Compliant

1,000 : $7.95
500 : $7.97
250 : $7.99
100 : $8.04
50 : $8.39
25 : $9.03
5 : $11.23

BU-60HS-9

Mueller Electric Company

White Alligator Steel Clip Acetate Handle & Screw - 10 Amp
RoHS : Compliant

10,000 : $1.02
7,500 : $1.03
5,000 : $1.04
2,500 : $1.05
1,000 : $1.09
500 : $1.16
250 : $1.28
25 : $2.07

HS9Z-DH5B

IDEC Corporation

Door Handle Installation Kit Rohs Compliant: Yes |Idec HS9Z-DH5B
RoHS : Compliant

250 : $37.75
100 : $37.99
50 : $38.48
25 : $39.27
10 : $40.12
5 : $40.74
1 : $43.23

HS9

Crydom Inc

Heat Sink Passive Screw Aluminum 1.5°C/W Black Anodized
RoHS : Compliant

250 : $20.03
100 : $20.44
50 : $20.86
25 : $21.28
10 : $21.72
5 : $22.16
1 : $22.61

HW-14-20-H-S-975-SM

Samtec Inc

Conn Board Stacker HDR 14 POS 2.54mm Solder ST SMD
RoHS : Compliant

5,000 : $2.04
2,500 : $2.84
1,000 : $3.71
500 : $4.14
250 : $5.63
100 : $5.88
25 : $6.35
5 : $7.58

HS9Z-LH5

IDEC Corporation

RoHS : Compliant

20 : $278.67
10 : $285.58
5 : $286.3
3 : $290.28
1 : $298.57

HS909-SS

Thomas & Betts

RoHS : Compliant

50 : $89.79
25 : $91.16
15 : $92.54
10 : $97.91
5 : $100.83
1 : $108.96

D2E146-HS97-03

ebm-papst

Fan - Centrifugal - 230VAC - 233x199x218mm - 340 CFM - 215W - 1750RPM - Ball Bearing - IP44
RoHS : Compliant

10 : $286.57
8 : $292.42
5 : $394.0
3 : $533.54
1 : $534.88

HW-25-20-H-S-975-SM

Samtec Inc

RoHS : Compliant

1,000 : $5.21
500 : $6.79
250 : $7.38
100 : $7.81
50 : $10.49
25 : $10.98
5 : $12.12

HS-903

Thomas & Betts

2 HOLE STRAP STL 1/4-SCR
RoHS : Compliant

15,000 : $0.4832
10,000 : $0.4884
7,500 : $0.4896
5,000 : $0.503
2,500 : $0.5172
1,000 : $0.5481
300 : $0.5737
100 : $0.7062

HS9Z-A15T

IDEC Corporation

HS1T Angle Adjustable Actuator.
RoHS : Compliant

250 : $51.45
100 : $52.13
50 : $53.56
25 : $55.86
10 : $58.36
5 : $60.15
1 : $67.41

HS9Z-A2

IDEC Corporation

Switch Access Right Angle Actuator Door Interlock Switch
RoHS : Compliant

1,000 : $7.71
500 : $7.81
250 : $8.03
100 : $8.49
50 : $8.75
25 : $9.16
5 : $10.1

HW-24-20-H-S-975-SM

Samtec Inc

Conn Board Stacker HDR 24 POS 2.54mm Solder ST SMD
RoHS : Compliant

1,000 : $5.0
500 : $6.52
250 : $7.08
100 : $7.49
50 : $10.07
25 : $10.55
5 : $11.64

HS901-10

Thomas & Betts

1/2 STRAP RGD/IMC STL 2 H
RoHS : Compliant

1,000 : $12.18
500 : $12.35
260 : $12.69
100 : $13.23
60 : $13.42
40 : $13.82
20 : $14.47

HS9Z-BA5

IDEC Corporation

SPRING LOADED ACTUATOR
RoHS : Compliant

100 : $153.46
50 : $157.5
20 : $163.56
10 : $163.97
5 : $166.25
1 : $171.0

Pasternack Enterprises US

PE3W09200LF/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SSMC Plug to SSMC Plug Right Angle Cable 9 Inch Length Using PE-SR047FL Coax with HeatShrink, LF Solder., Radio frequency assembly SSMC plug to SSMC plug right angle cable 9 inch length using PE-SR047FL coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMC plug to SSMC plug right angle cable 9 inch length using PE-SR047FL coax with heatshrink, LF solder, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and right angle SSMC cable connection on the other. Our SSMC to right angle SSMC cable assemblies have a plug gender on end 1 and plug on end 2. This SSMC to SSMC cable is a plug to plug coax assembly, PE3W09200LF/HS-9, can also be known as a SSMC male to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC male cable assembly PE3W09200LF/HS-9 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SSMC cable assembly is manufactured with SSMC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SSMC plug to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09200LF/HS-9 can also be used in the other direction and will be right angle SSMC plug to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SSMC plug right angle cable 9 inch length using PE-SR047FL coax with heatshrink, LF solder.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

334

PE3W19360/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMA Male Cable 9 Inch Length Using TCOM-400 Coax with HeatShrink., Pasternack’s PE3W19360/HS-9 SMA male to SMA male RF cable assembly using TCOM-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19360/HS-9 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.705-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19360/HS-9 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W19360/HS-9 SMA plug to SMA plug cable assembly is built with TCOM-400, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $131.4425
25 : $124.87
50 : $118.3
100 : $113.04

317

PE3W20796/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. TNC Male to SMA Male Cable 9 Inch Length Using TCOM-400 Coax with HeatShrink., Pasternack’s PE3W20796/HS-9 TNC male to SMA male RF cable assembly using TCOM-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and an SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20796/HS-9 can also be known as a TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.705-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20796/HS-9 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our TNC male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20796/HS-9 TNC plug to SMA plug cable assembly is built with TCOM-400, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20796/HS-9 can also be used in the other direction and will be an SMA plug to TNC plug cable assembly if the opposite connectivity is required. This TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements.

1 : $163.4425
25 : $155.27
50 : $147.1
100 : $140.56

317

PE3W05799/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. MMCX Plug to SMA Female Bulkhead Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly MMCX plug to SMA female bulkhead cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMA female bulkhead cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and SMA bulkhead cable connection on the other. Our MMCX to SMA cable assembly has plug gender on end 1 and female on end 2. PE3W05799/HS-9 can also be known as a MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to SMA jack cable assembly PE3W05799/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W05799/HS-9 RF cable are available on our downloadable PDF datasheet.PE3W05799/HS-9 can also be used in the other direction and will be SMA female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

293

PE33266/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Female to SMA Female Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA female to SMA female cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA female cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has female gender on end 1 and female on end 2. PE33266/HS-9 can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.394 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA jack to SMA jack cable assembly PE33266/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33266/HS-9 RF cable are available on our downloadable PDF datasheet. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

215

PE3C0349/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMA Female Cable 9 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA female cable 9 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable 9 inch length using PE-SR405FLJ coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C0349/HS-9 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C0349/HS-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0349/HS-9 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 9 inch length using PE-SR405FLJ coax with heatshrink.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

157

PE3W09356/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SSMC Jack Right Angle Bulkhead to MMCX Plug Cable 9 Inch Length Using RG178B/U Coax with HeatShrink., Radio frequency assembly SSMC jack right angle bulkhead to MMCX plug cable 9 inch length using RG178B/U coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMC jack right angle bulkhead to MMCX plug cable 9 inch length using RG178B/U coax with heatshrink, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMC bulkhead cable connection on one end and MMCX cable connection on the other. Our right angle SSMC to MMCX cable assemblies have a jack gender on end 1 and plug on end 2. PE3W09356/HS-9 can also be known as a right angle SSMC female to MMCX male cable assembly and will be shipped same-day as it is purchased. SSMC female to MMCX male cable assembly PE3W09356/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC right angle jack bulkhead to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09356/HS-9 can also be used in the other direction and will be MMCX plug to right angle SSMC jack bulkhead cable assembly if the opposite connectivity is required. SSMC right angle female bulkhead to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to MMCX cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC jack right angle bulkhead to MMCX plug cable 9 inch length using RG178B/U coax with heatshrink.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

123

PE39061/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMP Female Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to SMP female cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assembly has male gender on end 1 and female on end 2. PE39061/HS-9 can also be known as a SMA plug to SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMP jack cable assembly PE39061/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has solder/solder attachment method and beryllium copper body with gold plating.Additional dimensions, specifications and CAD drawings for this PE39061/HS-9 RF cable are available on our downloadable PDF datasheet.PE39061/HS-9 can also be used in the other direction and will be SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $188.99
25 : $179.54
50 : $170.09
100 : $162.53

PE3W16752/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMA Male Cable 9 Inch Length Using TCOM-240 Coax with HeatShrink., Pasternack’s PE3W16752/HS-9 SMA male to SMA male RF cable assembly using TCOM-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W16752/HS-9 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.312-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16752/HS-9 RF cable has a PE jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W16752/HS-9 SMA plug to SMA plug cable assembly is built with TCOM-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $124.4675
25 : $118.24
50 : $112.02
100 : $107.04

PE3C100020/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to MCX Plug Right Angle Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to MCX plug right angle cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle MCX cable connection on the other. Our SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C100020/HS-9 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100020/HS-9 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle MCX plug cable has a maximum VSWR of 1.5:1. SMA plug to MCX male cable assembly PE3C100020/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100020/HS-9 can also be used in the other direction and will be a right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W10796/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. QMA Male Right Angle to QMA Male Right Angle Cable 9 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly QMA male right angle to QMA male right angle cable 9 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male right angle to QMA male right angle cable 9 inch length using PE-SR405FLJ coax with heatshrink, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle QMA cable connection on one end and right angle QMA cable connection on the other. Our right angle QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. PE3W10796/HS-9 can also be known as a right angle QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3W10796/HS-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable QMA cable assembly is manufactured with right angle QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency QMA right angle male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. QMA right angle plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to QMA male right angle cable 9 inch length using PE-SR405FLJ coax with heatshrink.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3C1104/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. Mini SMP Female to 2.92mm Male Cable 9 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly mini SMP female to 2.92mm male cable 9 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable 9 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C1104/HS-9 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1104/HS-9 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our Mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. Mini SMP jack to 2.92mm plug cable assembly PE3C1104/HS-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1104/HS-9 can also be used in the other direction and will be a 2.92mm male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to 2.92mm RF cable assembly as per your requirements.

1 : $166.99
10 : $160.31
25 : $153.63
100 : $146.95

PE35110/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 9 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 9 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMA female 4 hole flange cable 9 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA 4 hole flange cable connection on one end and a SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a female on end 2. PE35110/HS-9 can also be known as a SMA jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our 4 hole flange SMA female to 4 hole flange SMA female cable has a maximum VSWR of 1.4:1. SMA jack to SMA jack cable assembly PE35110/HS-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $106.99
25 : $101.64
50 : $96.29
100 : $92.01

PE3C0099/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Cable 9 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female to SMP female cable 9 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable 9 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C0099/HS-9 can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C0099/HS-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female cable 9 inch length using PE-SR405FLJ coax with heatshrink.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

PE3C1478/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. MMCX Plug Right Angle to MCX Plug Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to MCX plug cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MCX plug cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMCX cable connection on one end and a MCX cable connection on the other. Our right angle MMCX to MCX cable assembly has a plug gender on end 1 and a plug on end 2. PE3C1478/HS-9 can also be known as a right angle MMCX male to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1478/HS-9 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle MMCX plug to MCX plug cable has a maximum VSWR of 1.4:1. MMCX male to MCX male cable assembly PE3C1478/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1478/HS-9 can also be used in the other direction and will be a MCX plug to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MCX RF cable assembly as per your requirements.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41