| Electronic Components Datasheet Search |
|
HS300 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | HS300-5R-F | Ohmite Mfg Co | 300 WATTS AL HOUSED 5 OHMS RoHS : Compliant |
| 37 | |
| HS300-10K-F | Ohmite Mfg Co | RoHS : Compliant |
| 21 | ||
| HS300-2R7-F | Ohmite Mfg Co | RoHS : Compliant |
| 19 | ||
| HS300-4R7-J | Ohmite Mfg Co | RoHS : Compliant |
| 11 | ||
| HS300-4R7-F | Ohmite Mfg Co | RoHS : Compliant |
| 2 | ||
| HS300-TP2 | Ohmite Mfg Co | HS300 RESISTOR THERMAL PAD RoHS : Compliant |
| 0 | ||
| HS300-R3-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-150R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-3K9-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-30R-F | Ohmite Mfg Co | 300 WATTS AL HOUSED30 OHMS RoHS : Compliant |
| 0 | ||
| HS300-R1-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-3K3-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-R15-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-560R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS300-25R-J | Ohmite Mfg Co | 300 WATTS AL HOUSED25 OHMS RoHS : Compliant |
| 0 | ||
![]() Verical | HS3001 | Renesas Electronics Corporation | Humidity/Temperature Sensor Digital Serial (I2C) 6-Pin LGA Reel RoHS : Compliant |
| 2,129 | |
| HS300 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 624 | ||
| HS3003 | Renesas Electronics Corporation | Humidity/Temperature Sensor Digital Serial (I2C) 6-Pin LGA Reel RoHS : Compliant |
| 498 | ||
| HS300 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 433 | ||
| HS300 5R F | Ohmite Mfg Co | Chassis Mount Resistor RoHS : Not Compliant |
| 35 | ||
| HS300 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 32 | ||
| HS300 5R F | Ohmite Mfg Co | Chassis Mount Resistor RoHS : Not Compliant |
| 31 | ||
| HS300 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 24 | ||
| HS300-TP2 | Ohmite Mfg Co | Silicone Thermal Interface Material Thermal Pads |
| 21 | ||
| HS300 5R F | Ohmite Mfg Co | Chassis Mount Resistor RoHS : Not Compliant |
| 19 | ||
| HS300 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 17 | ||
| HS300 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 16 | ||
| HS300 1K J | Ohmite Mfg Co | Res Wirewound 1K Ohm 5% 60/300W ±25ppm/°C Aluminum Housed AXL Chassis Mount RoHS : Compliant |
| 11 | ||
| HS300 R1 F | Ohmite Mfg Co | Res Wirewound 100mOhm 1% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 8 | ||
| HS300 3R J | Ohmite Mfg Co | Res Wirewound 3Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 7 | ||
![]() Avnet Americas | DW-36-08-H-S-300 | Samtec Inc | - Bulk (Alt: DW-36-08-H-S-300) RoHS : Compliant |
| 0 | |
| ZW-22-11-H-S-300-200 | Samtec Inc | - Bulk (Alt: ZW-22-11-H-S-300-200) RoHS : Compliant |
| 0 | ||
| 44HS30-01-1-09N | Grayhill Inc | - Bulk (Alt: 44HS30-01-1-09N) RoHS : Compliant |
| 0 | ||
| AMHS300 | Omega Engineering | ENCLOSURE HOLE PLUGS FOR FIBERGLASS & STEEL ELECTRICAL ENCLOSURES - Bulk (Alt: AMHS300) RoHS : Not Compliant |
| 0 | ||
| 44HS30-04-5-02N | Grayhill Inc | - Bulk (Alt: 44HS30-04-5-02N) RoHS : Compliant |
| 0 | ||
| MTLW-130-08-H-S-300 | Samtec Inc | Pin Header, Board-to-Board, 1 Rows, 30 Contacts, Through Hole, MTLW Series, Unshrouded, Straight - Bulk (Alt: MTLW-130-08-H-S-300) RoHS : Compliant |
| 0 | ||
| 44HS30-05-4-03N | Grayhill Inc | - Bulk (Alt: 44HS30-05-4-03N) RoHS : Compliant |
| 0 | ||
| 44HS30-02-2-02N | Grayhill Inc | - Bulk (Alt: 44HS30-02-2-02N) RoHS : Compliant |
| 0 | ||
| DW-16-11-H-S-300 | Samtec Inc | - Bulk (Alt: DW-16-11-H-S-300) RoHS : Compliant |
| 0 | ||
| AMHS300-VX | Omega Engineering | ENCLOSURE HOLE PLUGS FOR FIBERGLASS & STEEL ELECTRICAL ENCLOSURES - Bulk (Alt: AMHS300-VX) RoHS : Not Compliant |
| 0 | ||
| LCW-106-08-H-S-300 | Samtec Inc | - Bulk (Alt: LCW-106-08-H-S-300) RoHS : Compliant |
| 0 | ||
| DW-22-11-H-S-300 | Samtec Inc | - Bulk (Alt: DW-22-11-H-S-300) RoHS : Compliant |
| 0 | ||
| 44HS30-01-3-03S | Grayhill Inc | - Bulk (Alt: 44HS30-01-3-03S) RoHS : Compliant |
| 0 | ||
| ZW-15-10-H-S-300-170 | Samtec Inc | - Bulk (Alt: ZW-15-10-H-S-300-170) RoHS : Compliant |
| 0 | ||
| ZW-50-10-H-S-300-170 | Samtec Inc | - Bulk (Alt: ZW-50-10-H-S-300-170) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | HS300 1R J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 1 Ohm 5% RoHS : Compliant |
| 279 | |
| HS300 3R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 3.0 1% RoHS : Compliant |
| 161 | ||
| HS300 15R J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 300W 15 5% RoHS : Compliant |
| 80 | ||
| HS300 2R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 2.0 1% RoHS : Compliant |
| 78 | ||
| HS300 8R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 8.0 1% RoHS : Compliant |
| 61 | ||
| HS300 10R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 300W 10 1% RoHS : Compliant |
| 47 | ||
| HS300 1R2 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 300W 1.2 5% RoHS : Compliant |
| 29 | ||
| HS300 16R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 16 1% RoHS : Compliant |
| 28 | ||
| HS300 1R5 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 1.5 1% RoHS : Compliant |
| 17 | ||
| HS300 5K F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 5K 1% RoHS : Compliant |
| 16 | ||
| HS300 R3 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 0.3 OHM 5% RoHS : Compliant |
| 16 | ||
| HS300 57R6 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 57.6 Ohm 1% RoHS : Compliant |
| 16 | ||
| HS300 47R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 300W 47 1% RoHS : Compliant |
| 10 | ||
| HS300 R15 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 0.15 1% RoHS : Compliant |
| 9 | ||
| HS300 3K3 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 300W 3.3K 1% RoHS : Compliant |
| 2 | ||
![]() Arrow Electronics | HS3001 | Renesas Electronics Corporation | Humidity/Temperature Sensor Digital Serial (I2C) 6-Pin LGA Reel RoHS : Compliant |
| 2,129 | |
| HS3003 | Renesas Electronics Corporation | Humidity/Temperature Sensor Digital Serial (I2C) 6-Pin LGA Reel RoHS : Compliant |
| 498 | ||
| HS300 680R J | Ohmite Mfg Co | Res Wirewound 680Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 32 | ||
| HS300 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 32 | ||
| HS300 220R J | Ohmite Mfg Co | Res Wirewound 220Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 32 | ||
| HS300 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 24 | ||
| HS300 4R7 J | Ohmite Mfg Co | Aluminum Housed Chassis Mount Resistor RoHS : Not Compliant |
| 16 | ||
| HS300 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 16 | ||
| HS300 75R J | Ohmite Mfg Co | Res Wirewound 75Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 16 | ||
| HS300 1R2 J | Ohmite Mfg Co | Res Wirewound 1.2Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 16 | ||
| HS300 200R F | Ohmite Mfg Co | Res Wirewound 200 Ohm 1% 60/300W ±100ppm/°C Aluminum Housed AXL Chassis Mount RoHS : Compliant |
| 13 | ||
| HS300 1K J | Ohmite Mfg Co | Res Wirewound 1K Ohm 5% 60/300W ±25ppm/°C Aluminum Housed AXL Chassis Mount RoHS : Compliant |
| 11 | ||
| HS300 R1 F | Ohmite Mfg Co | Res Wirewound 100mOhm 1% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 8 | ||
| HS300 680R J | Ohmite Mfg Co | Res Wirewound 680Ohm 5% 60W/300W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 6 | ||
| HS300 470R J | Ohmite Mfg Co | Res Wirewound 470 Ohm 5% 60/300W ±100ppm/°C Aluminum Housed AXL Chassis Mount RoHS : Compliant |
| 1 | ||
![]() Newark | HS3003 | Renesas Electronics Corporation | Humidity/Temperature Sensor, Lga-6; |Renesas Electronics Corporation HS3003 RoHS : Compliant |
| 2,270 | |
| CHS3004812H | Cosel USA Inc | Dc-Dc Converter, 12V, 25A; |Cosel CHS3004812H RoHS : Compliant |
| 10 | ||
| HS3001 | Renesas Electronics Corporation | Humidity/Temperature Sensor, Lga-6; |Renesas Electronics Corporation HS3001 RoHS : Compliant |
| 9 | ||
| CHS3002432-B | Cosel USA Inc | Dc-Dc Converter, 32V, 7.9A; |Cosel CHS3002432-B RoHS : Compliant |
| 9 | ||
| CHS3004810 | Cosel USA Inc | Dc-Dc Converter, 10V, 30A; |Cosel CHS3004810 RoHS : Compliant |
| 5 | ||
| CHS3004810-B | Cosel USA Inc | Dc-Dc Converter, 10V, 30A; |Cosel CHS3004810-B RoHS : Compliant |
| 5 | ||
| CHS3004828 | Cosel USA Inc | Dc-Dc Converter, 28V, 10.8A; |Cosel CHS3004828 RoHS : Compliant |
| 4 | ||
| CHS3004832 | Cosel USA Inc | Dc-Dc Converter, 32V, 9.4A; |Cosel CHS3004832 RoHS : Compliant |
| 4 | ||
| CHS3002424 | Cosel USA Inc | Dc-Dc Converter, 24V, 10.5A; |Cosel CHS3002424 RoHS : Compliant |
| 3 | ||
| CHS3002415 | Cosel USA Inc | Dc-Dc Converter, 15V, 13.5A; |Cosel CHS3002415 RoHS : Compliant |
| 3 | ||
| CHS3004828-B | Cosel USA Inc | Dc-Dc Converter, 28V, 10.8A; |Cosel CHS3004828-B RoHS : Compliant |
| 2 | ||
| CHS3004824 | Cosel USA Inc | Dc-Dc Converter, 24V, 12.5A; |Cosel CHS3004824 RoHS : Compliant |
| 1 | ||
| CHS3004815 | Cosel USA Inc | Dc-Dc Converter, 15V, 20A; |Cosel CHS3004815 RoHS : Compliant |
| 1 | ||
| CHS3004815-B | Cosel USA Inc | Dc-Dc Converter, 15V, 20A; |Cosel CHS3004815-B RoHS : Compliant |
| 1 | ||
| 44HS30-02-1-12N | Grayhill Inc | Rotary Sw, Grayhill 44Hs30-02-1-12N; |Grayhill 44HS30-02-1-12N RoHS : Compliant |
| 1 | ||
![]() RS | HS300 220R F | Arcol | 300 WATTS AL HOUSED220 OHMS 1% |
| 42 | |
| VHS30-02B | SMC Corporation of America | VALVE, 0.1 TO 1 MPA OP PRESSURE, 1/4 IN. PORT SIZE, VHS30 SERIES |
| 5 | ||
| CHS3004812 | Cosel USA Inc | DC/DC CONVERTER POWER MODULE TYPE, QUARTER RoHS : Compliant |
| 5 | ||
| RHS300 | Carlo Gavazzi Holding AG | MOUNTING PLATE FOR RZ3 SOLID STATE RELAYS,5.40 C/W, DIN, RHS SERIES RoHS : Unknown |
| 2 | ||
| HS300 8R F | Arcol | RESISTOR, ALUMINUM HOUSING, POWER RATING 300 W, RESISTANCE 8 OHMS |
| 2 | ||
| VHS30-03B-S | SMC Corporation of America | VALVE, 0.1 TO 1 MPA OP PRESSURE, 3/8 IN. PORT SIZE, VHS30 SERIES |
| 2 | ||
| 630763 (PSEN OP4H-S-30-060/1) | Pilz International | TYPE 4 SAFETY LIGHT GUARD, 600 MM HEIGHT, MUTING, BLANKING, 24V SUPPLY |
| 2 | ||
| VHS30-03-D | SMC Corporation of America | PRESSURE RELIEF 3 PORT VALVE, VHS SERIES |
| 1 | ||
| HS300 R33 F | Arcol | 300 WATTS AL HOUSED330 MILLIOHMS 1% |
| 1 | ||
| HS300 6R8 J (136294) | Arcol | HS300 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 6.8OHMS +/-5% 300W |
| 1 | ||
| 630720 (PSEN OP2H-S-30-015/1) | Pilz International | SAFETY LIGHT CURTAIN, TYPE 2, PL C, PROTECTED FIELD HEIGHT 150 MM. |
| 1 | ||
| NHS300 3R9 F | Ohmite Mfg Co | WIREWOUND RESISTORS - CHASSIS MOUNT300 WATTS AL HOUSED 3.9 OHMS 1% |
| 0 | ||
| VHS30-02-KM-D | SMC Corporation of America | VALVE, PRESSURE RELIEF 3 PORT, VHS SERIES |
| 0 | ||
| 44HS30-01-1-12S-F (44HS30-01B12S) | Grayhill Inc | ROTARY SWITCH, 30 DEG, # OF DECKS: 01, POLES/DECK: 1, POSITIONS/POLE: 12, CONTA |
| 0 | ||
| 44HS30-03-1-12N-F (44HS30-03B12N) | Grayhill Inc | ROTARY SWITCH, 30 DEG, # OF DECKS: 03, POLES/DECK: 1, POSITIONS/POLE: 12, CONTA |
| 0 | ||
![]() Rochester Electronics | THS3001CDGN![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant |
| 9,737 | |
THS3001HVIDGN![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant |
| 13,336 | ||
THS3001ID![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant |
| 6,061 | ||
THS3001IDGN![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant |
| 4,691 | ||
THS3001HVIDGNR![]() | Texas Instruments | Operational Amplifier RoHS : Compliant |
| 11,783 | ||
THS3001HVCDGN![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant |
| 9,578 | ||
THS3001IDGNR![]() | Texas Instruments | Op Amp Current Feedback 420MHz 8-SOP T/R RoHS : Compliant |
| 2,268 | ||
![]() Sager | CHS3002405-L2 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 200W 5V 40A 18-36Vin Pin L 5.33mm RoHS : Compliant |
| 0 | |
| 44HS30-06-3-02N | Grayhill Inc | Rotary Switches Rotary Switch, Military 125°C, shaft/panel seal, 30°, 6 deck, 3 pole/deck, 2 positions/pole, non-shorting RoHS : Compliant |
| 0 | ||
| 44HS30-07-1-12N | Grayhill Inc | Rotary Switches Rotary Switch, Military 125°C, shaft/panel seal, 30°, 7 deck, 1 pole/deck, 12 positions/pole, non-shorting RoHS : Compliant | 0 | |||
| CHS3002412-L5 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 200.4W 12V 16.7A 5 pin +S,-S,TRM LESS RoHS : Compliant |
| 0 | ||
| CHS3002412-U | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 200.4W 12V 16.7A Shut down protection RoHS : Compliant |
| 0 | ||
| CHS3002424-L2 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 252W 18-36Vin 24V 10.5A 5.3mm Pin RoHS : Compliant |
| 0 | ||
| 44HS30-01-1-06N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| 44HS30-01-1-12S-C | Grayhill Inc | 44HS30-01-1-12S-C |
| 0 | ||
| 44HS30-02-1-05N | Grayhill Inc | Rotary Switches Rotary Switch, Military 125°C, shaft/panel seal, 30°, 2 deck, 1 pole/deck, 5 positions/pole, non-shorting RoHS : Compliant |
| 0 | ||
| 44HS30-03-1-04N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp |
| 0 | ||
| DW-36-08-H-S-300 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| QHS30-018-0C | Murata Power Solutions | Isolated DC/DC Converters - Other | 0 | |||
| ZW-22-11-H-S-300-200 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| CHS3004812-L2 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 300W 12V25A 36-76Vin Pin L 5.33mm RoHS : Compliant |
| 0 | ||
| CHS3004812H-L2 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 300W 12V25A 95.5%eff Pin L 5.33mm RoHS : Compliant |
| 0 | ||
![]() Coilcraft Direct | 0805HS-300TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | |
![]() TME | HS300 47R F | Arcol | Resistor: wire-wound; 47Ω; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 30 | |
| HS300 330R F | Arcol | Resistor: wire-wound; 330Ω; screw; 300W; ±1%; 2.5kV; 100ppm/°C |
| 24 | ||
| HS300 5R F | Arcol | Resistor: wire-wound; 5Ω; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 19 | ||
| HS300 30R J | Arcol | Resistor: wire-wound; 30Ω; with heatsink; screw; 300W; ±5%; 2.5kV |
| 15 | ||
| HS300 10R F | Arcol | Resistor: wire-wound; 10Ω; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 13 | ||
| HS300 3R3 F | Arcol | Resistor: wire-wound; 3.3Ω; screw; 300W; ±1%; 2.5kV; 100ppm/°C |
| 11 | ||
| HS300 16R F | Arcol | Resistor: wire-wound; 16Ω; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 8 | ||
| 1682HS/300 | Beta Electric | Ruler; for working at height; L: 300mm; W: 13mm; measure |
| 0 | ||
| HS300 0R33 F | Arcol | Resistor: wire-wound; 330mΩ; screw; 300W; ±1%; 2.5kV; 100ppm/°C |
| 0 | ||
| HS300 1R5 F | Arcol | Resistor: wire-wound; 1.5Ω; screw; 300W; ±1%; 2.5kV; 100ppm/°C |
| 0 | ||
| HS300 2K F | Arcol | Resistor: wire-wound; 2kΩ; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 0 | ||
| RHS30040D | Carlo Gavazzi Holding AG | Heatsink: extruded; L: 200mm; W: 300mm; H: 40mm; 0.4K/W; aluminium |
| 0 | ||
| HS300 20R F | Arcol | Resistor: wire-wound; 20Ω; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 0 | ||
| HS300 2R2 J | Arcol | Resistor: wire-wound; 2.2Ω; with heatsink; screw; 300W; ±5%; 2.5kV |
| 0 | ||
| HS300 30R F | Arcol | Resistor: wire-wound; 30Ω; screw; 300W; ±1%; 2.5kV; 128x72.5x41.8mm |
| 0 | ||
![]() Ameya Holding Limited | THS3001CDR![]() | Texas Instruments | IC OPAMP CFA 1.75GHZ 8SOIC RoHS : Compliant | 2,200 | ||
![]() ComSIT USA | THS3001CD![]() | Texas Instruments | 420 MHZ HIGH-SPEED CURRENT-FEEDBACK AMPLIFIER Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Not Compliant | 75 | ||
![]() NexGen Digital | FPEFE7T6-S80BH-S3000 | FADU Technology | 128 | |||
![]() Richardson RFPD | NHS300 3R9 F | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Not Compliant |
| 0 | |
| HS3007R5F | Ohmite Mfg Co | Res Wirewound 7.5 Ohm 1% 60/300W ±100ppm/C Aluminu RoHS : Compliant |
| 0 | ||
| HS300 2R2 J | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS300 57R6 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS300 6R8 J | Ohmite Mfg Co | Aluminium Housed Resistors |
| 0 | ||
| HS300 15R J | Ohmite Mfg Co | Res Wirewound 15 Ohm 5% 60/300W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS300 1K F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS300 1K2 J | Ohmite Mfg Co | Res Wirewound 1.2K Ohm 5% 60/300W ±25ppm/C Aluminu RoHS : Compliant |
| 0 | ||
| HS300 44R2 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS300 10R F | Ohmite Mfg Co | Res Wirewound 10 Ohm 1% 60/300W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS300 2K F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS300 47R F | Ohmite Mfg Co | Res Wirewound 47 Ohm 1% 60/300W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS300 5R F | Ohmite Mfg Co | Chassis Mount Resistor RoHS : Compliant |
| 0 | ||
| HS300 R56 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS3002KJ | Ohmite Mfg Co | Res Wirewound 2K Ohm 5% 60/300W ±25ppm/C Aluminum RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | THS3001IDR | INSTOCK | 870 | |||
![]() Avnet Abacus | SSR10HS-30013 | KEMET Corporation | Choke Common Mode 13 mH 3 A (Alt: SSR10HS-30013) RoHS : Compliant | 0 | ||
| SSHB10HS-30006 | KEMET Corporation | Choke Common Mode 600 uH 3 A (Alt: SSHB10HS-30006) RoHS : Compliant | 0 | |||
| SSHB21HS-30013 | KEMET Corporation | Choke Common Mode 13 mH 3 A (Alt: SSHB21HS-30013) RoHS : Compliant | 0 | |||
| 44HS30-01-1-09N | Grayhill Inc | (Alt: 44HS30-01-1-09N) RoHS : Compliant | 0 | |||
| 44HS30-03-6-02N | Grayhill Inc | Switch Rotary 6PDT 2 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: M3786/4-5066) RoHS : Compliant | 0 | |||
| 44HS30-01-4-03N | Grayhill Inc | Switch Rotary 4P3T 3 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-01-4-03N) RoHS : Compliant | 0 | |||
| 44HS30-01-2-04S | Grayhill Inc | Switch Rotary DP4T 4 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-01-2-04S) RoHS : Compliant | 0 | |||
| SSRH24NHS-30092 | KEMET Corporation | Choke Common Mode 92 mH 3 A (Alt: SSRH24NHS-30092) RoHS : Compliant | 0 | |||
| 44HS30-05-4-03N | Grayhill Inc | (Alt: 44HS30-05-4-03N) RoHS : Compliant | 0 | |||
| 44HS30-06-4-03N | Grayhill Inc | Switch Rotary 4P3T 3 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-06-4-03N) RoHS : Compliant | 0 | |||
| 44HS30-01-1-05N | Grayhill Inc | Switch Rotary SP5T 5 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: M3786/4-5004) RoHS : Compliant | 0 | |||
| 44HS30-04-1-12N | Grayhill Inc | Switch Rotary SP12T 12 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-04-1-12N) RoHS : Compliant | 0 | |||
| 44HS30-01-3-04N | Grayhill Inc | Switch Rotary 3P4T 4 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-01-3-04N) RoHS : Compliant | 0 | |||
| 44HS30-01-2-04N | Grayhill Inc | Switch Rotary DP4T 4 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-01-2-04N) RoHS : Compliant | 0 | |||
| 44HS30-04-1-09N | Grayhill Inc | Switch Rotary SP9T 9 Flatted Shaft Solder Lug 1A 115VAC 115VDC (Alt: 44HS30-04-1-09N) RoHS : Compliant | 0 | |||
![]() Avnet Silica | US082-HS3001EVZ | Renesas Electronics Corporation | (Alt: US082-HS3001EVZ) RoHS : Compliant | 0 | ||
| SCTHS300N75G3AG | STMicroelectronics | Silicon Carbide MOSFET Single N Channel 300 A 750 V 88 Milliohms STPAK 4 Pins (Alt: SCTHS300N75G3AG) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | HS3001 | Telit | Telit/Novatel 1xRTT module |
| 1 | |
![]() Component Electronics, Inc | HS300-26A | Micrometals Inc | IN STOCK SHIP TODAY | 600 | ||
THS3001CD![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 13 | ||
![]() Master Electronics | HS300-7R5-F | Ohmite Mfg Co | RoHS : Compliant |
| 16 | |
| 44HS30-03-1-04N | Grayhill Inc | Switch Rotary SP4T 4 Flatted Shaft Solder Lug 1A 115VAC 115VDC RoHS : Compliant |
| 7 | ||
| MTSW-108-09-H-S-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| NHS300-11R-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| RHS300 | Carlo Gavazzi Holding AG | H/S SSR 3-PH X1 DIN 105X82X20M RoHS : Compliant |
| 0 | ||
| NHS300-6R-F | Ohmite Mfg Co | 300 WATTS AL HOUSED 6 OHMS RoHS : Compliant |
| 0 | ||
| 44HS30-01-1-06N | Grayhill Inc | Switch Rotary SP6T 6 Flatted Shaft Solder Lug 1A 115VAC 115VDC RoHS : Compliant |
| 0 | ||
| NHS300-100R-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| NHS300-50R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| DW-36-08-H-S-300 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| ZW-22-11-H-S-300-200 | Samtec Inc | Headers & Wire Housings Flexible Board Stacking Header 0.100 Pitch RoHS : Compliant |
| 0 | ||
| CHS300B | Thomas & Betts | Heat Shrink Tubing - 3 Inch - Clear - Rated 500 Volt - 125 Degree C - Reel of 50 Foot. RoHS : Compliant |
| 0 | ||
| 44HS30-02-1-08N | Grayhill Inc | Switch Rotary SP8T 8 Flatted Shaft Solder Lug 1A 115VAC 115VDC RoHS : Compliant |
| 0 | ||
| HS300-8R2-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| DW-28-09-H-S-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W09712/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to N Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax With Times Microwave Parts with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave parts with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave parts with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W09712/HS-300 can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W09712/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09712/HS-300 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave parts with heatshrink. |
| 1,314 | |
| PE3C1490/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1490/HS-300 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1490/HS-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1490/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1490/HS-300 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,314 | ||
| PE3C0863/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to SMA Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male right angle to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle type N to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C0863/HS-300 can also be known as a low loss right angle type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C0863/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0863/HS-300 can also be used in the other direction and will be right angle SMA male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink. |
| 1,015 | ||
| PE3W03064LF/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W03064LF/HS-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03064LF/HS-300 RF cable has a TPE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W03064LF/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 858 | ||
| PE3C8401/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to Reverse Polarity SMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male right angle to reverse polarity SMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to reverse polarity SMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and reverse polarity SMA cable connection on the other. Our low loss right angle type N to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to reverse polarity SMA cable is a male to male coax assembly, PE3C8401/HS-300, can also be known as a low loss right angle N type plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity SMA plug cable assembly PE3C8401/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8401/HS-300 can also be used in the other direction and will be reverse polarity SMA male to right angle N type male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to reverse polarity SMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink. |
| 575 | ||
| PE3W13851/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W13851/HS-300 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13851/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle SMA male cable has a maximum VSWR of 1.35:1. TNC plug to SMA plug cable assembly PE3W13851/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13851/HS-300 can also be used in the other direction and will be a right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 545 | ||
| PE3W04546LF/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a BNC cable connection on the other. Our low loss SMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04546LF/HS-300 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04546LF/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to BNC male cable has a maximum VSWR of 1.4:1. SMA plug to BNC plug cable assembly PE3W04546LF/HS-300 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04546LF/HS-300 can also be used in the other direction and will be a BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 431 | ||
| PE3W09436/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male Right Angle to N Female Low Loss Cable 300 Inch Length Using LMR-400-UF Coax With Times Microwave Parts with HeatShrink., Radio frequency assembly TNC male right angle to N female low loss cable 300 inch length using LMR-400-UF coax with Times Microwave parts with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N female low loss cable 300 inch length using LMR-400-UF coax with Times Microwave parts with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and type N cable connection on the other. Our low loss right angle TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3W09436/HS-300, can also be known as a low loss right angle TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3W09436/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09436/HS-300 can also be used in the other direction and will be type N female to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N female low loss cable 300 inch length using LMR-400-UF coax with Times Microwave parts with heatshrink. |
| 17 | ||
| PE3W04805LF/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male right angle to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04805LF/HS-300 can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04805LF/HS-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W04805LF/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04805LF/HS-300 can also be used in the other direction and will be a right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 17 | ||
| PE3W18558/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to QD QMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to QD QMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to QD QMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a QMA cable connection on the other. Our low loss type N to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18558/HS-300 can also be known as a low loss type N plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18558/HS-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to QMA male cable has a maximum VSWR of 1.4:1. Type N plug to QMA plug cable assembly PE3W18558/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to QMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18558/HS-300 can also be used in the other direction and will be a QMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of type N and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to QMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06698/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. Reverse Polarity TNC Male to Reverse Polarity TNC Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly reverse polarity TNC male to reverse polarity TNC male low loss cable 300 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity TNC male to reverse polarity TNC male low loss cable 300 inch length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity TNC cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss reverse polarity TNC to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W06698/HS-300 can also be known as a low loss reverse polarity TNC plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to reverse polarity TNC plug cable assembly PE3W06698/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency reverse polarity TNC male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC reverse polarity plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to reverse polarity TNC male low loss cable 300 inch length using LMR-400-UF coax with heatshrink. |
| 0 | ||
| PE3C0057/HS-300CM | Pasternack Enterprises |
| 0 | |||
| PE3W13976/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMB Jack Bulkhead to TNC Male Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to TNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to TNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss SMB to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W13976/HS-300 can also be known as a low loss SMB female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13976/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. SMB female to TNC plug cable assembly PE3W13976/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13976/HS-300 can also be used in the other direction and will be a TNC male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to TNC cable assembly for quick shipment worldwide. Variations of SMB and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2486LF/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2486LF/HS-300 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2486LF/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder. |
| 0 | ||
| PE3W04607/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to Reverse Polarity TNC Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly N male to reverse polarity TNC male low loss cable 300 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity TNC male low loss cable 300 inch length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a reverse polarity TNC cable connection on the other. Our low loss type N to reverse polarity TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04607/HS-300 can also be known as a low loss type N plug to reverse polarity TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04607/HS-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to reverse polarity TNC plug cable assembly PE3W04607/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04607/HS-300 can also be used in the other direction and will be a reverse polarity TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC reverse polarity plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Vyrian | SSHB10HS-30006 | KEMET Corporation | Single Phase EMI Filter, 250V | 13,575 | ||
THS3001HVCDG4![]() | Texas Instruments | Video Amplifier RoHS : Compliant | 9,827 | |||
THS3001HVCD![]() | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, PDSO8 | 9,530 | |||
THS3001CDR![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 8,422 | |||
THS3001CDG4![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 8,012 | |||
THS3001CDGNR![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 7,433 | |||
THS3001CDRG4![]() | Texas Instruments | Operational Amplifier, 1 Func, 4000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 7,150 | |||
THS3001HVCDGNR![]() | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, PDSO8 RoHS : Compliant | 7,044 | |||
THS3001HVCDGNRG4![]() | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, PDSO8 RoHS : Compliant | 6,945 | |||
THS3001CDGNG4![]() | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, PDSO8 RoHS : Compliant | 6,629 | |||
| THS3001EVM | Texas Instruments | Development kits/Accessories RoHS : Compliant | 6,239 | |||
THS3001CDGNRG4![]() | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, PDSO8 RoHS : Compliant | 5,801 | |||
| SCTHS300N75G3AG | STMicroelectronics | Power Field-Effect Transistor RoHS : Compliant | 5,209 | |||
THS3001HVCDGNG4![]() | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, PDSO8 RoHS : Compliant | 4,515 | |||
THS3001CD![]() | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 3,795 | |||
![]() Win Source Electronics | AHS300-2 | Littelfuse Inc | POLYSWITCH PTC RESET 3.0A SMD RoHS : Compliant |
| 15,000 | |
THS3001ID![]() | Texas Instruments | IC OPAMP CFA 1.75GHZ 8SOIC RoHS : Compliant |
| 3,174 | ||
THS3001IDRG4![]() | Texas Instruments | 420-MHz HIGH-SPEED CURRENT-FEEDBACK AMPLIFIER RoHS : Compliant |
| 2,940 | ||
THS3001IDR![]() | Texas Instruments | IC OPAMP CFA 1.75GHZ 8SOIC RoHS : Compliant |
| 2,880 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |