| Electronic Components Datasheet Search |
|
HS100 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 1,165 | |
| HS100 2R F | Ohmite Mfg Co | Res Wirewound 2Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Not Compliant |
| 330 | ||
| HS100 1K J | Ohmite Mfg Co | Res Wirewound 1KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 305 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 175 | ||
| HS100 1K J | Ohmite Mfg Co | Res Wirewound 1KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 141 | ||
| HS100 2R F | Ohmite Mfg Co | Res Wirewound 2Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Not Compliant |
| 115 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 108 | ||
| HS100 2R F | Ohmite Mfg Co | Res Wirewound 2Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Not Compliant |
| 65 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 1K J | Ohmite Mfg Co | Res Wirewound 1KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 2R F | Ohmite Mfg Co | Res Wirewound 2Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Not Compliant |
| 45 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 34 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 32 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 28 | ||
![]() Avnet Americas | HDTF-3-06-S-RA-HS-100 | Samtec Inc | Connector High Density Backplane Receptacle 36 Position 1.8mm Press Fit Right Angle Through Hole - Trays (Alt: HDTF-3-06-S-RA-HS-100) RoHS : Compliant |
| 0 | |
| HDTF-6-08-S-RA-HS-100 | Samtec Inc | Connector High Density Backplane Receptacle 96 Position 1.8mm Press Fit Right Angle Through Hole - Bulk (Alt: HDTF-6-08-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| HS100745 | TE Connectivity | P061PT100A_ 3.0X_50 ___X 4B24P - Bag (Alt: HS100745) RoHS : Compliant |
| 0 | ||
| HDTF-4-04-S-RA-HS-100 | Samtec Inc | Connector High Density Backplane Receptacle 32 Position 1.8mm Press Fit Right Angle Through Hole - Trays (Alt: HDTF-4-04-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| AMHS100-GY | Omega Engineering | ENCLOSURE HOLE PLUGS FOR FIBERGLASS & STEEL ELECTRICAL ENCLOSURES - Bulk (Alt: AMHS100-GY) RoHS : Not Compliant |
| 0 | ||
| HDTF-4-06-S-RA-HS-100 | Samtec Inc | Connector High Density Backplane Receptacle 48 Position 1.8mm Press Fit Right Angle Through Hole - Trays (Alt: HDTF-4-06-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| SSHB10HS-10051 | KEMET Corporation | Choke, Common Mode, 5.1 mH, 1 A - Trays (Alt: SSHB10HS-10051) RoHS : Compliant |
| 0 | ||
| AMHS100 | Omega Engineering | ENCLOSURE HOLE PLUGS FOR FIBERGLASS & STEEL ELECTRICAL ENCLOSURES - Bulk (Alt: AMHS100) RoHS : Not Compliant |
| 0 | ||
| AISC-1210HS-100K-T2 | Abracon Corporation | Wirewound Inductor, 10 uH, 1.5 Ohm, ? 10%, 36 MHz, 430 mA, 1210 [3225 Metric] - Tape and Reel (Alt: AISC-1210HS-100K-T2) RoHS : Compliant |
| 0 | ||
| HS100760 | TE Connectivity | P061PT500A_ 5.0X_22 ___X 2N26P - Bulk (Alt: HS100760) RoHS : Not Compliant |
| 0 | ||
| HS100542 | TE Connectivity | SPV1PT100A_ 4.5X_23 7.0X137 2N - Bulk (Alt: HS100542) RoHS : Not Compliant |
| 0 | ||
| ASPI-8040HS-100M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-8040HS-100M-T) RoHS : Compliant |
| 0 | ||
| LPHS-10-00-L-VP1 | Samtec Inc | - Trays (Alt: LPHS-10-00-L-VP1) RoHS : Compliant |
| 0 | ||
| HDTF-6-06-S-RA-HS-100 | Samtec Inc | Connector High Density Backplane Receptacle 72 Position 1.8mm Press Fit Right Angle Through Hole - Trays (Alt: HDTF-6-06-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| HDTF-4-08-S-RA-HS-100 | Samtec Inc | Connector High Density Backplane Receptacle 64 Position 1.8mm Press Fit Right Angle Through Hole - Trays (Alt: HDTF-4-08-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 175 | |
| HS100 1K5 J | Ohmite Mfg Co | Res Wirewound 1.5KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 145 | ||
| HS100 9R1 F | Ohmite Mfg Co | Res Wirewound 9.1Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant | 90 | |||
| HS100 25R F | Ohmite Mfg Co | Res Wirewound 25Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant | 90 | |||
| HS100 9R1 F | Ohmite Mfg Co | Res Wirewound 9.1Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 70 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 100R J | Ohmite Mfg Co | Res Wirewound 100Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 2R2 J | Ohmite Mfg Co | Res Wirewound 2.2Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 2R2 J | Ohmite Mfg Co | Res Wirewound 2.2Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 1K5 J | Ohmite Mfg Co | Res Wirewound 1.5KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 35 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 28 | ||
| HS100 25R F | Ohmite Mfg Co | Res Wirewound 25Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 21 | ||
| HS100 100R J | Ohmite Mfg Co | Res Wirewound 100Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 9 | ||
![]() Newark | KPHHS-1005SURCK | Kingbright | Smd-Led 0402 Red; |Kingbright KPHHS-1005SURCK RoHS : Compliant |
| 70,000 | |
| BKP0603HS100-T | TAIYO YUDEN | Ferrite Bead, 0201, 10Ohm, 1.3A; Available Until Stocks Are Exhausted |Taiyo Yuden BKP0603HS100-T RoHS : Compliant |
| 12,330 | ||
| BKP0603HS100-T | TAIYO YUDEN | Ferrite Bead, 0201, 10Ohm, 1.3A; Available Until Stocks Are Exhausted |Taiyo Yuden BKP0603HS100-T RoHS : Compliant |
| 12,330 | ||
| KPHHS-1005QBC-D-V | Kingbright | Led, 0402, Blue; |Kingbright KPHHS-1005QBC-D-V RoHS : Compliant |
| 3,248 | ||
| KPHHS-1005SECK | Kingbright | Smd-Led 0402 Orange; |Kingbright KPHHS-1005SECK RoHS : Compliant |
| 2,379 | ||
| KPHHS-1005LVZGCK | Kingbright | Led, Green, 40Mcd, 525Nm, Smd; |Kingbright KPHHS-1005LVZGCK RoHS : Compliant |
| 1,423 | ||
| KPHHS-1005LVZGCK | Kingbright | Led, Green, 40Mcd, 525Nm, Smd; |Kingbright KPHHS-1005LVZGCK RoHS : Compliant |
| 1,423 | ||
| KPHHS-1005LVSECK-J3-PF | Kingbright | Led, Red, 35Mcd, 625Nm, Smd; |Kingbright KPHHS-1005LVSECK-J3-PF RoHS : Compliant |
| 1,350 | ||
| KPHHS-1005LVSECK-J3-PF | Kingbright | Led, Red, 35Mcd, 625Nm, Smd; |Kingbright KPHHS-1005LVSECK-J3-PF RoHS : Compliant |
| 1,350 | ||
| KPHHS-1005ZGC-V | Kingbright | Led, 0402, True Green; |Kingbright KPHHS-1005ZGC-V RoHS : Compliant |
| 425 | ||
| HS100 2R F | Arcol | Res, 2R, 100W, Solder, Wirewound; Resistance:2Ohm; Product Range:Hs Series; Power Rating:100W; Resistance Tolerance:± 1%; Voltage Rating:1.9Kv; Resistor Technology:Wirewound; Temperature Coefficient:± 100Ppm/°C; Product Length:65.2Mmrohs Compliant: Yes RoHS : Compliant |
| 48 | ||
| RHS100 | Carlo Gavazzi Holding AG | Relay Heat Sink; Product Range:Rhs Series; Thermal Resistance:3°C/W; Heat Sink Mounting:Din Rail; External Length:75Mm; External Height:82Mm; External Width:45Mm; Accessory Type:Heat Sink; Body Material:Plastic; Depth:49Mm Rohs Compliant: Yes RoHS : Compliant |
| 19 | ||
| HS100F R5 J 200MM M372. | Ohmite Mfg Co | Res, 0R5, 100W, Wire, Wirewound; |Ohmite HS100F R5 J 200MM M372. RoHS : Compliant |
| 16 | ||
| HS100 | Twin Industries | Heat-Shrink Tubing, 2:1, Po, 20Pc, 10Mm; Kit Contents:20 Pieces Of 10Mm Dia Polyolefin Heat Shrink Tubing, 5 Each Of 4 Colors; Product Range:- Rohs Compliant: Yes |Twin Industries HS100 RoHS : Compliant |
| 12 | ||
| HS100 11K F | Arcol | Resistor, Wirewound, 11K, 1%, Solder Lug; |Arcol HS100 11K F RoHS : Compliant |
| 3 | ||
![]() RS | HS100 100R J (188188) | Arcol | HS100 WIREWOUND RESISTOR, 100R 100W |
| 600 | |
| HS100 1R J | Ohmite Mfg Co | RESISTOR, WIREWOUND,1 OHMS,100 W,5%,LUG, TCR 100 PPM/DEGC, ALUMINUM HOUSED |
| 45 | ||
| HS100 50R J | Ohmite Mfg Co | RESISTOR, WIREWOUND,50 OHMS,100 W,5%,LUG, TCR 100 PPM/DEGC, ALUMINUM HOUSED |
| 44 | ||
| HS100 6R8 J | Arcol | HS100 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 6.8OHMS +/-5% 100W |
| 42 | ||
| HS 100 SC | Steel City | STEEL ONE HOLE STRAP, 3/8", ZINC PLATED, FOR USE WITH RIGID/IMC CONDUIT |
| 41 | ||
| HS100 1R5 J (2522906) | Arcol | HS100 WIREWOUND RESISTOR,1R5 100W |
| 40 | ||
| HS100 2R F | Arcol | RESISTOR, ALUMINUM HOUSING, POWER RATING 100 W, RESISTANCE 2 OHMS |
| 39 | ||
| HS100 10K F | Ohmite Mfg Co | RESISTOR, WIREWOUND,10 KILOHMS,100 W,1%,LUG, TCR 25 PPM/DEGC, ALUMINUM HOUSED |
| 31 | ||
| HS100 47R F | Arcol | RESISTOR, ALUMINUM HOUSING, POWER RATING 100 W, RESISTANCE 47 OHMS |
| 28 | ||
| HS1003BPK25 | Hubbell Wiring Device-Kellems | CONNECTOR, CORD, MINIATURE SNAP-IN, BLK NYLON, 2.18" L, 0.37" ID, 25/PACK QTY |
| 24 | ||
| HS100 1K5 J (2522940P) | Arcol | HS100 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 1.5KOHMS +/-5% 100W |
| 14 | ||
| HS100 330R J | Arcol | HS100 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 330OHMS +/-5% 100W |
| 7 | ||
| HS100 2R2 J (188093) | Arcol | HS100 WIREWOUND RESISTOR,2R2 100W |
| 7 | ||
| HS100 2R7 J (1074248) | Arcol | HS100 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 2.7OHMS +/-5% 100W |
| 6 | ||
| ECHS100 | Siemens | CABLE CONDUIT FITTING, 25.4MM NOMINAL SIZE |
| 1 | ||
![]() Bisco Industries | HS1.00FEP1.6 INCHES | Misc Wire Cable Tubing Sleeve | 1,008 | |||
| FHS100530 | SOCKET SCREWS | 102 | ||||
| FHS100412 | SOCKET SCREWS | 100 | ||||
| FHS100616 | SOCKET SCREWS | 99 | ||||
| FHS100820 | SOCKET SCREWS | 76 | ||||
| FHS100630 | SOCKET SCREWS | 57 | ||||
| FHS100622-050P1 | SOCKET SCREWS | 50 | ||||
| FHS100312 | MISC. INDUSTRIAL HRD | 41 | ||||
| ACM36DRMH-S1002 | Sullins Connector Solutions | 20 | ||||
| RHS100 | MISC. RELAYS | 10 | ||||
![]() Onlinecomponents.com | HS100-R1-J | Ohmite Mfg Co | RoHS : Compliant |
| 115 | |
| HS100-1R5-J | Ohmite Mfg Co | RoHS : Compliant |
| 55 | ||
| HS100-R47-J | Ohmite Mfg Co | RoHS : Compliant |
| 32 | ||
| HS100-TP2 | Ohmite Mfg Co | HS100 RESISTOR THERMAL PAD RoHS : Compliant |
| 0 | ||
| HS100-SS | Thomas & Betts | 3/8 RIGID ONE HOLE STAINLE RoHS : Compliant |
| 0 | ||
| HS100-8R-J | Ohmite Mfg Co | 100 WATTS AL HOUSED 8 OHMS RoHS : Compliant |
| 0 | ||
| HS100-5R6-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-R51-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-680R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-2K2-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-100R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-60R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-3K-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-120R-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-1K3-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | THS1009IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 21,387 | |
THS10082IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 29,545 | ||
THS1007IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 10,538 | ||
THS1007CDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 23,000 | ||
THS10064IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 31,435 | ||
THS10082CDA![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant |
| 12,650 | ||
THS10064CDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 15,914 | ||
![]() Sager | HDTF-3-06-S-RA-HS-100 | Samtec Inc | High Speed / Modular Connectors XCede HD 1.80 mm High-Density Backplane Right-Angle Receptacle RoHS : Compliant |
| 0 | |
| HS1004GPK25 | Hubbell Incorporated | JR CORD CONN, SNAPIN, .32-.43, GY, 25PK |
| 0 | ||
| SNDHS100B05 | Cosel USA Inc | Isolated DC/DC Converters - SMD 100W 5V 20A VALUE ADDED RoHS : Compliant |
| 0 | ||
| APHHS1005SURCK | Kingbright | Standard LEDs - SMD RED WTR CLEAR 150mcd 650nm RoHS : Compliant |
| 0 | ||
| HDTF-6-08-S-RA-HS-100 | Samtec Inc | High Speed / Modular Connectors XCede HD 1.80 mm High-Density Backplane Right-Angle Receptacle RoHS : Compliant |
| 0 | ||
| SNDHS100B15 | Cosel USA Inc | Isolated DC/DC Converters - SMD 100W 15V 6.7A VALUE ADDED RoHS : Compliant |
| 0 | ||
| DHS100B28 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 28V 3.6A Through Hole RoHS : Compliant |
| 0 | ||
| HS1004BPK25 | Hubbell Incorporated | CORD CONN JR, SNAPIN, .32-.43, BK, 25PK |
| 0 | ||
| SNDHS100B28 | Cosel USA Inc | Isolated DC/DC Converters - SMD 100W 28V 3.6A VALUE ADDED RoHS : Compliant |
| 0 | ||
| DHS100A05-T | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 5V 20A Through Hole RoHS : Compliant |
| 0 | ||
| DHS100B03 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 3.3V 20A Through Hole RoHS : Compliant |
| 0 | ||
| CHS100B | ABB Group | Heat Shrink Tubing & Sleeves | 0 | |||
| DHS100A05 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 5V 20A Through Hole RoHS : Compliant |
| 0 | ||
| DHS100A15-T | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 15V 6.7A Through Hole RoHS : Compliant |
| 0 | ||
| DHS100B15-T | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 15V 6.7A Through Hole RoHS : Compliant |
| 0 | ||
![]() TME | KPHHS-1005SURCK | Kingbright | LED; red; SMD; 0402; 120÷220mcd; 1.95÷2.5VDC; 1x0.5x0.5mm; 120° RoHS : Compliant |
| 30,817 | |
| KPHHS-1005QBC-D-V | Kingbright | LED; blue; SMD; 0402; 40÷60mcd; 3.3÷4VDC; 1x0.5x0.5mm; 140°; 20mA |
| 2,389 | ||
| KPHHS-1005SYCK | Kingbright | LED; yellow; SMD; 0402; 80÷150mcd; 2÷2.5VDC; 1x0.5x0.5mm; 120°; 20mA RoHS : Compliant |
| 1,408 | ||
| HS100M 220R J M407 | The Heico Companies LLC | Resistor: wire-wound; 220Ω; screw; 100W; ±5%; 1.9kV; 100ppm/°C |
| 160 | ||
| HS100 2R F | Arcol | Resistor: wire-wound; 2Ω; screw; 100W; ±1%; 1.9kV; 65.2x47.5x24.1mm |
| 115 | ||
| HS10 0R1 J | Arcol | Resistor: wire-wound; 100mΩ; with heatsink; screw; 10W; ±5%; 160V |
| 95 | ||
| HS10 0R47 J | Arcol | Resistor: wire-wound; 470mΩ; with heatsink; screw; 100W; ±5%; 1.9kV |
| 76 | ||
| HS100 47R F | The Heico Companies LLC | Resistor: wire-wound; 47Ω; 100W; ±1%; -55÷200°C; 100ppm/°C; 0.065mm |
| 56 | ||
| HS100F 100R F 200MM M372 | The Heico Companies LLC | Resistor: wire-wound; 100Ω; 100W; ±1%; 65.2x27.5x24.1mm; 100ppm/°C |
| 50 | ||
| HS100 10R F | Arcol | Resistor: wire-wound; 10Ω; screw; 100W; ±1%; 1.9kV; 100ppm/°C |
| 45 | ||
| HS100 20R J | Arcol | Resistor: wire-wound; 20Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 45 | ||
| HS100 3R3 J | The Heico Companies LLC | Resistor: wire-wound; 3.3Ω; THT; 100W; ±5%; 1.9kV; 65.2x27.3mm |
| 45 | ||
| RHS100 | Carlo Gavazzi Holding AG | Heatsink: extruded; L: 45mm; W: 85mm; H: 49mm |
| 27 | ||
| RHS10025D | Carlo Gavazzi Holding AG | Heatsink: extruded; L: 100mm; W: 100mm; H: 25mm; 1.85K/W; aluminium |
| 1 | ||
| RHS10067LD | Carlo Gavazzi Holding AG | Heatsink: extruded; L: 67mm; W: 121mm; H: 140mm; 0.88K/W; aluminium |
| 1 | ||
![]() ComSIT USA | APHHS1005SURCK | Kingbright | AVAILABLE EU RoHS : Compliant | 12,893 | ||
![]() ComSIT USA | KPHHS1005SYCK | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Super Bright Yellow, Water Clear, 0.8mm RoHS : Compliant | 12,000 | ||
| KPHHS1005SECK | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Super Bright Orange, Water Clear, 0.8mm RoHS : Compliant | 10,000 | |||
| KPHHS1005MGCKBING5 | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Mega Green, Water Clear, 0.8mm RoHS : Compliant | 4,000 | |||
| KPHHS1005SURCK | Kingbright | 1.0 MM X 0.5 MM X 0.5 MM (0402) HIGH CURRENT AND SURFACE MOUNT LED LAMP Single Color LED, Hyper Red, Water Clear, 0.8mm RoHS : Compliant | 2,000 | |||
| APHHS1005SURC | Kingbright | 1.0 x 0.5 mm SMD Chip LED Lamp Single Color LED, Hyper Red, Water Clear, 0.8mm RoHS : Compliant | 2,000 | |||
| KPHHS1005MGCKBING6 | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Mega Green, Water Clear, 0.8mm RoHS : Compliant | 2,000 | |||
| KPHHS1005SURWK | Kingbright | Red 7-segment display, 100mA, 2.0V, common cathode, 0.56" height, 4-digit, through-hole package. RoHS : Compliant | 2,000 | |||
| KPHHS1005LVSECKJ4PFW | Kingbright | Electronic Component RoHS : Compliant | 1,425 | |||
| KPHHS1005QBCDVBINH3A | Kingbright | Blue Chip LED 1x0.5mm RoHS : Compliant | 1,165 | |||
THS1007IDA![]() | Texas Instruments | 10-BIT, 4 ANALOG INPUT, 6-MSPS, SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTER ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 41 | |||
![]() Interstate Connecting Components | RHS100 | Carlo Gavazzi Holding AG | SSR 1PH DIN RAIL HEAT SINK |
| 4 | |
| 4470HS1009ZR17 | Glenair Inc | 0 | ||||
| 380HS100XW2336-434 | Glenair Inc | Glenair Item | 0 | |||
| 4470HS1009ZL19 | Glenair Inc | 0 | ||||
| 4470HS1009ZL23 | Glenair Inc | 38999 STR B/S SZ 23 | 0 | |||
| HS100745 | TE Connectivity | P061PT100A 3.0X 50 X 4B24P |
| 0 | ||
| 380HS100XW1108-434 | Glenair Inc | Glenair | 0 | |||
| 347HS100XM15-2H12-108 | Glenair Inc | 0 | ||||
| 4470HS1009ZL25 | Glenair Inc | 0 | ||||
| 4470HS1009ZL13 | Glenair Inc | 0 | ||||
| HS100760 | TE Connectivity | P061PT500A_ 5.0X_22 ___X 2N26P | 0 | |||
| HS100542 | TE Connectivity | SPV1PT100A_ 4.5X_23 7.0X137 2N | 0 | |||
| 4470HS1009ZL17 | Glenair Inc | 38999 BACKSHELL SZ 17 | 0 | |||
| HS100580 | TE Connectivity | P082PT100B_ 3.2X_10 6.0X_50 6B | 0 | |||
| 317HS100-11BT | Glenair Inc | 0 | ||||
![]() Powell Electronics | 347HS100XM17-8N | Glenair Inc | COMPOSITE - SHORTING CAP ADAPTER |
| 5 | |
![]() Richardson RFPD | HS100 270R F | Ohmite Mfg Co | HS100 270R F RoHS : Compliant |
| 0 | |
| HS100 27R F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS100 3K3 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS100500RF | Ohmite Mfg Co | Res Wirewound 500 Ohm 1% 30/100W ±100ppm/C Aluminu RoHS : Compliant |
| 0 | ||
| NHS100 2R F | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
| HS100 10K F | Ohmite Mfg Co | Res Wirewound 10K Ohm 1% 30/100W ±25ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS100 2R F | Ohmite Mfg Co | Resistor Other Mounting Wirewound RoHS : Compliant |
| 0 | ||
| HS100 4K7 F | Ohmite Mfg Co | Res Wirewound 4.7K Ohm 1% 30/100W ±25ppm/C Aluminu RoHS : Compliant |
| 0 | ||
| HS100 R82 J | Ohmite Mfg Co | Res Wirewound 0.82 Ohm 5% 30/100W ±100ppm/C Alumin RoHS : Compliant |
| 0 | ||
| HS100FR1J200MMM372 | Ohmite Mfg Co | Aluminium Housed Resistors RoHS : Compliant |
| 0 | ||
| HS100 2R55 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS100 39R F | Ohmite Mfg Co | HS100 39R F RoHS : Compliant |
| 0 | ||
| HS100E6 10R F M193 | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
| HS100F1RF200MMM372 | Ohmite Mfg Co | HS100F1RF200MMM372 RoHS : Compliant |
| 0 | ||
| NHS100 25R J | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Not Compliant |
| 0 | ||
![]() Chip 1 Exchange | APHHS1005LSECK/J4-PF | Kingstate Electronics Corporation | INSTOCK | 2,178 | ||
| APHHS1005SURCK | Kingstate Electronics Corporation | INSTOCK | 2,000 | |||
| KPHHS-1005SURCK | INSTOCK | 1,000 | ||||
| EHS10-050-0B | INSTOCK | 21 | ||||
| APHHS1005QBC/D | Kingstate Electronics Corporation | INSTOCK | 5 | |||
![]() Avnet Abacus | KPHHS-1005CGCK | Kingbright | LED Single Chip Green 570nm 30mA 2Pin SMD TR (Alt: KPHHS-1005CGCK) RoHS : Compliant | 388,000 | ||
| KPHHS-1005SYCK | Kingbright | LED Single Chip Super Bright Yellow 590nm 30mA 2Pin SMD TR (Alt: KPHHS-1005SYCK) RoHS : Compliant | 264,000 | |||
| KPHHS-1005SURCK | Kingbright | LED Single Chip Hyper Red 635nm 30mA 2Pin SMD TR (Alt: KPHHS-1005SURCK) RoHS : Compliant | 234,000 | |||
| KPHHS-1005MGCK | Kingbright | LED Single Chip Mega Green 570nm 30mA 2Pin SMD TR (Alt: KPHHS-1005MGCK) RoHS : Compliant | 110,000 | |||
| KPHHS-1005LVCGCK | Kingbright | (Alt: KPHHS-1005LVCGCK) RoHS : Compliant | 14,000 | |||
| KPHHS-1005QBC-D-V | Kingbright | LED Low Power Blue SMD 1005 20 mA 33 V 465 nm (Alt: KPHHS-1005QBC-D-V) RoHS : Compliant | 10,000 | |||
| KPHHS-1005ZGC-V | Kingbright | KINKPHHS1005ZGCV (Alt: KPHHS-1005ZGC-V) RoHS : Compliant | 8,000 | |||
| KPHHS-1005LVSECK-J3-PF | Kingbright | LED Single Chip Hyper Red 625nm 30mA 2Pin SMD TR (Alt: KPHHS-1005LVSECK-J3-PF) RoHS : Compliant | 4,000 | |||
| HS100745 | TE Connectivity | (Alt: HS100745) RoHS : Compliant | 0 | |||
| BKP1005HS100-T | TAIYO YUDEN | Ferrite Bead 0402 1005 Metric 10 Ohm 2 A 30 Milliohm 25 (Alt: LFBKP1005HS100-T) RoHS : Compliant | 0 | |||
| KPHHS-1005SECK | Kingbright | LED UniColor Orange 610nm 2Pin Chip LED TR (Alt: KPHHS-1005SECK) RoHS : Compliant | 0 | |||
| SSHB10HS-10051 | KEMET Corporation | Choke Common Mode 51 mH 1 A (Alt: SSHB10HS-10051) RoHS : Compliant | 0 | |||
| KPHHS-1005PBC-A | Kingbright | KINKPHHS1005PBCA (Alt: KPHHS-1005PBC-A) RoHS : Compliant | 0 | |||
| KPHHS-1005VGC-A | Kingbright | (Alt: KPHHS-1005VGC-A) RoHS : Compliant | 0 | |||
| HDTF-4-04-S-RA-HS-100 | Samtec Inc | (Alt: HDTF-4-04-S-RA-HS-100) RoHS : Compliant | 0 | |||
![]() Avnet Asia | APHHS1005SYCK | Kingbright | STANDARD LEDS - SMD YELLOW 590NM WATER C (Alt: APHHS1005SYCK) RoHS : Compliant | 12,000 | ||
| APHHS1005SURCK | Kingbright | SMD Chip LED Lamp Hyper Red Water Clear reel (Alt: APHHS1005SURCK) RoHS : Compliant | 0 | |||
| APHHS1005CGCK | Kingbright | LED Single Chip Green 570nm 30mA 2-Pin SMD T/R (Alt: APHHS1005CGCK) RoHS : Compliant |
| 0 | ||
| APHHS1005SECK | Kingbright | (Alt: APHHS1005SECK) RoHS : Compliant | 0 | |||
| NTHS1005N01N5002JE | Vishay Intertechnologies | VISNTHS1005N01N5002JE NTHS-1005N01 50K 5 (Alt: NTHS1005N01N5002JE) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | HS-100B | C-Media Electronics Inc | USB Audio Codec improved on HS-100 with crystal-less design |
| 1 | |
| HS-100C | C-Media Electronics Inc | USB Audio Codec improved on HS-100B with crystal-less design |
| 1 | ||
| HS-100C-EVB-001 | C-Media Electronics Inc | HS-100BC Eval Board |
| 1 | ||
| WH-S1004-500-01 | Nipron Co |
| 0 | |||
| HS-100 | C-Media Electronics Inc | USB Audio Codec |
| 0 | ||
| AISC-1210HS-100K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| WH-S1005-500-03 | Nipron Co |
| 0 | |||
| ASPI-8040HS-100M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| WH-S1004-500-02 | Nipron Co |
| 0 | |||
| WH-S1005-500-02 | Nipron Co |
| 0 | |||
![]() Component Electronics, Inc | APHS1005SURCK | Kingbright | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | |
| APHHS1005CGCK | Kingbright | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,133 | ||
| 1008HS-100TJBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 500 | |||
| 1008HS-100TKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 437 | |||
| HS-100-20.000MHZ | NEL | IN STOCK SHIP TODAY | 24 | |||
THS1007IDA![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
![]() DB Roberts | THS1001-M07-F15 | UNICORP |
| 1 | ||
| HS10076A | Essentra Components | HOOK - S STYLESPRING STEEL | 0 | |||
| FHS-100 | Sugatsune Kogyo Co Ltd | WELD ON BUTT HINGE, 304 STAINL | 0 | |||
| SRLAHS-10-01 | Essentra Components | CB SptRivet MntNatural5/8 in Spc | 0 | |||
![]() Master Electronics | HS100-1K5-J | Ohmite Mfg Co | RoHS : Compliant |
| 485 | |
| 896H-1CH-S1-001-12VDC | Song Chuan Precision Company | Electromechanical Relay - SPDT - 50(NO)/30(NC) - 12VDC - 90 Ohm - Plug-In. RoHS : Compliant |
| 125 | ||
| HS100-1R-F | Ohmite Mfg Co | RoHS : Compliant |
| 10 | ||
| HDTF-3-06-S-RA-HS-100 | Samtec Inc | XCEDE HD 1.80 MM HIGH-DE RoHS : Compliant |
| 0 | ||
| HS100-30R-F | Ohmite Mfg Co | 100 WATTS AL HOUSED30 OHMS RoHS : Compliant |
| 0 | ||
| HS100-560R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100E6-10R-F-M193 | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-22R-J | Ohmite Mfg Co | 100 WATTS AL HOUSED22 OHMS RoHS : Compliant |
| 0 | ||
| HS100-R68-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100E6-22R-F-M193 | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100FR1J200MMM372 | Ohmite Mfg Co | 100 WATT AL HOUSED LEADED RoHS : Compliant |
| 0 | ||
| HDTF-6-08-S-RA-HS-100 | Samtec Inc | XCEDE HD 1.80 MM HIGH-DE RoHS : Compliant |
| 0 | ||
| HS100-3K6-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-3R3-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100F1RF200MMM372 | Ohmite Mfg Co | 100 WATT AL HOUSED LEADED RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06128/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Male Right Angle to N Female Cable 100 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly TNC male right angle to N female cable 100 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male right angle to N female cable 100 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and N type cable connection on the other. Our right angle TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3W06128/HS-100CM, can also be known as a right angle TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3W06128/HS-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06128/HS-100CM can also be used in the other direction and will be type N female to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N female cable 100 cm length using LMR-195 coax with heatshrink. |
| 1,484 | |
| PE3W01505/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity TNC Male to SMA Male Right Angle Cable 100 cm Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC male to SMA male right angle cable 100 cm length using LMR-240 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC male to SMA male right angle cable 100 cm length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and right angle SMA cable connection on the other. Our reverse polarity TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity TNC to SMA cable is a male to male coax assembly, PE3W01505/HS-100CM, can also be known as a reverse polarity TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to SMA plug cable assembly PE3W01505/HS-100CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity TNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01505/HS-100CM can also be used in the other direction and will be right angle SMA male to reverse polarity TNC male cable assembly if the opposite connectivity is required. TNC reverse polarity plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to SMA male right angle cable 100 cm length using LMR-240 coax with heatshrink. |
| 1,015 | ||
| PE3C8634LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C8634LF/HS-100CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8634LF/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C8634LF/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 847 | ||
| PE3994/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Female Bulkhead to BNC Male Right Angle Cable 100 cm Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC male right angle cable 100 cm length using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female bulkhead to BNC male right angle cable 100 cm length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This BNC to BNC cable is a female to male coax assembly, PE3994/HS-100CM, can also be known as a BNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC plug cable assembly PE3994/HS-100CM is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency BNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3994/HS-100CM can also be used in the other direction and will be right angle BNC male to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to BNC male right angle cable 100 cm length using RG188 coax with heatshrink. |
| 425 | ||
| PE3W02140/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to BNC Female Bulkhead Cable 100 cm Length Using RG188 Coax with HeatShrink., Radio frequency assembly SMA male to BNC female bulkhead cable 100 cm length using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC female bulkhead cable 100 cm length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC bulkhead cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE3W02140/HS-100CM, can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3W02140/HS-100CM is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02140/HS-100CM can also be used in the other direction and will be BNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female bulkhead cable 100 cm length using RG188 coax with heatshrink. |
| 425 | ||
| PE38330/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Mini SMP Female to SMA Female Bulkhead Cable Using PE-SR405FL Coax with HeatShrink in 100CM., Radio frequency assembly mini SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink in 100CM, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and SMA bulkhead cable connection on the other. Our mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This mini SMP to SMA cable is a female to female coax assembly, PE38330/HS-100CM, can also be known as a mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE38330/HS-100CM is built with PE-SR405FL which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency mini SMP female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38330/HS-100CM can also be used in the other direction and will be SMA female bulkhead to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink in 100CM. |
| 9 | ||
| PE3C10163/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SSMA Male to SSMC Plug Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly SSMA male to SSMC plug low loss cable 100 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to SSMC plug low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a SSMC cable connection on the other. Our low loss SSMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10163/HS-100CM can also be known as a low loss SSMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10163/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SSMA plug to SSMC male cable assembly PE3C10163/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10163/HS-100CM can also be used in the other direction and will be a SSMC plug to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMC cable assembly for quick shipment worldwide. Variations of SSMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2478/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. BNC Male to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2478/HS-100CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3C2478/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2478/HS-100CM can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W06083/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Push-On SMP Female Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA female to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA female to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle SMP cable connection on the other. Our low loss reverse polarity SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W06083/HS-100CM can also be known as a low loss reverse polarity SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to SMP jack cable assembly PE3W06083/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06083/HS-100CM can also be used in the other direction and will be right angle SMP female to reverse polarity SMA female cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C2126/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to BNC Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to BNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to BNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our low loss right angle SMA to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2126/HS-100CM can also be known as a low loss right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2126/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2 GHz maximum frequency SMA right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2126/HS-100CM can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W02070/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Male Cable 100 CM Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 100 cm length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 100 cm length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W02070/HS-100CM, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02070/HS-100CM is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 100 cm length using RG316 coax with heatshrink. |
| 0 | ||
| PE3W04043/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to MMCX Jack Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 100 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to MMCX jack low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and MMCX cable connection on the other. Our low loss SMA to MMCX cable assemblies have a male gender on end 1 and jack on end 2. This SMA to MMCX cable is a male to jack coax assembly, PE3W04043/HS-100CM, can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX female cable assembly PE3W04043/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04043/HS-100CM can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX jack low loss cable 100 cm length using LMR-100 coax. |
| 0 | ||
| PE3W05509/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to TNC Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W05509/HS-100CM can also be known as a low loss right angle SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05509/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3W05509/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05509/HS-100CM can also be used in the other direction and will be a TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2779/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Water Blue FAKRA Jack to FAKRA Plug Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to FAKRA plug cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Water blue FAKRA jack to FAKRA plug cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a jack gender on end 1 and plug on end 2. This FAKRA to FAKRA cable is a jack to plug coax assembly, PE3C2779/HS-100CM, can also be known as a FAKRA female to FAKRA male cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA male cable assembly PE3C2779/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2779/HS-100CM can also be used in the other direction and will be FAKRA plug to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to FAKRA male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to FAKRA plug cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C5020LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to SMA Male Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C5020LF/HS-100CM can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5020LF/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC plug to SMA plug cable assembly PE3C5020LF/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5020LF/HS-100CM can also be used in the other direction and will be a right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Vyrian | BKP1005HS100-TV | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | 18,026 | ||
| BKP1005HS100-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | 16,862 | |||
| HS10025RF | Ohmite Manufacturing | Fixed Resistor, Wire Wound, 100W, 25ohm, 1900V, 1% +/-Tol, 100ppm/Cel, Chassis Mount | 15,481 | |||
THS1009IDAR![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 9,835 | |||
THS1007CDA![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 9,584 | |||
THS1009CDAR![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 9,510 | |||
THS1009CDA![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 8,846 | |||
| HS10040RF | Ohmite Manufacturing | Fixed Resistor, Wire Wound, 100W, 40ohm, 1900V, 1% +/-Tol, 100ppm/Cel, Chassis Mount | 8,516 | |||
THS10064IDAR![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 7,609 | |||
| THS1009EVM | Texas Instruments | 6,699 | ||||
THS10064CDARG4![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 5,413 | |||
THS10082CDAR![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 4,994 | |||
| THS10064IDARG4 | Texas Instruments | A/D Converter, 10-Bit, 1 Func, 1 Channel, CMOS, PDSO32 RoHS : Compliant | 4,675 | |||
| THS10082CDARG4 | Texas Instruments | A/D Converter, 10-Bit, 2 Channel, CMOS, PDSO32 RoHS : Compliant | 3,001 | |||
THS10082CDAG4![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 3,001 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |