EPR1104 Price, Distributor, Stock

Key Specifications. Plating Powder Coat Material Galvanized Steel. Non-Penetrating Antenna Peak Roof Mount, 1-pole Version,60-inch Mast, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM1 non-penetrating antenna peak roof mount is available for antenna installations and it is easy to transport. This 1-pole version non-penetrating antenna roof mount has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers. This 1-pole version communication antenna mount has a 60 inch center mast and doesn’t need screws or anchors, which minimizes damage to the roofs. Our PEPRM1 non-penetrating antenna peak roof mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. This non-penetrating antenna roof mount has a powder coating to withstand harsh climates and corrosion. This non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. The non-penetrating antenna roof mount is used for peak roofs and is available with easy assembly instructions. Pasternack has one of the largest in-stock selection of non-penetrating antenna peak roof mount for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 1-pole version non-penetrating antenna mount for your requirements. Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others.

1 : $413.99
10 : $397.43
25 : $380.87
100 : $364.31

263

PEPRMARM

Pasternack Enterprises

Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only. The Pasternack’s PEPRMARM non-penetrating antenna peak roof mount pole is available for antenna installations and it is easy to transport. This 34-inch non-penetrating antenna mount pole has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers, This peak roof mount pole has a powder coating to withstand harsh climates and corrosion. The non-penetrating antenna peak roof mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. Our non-penetrating roof mount is used for peak roofs and is available with easy assembly instructions, The non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners that can be mounted on roofs. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. This non-penetrating antenna peak roof mount pole doesn’t need screws or anchors, which minimizes damage to the roofs, Pasternack has one of the largest in-stock selection of non-penetrating antenna peak roof mount pole for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 34-inch non-penetrating antenna roof mount pole for your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others.

1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65

PEPRM1-KIT

Pasternack Enterprises

Key Specifications. Plating Powder Coat Material Galvanized Steel. Non-Penetrating Peak Roof Mount with 2 Rubber Mats, 1-pole Version, 60-inch Mast, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM1-KIT is a non-penetrating antenna peak roof mount kit that includes 2 rubber mats (PENPMMAT) and 1-pole version non-penetrating peak roof mount (PEPRM1) that helps in easy installation of satellite dishes and antennas. This kit is used for easy installation of the peak roof mount which is available without pre-assembly. , This kit comes with a rubber mat that provides the best surface tension and surface protection. The non-penetrating antenna peak roof mount which has a 60-inch center mast and it is suitable for roof applications. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. , Pasternack’s non-penetrating antenna peak roof mount kit is available in stock and ready to ship the same day. Different kits are available with easy buy options for 1-pole version peak roof mount kit with detailed step-by-step installation documents. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect non-penetrating antenna peak roof mount kit as per your requirements. Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others.

1 : $684.99
10 : $657.59
25 : $630.19
100 : $602.79

PEPRM2

Pasternack Enterprises

Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Peak Roof Mount 60-inch Mast and 34-inch Extra Pole, 2-pole Version, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM2 non-penetrating antenna peak roof mount is available for antenna installations and it is easy to transport. The 2-pole version communication antenna mount has peak roof top mount with 60 inch center mast(PEPRM1) and 34-inch extra arm(PEPRMARM).This non-penetrating antenna mount has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers, This peak roof mount has a powder coating to withstand harsh climates and corrosion. The NPM mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. The non-penetrating antenna roof mount is used for peak roofs and is available with easy assembly instructions, This PEPRM2 non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. The peak roof mount doesn’t need screws or anchors, which minimizes damage to the roofs, Pasternack has one of the largest in-stock selection of 2-pole version non-penetrating antenna peak roof mount for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 2-pole version non-penetrating antenna mount for your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others.

1 : $577.99
10 : $554.87
25 : $531.75
100 : $508.63

PEPRM2-KIT

Pasternack Enterprises

Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Peak Roof Mount 60-inch Mast, 34-inch Extra Pole and 2 Rubber Mats, 2-pole Version, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM2-KIT is a non-penetrating antenna peak roof mount kit has 2-pole version non-penetrating peak roof mount (PEPRM2) which includes the 60-inch(PEPRM1) and 34-inch poles(PEPRMARM) and 2 rubber mats (PENPMMAT) that helps in easy installation of satellite dishes and antennas. This kit is used for easy installation of the peak roof mount which is available without pre-assembly. This kit comes with a rubber mat that provides the best surface tension and surface protection. The non-penetrating antenna peak roof mount included in this kit is portable and suitable for a range of roof applications. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. Pasternack’s non-penetrating antenna peak roof mount kit is available in stock and ready to ship the same day. Different kits are available with easy buy options for 2-pole version non-penetrating antenna peak roof mount kit with detailed step-by-step installation documents. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect non-penetrating antenna peak roof mount kit as per your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others.

1 : $823.99
10 : $791.03
25 : $758.07
100 : $725.11

EPR1104 Distributor

Link URL