 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C630 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Onlinecomponents.com | CLT25N-C630-INCHES | Panduit Corp | RoHS : Compliant |
| 732 | |
| CLT25N-C630 | Panduit Corp | Corrugated loom tubing slit wall, .25" (6.4mm) x 100' (30.5m), heat stabilized black nylon 6. RoHS : Compliant |
| 31 | ||
| CLT62N-C630 | Panduit Corp | Corrugated loom tubing slit wall, .62" x 100' heat stabilized black nylon 6. RoHS : Compliant |
| 26 | ||
| CLT100N-C630 | Panduit Corp | Corrugated loom tubing slit wall, 1" (25.4mm) x 100' (30.5m), heat stabilized black nylon 6. RoHS : Compliant |
| 21 | ||
| CLT50N-C630 | Panduit Corp | Corrugated loom tubing slit wall, .50" (12.7mm) x 100' (30.5m), heat stabilized black nylon 6. RoHS : Compliant |
| 13 | ||
| CLT75N-C630 | Panduit Corp | Corrugated loom tubing slit wall, .75" (19.1mm) x 100' (30.5m), heat stabilized black nylon 6. RoHS : Compliant |
| 4 | ||
| THMSC35-C630 | Panduit Corp | Harness Board Accessories System RoHS : Compliant |
| 0 | ||
| CLT35N-C630 | Panduit Corp | Corrugated loom tubing slit wall, .35" (8.9mm) x 100' (30.5m), heat stabilized black nylon 6. RoHS : Compliant |
| 0 | ||
| CLT38N-C630 | Panduit Corp | Corrugated loom tubing slit wall, .38" (9.7mm) x 100' (30.5m), heat stabilized black nylon 6. RoHS : Compliant |
| 0 | ||
| 060-C630-01 | Honeywell Test and Measurement | BL113DV,4A,6X,7X MODEL 73 RoHS : Compliant |
| 0 | ||
 Avnet Americas | FDC6306P | onsemi | - Tape and Reel (Alt: FDC6306P) RoHS : Compliant |
| 21,000 | |
| FDC6303N | onsemi | - Tape and Reel (Alt: FDC6303N) RoHS : Compliant |
| 12,000 | ||
| FDC6301N | onsemi | - Tape and Reel (Alt: FDC6301N) RoHS : Compliant |
| 9,000 | ||
| MFRC63001HN,518 | NXP Semiconductors | - Tape and Reel (Alt: MFRC63001HN,518) RoHS : Not Compliant | 6,000 | |||
| DSC6301CI1CB-012.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 12MHz, 50PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm - Rail/Tube (Alt: DSC6301CI1CB-012.0000) RoHS : Not Compliant |
| 0 | ||
| DSC6301HL1FB-020.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 20MHz, 50PPM, 1.8-3.3V, -40 to 105C, 1.6 x 1.2mm - Bag (Alt: DSC6301HL1FB-020.0000) RoHS : Not Compliant |
| 0 | ||
| 55PC6301-24-6/9-9CS3345 | TE Connectivity | - Bulk (Alt: CX0859-000) RoHS : Compliant | 0 | |||
| XD6123C630MR-Q | Torex Semiconductor LTD | Voltage Supervisor, 3V, 1 V to 6 V, Open-Drain, SOT-25, 5 Pins, Surface Mount, 50 ms, -40 ?C - Tape and Reel (Alt: XD6123C630MR-Q) RoHS : Compliant |
| 0 | ||
| DSC6301BL1BB-050.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 50MHz, 50PPM, 1.8-3.3V, -40 to 105C, 5.0x3.2mm - Rail/Tube (Alt: DSC6301BL1BB-050.0000) RoHS : Not Compliant |
| 0 | ||
| DSC6301JL1LB-001.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 1MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm - Tape and Reel (Alt: DSC6301JL1LB-001.0000T) RoHS : Not Compliant |
| 0 | ||
| 55PC6309-10-9-9-9CS2970 | TE Connectivity | - Bag (Alt: CW7270-000) RoHS : Compliant |
| 0 | ||
| DSC6301HI2DB-012.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 12MHz, 25PPM, 1.8-3.3V, -40 to 85C, 1.6 x 1.2mm - Bag (Alt: DSC6301HI2DB-012.0000) RoHS : Not Compliant |
| 0 | ||
| DSC6301JI2AB-002.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 2MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm - Rail/Tube (Alt: DSC6301JI2AB-002.0000) RoHS : Not Compliant |
| 0 | ||
| DSC6301JI2AB-002.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 2MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm - Tape and Reel (Alt: DSC6301JI2AB-002.0000T) RoHS : Not Compliant |
| 0 | ||
| C630C154KCR5TA | KEMET Corporation | C630C154KCR5TA - Bulk (Alt: C630C154KCR5TA) RoHS : Not Compliant |
| 0 | ||
 Mouser Electronics | AB-PL3535C630-3VX4 | American Bright Optoelectronics | Single Color LEDs 3535 1W-4W RED SMT LED, 630NM RoHS : Compliant |
| 1,976 | |
| AB-PL3535C630-3VX3 | American Bright Optoelectronics | Single Color LEDs 3535 1W-3W RED SMT LED, 630NM RoHS : Compliant |
| 1,975 | ||
| 0650C6300-11 | Belden Inc | Cartridge Fuses Ceramic Tube Fuse, 6x32 mm Size, Fast Blow, 6.3A RoHS : Compliant |
| 1,972 | ||
| 0652C6300-11 | Belden Inc | Cartridge Fuses Glass Tube Fuse, 5x20 mm Size, Slow Blow, 6.3A RoHS : Compliant |
| 1,815 | ||
| DAC63004YBHR | Texas Instruments | Digital to Analog Converters - DAC Ultra-low-power four -channel 12-bit sma RoHS : Compliant |
| 960 | ||
| L2C6-30HG3L08A1500 | Lumileds | White LEDs Warm-white CoB 90 CRI RoHS : Compliant |
| 576 | ||
| L2C6-30HG3L05A1300 | Lumileds | White LEDs Warm-white CoB 90 CRI RoHS : Compliant |
| 565 | ||
| L2C6-30803L08A1500 | Lumileds | White LEDs LUXEON CS CoB Warm-white CoB 80 CRI 3000K RoHS : Compliant |
| 149 | ||
| DAC63004WCSP-EVM | Texas Instruments | Data Conversion IC Development Tools DAC63004W evaluation module for four-cha RoHS : Compliant |
| 9 | ||
| C630C102KHR5TA | KEMET Corporation | Multilayer Ceramic Capacitors MLCC - Leaded 3000V 1000pF X7R 10% LS=0.3 in RoHS : Compliant |
| 0 | ||
| C630C103KDR5TA | KEMET Corporation | Multilayer Ceramic Capacitors MLCC - Leaded 1000V 0.01uF X7R 10% LS=7.62mm RoHS : Compliant |
| 0 | ||
| C630C102KDR5TA | KEMET Corporation | Multilayer Ceramic Capacitors MLCC - Leaded 1000V 1000pF X7R 10% LS=7.62mm RoHS : Compliant |
| 0 | ||
| C630C472MGR5TA | KEMET Corporation | Multilayer Ceramic Capacitors MLCC - Leaded 2000V 4700pF X7R 20% LS=7.62mm |
| 0 | ||
| C630C101JHG5TA | KEMET Corporation | Multilayer Ceramic Capacitors MLCC - Leaded 3000V 100pF C0G 5% LS=0.3 in RoHS : Compliant |
| 0 | ||
| C630C332MDG5TA | KEMET Corporation | Multilayer Ceramic Capacitors MLCC - Leaded 1000V 3300pF C0G 20% LS=7.62mm |
| 0 | ||
 Newark | FDC6303N | onsemi | Mosfet, Dual, N, Smd, Supersot-6; |Onsemi FDC6303N RoHS : Compliant |
| 115,098 | |
| FDC6303N | onsemi | Mosfet, Dual, N, Smd, Supersot-6; |Onsemi FDC6303N RoHS : Compliant |
| 115,098 | ||
| MFRC63003HNY | NXP Semiconductors | Mifare -Ntag Frontend -Reel; |NXP Semiconductors MFRC63003HNY RoHS : Compliant |
| 6,000 | ||
| TMC6300-LA-T | Analog Devices Inc | Motor Driver, 3-Ph Bldc/Pmsm, 125Deg C; |Trinamic/analog Devices TMC6300-LA-T RoHS : Compliant |
| 5,570 | ||
| TMC6300-LA-T | Analog Devices Inc | Motor Driver, 3-Ph Bldc/Pmsm, 125Deg C; |Trinamic/analog Devices TMC6300-LA-T RoHS : Compliant |
| 5,570 | ||
| TMC6300-LA | Analog Devices Inc | Dc Motor Driver, Half Bridge, Qfn-Ep-20; |Analog Devices, Inc. TMC6300-LA RoHS : Compliant |
| 319 | ||
| VCC-63048 | Essentra Components | Screw Mount Cable Clamp, Blk, Pvc/Steel; Cable Clamp/Clip Type:Screw Mount Cable Clamp; Internal Diameter:0.5"; Cable Clamp/Clip Material:Pvc (Polyvinylchloride), Steel; Cable Clamp/Clip Colour:Black; External Length:1.89" Rohs Compliant: Yes RoHS : Compliant |
| 142 | ||
| MKP1848C63090JP5 | Vishay Intertechnologies | Film Capacitor, 30Uf, 900V, Radial; |Vishay MKP1848C63090JP5 RoHS : Compliant |
| 63 | ||
| MQDC-630 | Banner Engineering Corp | Cbl Assy, M12 Recpt-Free End, 29.5; |Banner Engineering MQDC-630 RoHS : Not Compliant |
| 8 | ||
| CLT75N-C630 | Panduit Corp | Tubing, Slit Corrugated Loom, 19.3Mm, Black, 100Ft; Sleeving/Tubing Type:Split Corrugated Loom; Sleeving Material:Nylon (Polyamide); Sleeving Colour:Black; Internal Diameter:19.3Mm; Length - Metric:30.5M; Length - Imperial:100Ft Rohs Compliant: Yes (Alternate Part Number: 07498328720 RoHS : Compliant |
| 8 | ||
| DC630A | Analog Devices Inc | Demo Board, Piezo Driver, Power Mangmnt; |Analog Devices, Inc. DC630A RoHS : Compliant |
| 6 | ||
| DC63-01577B | Samsung Semiconductor | Cushion Lid |Samsung DC63-01577B RoHS : Not Compliant |
| 6 | ||
| TMC6300-BOB | Analog Devices Inc | Breakout Board, Pms & Bldc Motor Driver; |Trinamic/analog Devices TMC6300-BOB RoHS : Compliant |
| 5 | ||
| CLT50N-C630 | Panduit Corp | Tubing, Slit Corrugated Loom, 12.8Mm, Black, 100Ft; Sleeving/Tubing Type:Split Corrugated Loom; Sleeving Material:Nylon (Polyamide); Sleeving Colour:Black; Internal Diameter:12.8Mm; Length - Metric:30.5M; Length - Imperial:100Ft Rohs Compliant: Yes (Alternate Part Number: 07498328718 RoHS : Compliant |
| 5 | ||
| CC630 | Marathon Special Products | Fuse Cover, 30A, 600V, Ip20; Product Range:- Rohs Compliant: Yes |Marathon Special Products CC630 RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | TMC6300-LA | Analog Devices Inc | Low Voltage BLDC Motor/PMSM Dr RoHS : Compliant |
| 486 | |
| HMC630LP3E | Analog Devices Inc | HBT Vector Modulator SMT, 700 RoHS : Compliant |
| 172 | ||
| TMC6300-LA-T | Analog Devices Inc | Low Voltage BLDC Motor/PMSM Dr RoHS : Compliant |
| 71 | ||
| EV1HMC6301BG46 | Analog Devices Inc | HMC6301BG46 Evaluation PCB |
| 57 | ||
| DC630A | Analog Devices Inc | LT3469ETS8 - Piezoceramic Micr |
| 53 | ||
| EV1HMC6300BG46 | Analog Devices Inc | HMC6300BG46 Evaluation PCB |
| 30 | ||
| 117198-HMC630LP3 | Analog Devices Inc | HMC630LP3 Evaluation PCB RoHS : Compliant |
| 13 | ||
| TMC6300-EVAL | Analog Devices Inc | BLDC Driver Evaluation board f |
| 5 | ||
| TMC6300-BOB | Analog Devices Inc | BLDC Driver Breakout board for |
| 5 | ||
| TMC6300-EVAL-KIT | Analog Devices Inc | BLDC Driver Evaluation kit for |
| 1 | ||
| HMC630LP3ETR | Analog Devices Inc | HBT Vector Modulator SMT, 700 RoHS : Compliant |
| 0 | ||
 NXP Semiconductors | MFRC63003HNY | NXP Semiconductors | MIFARE®/NTAG Frontend, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 5,104 | |
 RS | TSC-630MA | OptiFuse | FUSE, UL, 5 X 20MM, GLASS, SLOW-BLOW, 250V, 630MA |
| 45 | |
| FSC-630MA | OptiFuse | FUSE, UL, 5 X 20MM, GLASS, FAST-ACTING, 250V, 630MA |
| 44 | ||
| BK/GDC-630MA | Eaton Electronics | FUSE, 630 MA, 250 VAC (MAX.), TIME DELAY, 0.197 IN. L X 0.788 IN. DIA., GLASS |
| 35 | ||
| VBC6-30-10-01 | ABB Low Voltage Products and Systems | REV 3P MI CONTR, 24VDC |
| 19 | ||
| BC6-30-01-01 | ABB Low Voltage Products and Systems | BC6-30 3 POLE CONTACTOR, 9 A, 4 KW, 24 V DC COIL |
| 9 | ||
| 569203 (UD9C630AL) | nVent ERIFLEX | DISTRIBUTION BLOCK, 1 POLE, 420A, UL, 1 LINE, 9 LOAD CONNECTIONS, UD SERIES |
| 8 | ||
| GMC-630-R | Eaton Electronics | GMC 630MA BUSS FUSE |
| 6 | ||
| NPC-6307 | Quest Technology International Inc | PATCH CORD, RJ45 PLUG X 2, CAT6, 7FT., RED, UL STANDARDS, BOOTED |
| 3 | ||
| BC6-30-10-P01 | ABB Low Voltage Products and Systems | BC6-30 3 POLE CONTACTOR, 9 A, 4 KW, 24 V DC COIL |
| 2 | ||
| VBC6-30-10-P07 | ABB Low Voltage Products and Systems | MI.CTR 6.8A 12VDC 2NO PCB |
| 2 | ||
| NPC-6305 | Quest Technology International Inc | PATCH CORD, RJ45 PLUG X 2, CAT6, 5FT., RED, UL STANDARDS, BOOTED |
| 1 | ||
| BC6-30-01-F01 | ABB Low Voltage Products and Systems | 3P CONTR.24VDC FLAT PIN 1-NC |
| 1 | ||
| BC6-30-10-1.4 | ABB Low Voltage Products and Systems | 3P INTERFACE CONTR 24VDC 1NO |
| 1 | ||
| VBC6-30-01-P01 | ABB Low Voltage Products and Systems | MINIATURE CONTACTOR, MECHANICALLY INTERLOCKED, 2NC, 3 POLE, 24 VDC, RAIL MOUNT |
| 1 | ||
| OTDC630FV11-ESS (1SCA158251R1001) | ABB Low Voltage Products and Systems | NON-FUSED DISCONNECT SWITCH 630A 2 POLES 1500VDC, PANEL MOUNT, UL98B |
| 1 | ||
 Microchip Technology Inc | PIC16C63-04/SP | Microchip Technology Inc | MCU CMOS 28 LD 4MHZ 4K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 370 | |
| DSC6301JI2AB-040.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 40MHz, 25ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VLGA, Projected EOL: 2051-04-09 RoHS : Compliant |
| 350 | ||
| DSC6301JI2AB-040.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 40MHz, 25ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VLGA, Projected EOL: 2051-04-09 RoHS : Compliant |
| 350 | ||
| DSC6302JI1AB-033.3000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 33.3MHz, 50ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VLGA, Projected EOL: 2051-09-25 RoHS : Compliant |
| 128 | ||
| DSC6301CI1CB-012.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 12MHz, 50PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-01-16 RoHS : Compliant |
| 0 | ||
| DSC6301HL1FB-020.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 20MHz, 50PPM, 1.8-3.3V, -40 to 105C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2046-04-12 RoHS : Compliant |
| 0 | ||
| DSC6301BL1BB-050.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 50MHz, 50PPM, 1.8-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-02-03 RoHS : Compliant |
| 0 | ||
| DSC6301HI2DB-012.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 12MHz, 25PPM, 1.8-3.3V, -40 to 85C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2045-12-06 RoHS : Compliant |
| 0 | ||
| DSC6301JI2AB-002.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 2MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VLGA, Projected EOL: 2045-11-20 RoHS : Compliant |
| 0 | ||
| DSC6301JE2AB-050.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 50MHz, 25PPM, 1.8-3.3V, -20 to 70C, 2.5 x 2.0mm, VLGA, Projected EOL: 2046-05-29 RoHS : Compliant |
| 0 | ||
| DSC6302JI1AB-033.3000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 33.3MHz, 50ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VLGA, Projected EOL: 2051-09-25 RoHS : Compliant |
| 0 | ||
| DSC6301JL1LB-001.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 1MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VLGA, Projected EOL: 2046-09-11 RoHS : Compliant |
| 0 | ||
| DSC6301JI2AB-002.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 2MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VLGA, Projected EOL: 2045-11-20 RoHS : Compliant |
| 0 | ||
| DSC6301MI2AB-025.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 25MHz, 25ppm, 1.8-3.3V, -40 to 85C, 2.0x1.6mm, VFLGA, Projected EOL: 2051-06-05 RoHS : Compliant |
| 0 | ||
| DSC6301JI2CB-033.3333T | Microchip Technology Inc | MEMS OSC, LVCMOS, 33.3333MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VLGA, Projected EOL: 2051-08-18 RoHS : Compliant |
| 0 | ||
 Rochester Electronics | MFRC63002HN,151 | NXP Semiconductors | NFC/RFID Tag and Transponder ICs RFID Reader 13.56MHz 32-QFN Tray RoHS : Compliant |
| 22,371 | |
| MFRC63003HNY | NXP Semiconductors | NFC/RFID Tag and Transponder ICs RFID Reader 13.56MHz 32-QFN T/R RoHS : Compliant |
| 7,325 | ||
| MFRC63003HNE | NXP Semiconductors | Telecom Circuit RoHS : Compliant |
| 1,590 | ||
| MFRC63002HN,118 | NXP Semiconductors | Telecom Circuit, 1-Func, PQCC32 RoHS : Compliant |
| 36,000 | ||
| FDC6303N | onsemi | Dual N-Channel Digital FET 25V, 0.68A, 0.45 RoHS : Compliant |
| 973 | ||
| FDC6301N | onsemi | Dual N-Channel Digital FET 25V, 0.22A, 4Ω RoHS : Compliant |
| 715 | ||
| FDC6302P | onsemi | Small Signal Field-Effect Transistor, 0.12A, 25V, 2-Element, P-Channel, MOSFET RoHS : Compliant |
| 2,927 | ||
| FDC6304P | onsemi | Dual P-Channel Digital FET -25V, -0.46A, 1.1Ω RoHS : Compliant |
| 75,695 | ||
| HMC630LP3E | Analog Devices Inc | RF Modulator and Demodulator Vector Modulator, Mixer 16-QFN Cut Tape RoHS : Compliant |
| 9 | ||
| HMC6301BG46 | Analog Devices Inc | RF Receiver 57GHz 64GHz AM, FM, FSK, ISM, MSK, OOK 75-BGA Tray RoHS : Compliant |
| 1,064 | ||
FDC6301N | Fairchild Semiconductor Corporation | Dual N-Channel Digital FET 25V, 0.22A, 4Ω RoHS : Compliant |
| 1 | ||
| FDC6302P | Fairchild Semiconductor Corporation | Small Signal Field-Effect Transistor, 0.12A, 25V, 2-Element, P-Channel, MOSFET RoHS : Compliant |
| 65,791 | ||
| FDC6304P | Fairchild Semiconductor Corporation | Dual P-Channel Digital FET -25V, -0.46A, 1.1Ω RoHS : Compliant |
| 127 | ||
| FDC6308P | Fairchild Semiconductor Corporation | Small Signal Field-Effect Transistor, 1.7A, 20V, 2-Element, P-Channel, MOSFET RoHS : Compliant |
| 28,908 | ||
| HMC630LP3ETR | Hittite Microwave Corp | Modulator, Vector, 700MHz Min, 1000MHz Max RoHS : Compliant |
| 636 | ||
 Sager | LFRC63009 | Hubbell Incorporated | AL LADDER,RDCR CNTR,6H,30W1,09W2 |
| 0 | |
| LYMC-63000-721PASM | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| LYMC-63000-731 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| STC-630L3 | OMRON Electronic Components | Omron 0.4MP 1/3 NTSC Board No lens | 0 | |||
| BK/GMC-630-R | Eaton Bussmann | Cartridge Fuses 630mA 250VAC TD GMC Series RoHS : Compliant |
| 0 | ||
| EC6305-000 | TE Connectivity | Wire Labels & Markers 11591928 RoHS : Compliant | 0 | |||
| LYMC-63000-740 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| CLT75N-C630 | Panduit Corp | Spiral Wraps, Sleeves, Tubing & Conduit Corr. Loom Tub Slit .75 (19.1mm) |
| 0 | ||
| AAC6306-00 | TE Connectivity | TE Connectivity 100P3068-S50-1-CHP-L40 | 0 | |||
| STC-630CS3 | OMRON Electronic Components | Omron 1/3, Color NTSC, BOARD | 0 | |||
| STC-630PWT | OMRON Electronic Components | Omron 1/3,color NTSC | 0 | |||
| LYMC-63000-730PASM | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| EC6303-000 | TE Connectivity | Wire Labels & Markers 11591926 RoHS : Compliant | 0 | |||
| GMC-630-R | Eaton Bussmann | Cartridge Fuses 630mA 250VAC TD GMC Series |
| 0 | ||
| CLT62N-C630 | Panduit Corp | Spiral Wraps, Sleeves, Tubing & Conduit Corr. Loom Tubing Slit .62 |
| 0 | ||
 TME | MFRC63002HN,151 | NXP Semiconductors | MFRC63002HN,151 RoHS : Compliant |
| 14,160 | |
| HT4C630 | HÖGERT TECHNIK | Knife; carton,textiles,universal; 18mm |
| 36 | ||
| AAC6301-00 | TE Connectivity | AAC6301-00 |
| 12 | ||
| AK-CC6308EP01 | Akasa | Active heatsink; 12VDC; aluminium; 61.6m3/h; H: 31.8mm; W: 96mm |
| 5 | ||
| CLT38N-C630 | Panduit Corp | Protective tube; polyamide 6; black; L: 30.5m; Øint: 10mm; UL94HB |
| 1 | ||
| 0ADKC6300-BE | Bel Fuse | Fuse: fuse; 5x20mm; ceramic,cylindrical; 6.3A; 500VAC; time-lag RoHS : Compliant |
| 0 | ||
| ALS71C162QC630 | KEMET Corporation | Capacitor: electrolytic; 1.6mF; 630VDC; Ø90x67mm; ±20%; 20000h RoHS : Compliant |
| 0 | ||
| EFI-P2 AC 63/0.1 | ETI Polam | RCD breaker; Inom: 63A; Ires: 100mA; Poles: 2; 230V,240V; IP20; EFI |
| 0 | ||
| 0651C6300-11 | Bel Fuse | Fuse: fuse; 5x20mm; glass; holders; 6.3A; 250VAC; quick blow; 0651C RoHS : Compliant |
| 0 | ||
| BK-GDC-630MA | Eaton Bussmann | Fuse: fuse; 5x20mm; cylindrical,glass; 630mA; 250VAC; time-lag |
| 0 | ||
| EFI-P2 AC 63/0.5 | ETI Polam | RCD breaker; Inom: 63A; Ires: 500mA; Poles: 2; 230V,240V; IP20; EFI |
| 0 | ||
| SPC 6300 RP | OPTIBELT GmbH | Wedge belt; SPC; 6300mm; metric; RED POWER 3; Features: antistatic |
| 0 | ||
| CLT35N-C630 | Panduit Corp | Protective tube; polyamide 6; black; L: 30.5m; Øint: 8.9mm; UL94HB |
| 0 | ||
| ALS70G162QC630 | KEMET Corporation | Capacitor: electrolytic; 1.6mF; 630VDC; Ø90x67mm; ±20%; 20000h RoHS : Compliant |
| 0 | ||
| CLT75N-C630 | Panduit Corp | Protective tube; polyamide 6; black; L: 30.5m; Øint: 19.5mm; UL94HB |
| 0 | ||
 ComSIT USA | TP3A225M010C6300AC | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,205 | ||
| FDC6303N | Fairchild Semiconductor Corporation | DIGITAL FET, DUAL N-CHANNEL Small Signal Field-Effect Transistor, 0.68A I(D), 25V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 3,000 | |||
| FDC6301N | Fairchild Semiconductor Corporation | DUAL N-CHANNEL , DIGITAL FET Small Signal Field-Effect Transistor, 0.22A I(D), 25V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,805 | |||
| FDC6302P | Fairchild Semiconductor Corporation | DIGITAL FET, DUAL P-CHANNEL Small Signal Field-Effect Transistor, 0.12A I(D), 25V, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,475 | |||
| FDC6308P | Fairchild Semiconductor Corporation | DUAL P-CHANNEL 2.5 V SPECIFIED POWERTRENCH MOSFET Small Signal Field-Effect Transistor, 1.7A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 1,970 | |||
| PIC16C6304SP | mtc | 8-BIT CMOS MICROCONTROLLER RISC Microcontroller, 8-Bit, OTPROM, PIC16 CPU, 4MHz, CMOS, PDIP28 RoHS : Not Compliant | 1,200 | |||
| HHXC630ARA560MJA0G+R01 | Chemi-Con | Electronic Component RoHS : Compliant | 500 | |||
| CY7C63001APC | Cypress Semiconductor | UNIVERSAL SERIAL BUS MICROCONTROLLER RISC Microcontroller, 8-Bit, OTPROM, 12MHz, CMOS, PDIP20 RoHS : Not Compliant | 33 | |||
 Interstate Connecting Components | CLT25N-C630 | Panduit Corp | CORR. LOOM TUBING SLIT, .25 (6.4MM) X 1 |
| 6 | |
| 55PC6309-10-9-9-9CS297 | TE Connectivity | 55PC6309-10-9-9-9CS2970 | 0 | |||
| 55PC6306-14-3/6/9-4CS3 | TE Connectivity | 55PC6306-14-3/6/9-4CS3362 | 0 | |||
 NexGen Digital | PIC16C63-04/SP | Microchip Technology Inc | RoHS : Compliant | 495 | ||
| FDC6306P | Fairchild Semiconductor Corporation | RoHS : Compliant | 49 | |||
 PEI Genesis | KC630S | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
 PUI | TSC-630MA | 3,947 | ||||
| MSC-630MA | 2,115 | |||||
| FSC-630MA | 108 | |||||
| FSC-630MA-BX | 40 | |||||
 Richardson RFPD | HMC6300BG46 | Analog Devices Inc | RF Transmitter AM/FM/FSK/MSK/OOK 65-Pin WLBGA Tray RoHS : Compliant |
| 0 | |
| DC630A | Analog Devices Inc | LT3469ETS8 Demonstration Circuit RoHS : Compliant |
| 0 | ||
| EV1HMC6301BG46 | Analog Devices Inc | HMC6301 RF Transceiver Evaluation Board RoHS : Compliant |
| 0 | ||
| HMC630LP3E | Analog Devices Inc | Vector Mod 1GHz 16-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
SC630ULTRT | Semtech Corporation | Charge Pump STPUP/STPDN 3.3V 400mA 8-Pin MLPD-UT E RoHS : Not Compliant |
| 0 | ||
| 422C-630UMB-CKP | Wakefield-Vette | WEDGELOCKS RoHS : Compliant | 0 | |||
| SC630AULTRT | Semtech Corporation | Charge Pump STPUP 3.3V 300mA 8-Pin MLPD-UT EP T/R RoHS : Not Compliant |
| 0 | ||
| EV1HMC6300BG46 | Analog Devices Inc | HMC6300 RF Transceiver Evaluation Board RoHS : Compliant |
| 0 | ||
| 117198-HMC630LP3 | Analog Devices Inc | HMC630LP3/HMC630LP3E RF IC Evaluation Board RoHS : Compliant |
| 0 | ||
| HMC6301BG46 | Analog Devices Inc | RF Receiver AM/FM/FSK/MSK/OOK 75-Pin WLBGA Tray RoHS : Compliant |
| 0 | ||
 Rutronik | MKP1847C630255Y5 | Vishay Intertechnologies | FP 30uF 250Vac 10% P52,5 MKP RoHS : Compliant |
| 45 | |
 Chip 1 Exchange | FDC6305N | INSTOCK | 24,564 | |||
| FDC6301N | INSTOCK | 2,396 | ||||
| CY7C6300A-SCT | Cypress Semiconductor | INSTOCK | 1,979 | |||
| FDC6306P | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 216 | |||
| PIC16LC63-04/SO | INSTOCK | 81 | ||||
CY7C63001A-PC | Cypress Semiconductor | INSTOCK RoHS : Not Compliant | 5 | |||
 Avnet Abacus | EC6305-000 | TE Connectivity | (Alt: EC6305-000) RoHS : Compliant | 0 | ||
| EC6309-000 | TE Connectivity | (Alt: EC6309-000) RoHS : Compliant | 0 | |||
| EC6301-000 | TE Connectivity | (Alt: EC6301-000) RoHS : Compliant | 0 | |||
| EC6303-000 | TE Connectivity | (Alt: EC6303-000) RoHS : Compliant | 0 | |||
| EC6307-000 | TE Connectivity | (Alt: EC6307-000) RoHS : Compliant | 0 | |||
| EC6306-000 | TE Connectivity | (Alt: EC6306-000) RoHS : Compliant | 0 | |||
| 0651C6300-11 | Bel Fuse | (Alt: 0651C6300-11) RoHS : Compliant | 0 | |||
| 0652C6300-11 | Bel Fuse | (Alt: 0652C6300-11) RoHS : Compliant | 0 | |||
| B84143C 630S250 | TDK Corporation | 3LINE FILTER 630A 305530V (Alt: B84143C0630S250) RoHS : Compliant | 0 | |||
| B84143C 630S251 | TDK Corporation | 3LINE FILTER 630A 440760V (Alt: B84143C0630S251) RoHS : Compliant | 0 | |||
| MKP1847C630255Y5 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 4 Pin 30 uF 10 Through Hole 250 V 500 V (Alt: MKP1847C630255Y5) RoHS : Compliant | 0 | |||
| MKP1848C63010JY5 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 4 Pin 30 uF 5 Through Hole 1 kV (Alt: MKP1848C63010JY5) RoHS : Compliant | 0 | |||
| MKP1848C63090JP5 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 4 Pin 30 uF 5 Through Hole 900 V (Alt: MKP1848C63090JP5) RoHS : Compliant | 0 | |||
| TP3A225M010C6300AS | Vishay Intertechnologies | Surface Mount Tantalum Capacitor 22 uF 10 V 1206 3216 Metric 20 63 ohm 110 mA - Tape and Reel (Alt: TP3A225M010C6300AS) RoHS : Compliant | 0 | |||
| TP3A225K010C6300AS | Vishay Intertechnologies | - Tape and Reel (Alt: TP3A225K010C6300AS) RoHS : Compliant | 0 | |||
Avnet Asia | S1C63008D04M000 | Epson Electronics America Inc | (Alt: S1C63008D04M000) RoHS : Compliant | 0 | ||
| FDC6301N | onsemi | (Alt: FDC6301N) RoHS : Compliant | 0 | |||
| FDC6305N | onsemi | (Alt: FDC6305N) RoHS : Compliant | 0 | |||
| FDC6306P | onsemi | (Alt: FDC6306P) RoHS : Compliant | 0 | |||
 Avnet Silica | FDC6301N | onsemi | Dual MOSFET N Channel 25 V 25 V 220 mA 220 mA 4 ohm (Alt: FDC6301N) RoHS : Compliant | 3,000 | ||
| MFRC63003HNE | NXP Semiconductors | RFID Read Write 1356MHz 8KB Memory 25V to 55V Supply HVQFN32 (Alt: MFRC63003HNE) RoHS : Compliant | 980 | |||
| FDC6303N | onsemi | Dual MOSFET N Channel 25 V 680 mA 045 ohm (Alt: FDC6303N) RoHS : Compliant | 0 | |||
| SC630ULTRT | Semtech Corporation | Charge Pump STPUPSTPDN 33V 400mA 8Pin MLPDUT EP TR (Alt: SC630ULTRT) RoHS : Compliant | 0 | |||
| XC6123C630ER-G | Torex Semiconductor LTD | - Tape and Reel (Alt: XC6123C630ER-G) RoHS : Compliant | 0 | |||
| PIC16C63-04/SP | Microchip Technology Inc | (Alt: PIC16C63-04/SP) RoHS : Compliant | 0 | |||
PIC16C63-04/SO | Microchip Technology Inc | (Alt: PIC16C63-04/SO) RoHS : Compliant | 0 | |||
| PIC16C63-04E/SO | Microchip Technology Inc | (Alt: PIC16C63-04E/SO) RoHS : Compliant | 0 | |||
| MFRC63002HN,151 | NXP Semiconductors | MultiProtocol NFC Frontend IC I2C SPI UART 32 Pins HVQFN ISOIEC 14443 Type A MIFARE (Alt: MFRC63002HN,151) RoHS : Compliant | 0 | |||
| PIC16C63-04I/SO | Microchip Technology Inc | (Alt: PIC16C63-04I/SO) RoHS : Compliant | 0 | |||
| L2C6-30902L02C0600 | Lumileds | LUXEON CS CoB Gen 2 Warmwhite CoB 90 CRI CCT 3000K CRI 90 (Alt: L2C6-30902L02C0600) RoHS : Compliant | 0 | |||
| L2C6-30902L04A0900 | Lumileds | LED COB Warm White 3000K 900mA Tray (Alt: L2C6-30902L04A0900) RoHS : Compliant | 0 | |||
| L2C6-30902L08D150K | Lumileds | LUXEON CS CoB Gen 2 HE Warmwhite CoB 90 CRI CCT 3000K CRI 90 (Alt: L2C6-30902L08D150K) RoHS : Compliant | 0 | |||
| L2C6-30902L06C1300 | Lumileds | LUXEON CS CoB Gen 2 Warmwhite CoB 90 CRI CCT 3000K CRI 90 (Alt: L2C6-30902L06C1300) RoHS : Compliant | 0 | |||
| L2C6-30902L04C0900 | Lumileds | (Alt: L2C6-30902L04C0900) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | TMC6300-BOB | Analog Devices Inc | BLDC Driver Breakout Board for TMC6300 |
| 1 | |
 Component Electronics, Inc | BK/GDC-630MA | Eaton Bussmann | IN STOCK SHIP TODAY |
| 650 | |
| GDC-630MA | Eaton Bussmann | IN STOCK SHIP TODAY |
| 650 | ||
| C630-5260-X900 | FUJITSU Component Ltd | IN STOCK SHIP TODAY | 500 | |||
| C630-5260-X033 | FUJITSU Component Ltd | IN STOCK SHIP TODAY | 500 | |||
| C630-5260-X035 | FUJITSU Component Ltd | IN STOCK SHIP TODAY | 500 | |||
| C630-5260-X032 | FUJITSU Component Ltd | IN STOCK SHIP TODAY | 500 | |||
| C630-5260-X031 | FUJITSU Component Ltd | IN STOCK SHIP TODAY | 500 | |||
| C630C104K5X5CA | KEMET Corporation | IN STOCK SHIP TODAY | 285 | |||
| FDC6301N | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 255 | ||
| C630-5030-T532 | IN STOCK SHIP TODAY | 200 | ||||
| PIC16LC63-04I/SP | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
CY7C63001C-SXC | Cypress Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | C6-30 | Southco |
| 148 | ||
| CLT50N-C630 | Panduit Corp | CORR. LOOM TUBING SLIT, .50 (12.7MM) X RoHS : Compliant |
| 2 | ||
| VCC-63048 | Essentra Components | ClampAdjScrw MntSteel/ Blk Vinyl Clamp Adj Steel/ Blk Vinyl | 0 | |||
 EBV Elektronik | MFRC63002HN,151 | NXP Semiconductors | MultiProtocol NFC Frontend IC I2C SPI UART 32 Pins HVQFN ISOIEC 14443 Type A MIFARE (Alt: MFRC63002HN,151) RoHS : Compliant | 10,290 | ||
| FDC6303N | onsemi | Dual MOSFET N Channel 25 V 680 mA 045 ohm (Alt: FDC6303N) RoHS : Compliant | 0 | |||
| FDC6301N | onsemi | Dual MOSFET N Channel 25 V 25 V 220 mA 220 mA 4 ohm (Alt: FDC6301N) RoHS : Compliant | 0 | |||
| FDC6305N | onsemi | Dual NChannel PowerTrench MOSFET 25V Specified 20V 27A 80mO (Alt: FDC6305N) RoHS : Compliant | 0 | |||
| FDC6306P | onsemi | Dual PChannel PowerTrench MOSFET 25V Specified 20V 19A 170mO (Alt: FDC6306P) RoHS : Compliant | 0 | |||
| MFRC63003HNY | NXP Semiconductors | MultiProtocol NFC Frontend IC I2C SPI UART 32 Pins HVQFN ISOIEC 14443 Type A MIFARE (Alt: MFRC63003HNY) RoHS : Compliant | 0 | |||
| MFRC63003HNE | NXP Semiconductors | RFID Read Write 1356MHz 8KB Memory 25V to 55V Supply HVQFN32 (Alt: MFRC63003HNE) RoHS : Compliant | 0 | |||
| PIC16C63-04/SP | Microchip Technology Inc | (Alt: PIC16C63-04/SP) RoHS : Compliant | 0 | |||
| PIC16C63-04/SO | Microchip Technology Inc | (Alt: PIC16C63-04/SO) RoHS : Compliant | 0 | |||
| PIC16C63-04E/SO | Microchip Technology Inc | (Alt: PIC16C63-04E/SO) RoHS : Compliant | 0 | |||
| MFRC63002HN,157 | NXP Semiconductors | MultiProtocol NFC Frontend IC I2C SPI UART 32 Pins HVQFN ISOIEC 14443 Type A MIFARE (Alt: MFRC63002HN,157) RoHS : Compliant | 0 | |||
| MFRC63002HN,118 | NXP Semiconductors | MultiProtocol NFC Frontend IC I2C SPI UART 32 Pins HVQFN ISOIEC 14443 Type A MIFARE (Alt: MFRC63002HN,118) RoHS : Compliant | 0 | |||
 Flip Electronics | FDC6302P | onsemi | Stock, Ship Today RoHS : Compliant |
| 327,000 | |
| FDC6304P | onsemi | Stock, Ship Today RoHS : Compliant |
| 93,000 | ||
| MFRC63001HN,518 | NXP Semiconductors | Stock | 6,000 | |||
| SMC6300A | onsemi | Stock, Ship Today |
| 5,000 | ||
| FDC6303N | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,237 | ||
 Master Electronics | NPC-6303 | Quest Technology International Inc | Cable Assembly Patch Cord 0.914m 24AWG 8 POS RJ-45 to 8 POS RJ-45 PL-PL RoHS : Compliant |
| 97 | |
| BC6-30-10-F01 | ABB Low Voltage Products and Systems | ABB-CONTACTORS OLS MMPS - MINIATURE (6-7) 3-POLE RoHS : Not Compliant |
| 7 | ||
| BC6-30-10-01 | ABB Low Voltage Products and Systems | Miniature Contactor - 24 VDC Coil - 6.8 A at 3-Phase - 12 A at 1-Phase. RoHS : Not Compliant |
| 4 | ||
| F204AC-63/0.1 | ABB Low Voltage Products and Systems | The F204AC-63/0.1 is a 4-pole Type AC residual current device (RCD) that provides protection against AC earth leakage currents. RoHS : Compliant |
| 2 | ||
| DSC6301HL1FB-020.0000 | Microchip Technology Inc | MEMS OSC LVCMOS 20MHz 50PPM 1.8-3.3V -40 to 105C 1.6 x RoHS : Compliant |
| 0 | ||
| DSC6302JI1AB-033.3000T | Microchip Technology Inc | MEMS OSC LVCMOS 33.3MHz 50ppm 1.8-3.3V -40 to 85C 2.5x RoHS : Compliant |
| 0 | ||
| EKYC630ELL331MJ20S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| DSC6301BL1BB-050.0000 | Microchip Technology Inc | MEMS OSC LVCMOS 50MHz 50PPM 1.8-3.3V -40 to 105C 5.0x3 RoHS : Compliant |
| 0 | ||
| DSC6301JL1LB-001.0000T | Microchip Technology Inc | MEMS OSC LVCMOS 1MHz 50PPM 1.8-3.3V -40 to 105C 2.5 x RoHS : Compliant |
| 0 | ||
| 55PC6306-12-3/6/9-9 | TE Connectivity | 55PC6306-12-3/6/9-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC6309-10-9-9-9CS2970 | TE Connectivity | 55PC6309-10-9-9-9CS2970 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EKYC630ELL162MM25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| DSC6301HI2DB-012.0000 | Microchip Technology Inc | MEMS OSC LVCMOS 12MHz 25PPM 1.8-3.3V -40 to 85C 1.6 x RoHS : Compliant |
| 0 | ||
| DSC6301JI2AB-002.0000 | Microchip Technology Inc | MEMS OSC LVCMOS 2MHz 25PPM 1.8-3.3V -40 to 85C 2.5 x 2 RoHS : Compliant |
| 0 | ||
| DSC6301JI2AB-002.0000T | Microchip Technology Inc | MEMS OSC LVCMOS 2MHz 25PPM 1.8-3.3V -40 to 85C 2.5 x 2 RoHS : Compliant |
| 0 | ||
 Neutron USA | HMC630LP3E | Analog Devices Inc | Modulator / Demodulator HBT Vector Modulator SMT, 700 - 1000 MHz RoHS : Compliant |
| 11 | |
| BC6-30-10-F01 | ABB Low Voltage Products and Systems | 3P CONTR.24VDC FLAT PIN 1-NO |
| 7 | ||
| F204AC-63/0.1 | ABB Low Voltage Products and Systems | RCD F200 AC 4P 63A 100MA |
| 3 | ||
| BC6-30-01-F01 | ABB Low Voltage Products and Systems | 3P CONTR.24VDC FLAT PIN 1-NC |
| 1 | ||
| BC6-30-10-01 | ABB Low Voltage Products and Systems | Contactor; Miniature; 24VDC Coil; 6.8A; 3-Pole; 1NO Aux.; BC Series |
| 0 | ||
| IC630EG0WH | International Components Corporation | ICC IC630EG0WH Coaxial Faceplate |
| 0 | ||
| IC630EB0WH | International Components Corporation | ICC IC630EB0WH Single Gang Blank Faceplate |
| 0 | ||
| F204AC-63/0.3 | ABB Low Voltage Products and Systems | Residual Current Circuit Breaker, RCD F200 4P 63A, Residual: 300MA |
| 0 | ||
| VBC6-30-01-01 | ABB Low Voltage Products and Systems | VBC6 3 Pole Contactor; 20 A; 4 kW; 24 Vdc Coil |
| 0 | ||
| VBC6-30-01-P01 | ABB Low Voltage Products and Systems | 3P MINI CONTR 24VDC 1NC SP |
| 0 | ||
| BC6-30-01-01 | ABB Low Voltage Products and Systems | BC6-30 3 Pole Contactor; 9 A; 4 kW; 24 V dc Coil |
| 0 | ||
| DDA202AC-63/.03 | ABB Low Voltage Products and Systems | Residual Current Device Block, 230VAC 63A, 2CSB202001R1630 |
| 0 | ||
| VBC6-30-10-P07 | ABB Low Voltage Products and Systems | Mini Rev.Contactor, 3P 3NO, Aux: 1NO, control: 12VDC, Main: 690VAC 220VDC |
| 0 | ||
| BC6-30-10-1.4 | ABB Low Voltage Products and Systems | 3P INTERFACE CONTR 24VDC 1NO |
| 0 | ||
| BC6-30-10-P01 | ABB Low Voltage Products and Systems | Mini Contactor, 3P, M: 3NO, Aux: 1NO 0NC, 24Vdc Coil, AC1: (220/240V) 40°C 12A, GJL1213009R0101 |
| 0 | ||
 Pasternack Enterprises US | PE3C6308 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Push-On SMP Female to SMP Female Right Angle Cable Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to SMP female right angle cable using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Push-on SMP female to SMP female right angle cable using PE-SR405FL coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C6308 can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C6308 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6308 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to SMP female right angle cable using PE-SR405FL coax. | 155 | ||
| PE3C6305-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: PE-C100, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Black FAKRA Plug to FAKRA Jack Low Loss Cable 12 Inch Length Using PE-C100 Coax., Radio frequency assembly black FAKRA plug to FAKRA jack low loss cable 12 inch length using PE-C100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Black FAKRA plug to FAKRA jack low loss cable 12 inch length using PE-C100 coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C6305-12 can also be known as a low loss FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C6305-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6305-12 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to FAKRA jack low loss cable 12 inch length using PE-C100 coax. |
| 127 | ||
| PE3C6305-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: PE-C100, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Black FAKRA Plug to FAKRA Jack Low Loss Cable 36 Inch Length Using PE-C100 Coax., Radio frequency assembly black FAKRA plug to FAKRA jack low loss cable 36 inch length using PE-C100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Black FAKRA plug to FAKRA jack low loss cable 36 inch length using PE-C100 coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C6305-36 can also be known as a low loss FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C6305-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6305-36 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to FAKRA jack low loss cable 36 inch length using PE-C100 coax. |
| 127 | ||
| PE3C6308-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Push-On SMP Female to SMP Female Right Angle Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Push-on SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C6308-36 can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C6308-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6308-36 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax. |
| 31 | ||
| PE3C6309 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Full Detent SMP Male Bulkhead to SMP Female Right Angle Cable Using PE-SR405FL Coax., Radio frequency assembly full detent SMP male bulkhead to SMP female right angle cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Full detent SMP male bulkhead to SMP female right angle cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. This SMP to SMP cable is a male to female coax assembly, PE3C6309, can also be known as a SMP plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP plug to SMP jack cable assembly PE3C6309 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMP male bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6309 can also be used in the other direction and will be right angle SMP female to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this full detent SMP male bulkhead to SMP female right angle cable using PE-SR405FL coax. | 0 | |||
| PE3C6302 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Male Cable Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to SMA male cable using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMA male cable using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and SMA cable connection on the other. Our 2.92mm to SMA cable assembly has male gender on end 1 and male on end 2. PE3C6302 can also be known as a 2.92mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to SMA plug cable assembly PE3C6302 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3C6302 RF cable are available on our downloadable PDF datasheet.PE3C6302 can also be used in the other direction and will be SMA male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMA cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. | 0 | |||
| PE3C6300-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to 2.92mm Male Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C6300-36 can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.3:1. 2.92mm plug to 2.92mm plug cable assembly PE3C6300-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6300-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to 2.92mm Male Cable 6 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 6 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable 6 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C6300-6 can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.3:1. 2.92mm plug to 2.92mm plug cable assembly PE3C6300-6 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6301 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. BNC Male to UHF Female Cable Using RG223 Coax., Radio frequency assembly BNC male to UHF female cable using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to UHF female cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and UHF cable connection on the other. Our BNC to UHF cable assemblies have a male gender on end 1 and female on end 2. This BNC to UHF cable is a male to female coax assembly, PE3C6301, can also be known as a BNC plug to UHF jack cable assembly and will be shipped same-day as it is purchased. BNC plug to UHF jack cable assembly PE3C6301 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6301 can also be used in the other direction and will be UHF female to BNC male cable assembly if the opposite connectivity is required. BNC plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to UHF cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to UHF female cable using RG223 coax. | 0 | |||
| PE3C6301/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. BNC Male to UHF Female Cable Using RG223 Coax with HeatShrink., Radio frequency assembly BNC male to UHF female cable using RG223 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to UHF female cable using RG223 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and UHF cable connection on the other. Our BNC to UHF cable assemblies have a male gender on end 1 and female on end 2. This BNC to UHF cable is a male to female coax assembly, PE3C6301/HS, can also be known as a BNC plug to UHF jack cable assembly and will be shipped same-day as it is purchased. BNC plug to UHF jack cable assembly PE3C6301/HS is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6301/HS can also be used in the other direction and will be UHF female to BNC male cable assembly if the opposite connectivity is required. BNC plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to UHF cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to UHF female cable using RG223 coax with heatshrink. | 0 | |||
| PE3C6302-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to SMA Male Cable 12 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to SMA male cable 12 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMA male cable 12 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and SMA cable connection on the other. Our 2.92mm to SMA cable assembly has male gender on end 1 and male on end 2. PE3C6302-12 can also be known as a 2.92mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to SMA plug cable assembly PE3C6302-12 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3C6302-12 RF cable are available on our downloadable PDF datasheet.PE3C6302-12 can also be used in the other direction and will be SMA male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMA cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6306-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SSMC Plug to SMA Male Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly SSMC plug to SMA male cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMC plug to SMA male cable 72 inch length using RG316 coax, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and SMA cable connection on the other. Our SSMC to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C6306-72 can also be known as a SSMC male to SMA plug cable assembly and will be shipped same-day as it is purchased. SSMC male to SMA plug cable assembly PE3C6306-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6306-72 can also be used in the other direction and will be SMA male to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMA cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SMA male cable 72 inch length using RG316 coax. |
| 0 | ||
| PE3C6302-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to SMA Male Cable 24 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to SMA male cable 24 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMA male cable 24 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and SMA cable connection on the other. Our 2.92mm to SMA cable assembly has male gender on end 1 and male on end 2. PE3C6302-24 can also be known as a 2.92mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to SMA plug cable assembly PE3C6302-24 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3C6302-24 RF cable are available on our downloadable PDF datasheet.PE3C6302-24 can also be used in the other direction and will be SMA male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMA cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6307 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Right Angle Cable Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMP female right angle cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMP female right angle cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMP cable is a male to female coax assembly, PE3C6307, can also be known as a SMA plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMP jack cable assembly PE3C6307 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6307 can also be used in the other direction and will be right angle SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMP female right angle cable using PE-SR405FL coax. | 0 | |||
| PE3C6300-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to 2.92mm Male Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable 18 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C6300-18 can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.3:1. 2.92mm plug to 2.92mm plug cable assembly PE3C6300-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
 Vyrian | TMC6300-LA-T | Analog Devices Inc | Brushless DC Motor Controller RoHS : Compliant | 10,919 | ||
| PDAC63004RTET | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 20us Settling Time, PQCC16 RoHS : Not Compliant | 8,850 | |||
| SN74HC630JP4 | Texas Instruments | Error Detection And Correction Circuit, CMOS, CDIP28 RoHS : Not Compliant | 8,564 | |||
| SN74HC630NP1 | Texas Instruments | Error Detection And Correction Circuit, CMOS, PDIP28 RoHS : Not Compliant | 8,353 | |||
| SN74HC630J | Texas Instruments | Error Detection And Correction Circuit, CMOS, CDIP28 RoHS : Not Compliant | 7,610 | |||
| TMC6300-LA | Analog Devices Inc | Brushless DC Motor Controller RoHS : Compliant | 7,534 | |||
| SNJ54HC630J | Texas Instruments | Error Detection And Correction Circuit, CMOS, CDIP28 RoHS : Not Compliant | 7,093 | |||
| PIC16C63-04E/SO | Microchip Technology Inc | RISC Microcontroller, 8-Bit, OTPROM, PIC16 CPU, 4MHz, CMOS, PDSO28 RoHS : Compliant | 5,672 | |||
| SN74HC630J4 | Texas Instruments | Error Detection And Correction Circuit, CMOS, CDIP28 RoHS : Not Compliant | 5,538 | |||
| SN54HC630J | Texas Instruments | Error Detection And Correction Circuit, CMOS, CDIP28 RoHS : Not Compliant | 5,304 | |||
| SN74HC630N1 | Texas Instruments | Error Detection And Correction Circuit, CMOS, PDIP28 RoHS : Not Compliant | 5,010 | |||
| SN74HC630N | Texas Instruments | Error Detection And Correction Circuit, CMOS, PDIP28 RoHS : Not Compliant | 4,772 | |||
| SN74HC630NP3 | Texas Instruments | Error Detection And Correction Circuit, CMOS, PDIP28 RoHS : Not Compliant | 4,427 | |||
| SN74HC630N3 | Texas Instruments | Error Detection And Correction Circuit, CMOS, PDIP28 RoHS : Not Compliant | 3,896 | |||
| MFRC63002HN | NXP Semiconductors | Telecom Circuit, 1-Func, PQCC32 RoHS : Compliant | 491 | |||
 Win Source Electronics | FDC6301N | Fairchild Semiconductor Corporation | MOSFET 2N-CH 25V 0.22A SSOT6 / Trans MOSFET N-CH 25V 0.22A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 98,000 | |
| MFRC63001HN | Nexperia |
| 96,824 | |||
| FDC6305N | Fairchild Semiconductor Corporation | MOSFET 2N-CH 20V 2.7A SSOT6 RoHS : Compliant |
| 42,000 | ||
| FDC6306P | Fairchild Semiconductor Corporation | MOSFET 2P-CH 20V 1.9A SSOT6 / Trans MOSFET P-CH 20V 1.9A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 36,000 | ||
| FDC6301N-NL | Fairchild Semiconductor Corporation |
| 35,600 | |||
| FDC6306P-NL | onsemi |
| 32,820 | |||
| QMC6308 | QST Corporation | WLCSP-4 Linear, Compass (ICs) RoHS RoHS : Unknown |
| 27,612 | ||
| FDC6303N | Fairchild Semiconductor Corporation | Trans MOSFET N-CH 25V 0.68A 6-Pin TSOT-23 T/R / MOSFET 2N-CH 25V 0.68A SSOT6 RoHS : Compliant |
| 20,960 | ||
| MFRC63002HN | Nexperia | Contactless reader IC |
| 12,035 | ||
| MFRC63003HNE | Nexperia | IC RFID TRANSP 13.56MHZ 32HVQFN |
| 7,600 | ||
| MFRC63003HNY | Nexperia | IC RFID TRANSP 13.56MHZ 32HVQFN / RFID Transponder IC 13.56MHz ISO 14443, MIFARE I²C, SPI, UART 2.5V ~ 5.5V 32-VFQFN Exposed Pad |
| 200 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand