C531 Price, Distributor, Stock

Streamlined looks and easy operation make this compression latch an ideal choice for highly visible installations requiring a secure sealed fit. Compressive action pulls door tight without rubbing action or wear on pawl or frame.

1 : $44.58
100 : $27.62

C5-31-15

Southco

1 : $44.58
25 : $34.8

C5-31-45

Southco

1 : $44.58
6 : $44.58

Southco

Southco

Southco

Southco

Southco

Southco

Southco

Southco

Southco

Southco

EBV Elektronik

STM32C531CCU6

STMicroelectronics

STM32C (Alt: STM32C531CCU6)
RoHS : Compliant

STM32C531FBP6

STMicroelectronics

STM32C (Alt: STM32C531FBP6)
RoHS : Compliant

STM32C531CBU6

STMicroelectronics

STM32C (Alt: STM32C531CBU6)
RoHS : Compliant

MIC5317-3.3YD5-T5

Microchip Technology Inc

SINGLE HIGH PERFORMANCE 150MA LDO (Alt: MIC5317-3.3YD5-T5)
RoHS : Compliant

MIC5317-3.0YM5-TR

Microchip Technology Inc

LDO Regulator Pos 3V 015A 5Pin SOT23 TR (Alt: MIC5317-3.0YM5-TR)
RoHS : Compliant

MIC5316-GGCYMT-TR

Microchip Technology Inc

(Alt: MIC5316-GGCYMT-TR)
RoHS : Compliant

MIC5317-1.0YM5-TR

Microchip Technology Inc

LDO Regulator Pos 1V 015A 5Pin SOT23 TR (Alt: MIC5317-1.0YM5-TR)
RoHS : Compliant

MIC5317-1.0YD5-T5

Microchip Technology Inc

LDO Regulator Pos 1V 015A 5Pin SOT23 (Alt: MIC5317-1.0YD5-T5)
RoHS : Compliant

MIC5319-3.3YML-TR

Microchip Technology Inc

500MA UCAP ULTRALOW DROPOUT HIGH PSRR LDO REGULATOR (Alt: MIC5319-3.3YML-TR)
RoHS : Compliant

MIC5317-1.0YD5-TR

Microchip Technology Inc

(Alt: MIC5317-1.0YD5-TR)
RoHS : Compliant

MIC5317-1.8YD5-T5

Microchip Technology Inc

SINGLE HIGH PERFORMANCE 150MA LDO (Alt: MIC5317-1.8YD5-T5)
RoHS : Compliant

MIC5317-3.3YM5-T5

Microchip Technology Inc

SINGLE HIGH PERFORMANCE 150MA LDO (Alt: MIC5317-3.3YM5-T5)
RoHS : Compliant

MIC5319-2.8YD5-TR

Microchip Technology Inc

(Alt: MIC5319-2.8YD5-TR)
RoHS : Compliant

MIC5317-2.8YM5-TR

Microchip Technology Inc

LDO Regulator Pos 28V 015A 5Pin SOT23 TR (Alt: MIC5317-2.8YM5-TR)
RoHS : Compliant

MIC5317-2.8YD5-T5

Microchip Technology Inc

(Alt: MIC5317-2.8YD5-T5)
RoHS : Compliant

Master Electronics

VVPZC53-1HX

Carling Technologies

V-SERIES ROCKER SWITCH
RoHS : Compliant

100 : $7.18
75 : $7.33
50 : $7.85
25 : $10.47

MIC5310-OGYML-TR

Microchip Technology Inc

Dual 150mA LDO
RoHS : Compliant

5,000 : $0.658
3,750 : $0.671
2,500 : $0.954
1,250 : $1.802

MIC5310-SOYML-TR

Microchip Technology Inc

Dual 150mA LDO
RoHS : Compliant

5,000 : $0.658
3,750 : $0.671
2,500 : $0.954
1,250 : $1.802

MIC5318-4.6YD5-TR

Microchip Technology Inc

6Vin Single 300mA ULDO
RoHS : Compliant

102,000 : $0.1205
51,000 : $0.122
27,000 : $0.1235
12,000 : $0.1266
9,000 : $0.1282
6,000 : $0.1316
3,000 : $0.1351

MIC5319-2.7YD5-TR

Microchip Technology Inc

500mA uCap Ultra-Low Dropout High PSRR LDO Regulator
RoHS : Compliant

3,000 : $1.54
2,250 : $1.57
1,500 : $2.23
750 : $4.22

MIC5310-GGYML-TR

Microchip Technology Inc

Dual 150mA LDO
RoHS : Compliant

5,000 : $0.658
3,750 : $0.671
2,500 : $0.954
1,250 : $1.802

MIC5310-KGYML-TR

Microchip Technology Inc

Dual 150mA LDO
RoHS : Compliant

5,000 : $0.658
3,750 : $0.671
2,500 : $0.954
1,250 : $1.802

MIC5317-3.0YMT-TZ

Microchip Technology Inc

LDO Regulator Pos 3V 0.15A 4-Pin TDFN EP T/R
RoHS : Compliant

10,000 : $0.096
7,500 : $0.098
5,000 : $0.105
2,500 : $0.14

MIC5318-2.8YMT-TR

Microchip Technology Inc

LDO Regulator Pos 2.8V 0.3A 6-Pin TDFN EP T/R
RoHS : Compliant

5,000 : $0.1372
3,750 : $0.14
2,500 : $0.15
1,250 : $0.2

MIC5318-2.6YMT-TR

Microchip Technology Inc

6Vin Single 300mA ULDO
RoHS : Compliant

5,000 : $0.1372
3,750 : $0.14
2,500 : $0.15
1,250 : $0.2

GSC5312

Thomas & Betts

RoHS : Compliant

15,000 : $0.823
10,000 : $0.825
7,500 : $0.827
5,000 : $0.83
2,500 : $0.832
1,000 : $0.859
300 : $0.947
100 : $1.12

MIC5317-1.5YD5-TR

Microchip Technology Inc

LDO Regulator Pos 1.5V 0.15A 5-Pin TSOT-23 T/R
RoHS : Compliant

102,000 : $0.1687
51,000 : $0.1707
27,000 : $0.1728
12,000 : $0.1768
9,000 : $0.1772
6,000 : $0.1795
3,000 : $0.1892

MIC5317-3.0YM5-TR

Microchip Technology Inc

Single High Performance 150mA LDO
RoHS : Compliant

150,000 : $0.0843
102,000 : $0.0854
51,000 : $0.0864
27,000 : $0.0886
12,000 : $0.0897
9,000 : $0.0921
6,000 : $0.0946
3,000 : $0.0959

MIC5318-3.0YD5-TR

Microchip Technology Inc

6Vin Single 300mA ULDO
RoHS : Compliant

102,000 : $0.1205
51,000 : $0.122
27,000 : $0.1235
12,000 : $0.1266
9,000 : $0.1282
6,000 : $0.1316
3,000 : $0.1351

VGB2GJDC-AAC53-100

Carling Technologies

V-SERIES ROCKER SWITCH
RoHS : Compliant

100 : $18.43
75 : $18.81
50 : $23.76
25 : $38.6

Pasternack Enterprises US

PE3C5318

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. MMCX Plug to TNC Female Bulkhead Cable Using PE-SR405FL Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to TNC female bulkhead cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assembly has plug gender on end 1 and female on end 2. PE3C5318 can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to TNC jack cable assembly PE3C5318 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5318 RF cable are available on our downloadable PDF datasheet.PE3C5318 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

5,020

PE3C5318-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. MMCX Plug to TNC Female Bulkhead Cable 6 Inch Length Using PE-SR405FL Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable 6 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to TNC female bulkhead cable 6 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assembly has plug gender on end 1 and female on end 2. PE3C5318-6 can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to TNC jack cable assembly PE3C5318-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5318-6 RF cable are available on our downloadable PDF datasheet.PE3C5318-6 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

1 : $106.99
25 : $101.64
50 : $96.29
100 : $92.01

1,381

PE3C5318-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. MMCX Plug to TNC Female Bulkhead Cable 9 Inch Length Using PE-SR405FL Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable 9 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to TNC female bulkhead cable 9 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assembly has plug gender on end 1 and female on end 2. PE3C5318-9 can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to TNC jack cable assembly PE3C5318-9 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5318-9 RF cable are available on our downloadable PDF datasheet.PE3C5318-9 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

1,381

PE3C5318-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MMCX Plug to TNC Female Bulkhead Cable 24 Inch Length Using PE-SR405FL Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable 24 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to TNC female bulkhead cable 24 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assembly has plug gender on end 1 and female on end 2. PE3C5318-24 can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to TNC jack cable assembly PE3C5318-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5318-24 RF cable are available on our downloadable PDF datasheet.PE3C5318-24 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

616

PE3C5318-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug to TNC Female Bulkhead Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable 36 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to TNC female bulkhead cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assembly has plug gender on end 1 and female on end 2. PE3C5318-36 can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to TNC jack cable assembly PE3C5318-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5318-36 RF cable are available on our downloadable PDF datasheet.PE3C5318-36 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

410

PE3C5313

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm. SMA Male to Trimmed Lead Cable Using LMR-200-UF Coax., Radio frequency assembly SMA male to trimmed lead cable using LMR-200-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to trimmed lead cable using LMR-200-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a male to sexless coax assembly, PE3C5313, can also be known as a SMA plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA plug to trimmed lead sexless cable assembly PE3C5313 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5313 can also be used in the other direction and will be trimmed lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to trimmed lead cable using LMR-200-UF coax.

PE3C5315

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 1.85mm Male to N Male Cable Using RG405 Coax., Radio frequency assembly 1.85mm male to N male cable using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to N male cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and type N cable connection on the other. Our 1.85mm to N type cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to type N cable is a male to male coax assembly, PE3C5315, can also be known as a 1.85mm plug to type N plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to N type plug cable assembly PE3C5315 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency 1.85mm male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5315 can also be used in the other direction and will be type N male to 1.85mm male cable assembly if the opposite connectivity is required. 1.85mm plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to type N cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to N male cable using RG405 coax.

PE3C5316

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 1.85mm Female Bulkhead to N Male Cable Using RG405 Coax., Radio frequency assembly 1.85mm female bulkhead to N male cable using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm female bulkhead to N male cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm bulkhead cable connection on one end and type N cable connection on the other. Our 1.85mm to type N cable assemblies have a female gender on end 1 and male on end 2. This 1.85mm to type N cable is a female to male coax assembly, PE3C5316, can also be known as a 1.85mm jack to type N plug cable assembly and will be shipped same-day as it is purchased. 1.85mm jack to N type plug cable assembly PE3C5316 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency 1.85mm female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5316 can also be used in the other direction and will be type N male to 1.85mm female bulkhead cable assembly if the opposite connectivity is required. 1.85mm jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to type N cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm female bulkhead to N male cable using RG405 coax.

PE3C5317

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MMCX Plug to TNC Female Bulkhead Cable Using LMR-100 Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX plug to TNC female bulkhead cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assemblies have a plug gender on end 1 and female on end 2. This MMCX to TNC cable is a plug to female coax assembly, PE3C5317, can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. MMCX male to TNC jack cable assembly PE3C5317 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMCX plug to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5317 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to TNC female bulkhead cable using LMR-100 coax.

PE3C5314

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity SMA Male Cable Using RG402 Coax., Radio frequency assembly SMA male to reverse polarity SMA male cable using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity SMA male cable using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity SMA cable is a male to male coax assembly, PE3C5314, can also be known as a SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA plug cable assembly PE3C5314 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5314 can also be used in the other direction and will be reverse polarity SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity SMA male cable using RG402 coax.

PE3C5312

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to HN Male Cable Using RG214 Coax., Radio frequency assembly 7/16 DIN male right angle to HN male cable using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male right angle to HN male cable using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and HN cable connection on the other. Our right angle 7/16 DIN to HN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to HN cable is a male to male coax assembly, PE3C5312, can also be known as a right angle 7/16 DIN plug to HN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to HN plug cable assembly PE3C5312 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN right angle male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5312 can also be used in the other direction and will be HN male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to HN male cable using RG214 coax.

PE3C5312LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Male to 7/16 DIN Male Right Angle Cable Using RG214 Coax with HeatShrink, LF Solder. PE3C5312LF/HS is a HN male to 7/16 DIN male right angle cable using RG214 coax. This Pasternack HN male to 7/16 DIN male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. HN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5312LF/HS HN male to 7/16 DIN male right angle cable assembly is constructed with RG214 coax.

PE3C5310

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to Trimmed Lead Cable Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm F male to trimmed lead cable using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to trimmed lead cable using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and trimmed lead cable connection on the other. Our type F to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This type F to trimmed lead cable is a male to sexless coax assembly, PE3C5310, can also be known as a F type plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. Type F plug to trimmed lead sexless cable assembly PE3C5310 is built with RG179 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to trimmed lead cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type F male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5310 can also be used in the other direction and will be trimmed lead sexless to F type male cable assembly if the opposite connectivity is required. F type plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to trimmed lead cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to trimmed lead cable using 75 Ohm RG179 coax.

PE3C5311

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. MHV Male to Trimmed Lead Cable Using RG58 Coax., Radio frequency assembly MHV male to trimmed lead cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to trimmed lead cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and trimmed lead cable connection on the other. Our MHV to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This MHV to trimmed lead cable is a male to sexless coax assembly, PE3C5311, can also be known as a MHV plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. MHV plug to trimmed lead sexless cable assembly PE3C5311 is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5311 can also be used in the other direction and will be trimmed lead sexless to MHV male cable assembly if the opposite connectivity is required. MHV plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to trimmed lead cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to trimmed lead cable using RG58 coax.

PE3C5319

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to Straight Cut Lead Cable Using LMR-100 Coax., Radio frequency assembly SMB jack bulkhead to straight cut lead cable using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB jack bulkhead to straight cut lead cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to Straight Cut Lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB bulkhead cable connection on one end and Straight Cut Lead cable connection on the other. Our SMB to Straight Cut Lead cable assemblies have a jack gender on end 1 and sexless on end 2. This SMB to Straight Cut Lead cable is a jack to sexless coax assembly, PE3C5319, can also be known as a SMB female to Straight Cut Lead sexless cable assembly and will be shipped same-day as it is purchased. SMB female to Straight Cut Lead sexless cable assembly PE3C5319 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to Straight Cut Lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB jack bulkhead to Straight Cut Lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5319 can also be used in the other direction and will be Straight Cut Lead sexless to SMB jack bulkhead cable assembly if the opposite connectivity is required. SMB female bulkhead to Straight Cut Lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to Straight Cut Lead cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack bulkhead to straight cut lead cable using LMR-100 coax.