| Electronic Components Datasheet Search |
|
C31-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() GLYN GmbH & Co. KG | STC31-R1 | Sensirion | CO2 Sensor for battery-operated applications Meas | 42 | ||
![]() Richardson RFPD | LTC3113IDHD#TRPBF | Analog Devices Inc | Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step D RoHS : Compliant |
| 0 | |
| LTC3114IFE-1#TRPBF | Analog Devices Inc | Conv DC-DC 2.2V to 40V Synchronous Step Down/Step RoHS : Compliant |
| 0 | ||
| LTC3127EMSE#TRPBF | Analog Devices Inc | Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step D RoHS : Compliant |
| 0 | ||
| REC3-1205SRW/H6/A/SMD-R | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 5V 0.6A 3W Medical 17-Pin RoHS : Compliant |
| 0 | ||
| REC3-1209DRW/H2/A/SMD/CTRL | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 9V/-9V 0.165A/-0.165A 3W RoHS : Compliant |
| 0 | ||
| REC3-1209DRW/H4/A/SMD | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 9V/-9V 0.165A/-0.165A 3W RoHS : Compliant |
| 0 | ||
| REC3-1209SRW/H2/A/SMD-R | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 9V 0.33A 3W Medical 17-Pi RoHS : Compliant |
| 0 | ||
| REC3-1212SRW/H2/A/SMD-R | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 12V 0.25A 3W Medical 17-P RoHS : Compliant |
| 0 | ||
| REC3-1215DRW/H2/A/M/SMD-R | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT -15V/15V -0.1A/0.1A 3W Me RoHS : Compliant |
| 0 | ||
| REC3-1215DRW/H2/A/M/SMD/CTRL-R | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 15V/-15V 0.1A/-0.1A 3W Me RoHS : Compliant |
| 0 | ||
| REC3-1215DRW/H4/C | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT -15V/15V -0.1A/0.1A 3W Me RoHS : Compliant |
| 0 | ||
| REC3-123.3SRW/H2/A/M/SMD | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 3.3V 0.9A 3W Medical 17-P RoHS : Compliant |
| 0 | ||
| REC3-123.3SRW/H6/A/SMD/CTRL | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 3.3V 0.9A 3W Medical 18-P RoHS : Compliant |
| 0 | ||
| ELBG250EC3192AM15S | United Chemi-Con Inc | ELBG250EC3192AM15S+Q01 RoHS : Compliant | 0 | |||
| DC3103A | Analog Devices Inc | LT3942 LED Driver Demonstration Circuit RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | AM26C31IPWR(G4) | Texas Instruments | INSTOCK | 52,000 | ||
| RC31220R5% | INSTOCK | 40,000 | ||||
| R82 EC 3100 DQ70 K | Arcotronics Group | INSTOCK | 17,000 | |||
TLV320DAC3101IRHBR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 5,909 | |||
| B82496C3151G | INSTOCK | 4,852 | ||||
| S701C31S207Q | Littelfuse Inc | INSTOCK RoHS : Compliant | 3,916 | |||
| C315C470J2G5TA7303 | INSTOCK | 3,500 | ||||
| LTC3130EMSE#PBF | Analog Devices Inc | INSTOCK RoHS : Compliant | 2,034 | |||
| PI5C3125W | INSTOCK | 1,712 | ||||
| C317C103Z5U5CA | KEMET Corporation | INSTOCK RoHS : Compliant | 800 | |||
DS80C310-FCG![]() | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 384 | |||
| B82496C3101J | TDK Electronics | INSTOCK RoHS : Compliant | 48 | |||
| AS7C31024B-15JCN | onsemi | INSTOCK | 25 | |||
| TSC80C31-16CB | INSTOCK | 22 | ||||
| ADMC315AP | AD E | INSTOCK | 16 | |||
![]() Braemac Americas-Symmetry | STC31-C-R3 | Sensirion | STC31-C, Thermal Conductivity Sensor for CO2 IC RoHS : Compliant |
| 1 | |
| ASVMPAHC-312.5000MHZ-L-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPAHC-312.5000MHZ-XR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPAHC-312.5000MHZ-L-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-312.5000MHZ-XR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-312.5000MHZ-XR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPAHC-312.5000MHZ-LJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPAHC-312.5000MHZ-LR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPAHC-312.5000MHZ-XR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPAHC-312.5000MHZ-LR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-312.5000MHZ-LJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPAHC-312.5000MHZ-XJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-312.5000MHZ-L-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| STC31-C-R5 | Sensirion | STC31-C, Thermal Conductivity Sensor for CO2 IC RoHS : Compliant |
| 0 | ||
| ASVMPAHC-312.5000MHZ-X-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() EBV Elektronik | VLMC3100-GS08 | Vishay Intertechnologies | SMDLED LC GREEN PLCC2e3 (Alt: VLMC3100-GS08) RoHS : Compliant | 223,500 | ||
| HLMP-C315 | Broadcom Limited | (Alt: HLMP-C315) RoHS : Compliant | 12,000 | |||
| STC3115AIJT | STMicroelectronics | Battery Fuel Gauge LiIon LiPol 27V to 42V Supply I2C Interface CSP10 (Alt: STC3115AIJT) RoHS : Compliant | 10,000 | |||
| MOC3163M | onsemi | Triac Driver Output Optocoupler 6Pin DIP 600V Zero Crossing ONSSPCISTNJZ8E4V (Alt: MOC3163M) RoHS : Compliant | 1,000 | |||
| LDK120C31R | STMicroelectronics | LDO Regulator Pos 31V 02A 5Pin SOT323 TR (Alt: LDK120C31R) RoHS : Compliant | 0 | |||
| RE46C318S8F | Microchip Technology Inc | Piezoelectric Horn Driver 8Pin SOIC (Alt: RE46C318S8F) RoHS : Compliant | 0 | |||
| MGC3140-E/MV | Microchip Technology Inc | GestIC with PCap 48 pin no USB (Alt: MGC3140-E/MV) RoHS : Compliant | 0 | |||
| RE46C318S8TF | Microchip Technology Inc | Piezoelectric Horn Driver with Boost Converter 8Pin SOIC TR (Alt: RE46C318S8TF) RoHS : Compliant | 0 | |||
| AFIC31025GNR1 | NXP Semiconductors | Airfast RF Power LDMOS Transistor 2300 to 2690MHz 25W 28V TO270WBG17 TR (Alt: AFIC31025GNR1) RoHS : Compliant | 0 | |||
| S6E1C31B0AGN20000 | Infineon Technologies AG | (Alt: SP005637245) RoHS : Compliant | 0 | |||
| CBT-90-UV-C31-L400-22 | Luminus Devices | LED UniColor Ultraviolet 133W 405nm LED Board (Alt: CBT-90-UV-C31-L400-22) RoHS : Compliant | 0 | |||
| CBT-90-UV-C31-M400-22 | Luminus Devices | LED UniColor Ultra Violet 405nm LED Board MCPCB (Alt: CBT-90-UV-C31-M400-22) RoHS : Compliant | 0 | |||
| CBT-120-UV-C31-R400-22 | Luminus Devices | LED UniColor Ultra Violet 410nm LED Board MCPCB (Alt: CBT-120-UV-C31-R400-22) RoHS : Compliant | 0 | |||
| CBM-120-UV-C31-H365-21 | Luminus Devices | LED UniColor Ultraviolet 91W 368nm LED Board MCPCB Tray (Alt: CBM-120-UV-C31-H365-21) RoHS : Compliant | 0 | |||
| CBM-120-UV-C31-J380-21 | Luminus Devices | LED Mosaic Array PCB Ultraviolet 380nm C31 Pkg 28x2675mm Tray (Alt: CBM-120-UV-C31-J380-21) RoHS : Compliant | 0 | |||
![]() Maritex | TLV320ADC3101IRGER![]() | Texas Instruments | Special-Purpose ADC/DAC; TLV320ADC3101IRGER; TEXAS INSTRUMENTS; 24; 2 B; Analog, Digital; I2C RoHS : Compliant |
| 29,800 | |
AM26C31IPWR![]() | Texas Instruments | RS-485/RS-422 Transceivers; AM26C31IPWR; TEXAS INSTRUMENTS; 4.5 V; 10 Mbps; Transceiver; 100 �A RoHS : Compliant |
| 15,766 | ||
ST26C31BTR![]() | STMicroelectronics | Other Interface ICs; ST26C31BTR; STMICROELECTRONICS; 16; 5.5 V; TSSOP; 4.5 V RoHS : Compliant |
| 12,782 | ||
| ESP-C3-12F-C3FN4 | AI-Thinker | Module; Wi-Fi/Bluetooth; transceiver; 2400-2483.5MHz; +18dBm; -96dBm; UART/GPIO/I2C/I2S/PWM/ADC/SPI; ESP32-C3; 4Mb flash; built-in antenna; 3.0-3.6V; SMD; 24x16x3.1mm |
| 7,404 | ||
| C310003614S | Amphenol Corporation | Rectangular Connector Housings; C310003614S; AMPHENOL |
| 5,066 | ||
TLV320AIC3104IRHBR![]() | Texas Instruments | Audio Interface ICs; TLV320AIC3104IRHBR; TEXAS INSTRUMENTS; 32; 1.1 V; 3.6 V; 1 mm RoHS : Compliant |
| 4,188 | ||
| R79GC3100Z340J | KEMET Corporation | Film Capacitors; R79GC3100Z340J; KEMET; Radial; 7.2 mm; 100 nF; 160 V RoHS : Compliant |
| 983 | ||
TLV320AIC3104IRHBT![]() | Texas Instruments | Audio Interface ICs; TLV320AIC3104IRHBT; TEXAS INSTRUMENTS; 32; 3.6 V; 1 mm; VQFN RoHS : Compliant |
| 500 | ||
| PEC3124C2A-AU_R1_000A1 | PanJit Semiconductor | TVS Diodes & ESD Suppressors; PEC3124C2A-AU_R1_000A1; PANJIT; 24 V; 25.4 V RoHS : Compliant |
| 199 | ||
| LTC3119IUFD#PBF | Analog Devices Inc | DC DC Converters; LTC3119IUFD#PBF; ANALOG DEVICES; 28; Buck-Boost; 800 �m; 1 RoHS : Compliant |
| 46 | ||
TLV320ADC3100IRGER![]() | Texas Instruments | Special-Purpose ADC/DAC; TLV320ADC3100IRGER; TEXAS INSTRUMENTS; 24 RoHS : Compliant |
| 20 | ||
![]() Neutron USA | MBCC-312 | Banner Engineering Corp | Cable, Photoelectric, 10 To 30 VDC, 2.4 In. L X 1.1 In. Dia., MBCC Series |
| 50 | |
| VA-USBC31-VGA | Black Box Corporation | VIDEO ADAPTER DONGLE - USB 3.1 TYPE C MALE TO VGA FEMALE |
| 50 | ||
| FFA.00.250.NTAC31Z | LEMO connectors | Circular Push Pull Connectors Circular Plug, 1 Coax 50-Ohm Contacts, with Solder termination RoHS : Compliant |
| 50 | ||
| UC-3101-T-US-LX | Moxa Inc | RISC-based LTE cat.1 computer for US (AT&T), 1 GHz CPU, 512MB RAM, 4GB eMMC, 2 Ethernet, 1 serial port, 1 USB port and -30 to 70°C operating temperature |
| 50 | ||
| MQDC-315 | Banner Engineering Corp | Single Ended Cordset, 1/2 In Female to Pigtail, 5 m, PVC, Straight, MQDC Series |
| 36 | ||
| EVC313 | ifm efector inc | Cordset, Str M8 F 4p to Str M8 M 4p, 4wire 2m, PUR Black RoHS : Compliant |
| 28 | ||
| FFA.00.113.CTAC31Z | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET RoHS : Compliant |
| 25 | ||
| VA-USBC31-DVID-006 | Black Box Corporation | 6FT USB-C TO DVI ADAPT CABLE 1080P HD |
| 20 | ||
| C31CA85090 | Seiko Epson Corporation | TM-T88V-950 POWERED USB+ USB EDG AUTO CUT NO POWER SUPPLY INCL |
| 2 | ||
| RPA-C3-100 | Banner Engineering Corp | Safety Rope, Pull ACcess Rope Wire 4mm Dia 100M Long, 62079 |
| 1 | ||
| VA-USBC31-HDR4K-003 | Black Box Corporation | 3FT USB-C TO HDMI ACTIVE ADAPT CABLE 4K60 HDR |
| 0 | ||
| PPC-3100S-HDDE | Advantech Co Ltd | 2.5' SATA HDD module for PPC-3100S |
| 0 | ||
| MBCC-312RA | Banner Engineering Corp | Sensor Cables / Actuator Cables Cordset: Single Ended 7/8 in; 3-pin Right-Angle Female Shielded; 4 m 3x18 Black PVC Jacket; Nylon Black Coupling Nut |
| 0 | ||
| PPC-3100S-RAU | Advantech Co Ltd | Panel PC, Intel Celeron N2930 fanless 10.4" Panel |
| 0 | ||
| UC-3100 WALL-MOUNTING KIT | Moxa Inc | Wall-mounting kit with 4 screws |
| 0 | ||
![]() Pasternack Enterprises US | PE3C3146-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly TNC male to BNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to BNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our low loss TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3146-36 can also be known as a low loss TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3C3146-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3146-36 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components. |
| 270 | |
| PE3C3197 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3197 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3197 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable using LMR-240 coax with Times Microwave components. | 215 | |||
| PE3C3137-72 | Pasternack Enterprises |
| 6 | |||
| PE3C3115 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using PE-P300LL Coax, LF Solder. PE3C3115 is a N male right angle to N female cable using PE-P300LL coax. This Pasternack N male right angle to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3115 N male right angle to N female cable assembly is constructed with PE-P300LL coax. | 0 | |||
| PE3C3153/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Right Angle Cable Using LMR-240 Coax with HeatShrink. PE3C3153/HS is a BNC male to SMA male right angle cable using LMR-240 coax. This Pasternack BNC male to SMA male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3153/HS BNC male to SMA male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3156LF-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Water Blue FAKRA Jack to FAKRA Jack Low Loss Cable 200 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly water blue FAKRA jack to FAKRA jack low loss cable 200 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack to FAKRA jack low loss cable 200 cm length using LMR-100 coax, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. PE3C3156LF-200CM can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE3C3156LF-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to FAKRA jack low loss cable 200 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3C3168LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-C100-LSZH Coax, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 12 inch length using PE-C100-LSZH coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 12 inch length using PE-C100-LSZH coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3168LF-12 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3168LF-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 12 inch length using PE-C100-LSZH coax, LF solder. |
| 0 | ||
| PE3C3188-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 10-32 Male to BNC Female Low Loss Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly 10-32 male to BNC female low loss cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male to BNC female low loss cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our low loss 10-32 to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3C3188-12 can also be known as a low loss 10-32 plug to BNC jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to BNC jack cable assembly PE3C3188-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency 10-32 male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3188-12 can also be used in the other direction and will be BNC female to 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male to BNC female low loss cable 12 inch length using PE-C100-LSZH coax. |
| 0 | ||
| PE3C3188/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 10-32 Male to BNC Female Low Loss Cable 36 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly 10-32 male to BNC female low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male to BNC female low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 10-32 cable connection on one end and a BNC cable connection on the other. Our low loss 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C3188/HS-36 can also be known as a low loss 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3188/HS-36 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our 10-32 male to BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3C3188/HS-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3188/HS-36 can also be used in the other direction and will be a BNC female to 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 plug to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3111-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. UHF Male to UHF Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-180 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3139-9 | Pasternack Enterprises |
| 0 | |||
| PE3C3142 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50. Mini SMP Female to MMCX Jack Cable Using PE-SR405FL Coax. PE3C3142 is a Mini SMP female to MMCX jack cable using PE-SR405FL coax. This Pasternack Mini SMP female to MMCX jack cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm MMCX for connector 2. Our female Mini SMP to jack MMCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C3142 Mini SMP female to MMCX jack cable assembly is constructed with PE-SR405FL coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3C3152-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3152-48 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C3152-48 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG174 coax. |
| 0 | ||
| PE3C3179 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Trimmed Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50. SMA Female to Trimmed Lead Cable Using PE-SR047FL Coax. PE3C3179 is a SMA female to Trimmed Lead sexless cable using PE-SR047FL coax. This Pasternack SMA female to Trimmed Lead sexless cable assembly uses a 50 Ohm SMA for connector 1 and a Trimmed Lead for connector 2. Our female SMA to sexless Trimmed Lead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C3179 SMA female to Trimmed Lead sexless cable assembly is constructed with PE-SR047FL coax. | 0 | |||
| PE3C3120/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG402 Coax with 180 Deg. Clock. PE3C3120/PH180 is a N male right angle to N male right angle cable using RG402 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3120/PH180 N male right angle to N male right angle cable assembly is constructed with RG402 coax. | 0 | |||
![]() TE Connectivity | IL13PS-C14-DUAL-LOCK-UC-3100-200 | TE Connectivity | IL13PS-C14-DUAL-LOCK-UC-3100-200 Operating Voltage (Max): 250 VAC Current Rating (Max): 10 A Product Length: 200 mm Product Length: 7.87 in IP Rating: IP20 Il13P | 250 VAC 10 A 200 mm 7.87" | Part Number: IL13PS-C14-DUAL-LOCK-UC-3100-200 | Internal Number: 823428-SF | TE Connectivity RoHS : Compliant |
| 82 | |
| IL13PS-C14-DUAL-LOCK-UC-3100-300 | TE Connectivity | IL13PS-C14-DUAL-LOCK-UC-3100-300 Operating Voltage (Max): 250 VAC Current Rating (Max): 10 A Product Length: 300 mm Product Length: 11.81 in IP Rating: IP20 Il13P | 250 VAC 10 A 300 mm 11.81" | Part Number: IL13PS-C14-DUAL-LOCK-UC-3100-300 | Internal Number: 823430-SF | TE Connectivity RoHS : Compliant |
| 48 | ||
![]() Venkel Ltd. | MELFC0204-TC-3163FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;316K;�1% RoHS : Compliant | 0 | ||
| MELFC0204-ZC-3163DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;316K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-31R6CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;31.6R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VC-3164FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;3.16M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-3162FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;31.6K;�1% RoHS : Compliant | 0 | |||
| MELFM0204-TC-3162CT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;31.6K;�0.25% RoHS : Not Compliant | 0 | |||
| MELFM0207-VC-31R6BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;31.6R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XC-3161CT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;3.16K;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF0603-SC-3163AT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;316K ;�0.05% RoHS : Compliant | 0 | |||
| HPTF2512-XC-31R6FT | VENKEL LTD | High Power Thin Film CR;2512;1W;�50PPM;31.6R;�1% RoHS : Compliant | 0 | |||
| MEHF0207-VC-31R6GT | VENKEL LTD | High Frequency MELF;0207;1/2W;�50PPM;31.6R�2% RoHS : Not Compliant | 0 | |||
| MELFC0102-RC-31R6FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;31.6R;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-3161FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;3.16K;�1% RoHS : Compliant | 0 | |||
| MELFM0204-ZC-3160CT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;316R;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF0603-SC-3161CT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;3.16K;�0.25% RoHS : Compliant | 0 | |||
![]() Vyrian | LTC3114MPFE-1-TRPBF | Analog Devices Inc | 11,946 | |||
| LTC3109EGN-TRPBF | Analog Devices Inc | 11,697 | ||||
| LTC3101EUF-TRPBF | Analog Devices Inc | 9,326 | ||||
| C315C471F3G5TA | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.00047uF, Through Hole Mount | 8,641 | |||
| LTC3127EMSE#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 1700kHz Switching Freq-Max, CMOS, PDSO12 RoHS : Compliant | 8,395 | |||
| LTC3113IDHD#TRPBF | Analog Devices Inc | Switching Regulator, Voltage-mode, 16A, 2000kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 8,211 | |||
| LTC3111HDE-PBF | Analog Devices Inc | 6,718 | ||||
| LTC3109IUF-TRPBF | Analog Devices Inc | 6,621 | ||||
| LTC3129EMSE-1-TRPBF | Analog Devices Inc | 6,479 | ||||
| LTC3109EUF-PBF | Analog Devices Inc | 6,380 | ||||
AT80C31X2-3CSUL![]() | Atmel Corporation | Microcontroller, 8-Bit, 8051 CPU, 30MHz, CMOS, PDIP40 RoHS : Compliant | 6,246 | |||
| LTC3130EMSE-PBF | Analog Devices Inc | 5,658 | ||||
| LTC3114IFE-1#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 2.3A, 1400kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 5,268 | |||
| MGC3140-E/MV | Microchip Technology Inc | Capacitive Touch Sensor, 48 Pin, Plastic RoHS : Compliant | 4,726 | |||
| GA0805A1R8CXEBC31G | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 500V, 13.8889% +Tol, 13.8889% -Tol, C0G, 30ppm/Cel TC, 0.0000018uF, Surface Mount, 0805 RoHS : Compliant | 577 | |||
![]() Waytek, Inc. | 22AAWC310400 | Essentra Components | .39" Bundle Adjustable Clamp Black, wire, Adhesive Backed WIDTH 3/4 " MIN BUNDLE .311" |
| 4,510 | |
| RT40R0C3 115-06200 | HellermannTyton | HellermannTyton RT40R0C2 releasable cable tie is an 8.5" reusable self-locking tie built for temporary or serviceable wire and cable bundling. Its releasable head design allows adjustment or removal without cutting, making it useful for maintenance, testing, and rework applications. |
| 3,700 | ||
| PC792A-1C-C3-12S-RNX | Picker Components | Mini ISO Relay 12V, SPDT 40A NO, 30A NC, Resistor |
| 1,066 | ||
| PC792A-1C-C3-12S-DNX | Picker Components | Mini ISO Relay, 12V, SPDT 40A NO, 30A NC, Diode Skirted, Repl#75633|Sub#75615 |
| 0 | ||
![]() Win Source Electronics | AM26C31IPWRG4![]() | Texas Instruments | QUADRUPLE DIFFERENTIAL LINE DRIVER RoHS : Compliant |
| 123,140 | |
| B32922C3104M289 | TDK Electronics | 0.1 µF Film Capacitor 305V 630V Polypropylene (PP) Radial RoHS : Compliant |
| 118,980 | ||
TLV320DAC3100IRHBR![]() | Texas Instruments | IC DAC STER/AUDIO D LP 32QFN RoHS : Compliant |
| 37,560 | ||
TLV320DAC3101IRHBT![]() | Texas Instruments | Low-Power Stereo Audio DAC With Audio Processing and Stereo Class-D Speaker Amplifier RoHS : Compliant |
| 29,780 | ||
AM26C31IPWG4![]() | Texas Instruments | QUADRUPLE DIFFERENTIAL LINE DRIVER RoHS : Compliant |
| 28,250 | ||
TLV320DAC3101IRHBR![]() | Texas Instruments | Low-Power Stereo Audio DAC With Audio Processing and Stereo Class-D Speaker Amplifier RoHS : Compliant |
| 28,180 | ||
ST72C314N4T6![]() | STMicroelectronics | 8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, ADC, 16-BIT TIMERS, SPI, SCI INTERFACES RoHS : Not Compliant |
| 15,740 | ||
| LTC3127EMSE#TRPBF | Analog Devices Inc | IC DCDC CONV BUCK BOOST 12MSOP / Energy Harvesting PMIC 12-MSOP-EP RoHS : Compliant |
| 6,970 | ||
N80C31BH![]() | Intel Corporation | CHMOS SINGLE-CHIP 8-BIT MICROCONTROLLER RoHS : Not Compliant |
| 5,500 | ||
| LTC3130EMSE#PBF | Linear Technology | IC REG BUCK BST ADJ 0.6A 16MSOP / Conv DC-DC 2.4V to 25V Step Down/Step Up Single-Out 1V to 25V 0.6A 16-Pin MSOP EP Tube RoHS : Compliant |
| 4,560 | ||
LTC3101EUF#TRPBF![]() | Linear Technology | IC BUCK/BST TRPL ADJ 350MA 24QFN RoHS : Compliant |
| 2,800 | ||
| LTC3101EUF#PBF | Analog Devices Inc | Multi-Output DC/DC Converter and PowerPath Controller to 24-Pin QFN EP Tube RoHS : Compliant |
| 2,800 | ||
CC3100MODR11MAMOBT![]() | Texas Instruments | IC MCU SIMPLELINK WI-FI MOD VQFN / Module 802.11b/g/n 2.4GHz 16000Kbps 63-Pin SMD Module T/R RoHS : Compliant |
| 2,580 | ||
| LTC3114IFE-1#TRPBF | Analog Devices Inc | IC REG BCK BST ADJ 1A 16TSSOP RoHS : Compliant |
| 2,500 | ||
| LTC3113IDHD#TRPBF | Analog Devices Inc | IC REG BCK BST ADJ 3A 16DFN RoHS : Compliant |
| 910 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |