Electronic Components Datasheet Search
  English  ▼

X  



C1209 Distributor
DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Avnet Americas		MC12093DG

 onsemi - Rail/Tube (Alt: MC12093DG)
RoHS : Compliant
1,568 : $4.12145
784 : $4.17171
392 : $4.22321
196 : $4.276
98 : $4.38564
186
MRS25000C1209FRP00

 Vishay Intertechnologies MRS25-50 1% RP 12R - Tape and Reel (Alt: MRS25000C1209FRP00)
RoHS : Compliant
80,000 : $0.03266
40,000 : $0.03283
20,000 : $0.033
10,000 : $0.03317
5,000 : $0.0335
0
MC12093DR2

 onsemi - Tape and Reel (Alt: MC12093DR2)
RoHS : Not Compliant
0
MBA0204BC1209FRP00

 Vishay Intertechnologies Resistor Professional Metal Film 12 Ohm 1% 1/4W ?50ppm/K Ceramic Axial T/R - Tape and Reel (Alt: MBA0204BC1209FRP00)
RoHS : Compliant
80,000 : $0.05168
40,000 : $0.05194
20,000 : $0.05221
10,000 : $0.05247
5,000 : $0.053
0
MBA0204VC1209FC100

 Vishay Intertechnologies MBA0204VC1209FC100 - Ammo Pack (Alt: MBA0204VC1209FC100)
RoHS : Compliant
16,000 : $0.20573
8,000 : $0.20678
4,000 : $0.20784
2,000 : $0.20889
1,000 : $0.211
0
MBB02070C1209DRP00

 Vishay Intertechnologies MBB/SMA 0207-50 0.5% RP 12R - Tape and Reel (Alt: MBB02070C1209DRP00)
RoHS : Compliant
80,000 : $0.078
40,000 : $0.0784
20,000 : $0.0788
10,000 : $0.0792
5,000 : $0.08
0
MBB0207IC1209FCT00

 Vishay Intertechnologies Resistor Professional Metal Film 12 Ohm 1% 2/5W ?50ppm/K Ceramic Axial T/R - Ammo Pack (Alt: MBB0207IC1209FCT00)
RoHS : Compliant
80,000 : $0.03266
40,000 : $0.03283
20,000 : $0.033
10,000 : $0.03317
5,000 : $0.0335
0
MMU0102AC1209GB100

 Vishay Intertechnologies MMU0102AC1209GB100 - Tape and Reel (Alt: MMU0102AC1209GB100)
RoHS : Compliant
16,000 : $0.28799
8,000 : $0.28946
4,000 : $0.29094
2,000 : $0.29242
1,000 : $0.29537
0
MBA0204AC1209FC100

 Vishay Intertechnologies Res Metal Film 12Ohm 1% 1/4W ?50ppm/K Conformal Axial Box - Ammo Pack (Alt: MBA0204AC1209FC100)
RoHS : Compliant
16,000 : $0.2535
8,000 : $0.2548
4,000 : $0.2561
2,000 : $0.2574
1,000 : $0.283
0
SMM02070C1209FBS00

 Vishay Intertechnologies - Tape and Reel (Alt: SMM02070C1209FBS00)
RoHS : Compliant
120,000 : $0.06625
60,000 : $0.06709
30,000 : $0.06795
15,000 : $0.06883
7,500 : $0.06974
0
MBA02040C1209FRP00

 Vishay Intertechnologies MBA/SMA 0204-50 1% RP 12R - Tape and Reel (Alt: MBA02040C1209FRP00)
RoHS : Compliant
80,000 : $0.05676
40,000 : $0.05705
20,000 : $0.05735
10,000 : $0.05764
5,000 : $0.05853
0
MMU01020C1209DB300

 Vishay Intertechnologies MMU01020C1209DB300 - Tape and Reel (Alt: MMU01020C1209DB300)
RoHS : Compliant
48,000 : $0.11213
24,000 : $0.1127
12,000 : $0.11328
6,000 : $0.11385
3,000 : $0.115
0
MBA02040C1209DC100

 Vishay Intertechnologies Resistor Professional Metal Film 12 Ohm 0.5% 1/4W ?50ppm/K Ceramic Axial T/R - Ammo Pack (Alt: MBA02040C1209DC100)
RoHS : Compliant
16,000 : $0.3666
8,000 : $0.36848
4,000 : $0.37036
2,000 : $0.37224
1,000 : $0.376
0
MBA0204BC1209FC100

 Vishay Intertechnologies MBA/SMA 0204-50 1% KL C1 12R - Ammo Pack (Alt: MBA0204BC1209FC100)
RoHS : Compliant
16,000 : $0.18135
8,000 : $0.18228
4,000 : $0.18321
2,000 : $0.18414
1,000 : $0.202
0
SMM02040C1209FB300

 Vishay Intertechnologies - Tape and Reel (Alt: SMM02040C1209FB300)
RoHS : Compliant
48,000 : $0.02375
24,000 : $0.02405
12,000 : $0.02436
6,000 : $0.02468
3,000 : $0.025
0

Mouser Electronics		RMC1/20-9532FPA

 Kamaya Inc Thick Film Resistors - SMD 0201 95K3 1% Lead Free
RoHS : Compliant
1 : $0.14
10 : $0.035
100 : $0.017
250 : $0.012
500 : $0.01
1,000 : $0.009
5,000 : $0.005
10,000 : $0.004
30,000 : $0.003
30,000
MCU08050C1209FP500

 Vishay Intertechnologies Thin Film Resistors - SMD MCU 0805-50 1% P5 12R
RoHS : Compliant
1 : $0.5
10 : $0.256
100 : $0.151
250 : $0.128
500 : $0.111
1,000 : $0.099
5,000 : $0.081
10,000 : $0.074
25,000 : $0.069
4,611
MCT06030C1209FP500

 Vishay Intertechnologies Thin Film Resistors - SMD MCT 0603-50 1% P5 12R
RoHS : Compliant
1 : $0.2
10 : $0.099
100 : $0.056
250 : $0.046
500 : $0.04
1,000 : $0.035
5,000 : $0.023
10,000 : $0.022
25,000 : $0.02
4,420
MC12093DR2G

 onsemi Prescaler 1.1GHz Low Power Prescaler w/ Standby
RoHS : Compliant
1 : $5.11
10 : $3.89
25 : $3.59
100 : $3.26
250 : $3.1
500 : $3.04
1,000 : $3.01
2,500 : $2.96
4,196
MCA12060C1209FP500

 Vishay Intertechnologies Thin Film Resistors - SMD MCA 1206-50 1% P5 12R
RoHS : Compliant
1 : $0.48
10 : $0.338
100 : $0.234
250 : $0.209
500 : $0.203
5,000 : $0.172
3,098
MBE04140C1209FR200

 Vishay Intertechnologies Metal Film Resistors - Through Hole MBE/SMA 0414-50 1% R2 12R
RoHS : Compliant
1 : $0.92
10 : $0.52
25 : $0.422
100 : $0.315
250 : $0.274
500 : $0.249
1,000 : $0.227
4,000 : $0.201
2,264
MMB02070C1209FB200

 Vishay Intertechnologies MELF Resistors 1W 12ohms 1% 0207 MELF 300V 50ppm
RoHS : Compliant
1 : $0.16
10 : $0.137
25 : $0.12
100 : $0.114
500 : $0.1
1,000 : $0.091
2,000 : $0.091
4,000 : $0.083
8,000 : $0.081
1,438
MC12093MNR4G

 onsemi Prescaler LO PWR PRESCLR 2/4/8
RoHS : Compliant
1 : $5.11
10 : $3.89
25 : $3.59
100 : $3.26
250 : $3.1
500 : $3.03
1,000 : $2.93
1,295
MBE04140C1209DC100

 Vishay Intertechnologies Metal Film Resistors - Through Hole MBE/SMA 0414-50 0.5% C1 12R
1 : $1.13
10 : $0.648
25 : $0.528
100 : $0.406
250 : $0.355
500 : $0.323
1,000 : $0.277
954
RMC1/20-911FPA

 Kamaya Inc Thick Film Resistors - SMD
RoHS : Compliant
1 : $0.17
10 : $0.043
100 : $0.021
250 : $0.015
500 : $0.013
1,000 : $0.012
5,000 : $0.007
10,000 : $0.005
15,000 : $0.004
900
RMC1/20-911JPA

 Kamaya Inc Thick Film Resistors - SMD 0201 910R 5% Lead Free
RoHS : Compliant
1 : $0.12
10 : $0.03
100 : $0.015
250 : $0.011
500 : $0.01
1,000 : $0.009
5,000 : $0.005
10,000 : $0.004
15,000 : $0.002
345
MC12093DG

 onsemi Prescaler 1.1GHz Low Power Prescaler w/ Standby
RoHS : Compliant
1 : $7.41
10 : $5.73
25 : $4.85
98 : $4.64
299
C12097_MINNIE-WWW

 LEDIL LED Lighting Reflectors Reflector
RoHS : Compliant
1 : $4.19
10 : $3.05
120 : $1.92
540 : $1.75
1,020 : $1.74
2,520 : $1.7
33
RMC1/20-912FPA

 Kamaya Inc Thick Film Resistors - SMD
RoHS : Compliant
1 : $0.17
10 : $0.043
100 : $0.021
250 : $0.015
500 : $0.013
1,000 : $0.012
5,000 : $0.007
10,000 : $0.005
15,000 : $0.004
20
C12095_MINNIE-M

 LEDIL LED Lighting Reflectors Reflector
RoHS : Compliant
1 : $4.19
10 : $2.91
120 : $2.01
540 : $1.84
1,020 : $1.81
2,520 : $1.78
0

Newark		MMA02040C1209FB300

 Vishay Intertechnologies Res, Melf, Metal Film, Smd, 12R, 250Mw; |Vishay MMA02040C1209FB300
RoHS : Compliant
5 : $0.105
10 : $0.06
15 : $0.057
25 : $0.054
50 : $0.053
125 : $0.051
250 : $0.048
500 : $0.045
17,401
MMA02040C1209FB300

 Vishay Intertechnologies Res, Melf, Metal Film, Smd, 12R, 250Mw; |Vishay MMA02040C1209FB300
RoHS : Compliant
50 : $0.053
125 : $0.051
250 : $0.048
500 : $0.045
17,401
MRS25000C1209FCT00

 Vishay Intertechnologies Res, 12R, 1%, 600Mw, Axial, Metal Film; |Vishay MRS25000C1209FCT00
RoHS : Compliant
10 : $0.097
20 : $0.092
30 : $0.087
50 : $0.085
100 : $0.082
250 : $0.078
500 : $0.073
1,000 : $0.072
6,000
MBB02070C1209FCT00

 Vishay Intertechnologies Res, 12R, 1%, 0.6W, Axial, Metal Film; |Vishay MBB02070C1209FCT00
RoHS : Compliant
10 : $0.159
20 : $0.14
30 : $0.12
50 : $0.114
100 : $0.108
250 : $0.094
500 : $0.084
1,000 : $0.076
4,568
MBB02070C1209FCT00

 Vishay Intertechnologies Res, 12R, 1%, 0.6W, Axial, Metal Film; |Vishay MBB02070C1209FCT00
RoHS : Compliant
500 : $0.084
1,000 : $0.076
4,568
MMB02070C1209FB200

 Vishay Intertechnologies Res, Aec-Q200, Thin Film, 12R, 1%, 0207; |Vishay MMB02070C1209FB200
RoHS : Compliant
5 : $0.172
10 : $0.149
15 : $0.141
25 : $0.132
50 : $0.129
125 : $0.126
250 : $0.119
500 : $0.112
3,396
MMB02070C1209FB200

 Vishay Intertechnologies Res, Aec-Q200, Thin Film, 12R, 1%, 0207; |Vishay MMB02070C1209FB200
RoHS : Compliant
50 : $0.129
125 : $0.126
250 : $0.119
500 : $0.112
3,396
SMM02040C1209FB300

 Vishay Intertechnologies Res, 12R, 1%, 0.4W, 0204, Thin Film; |Vishay SMM02040C1209FB300
RoHS : Compliant
50 : $0.05
125 : $0.049
250 : $0.048
500 : $0.047
3,104
SMM02040C1209FB300

 Vishay Intertechnologies Res, 12R, 1%, 0.4W, 0204, Thin Film; |Vishay SMM02040C1209FB300
RoHS : Compliant
5 : $0.105
10 : $0.057
15 : $0.054
25 : $0.051
50 : $0.05
125 : $0.049
250 : $0.048
500 : $0.047
3,104
SMM02070C1209FBP00

 Vishay Intertechnologies Res, 12R, 1%, 1W, 0207, Thin Film; |Vishay SMM02070C1209FBP00
RoHS : Compliant
100 : $0.126
250 : $0.119
500 : $0.112
1,000 : $0.104
2,500 : $0.101
5,000 : $0.097
459
SMM02070C1209FBP00

 Vishay Intertechnologies Res, 12R, 1%, 1W, 0207, Thin Film; |Vishay SMM02070C1209FBP00
RoHS : Compliant
1 : $0.172
25 : $0.132
100 : $0.126
250 : $0.119
500 : $0.112
1,000 : $0.104
2,500 : $0.101
5,000 : $0.097
459
MC12093MNR4G

 onsemi Prescaler, 1.1Ghz, Dfn-8; |Onsemi MC12093MNR4G
RoHS : Compliant
1 : $5.01
50 : $3.52
100 : $3.45
250 : $3.38
500 : $3.31
1,000 : $3.24
2,500 : $3.17
5,000 : $3.1
374
MC12093MNR4G

 onsemi Prescaler, 1.1Ghz, Dfn-8; |Onsemi MC12093MNR4G
RoHS : Compliant
100 : $3.45
250 : $3.38
500 : $3.31
1,000 : $3.24
2,500 : $3.17
5,000 : $3.1
374
C12097_MINNIE-WWW-MTG

 LEDIL Led Reflector, Cree Led Mt-G; Reflector Inner Diameter:12.8Mm; Reflector Overall Height:14.75Mm; Reflector Material:Pc (Polycarbonate); Product Range:-; Accessory Type:Led Reflector; Beam Angle:74°; For Use With:Cree Led Mt-G Series Rohs Compliant: Yes
RoHS : Compliant
1 : $2.83
10 : $2.45
25 : $2.15
50 : $2.01
100 : $1.74
250 : $1.47
500 : $1.42
295
MC12093DG

 onsemi Ic, Sm, Logic, Ecl, Clock Gen; |Onsemi MC12093DG
RoHS : Compliant
1 : $7.41
10 : $5.72
25 : $5.43
50 : $5.13
100 : $4.84
250 : $4.67
500 : $4.58
22

Analog Devices Inc		DC1209A

 Analog Devices Inc LT3060EDC Demo Board - 45V Vin
RoHS : Compliant
1 : $117.13
1,000 : $111.67
12

RS		DSC-1209

 Quest Technology International Inc D-SUB FEMALE CONNECTOR, 5 A, 500 VDC, 9 PIN, SOLDER TERMINATION, DSC SERIES
RoHS : Compliant
1 : $0.75
100 : $0.64
868
MC12093DG

 onsemi 1.1 GHZ DIVIDED BY {2, 4, 8} LOW POWER PRESCALER W/STAND-BY MODE, PB-FREE SOIC8
RoHS : Compliant
1 : $7.41
5 : $6.82
0
LACRC1209

 Hubbell Wiring Device-Kellems AL LADDER, COVER, RC,12INW1,09INW2
1 : $29.75
10 : $28.26
0
E2 AC-DXBC1209

 Pizzato Elettrica Srl COMPLETE UNIT WITH PUSHBUTTON, FIXING ADAPTER AND CONTACT
1 : $23.37
10 : $22.2
25 : $21.5
0
ARM11AC1-209-L

 SMC Corporation of America REGULATOR, COMMON SUPPLY, BOTTOM HANDLE, 2 STATIONS
1 : $98.0
0
MMA02040C1209FB300

 Vishay Dale MMA0204 SERIES THIN FILM SMNT RESTR 0204 MELF CASE 12OHMS +/-1%.25W +/-50PPM/C
25 : $0.06
125 : $0.052
250 : $0.05
0
MMU01020C1209FB300

 Vishay Dale PRECISION THIN FILM SMNT RESTR 0102 MELF CASE 12OHM +/-1%.2W +/-50PPM/C
25 : $0.1
125 : $0.096
250 : $0.092
0
279C-120 (98059904)

 Time Mark Corporation DC CUR MON,120VAC, SPDT,(98059904)
1 : $320.41
0

Rochester Electronics		MC12093DR2G

 onsemi Clock Generators and Synthesizers Prescaler 1.1GHz 8-SOIC T/R
RoHS : Compliant
10,000 : $2.16
1,000 : $2.3
500 : $2.43
100 : $2.57
25 : $2.7
54
MC12095D

 onsemi Prescaler, ECL Series, 1-Func, PDSO8
RoHS : Not Compliant
100,000 : $0.992
10,000 : $1.18
1,000 : $1.33
500 : $1.44
100 : $1.6
165
MC12093D

 onsemi Prescaler, ECL Series, 1-Func, PDSO8
RoHS : Not Compliant
100,000 : $0.992
10,000 : $1.18
1,000 : $1.33
500 : $1.44
100 : $1.6
8,110
MC12093DG

 onsemi Clock Generators and Synthesizers Prescaler 1.1GHz 8-SOIC Tube
RoHS : Compliant
10,000 : $3.34
1,000 : $3.55
500 : $3.76
100 : $3.97
25 : $4.18
2,745

Sager		53HC12090

 Switchcraft Conxall Phone Connectors
0
LACRC1209

 Hubbell Incorporated AL LADDER,COVER, RC,12W1,09W2
1 : $43.75
10 : $41.25
19 : $39.56
0

TME		SMM02040C1209FB300

 Vishay Intertechnologies 12Ω; ±1%; 250mW; -55÷155°C; MiniMELF; 0204; 50ppm/°C; 3.6x1.4mm
RoHS : Compliant
6,000 : $0.0164
87,000
MMB02070C1209FB200

 Vishay Intertechnologies Resistor: metal film; 12Ω; SMD; 1W; ±1%; 350V; Ø2.2x5.8mm; -55÷155°C
RoHS : Compliant
10,000 : $0.0396
8,000 : $0.0402
6,000 : $0.042
4,000 : $0.0451
2,000 : $0.0549
1,000 : $0.0665
500 : $0.0788
100 : $0.1127
10 : $0.169
1 : $0.19
1,784
C120902

 Jbc Tools Tip; bent conical; 0.3x3mm
4 : $44.2
1 : $47.35
62
SMM02040C1209FB000

 Vishay Intertechnologies Resistor: metal film; 12Ω; SMD; 400mW; ±1%; 200V; Ø1.4x3.6mm
RoHS : Compliant
10,000 : $0.0209
0
MBA0204VC1209FCT00

 Vishay Intertechnologies Resistor: metal film; 12Ω; THT; 400mW; ±1%; V; 200V; Ø0.5x29mm; axial
RoHS : Compliant
5,000 : $0.0245
0
MMA02040C1209FB000

 Vishay Intertechnologies Resistor: metal film; 12Ω; SMD; 400mW; ±1%; 200V; Ø1.4x3.6mm
RoHS : Compliant
240,000 : $0.0159
120,000 : $0.018
100,000 : $0.0186
70,000 : $0.0198
50,000 : $0.0209
30,000 : $0.0229
20,000 : $0.0246
10,000 : $0.0278
0
SMM02070C1209FBP00

 Vishay Intertechnologies Resistor: metal film; 12Ω; SMD; 1W; ±1%; 350V; Ø2.2x5.8mm; -55÷155°C
RoHS : Compliant
36,000 : $0.0526
18,000 : $0.0582
15,000 : $0.0605
12,000 : $0.0627
7,500 : $0.066
4,500 : $0.0716
3,000 : $0.075
1,500 : $0.0817
0
MBB02070C1209FCT00

 Vishay Intertechnologies Resistor: metal film; 12Ω; THT; 600mW; ±1%; 350V; Ø2.5x6.5mm
RoHS : Compliant
200,000 : $0.0189
100,000 : $0.0196
50,000 : $0.0218
40,000 : $0.0227
30,000 : $0.024
25,000 : $0.0247
20,000 : $0.0257
15,000 : $0.0271
10,000 : $0.0292
5,000 : $0.0331
0
MCT06030C1209DP500

 Vishay Intertechnologies Resistor: thin film; 12Ω; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V
RoHS : Compliant
5,000 : $0.0249
0
MCT06030C1209DPW00

 Vishay Intertechnologies Resistor: thin film; 12Ω; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V
RoHS : Compliant
20,000 : $0.0249
0
MCT06030C1209FPW00

 Vishay Intertechnologies Resistor: thin film; 12Ω; SMD; 0603; 0.125W; ±1%; MCT0603; 0; 75V
RoHS : Compliant
20,000 : $0.016
0
AM1DC-1209DH60Z

 Aimtec Converter: DC/DC; 1W; Uin: 10.8÷13.2VDC; Uout: 9VDC; Uout2: -9VDC
RoHS : Compliant
40 : $7.79
20 : $8.39
10 : $8.99
1 : $9.58
0
MC12093DR2G

 onsemi IC: digital; Ch: 1; ECL; SMD; SOIC8; -40÷85°C; 2.7÷5.5V
RoHS : Compliant
2,500 : $3.31
0
MBA02040C1209FC100

 Vishay Intertechnologies Resistor: metal film; 12Ω; THT; 400mW; ±1%; 0; 200V; Ø0.5x29mm; axial
RoHS : Compliant
1,000 : $0.188
0
MC12093DG

 onsemi IC: digital; Ch: 1; ECL; SMD; SOIC8; -40÷85°C; 2.7÷5.5V
RoHS : Compliant
10 : $5.4
1 : $5.77
0

ComSIT USA		SMM02070C1209FBP

 Vishay Intertechnologies THIN FILM MELF RESISTOR Fixed Resistor, Thin Film, 1W, 12ohm, 350V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 2309
RoHS : Compliant
3,000
MC12093DR2G

 onsemi DIVIDE BY 2, 4, 8 1.1 GHZ LOW POWER PRESCALER WITH STAND-BY MODE Prescaler, ECL Series, 1-Func, ECL, PDSO8
RoHS : Compliant
1,995
SMM02040C1209FB300

 Vishay Intertechnologies THIN FILM MINI- MELF RESISTOR Fixed Resistor, Thin Film, 0.25W, 12ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1406
RoHS : Compliant
325

Richardson RFPD		DC1209A

 Analog Devices Inc LT3060EDC Linear Regulator 1.164V to 1.236V/1.455V
RoHS : Compliant
19 : $121.38
0

Rutronik		MMA02040C1209FB300

 Vishay Intertechnologies MM0204 12R 1% 0,4W TK50
RoHS : Compliant
3,000 : $0.0311
6,000 : $0.0309
12,000 : $0.0306
18,000 : $0.0304
33,000 : $0.0301
27,000

Avnet Abacus		SMM02040C1209FB300

 Vishay Intertechnologies - Tape and Reel (Alt: SMM02040C1209FB300)
RoHS : Compliant
96,000
MMB02070C1209FB200

 Vishay Intertechnologies - Tape and Reel (Alt: MMB02070C1209FB200)
RoHS : Compliant
2,000
AM1DC-1209DH60Z

 Aimtec Isolated Through Hole DCDC Converter Household ITE 1 W 2 Outputs Fixed 9 V 5556 mA 9 V (Alt: AM1DC-1209DH60Z)
RoHS : Compliant
0
AM1DC-1209SH60Z

 Aimtec Isolated Through Hole DCDC Converter Household ITE 1 W 1 Output Fixed 9 V 11111 mA (Alt: AM1DC-1209SH60Z)
RoHS : Compliant
0
MRS25000C1209FRP00

 Vishay Intertechnologies MRS2550 1 RP 12R - Tape and Reel (Alt: MRS25000C1209FRP00)
RoHS : Compliant
0
MMA0204AC1209FB100

 Vishay Intertechnologies Surface Mount MELF Resistor 12 Ohm 1 250 mW 0204 3715 Metric Thin Film - Tape and Reel (Alt: MMA0204AC1209FB100)
RoHS : Compliant
0
MCU08050C1209FP500

 Vishay Intertechnologies - Tape and Reel (Alt: MCU08050C1209FP500)
RoHS : Compliant
0
MBA02040C1209FCT00

 Vishay Intertechnologies MBASMA 020450 1 CT 12R - Tape and Reel (Alt: MBA02040C1209FCT00)
RoHS : Compliant
0
SMM0204VC1209FB300

 Vishay Intertechnologies - Tape and Reel (Alt: SMM0204VC1209FB300)
RoHS : Compliant
0
SMM02070C1209FBS00

 Vishay Intertechnologies - Tape and Reel (Alt: SMM02070C1209FBS00)
RoHS : Compliant
0
MMA02040C1209FB000

 Vishay Intertechnologies - Tape and Reel (Alt: MMA02040C1209FB000)
RoHS : Compliant
0
MCS04020C1209FE000

 Vishay Intertechnologies - Tape and Reel (Alt: MCS04020C1209FE000)
RoHS : Compliant
0
SMM02070C1209FBP00

 Vishay Intertechnologies Surface Mount MELF Resistor 12 ohm SMM Series 350 V Thin Film 1 W 1 - Tape and Reel (Alt: SMM02070C1209FBP00)
RoHS : Compliant
0
MMA02040C1209FB300

 Vishay Intertechnologies Surface Mount MELF Resistor 12 ohm MMA Series 200 V Metal Film 250 mW 1 - Tape and Reel (Alt: MMA02040C1209FB300)
RoHS : Compliant
0
MRS16000C1209FCT00

 Vishay Intertechnologies MRS1650 1 CT 12R - Tape and Reel (Alt: MRS16000C1209FCT00)
RoHS : Compliant
0

Avnet Asia		MC12093MNR4G

 onsemi (Alt: MC12093MNR4G)
RoHS : Compliant
0
MMB02070C1209FB200

 Vishay Intertechnologies (Alt: MMB02070C1209FB200)
RoHS : Compliant
0

Avnet Silica		MC12093DG

 onsemi 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093DG)
RoHS : Compliant
0
MC12093DR2G

 onsemi 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093DR2G)
RoHS : Compliant
0
MC12093MNR4G

 onsemi 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093MNR4G)
RoHS : Compliant
0
C12095_MINNIE-M

 LEDIL REFLECTOR ROUND 1 POS 324MM OD 1475MM H (Alt: C12095_MINNIE-M)
RoHS : Compliant
0
C12097_MINNIE-WWW

 LEDIL REFLECTOR ROUND 1 POS 324MM OD 1475MM H (Alt: C12097_MINNIE-WWW)
RoHS : Compliant
0
C12095_MINNIE-M-MTG

 LEDIL LED REFLECTOR CREE LED MTG REFLECTOR INNER DIAMETER128MM REFLECTOR OVERALL HEIGHT1475MM RE (Alt: C12095_MINNIE-M-MTG)
RoHS : Compliant
0

Braemac Americas-Symmetry		AM1DC-1209DH60Z

 Aimtec
RoHS : Compliant
1 : $8.55
0
AM1DC-1209SH60Z

 Aimtec
RoHS : Compliant
1 : $8.13
0

Component Electronics, Inc		MC12095D

 onsemi IN STOCK SHIP TODAY
RoHS : Not Compliant
1,000 : $2.5
100 : $2.88
1 : $3.85
32
MC12093D

 onsemi IN STOCK SHIP TODAY
RoHS : Not Compliant
1,000 : $2.5
100 : $2.88
1 : $3.85
4

EBV Elektronik		MC12093DG

 onsemi 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093DG)
RoHS : Compliant
0
MC12093DR2G

 onsemi 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093DR2G)
RoHS : Compliant
0
MC12093MNR4G

 onsemi 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093MNR4G)
RoHS : Compliant
0
C12095_MINNIE-M

 LEDIL REFLECTOR ROUND 1 POS 324MM OD 1475MM H (Alt: C12095_MINNIE-M)
RoHS : Compliant
0
C12097_MINNIE-WWW

 LEDIL REFLECTOR ROUND 1 POS 324MM OD 1475MM H (Alt: C12097_MINNIE-WWW)
RoHS : Compliant
0

FDH Electronics		C120902

 Jbc Tools Placeholder
2

Flip Electronics		MC12093DG

 onsemi Stock, Ship Today
RoHS : Compliant
1 : $2.38
1,176

Master Electronics		DSC-1209

 Quest Technology International Inc Conn D-Subminiature SKT 9 POS Solder ST Thru-Hole 9 Terminal 1 Port
RoHS : Compliant
30 : $0.772
20 : $0.831
10 : $0.833
1,600
SRK-SC-120-95-601

 TE Connectivity Socket Size 12Mm 95Mm2 Silver/Te Connectivity/Deutsch |Deutsch Te Connectivity SRK-SC-120-95-601
RoHS : Compliant
70 : $19.03
20 : $19.8
4 : $20.58
0
NBC-R4AC1/2-0-94G/R4AC1-BU

 Phoenix Contact Patch cable - degree of protection: IP20 - cable length: 2 m - number of positions: 8 - 10 Gbps - CAT6A
RoHS : Compliant
5 : $29.82
1 : $31.39
0
NBC-R4AC1/2-0-94G/R4AC1-YE

 Phoenix Contact Patch cable - degree of protection: IP20 - cable length: 2 m - number of positions: 8 - 10 Gbps - CAT6A
RoHS : Compliant
5 : $33.74
1 : $35.52
0
MC12093MNR4G

 onsemi ÷·2 ÷·4 ÷·8 1.1 GHz Low Power Prescaler
RoHS : Compliant
1,000 : $2.75
750 : $2.81
500 : $3.55
250 : $5.76
0
MC12093DG

 onsemi ÷·2 ÷·4 ÷·8 1.1 GHz Low Power Prescaler
RoHS : Compliant
2,548 : $4.49
1,078 : $4.5
588 : $4.52
294 : $4.53
196 : $4.55
98 : $4.58
25 : $4.83
5 : $6.77
0

Pasternack Enterprises US		PE3C1209-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209-24 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax.
1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6
0
PE3C1209/HS-36

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-36 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-36 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55
0
PE3C1209/HS

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Male Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
0
PE3C1209/HS-60

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-60 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-60 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45
0
PE3C1209LF/HS

 Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C1209LF/HS is a SMA female bulkhead to SMA male cable using LMR-195 coax. This Pasternack SMA female bulkhead to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1209LF/HS SMA female bulkhead to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3C1209-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209-12 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 12 inch length using LMR-195 coax.
1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6
0
PE3C1209LF

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Low Loss Cable Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to SMA female bulkhead low loss cable using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable using LMR-195 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209LF can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209LF is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209LF can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable using LMR-195 coax, LF solder.
0
PE3C1209LF-36

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 36 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 36 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 36 inch length using LMR-195 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209LF-36 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209LF-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209LF-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 36 inch length using LMR-195 coax, LF solder.
1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0
0
PE3C1209LF-60

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 60 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 60 inch length using LMR-195 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209LF-60 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209LF-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209LF-60 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 60 inch length using LMR-195 coax, LF solder.
1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76
0
PE3C1209LF-48

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 48 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 48 inch length using LMR-195 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209LF-48 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209LF-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209LF-48 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 48 inch length using LMR-195 coax, LF solder.
1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81
0
PE3C1209/HS-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-12 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-12 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-12 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86
0
PE3C1209

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Low Loss Cable Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable using LMR-195 coax.
0
PE3C1209/HS-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-24 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-24 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61
0
PE3C1209-48

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209-48 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209-48 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 48 inch length using LMR-195 coax.
1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35
0
PE3C1209LF-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209LF-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209LF-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209LF-24 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax, LF solder.
1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06
0

Vyrian		MC12095DR2G

 onsemi Prescaler, ECL Series, 1-Func, PDSO8
RoHS : Compliant
12,804
DC1209A

 Analog Devices Inc
RoHS : Compliant
11,236
MC12095MNR4G

 onsemi Prescaler, ECL Series, 1-Func
RoHS : Compliant
10,478
DAC1209LCJ

 Texas Instruments D/A Converter, 1 Func, Parallel, Word Input Loading, 1us Settling Time, CDIP24
5,369
MC12095DG

 onsemi Prescaler, ECL Series, 1-Func, PDSO8
RoHS : Compliant
4,481
MC12095D

 NXP Semiconductors Prescaler, ECL Series, 1-Func, PDSO8
2,268

Win Source Electronics		MC12093DR2G

 onsemi /2,/4,/8 1.1 GHz Low Power Prescaler with Stand-By Mode
RoHS : Compliant
86 : $4.5276
69 : $4.7164
53 : $4.905
37 : $5.2823
24 : $5.4709
12 : $5.8481
4,610
MC12093DR2

 onsemi IC PRESCALER 2/4/8 1.1GHZ 8-SOIC
RoHS : Not Compliant
69 : $4.3807
52 : $4.8861
40 : $5.0546
29 : $5.2231
19 : $5.3916
8 : $6.571
401

Wuhan P&S		MMB02070C1209FB200

 Vishay Intertechnologies Professional Thin Film MELF Resistors
RoHS : Compliant
1 : $0.53
100 : $0.18
500 : $0.17
1,000 : $0.16
150,000

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com