 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C-3111-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | PIMC31,115 | Nexperia | Transistor: NPN / PNP; bipolar; BRT; 50V; 0.5A; 0.42W RoHS : Compliant |
| 0 | |
 Avnet Americas | SC3111ESX | onsemi | External DC 2~5V referenced input, single non-inverting output, peak 1.4A sink - Bulk (Alt: SC3111ESX) RoHS : Not Compliant | 0 | ||
| MBA02040C3111FC100 | Vishay Intertechnologies | MBA/SMA 0204-50 1% C1 3K11 - Ammo Pack (Alt: MBA02040C3111FC100) RoHS : Not Compliant |
| 0 | ||
| DSC31111DMIM | Pulse Electronics Corporation | - Trays (Alt: DSC31111DMIM) RoHS : Compliant | 0 | |||
| FCH-FGC3111 | Omega Engineering | CONVECTION HEATERS - Bulk (Alt: FCH-FGC3111) RoHS : Compliant |
| 0 | ||
| DSC31111DM | Pulse Electronics Corporation | - Trays (Alt: DSC31111DM) RoHS : Compliant | 0 | |||
| PIMC31,115 | Nexperia | Trans Digital BJT NPN/PNP 50V 0.5mA 6-Pin TSOP T/R - Tape and Reel (Alt: PIMC31,115) RoHS : Compliant |
| 0 | ||
| RLR05C3111FRB14 | Vishay Intertechnologies | Through Hole Resistor, 3.11 kohm, RLR Series, 125 mW, ? 1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RLR05C3111FRB14) RoHS : Not Compliant |
| 0 | ||
 Newark | DILAC-31(110V50HZ,120V60HZ) | Eaton Corporation | Contactor, Dilac-31(110V50Hz,120V60Hz); |Eaton Moeller DILAC-31(110V50HZ,120V60HZ) RoHS : Not Compliant |
| 1 | |
| FCH-FGC3111 | Omega Engineering | Cirrus 60 200/300/400W 230V 24; |Omega FCH-FGC3111 RoHS : Not Compliant |
| 0 | ||
| PIMC31,115 | Nexperia | Trans Bip, Npn, Pnp, 50V, 50V; |Nexperia PIMC31,115 RoHS : Compliant |
| 0 | ||
| LTC3111IDE#PBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 900Khz; |Analog Devices, Inc. LTC3111IDE#PBF RoHS : Compliant |
| 0 | ||
| LTC3111EDE#PBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 800Khz; |Analog Devices, Inc. LTC3111EDE#PBF RoHS : Compliant |
| 0 | ||
| LTC3111HMSE#PBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 800Khz; |Analog Devices, Inc. LTC3111HMSE#PBF RoHS : Compliant |
| 0 | ||
| LTC3111IMSE#PBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 800Khz; |Analog Devices, Inc. LTC3111IMSE#PBF RoHS : Compliant |
| 0 | ||
| LTC3111EMSE#PBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 800Khz; |Analog Devices, Inc. LTC3111EMSE#PBF RoHS : Compliant |
| 0 | ||
| LTC3111EDE#TRPBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 800Khz; |Analog Devices, Inc. LTC3111EDE#TRPBF RoHS : Compliant |
| 0 | ||
| LTC3111EDE#TRPBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck-Boost, 800Khz; |Analog Devices, Inc. LTC3111EDE#TRPBF RoHS : Compliant |
| 0 | ||
| DILAC-31(110V50HZ,120V60HZ) | Eaton Corporation | Relay, 3N/O 1N/C, Contactor Type; |Eaton Moeller DILAC-31(110V50HZ,120V60HZ) RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | LTC3111IMSE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 8,362 | |
| LTC3111HMSE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 7,400 | ||
| LTC3111MPDE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 5,000 | ||
| LTC3111MPDE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 644 | ||
| LTC3111IDE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 4 | ||
| LTC3111MPMSE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 3 | ||
| LTC3111IMSE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111EMSE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111EDE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111HMSE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111IDE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111HDE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111MPMSE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111EMSE#PBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
| LTC3111HDE#TRPBF | Analog Devices Inc | 15V, 1.5A Sync Buck-Boost DC/D RoHS : Compliant |
| 0 | ||
 RS | UC-3111-T-US-LX | Moxa Inc | ARM COMPUTER, US REGION, LTE CAT 1,802.11 A/B/G/N,2 LAN PORTS,2 SERIAL PORTS |
| 73 | |
| DWC-3111-1 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 2IN |
| 0 | ||
| PFC-3111 | Bimba Manufacturing Company | CYLINDER, POSITION FEEDBACK, 2IN BORE; STROKE: 11IN |
| 0 | ||
| DWC-311-1V | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 2IN |
| 0 | ||
| DWC-3111-2S | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 2IN |
| 0 | ||
| PC-3111-DQW | Bimba Manufacturing Company | CYLINDER, O.L., PLASTIC END CAPS; 2IN BORE; STROKE: 11IN; F NOSE, S PT REAR HEA |
| 0 | ||
| PC-3111-DXPV | Bimba Manufacturing Company | CYLINDER, O.L., PLASTIC END CAPS; 2IN BORE; STROKE: 11IN; UNIV DBL END OR REAR |
| 0 | ||
| PC-3111-DXPW | Bimba Manufacturing Company | CYLINDER, O.L., PLASTIC END CAPS; 2IN BORE; STROKE: 11IN; UNIV DBL END OR REAR |
| 0 | ||
| DWMNC-311-1 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, MAGNETIC POSITION SENSING M; NOS |
| 0 | ||
| DWC-311.125-2 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 2IN |
| 0 | ||
| DWMC-3111-5CSR | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, MAGNETIC POSITION SENSING M; CUS |
| 0 | ||
| PC-3111-DCMT1W | Bimba Manufacturing Company | CYLINDER, O.L., PLASTIC END CAPS; 2IN BORE; STROKE: 11IN; F NOSE, CUSHIONS BOTH |
| 0 | ||
| DWC-3111.125-1 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 2IN |
| 0 | ||
| P-58-DWC-3111-4 | Bimba Manufacturing Company | P-58 - PISTON ROD ASSEMBLY; STANDARD SINGLE END ROD DW; CUSHION - BOTH ENDS |
| 0 | ||
| PC-3111-DCMT2T3 | Bimba Manufacturing Company | CYLINDER, O.L., PLASTIC END CAPS; 2IN BORE; STROKE: 11IN; F NOSE, CUSHIONS BOTH |
| 0 | ||
 Rochester Electronics | PIMC31,115 | Nexperia | 500 mA, 50V NPN/PNP double resistor-equipped transistor RoHS : Compliant |
| 3,230 | |
 Sager | T101-5C3-111-L1 | Grayhill Inc | Encoders ASM,MTRE,50MM,RED,32POS,LOW,PBhread | 0 | ||
| T101-5C3-111-H1 | Grayhill Inc | Encoders ASM,MTRE,50MM,RED,32POS,HI,PB hread | 0 | |||
| T101-5C3-111-M1 | Grayhill Inc | Encoders ASM,MTRE,50MM,RED,32POS,MED,PBhread | 0 | |||
 Interstate Connecting Components | RC3111A8-4S | Amphenol Aerospace | CONNECTOR | 0 | ||
 PEI Genesis | SE11C3111-2.0-12S | SOURIAU-SUNBANK |
| 0 | ||
 Avnet Silica | PIMC31,115 | Nexperia | Trans Digital BJT NPNPNP 50V 05mA 6Pin TSOP TR (Alt: PIMC31,115) RoHS : Compliant | 96,000 | ||
 FDH Electronics | RC3111A8-3SX | FDH Electronics | Connector 26482 | 226 | ||
 Flip Electronics | SC3111ESX | onsemi | Stock, Ship Today |
| 3,000 | |
 Master Electronics | T101-5C3-111-M1 | Grayhill Inc | Optical Encoder Rotary Incremental Straight Digital Square Wave Panel Mount 8CPR RoHS : Compliant |
| 0 | |
 Neutron USA | UC-3111-T-US-LX | Moxa Inc | RISC-based computer for US (AT&T), LTE, WiFi, 1 GHz CPU, 512MB RAM, 4GB eMMC, 2 Ethernet, 2 serial, 1 SD slot, 1 USB, Op: -30 to 70°C |
| 50 | |
| UC-3111-T-US-LX-NW | Moxa Inc | Arm-based wireless-enabled DIN-rail ind computer, wide op temp, 2 serial, 2 LAN, CAT.1 LTE Mod for US built-in and Linux, w/o WiFi, BLT |
| 0 | ||
 Pasternack Enterprises US | PE3C3111 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Low Loss Cable Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | ||
| PE3C3111-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. UHF Male to UHF Male Low Loss Cable 36 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 36 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 36 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-36 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-36 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-36 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3111-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. UHF Male to UHF Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-180 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3111-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. UHF Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-12 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-12 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3111-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. UHF Male to UHF Male Low Loss Cable 48 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 48 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 48 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-48 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-48 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3111-240 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. UHF Male to UHF Male Low Loss Cable 240 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 240 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 240 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-240 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-240 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-240 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Vyrian | LTC3111MPMSE-PBF | Analog Devices Inc | 870 | |||
| LTC3111MPMSE-TRPBF | Analog Devices Inc | 840 | ||||
| LTC3111EMSE#PBF | Analog Devices Inc | Switching Regulator, Voltage-mode, 1500kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 840 | |||
| LTC3111IMSE#TRPBF | Linear Technology | Switching Regulator, Voltage-mode, 1500kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 810 | |||
| LTC3111MPDE-TRPBF | Analog Devices Inc | 770 | ||||
| LTC3111HDE-PBF | Analog Devices Inc | 730 | ||||
| LTC3111MPDE-PBF | Analog Devices Inc | 710 | ||||
| LTC3111IDE-TRPBF | Analog Devices Inc | 700 | ||||
| LTC3111EMSE#TRPBF | Analog Devices Inc | Switching Regulator, Voltage-mode, 1500kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 680 | |||
| LTC3111EMSE-PBF | Analog Devices Inc | 470 | ||||
| LTC3111EDE-TRPBF | Analog Devices Inc | 450 | ||||
| TLV320AIC3111EVM-K | Texas Instruments | Development kits/Accessories RoHS : Compliant | 400 | |||
| LTC3111EMSE-TRPBF | Analog Devices Inc | 380 | ||||
TLV320AIC3111IRHBT | Texas Instruments | Audio Amplifier, 1.29W, 2 Channel(s), 1 Func, PQCC32 RoHS : Compliant | 360 | |||
| TLV320AIC3111IRHBR | Texas Instruments | Audio Amplifier, 1.29W, 2 Channel(s), 1 Func, PQCC32 RoHS : Compliant | 210 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand