| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
TME | CAT10-203J4LF
| Bourns Inc | Resistor network: Y; 20kΩ; ±5%; No.of resistors: 4; 62.5mW; SMD
RoHS : Compliant | | 20,000
 |
66 AT10 20-200ZA
| OPTIBELT GmbH | Belt pulley; AT10; W: 50mm; whell width: 66mm; Ø: 61.8mm; aluminium | 50 : $13.95
10 : $15.88
1 : $17.32
|
| 2
|
47 AT10 20-200ZA
| OPTIBELT GmbH | Belt pulley; AT10; W: 32mm; whell width: 47mm; Ø: 61.8mm; aluminium | 50 : $9.3
10 : $10.64
1 : $11.6
|
| 0
 |
50 AT10 / 2000 AFX
| OPTIBELT GmbH | Timing belt; AT10; W: 50mm; Lw: 2000mm; polyurethane; metric | 5 : $415.18
3 : $444.83
1 : $474.48
|
| 0
|
25 AT10 / 2000 AFX
| OPTIBELT GmbH | Timing belt; AT10; W: 25mm; Lw: 2000mm; polyurethane; metric | 5 : $213.35
3 : $228.59
1 : $243.83
|
| 0
|
32 AT10 / 2000 AFX
| OPTIBELT GmbH | Timing belt; AT10; W: 32mm; Lw: 2000mm; polyurethane; metric | 5 : $283.76
3 : $304.02
1 : $324.28
|
| 0
|
16 AT10 / 2000 AFX
| OPTIBELT GmbH | Timing belt; AT10; W: 16mm; Lw: 2000mm; polyurethane; metric | 5 : $146.44
3 : $156.9
1 : $168.41
|
| 0
|
Avnet Americas | HTWAT102-010
| Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-010)
RoHS : Compliant | | 0
|
CAT10-202J4LF
| Bourns Inc | - Tape and Reel (Alt: CAT10-202J4LF)
RoHS : Compliant | 160,000 : $0.012
80,000 : $0.01206
40,000 : $0.01213
20,000 : $0.01219
10,000 : $0.01389
|
| 0
|
CAT10-203J4LF
| Bourns Inc | - Tape and Reel (Alt: CAT10-203J4LF)
RoHS : Compliant | 160,000 : $0.012
80,000 : $0.01206
40,000 : $0.01213
20,000 : $0.01219
10,000 : $0.01389
|
| 0
|
HTWAT102-002
| Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-002)
RoHS : Compliant | | 0
|
HTWAT102-008
| Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-008)
RoHS : Compliant | | 0
|
HTWAT102-006
| Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-006)
RoHS : Compliant | | 0
|
HTWAT102-004
| Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-004)
RoHS : Compliant | | 0
|
CAT10-200J4LF
| Bourns Inc | - Tape and Reel (Alt: CAT10-200J4LF)
RoHS : Compliant | 160,000 : $0.01362
80,000 : $0.01369
40,000 : $0.01376
20,000 : $0.01383
10,000 : $0.0139
|
| 0
|
Mouser Electronics | CAT10-203J4LF
| Bourns Inc | Resistor Networks & Arrays 20K
RoHS : Compliant | 1 : $0.1
10 : $0.058
25 : $0.043
100 : $0.037
250 : $0.029
500 : $0.026
1,000 : $0.023
10,000 : $0.021
|
| 36,438
|
CAT10-202J4LF
| Bourns Inc | Resistor Networks & Arrays 2K
RoHS : Compliant | 1 : $0.1
10 : $0.042
25 : $0.031
100 : $0.028
250 : $0.024
500 : $0.021
1,000 : $0.019
5,000 : $0.015
10,000 : $0.013
|
| 18,027
|
CAT10-200J4LF
| Bourns Inc | Resistor Networks & Arrays 20 ohm
RoHS : Compliant | 1 : $0.21
10 : $0.091
25 : $0.067
100 : $0.037
250 : $0.029
500 : $0.024
1,000 : $0.021
5,000 : $0.017
10,000 : $0.014
|
| 0
|
Newark | HTWAT102-010
| Omega Engineering | Heater, Surface, Tape, Htwat; |Omega HTWAT102-010
RoHS : Compliant | | 0
|
HTWAT102-002
| Omega Engineering | Heater, Surface, Tape, Htwat; |Omega HTWAT102-002
RoHS : Compliant | | 0
|
HTWAT102-008
| Omega Engineering | Heater, Surface, Tape, Htwat; |Omega HTWAT102-008
RoHS : Compliant | | 0
|
HTWAT102-006
| Omega Engineering | Heater, Surface, Tape, Htwat; |Omega HTWAT102-006
RoHS : Compliant | | 0
|
HTWAT102-004
| Omega Engineering | Heater, Surface, Tape, Htwat; |Omega HTWAT102-004
RoHS : Compliant | | 0
|
CAT10-202J4LF
| Bourns Inc | Resistor Network, thick Film,2Kohms,25Wv,; |Bourns, Inc. CAT10-202J4LF
RoHS : Compliant | 10,000 : $0.015
20,000 : $0.014
30,000 : $0.013
50,000 : $0.012
100,000 : $0.011
250,000 : $0.01
|
| 0
|
CAT10-203J4LF
| Bourns Inc | Resistor Network, thick Film,20Kohms,25Wv; |Bourns, Inc. CAT10-203J4LF
RoHS : Compliant | 10,000 : $0.023
20,000 : $0.022
30,000 : $0.021
50,000 : $0.02
100,000 : $0.019
250,000 : $0.018
|
| 0
|
CAT10-200J4LF
| Bourns Inc | Resistor Network, thick Film,20Ohms,25Wv,; |Bourns, Inc. CAT10-200J4LF
RoHS : Compliant | 10,000 : $0.027
20,000 : $0.023
30,000 : $0.019
50,000 : $0.017
100,000 : $0.016
250,000 : $0.015
|
| 0
|
RS | 42AT10/20-2
| B&B Electronics Manufacturing Company | TIMING PULLEY, 2.51'' PD, 2.43'' OD, 12 MM PLAIN BORE, ALUMINUM | 1 : $64.15
10 : $60.94
25 : $57.74
50 : $54.53
|
| 0
|
47AT10/20-2
| B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 20 TEETH, FOR BELT WIDTH 32MM, ALUMINUM | | 0
|
66AT10/20-2
| B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 20 TEETH, FOR BELT WIDTH 50MM, ALUMINUM | | 0
|
31AT10/20-2
| B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 20 TEETH, FOR BELT WIDTH 16MM, ALUMINUM | 1 : $52.99
10 : $50.34
25 : $47.69
50 : $45.04
|
| 0
|
CAT10-202J4LF
| Bourns Inc | RESARRAY 4X0402 2K 5% 63MW CONCAVETAPE & REEL - 7 REEL
RoHS : Compliant | 10,000 : $0.02
50,000 : $0.022
100,000 : $0.021
|
| 0
|
CAT10-203J4LF
| Bourns Inc | RESARRAY 4X0402 20K 5% 63MW CONCAVETAPE & REEL - 7 REEL
RoHS : Compliant | 10,000 : $0.02
50,000 : $0.022
100,000 : $0.021
|
| 0
|
CAT10-200J4LF
| Bourns Inc | RESARRAY 4X0402 20R 5% 63MW CONCAVETAPE & REEL - 7 REEL
RoHS : Compliant | 10,000 : $0.02
50,000 : $0.014
100,000 : $0.014
|
| 0
|
EMC-P6-A-T10-20
| Nachi America | Power Amplifier, electro-hydraulic | | 0
|
EMC-PC6-A-T10-20
| Nachi America | Power Amplifier, electro-hydraulic | | 0
|
Onlinecomponents.com | AT-1020-MX-D2
| Sealcon USA | ADAPTER, 1NPT , M20X1.5, N
RoHS : Compliant | 1,000 : $18.66
500 : $20.38
100 : $21.24
50 : $22.36
25 : $22.96
10 : $24.17
5 : $25.44
1 : $27.36
|
| 0
|
AT-1020(40)
| Hirose Electric Co Ltd | MIL & IEC Standard SMA Type Connectors (Fixed Attenuator)
RoHS : Compliant | 5 : $386.3
3 : $443.05
1 : $449.3
|
| 0
|
Sager | AT-1020(BOX)(40)
| Hirose Electric Co Ltd | Attenuators - Interconnects LP ATTENUATOR 20DB | | 0
|
Avnet Abacus | CAT10-202J4LF
| Bourns Inc | Resistor Array 2 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-202J4LF)
RoHS : Compliant | | 0
|
CAT10-203J4LF
| Bourns Inc | Resistor Array 20 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-203J4LF)
RoHS : Compliant | | 0
|
CAT10-200J4LF
| Bourns Inc | Resistor Array 20 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-200J4LF)
RoHS : Compliant | | 0
|
Master Electronics | CAT10-202J4LF
| Bourns Inc | Res Thick Film Array 2K Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R
RoHS : Compliant | 500,000 : $0.0082
250,000 : $0.0085
150,000 : $0.0087
100,000 : $0.009
50,000 : $0.0093
30,000 : $0.0097
10,000 : $0.0167
|
| 0
|
CAT10-203J4LF
| Bourns Inc | Res Thick Film Array 20K Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R
RoHS : Compliant | 500,000 : $0.0082
250,000 : $0.0085
150,000 : $0.0087
100,000 : $0.009
50,000 : $0.0093
30,000 : $0.0097
9,260 : $0.0167
|
| 0
|
CAT10-200J4LF
| Bourns Inc | Res Thick Film Array 20 Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R
RoHS : Compliant | 500,000 : $0.0082
250,000 : $0.0085
150,000 : $0.0087
100,000 : $0.009
50,000 : $0.0093
30,000 : $0.0097
10,000 : $0.0167
|
| 0
|
Pasternack Enterprises US | PEWAT1020-30
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 30 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 30 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-30 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-30 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-30 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-30 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 30 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements. | 1 : $1,110.0
5 : $1,065.6
10 : $1,021.2
25 : $976.8
|
| 3
|
PEWAT1020-20
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 20 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 20 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-20 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-20 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-20 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-20 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 20 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements. | 1 : $1,110.0
5 : $1,065.6
10 : $1,021.2
25 : $976.8
|
| 3
|
PEWAT1020-10
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 10 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-10 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-10 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-10 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-10 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements. | 1 : $1,110.0
5 : $1,065.6
10 : $1,021.2
25 : $976.8
|
| 1
|
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand