| Electronic Components Datasheet Search |
|
AT-102 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 16 AT10 / 2100 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 16mm; Lw: 2100mm; polyurethane; metric |
| 0 | |
| 31 AT10 27-200ZA | OPTIBELT GmbH | Belt pulley; AT10; W: 16mm; whell width: 31mm; Ø: 84.1mm; aluminium |
| 0 | ||
| 32 AT10 / 2100 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 32mm; Lw: 2100mm; polyurethane; metric |
| 0 | ||
| 50 AT10 / 2900 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 50mm; Lw: 2900mm; polyurethane; metric |
| 0 | ||
| DA ETIMAT 10 230V AC/DC | ETI Polam | Shunt release; for DIN rail mounting; 230VAC; 230VDC; 1÷25mm2 |
| 0 | ||
| ETIMAT 10 2P D1 | ETI Polam | Circuit breaker; 230/400VAC; Inom: 1A; Poles: 2; Charact: D; 10kA |
| 0 | ||
| ETIMAT 10 2P D25 | ETI Polam | Circuit breaker; 230/400VAC; Inom: 25A; Poles: 2; Charact: D; 10kA |
| 0 | ||
| ETIMAT 10 2P C6 | ETI Polam | Circuit breaker; 230/400VAC; Inom: 6A; Poles: 2; Charact: C; 10kA |
| 0 | ||
| ETIMAT 10 2P D1,6 | ETI Polam | Circuit breaker; 230/400VAC; Inom: 1.6A; Poles: 2; Charact: D; 10kA |
| 0 | ||
| 25 AT10 / 2800 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 25mm; Lw: 2800mm; polyurethane; metric |
| 0 | ||
| 50 AT10 / 2100 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 50mm; Lw: 2100mm; polyurethane; metric |
| 0 | ||
| 66 AT10 22-200ZA | OPTIBELT GmbH | Belt pulley; AT10; W: 50mm; whell width: 66mm; Ø: 68.15mm; aluminium |
| 0 | ||
| 50 AT10 / 2500 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 50mm; Lw: 2500mm; polyurethane; metric |
| 0 | ||
| ETIMAT 10 2P C0,5 | ETI Polam | Circuit breaker; 230/400VAC; Inom: 0.5A; Poles: 2; Charact: C; 10kA |
| 0 | ||
| ETIMAT 10 2P C40 | ETI Polam | Circuit breaker; 230/400VAC; Inom: 40A; Poles: 2; Charact: C; 10kA |
| 0 | ||
![]() Avnet Americas | CAT10-240J4LF | Bourns Inc | - Tape and Reel (Alt: CAT10-240J4LF) RoHS : Compliant |
| 10,000 | |
| CAT10-221J4LF | Bourns Inc | - Tape and Reel (Alt: CAT10-221J4LF) RoHS : Compliant |
| 10,000 | ||
CAT1025WI-42-GT3![]() | onsemi | EEPROM Serial 2-Kb CPU Supervisor - Tape and Reel (Alt: CAT1025WI-42-GT3) RoHS : Not Compliant |
| 0 | ||
CAT1025WI-28-GT3![]() | onsemi | EEPROM Serial 2-Kb CPU Supervisor - Tape and Reel (Alt: CAT1025WI-28-GT3) RoHS : Not Compliant |
| 0 | ||
CAT1021WI-45-GT3![]() | onsemi | EEPROM Serial 2-Kb I2C CPU Supervisor - Tape and Reel (Alt: CAT1021WI-45-GT3) RoHS : Not Compliant |
| 0 | ||
CAT1026WI-28-GT3![]() | onsemi | - Tape and Reel (Alt: CAT1026WI-28-GT3) RoHS : Not Compliant |
| 0 | ||
CAT1027WI-45-GT3![]() | onsemi | - Tape and Reel (Alt: CAT1027WI-45-GT3) RoHS : Not Compliant |
| 0 | ||
| HTWAT102-010 | Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-010) RoHS : Compliant |
| 0 | ||
| CAT10-270J4LF | Bourns Inc | - Tape and Reel (Alt: CAT10-270J4LF) RoHS : Compliant |
| 0 | ||
CAT1024ZI-28-GT3![]() | onsemi | - Tape and Reel (Alt: CAT1024ZI-28-GT3) RoHS : Compliant | 0 | |||
| CAT10-202J4LF | Bourns Inc | - Tape and Reel (Alt: CAT10-202J4LF) RoHS : Compliant |
| 0 | ||
| CAT10-203J4LF | Bourns Inc | - Tape and Reel (Alt: CAT10-203J4LF) RoHS : Compliant |
| 0 | ||
| ECO156CBAT102 | Vishay Intertechnologies | - Boxed Product (Development Kits) (Alt: ECO156CBAT102) RoHS : Not Compliant |
| 0 | ||
| HTWAT102-002 | Omega Engineering | HEATING TAPES WITH ADJUSTABLE THERMOSTAT - Bulk (Alt: HTWAT102-002) RoHS : Compliant |
| 0 | ||
| CAT10-222J4LF | Bourns Inc | - Tape and Reel (Alt: CAT10-222J4LF) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | CAT10-220J4LF | Bourns Inc | Resistor Networks & Arrays 22ohm 5% Concave 4resistors RoHS : Compliant |
| 74,552 | |
| CAT10-203J4LF | Bourns Inc | Resistor Networks & Arrays 20K RoHS : Compliant |
| 24,938 | ||
| CAT10-222J4LF | Bourns Inc | Resistor Networks & Arrays 2.2K 5% Concave 4resistors RoHS : Compliant |
| 18,040 | ||
| CAT10-202J4LF | Bourns Inc | Resistor Networks & Arrays 2K RoHS : Compliant |
| 18,027 | ||
| CAT10-221J4LF | Bourns Inc | Resistor Networks & Arrays 220ohm 5% Concave 4resistors RoHS : Compliant |
| 14,859 | ||
| CAT10-272J4LF | Bourns Inc | Resistor Networks & Arrays 2.7K 5% Concave 4resistors RoHS : Compliant |
| 13,970 | ||
| CAT10-270J4LF | Bourns Inc | Resistor Networks & Arrays 27 ohm RoHS : Compliant |
| 11,347 | ||
| CAT10-223J4LF | Bourns Inc | Resistor Networks & Arrays CHIP ARRAYS RoHS : Compliant |
| 11,315 | ||
| CAT10-240J4LF | Bourns Inc | Resistor Networks & Arrays 24ohm 5% Concave 4resistors RoHS : Compliant |
| 10,230 | ||
| ACGRAT102L-HF | Comchip Technology Corporation Ltd | Rectifiers LOW VF 1A 400V AEC-Q101 RoHS : Compliant |
| 276 | ||
| CAT10-241J4LF | Bourns Inc | Resistor Networks & Arrays 240ohm 5% Concave 4resistors RoHS : Compliant |
| 0 | ||
| CAT10-271J4LF | Bourns Inc | Resistor Networks & Arrays 270 ohm RoHS : Compliant |
| 0 | ||
| CAT10-200J4LF | Bourns Inc | Resistor Networks & Arrays 20 ohm RoHS : Compliant |
| 0 | ||
| ECO156CBAT102 | Vishay Intertechnologies | Precision Potentiometers ECO 156 C B A T 102 e4 |
| 0 | ||
| F78SAT102-M248 | Honeywell Sensing and Control | Precision Potentiometers WOONSOCKET POSITION RoHS : Compliant |
| 0 | ||
![]() Newark | CAT10-220J4LF | Bourns Inc | Resistor, Array, 22R, 5%, 0.125W; |Bourns, Inc. CAT10-220J4LF RoHS : Compliant |
| 43,205 | |
| CAT10-220J4LF | Bourns Inc | Resistor, Array, 22R, 5%, 0.125W; |Bourns, Inc. CAT10-220J4LF RoHS : Compliant |
| 43,205 | ||
| CAT10-220J4LF | Bourns Inc | Res, Isolated, 22R, 5%, 25V, 0804, Reel; |Bourns, Inc. CAT10-220J4LF RoHS : Compliant |
| 40,000 | ||
| CAT10-270J4LF | Bourns Inc | Res N/W, Isolated, 27R, 5%, 25V, 0804; |Bourns, Inc. CAT10-270J4LF RoHS : Compliant |
| 8,028 | ||
| CAT10-270J4LF | Bourns Inc | Res N/W, Isolated, 27R, 5%, 25V, 0804; |Bourns, Inc. CAT10-270J4LF RoHS : Compliant |
| 8,028 | ||
| FMAT1023 | Fairview Microwave Inc | Rf Fixed Attenuator; |Fairview Microwave FMAT1023 RoHS : Compliant |
| 1 | ||
| FMAT1022 | Fairview Microwave Inc | Rf Fixed Attenuator; |Fairview Microwave FMAT1022 RoHS : Compliant |
| 0 | ||
| FMAT1021 | Fairview Microwave Inc | Rf Fixed Attenuator; |Fairview Microwave FMAT1021 RoHS : Compliant |
| 0 | ||
| CAT10-202J4LF | Bourns Inc | Resistor Network, thick Film,2Kohms,25Wv,; |Bourns, Inc. CAT10-202J4LF RoHS : Compliant |
| 0 | ||
| CAT10-271J4LF | Bourns Inc | Resistor Network, thick Film,270Ohms,25Wv; |Bourns, Inc. CAT10-271J4LF RoHS : Compliant |
| 0 | ||
| CAT10-240J4LF | Bourns Inc | Resarray 4X0402 24R 5% 63Mw Concave; |Bourns, Inc. CAT10-240J4LF RoHS : Not Compliant |
| 0 | ||
| CAT10-240J4LF | Bourns Inc | Resistor Network, thick Film,24Ohms,25Wv,; |Bourns, Inc. CAT10-240J4LF RoHS : Compliant |
| 0 | ||
| CAT10-270J4LF | Bourns Inc | Nw Res Fixed, 27R, Isolated, 4Resistors; |Bourns, Inc. CAT10-270J4LF RoHS : Compliant |
| 0 | ||
| CAT10-203J4LF | Bourns Inc | Resistor Network, thick Film,20Kohms,25Wv; |Bourns, Inc. CAT10-203J4LF RoHS : Compliant |
| 0 | ||
| ECO156CBAT102 | Vishay Intertechnologies | Eco 156 C B A T 102 E4 /Box; |Vishay ECO156CBAT102 RoHS : Not Compliant |
| 0 | ||
![]() RS | NAT-102 | Moxa Inc | INDUSTRIAL NETWORK ADDRESS TRANSLATION (NAT) DEVICE,2-PORT,-10 TO 60C |
| 56 | |
| NAT-102-T | Moxa Inc | INDUSTRIAL NETWORK ADDRESS TRANSLATION (NAT) DEVICE,2-PORT,-40 TO 75C |
| 2 | ||
| 42AT10/24-2 | B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 24 TEETH, FOR BELT WIDTH 25MM, ALUMINUM |
| 2 | ||
| 32AT10/2590 | B&B Electronics Manufacturing Company | TIMING BELT, 32MM BELT WIDTH, 259 TEETH, 2590MM PITCH LENGTH, SINGLE SIDED |
| 2 | ||
| 25AT10/2590 | B&B Electronics Manufacturing Company | TIMING BELT, 25MM BELT WIDTH, 259 TEETH, 2590MM PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 66AT10/22-2 | B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 22 TEETH, FOR BELT WIDTH 50MM, ALUMINUM |
| 0 | ||
| 42AT10/27-2 | B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 27 TEETH, FOR BELT WIDTH 25MM, ALUMINUM |
| 0 | ||
| 42AT10/25-2 | B&B Electronics Manufacturing Company | TIMING PULLEY, 3.13'' PD, 3.06'' OD, 12 MM PLAIN BORE, ALUMINUM |
| 0 | ||
| 20AT10/2250 | B&B Electronics Manufacturing Company | TIMING BELT, 20MM BELT WIDTH, 225 TEETH, 2250MM PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 66AT10/24-2 | B&B Electronics Manufacturing Company | TIMING PULLEY, FLANGED, 12MM ID, 24 TEETH, FOR BELT WIDTH 50MM, ALUMINUM |
| 0 | ||
| CAT10-271J4LF | Bourns Inc | RESARRAY 4X0402 270R 5% 63MW CONCAVETAPE & REEL - 7 REEL RoHS : Compliant |
| 0 | ||
| CAT10-240J4LF | Bourns Inc | RESARRAY 4X0402 24R 5% 63MW CONCAVETAPE & REEL - 7 REEL RoHS : Compliant |
| 0 | ||
| CAT10-270J4LF | Bourns Inc | RESARRAY 4X0402 27R 5% 63MW CONCAVETAPE & REEL - 7 REEL RoHS : Compliant |
| 0 | ||
CAT1023WI-28-GT3![]() | onsemi | MCU SUPERVISOR 2K MEM VTH=2.925V SOIC8 RoHS : Compliant |
| 0 | ||
CAT1021WI-30-GT3![]() | onsemi | CAT1021WI-30-GT3,PROCESSOR SUPERVISOR 3V,3.3V,5V, WDT, RESET INPUT,8-PIN SOIC RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 4308M-102-102 | Bourns Inc | Res Thick Film NET 1K Ohm 2% 1.2W ±100ppm/°C ISOL Molded 8-Pin SIP Pin Thru-Hole |
| 1,688 | |
| 102 | HH Smith | Uninsulated Banana Plug - 6-32 Stud Thread - 3/8" Stud Length - 15A (AC). RoHS : Compliant |
| 315 | ||
| 102 | Marathon Special Products | Conn Barrier Strip 4 POS 9.5mm Screw Panel Mount 20A RoHS : Compliant |
| 145 | ||
| 102S | Switchcraft Conxall | Switch Push Button N.C. SPST Round Button 3A 300VA Quick Connect Panel Mount RoHS : Compliant |
| 12 | ||
| 102 | Woodhead Molex | A21 Incandescent Lamp RoHS : Compliant |
| 3 | ||
| 102 | Switchcraft Conxall | Switch Push Button N.C. SPST Round Button 0.25A 30VA Quick Connect Panel Mount RoHS : Compliant |
| 1 | ||
| IT-102 | Thomas & Betts | Bushing - Anti-Short - Size 2 - High Density Polyethylene - Red - AC Cable Size 12/4, 10/2, 10/3, 2/1 RoHS : Compliant |
| 0 | ||
| 102 | General Tools & Instruments LLC | UTILITY MICROMETER RoHS : Compliant |
| 0 | ||
| 102 | Platt Luggage | FOAM-FILLED CASES RoHS : Compliant |
| 0 | ||
| 102 | 3M | RoHS : Compliant |
| 0 | ||
| 102S | Woodhead Molex | 102 W/SWITCH IN HANDLE RoHS : Compliant |
| 0 | ||
| 102 | Philmore | STYLUS & RECORD CLEANING B RoHS : Compliant |
| 0 | ||
| 4304M-102-102 | Bourns Inc | Res Thick Film NET 1K Ohm 2% 0.6W ±100ppm/°C ISOL Molded 4-Pin SIP Pin Thru-Hole |
| 0 | ||
| 4306M-102-102 | Bourns Inc | Res Thick Film NET 1K Ohm 2% 0.9W ±100ppm/°C ISOL Molded 6-Pin SIP Pin Thru-Hole |
| 0 | ||
| 4610X-102-102 | Bourns Inc | Res Thick Film NET 1K Ohm 2% 1.25W ±100ppm/°C ISOL Molded 10-Pin SIP Pin Thru-Hole |
| 0 | ||
![]() Rochester Electronics | CAT1026LI-30-G![]() | onsemi | Power Management Circuit RoHS : Compliant |
| 3,550 | |
CAT1025WI-25-G![]() | onsemi | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.625V, CMOS, PDSO8 RoHS : Compliant |
| 900 | ||
CAT1027YI-28-GT3![]() | onsemi | CAT1027 - Dual Voltage Supervisory Circuit with serial I2C 2K Bit EEProm RoHS : Compliant |
| 2,999 | ||
CAT1021LI-42-G![]() | onsemi | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.375V, CMOS, PDIP8 RoHS : Compliant |
| 7,490 | ||
CAT1021LI42![]() | onsemi | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.2V, CMOS, PDIP8 RoHS : Compliant |
| 1,596 | ||
| CAT1021WI-25-G | onsemi | Voltage Supervisor/Reset IC, PDIP8 RoHS : Compliant |
| 5,003 | ||
| CAT1021WI-42-G | onsemi | Voltage Supervisor/Reset IC RoHS : Compliant |
| 2,170 | ||
CAT1027WI-28-GT3![]() | onsemi | CAT1027 - Dual Voltage Supervisory Circuit with serial I2C 2K Bit EEProm RoHS : Compliant |
| 1,694 | ||
CAT1021LI-30-G![]() | onsemi | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.075V, CMOS, PDIP8 RoHS : Compliant |
| 4,450 | ||
CAT1021LI45![]() | onsemi | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.5V, CMOS, PDIP8 RoHS : Compliant |
| 1,950 | ||
| CAT1021WI-25-T3 | onsemi | Supervisory Circuit 2.55V 8-SOIC T/R RoHS : Compliant |
| 5,799 | ||
CAT1021WI-30-GT3![]() | onsemi | Supervisory Circuit 3V 8-SOIC T/R RoHS : Compliant |
| 24,360 | ||
CAT1021WI-42-GT3![]() | onsemi | Supervisory Circuit 4.25V 8-SOIC T/R RoHS : Compliant |
| 217 | ||
CAT1021WI-30-GT3![]() | Catalyst Semiconductor | Supervisory Circuit 3V 8-SOIC T/R RoHS : Compliant |
| 500 | ||
CAT1021WI-42-GT3![]() | Catalyst Semiconductor | Supervisory Circuit 4.25V 8-SOIC T/R RoHS : Compliant |
| 32 | ||
![]() Sager | F78SAT102-M248 | Honeywell Sensing and Control / Clarostat | Precision Potentiometers WOONSOCKET POSITION |
| 0 | |
| A22RLTAT102M | OMRON Electronic Components | Pushbutton Switches Lighted PB,Blue,2NC | 0 | |||
| A22RW2MAT102 | OMRON Electronic Components | DIP Switches / SIP Switches Selector SW,2NC,Blue | 0 | |||
| AT-1020(BOX)(40) | Hirose Electric Co Ltd | Attenuators - Interconnects LP ATTENUATOR 20DB | 0 | |||
| 6AT102 | Honeywell Sensing and Control / MICRO SWITCH | Toggle Switches Sealed OI/AT TOG SW ASSEM |
| 0 | ||
| A22RW2AAT102 | OMRON Electronic Components | DIP Switches / SIP Switches Selector SW,2NC,Blue | 0 | |||
| A22RLTAT102A | OMRON Electronic Components | Pushbutton Switches Lighted PB,Blue,2NC | 0 | |||
![]() Ameya Holding Limited | CAT1025WI-30-GT3![]() | onsemi | Supervisory Circuits with I2C Serial 2k-bit CMOS EEPROM and Manual Reset RoHS : Compliant | 3,100 | ||
![]() PEI Genesis | J1551AT10-2-34 | SOURIAU-SUNBANK |
| 0 | ||
![]() Chip 1 Exchange | CAT10-220J4LF | INSTOCK | 150,000 | |||
| CAT10-220J4LF | Bourns Inc | INSTOCK RoHS : Compliant | 9,855 | |||
CAT1025WI-30-GT3![]() | onsemi | INSTOCK RoHS : Compliant | 7,099 | |||
![]() Avnet Abacus | CAT10-220J4LF | Bourns Inc | Fixed Network Resistor 22 ohm Isolated 4 Resistors 0804 2010 Metric Concave 5 - Tape and Reel (Alt: CAT10-220J4LF) RoHS : Compliant | 130,000 | ||
| CAT10-270J4LF | Bourns Inc | Resistor Array 27 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-270J4LF) RoHS : Compliant | 20,000 | |||
| CAT10-222J4LF | Bourns Inc | Resistor Array 22 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-222J4LF) RoHS : Compliant | 10,000 | |||
| CAT10-202J4LF | Bourns Inc | Resistor Array 2 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-202J4LF) RoHS : Compliant | 0 | |||
| CAT10-271J4LF | Bourns Inc | Resistor Array 270 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-271J4LF) RoHS : Compliant | 0 | |||
| CAT10-240J4LF | Bourns Inc | Resistor Array 24 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-240J4LF) RoHS : Compliant | 0 | |||
| CAT10-203J4LF | Bourns Inc | Resistor Array 20 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-203J4LF) RoHS : Compliant | 0 | |||
| CAT10-241J4LF | Bourns Inc | Resistor Array 240 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-241J4LF) RoHS : Compliant | 0 | |||
| CAT10-221J4LF | Bourns Inc | Resistor Array 220 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-221J4LF) RoHS : Compliant | 0 | |||
| CAT10-223J4LF | Bourns Inc | Resistor Array 22 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-223J4LF) RoHS : Compliant | 0 | |||
| CAT10-200J4LF | Bourns Inc | Resistor Array 20 Ohm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-200J4LF) RoHS : Compliant | 0 | |||
| CAT10-272J4LF | Bourns Inc | Resistor Array 27 kOhm 5 250 mW 4 Resistors Isolated 0804 2010 Metric Concave - Tape and Reel (Alt: CAT10-272J4LF) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RM73B2AT102J | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 27,001 | |
| G3AT102M | Tocos America Inc | IN STOCK SHIP TODAY |
| 230 | ||
CAT1023WI-28-GT3![]() | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 41 | ||
![]() Flip Electronics | CAT1021WI-30-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 33,000 | |
CAT1025WI-42-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 12,000 | ||
CAT1025WI-28-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 12,000 | ||
CAT1021WI-45-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
CAT1026WI-28-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
CAT1025WI-25-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
CAT1027WI-45-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,958 | ||
CAT1024YI-45-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
CAT1023WI-42-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,518 | ||
CAT1023WI-30-GT3![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 378 | ||
CAT1023WI-30![]() | onsemi | Stock RoHS : Compliant | 378 | |||
![]() Master Electronics | A22LTAT102MQ | OMRON Industrial Automation | RoHS : Compliant |
| 0 | |
| A22LHAT102MQ | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| CAT10-271J4LF | Bourns Inc | Res Thick Film Array 270 Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL 8-Pin 0804(4 X 0402) Concave SMD T/R RoHS : Compliant |
| 0 | ||
| A22LTAT102AQ | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| F78SAT102-M248 | Honeywell Sensing and Control | PRECISION POTENTIOMETER RoHS : Compliant |
| 0 | ||
| CAT10-240J4LF | Bourns Inc | Res Thick Film Array 24 Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R RoHS : Compliant |
| 0 | ||
| CAT10-270J4LF | Bourns Inc | Res Thick Film Array 27 Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL 8-Pin 0804(4 X 0402) Concave SMD T/R RoHS : Compliant |
| 0 | ||
| A22LDAT102MQ | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| CAT10-202J4LF | Bourns Inc | Res Thick Film Array 2K Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R RoHS : Compliant |
| 0 | ||
| CAT10-203J4LF | Bourns Inc | Res Thick Film Array 20K Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R RoHS : Compliant |
| 0 | ||
| A22LTAT102M | OMRON Industrial Automation | IL PB RND BLU XFMR DPST-NC MOM RoHS : Compliant |
| 0 | ||
| A22RLTAT102M | OMRON Industrial Automation | LIGHTED PB BLUE 2NC RoHS : Compliant |
| 0 | ||
| A22W2AAT102Q | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| A22RW2MAT102 | OMRON Industrial Automation | SELECTOR SW 2NC BLUE RoHS : Compliant |
| 0 | ||
| CAT10-241J4LF | Bourns Inc | Res Thick Film Array 240 Ohm 5% 0.25W(1/4W) ±250ppm/°C ISOL Molded 8-Pin 0804(4 X 0402) Concave SMD T/R RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PEWAT1025-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-187, Attenuation, Nominal: 20 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG, Minimum Frequency: 3.94 GHz, Maximum Frequency: 5.99 GHz, Maximum Power: 5 W. WR-187 Waveguide Fixed Attenuator, 20 dB, from 3.94 GHz to 5.99 GHz, UG Cover Flange, Rated to 5 Watt. Pasternack’s PEWAT1025-20 is a waveguide fixed attenuator built to operate in full WR-187 band. This WR-187 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 3.94 GHz and a maximum frequency of 5.99 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1025-20 WR-187 interface waveguide fixed attenuator from Pasternack is constructed with chromate conversion-plated aluminum material. This waveguide attenuator has an overall length of 9.45 inches, a width of 3.50 inches and weighs 0.92 lbs. Our PEWAT1025-20 WR-187 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG flange. The PEWAT1025-20 waveguide fixed attenuator is rated for maximum input power (CW) of 5 Watts along with 20 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-187 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 3.94 GHz waveguide fixed attenuator that meets your requirements. |
| 5 | |
| PEWAT1020-30 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 30 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 30 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-30 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-30 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-30 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-30 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 30 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements. |
| 3 | ||
| PEWAT1020-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 20 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 20 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-20 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-20 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-20 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-20 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 20 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements. |
| 3 | ||
| PEWAT1024-30 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-112, Attenuation, Nominal: 30 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-51/U, Minimum Frequency: 6.57 GHz, Maximum Frequency: 9.99 GHz, Maximum Power: 2 W. WR-112 Waveguide Fixed Attenuator, 30 dB, from 6.57 GHz to 9.99 GHz, UG-51/U Square Cover Flange, Rated to 2 Watt. Pasternack’s PEWAT1024-30 is a waveguide fixed attenuator built to operate in full WR-112 band. This WR-112 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 6.57 GHz and a maximum frequency of 9.99 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1024-30 WR-112 interface waveguide fixed attenuator from Pasternack is constructed with silver-plated brass copper material. This waveguide attenuator has an overall length of 4.72 inches, a width of 1.88 inches and weighs 0.73 lbs. Our PEWAT1024-30 WR-112 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-51/U flange. The PEWAT1024-30 waveguide fixed attenuator is rated for maximum input power (CW) of 2 Watts along with 30 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-112 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 6.57 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1022-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-42, Attenuation, Nominal: 20 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-595/U, Minimum Frequency: 17.6 GHz, Maximum Frequency: 26.7 GHz, Maximum Power: 1 W. WR-42 Waveguide Fixed Attenuator, 20 dB, from 17.6 GHz to 26.7 GHz, UG-595/U Square Cover Flange, Rated to 1 Watt. Pasternack’s PEWAT1022-20 is a waveguide fixed attenuator built to operate in full WR-42 band. This WR-42 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 17.6 GHz and a maximum frequency of 26.7 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1022-20 WR-42 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 3.15 inches, a width of 0.88 inches and weighs 0.13 lbs. Our PEWAT1022-20 WR-42 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-595/U flange. The PEWAT1022-20 waveguide fixed attenuator is rated for maximum input power (CW) of 1 Watts along with 20 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-42 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 17.6 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1021-6 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Attenuation, Nominal: 6 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-1530/U, Minimum Frequency: 21.7 GHz, Maximum Frequency: 33 GHz, Maximum Power: 0.5 W. WR-34 Waveguide Fixed Attenuator, 6 dB, from 21.7 GHz to 33 GHz, UG-1530/U Square Cover Flange, Rated to 0.5 Watt. Pasternack’s PEWAT1021-6 is a waveguide fixed attenuator built to operate in full WR-34 band. This WR-34 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 21.7 GHz and a maximum frequency of 33 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1021-6 WR-34 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 2.76 inches, a width of 0.87 inches and weighs 0.11 lbs. Our PEWAT1021-6 WR-34 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-1530/U flange. The PEWAT1021-6 waveguide fixed attenuator is rated for maximum input power (CW) of 0.5 Watts along with 6 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-34 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 21.7 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1021-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Attenuation, Nominal: 20 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-1530/U, Minimum Frequency: 21.7 GHz, Maximum Frequency: 33 GHz, Maximum Power: 0.5 W. WR-34 Waveguide Fixed Attenuator, 20 dB, from 21.7 GHz to 33 GHz, UG-1530/U Square Cover Flange, Rated to 0.5 Watt. Pasternack’s PEWAT1021-20 is a waveguide fixed attenuator built to operate in full WR-34 band. This WR-34 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 21.7 GHz and a maximum frequency of 33 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1021-20 WR-34 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 2.76 inches, a width of 0.87 inches and weighs 0.11 lbs. Our PEWAT1021-20 WR-34 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-1530/U flange. The PEWAT1021-20 waveguide fixed attenuator is rated for maximum input power (CW) of 0.5 Watts along with 20 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-34 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 21.7 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1023-30 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Attenuation, Nominal: 30 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-39/U, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz, Maximum Power: 2 W. WR-90 Waveguide Fixed Attenuator, 30 dB, from 8.2 GHz to 12.4 GHz, UG-39/U Square Cover Flange, Rated to 2 Watt. Pasternack’s PEWAT1023-30 is a waveguide fixed attenuator built to operate in full WR-90 band. This WR-90 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1023-30 WR-90 interface waveguide fixed attenuator from Pasternack is constructed with passivated-plated brass copper material. This waveguide attenuator has an overall length of 4.33 inches, a width of 1.63 inches and weighs 0.49 lbs. Our PEWAT1023-30 WR-90 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-39/U flange. The PEWAT1023-30 waveguide fixed attenuator is rated for maximum input power (CW) of 2 Watts along with 30 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-90 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 8.2 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1022-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-42, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-595/U, Minimum Frequency: 17.6 GHz, Maximum Frequency: 26.7 GHz, Maximum Power: 1 W. WR-42 Waveguide Fixed Attenuator, 10 dB, from 17.6 GHz to 26.7 GHz, UG-595/U Square Cover Flange, Rated to 1 Watt. Pasternack’s PEWAT1022-10 is a waveguide fixed attenuator built to operate in full WR-42 band. This WR-42 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 17.6 GHz and a maximum frequency of 26.7 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1022-10 WR-42 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 3.15 inches, a width of 0.88 inches and weighs 0.13 lbs. Our PEWAT1022-10 WR-42 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-595/U flange. The PEWAT1022-10 waveguide fixed attenuator is rated for maximum input power (CW) of 1 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-42 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 17.6 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1021-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-1530/U, Minimum Frequency: 21.7 GHz, Maximum Frequency: 33 GHz, Maximum Power: 0.5 W. WR-34 Waveguide Fixed Attenuator, 10 dB, from 21.7 GHz to 33 GHz, UG-1530/U Square Cover Flange, Rated to 0.5 Watt. Pasternack’s PEWAT1021-10 is a waveguide fixed attenuator built to operate in full WR-34 band. This WR-34 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 21.7 GHz and a maximum frequency of 33 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1021-10 WR-34 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 2.76 inches, a width of 0.87 inches and weighs 0.13 lbs. Our PEWAT1021-10 WR-34 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-1530/U flange. The PEWAT1021-10 waveguide fixed attenuator is rated for maximum input power (CW) of 0.5 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-34 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 21.7 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1021-3 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Attenuation, Nominal: 3 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-1530/U, Minimum Frequency: 21.7 GHz, Maximum Frequency: 33 GHz, Maximum Power: 0.5 W. WR-34 Waveguide Fixed Attenuator, 3 dB, from 21.7 GHz to 33 GHz, UG-1530/U Square Cover Flange, Rated to 0.5 Watt. Pasternack’s PEWAT1021-3 is a waveguide fixed attenuator built to operate in full WR-34 band. This WR-34 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 21.7 GHz and a maximum frequency of 33 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1021-3 WR-34 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 2.76 inches, a width of 0.87 inches and weighs 0.11 lbs. Our PEWAT1021-3 WR-34 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-1530/U flange. The PEWAT1021-3 waveguide fixed attenuator is rated for maximum input power (CW) of 0.5 Watts along with 3 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-34 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 21.7 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1023-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-39/U, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz, Maximum Power: 2 W. WR-90 Waveguide Fixed Attenuator, 10 dB, from 8.2 GHz to 12.4 GHz, UG-39/U Square Cover Flange, Rated to 2 Watt. Pasternack’s PEWAT1023-10 is a waveguide fixed attenuator built to operate in full WR-90 band. This WR-90 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1023-10 WR-90 interface waveguide fixed attenuator from Pasternack is constructed with passivated-plated brass copper material. This waveguide attenuator has an overall length of 4.92 inches, a width of 1.63 inches and weighs 0.5 lbs. Our PEWAT1023-10 WR-90 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-39/U flange. The PEWAT1023-10 waveguide fixed attenuator is rated for maximum input power (CW) of 2 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-90 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 8.2 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PEWAT1020-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 10 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-10 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-10 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-10 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-10 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements. |
| 1 | ||
| PEWAT1023-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Attenuation, Nominal: 20 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-39/U, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz, Maximum Power: 2 W. WR-90 Waveguide Fixed Attenuator, 20 dB, from 8.2 GHz to 12.4 GHz, UG-39/U Square Cover Flange, Rated to 2 Watt. Pasternack’s PEWAT1023-20 is a waveguide fixed attenuator built to operate in full WR-90 band. This WR-90 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1023-20 WR-90 interface waveguide fixed attenuator from Pasternack is constructed with passivated-plated brass copper material. This waveguide attenuator has an overall length of 4.33 inches, a width of 1.63 inches and weighs 0.49 lbs. Our PEWAT1023-20 WR-90 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-39/U flange. The PEWAT1023-20 waveguide fixed attenuator is rated for maximum input power (CW) of 2 Watts along with 20 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-90 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 8.2 GHz waveguide fixed attenuator that meets your requirements. |
| 1 | ||
![]() Vyrian | CAT1024ZD4I-42T3![]() | onsemi | Power Supply Support Circuit, Fixed, 1 Channel, +4.375V, CMOS, PDSO8 RoHS : Compliant | 10,689 | ||
CAT1025WI-28-G![]() | onsemi | Power Supply Support Circuit, Fixed, 1 Channel, +2.925V, CMOS, PDSO8 RoHS : Compliant | 8,056 | |||
CAT1026WI30![]() | onsemi | Power Supply Support Circuit, Adjustable, 2 Channel, CMOS, PDSO8 RoHS : Compliant | 7,462 | |||
CAT1027WI28![]() | onsemi | Power Supply Management Circuit, Adjustable, 2 Channel, CMOS, PDSO8 RoHS : Compliant | 6,769 | |||
CAT1022WI-25-GT3![]() | onsemi | Power Supply Support Circuit, Fixed, 1 Channel, +2.625V, CMOS, PDSO8 RoHS : Compliant | 6,688 | |||
| CAT1022WI-25-G | onsemi | Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO8 RoHS : Compliant | 6,110 | |||
CAT1026WI25![]() | onsemi | Power Supply Support Circuit, Adjustable, 2 Channel, CMOS, PDSO8 RoHS : Compliant | 6,094 | |||
| CAT1027WI-28-G | onsemi | Power Supply Management Circuit, Adjustable, 2 Channel, CMOS, PDSO8 RoHS : Compliant | 5,455 | |||
CAT1021LI25![]() | onsemi | Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDIP8 RoHS : Compliant | 4,378 | |||
CAT1023WI42![]() | onsemi | Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDSO8 RoHS : Compliant | 3,029 | |||
CAT1027WI45![]() | onsemi | Power Supply Management Circuit, Adjustable, 2 Channel, CMOS, PDSO8 RoHS : Compliant | 2,217 | |||
| A22L-GA-T1-02M | OMRON Corporation | Pushbutton Switch, DPST, Momentary, Screw Terminal, Panel Mount RoHS : Compliant | 566 | |||
CAT1022ZI-42-GT3![]() | onsemi | Power Supply Support Circuit, Fixed, 1 Channel, +4.375V, CMOS, PDSO8 RoHS : Compliant | 487 | |||
CAT1026ZI-42-GT3![]() | onsemi | Power Supply Support Circuit, Adjustable, 2 Channel, +4.375V, CMOS, PDSO8 RoHS : Compliant | 232 | |||
CAT1021ZI-42-GT3![]() | onsemi | Power Supply Support Circuit, Fixed, 1 Channel, +4.375V, CMOS, PDSO8 RoHS : Compliant | 193 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |