Electronic Components Datasheet Search
  English  ▼

X  



AP-41-R2 Distributor
DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

TME		AP4313KTR-G1

 Diodes Incorporated IC: PMIC; CV/CC controller; SOT26; SMPS; 0.6mA; 2.5÷18VDC
RoHS : Compliant
6,000 : $0.063
3,000 : $0.068
1,000 : $0.078
500 : $0.087
100 : $0.123
10 : $0.241
5 : $0.296
1 : $0.42
2,840
TAP476K016CCS

 Kyocera AVX Components Capacitor: tantalum; 47uF; 16VDC; THT; ±10%; -55÷125°C; TAP; 5mm
RoHS : Compliant
500 : $1.61
200 : $1.68
100 : $1.76
50 : $1.89
10 : $2.29
1 : $3.26
235
TAP476K006SCS

 Kyocera AVX Components Capacitor: tantalum; 47uF; 6.3VDC; THT; ±10%; -55÷125°C; TAP; 2.5mm
RoHS : Compliant
100 : $0.82
50 : $0.83
25 : $0.92
10 : $1.08
5 : $1.35
134
TAP476K035CCS

 Kyocera AVX Components Capacitor: tantalum; 47uF; 35VDC; THT; ±10%; -55÷125°C; TAP; 5mm
RoHS : Compliant
10 : $4.91
5 : $5.09
1 : $6.35
75
YD369-G99-AP400000

 TE Connectivity Contact; 369; gold-plated; sealed; THT; for cable; Inom: 5A; Imax: 5A
RoHS : Compliant
50 : $66.41
25 : $68.37
2 : $79.58
70
ZB5AP4

 Schneider Electric Switch: push-button; 22mm; Stabl.pos: 1; red; none; IP66; prominent
RoHS : Compliant
10 : $8.94
5 : $9.53
1 : $10.13
8
7210 ACDGA/P4A SKF

 SKF Bearing: rolling; single row deep groove ball; angular contact
12 : $198.15
6 : $212.3
1 : $226.45
0
0ADAP4000-RE

 Bel Fuse Fuse: fuse; 6.3x32mm; ceramic; THT; 4A; 600VAC; 600VDC; quick blow
RoHS : Compliant
1,000 : $2.36
0
TAP475M010SRW

 Kyocera AVX Components Capacitor: tantalum; 4.7uF; 10VDC; THT; ±20%; -55÷125°C; TAP; 2.5mm
RoHS : Compliant
1,500 : $0.363
0
ZSC00AP4712AARL

 Vishay Intertechnologies Capacitor: electrolytic; low ESR; SMD; 470uF; 100VDC; Ø18x21.5mm
RoHS : Compliant
5,000 : $0.94
0
AP4E300TZBE

 C&K Switches Switch: push-button; Pos: 2; SPST-NO; 0.4A/32VAC; 0.2A/24VDC; IP67
RoHS : Compliant
1,000 : $11.84
250 : $12.55
100 : $13.2
80 : $13.4
0
AP4E200SZBE

 C&K Switches Switch: push-button; Pos: 2; SPST-NO; 0.4A/32VAC; 0.2A/24VDC; IP67
RoHS : Compliant
160 : $10.87
100 : $11.09
80 : $11.24
0
7008 CDGA/P4A SKF

 SKF Bearing: rolling; single row deep groove ball; angular contact
5 : $206.88
3 : $228.29
1 : $256.82
0
TAP474K035SCS

 Kyocera AVX Components Capacitor: tantalum; 0.47uF; 35VDC; THT; ±10%; -55÷125°C; TAP; 2.5mm
RoHS : Compliant
1,000 : $0.382
0
TAP476K010SCS

 Kyocera AVX Components Capacitor: tantalum; 47uF; 10VDC; THT; ±10%; -55÷125°C; TAP; 2.5mm
RoHS : Compliant
1,000 : $0.83
0

ComSIT USA		TAP476K016SRW

 Kyocera AVX Components AVAILABLE EU
RoHS : Compliant
2,391
TAP476M035HSB

 AVX/KYOCERA AVX COMPONENTS CORPORATION AVAILABLE EU
2

NexGen Digital		D369-G99-AP4

 TE Connectivity
RoHS : Compliant
142
OD172SAP-48HB

 Orion Fans
12
TAP475K010SRW

 Kyocera AVX Components
RoHS : Compliant
10

Avnet Abacus		TAP475K035SRW

 Kyocera AVX Components Tantalum Capacitor 47 uF 35 V 10 Radial Leaded 25 mm 3 ohm Radial Leaded 9 mm (Alt: TAP475K035SRW)
RoHS : Compliant
3,000
MAP40-3101G

 Bel Fuse (Alt: MAP40-3101G)
RoHS : Compliant
0
TAP474K035CCS

 Kyocera AVX Components Tantalum Capacitor 047 uF 35 V 10 Radial Leaded 5 mm 13 ohm 45 mm 85 mm (Alt: TAP474K035CCS)
RoHS : Compliant
0
TAP474M035DTS

 Kyocera AVX Components Tantalum Capacitor 047 uF 35 V 20 Radial Leaded 13 Ohm 45 mm 85 mm (Alt: TAP474M035DTS)
RoHS : Compliant
0
TAP474M035SRS

 Kyocera AVX Components Tantalum Capacitor 047 uF 35 V 20 Radial Leaded 13 Ohm 45 mm 85 mm (Alt: TAP474M035SRS)
RoHS : Compliant
0
TAP475K035CRS

 Kyocera AVX Components Tantalum Capacitor 47 uF 35 V 10 Radial Leaded 3 Ohm 55 mm 105 mm (Alt: TAP475K035CRS)
RoHS : Compliant
0
TAP476K006CCS

 Kyocera AVX Components Tantalum Capacitor 47 uF 63 V 10 Radial Leaded 5 mm 2 ohm Radial Leaded 115 mm (Alt: TAP476K006CCS)
RoHS : Compliant
0
TAP476M016CRS

 Kyocera AVX Components Tantalum Capacitor 47 uF 16 V 20 Radial Leaded 13 Ohm 8 mm 13 mm (Alt: TAP476M016CRS)
RoHS : Compliant
0
TAP475M050CRS

 Kyocera AVX Components Tantalum Capacitor 47 uF 50 V 20 Radial Leaded 25 Ohm 65 mm 115 mm (Alt: TAP475M050CRS)
RoHS : Compliant
0
TAP476K010SCS

 Kyocera AVX Components Tantalum Capacitor 47 uF 10 V 10 Radial Leaded 25 mm 17 ohm Radial Leaded 10 mm (Alt: TAP476K010SCS)
RoHS : Compliant
0
TAP476K025CCS

 Kyocera AVX Components (Alt: TAP476K025CCS)
RoHS : Compliant
0
TAP476M035CRS

 Kyocera AVX Components Tantalum Capacitor 47 uF 35 V 20 Radial Leaded 08 Ohm 9 mm 16 mm (Alt: TAP476M035CRS)
RoHS : Compliant
0
TAP475J016CCS

 Kyocera AVX Components Tantalum Capacitor 47 uF 16 V 5 Radial Leaded 5 Ohm 45 mm 9 mm (Alt: TAP475J016CCS)
RoHS : Compliant
0
TAP475K016CRW

 Kyocera AVX Components (Alt: TAP475K016CRW)
RoHS : Compliant
0
TAP475M006SCS

 Kyocera AVX Components Tantalum Capacitor 47 uF 63 V 20 Radial Leaded 10 Ohm 45 mm 85 mm (Alt: TAP475M006SCS)
RoHS : Compliant
0

Braemac Americas-Symmetry		BS19A-P48/5.0L

 Nipron Co
1 : $930.57
0
DIGI-IM-LCAP-4YR-EXT

 Digi International Inc IM LifeCycle Assurance On-Prem - 4yr Extension
1 : $192.0
0
IX20-WAP4

 Digi International Inc Digi IX20 - Priority, LTE, CAT-4, Dual Ethernet, RS-232, Wi-Fi, with Accessories FirstNet Ready
1 : $709.0
0
SX-AP-4800AN2

 Silex Technology America Inc SX-AP-4800AN 802.11a/b/g/n Access Point with Enterprise Security, and PoE, US Power Supply
1 : $500.25
0

DB Roberts		BAP4-0025-ER0201

 Device Technologies Inc
1 : $123.75
100 : $123.75
118 : $123.75
118
AP4-0100-ER02

 Device Technologies Inc
1 : $355.23
10 : $355.23
10

Flip Electronics		MC908AP48CFBER

 NXP Semiconductors Stock
3,000

Maritex		AP4320BK6TR-G1

 Diodes Incorporated Instrumentation Amplifiers; AP4320BK6TR-G1; DIODES; SOT-23-6
RoHS : Compliant
3,000 : $0.097
1 : $0.1316
450,905
AP4313KTR-G1

 Diodes Incorporated Special Purpose Amplifiers; AP4313KTR-G1; DIODES; 6; SOT-23-6
RoHS : Compliant
6,000 : $0.065
3,000 : $0.07
500 : $0.083
150 : $0.096
50 : $0.112
5 : $0.148
1 : $0.464
5,999
AP4306AKTR-G1

 Diodes Incorporated Special Purpose Amplifiers; AP4306AKTR-G1; DIODES; 6; SOT-23-6
RoHS : Compliant
9,000 : $0.16
3,000 : $0.212
1 : $0.6644
3,000
AP4310AMTR-G1

 Diodes Incorporated Operational Amplifiers; AP4310AMTR-G1; DIODES; 500 �V; 8; 36 V; 2
RoHS : Compliant
4,000 : $0.106
2,500 : $0.116
500 : $0.152
150 : $0.188
50 : $0.221
5 : $0.303
1 : $0.9438
1,507

Master Electronics		PHAP4383V

 APEM Inc Double pole double throw latching action key switch with audible click and molded-in terminals.
RoHS : Compliant
2,000 : $0.577
1,500 : $0.761
1,000 : $0.805
500 : $0.887
250 : $0.913
100 : $1.158
50 : $1.161
2,000
MAP40-3101G

 Bel Power Solutions AC/DC Power Supply Triple-OUT 5V/24V/-12V 3A/1A/0.3A 40W
RoHS : Compliant
60 : $266.93
45 : $272.38
30 : $400.14
15 : $783.43
10 : $785.4
5 : $787.36
1 : $789.34
14
MAP42-1012

 Bel Power Solutions AC/DC Power Supply Single-OUT 12V/15V 3.4A/2.7A 40W
RoHS : Compliant
30 : $317.61
9 : $335.74
4 : $350.85
2 : $367.87
1 : $382.05
0
MAP4KE13AE3

 Microchip Technology Inc TVS 13V 5% 400W uni
RoHS : Compliant
200 : $6.55
150 : $6.69
100 : $8.45
50 : $13.73
0
MAP4KE150AE3

 Microchip Technology Inc TVS 150V 5% 400W uni
RoHS : Compliant
200 : $6.55
150 : $6.69
100 : $8.45
50 : $13.73
0
MAP4KE16CAE3

 Microchip Technology Inc TVS 16V 5% 400W bi
RoHS : Compliant
200 : $7.13
150 : $7.27
100 : $9.18
50 : $14.92
0
MAP4KE350A

 Microchip Technology Inc TVS 350V 5% 400W uni
RoHS : Compliant
100 : $10.1
75 : $10.3
50 : $11.04
25 : $14.72
0
MAP4KE36CA

 Microchip Technology Inc TVS 36V 5% 400W bi
RoHS : Compliant
200 : $7.13
150 : $7.27
100 : $9.18
50 : $14.92
0
MAP4KE9.1A

 Microchip Technology Inc TVS 9.1V 5% 400W uni
RoHS : Compliant
200 : $6.55
150 : $6.69
100 : $8.45
50 : $13.73
0
AP4-22313-1

 Sensata Circuit Breakers Circuit Breakers
RoHS : Not Compliant
3 : $493.56
2 : $562.68
1 : $722.52
0
AP4D502TZBE

 C&K Switches SWITCH AP4D502TZBE
RoHS : Compliant
80 : $12.49
60 : $12.75
40 : $13.66
20 : $18.21
0
AP4E206SWBE

 C&K Switches Pushbuttons
RoHS : Compliant
80 : $13.28
60 : $13.55
40 : $14.52
20 : $19.36
0
AP4N006SZBE

 C&K Switches Industrial Pushbutton Switches
RoHS : Compliant
80 : $9.62
60 : $9.82
40 : $10.52
20 : $14.03
0
MAP4KE170A

 Microchip Technology Inc TVS 170V 5% 400W uni
RoHS : Compliant
200 : $6.55
150 : $6.69
100 : $8.45
50 : $13.73
0
MAP4KE18CA

 Microchip Technology Inc TVS 18V 5% 400W bi
RoHS : Compliant
200 : $7.13
150 : $7.27
100 : $9.18
50 : $14.92
0

Pasternack Enterprises US		PE7AP402-30

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 30 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-30 30 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,650.0
5 : $1,584.0
10 : $1,518.0
76
PE7AP402-20

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 20 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-20 20 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,550.0
5 : $1,488.0
10 : $1,426.0
27
PE7AP4009-20

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 20 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-20 20 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,170.0
5 : $1,146.6
10 : $1,123.2
25 : $1,099.8
22
PE7AP402-10

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 10 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-10 10 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,420.0
5 : $1,363.2
10 : $1,306.4
16
PE7AP412-30

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.5:1, Attenuation: 30 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7AP412-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP412-30 30 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP412-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $439.99
10 : $422.39
25 : $404.79
15
PE7AP412-05

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.4:1, Attenuation: 5 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 5 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7AP412-05 is a fixed 5 dB attenuator from Pasternack. This 5dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP412-05 5 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP412-05 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 5dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $441.99
10 : $424.31
25 : $406.63
9
PE7AP402-3

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 3 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 3 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-3 3 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,380.0
5 : $1,324.8
10 : $1,269.6
9
PE7AP4009-06

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 6 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-06 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-06 6 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-06 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,190.0
5 : $1,166.2
10 : $1,142.4
25 : $1,118.6
7
PE7AP412-02

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.4:1, Attenuation: 2 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 2 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7AP412-02 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP412-02 2 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP412-02 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $453.99
10 : $435.83
25 : $417.67
7
PE7AP402-6

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 6 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-6 6 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,480.0
5 : $1,420.8
10 : $1,361.6
4
PE7AP4009-40

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 40 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-40 40 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,510.0
5 : $1,479.8
10 : $1,449.6
25 : $1,419.4
3
PE7AP412-08

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.4:1, Attenuation: 8 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 8 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7AP412-08 is a fixed 8 dB attenuator from Pasternack. This 8dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP412-08 8 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP412-08 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 8dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $425.99
10 : $408.95
25 : $391.91
2
PE7AP418-40

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 500 Watt, VSWR Maximum: 1.35:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Male to N Female Directional Black Anodized Aluminum Heatsink Body Rated to 500 Watts Up to 3 GHz. PE7AP418-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7AP418-40 40 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 500 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP418-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $3,270.0
5 : $3,204.6
10 : $3,139.2
25 : $3,073.8
2
PE7AP418-30

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 500 Watt, VSWR Maximum: 1.35:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male to N Female Directional Black Anodized Aluminum Heatsink Body Rated to 500 Watts Up to 3 GHz. PE7AP418-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7AP418-30 30 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 500 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP418-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $3,250.0
5 : $3,120.0
10 : $2,990.0
25 : $2,860.0
1
PE7AP412-20

 Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.5:1, Attenuation: 20 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7AP412-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP412-20 20 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP412-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $447.99
10 : $430.07
25 : $412.15
0

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com