A1007AY-331M Price, Distributor, Stock

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 2.4 GHz Maximum Frequency 2.5 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 2400-2500 MHz, 2.3 dBi, Stamped Metal AP/Router Embedded Antenna., Linear polarized antenna PESMA1007 from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 2500 MHz and a minimum frequency of 2400 MHz. This stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 1.11 inches and a width of 0.32 inches. Pasternack’s PESMA1007 is a single band antenna operating from 2400 to 2500 MHz with a 2.3 dBi gain. Our high-quality omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1007 stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $0.81
25 : $0.77
50 : $0.73
100 : $0.7

6,875

PE51YA1007

Pasternack Enterprises

Key Specifications, Antenna Type: Yagi, Polarization: Vertical or Horizontal, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 900 MHz 3 dBi Yagi Antenna. Yagi antenna PE51YA1007 from Pasternack is part of our extensive in-stock RF directional antenna selection. This vertical or horizontal polarized Yagi antenna has a frequency range of and a nominal dBi gain. Our Yagi antenna uses type N female connector and is rated for 100Watts input. PE51YA1007 Yagi antenna is one of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Yagi aerial can ship worldwide the same-day of the purchase as with our other available RF parts.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

420

PE3CA1007

Pasternack Enterprises

350

PE3CA1007-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: HMCX32 1.2, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to HMCX32 1.2 Plug Cable 12 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to HMCX32 1.2 plug cable 12 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to HMCX32 1.2 plug cable 12 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to HMCX32 1.2 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and HMCX32 1.2 cable connection on the other. Our SMA to HMCX32 1.2 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to HMCX32 1.2 cable is a female to plug coax assembly, PE3CA1007-12, can also be known as a SMA jack to HMCX32 1.2 male cable assembly and will be shipped same-day as it is purchased. SMA jack to HMCX32 1.2 male cable assembly PE3CA1007-12 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to HMCX32 1.2 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to HMCX32 1.2 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1007-12 can also be used in the other direction and will be HMCX32 1.2 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to HMCX32 1.2 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to HMCX32 1.2 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to HMCX32 1.2 plug cable 12 inch length using 0.81mm coax, RoHS.

1 : $23.19
25 : $22.03
50 : $20.87
100 : $19.94

269

PE3FCA100-7M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM3, 2.0mm Plenum, Aqua-7M. Pasternack’s PE3FCA100-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM3 patch cable assembly is optimized for high-speed, high-bandwidth data transfer, supporting faster and longer-distance connectivity than OM1 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA100-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.

1 : $23.9745
5 : $23.02
10 : $22.06
25 : $21.1

209

PESMA1007-50PK

Pasternack Enterprises

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 2.4 GHz Maximum Frequency 2.5 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 2400-2500 MHz, 2.3 dBi, Stamped Metal AP/Router Embedded Antenna-50 Pack., Linear polarized antenna PESMA1007-50PK from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 2500 MHz and a minimum frequency of 2400 MHz. This 50-pack stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 1.11 inches and a width of 0.32 inches. Pasternack’s PESMA1007-50PK is a single band antenna operating from 2400 to 2500 MHz with a 2.3 dBi gain. Our high-quality 50-pack omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1007-50PK 50-pack stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $45.39
25 : $43.12
50 : $40.85
100 : $39.04

PE15A1007

Pasternack Enterprises

Key Specifications, Gain: 32 dB, Power Output: 16 dBm P1dB, Frequency, Min: 0.009 MHz, Frequency, Max: 3 GHz, Noise Figure, Max: 3 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 130 mA, Connector Series: SMA. 29 dBm IP3, 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA. PE15A1007 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 0.009 MHz and maximum frequency of 3 GHz. The significantly low noise figure of this radio frequency amplifier is 3 dB with a typical gain of 32 dB. LNA amplifier PE15A1007 is rated at 15 Volts DC maximum and 130 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $710.0
10 : $681.6
25 : $653.2

PE3CA1007-3

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: HMCX32 1.2, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Female Bulkhead to HMCX32 1.2 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to HMCX32 1.2 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and HMCX32 1.2 cable connection on the other. Our SMA to HMCX32 1.2 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to HMCX32 1.2 cable is a female to plug coax assembly, PE3CA1007-3, can also be known as a SMA jack to HMCX32 1.2 male cable assembly and will be shipped same-day as it is purchased. SMA jack to HMCX32 1.2 male cable assembly PE3CA1007-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to HMCX32 1.2 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to HMCX32 1.2 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1007-3 can also be used in the other direction and will be HMCX32 1.2 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to HMCX32 1.2 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to HMCX32 1.2 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS.

1 : $19.19
25 : $18.23
50 : $17.27
100 : $16.5

PE3CA1007-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: HMCX32 1.2, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female Bulkhead to HMCX32 1.2 Plug Cable 6 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to HMCX32 1.2 plug cable 6 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to HMCX32 1.2 plug cable 6 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to HMCX32 1.2 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and HMCX32 1.2 cable connection on the other. Our SMA to HMCX32 1.2 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to HMCX32 1.2 cable is a female to plug coax assembly, PE3CA1007-6, can also be known as a SMA jack to HMCX32 1.2 male cable assembly and will be shipped same-day as it is purchased. SMA jack to HMCX32 1.2 male cable assembly PE3CA1007-6 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to HMCX32 1.2 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to HMCX32 1.2 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1007-6 can also be used in the other direction and will be HMCX32 1.2 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to HMCX32 1.2 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to HMCX32 1.2 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to HMCX32 1.2 plug cable 6 inch length using 0.81mm coax, RoHS.

1 : $26.59
25 : $25.26
50 : $23.93
100 : $22.87

PEWCA1007

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-90, Coax Connector Impedance: 50 Ohm, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz. WR-90 CPR-90G Grooved Flange to SMA Female Waveguide to Coax Adapter Operating from 8.2 GHz to 12.4 GHz. PEWCA1007 WR-90 waveguide to coax adapter is also known as a WR-90 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-90 to SMA connector and has a female gender. Our WR90 to SMA female waveguide adapter transition has a right angle design and has a CPR-90G flange. Pasternack right angle WR 90 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. WR-90 waveguide to SMA transition adapter to coax PEWCA1007 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-90 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $805.0
5 : $772.8
10 : $740.6

TE Connectivity

V23061A1007A302

TE Connectivity

V23061A1007A302=MINISTARKSTROM Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 8 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | Electromechanical Relay | Part Number: V23061A1007A302 | Internal Number: 3-1393222-9 | TE Connectivity
RoHS : Compliant

500 : $11.31
250 : $11.69
100 : $12.09
50 : $12.48
25 : $12.86
10 : $13.26
1 : $13.67

154

Vyrian

V23148A1007A101

TE Connectivity

Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.019A (Coil), 24VDC (Coil), 450mW (Coil), 7A (Contact), DC Input, AC/DC Output, Panel Mount
RoHS : Compliant

6,471

62GB-16A10-07PC

Amphenol Corporation

MIL Series Connector, 7 Contact(s), Aluminum Alloy, Male, Solder Terminal, Plug

654

A1007AY-331M Distributor

Link URL