A100-15-RSCGF Price, Distributor, Stock

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 2.4 GHz Maximum Frequency 2.5 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 2400-2500 MHz, 3.3 dBi, Stamped Metal AP/Router Embedded Antenna With IPEX Connector., Linear polarized antenna PESMA1003 from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 2500 MHz and a minimum frequency of 2400 MHz. This stamped metal antenna with an IPEX connector has a maximum input VSWR of 2:1. This stamped metal antenna with an IPEX connector has an overall length of 1.13 inches and a width of 0.15 inches. Pasternack’s PESMA1003 is a single band antenna operating from 2400 to 2500 MHz with a 3.3 dBi gain. Our high-quality omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1003 stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $4.25
25 : $4.04
50 : $3.83
100 : $3.66

4,400

PE3CA1007-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: HMCX32 1.2, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to HMCX32 1.2 Plug Cable 12 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to HMCX32 1.2 plug cable 12 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to HMCX32 1.2 plug cable 12 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to HMCX32 1.2 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and HMCX32 1.2 cable connection on the other. Our SMA to HMCX32 1.2 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to HMCX32 1.2 cable is a female to plug coax assembly, PE3CA1007-12, can also be known as a SMA jack to HMCX32 1.2 male cable assembly and will be shipped same-day as it is purchased. SMA jack to HMCX32 1.2 male cable assembly PE3CA1007-12 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to HMCX32 1.2 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to HMCX32 1.2 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1007-12 can also be used in the other direction and will be HMCX32 1.2 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to HMCX32 1.2 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to HMCX32 1.2 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to HMCX32 1.2 plug cable 12 inch length using 0.81mm coax, RoHS.

1 : $24.89
25 : $23.65
50 : $22.4
100 : $21.41

269

PE3FCA100-5M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM3, 2.0mm Plenum, Aqua-5M. Pasternack’s PE3FCA100-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM3 patch cable assembly is optimized for high-speed, high-bandwidth data transfer, supporting faster and longer-distance connectivity than OM1 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA100-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.

1 : $25.19
5 : $24.18
10 : $23.17
25 : $22.17

266

PESMA1009-50PK

Pasternack Enterprises

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 1.88 GHz Maximum Frequency 1.9 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 1880-1900 MHz, 3 dBi, Stamped Metal DECT Embedded Antenna-50 Pack., Linear polarized antenna PESMA1009-50PK from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 1900 MHz and a minimum frequency of 1880 MHz. This 50-pack stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 1.14 inches and a width of 0.6 inches. Pasternack’s PESMA1009-50PK is a single band antenna operating from 1880 to 1900 MHz with a 3 dBi gain. Our high-quality 50-pack omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1009-50PK 50-pack stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $51.79
25 : $49.2
50 : $46.61
100 : $44.54

PESMA1001-50PK

Pasternack Enterprises

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 2.4 GHz Maximum Frequency 5.825 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 2400-2500 / 4900-5825 MHz, 3.5/5 dBi, Stamped Metal AP/Router Embedded Antenna-50 Pack., Linear polarized antenna PESMA1001-50PK from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 5825 MHz and a minimum frequency of 2400 MHz. This 50-pack stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 2.16 inches and a width of 0.7 inches. Pasternack’s PESMA1001-50PK is a dual band antenna operating from 2400 to 2500 MHz with 3.5 dBi gain and 4900 to 5825 MHz with 5 dBi gain. Our high-quality 50-pack omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1001-50PK 50-pack stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $175.99
10 : $168.95
25 : $161.91
100 : $154.87

PE3CA1007-3

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: HMCX32 1.2, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Female Bulkhead to HMCX32 1.2 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to HMCX32 1.2 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and HMCX32 1.2 cable connection on the other. Our SMA to HMCX32 1.2 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to HMCX32 1.2 cable is a female to plug coax assembly, PE3CA1007-3, can also be known as a SMA jack to HMCX32 1.2 male cable assembly and will be shipped same-day as it is purchased. SMA jack to HMCX32 1.2 male cable assembly PE3CA1007-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to HMCX32 1.2 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to HMCX32 1.2 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1007-3 can also be used in the other direction and will be HMCX32 1.2 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to HMCX32 1.2 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to HMCX32 1.2 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS.

1 : $20.59
25 : $19.56
50 : $18.53
100 : $17.71

PE15A1005

Pasternack Enterprises

Key Specifications, Gain: 40 dB, Power Output: 15 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.4 GHz, Noise Figure, Max: 1.5 dB, Design: High Gain, Voltage, DC Max: 13.2 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 40 dB Gain, 1.5 dB NF, 15 dBm P1dB, 1.2 GHz to 1.4 GHz, Low Noise High Gain Amplifier SMA. PE15A1005 high gain amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized high gain amplifier uses SMA connectors at 50 Ohm. This SMA high gain amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.4 GHz. The significantly low noise figure of this radio frequency amplifier is 1.5 dB. High gain LNA amplifier PE15A1005 is rated at 13.2 Volts DC maximum and 250 mA. Our high gain radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave high gain amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,040.0
5 : $998.4
10 : $956.8

PE70A1008

Pasternack Enterprises

Key Specifications, Design: Step, Maximum Frequency: 1,000 MHz, Impedance: 75 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.37:1, Connector Series 1: F, Connector Gender 1: Female, Connector Series 2: F, Connector Gender 2: Female, Minimum Attenuation: 0 dB. 0 to 71 dB Toggle Step Attenuator, 75 Ohm F Female to 75 Ohm F Female Rated to 1 Watt From 0.3 MHz to 1,000 MHz. PE70A1008 is a stepped attenuator from Pasternack. Our type F attenuator is a RF step attenuator design. This 75 Ohm manual step attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack coaxial step attenuator has a female gender for connector 1 and a type F female for connector 2. PE70A1008 steped attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 71 dB with 0dB step sizes. Our RF step attenuator has frequency range of 0.3 MHz to 1 GHz and a maximum VSWR of 1.37. This adjustable BNC attenuator is rated to 1 at the stated attenuation. Our stepped attenuator PE70A1008 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This BNC attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $674.99
5 : $647.99
10 : $620.99

PE15A1009

Pasternack Enterprises

Key Specifications, Gain: 34 dB, Power Output: 11 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 3 GHz, Noise Figure, Max: 1.7 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 105 mA, Connector Series: SMA. 25 dBm IP3, 1.4 dB NF, 11 dBm P1dB, 10 MHz to 3 GHz, Low Noise Amplifier, 34 dB Gain, SMA. PE15A1009 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 3 GHz. The significantly low noise figure of this radio frequency amplifier is 1.7 dB with a typical gain of 34 dB. LNA amplifier PE15A1009 is rated at 15 Volts DC maximum and 105 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,280.0
5 : $1,228.8
10 : $1,177.6

PE3CA1003-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female Bulkhead to UMCX 2.5 Plug Cable 6 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1003-6, can also be known as a SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA jack to UMCX 2.5 male cable assembly PE3CA1003-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1003-6 can also be used in the other direction and will be UMCX 2.5 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS.

1 : $25.89
25 : $24.6
50 : $23.3
100 : $22.27

PE15A1003

Pasternack Enterprises

Key Specifications, Gain: 38 dB, Power Output: 13 dBm Psat, Frequency, Min: 8 GHz, Frequency, Max: 12 GHz, Design: Low Noise, Voltage, DC Max: 13 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 2.2 dB NF, 13 dBm Psat, 8 GHz to 12 GHz, Low Noise Amplifier, 38 dB Gain, SMA. PE15A1003 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 8 GHz and maximum frequency of 12 GHz. LNA amplifier PE15A1003 is rated at 13 Volts DC maximum and 250 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $3,480.0
5 : $3,340.8
10 : $3,201.6

PE3CA1001-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-113mm, RF Cable Type: 1.13mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to UMCX 2.5 Plug Cable 12 Inch Length Using 1.13mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using 1.13mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using 1.13mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1001-12, can also be known as a SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA jack to UMCX 2.5 male cable assembly PE3CA1001-12 is built with 1.13mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1001-12 can also be used in the other direction and will be UMCX 2.5 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using 1.13mm coax, RoHS.

1 : $30.49
25 : $28.97
50 : $27.44
100 : $26.22

PE3CA1001-3

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-113mm, RF Cable Type: 1.13mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Female Bulkhead to UMCX 2.5 Plug Cable 3 Inch Length Using 1.13mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to UMCX 2.5 plug cable 3 inch length using 1.13mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to UMCX 2.5 plug cable 3 inch length using 1.13mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1001-3, can also be known as a SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA jack to UMCX 2.5 male cable assembly PE3CA1001-3 is built with 1.13mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1001-3 can also be used in the other direction and will be UMCX 2.5 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to UMCX 2.5 plug cable 3 inch length using 1.13mm coax, RoHS.

1 : $30.49
25 : $28.97
50 : $27.44
100 : $26.22

PEWCA1002

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-51, Coax Connector Impedance: 50 Ohm, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 15 GHz, Maximum Frequency: 22 GHz. WR-51 Square Cover Flange to SMA Female Waveguide to Coax Adapter Operating from 15 GHz to 22 GHz. PEWCA1002 WR-51 waveguide to coax adapter is also known as a WR-51 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-51 to SMA connector and has a female gender. Our WR-51 to SMA female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-51 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. WR51 waveguide to SMA transition adapter to coax PEWCA1002 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-51 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $690.99
5 : $663.35
10 : $635.71

PE3CA1000-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to UMCX 2.5 Plug Cable 12 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1000-12, can also be known as a SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA jack to UMCX 2.5 male cable assembly PE3CA1000-12 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1000-12 can also be used in the other direction and will be UMCX 2.5 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using 0.81mm coax, RoHS.
RoHS : Compliant

1 : $28.09
25 : $26.69
50 : $25.28
100 : $24.16

Venkel Ltd.

TA100PCJ475MDR0250

VENKEL LTD

Polymer Tantalum Cap J-Lead;100V;PCJ;4.7uF;�20%;D;250mR
RoHS : Compliant

Vyrian

LA100P350-4

Littelfuse Inc

Electric Fuse, Very Fast Blow, 350A, 1000VAC, 750VDC, 100000A (IR), Inline/holder

12,626

RWST30250A1001JB06

Vishay Intertechnologies

Fixed Resistor, Wire Wound, 320W, 1000ohm, 3000V, 5% +/-Tol, 75ppm/Cel, Chassis Mount
RoHS : Compliant

11,786

SR155A100JAA

KYOCERA AVX

Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00001uF, Through Hole Mount

9,794

HSMGA100L02J1CATM2

Broadcom Limited

9,429

LA100URD73TTI1000

Littelfuse Inc

Electric Fuse, Very Fast Blow, 1000A, 1100VAC, 100000A (IR), Inline/holder

9,266

HSMA-A100-R4WJ1

Broadcom Limited

8,559

LA100P800-4

Littelfuse Inc

Electric Fuse, Very Fast Blow, 800A, 1000VAC, 750VDC, 100000A (IR), Inline/holder

7,861

HSMW-A100-S00J1

Broadcom Limited

6,209

LA100P650-4

Littelfuse Inc

Electric Fuse, Very Fast Blow, 650A, 1000VAC, 750VDC, 100000A (IR), Inline/holder

6,209

HSMZA100T00J1CATT2

Broadcom Limited

6,098

AM3874CCYEA100

Texas Instruments

RISC Microprocessor, 32-Bit, 1000MHz, CMOS, PBGA684
RoHS : Compliant

6,090

HSME-A100-M02J1

Broadcom Limited

RoHS : Compliant

4,894

XC7A100T-L1FFG1156C

AMD Xilinx

Field Programmable Gate Array, 7925 CLBs, 1098MHz, 101440-Cell, PBGA1156
RoHS : Compliant

3,361

545BAA100M000BAG

Skyworks Solutions Inc

LVDS Output Clock Oscillator, 100MHz Nom
RoHS : Compliant

681

IDT7130SA100PF8

Integrated Device Technology Inc

Multi-Port SRAM, 1KX8, 100ns, CMOS, PQFP64
RoHS : Not Compliant

638

Waytek, Inc.

AL-MPA-1000-0-C-5M

Advanced Cable Ties Inc

ACT AL-MPA-1000-0-C-5M cable tie mounting base is a black 1" mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and acrylic adhesive backing for organized wire routing and harness support in general-purpose installations.

100 : $0.2629
200 : $0.2429
500 : $0.2208
1,000 : $0.2042
5,000 : $0.1946

6,500

TT-F3A-100RWL

NASON

Temperature Switch UL CSA 100F SPST No Rising 6" UL3173 disc way, no repl

1 : $48.64
5 : $43.44
10 : $40.53
50 : $37.21
100 : $35.54
200 : $33.26

122A10-00M-KA

Eaton Electronics

ShortStop Circuit Breaker 10A Metal Keps Nuts Type 2 BUSSMANN TYPE II

1 : $5.9374
10 : $5.3731
50 : $4.9144
100 : $4.2909
200 : $4.0414
500 : $3.8668

Win Source Electronics

2450AT18A100E

Johanson Technology Inc

Antenna Ceramic -0.5dBi Gain 2500MHz 2-Pin Case 18-4 T/R / ANTENNA CHIP 2.4GHZ
RoHS : Compliant

475 : $0.6378
355 : $0.7114
275 : $0.7359
200 : $0.7604
130 : $0.785
55 : $0.9567

205,647

V23079A1001B301

TE Connectivity

RELAY GENERAL PURPOSE DPDT 2A 5V
RoHS : Compliant

235 : $1.2804
180 : $1.4281
140 : $1.4773
100 : $1.5266
65 : $1.5758
30 : $1.9205

69,387

HSMG-A100-J02J1

Broadcom Limited

LED YELLOW-GRN CLEAR 2PLCC SMD
RoHS : Compliant

730 : $0.411
550 : $0.4584
425 : $0.4742
310 : $0.49
200 : $0.5058
85 : $0.6164

44,000

SJA1000T/N1

Nexperia

IC STAND-ALONE CAN CTRLR 28-SOIC

93 : $3.2502
74 : $3.3824
57 : $3.5145
40 : $3.7787
26 : $3.9108
12 : $4.1751

20,000

SJA1000T/N1118

Nexperia

93 : $3.2502
74 : $3.3824
57 : $3.5145
40 : $3.7787
26 : $3.9108
12 : $4.1751

18,130

SRP1265A-100M

Bourns Inc

FIXED IND 10UH 10A 16.5 MOHM SMD / Inductor Power Shielded Wirewound 10uH 20% 100KHz 20Q-Factor Carbonyl Powder 10A 0.0165Ohm DCR Automotive T/R
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

12,000

CY7C68013A-100AXI

Cypress Semiconductor

EZ-USB FX2LP™ USB Microcontroller
RoHS : Compliant

22 : $13.9773
18 : $14.5455
14 : $15.1137
10 : $16.2501
6 : $16.8182
3 : $17.9546

6,666

CLA100E1200HB

IXYS Integrated Circuits Division

SCR 1.2KV 160A TO247

53 : $5.6664
40 : $6.3202
31 : $6.5382
23 : $6.7561
15 : $6.974
6 : $8.4996

5,000