| Electronic Components Datasheet Search |
|
9993 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | JAND38999/33W11R | Amphenol PCD | Dust Cap - D38999/33 - Recpt Cap - Cadmium RoHS : Compliant |
| 136 | |
| D3899932F17N | Amphenol PCD | Dust Cap - D38999/32 - Plug Cap - Electroless Nickel Plated RoHS : Compliant |
| 100 | ||
| JAND38999/32W9N | Amphenol PCD | Dust Cap - D38999/32 - Plug Cap - Cadmium RoHS : Compliant |
| 61 | ||
| JAND38999/33-K-17-N | Amphenol PCD | Dust Cap - D38999/33 - Receptacle Cap - Passivated RoHS : Compliant |
| 8 | ||
| 519993-000 | TE Connectivity | TXR18AB00A3612AI MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ZW-09-14-LM-D-999-300-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| D38999/33W17N | TE Connectivity | Protective Cover for MIL-DTL-38999 Series Circula RoHS : Compliant |
| 0 | ||
| R21-2-20.0A-39993-2-V | Sensata Circuit Breakers | Cir Brkr HydMag RoHS : Compliant |
| 0 | ||
| D38999/32T23R | TE Connectivity | Connector Accessories Protective Cover With Rope Eyelet Straight Aluminum Alloy/Stainless Steel Nickel-PTFE/Passivated RoHS : Compliant |
| 0 | ||
| 859993N002 | TE Connectivity | Heat Shrink Molded Boot ST Flexible Viton Yellow MOQ Reduction RoHS : Compliant |
| 0 | ||
| 7-1625999-3 | TE Connectivity | Power Resistor - 82 Ohms ±5% - 100W - Chassis Mount - Solder Lugs RoHS : Compliant |
| 0 | ||
| 1999935-9 | TE Connectivity | INSULATION CRIMPER 2.03 (.080) O RoHS : Not Compliant |
| 0 | ||
| 284999-3 | TE Connectivity | 32 POS. KIT ASS'Y FOR AIRBAG V MOQ Reduction RoHS : Compliant |
| 0 | ||
| 229993-4 | TE Connectivity | COVER ADAPTER 50 POS MOQ Reduction RoHS : Compliant |
| 0 | ||
| 9993920000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 4 POS 5.08mm Solder ST Thru-Hole 15A Box RoHS : Compliant |
| 0 | ||
![]() Verical | 999-37246-001 | Carling Technologies | Switch Access Protective Full Hexboot Toggle Switch RoHS : Compliant |
| 3,400 | |
| 999-37245-001 | Carling Technologies | Switch Access Protective Half Hexboot Toggle Switch |
| 2,000 | ||
| 9993510000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 4 POS 5mm Solder Thru-Hole 15A Box |
| 100 | ||
| 999345 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 19 POS 5mm Solder ST Thru-Hole 10A Box RoHS : Must Be Verified |
| 19 | ||
![]() Avnet Americas | D38999/33W19R | Amphenol Corporation | - Bulk (Alt: D38999/33W19R) RoHS : Not Compliant | 490 | ||
| D38999/33W17N | Amphenol Corporation | - Bulk (Alt: D38999/33W17N) RoHS : Not Compliant | 203 | |||
| D38999/33F13R | Amphenol Corporation | - Bulk (Alt: D38999/33F13R) RoHS : Not Compliant | 100 | |||
| D38999/33F25R | Amphenol Corporation | - Bulk (Alt: D38999/33F25R) RoHS : Not Compliant | 93 | |||
| D38999/33W25N | Amphenol Corporation | - Bulk (Alt: D38999/33W25N) RoHS : Not Compliant | 89 | |||
| D38999/33F17R | Amphenol Corporation | - Bulk (Alt: D38999/33F17R) RoHS : Not Compliant | 87 | |||
| D38999/33Z11N | Amphenol Corporation | - Bulk (Alt: D38999/33Z11N) RoHS : Not Compliant | 87 | |||
| D38999/32W11R | Amphenol Corporation | - Bulk (Alt: D38999/32W11R) RoHS : Not Compliant | 86 | |||
| D38999/33F11R | Amphenol Corporation | - Bulk (Alt: D38999/33F11R) RoHS : Not Compliant | 48 | |||
| D38999/33Z13N | Amphenol Corporation | - Bulk (Alt: D38999/33Z13N) RoHS : Not Compliant | 39 | |||
| D38999/32Z9N | TE Connectivity | - Bulk (Alt: D38999/32Z9N) RoHS : Not Compliant |
| 20 | ||
| D38999/32F13N | TE Connectivity | - Bulk (Alt: D38999/32F13N) RoHS : Not Compliant |
| 5 | ||
| D38999/33W19R | Glenair Inc | Dust Cap / Cover, Shell Size 19, Dust Cap with Rope - Bulk (Alt: D38999/33W19R) RoHS : Not Compliant |
| 4 | ||
| D38999/33W25N | Glenair Inc | - Bulk (Alt: D38999/33W25N) RoHS : Not Compliant |
| 4 | ||
| D38999/32F9N | TE Connectivity | - Bulk (Alt: D38999/32F9N) RoHS : Not Compliant |
| 1 | ||
![]() Newark | M20-9993046 | Harwin | Conn, Header, 30Pos, 1Row, 2.54Mm; |Harwin M20-9993046 RoHS : Compliant |
| 1,036 | |
| D38999/33Z17R | Amphenol PCD | Dust Cap W/Rope, Size 17, Rcpt, Alum; Accessory Type:Dust Cover With Rope; For Use With:Amphenol Mil-Dtl-38999 Series Iii Circular Receptacle Connectors; Connector Body Material:Aluminum Alloy Body; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 313 | ||
| D38999/33T19N | TE Connectivity | Cir Conn, D38999/33T19N; |Te Connectivity Deutsch D38999/33T19N RoHS : Not Compliant |
| 39 | ||
| D38999/32W23R | Amphenol PCD | D38999/32 - Plug Cap, Cad Rohs Compliant: No |Amphenol Pcd D38999/32W23R RoHS : Not Compliant |
| 36 | ||
| D3899933Z9R | Amphenol PCD | Conn Cap, Amphenol Pcd D3899933Z9R; |Amphenol Pcd D3899933Z9R RoHS : Not Compliant |
| 25 | ||
| D38999/33Z13N | Amphenol Interconnect India Pvt Ltd | Dust Cap W/ Rope & Ring, Rcpt, Size 13; |Amphenol Interconnect India D38999/33Z13N RoHS : Compliant |
| 20 | ||
| D38999/33W25N | Amphenol PCD | Dust Cap W/ Rope, Rcpt, Size 25; Accessory Type:Dust Cap With Rope & Ring; For Use With:Mil-Dtl-38999 Series Iii Circular Receptacle Connectors; Connector Body Material:Aluminum Alloy Body; Product Range:- Rohs Compliant: No |Amphenol Pcd D38999/33W25N RoHS : Not Compliant |
| 18 | ||
| D38999/33W17N | Amphenol Interconnect India Pvt Ltd | Dust Cap W/ Rope & Ring, Rcpt, Size 17; |Amphenol Interconnect India D38999/33W17N RoHS : Not Compliant |
| 8 | ||
| D38999/32Z11N | Amphenol PCD | Dust Cap W/ Rope, Plug, Size 11; Accessory Type:Dust Cap With Rope & Ring; For Use With:Mil-Dtl-38999 Series Iii Circular Plug Connectors; Connector Body Material:Aluminum Alloy Body; Product Range:- Rohs Compliant: Yes |Amphenol Pcd D38999/32Z11N RoHS : Compliant |
| 7 | ||
| D38999/33W25N | Amphenol Interconnect India Pvt Ltd | Dust Cap W/ Rope & Ring, Rcpt, Size 25; |Amphenol Interconnect India D38999/33W25N RoHS : Not Compliant |
| 6 | ||
| 999398 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Pcb, 10 Position, 24-12Awg; Pitch Spacing:5.08Mm; No. Of Positions:10Positions; Wire Size Awg Min:24Awg; Wire Size Awg Max:14Awg; Conductor Area Csa:1.5Mm²; Wire Connection Method:Screw; Rated Current:10A Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
| D38999/33Z13N | Amphenol PCD | Dust Cap W/ Rope & Ring, Size 13, Alum; Accessory Type:Dust Cap With Rope & Ring; For Use With:Amphenol Mil-Dtl-38999 Series Iii Receptacle Circular Connectors; Connector Body Material:Aluminum Alloy Body Rohs Compliant: Yes |Amphenol Pcd D38999/33Z13N RoHS : Compliant |
| 2 | ||
| D38999/32J17R | Glenair Inc | Cir Conn, Glenair D38999/32J17R; |Glenair D38999/32J17R RoHS : Not Compliant |
| 2 | ||
| 9993320000 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Pcb, 6 Position, 24-12Awg; Pitch Spacing:5Mm; No. Of Positions:6Positions; Wire Size Awg Min:24Awg; Wire Size Awg Max:14Awg; Conductor Area Csa:1.5Mm²; Wire Connection Method:Screw; Rated Current:10A Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
| D38999/33W19R | Glenair Inc | Cir Conn, Glenair D38999/33W19R; |Glenair D38999/33W19R RoHS : Not Compliant |
| 1 | ||
![]() RS | HEX SEAL BOOT (999-37246-001|HEX SEAL BOOT|HEX SEAL BOOT) | Carling Technologies | TOGGLE SWITCH GUARD, FLEXIBLE SILICONE, TEAR-RESISTANT, 15/32" BRASS HEXNUT |
| 2,746 | |
| 499933 | RS Pro | ALUMINUM POTENTIOMETER KNOB DIA. 18MM 6.4MM SHAFT |
| 367 | ||
| 1499939 | Phoenix Contact | TCP 32DC/5A F, F FAST TRIP, THERMAL DEVICE CIRCUIT BREAKER RoHS : Compliant |
| 99 | ||
| D38999/33W19R | Amphenol PCD | SERIES III TV DUST CAP RECEPTACLE SIZE 19 ROPE MIL-DTL-38999 THREADED |
| 39 | ||
| 1SNA399937R2300 (039993723) | TE Connectivity | FEDAD11 END SECTION, ENTRELEC |
| 20 | ||
| 399934 | RS Pro | HALOGEN FREE HEAT SHRINK TUBING 2:1 CLEAR POLYOLEFIN 0.25/0.13IN 4FT LENGTH |
| 18 | ||
| 5-1625999-3 | TE Connectivity | ALUM HOUSED SOLDER LUG WIRE WOUND PMNT RESISTOR,470MOHM +/-5% 100W RoHS : Compliant |
| 16 | ||
| D38999/32W21R | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 21 ROPE MIL-DTL-38999 THREADED |
| 6 | ||
| 2299939 | RS Pro | AUDIO CABLE ASSEMBLY MALE 3.5MM JACK-MALE 3.5MM JACK 66FT LENGTH |
| 5 | ||
| 09140009993 | HARTING Technology Group | GUIDE ELEMENT, WT 1.20 G, POLYCARBONATE, BLACK, HAN-MODULAR SERIES RoHS : Compliant |
| 4 | ||
| MS6-LR-1/2-D7-AS (529993) | Festo | PRESSURE REGULATOR, 0.5 TO 12 BAR, G 1/2 PORTS, WITH GAUGE, MS SERIES |
| 3 | ||
| D38999/32W11R | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 11 ROPE MIL-DTL-38999 THREADED |
| 2 | ||
| D38999/32W17R | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 17 ROPE MIL-DTL-38999 THREADED |
| 1 | ||
| D38999/32W25R | Amphenol PCD | SERIES III TV DUST CAP RECEPTACLE SIZE 25 ROPE MIL-DTL-38999 THREADED |
| 1 | ||
| BSM 12-999-3/S101 (U0988-23) | TURCK Inc | BSM 12-999-3/S101, U0988-23 |
| 1 | ||
![]() Bisco Industries | 399-93-103-10-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 1,391 | ||
| 399-93-120-10-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 154 | |||
| 399-93-107-10-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 50 | |||
| 399-93-102-10-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 40 | |||
| 299-93-324-11-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 30 | |||
| D38999/32F19R | Amphenol PCD | 19 | ||||
| 399-93-106-10-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 15 | |||
| D38999/32W25N | MIL-SPEC Connectors | 14 | ||||
| 19993-B-0350-28 | Amatom Electronic Hardware | 10 | ||||
| 299993 | MISCELLANEOUS | 10 | ||||
| 299-93-316-10-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 6 | |||
| D38999/32W17R | MIL-SPEC Connectors | 5 | ||||
| D38999/33M13N | Glenair Inc | RoHS : Compliant | 4 | |||
| 299-93-618-10-002000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 2 | |||
| D38999/32J13R | Glenair Inc | 1 | ||||
![]() Onlinecomponents.com | 173300-9993 | Molex | SpeedEdge 173300 ROHS3Compliant Dual Female (Card Type) Connector -40C~105C 30.0muin 0.76mum RoHS : Compliant |
| 79,500 | |
| 9993-060100 | Belden Inc | COMPUTER CABLE, POLYETHYLENE INSULATE, 24AWG STRAND (7X32), 12 PAIRS CHROME RoHS : Compliant |
| 0 | ||
| 9993-0601000 | Belden Inc | COMPUTER CABLE, POLYETHYLENE INSULATE, 24AWG STRAND (7X32), 12 PAIRS CHROME RoHS : Compliant |
| 0 | ||
| 771-9993/205-205 | WAGO Innovative Connections | pre-assembled connecting cable - Eca - Plug/open-ended - 3-pole - Cod. B - H05VV-F 3 x 1.0 mm² - 2 m - 1,00 mm² - light green RoHS : Compliant |
| 0 | ||
| 771-9993/205-405 | WAGO Innovative Connections | pre-assembled connecting cable - Eca - Plug/open-ended - 3-pole - Cod. B - H05VV-F 3 x 1.0 mm² - 4 m - 1,00 mm² - light green RoHS : Compliant |
| 0 | ||
| 771-9993/205-305 | WAGO Innovative Connections | pre-assembled connecting cable - Eca - Plug/open-ended - 3-pole - Cod. B - H05VV-F 3 x 1.0 mm² - 3 m - 1,00 mm² - light green RoHS : Compliant |
| 0 | ||
| 771-9993/216-101 | WAGO Innovative Connections | pre-assembled connecting cable - Eca - Plug/open-ended - 3-pole - Cod. A - H05Z1Z1-F 3G 1.5 mm² - 1 m - 1,50 mm² - black RoHS : Compliant |
| 0 | ||
| 9993-CHR-100 | Belden Inc | COMPUTER CABLE, POLYETHYLENE INSULATE, 24AWG STRAND (7X32), 12 PAIRS CHROME RoHS : Compliant |
| 0 | ||
| 771-9993/017-301 | WAGO Innovative Connections | pre-assembled interconnecting cable - Eca - Socket/plug - 3-pole - Cod. A - H05Z1Z1-F 3G 2.5 mm² - 3 m - 2,50 mm² - black RoHS : Compliant |
| 0 | ||
| 9993-CHR-1000 | Belden Inc | COMPUTER CABLE, POLYETHYLENE INSULATE, 24AWG STRAND (7X32), 12 PAIRS CHROME RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD9993BBCZ | Analog Devices Inc | Telecom Circuit, 1-Func, PBGA196 RoHS : Compliant |
| 5 | |
MPC9993FA![]() | Freescale Semiconductor | Clock Generators and Synthesizers PLL Clock Driver, Dynamic Clock Switch 200MHz 32-QFP Tray RoHS : Compliant |
| 250 | ||
| MAX9993ETP | Maxim Integrated Products | Down Converter RoHS : Not Compliant |
| 5,189 | ||
| MAX9993ETP-TG069 | Maxim Integrated Products | MAX9993 High-Linearity 1700Mhz To 2200Mhz Down-Conversion Mixer With Lo Buffer/Switch RoHS : Not Compliant |
| 2,500 | ||
| 1099934 | Qorvo | 2.5-6 GHz 30 W HPA RoHS : Compliant |
| 32 | ||
![]() Sager | 499-93-214-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | |
| 399-93-136-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings Interconnect Header RoHS : Not Compliant |
| 0 | ||
| S555-5999-39-F | Bel Fuse | Audio Transformers / Signal Transformers | 0 | |||
| 499-93-258-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant | 0 | |||
| 399-93-114-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings Interconnect Header RoHS : Not Compliant |
| 0 | ||
| 399-93-121-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings Interconnect Header RoHS : Not Compliant |
| 0 | ||
| R21-2-20.0A-39993-2-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr,HydMag |
| 0 | ||
| 499-93-230-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| 399-93-102-10-003-000 | Mill-Max Mfg Corp | Headers & Wire Housings |
| 0 | ||
| 399-93-103-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings 3 POS RT ANG 7 ROW RoHS : Not Compliant |
| 0 | ||
| 1999935-9 | TE Connectivity | Crimpers / Crimping Tools INSULATION CRIMPER 2.03 .080 O | 0 | |||
| 299-93-320-10-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| 229993-4 | TE Connectivity | Headers & Wire Housings COVER ADAPTER 50 POS | 0 | |||
| 499-93-236-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant | 0 | |||
| 399-93-158-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings Interconnect Header RoHS : Not Compliant |
| 0 | ||
![]() TME | M20-9993645 | Harwin | Connector: pin strips; pin header; male; data; PIN: 36; 2.54mm; 1x36 RoHS : Compliant |
| 129 | |
| D38999/32T21N | TE Connectivity | Protection cover; MIL-DTL-38999 Series III; straight RoHS : Compliant |
| 84 | ||
| 68999-3329 | Molex | 68999-3329 |
| 41 | ||
| D38999/32T13N | TE Connectivity | Protection cover; MIL-DTL-38999 Series III; straight RoHS : Compliant |
| 36 | ||
| 999345 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; 300V; PIN: 19; tinned |
| 19 | ||
| 9993 | SOLID TOOLS | Stretch; L: 100m; Width: 0.5m; blue; self-adhesive |
| 12 | ||
| D38999/33F25R | Amphenol Aerospace | Protection cover; MIL-DTL-38999 Series III; size 25; silver |
| 10 | ||
| D38999/33T21R | TE Connectivity | Protection cover; straight RoHS : Compliant |
| 8 | ||
| 1625999-3 | TE Connectivity | Resistor: wire-wound; 10Ω; with heatsink; screw; 100W; ±5%; 1.9kV RoHS : Compliant |
| 5 | ||
| D38999/33F17R | Amphenol Aerospace | Protection cover; MIL-DTL-38999 Series III; size 17; silver |
| 1 | ||
| 9993940000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 15A; 300V RoHS : Compliant |
| 0 | ||
| 1199930000 | Weidmüller Interface GmbH & Co. KG | 1199930000 RoHS : Compliant |
| 0 | ||
| 2499930000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 41A; 1kV RoHS : Compliant |
| 0 | ||
| 9993930000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 15A; 300V RoHS : Compliant |
| 0 | ||
| 09200009993 | HARTING Technology Group | Gasket; Han 16 A FLANSCHGUMMIDICHTUNG RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | M20-9993646 | STMicroelectronics | 18 | |||
![]() Interstate Connecting Components | D38999/32K21R | Amphenol PCD | 38999 SIII PLUG D/C SZ 21 SS PASS SS ROPE |
| 1 | |
| 519993-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR18AB00A3612AI RoHS : Not Compliant | 0 | |||
| D38999/32K21R | Glenair Inc | 38999 CAP PLG SZ 21 RoHS : Compliant | 0 | |||
| D38999/32K21R | Conesys | PROTECTIVE COVER PLUG | 0 | |||
| D38999/32S19C | Glenair Inc | 38999 CAP PLG SZ 9 | 0 | |||
| D38999/32W23N | Glenair Inc | 38999 CAP PLG SZ 23 RoHS : Not Compliant |
| 0 | ||
| D38999/32W23N | SOURIAU-SUNBANK | 38999 PLG CAP SZ23 | 0 | |||
| D38999/32W23N | Amphenol PCD | 38999 SIII PLUG D/C SZ 23 OD CAD SS ROPE & RING |
| 0 | ||
| D38999/32Z11N | Conesys | DUST CAP PLUG 38999 SIII | 0 | |||
| D38999/32Z11N | Amphenol PCD | 38999 SIII PLUG D/C SZ 11 BLK ZINC NICKEL SS ROPE & RING |
| 0 | ||
| D38999/32Z11N | Glenair Inc | 38999 CAP PLG SZ 11 |
| 0 | ||
| D38999/32Z21C | Amphenol PCD | D3899932Z21C | 0 | |||
| D38999/32Z21C | Glenair Inc | 38999 CAP PLG SZ 21 | 0 | |||
| D38999/33A11R | Amphenol PCD | 38999 SIII RECEPT D/C SZ 11 ANODIZED BLK SS ROPE | 0 | |||
| D38999/33J25N | Amphenol PCD | D3899933J25N | 0 | |||
![]() PEI Genesis | D38999/33N9N | Amphenol PCD |
| 94 | ||
| D38999/33W19R | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 91 | ||
| D38999/32-F-19-C | Amphenol PCD |
| 0 | |||
| D38999/32-W-9-C | Amphenol PCD |
| 0 | |||
| D38999/32-Z-17-C | Amphenol PCD |
| 0 | |||
| D38999/32W23N | Amphenol PCD |
| 0 | |||
| D38999/32W23N | SOURIAU-SUNBANK |
| 0 | |||
| D38999/32W23N | SOURIAU-SUNBANK |
| 0 | |||
| D38999/32Z11N | Amphenol PCD |
| 0 | |||
| D38999/32Z11N | Amphenol Corporation |
| 0 | |||
| D38999/32Z21C | Amphenol PCD |
| 0 | |||
| D38999/33-M-15-C | Amphenol PCD |
| 0 | |||
| D38999/33M13N | Amphenol PCD |
| 0 | |||
| D38999/33M23C | Amphenol PCD |
| 0 | |||
| D38999/33W19R | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
![]() Powell Electronics | D38999/33W19R | Amphenol PCD | 38999S3 D/C RECP SZ 19 CAD OD |
| 1,099 | |
| D38999/33W25N | SPI Connects | D38999 Series III Receptacle Cover,Rope, |
| 197 | ||
| D38999/33W19R | SPI Connects | D38999 Series III Plug Cover,Chain,Rope, |
| 67 | ||
| D38999/33N9N | Amphenol PCD | 38999S3 D/C RECP SZ 9 SS |
| 62 | ||
| D38999/33N9R | Amphenol PCD | 38999S3 D/C RECP SZ 9 SS |
| 44 | ||
| D38999/33H11N | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 17 | ||
| D38999/33H21C | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 17 | ||
| D38999/33N9N | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 15 | ||
| D38999/32J25R | Amphenol PCD | D38999S3 D/C PLUG 25 COMP CAD |
| 15 | ||
| D38999/33M13N | Glenair Inc | COMPOSITE - PROTECTIVE COVERS RoHS : Compliant |
| 2 | ||
| D38999/33W19R | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Not Compliant |
| 2 | ||
| D38999/32W23R | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Not Compliant |
| 2 | ||
| D38999/32Z11N | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 1 | ||
| D38999/33M13R | Amphenol PCD | D38999S3 D/C RECPT 13 COMP NIC |
| 1 | ||
| D38999/33W25N | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Not Compliant |
| 1 | ||
![]() PUI | D38999/33W13N | MISCELLANEOUS | 14 | |||
| D38999/32W13N | Amphenol Corporation | RoHS : Not Compliant | 5 | |||
![]() Richardson RFPD | R929993006 | Radiall | MISC CONNECTOR | 0 | ||
| 10019993 | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 15V/-5V 3W 6-Pin SMD Modu RoHS : Compliant |
| 0 | ||
| SI5395P-A09993-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 644.53125MHz RoHS : Compliant | 0 | |||
| SI5395P-A09993-GMR | Skyworks Solutions Inc | 12-Channel Jitter Attenuator/Clock Multiplier with RoHS : Compliant | 0 | |||
| R929993000 | Radiall | BANANA / 2MM SERIE FEMALE 20-WAY 6MM SOLDER POT BL RoHS : Compliant |
| 0 | ||
| R929993003 | Radiall | Banana/2mm Female 20-Way 6mm Solder Pot Black RoHS : Not Compliant |
| 0 | ||
![]() Chip 1 Exchange | 120-89993-ES17 | Murata Manufacturing Co Ltd | INSTOCK | 572 | ||
| SII 9993CT100TR | SI | INSTOCK | 380 | |||
| 120-89993-ES04 | Murata Manufacturing Co Ltd | INSTOCK | 326 | |||
| D38999/32M15R | Glenair Inc | INSTOCK RoHS : Compliant | 50 | |||
| SIL9993CT100 | Vishay Siliconix | INSTOCK | 32 | |||
| D38999/33W21R | INSTOCK | 3 | ||||
| D38999/33W15R | INSTOCK | 2 | ||||
![]() Avnet Abacus | 1599993 | Phoenix Contact | RC12S2N12Y300 RC12S2N12Y300 (Alt: 1599993) RoHS : Compliant | 17 | ||
| 9993710000 | Weidmüller Interface GmbH & Co. KG | LM50024135 35 SW PCB Terminals (Alt: 9993710000) RoHS : Compliant | 0 | |||
| 519993-000 | TE Connectivity | (Alt: 519993-000) RoHS : Not Compliant | 0 | |||
| M20-9993046 | Harwin | 254mm 01 Pitch SIL Vertical PC Tail Pin Header 61mm mating pin height tin 30 contacts (Alt: M20-9993046) RoHS : Compliant | 0 | |||
| D38999/32W23N | Amphenol Corporation | 19530176600 (Alt: D38999/32W23N) RoHS : Not Compliant | 0 | |||
| D38999/32W23N | Glenair Inc | (Alt: D38999/32W23N) RoHS : Compliant | 0 | |||
| D38999/32Z11N | Amphenol Corporation | D38999 DUST CAP (Alt: D38999/32Z11N) RoHS : Compliant | 0 | |||
| D38999/32Z11N | Glenair Inc | (Alt: D38999/32Z11N) RoHS : Compliant | 0 | |||
| D38999/33W19R | Glenair Inc | Dust Cap Cover Shell Size 19 Dust Cap with Rope (Alt: D38999/33W19R) RoHS : Compliant | 0 | |||
| D38999/33W19R | Amphenol Corporation | (Alt: D38999/33W19R) RoHS : Not Compliant | 0 | |||
| D38999/32F15N | Amphenol Corporation | D38999 DUST CAP (Alt: D38999/32F15N) RoHS : Not Compliant | 0 | |||
| D38999/32F15N | Glenair Inc | (Alt: D38999/32F15N) RoHS : Compliant | 0 | |||
| D38999/32W23R | Amphenol Corporation | (Alt: D38999/32W23R) RoHS : Not Compliant | 0 | |||
| D38999/32Z11R | Amphenol Corporation | (Alt: D38999/32Z11R) RoHS : Compliant | 0 | |||
| D38999/32Z11R | Glenair Inc | (Alt: D38999/32Z11R) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | D38999/32W11R | Amphenol Corporation | (Alt: D38999/32W11R) RoHS : Compliant | 0 | ||
| D38999/32W21R | Amphenol Corporation | (Alt: D38999/32W21R) RoHS : Compliant | 0 | |||
| 0859993255 | Molex | Dust Cover, 44915 Series, Black, RJ45, RJ45 8 Position Modular Jack Connector, -40 to 85 ?C (Alt: 0859993255) RoHS : Compliant | 0 | |||
| D38999/33W13N | Amphenol Corporation | (Alt: D38999/33W13N) RoHS : Compliant | 0 | |||
| D38999/32Z25R | Amphenol Corporation | (Alt: D38999/32Z25R) RoHS : Compliant | 0 | |||
| B39222B9993L210 | Qualcomm RFFE Filter Products | SAW RF 2IN1 FILTER INPUT DIPLEX BAND 25+ (Alt: B39222B9993L210) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 0859993256 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,244 | |
| 85999-3256 | Molex | IN STOCK SHIP TODAY |
| 8,244 | ||
| 999353 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 920 | ||
| 9993530000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 920 | ||
| S557-5999-36 | Bel Fuse | IN STOCK SHIP TODAY | 390 | |||
| 499934-4 | TE Connectivity | IN STOCK SHIP TODAY | 241 | |||
| S553-5999-32 | Bel Fuse | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| 399-93-108-10-003000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 95 | ||
| S558-5999-39 | Bel Fuse | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11 | ||
| D38999/33W11R | Glenair Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 9 | ||
| 999355 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 5 | ||
| D38999/33W19R | Glenair Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| D38999/33W23N | ITT Interconnect Solutions | IN STOCK SHIP TODAY |
| 2 | ||
| JAND38999/33W23N | ITT Interconnect Solutions | IN STOCK SHIP TODAY |
| 2 | ||
![]() DB Roberts | 99939 | Avdel | DS5.5X255 DRIL CS 00250 | 0 | ||
| 20599935 | Essentra Components | 20MMX20MM 1.5MMWT SQUARE INSER | 0 | |||
| 1439993 | Essentra Components | 0 | ||||
| 71213-99993 | Avdel | SEAL KIT NG HEAD PISTON | 0 | |||
| 09-993-SS-0 | RAF Electronic Hardware | 0 | ||||
![]() ECCO | JAND38999/33-M-19-R | Amphenol PCD |
| 25 | ||
| D3899933M19R | Amphenol PCD |
| 25 | |||
![]() FDH Electronics | D38999/33W19R | Amphenol PCD | Connector Acc |
| 906 | |
| D38999/33K19N | Aero-Electric Connector Inc | Connector Acc | 117 | |||
| D38999/32Z11R | Amphenol PCD | Connector Acc |
| 92 | ||
| D38999/32W23N | SPI Connects | Connector Acc |
| 30 | ||
| D38999/33J25N | Glenair Inc | Connector Acc |
| 17 | ||
| D38999/32Z11N | Amphenol PCD | Connector Acc |
| 6 | ||
| D38999/32T11N | TE Connectivity | Connector Acc RoHS : Compliant | 3 | |||
| D38999/33K19N | Glenair Inc | Backshells & Ac RoHS : Compliant | 2 | |||
| D38999/33M13N | Glenair Inc | Backshells & Ac RoHS : Compliant |
| 1 | ||
| D38999/33W19R | TE Connectivity | Backshells & Ac RoHS : Not Compliant | 1 | |||
| D38999/33K15N-P146 | FDH Electronics | Backshells & Ac | 1 | |||
| D38999/32F15N | Amphenol PCD | Connector Acc |
| 0 | ||
| D38999/32F15N | SPI Connects | Connector Acc |
| 0 | ||
| D38999/32W23R | Amphenol PCD | Connector Acc |
| 0 | ||
| D38999/33C9R | SPI Connects | Backshells & Ac |
| 0 | ||
![]() Neutron USA | 9993940000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LM 5.08/06/90 3.5SN BK BX RoHS : Compliant |
| 50 | |
| D38999/32W19R | Amphenol Corporation | Circular MIL Spec Tools, Hardware & Accessories Plug Cap Size 19 w/ Rope for 38999 III RoHS : Not Compliant |
| 50 | ||
| 7000-99931-0000000 | Murrelektronik GmbH | Standard Circular Connector PROTECTION CAP FOR M12 FEMALE FLANGE PLUGS RoHS : Compliant |
| 50 | ||
| 9993960000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LM 5.08/08/90 3.5SN BK BX RoHS : Compliant |
| 50 | ||
| D38999/33Z11R | Amphenol Corporation | Circular MIL Spec Tools, Hardware & Accessories SZ 11 RECP COVER |
| 50 | ||
| 1619993 | Phoenix Contact | Circular Metric Connectors CA-06S1N122S00 RoHS : Compliant |
| 50 | ||
| 9993340000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LM 5.00/08/90 3.5SN BK BX RoHS : Compliant |
| 43 | ||
| 09060009993 | HARTING Technology Group | DIN 41612 Connectors DIN-POWER LOCKING SCREW D20 RoHS : Compliant |
| 0 | ||
| 1499939 | Phoenix Contact | Thermal device Circuit Breaker, TCP 32DC/5A F, 1pos, Male, 5A 32VDC, pluggable RoHS : Compliant |
| 0 | ||
| 09060019993 | HARTING Technology Group | DIN 41612 Connectors DIN Power fixing screw D20 |
| 0 | ||
| 09140009993 | HARTING Technology Group | Heavy Duty Power Connectors Han-Modular Guard guiding, black RoHS : Compliant |
| 0 | ||
| BSM BSM 12-999-3/S101 | TURCK Inc | Cordset, Str M16 Male 12 pos to Str M16 Male 12 pos, Black, 12 cond 22AWG 3M, Flexlife-20/ CTRACK |
| 0 | ||
| 179993 | Warrick | Liquid Stainless Steel Flow Meter 107bar Pressure Maximum of 0.5 gal/min |
| 0 | ||
| BSM 12-999-3/S101 | TURCK Inc | Cordset, Str M16 M 12pos to cut end, 12wire 22AWG 3m, TPE Jacket Black, U0988-23 |
| 0 | ||
| 9993320000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LM 5.00/06/90 3.5SN BK BX RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W09999-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Low PIM Cable 36 Inch Length Using SPP-375-LLPL Coax., Radio frequency assembly N male to N male low PIM cable 36 inch length using SPP-375-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male low PIM cable 36 inch length using SPP-375-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3W09999-36, can also be known as a low PIM N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W09999-36 is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low PIM cable 36 inch length using SPP-375-LLPL coax. |
| 37 | |
| PE3C9993-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to TNC Female Low Loss Cable 48 Inch Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 48 inch length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 48 inch length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993-48 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993-48 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993-48 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993-48 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9993 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Low Loss Cable Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C9993-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to TNC Female Low Loss Cable 36 Inch Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 36 inch length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 36 inch length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993-36 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993-36 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993-36 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993-36 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9993/HS | Pasternack Enterprises | 0 | ||||
| PE3C9993-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to TNC Female Low Loss Cable 200 cm Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 200 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 200 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993-200CM can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993-200CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993-200CM can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7999-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C7999-36 can also be known as a low PIM type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7999-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7999-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7999-36 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C9993-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to TNC Female Low Loss Cable 100 cm Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 100 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 100 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993-100CM can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993-100CM can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9993-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Female Low Loss Cable 24 Inch Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 24 inch length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 24 inch length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993-24 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993-24 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993-24 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993-24 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W19993 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to Banana Plug Cable Using RG142 Coax. PE3W19993 is a SMB jack bulkhead to Banana plug cable using RG142 coax. This Pasternack SMB jack bulkhead to Banana plug cable assembly uses a 50 Ohm SMB for connector 1 and a Banana for connector 2. Our jack SMB bulkhead to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19993 SMB jack bulkhead to Banana plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W09993LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. QN Male Right Angle to 7/16 DIN Male Cable Using RG393 Coax with HeatShrink, LF Solder. PE3W09993LF/HS is a QN male right angle to 7/16 DIN male cable using RG393 coax. This Pasternack QN male right angle to 7/16 DIN male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. QN right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QN right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09993LF/HS QN male right angle to 7/16 DIN male cable assembly is constructed with RG393 coax. | 0 | |||
| PE3999-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-P, RF Cable Type: RG58-P, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Length Using RG58-P Coax., Radio frequency assembly BNC male to BNC male cable 36 inch length using RG58-P coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 36 inch length using RG58-P coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3999-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3999-36 is built with RG58-P which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch length using RG58-P coax. |
| 0 | ||
![]() Vyrian | MAX19993ETX-T | Analog Devices (Maxim Integrated) | 10,998 | |||
| AD9993BBCZRL | Analog Devices Inc | Telecom Circuit, 1-Func, PBGA196 RoHS : Compliant | 8,314 | |||
| D38999/33W19R | Amphenol Corporation | Metal RoHS : Not Compliant | 4,415 | |||
| JAND38999/33W21N | Amphenol Corporation | Connector Accessory, Protective Cover, Aluminium | 813 | |||
| JAND38999/32W23R | Amphenol Corporation | Connector Accessory, Protective Cover, Aluminium | 713 | |||
| JAND38999/33W11R | Amphenol Corporation | Connector Accessory, Protective Cover, Aluminium | 698 | |||
| JAND38999/32W21R | Amphenol Corporation | Connector Accessory, Protective Cover, Aluminium | 680 | |||
| D38999/32W23R | Amphenol Corporation | Metal RoHS : Not Compliant | 658 | |||
| JAND38999/33W17N | Amphenol Corporation | Connector Accessory, Protective Cover, Aluminium | 647 | |||
| D38999/32W21R | Defense Logistics Agency | Metal | 622 | |||
| JAND38999/33F25N | Amphenol Corporation | Connector Accessory, Protective Cover | 583 | |||
| D38999/33W09N | Defense Logistics Agency | Connector Accessory, Protective Cover, Aluminum | 482 | |||
| D38999/32W25R | Amphenol Corporation | Metal RoHS : Not Compliant | 481 | |||
| D38999/32W17R | Amphenol Corporation | Metal RoHS : Not Compliant | 476 | |||
| JAND38999/32F13N | Amphenol Corporation | Connector Accessory, Protective Cover | 364 | |||
![]() Win Source Electronics | MAX9993ETP | Maxim Integrated Products | IC MIXER DOWN CONV 20-TQFN RoHS : Not Compliant |
| 2,500 | |
| MAX9993ETP+T | Maxim Integrated Products | IC MIXER 1.7-2.2GHZ DWN 20TQFN RoHS : Compliant |
| 2,390 | ||
| MAX9993ETP-T | Maxim Integrated Products | IC MIXER DOWN CONV 20-TQFN RoHS : Not Compliant |
| 2,390 | ||
| D38999/33W15N | Glenair Inc | DUST CAP RoHS : Not Compliant |
| 85 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |