| Electronic Components Datasheet Search |
|
9950 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 9950002566 | ITT Interconnect Solutions | AB 10SL RET RING CAD/OD |
| 298 | |
| 9950002582 | ITT Interconnect Solutions | Conn Rectangular Multi Port and have Signal and Power, Coaxial Contact For Same Port RoHS : Compliant |
| 150 | ||
| 9950002665 | ITT Interconnect Solutions | AB SPLIT 08 10SL E/B CAD/OD |
| 127 | ||
| 995-0002-299 | ITT Interconnect Solutions | Circular Micro Band 1/8 Inch Wide RoHS : Compliant |
| 90 | ||
| 9950 | ebm-papst | AC Fan Axial Sintec Bearing 230V 68.9CFM 37dB 119 X 119 X 25.4mm RoHS : Compliant |
| 18 | ||
| 995-0002-299 | ITT Interconnect Solutions | Circular Micro Band 1/8 Inch Wide RoHS : Compliant |
| 11 | ||
| 9950 | ebm-papst | AC Fan Axial Sintec Bearing 230V 68.9CFM 37dB 119 X 119 X 25.4mm RoHS : Compliant |
| 10 | ||
| 9950002319 | ITT Interconnect Solutions | AB 00 20 SHL BLK ZINC |
| 9 | ||
| 9950002514 | ITT Interconnect Solutions | AB 06/08 10SL C/N CAD/OD |
| 5 | ||
| 9950001913 | ITT Interconnect Solutions | Insertion Tool RoHS : Not Applicable |
| 5 | ||
| 995-0001-964 | ITT Interconnect Solutions | KPSE Extraction Tool RoHS : Not Applicable |
| 4 | ||
| 9950001737 | ITT Interconnect Solutions | 9950001737 |
| 1 | ||
| 9950001966 | ITT Interconnect Solutions | Extraction Tool RoHS : Not Applicable |
| 1 | ||
| 995-0001-192 | ITT Interconnect Solutions | Hardware Tool |
| 1 | ||
| 995-0001-716 | ITT Interconnect Solutions | Insertion Tool For MIL-DTL-38999 Series I, II, III Connectors RoHS : Not Applicable |
| 1 | ||
![]() Avnet Americas | S99-50239 | Infineon Technologies AG | S99-50239 - Bulk (Alt: S99-50239) RoHS : Compliant |
| 5,600 | |
| 995-0002-281 | ITT Interconnect Solutions | - Bulk (Alt: 995-0002-281) RoHS : Compliant |
| 1,245 | ||
| 995-010040-63-R | TE Connectivity | - Bulk (Alt: 995-010040-63-R) RoHS : Compliant | 455 | |||
| 9995090000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 9995090000) RoHS : Not Compliant |
| 400 | ||
| 995-0002-299 | ITT Interconnect Solutions | - Bulk (Alt: 995-0002-299) RoHS : Compliant |
| 69 | ||
| M85049/9-50W | Glenair Inc | - Bulk (Alt: M85049/9-50W) RoHS : Not Compliant |
| 0 | ||
| 3139950000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 3139950000) RoHS : Not Compliant | 0 | |||
| Y60714K99950T9L | VPG Foil Resistors | Ultra-High Precision Resistor Metal Foil 4.9995kOhm 0.01% Bulk - Bulk (Alt: Y60714K99950T9L) RoHS : Compliant |
| 0 | ||
| 2049950500 | Weidmüller Interface GmbH & Co. KG | SAIL-M12BG-S3-5.0PK16 - Bulk (Alt: 2049950500) RoHS : Not Compliant |
| 0 | ||
| 2439950000 | Weidmüller Interface GmbH & Co. KG | Connector Wire to Board Male Header 6 Position 2.5mm Straight Solder Through Hole Black Box - Bulk (Alt: 2439950000) RoHS : Not Compliant |
| 0 | ||
| 2569950050 | Weidmüller Interface GmbH & Co. KG | IE-FM5D2UE0005MSDESDEX - Bulk (Alt: 2569950050) RoHS : Not Compliant |
| 0 | ||
| Y169950R00009L | VPG Foil Resistors | V/N 302548-1 GF.50R0000 131534 - Bulk (Alt: Y169950R00009L) RoHS : Not Compliant |
| 0 | ||
| 049995-000 | TE Connectivity | TXR75AB00-1606BI - Boxed Product (Development Kits) (Alt: 049995-000) RoHS : Not Compliant |
| 0 | ||
| SGM66099-5.0XTDI6G/TR | SG Micro Corp | B43642C9227M82 - Tape and Reel (Alt: SGM66099-5.0XTDI6G/TR) RoHS : Not Compliant |
| 0 | ||
| CGPT-19/9.5-0-STK | TE Connectivity | CGPT-19/9.5-0-STK - Bag (Alt: 5069872029) RoHS : Not Compliant |
| 0 | ||
![]() Arrow Electronics | 995-0002-299 | ITT Interconnect Solutions | Circular Micro Band 1/8 Inch Wide RoHS : Compliant |
| 11 | |
![]() Newark | 208299-5001 | Molex | Contact, Socket, 24-22Awg, Crimp; |Molex 208299-5001 RoHS : Compliant |
| 23,485 | |
| 208299-5001 | Molex | Contact, Socket, 24-22Awg, Crimp; |Molex 208299-5001 RoHS : Compliant |
| 11,922 | ||
| SP99502VBNC | METZ CONNECT USA | Terminal Block, Pluggable, 2Pos, 14Awg; |Metz Connect SP99502VBNC RoHS : Compliant |
| 4,390 | ||
| 9995 0601000 | Belden Inc | 25 Fs Pr #24 Pe Pvc; |Belden 9995 0601000 RoHS : Not Compliant |
| 2,000 | ||
| 99950-S000 | 3M Interconnect | Conn, Rcpt, 50Pos, 2Row, 1Mm, Th; Available Until Stocks Are Exhausted Alternative Available |3M 99950-S000 RoHS : Not Compliant |
| 800 | ||
| B59950C0130A070 | TDK Corporation | Ptc Thermistor, 4R9, 80V, Through Hole; |Tdk B59950C0130A070 RoHS : Compliant |
| 542 | ||
| B59950C0130A070 | TDK Corporation | Ptc Thermistor, 4R9, 80V, Through Hole; |Tdk B59950C0130A070 RoHS : Compliant |
| 542 | ||
| 9950 060500 | Belden Inc | Multiconductor Cable, Shielded; |Belden 9950 060500 RoHS : Compliant |
| 500 | ||
| CGPT-19/9.5-0-STK | TE Connectivity | Heat-Shrink Tubing, 2:1, Blk, 19Mm; |Te Connectivity Raychem CGPT-19/9.5-0-STK RoHS : Compliant |
| 242 | ||
09140009950![]() | HARTING Technology Group | Conn Accessory, Blank Mod, Han Mod; |Harting 09140009950 RoHS : Compliant |
| 241 | ||
| 2439950000 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Header, 6Pos, Th; |Weidmuller 2439950000 RoHS : Compliant |
| 79 | ||
| 9995040000 | Weidmüller Interface GmbH & Co. KG | Tb, Wire To Brd, 11Pos, 14Awg; |Weidmuller 9995040000 RoHS : Compliant |
| 43 | ||
| COV37099502 | LG Corporation | Bracket Assembly, outsourcing; |Lg COV37099502 RoHS : Not Compliant |
| 7 | ||
| COV37099501 | LG Corporation | Bracket Assembly, outsourcing; |Lg COV37099501 RoHS : Not Compliant |
| 6 | ||
| 9950 | Pro Elec | Travel Adapter, 5A, 250V, White; |Pro Elec 9950 RoHS : Compliant |
| 0 | ||
![]() RS | 09930009950 | HARTING Technology Group | HAN S FIXING SCREWS M3X6 ISO 7380-2 RoHS : Compliant |
| 800 | |
09140009950![]() | HARTING Technology Group | CONNECTOR POWER HEAVY DUTY SPACER MODULE, HAN-MODULAR SERIES RoHS : Compliant |
| 660 | ||
| 10399500 | Lapp Group | MCB 0 BLIND FEMALE MODULE RoHS : Compliant |
| 194 | ||
| 4995-0 (1632889) | Pomona Electronics | BINDING POST SPRING-LOADED BINDING POST 15 A 1200 V (RMS) (MAX.) NYLON HEX |
| 55 | ||
| MBCC-530 (29950) | Banner Engineering Corp | SINGLE ENDED CORDSET, 7/8 INCH FEMALE TO PIGTAIL, 9 M, PVC, MBCC SERIES |
| 24 | ||
| 199DBX-3 (P995003E) | Schneider Electric | RELAY, E-MECH, POWER, SPST-NO-DM, 40A, CTRL-V 24DC, VOL-RTG 277/28AC/DC, SCREW |
| 12 | ||
| 8399507 | RS Pro | BRASS COMPRESSION GLAND FOR THERMOCOUPLE 0.24IN PROBE 1/8 BSPP IN-LINE CONNECTOR |
| 9 | ||
| 1019950 (TMC 72B 63A) | Phoenix Contact | CIRCUIT BREAKER THERMAL-MAGNETIC 2 POLE 63A B CURVE UL1077 TMC 7 SERIES |
| 4 | ||
| 99502H (PER.99502H-2RLDF2) | PEER Bearing Company | DEEP GROOVE BALL BEARING, ID 5/8IN, OD 1-3/8IN, STEEL |
| 3 | ||
| 99500 | Brady Worldwide Inc | PADLOCKS, STEEL, RED, FOR LOCKOUT DEVICE, HEAVY-DUTY, LOCKOUT SERIES |
| 2 | ||
| 09060009950 (7412790) | HARTING Technology Group | 09 06 SERIES CODE PIN FOR USE WITH DIN 41612 CONNECTOR |
| 2 | ||
| 3209950 (PP-H 2 5/10) | Phoenix Contact | TERMINAL BLOCK CONNECTOR PLUG COMBI PP-H - 2 5/10 |
| 2 | ||
| 2299505 (FLK 34/EZ-DR/ 200/KONFEK) | Phoenix Contact | ROUND CABLE 2-34POS SOCKET 2M |
| 2 | ||
| 117995-0001 | Dynapar | CABLE, 6FT DIAGNOSTIC AND PROGRAMMING CABLE TO PC. 6 PIN MS TO USB |
| 1 | ||
| 99502H-C3 (PER.99502H-2RLDC3) | PEER Bearing Company | RADIAL BALL BEARING, ID 5/8IN, OD 1-3/8 IN, W 7/16 IN, STEEL |
| 1 | ||
![]() Microchip Technology Inc | MCP1799-5002H/DB | Microchip Technology Inc | 80 mA High Voltage, Low Quiescent Current LDO Reg, 5.0V, SOT-223, Projected EOL: 2046-09-10 RoHS : Compliant |
| 23 | |
| MCP1799-5002H/DBVAO | Microchip Technology Inc | 80 mA High Voltage, Low Quiescent Current LDO Reg, 5.0V, SOT-223, Projected EOL: 2051-01-10 RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 9950-2305-23 | TE Connectivity | 9950 2305 23 RoHS : Compliant |
| 830 | |
| 9950 | ebm-papst | AC Fan Axial Sintec Bearing 230V 68.9CFM 37dB 119 X 119 X 25.4mm RoHS : Compliant |
| 28 | ||
| 35-9950 | Ideal Industries Inc | Insulated Hand Tools Kit RoHS : Compliant |
| 2 | ||
| 73650-9950 | Molex | RoHS : Compliant |
| 0 | ||
| 9950-0601000 | Belden Inc | Cable; 50 cond; 22 AWG; Strand (7X30); Foil+braid shielded; Chrome jkt; 1000 ft. RoHS : Compliant |
| 0 | ||
| 9950-060500 | Belden Inc | Cable; 50 cond; 22 AWG; Strand (7X30); Foil+braid shielded; Chrome jkt; 500 ft. RoHS : Compliant |
| 0 | ||
| 9950-060100 | Belden Inc | Cable; 50 cond; 22 AWG; Strand (7X30); Foil+braid shielded; Chrome jkt; 100 ft. RoHS : Compliant |
| 0 | ||
| 9950-2200-23 | TE Connectivity | Cable Assembly Coaxial 0.2m 30AWG OSMT 1 POS F RoHS : Compliant |
| 0 | ||
| 999-9950-270W | Middle Atlantic Products | RoHS : Compliant |
| 0 | ||
| 9950-1125-23 | TE Connectivity | 9950 1125 23 RoHS : Compliant |
| 0 | ||
| 9950-1050-23 | TE Connectivity | 9950 1050 23 RoHS : Compliant |
| 0 | ||
| 999-9950-200W | Middle Atlantic Products | RoHS : Compliant |
| 0 | ||
| 999-9950-000B | Middle Atlantic Products | RoHS : Compliant |
| 0 | ||
| 999-9950-270B | Middle Atlantic Products | RoHS : Compliant |
| 0 | ||
| 999-9950-000W | Middle Atlantic Products | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | S99-50571 | Infineon Technologies AG | NOR Flash Nor, Memory & Data Storage RoHS : Not Compliant | 823 | ||
| S99-50459 | Infineon Technologies AG | FLASH - NOR (SLC) 8-SON Tray RoHS : Compliant |
| 4,835 | ||
| S99-50299 | Infineon Technologies AG | Flash Memories RoHS : Compliant | 39,828 | |||
| S99-50550 | Infineon Technologies AG | FLASH - NOR (SLC) 8-SON Tray RoHS : Compliant |
| 4,643 | ||
| S99-50365P | Infineon Technologies AG | FLASH - NOR (SLC) 48-BGA Tray RoHS : Compliant | 29,607 | |||
| S99-50400 | Infineon Technologies AG | FLASH - NOR (SLC) 1Gbit 128M x 8 2.7V - 3.6V SPI - Quad I/O 133MHz 6.5ns 16-SOIC Tray RoHS : Compliant |
| 11,764 | ||
| S99-50572 | Infineon Technologies AG | FLASH - NOR (SLC) 64-BGA Tray RoHS : Compliant |
| 1,223 | ||
| S99-50272 | Infineon Technologies AG | IC MEMORY 56-SOP Tray RoHS : Compliant |
| 119 | ||
UCC29950D![]() | Texas Instruments | Power Factor Correction Continuous Conduction (CCM) 18V 16-SOIC Tube RoHS : Compliant |
| 4,958 | ||
CY2V9950AC![]() | Cypress Semiconductor | Clock Generators and Synthesizers Zero Delay Buffer 200MHz 32-QFP RoHS : Not Compliant |
| 8,000 | ||
| S99-50459 | Cypress Semiconductor | FLASH - NOR (SLC) 8-SON Tray RoHS : Compliant |
| 354 | ||
| S99-50540 | Cypress Semiconductor | FLASH - NOR (SLC) 48-SOP Tray RoHS : Not Compliant |
| 8,730 | ||
| S99-50569 | Cypress Semiconductor | FLASH - NOR (SLC) 48-SOP Tray RoHS : Not Compliant |
| 7,389 | ||
| S99-50572 | Cypress Semiconductor | FLASH - NOR (SLC) 64-BGA Tray RoHS : Compliant |
| 355 | ||
5962R9950402VDA![]() | National Semiconductor Corporation | Operational Amplifier, 4 Func, 4000uV Offset-Max, BIPolar, CDSO14 RoHS : Not Compliant |
| 1 | ||
![]() Sager | AP6-1RC-5995-008 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | |
| AP6-1RC-5995-007 | Sensata Circuit Breakers | Circuit Breakers CIRCUIT BREAKER |
| 0 | ||
| 0399500103 | Molex | Fixed Terminal Blocks 8MM EURO 03P VT FIXED HI VOLT | 0 | |||
0399500104![]() | Molex | Fixed Terminal Blocks 8MM EURO 04P VT FIXED HI VOLT RoHS : Compliant | 0 | |||
| TW-04-12-G-S-995-050 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-34-12-G-D-995-065 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-16-12-T-D-995-060 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 049995-000 | TE Connectivity | TE Connectivity TXR75AB00-1606BI |
| 0 | ||
| 0740995001 | Molex | Headers & Wire Housings SL SMT VT Shrd Hdr Tin 19Ckt (Void17) |
| 0 | ||
| 0469950003 | Molex | Headers & Wire Housings KK 156 DUAL WAFER FLK HDR 4CKT TIN |
| 0 | ||
| 1995017 | Phoenix Contact | Pluggable Terminal Blocks GMVSTBW 2.5/ 3-STF-7,62-BK RoHS : Compliant |
| 0 | ||
| TW-20-12-G-D-995-001 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 0622029950 | Molex | Extraction, Removal & Insertion Tools REMOVAL TOOL 2 X 6 | 0 | |||
| 1SNA299501R0300 | TE Connectivity | DIN Rail Terminal Blocks DS2.5/8.ADO RoHS : Compliant |
| 0 | ||
| 110-99-950-61-001000 | Mill-Max Mfg Corp | IC & Component Sockets DIP Dual In Line Socket | 0 | |||
![]() TME | 89950-015LF | Amphenol Corporation | Connector: IDC; female; Minitek; feed-through; gold-plated |
| 4,480 | |
| 2099950 | Bossard Group | Screw; with flange; 4.2x13; Head: button; Pozidriv; PZ2; steel; zinc |
| 2,605 | ||
| 314851079950001 | Honeywell Sensing and Control | 314851079950001 |
| 26 | ||
| 1389950000 | Weidmüller Interface GmbH & Co. KG | Patch cord; Cat 5e; both sides; 20m; IP67 |
| 3 | ||
| 413 995 04 | felo | Tools set: for assembly work; belt pouch; 1kV; 10pcs. |
| 2 | ||
| 00499504 | GSR | Guide; plastic; diestock; Ø45x14mm |
| 0 | ||
| 1299/50C SL001 | Alpha Wire | Wire; Alpha Essential C&C; 50x22AWG; shielded,Al-PET foil; PVC |
| 0 | ||
| 2099500 | Bossard Group | Screw; M5; M5x16; 0.8; Head: countersunk; Pozidriv; PZ2; steel; zinc |
| 0 | ||
| 8019950000 | Weidmüller Interface GmbH & Co. KG | 8019950000 RoHS : Compliant |
| 0 | ||
| 00499505 | GSR | Guide; plastic; diestock; Ø55x22mm |
| 0 | ||
| 1299/50C SL002 | Alpha Wire | Wire; Alpha Essential C&C; 50x22AWG; shielded,Al-PET foil; PVC |
| 0 | ||
| 00499503 | GSR | Guide; plastic; diestock; Ø45x18mm |
| 0 | ||
| 1029950000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 17.5A RoHS : Compliant |
| 0 | ||
| 1939950 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
| 2049950300 | Weidmüller Interface GmbH & Co. KG | Connector: M12; plug; PIN: 3; female; industrial; SAIL; 600V; IP67; S |
| 0 | ||
![]() Ameya Holding Limited | BD99950MUV-E2 | ROHM Semiconductor | 带SMBus接口2节/3节电池适用NDVC充电器 RoHS : Compliant |
| 5,250 | |
![]() ComSIT USA | 50037995001 | TEXCHE | AVAILABLE EU | 300 | ||
![]() ComSIT USA | S9950122EZLF | Spansion | Memory Chip RoHS : Not Compliant | 3,028 | ||
| A995012 | Excelitas Technologies Corporation | Photocell Light-Dependent Resistor, 150V RoHS : Compliant | 1,000 | |||
| B59950C80A70Z15 | TDK Electronics | PTC THERMISTOR FOR OVERCURRENT PROTECTION PTC Thermistor, 3.7ohm, Through Hole Mount RoHS : Compliant | 500 | |||
| A99501 | Excelitas Technologies Corporation | Photodiode, high-speed, SMD, for optical sensing, detection, and light measurement applications RoHS : Not Compliant | 500 | |||
| A995009 | Excelitas Technologies Corporation | Electronic Component RoHS : Not Compliant | 200 | |||
CY7B9950AXC![]() | Cypress Semiconductor | 2.5/3.3V, 200-MEGA HZ HIGH-SPEED MULTI-PHASE PLL CLOCK BUFFER PLL Based Clock Driver, 7B Series, 8 True Output(s), 0 Inverted Output(s), PQFP32 RoHS : Compliant | 30 | |||
![]() Interstate Connecting Components | M85049/9-50W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Env |
| 9 | |
| 094995-000 | TE Connectivity | MWJS-50/16-A/U-C(100) | 0 | |||
| 049995-000 | TE Connectivity | TXR75AB00-1606BI | 0 | |||
| CGPT-19/9.5-0-STK | TE Connectivity | CGPT-19/9.5-0-STK RoHS : Compliant | 0 | |||
| M85049/9-50W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| 995-0002-281 | ITT Interconnect Solutions | 995-0002-281 | 0 | |||
| 995-0002-317 | ITT Interconnect Solutions | 995-0002-317 | 0 | |||
| 995-0002-362 | ITT Interconnect Solutions | 995-0002-362 | 0 | |||
| 995-0002-399 | ITT Interconnect Solutions | 995-0002-399 | 0 | |||
| 995-0002-443 | ITT Interconnect Solutions | 995-0002-443 | 0 | |||
| 995-0002-524 | ITT Interconnect Solutions | 995-0002-524 | 0 | |||
| 995-0002-605 | ITT Interconnect Solutions | 995-0002-605 | 0 | |||
| 995-0002-650 | ITT Interconnect Solutions | 995-0002-650 | 0 | |||
| 995-0002-687 | ITT Interconnect Solutions | 995-0002-687 | 0 | |||
| 995-0002-731 | ITT Interconnect Solutions | 995-0002-731 | 0 | |||
![]() PEI Genesis | RFE23050499-501 | SOURIAU-SUNBANK |
| 7 | ||
| M85049/9-50W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/9-50W | Amphenol PCD |
| 0 | |||
| 995-0001-192 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-281 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-317 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-362 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-399 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-443 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-524 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-605 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-650 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-687 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-731 | ITT Interconnect Solutions |
| 0 | |||
| 995-0002-768 | ITT Interconnect Solutions |
| 0 | |||
![]() PUI | 12.99503 | 33,800 | ||||
| 12.99502 | 13,018 | |||||
| 12.99504 | 1,294 | |||||
| 12.99507 | 1,070 | |||||
| 12.99505 | 328 | |||||
![]() Chip 1 Exchange | 12.99503 | Geyer Electronic E K | INSTOCK | 33,800 | ||
| 12.99502 | Geyer Electronic E K | INSTOCK | 13,018 | |||
| 09 14 000 9950 | HARTING Technology Group | INSTOCK | 3,984 | |||
| B59950C120A70 | TDK Electronics | INSTOCK | 2,325 | |||
| M20-9950345 | INSTOCK | 2,176 | ||||
| 12.99504 | Geyer Electronic E K | INSTOCK | 1,294 | |||
| 12.99507 | Geyer Electronic E K | INSTOCK | 1,070 | |||
| 929950-00 | INSTOCK | 477 | ||||
| FCP6160141T3200A99-50 | INSTOCK | 357 | ||||
| 12.99505 | Geyer Electronic E K | INSTOCK | 328 | |||
| AB099500006 | INSTOCK | 300 | ||||
| 07199-50 | Qualtek Electronics Corporation | INSTOCK RoHS : Compliant | 100 | |||
| 995001- | Wurth Elektronik | INSTOCK | 50 | |||
| 1AB11995005 | INSTOCK | 30 | ||||
![]() Avnet Abacus | 89950-015LF | Amphenol Corporation | (Alt: 89950-015LF) RoHS : Compliant | 4,480 | ||
| 9950 | ebm-papst | AC Axial Fan 230 V Square 119 mm 25 mm Sleeve Bearing 689 CFM (Alt: 9282708012) RoHS : Compliant | 0 | |||
| 1995033 | Phoenix Contact | PC 4 9ST762 13579 PC49ST76213579 (Alt: 1995033) RoHS : Compliant | 0 | |||
| 399500106 | Molex | Conn Eurostyle Block 6 POS 16mm Solder ST ThruHole 20AContact (Alt: 399500106) RoHS : Compliant | 0 | |||
| 399500106 | Molex | Conn Eurostyle Block 6 POS 16mm Solder ST ThruHole 20AContact (Alt: 399500106) RoHS : Compliant | 0 | |||
| 399500110 | Molex | Conn Eurostyle Block 10 POS 16mm Solder ST ThruHole 20AContact (Alt: 399500110) RoHS : Compliant | 0 | |||
| 2512799505 | nVent Schroff | (Alt: 2512799505) RoHS : Compliant | 0 | |||
| 9995040000 | Weidmüller Interface GmbH & Co. KG | (Alt: 9995040000) RoHS : Compliant | 0 | |||
| 254995-000 | TE Connectivity | (Alt: 254995-000) RoHS : Not Compliant | 0 | |||
| 1-1625995-0 | TE Connectivity | Res Wirewound 1K Ohm 5 75W 30ppmC Aluminum Housed AXL Flange Mount (Alt: 1-1625995-0) RoHS : Compliant | 0 | |||
| M20-9950246 | Harwin | 254mm 01 Pitch DIL Horizontal PC Tail Pin Header 61mm mating pin height tin 22 contacts (Alt: M20-9950246) RoHS : Compliant | 0 | |||
| MAL215099501E3 | Vishay Intertechnologies | SMD Aluminium Electrolytic Capacitor Radial Can SMD 470 uF 16 V 3000 hours 105C Polar - Tape and Reel (Alt: MAL215099501E3) RoHS : Compliant | 0 | |||
| MAL226099504E3 | Vishay Intertechnologies | SMD 1500uF 16V 18x18x16 150C - Tape and Reel (Alt: MAL226099504E3) RoHS : Compliant | 0 | |||
| 1SNA299501R0300 | TE Connectivity | (Alt: 1SNA299501R0300) RoHS : Compliant | 0 | |||
| 10169995-040000LF | Amphenol Corporation | - Tape and Reel (Alt: 10169995-040000LF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 8-99-500302 | Amphenol Corporation | POWER BUSBAR 6P SLD (Alt: 8-99-500302) RoHS : Compliant | 500 | ||
| 8-99-500919 | Amphenol Corporation | GEC,BUSBAR 440A POS (Alt: 8-99-500919) RoHS : Compliant | 0 | |||
| 8-99-500920 | Amphenol Corporation | GEC,BUSHING (Alt: 8-99-500920) RoHS : Compliant | 0 | |||
| 8-99-500234 | Amphenol Corporation | NCP3,M6 NUT (BOTTOM PCB) (Alt: 8-99-500234) RoHS : Compliant | 0 | |||
| 8-99-500973 | Amphenol Corporation | (Alt: 8-99-500973) RoHS : Compliant | 0 | |||
| 8-99-500193 | Amphenol Corporation | J2C+ BUSBAR (Alt: 8-99-500193) RoHS : Compliant | 0 | |||
| 8-99-500517 | Amphenol Corporation | (Alt: 8-99-500517) RoHS : Compliant | 0 | |||
| 8-99-500805 | Amphenol Corporation | GEC,BUSBAR 12V (Alt: 8-99-500805) RoHS : Compliant | 0 | |||
| 8-99-500483 | Amphenol Corporation | NCF2(SINGLE BOARD),BUSHING (Alt: 8-99-500483) RoHS : Compliant | 0 | |||
| 8-99-500807 | Amphenol Corporation | GEC,BUSBAR STUD (Alt: 8-99-500807) RoHS : Compliant | 0 | |||
| 8-99-500232 | Amphenol Corporation | NCP3,BOTTOM PCB STUD (Alt: 8-99-500232) RoHS : Compliant | 0 | |||
| 8-99-500981 | Amphenol Corporation | (Alt: 8-99-500981) RoHS : Compliant | 0 | |||
| 8-99-500237 | Amphenol Corporation | NCP3,WASHER-X (TOP PCB) (Alt: 8-99-500237) RoHS : Compliant | 0 | |||
| 8-99-500245 | Amphenol Corporation | BUSBAR WASHER WITH NUT (Alt: 8-99-500245) RoHS : Compliant | 0 | |||
| 8-99-500782 | Amphenol Corporation | POWER BUSBAR 6P SLD ESC 130A (Alt: 8-99-500782) RoHS : Compliant | 0 | |||
![]() Avnet Silica | L9950TR | STMicroelectronics | Door Actuator Driver 36Pin PowerSO TR (Alt: L9950TR) RoHS : Compliant | 0 | ||
L9950XPTR![]() | STMicroelectronics | Door Actuator Driver 36Pin PowerSO TR (Alt: L9950XPTR) RoHS : Compliant | 0 | |||
| TDA9950TT/C3,512 | NXP Semiconductors | I2CBus Repeater 1 Input 3 V to 36 V 20 Pins TSSOP (Alt: TDA9950TT/C3,512) RoHS : Compliant | 0 | |||
| MCP1799-5002H/DB | Microchip Technology Inc | (Alt: MCP1799-5002H/DB) RoHS : Compliant | 0 | |||
| S4509950P0827 (ALS) | Sanmina Corporation | (Alt: S4509950P0827) RoHS : Not Compliant | 0 | |||
![]() Component Electronics, Inc | 929950-00 | 3M | IN STOCK SHIP TODAY |
| 1,077 | |
| 9129950000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 123 | ||
| 499-5010-004 | Teradyne Inc | IN STOCK SHIP TODAY | 28 | |||
| 2499-5001-54 | MACOM | IN STOCK SHIP TODAY |
| 2 | ||
| 995-0002-219 | ITT Interconnect Solutions | IN STOCK SHIP TODAY |
| 2 | ||
| 5995-01-347-3318 | IN STOCK SHIP TODAY | 1 | ||||
![]() EBV Elektronik | S99-50571 | Infineon Technologies AG | TSOP I 48INDUSNOR (Alt: SP005668859) RoHS : Compliant | 0 | ||
| ACPL-C799-500E | Broadcom Limited | Optically Isolated SigmaDelta IQ Modulator 9 MHz to 11 MHz 8 Pins SSO (Alt: ACPL-C799-500E) RoHS : Compliant | 0 | |||
| TDA9950TT/C3,512 | NXP Semiconductors | I2CBus Repeater 1 Input 3 V to 36 V 20 Pins TSSOP (Alt: TDA9950TT/C3,512) RoHS : Compliant | 0 | |||
| MCP1799-5002H/DB | Microchip Technology Inc | (Alt: MCP1799-5002H/DB) RoHS : Compliant | 0 | |||
| C19950_HEKLA-SOCKET-RZ-LENS | LEDIL | LED (Alt: C19950_HEKLA-SOCKET-RZ-LENS) RoHS : Compliant | 0 | |||
| C19950_HEKLA-RZ-SOCKET-LENS | LEDIL | LED Lighting Accessories (Alt: C19950_HEKLA-RZ-SOCKET-LENS) RoHS : Compliant | 0 | |||
![]() Flip Electronics | S99-50300 | Infineon Technologies AG | Stock | 10,832 | ||
| S99-50272 | Infineon Technologies AG | Stock | 6,757 | |||
| S99-50299 | Infineon Technologies AG | Stock | 6,514 | |||
| S99-50239 | Infineon Technologies AG | Stock | 6,300 | |||
| S99-50196 | Infineon Technologies AG | Stock | 5,400 | |||
| S99-50338 | Infineon Technologies AG | Stock | 4,040 | |||
| S99-50546 | Stock | 3,192 | ||||
| S99-50243P | Infineon Technologies AG | Stock | 1,920 | |||
| S99-50424 | Infineon Technologies AG | Stock | 1,541 | |||
| S99-50471 | Infineon Technologies AG | Stock | 910 | |||
| S99-50346 | Infineon Technologies AG | Stock | 600 | |||
| S99-50276 | Infineon Technologies AG | Stock, Ship Today |
| 563 | ||
| S99-50350 | Infineon Technologies AG | Stock, Ship Today |
| 240 | ||
![]() Master Electronics | LELK111-39950-10-V | Sensata Circuit Breakers | CB 3 POLE 10A 240V AC 50/60HZ 63 DELAY RoHS : Compliant |
| 17 | |
| 1.697.3299.50 | Sealcon USA | Nickel Plated Brass Multi-Hole Strain Relief Fitting M32 x 1.5 RoHS : Compliant |
| 15 | ||
| 9950 | ebm-papst | AC Fan Axial Sintec Bearing 230V 68.9CFM 37dB 119 X 119 X 25.4mm RoHS : Compliant |
| 0 | ||
| AP6-1RC-5995-008 | Sensata Circuit Breakers | This series is no longer combinable with Airpax RoHS : Not Compliant |
| 0 | ||
| 000479950 | ITT Interconnect Solutions | Backshell includes wire sealing grommet and compression ring RoHS : Not Compliant |
| 0 | ||
| HW-15-14-S-S-995-055 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| AP6-1RC-5995-007 | Sensata Circuit Breakers | Circuit Breaker HydMag 1 pl 50VDC/250VAC 10A aux sw sealed | Sensata - Airpax AP6-1RC-5995-007 RoHS : Not Compliant |
| 0 | ||
| 259950048 | OMRON Industrial Automation | SCA-35-4 RoHS : Compliant |
| 0 | ||
| 029950103 | TE Connectivity | ABB-CONNECTION - ADO SERIES IDC TERMINAL BLOCKS RoHS : Compliant |
| 0 | ||
| TW-04-12-G-S-995-050 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-34-12-G-D-995-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-10-D-29.95-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-16-12-T-D-995-060 | Samtec Inc | Conn Board Stacker HDR 32 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 172699-5036 | Molex | Connector Right Guide - 6 Columns - 102 Circuits - PTH 0.36mm. RoHS : Compliant |
| 0 | ||
| 049995-000 | TE Connectivity | TXR75AB00-1606BI MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE39599-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 19.68 inches. 75 Ohm BNC Male to Unterminated Lead Cable Using 75 Ohm RG187 Coax in 50 CM., Radio frequency assembly 75 Ohm BNC male to unterminated lead cable using 75 Ohm RG187 coax in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to unterminated lead cable using 75 Ohm RG187 coax in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This BNC to straight cut lead cable is a male to sexless coax assembly, PE39599-50CM, can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. BNC plug to straight cut lead sexless cable assembly PE39599-50CM is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency BNC male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39599-50CM can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to unterminated lead cable using 75 Ohm RG187 coax in 50 CM. |
| 104 | |
| PE3C6499-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Outdoor Rated 4.3-10 Male to N Female Low PIM Cable 50 Cm Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 male to N female low PIM cable 50 cm length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 male to N female low PIM cable 50 cm length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-375-4310M-LP 4.3-10 to TC-SPP375-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-375-4310M-LP 4.3-10 cable connection on one end and TC-SPP375-NF-LP N type cable connection on the other. Our low PIM TC-375-4310M-LP 4.3-10 to TC-SPP375-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-375-4310M-LP 4.3-10 to TC-SPP375-NF-LP N type cable is a male to female coax assembly, PE3C6499-50CM, can also be known as a low PIM TC-375-4310M-LP 4.3-10 plug to TC-SPP375-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-375-4310M-LP 4.3-10 plug to TC-SPP375-NF-LP type N jack cable assembly PE3C6499-50CM is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-375-4310M-LP 4.3-10 cable assembly is manufactured with TC-375-4310M-LP 4.3-10 to TC-SPP375-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-375-4310M-LP 4.3-10 male to TC-SPP375-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6499-50CM can also be used in the other direction and will be TC-SPP375-NF-LP type N female to TC-375-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-375-4310M-LP 4.3-10 plug to TC-SPP375-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-375-4310M-LP 4.3-10 to TC-SPP375-NF-LP N type cable assembly for quick shipment worldwide. Variations of TC-375-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 male to N female low PIM cable 50 cm length using SPO-375 coax using Times Microwave parts. |
| 86 | ||
| PE3C8499-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-375, RF Cable Type: SPF-375, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Fire Rated 7/16 DIN Female to N Female Low PIM Cable 50 CM Length Using SPF-375 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN female to N female low PIM cable 50 cm length using SPF-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN female to N female low PIM cable 50 cm length using SPF-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a female gender on end 1 and female on end 2. This 7/16 DIN to N type cable is a female to female coax assembly, PE3C8499-50CM, can also be known as a low PIM 7/16 DIN jack to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN jack to type N jack cable assembly PE3C8499-50CM is built with SPF-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN female to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8499-50CM can also be used in the other direction and will be type N female to 7/16 DIN female cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN female to N female low PIM cable 50 cm length using SPF-375 coax using Times Microwave parts. |
| 50 | ||
| PE3W09999-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. N Male to N Male Low PIM Cable 50 cm Length Using SPP-375-LLPL Coax., Radio frequency assembly N male to N male low PIM cable 50 cm length using SPP-375-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male low PIM cable 50 cm length using SPP-375-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3W09999-50CM, can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W09999-50CM is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low PIM cable 50 cm length using SPP-375-LLPL coax. |
| 37 | ||
| PE3W00099-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. MCX Jack to MCX Jack Cable 50 cm Length Using RG178 Coax., Radio frequency assembly MCX jack to MCX jack cable 50 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX jack to MCX jack cable 50 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and MCX cable connection on the other. Our MCX to MCX cable assemblies have a jack gender on end 1 and jack on end 2. This MCX to MCX cable is a jack to jack coax assembly, PE3W00099-50CM, can also be known as a MCX female to MCX female cable assembly and will be shipped same-day as it is purchased. MCX female to MCX female cable assembly PE3W00099-50CM is built with RG178 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MCX jack to MCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MCX female to MCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX jack to MCX jack cable 50 cm length using RG178 coax. |
| 35 | ||
| PE3C6199-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum 7/16 DIN Male Right Angle to N Male Right Angle Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male right angle to N male right angle low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male right angle to N male right angle low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connection on one end and right angle TC-SPP250-NM-RA-LP type N cable connection on the other. Our low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN to right angle TC-SPP250-NM-RA-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-NM-RA-LP type N cable is a male to male coax assembly, PE3C6199-50CM, can also be known as a low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN plug to right angle TC-SPP250-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-NM-RA-LP N type plug cable assembly PE3C6199-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-RA-LP 7/16 DIN cable assembly is manufactured with right angle TC-SPP250-716M-RA-LP 7/16 DIN to right angle TC-SPP250-NM-RA-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle male to TC-SPP250-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6199-50CM can also be used in the other direction and will be right angle TC-SPP250-NM-RA-LP N type male to right angle TC-SPP250-716M-RA-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle plug to TC-SPP250-NM-RA-LP N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-RA-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male right angle to N male right angle low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 10 | ||
| PE3C9950-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMPS Female to SMPS Female Cable 6 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to SMPS female cable 6 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable 6 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to SMPS cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and SMPS cable connection on the other. Our SMPS to SMPS cable assembly has female gender on end 1 and female on end 2. PE3C9950-6 can also be known as a SMPS jack to SMPS jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to SMPS jack cable assembly PE3C9950-6 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS female to SMPS female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMPS jack to SMPS jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to SMPS female cable 6 inch length using PE-P047HF coax. |
| 0 | ||
| PE3W19950 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Female to D-Sub Plug Right Angle Cable Using PE-SR405FL Coax. PE3W19950 is a SMA female to D-Sub plug right angle cable using PE-SR405FL coax. This Pasternack SMA female to D-Sub plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm D-Sub for connector 2. SMA to D-Sub right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to plug D-Sub right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W19950 SMA female to D-Sub plug right angle cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3C9950 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. SMPS Female to SMPS Female Cable Using PE-P047HF Coax., Radio frequency assembly SMPS female to SMPS female cable using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to SMPS cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and SMPS cable connection on the other. Our SMPS to SMPS cable assembly has female gender on end 1 and female on end 2. PE3C9950 can also be known as a SMPS jack to SMPS jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to SMPS jack cable assembly PE3C9950 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS female to SMPS female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMPS jack to SMPS jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to SMPS female cable using PE-P047HF coax. | 0 | |||
| PE3C9950-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPS Female to SMPS Female Cable 18 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to SMPS female cable 18 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable 18 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to SMPS cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and SMPS cable connection on the other. Our SMPS to SMPS cable assembly has female gender on end 1 and female on end 2. PE3C9950-18 can also be known as a SMPS jack to SMPS jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to SMPS jack cable assembly PE3C9950-18 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS female to SMPS female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMPS jack to SMPS jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to SMPS female cable 18 inch length using PE-P047HF coax. |
| 0 | ||
| PE3W09950/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. BNC Male to UHF Male Cable Using RG8 Coax with HeatShrink. PE3W09950/HS is a BNC male to UHF male cable using RG8 coax. This Pasternack BNC male to UHF male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm UHF for connector 2. Our male BNC to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09950/HS BNC male to UHF male cable assembly is constructed with RG8 coax. | 0 | |||
| PE3W09950 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. UHF Male to BNC Male Cable Using RG8 Coax. PE3W09950 is a UHF male to BNC male cable using RG8 coax. This Pasternack UHF male to BNC male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. Our male UHF to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09950 UHF male to BNC male cable assembly is constructed with RG8 coax. | 0 | |||
| PE3C7999-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. N Male to N Male Right Angle Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C7999-50CM can also be known as a low PIM type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7999-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7999-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7999-50CM can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE39950 | Pasternack Enterprises | 0 | ||||
| PE3C9950-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPS Female to SMPS Female Cable 12 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to SMPS female cable 12 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable 12 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to SMPS cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and SMPS cable connection on the other. Our SMPS to SMPS cable assembly has female gender on end 1 and female on end 2. PE3C9950-12 can also be known as a SMPS jack to SMPS jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to SMPS jack cable assembly PE3C9950-12 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS female to SMPS female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMPS jack to SMPS jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to SMPS female cable 12 inch length using PE-P047HF coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-8995001MFA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR RoHS : Not Compliant | 0 | ||
| 5962-8995001B2A | Teledyne HiRel | FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR RoHS : Not Compliant | 0 | |||
| 5962-8995001BFA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR RoHS : Not Compliant | 0 | |||
| 5962-8995001BEA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR RoHS : Not Compliant | 0 | |||
| 5962-8995001MEA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR RoHS : Not Compliant | 0 | |||
| 5962-8995001M2A | Teledyne HiRel | FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR RoHS : Not Compliant | 0 | |||
![]() Vyrian | 256-509/332-009/999-950 | WAGO Innovative Connections | Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 15,093 | ||
| 236-402/000-009/999-950 | WAGO Innovative Connections | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 14,190 | |||
| 236-503/000-009/999-950 | WAGO Innovative Connections | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 14,081 | |||
| 1995017 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,176 | |||
| 256-402/000-009/999-950 | WAGO Innovative Connections | Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,908 | |||
5962R9950402VZA![]() | Texas Instruments | Operational Amplifier, 4 Func, 2000uV Offset-Max, BIPolar, CDSO14 RoHS : Not Compliant | 9,832 | |||
5962R9950402VCX![]() | Texas Instruments | Operational Amplifier, 4 Func, 4000uV Offset-Max, BIPolar, CDIP14 | 9,366 | |||
5962R9950401VDX![]() | Texas Instruments | Operational Amplifier, 4 Func, 7000uV Offset-Max, BIPolar, CDFP14 | 7,276 | |||
5962R9950402VDA![]() | National Semiconductor Corporation | Operational Amplifier, 4 Func, 2000uV Offset-Max, BIPolar, CDSO14 RoHS : Not Compliant | 6,953 | |||
| 1829950 | Phoenix Contact | Modular Terminal Block, 7A, 2 Row(s), 2 Deck(s) RoHS : Compliant | 6,393 | |||
5962-9950801V2A![]() | Texas Instruments | Bus Driver, LVT Series, 2-Func, 4-Bit, Inverted Output, BICMOS, CQCC20 RoHS : Not Compliant | 5,993 | |||
5962-9950801VRA![]() | Texas Instruments | Bus Driver, LVT Series, 2-Func, 4-Bit, Inverted Output, BICMOS, CDIP20 RoHS : Not Compliant | 4,941 | |||
| 5962-9950901QSX | Texas Instruments | Bus Driver, LVT Series, 1-Func, 8-Bit, True Output, BICMOS, CDFP20 | 4,710 | |||
5962R9950401VCX![]() | Texas Instruments | Operational Amplifier, 4 Func, 7000uV Offset-Max, BIPolar, CDIP14 | 3,803 | |||
| 0995050Z | Littelfuse Inc | Electric Fuse, 50A, 58VDC, 1000A (IR), Inline/holder | 1,101 | |||
![]() Win Source Electronics | BD99950MUV-E2 | ROHM Semiconductor | 2 CELL / 3 CELL NARROW VDC CHARG RoHS : Compliant |
| 12,516 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |