| Electronic Components Datasheet Search |
|
9932-12-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 85999-3255 | Molex | Dust Cover, 44915 Series, Black, RJ45, RJ45 8 Position Modular Jack Connector, -40 to 85 ?C - Bulk (Alt: 0859993255) RoHS : Compliant |
| 7,621 | |
| D38999/32W11R | Amphenol Corporation | - Bulk (Alt: D38999/32W11R) RoHS : Not Compliant | 86 | |||
| D38999/32W13R | Amphenol Corporation | - Bulk (Alt: D38999/32W13R) RoHS : Not Compliant | 81 | |||
| D38999/32W9N | Glenair Inc | - Bulk (Alt: D38999/32W9N) RoHS : Not Compliant |
| 57 | ||
| D38999/32Z9N | TE Connectivity | - Bulk (Alt: D38999/32Z9N) RoHS : Not Compliant |
| 20 | ||
| D38999/32F13N | TE Connectivity | - Bulk (Alt: D38999/32F13N) RoHS : Not Compliant |
| 5 | ||
| D38999/32H9R | Glenair Inc | - Bulk (Alt: D38999/32H9R) RoHS : Not Compliant |
| 4 | ||
| D38999/32F9N | TE Connectivity | - Bulk (Alt: D38999/32F9N) RoHS : Not Compliant |
| 1 | ||
| D38999/32M15N | Glenair Inc | - Bulk (Alt: D38999/32M15N) RoHS : Not Compliant | 1 | |||
| D38999/32W21R | Amphenol Corporation | - Bulk (Alt: 89AH4643) RoHS : Not Compliant |
| 0 | ||
| D38999/32W21R | TE Connectivity | - Bulk (Alt: D38999/32W21R) RoHS : Not Compliant | 0 | |||
| 993271-2 | TE Connectivity | - Bulk (Alt: 993271-2) RoHS : Not Compliant | 0 | |||
| JAND38999/32-K-11-C | Amphenol Corporation | - Bulk (Alt: D3899932K11C) RoHS : Not Compliant |
| 0 | ||
| JAND38999/32-K-25-R | Amphenol Corporation | DUST CAP;D38999/32 - PLUG CAP;PAIVATED - Bulk (Alt: D3899932K25R) RoHS : Not Compliant |
| 0 | ||
| JAND38999/32-W-19-C | Amphenol Corporation | - Bulk (Alt: D3899932W19C) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 21011009932 | HARTING Technology Group | Sensor Contact, Socket, 20Awg, Crimp; |Harting 21011009932 RoHS : Compliant |
| 276 | |
| D38999/32W9N | Amphenol PCD | Dust Cap W/Rope And Ring, Size 9; Access |Amphenol Pcd D38999/32W9N RoHS : Not Compliant |
| 144 | ||
| 209-993-23-38 | MARL International Limited | Small Indicator Bulb, T-5 1/2, Warm Wht; |Marl 209-993-23-38 RoHS : Compliant |
| 58 | ||
| D38999/32W23R | Amphenol PCD | D38999/32 - Plug Cap, Cad Rohs Compliant: No |Amphenol Pcd D38999/32W23R RoHS : Not Compliant |
| 36 | ||
| M85049/93-28 | Glenair Inc | Conn Clamp, 28, 44.5Mm, Thermoplastic; |Glenair M85049/93-28 RoHS : Compliant |
| 19 | ||
| D38999/32W15N | Glenair Inc | Protective Cap, Aluminum; |Glenair D38999/32W15N RoHS : Not Compliant |
| 18 | ||
| D38999/32-W-15-N | Amphenol Interconnect India Pvt Ltd | Protective Cap W/Rope & Ring, Sz 15/Alum; |Amphenol Interconnect India D38999/32-W-15-N RoHS : Not Compliant |
| 18 | ||
| D38999/32W11R | Amphenol PCD | Dust Cap W/ Rope, Plug, Size 11; Accesso |Amphenol Pcd D38999/32W11R RoHS : Not Compliant |
| 13 | ||
| D38999/32W19N | Amphenol PCD | Dust Cap W/ Rope, Plug, Size 19; Accessory Type:Dust Cap With Rope & Ring; For Use With:Mil-Dtl-38999 Series Iii Circular Plug Connectors; Connector Body Material:Aluminum Alloy Body; Product Range:- Rohs Compliant: No |Amphenol Pcd D38999/32W19N RoHS : Not Compliant |
| 13 | ||
| 19-932.2 | EAO AG | Lens, Round, Red; Lens Shape:Round; Switch Lens Colour:Red; Product Range:19 Series; For Use With:Eao 19 Series Pushbutton Switches; Lens Diameter:9Mm Rohs Compliant: Yes |Eao 19-932.2 RoHS : Compliant |
| 12 | ||
| 19-932.7 | EAO AG | Lens,7.3 Mm, Illuminative, Colourless,; |Eao 19-932.7 RoHS : Compliant |
| 5 | ||
| D38999/32W13N | Amphenol PCD | Dust Cap W/ Rope, Plug, Size 13; Accessory Type:Dust Cap With Rope & Ring; For Use With:Mil-Dtl-38999 Series Iii Circular Plug Connectors; Connector Body Material:Aluminum Alloy Body; Product Range:- Rohs Compliant: No |Amphenol Pcd D38999/32W13N RoHS : Not Compliant |
| 5 | ||
| M85049/93-20 | Glenair Inc | Conn Clamp, 20, 31.8Mm, Thermoplastic; |Glenair M85049/93-20 RoHS : Not Compliant |
| 4 | ||
| VC-9932 | BUD Industries Inc | Cabinet; |Bud Industries VC-9932 RoHS : Compliant |
| 2 | ||
| 61-9932.10 | EAO AG | Front Bezel, 22.5Mm Keylock Switch; For Use With:22.5Mm Keylock Switches; Product Range:61 Series Rohs Compliant: Yes |Eao 61-9932.10 RoHS : Compliant |
| 2 | ||
![]() Analog Devices Inc | MAX9932EUA+T | Analog Devices Inc | 2MHz to 1.6GHz 45dB RF-Detecti RoHS : Compliant | 2,500 | ||
| MAX9932EUA+ | Analog Devices Inc | 2MHz to 1.6GHz 45dB RF-Detecti RoHS : Compliant | 0 | |||
![]() RS | 322799 (2249932) | TE Connectivity | STRATO-THERM SERIES NICKEL PLATED CRIMP RING TERMINAL, M5 STUD SIZE,22 TO 16 AWG |
| 600 | |
| 39932 (KT 4/Ø6 GREY) | icotek Corporation | MULTI / SPECIAL CABLE GROMMETS, KT 4/06, GRAY |
| 492 | ||
| 21011009932 | HARTING Technology Group | M12 POWER FEM PWR/PE CONT. CRIMP 0,75MM2 RoHS : Compliant |
| 50 | ||
| 1899320 | Phoenix Contact | HEADER 5.08MM 12AWG 320V 12A 6 POSITION COMBICON CONTROL SERIES RoHS : Compliant |
| 48 | ||
| 19-932.2 | EAO AG | ACCESSORY, LENS, FLAT, PLASTIC, ROUND, 7.3MM, ILLUMINATIVE, TRANSPARENT, RED RoHS : Compliant |
| 44 | ||
| 110-99-324-41-001000 | Mill-Max Mfg Corp | CONN IC SOCKET DIP 24 OPEN 110 SERIES THRU-HOLE 0.3" 0.1" PIN SPCNG STRAIGHT 3A RoHS : Not Compliant |
| 35 | ||
| 110-99-328-41-001000 | Mill-Max Mfg Corp | CONN IC SOCKET DIP 28 OPEN 110 SERIES THRU-HOLE 0.3" 0.1" PIN SPCNG STRAIGHT 3A RoHS : Not Compliant |
| 20 | ||
| 09932005476 | HARTING Technology Group | CRIMP CONTACT, D-SUB FEMALE AWG 22-26,HMC CAT.7 MOD. RoHS : Compliant |
| 6 | ||
| D38999/32W21R | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 21 ROPE MIL-DTL-38999 THREADED |
| 6 | ||
| D38999/32W13R | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 13 ROPE MIL-DTL-38999 THREADED |
| 6 | ||
| D38999/32W15N | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 15 RING MIL-DTL-38999 THREADED |
| 3 | ||
| 32799 (32799-5) | Klein Tools Inc | PRO IMPACT POWER BIT SET, 26-PIECE |
| 3 | ||
| D38999/32W11R | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 11 ROPE MIL-DTL-38999 THREADED |
| 2 | ||
| D38999/32W13N | Amphenol PCD | SERIES III TV DUST CAP PLUG SIZE 13 RING MIL-DTL-38999 THREADED |
| 1 | ||
| 9932 | CR Seals | SINGLE LIP GREASE SEAL, I.D. 1 IN, O.D. 1.624 IN, THICKNESS 0.25 IN |
| 0 | ||
![]() Microchip Technology Inc | GC9932-127A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 RoHS : Compliant |
| 2,596 | |
| AT9932TS-G | Microchip Technology Inc | AUTOMOTIVE BOOST-BUCK LED LAMP DRIVER IC, TSSOP, Projected EOL: 2035-10-30 RoHS : Compliant |
| 0 | ||
| GC9932-S12 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9932-128A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9932-129A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2051-09-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| AT9932TS-GVAO | Microchip Technology Inc | AUTOMOTIVE BOOST-BUCK LED LAMP DRIVER IC, TSSOP, Projected EOL: 2046-05-11 RoHS : Compliant |
| 0 | ||
| GC9932-127C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9932-129B-TSR | Microchip Technology Inc | Si Schottky Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC99329-174C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
![]() Bisco Industries | 899-320 | Zierick Manufacturing Corporation | 10,161 | |||
| 1109932 | Unbrako Group | 2,300 | ||||
| 111-99-320-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 500 | |||
| 210-99-320-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 274 | |||
| 110-99-324-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 105 | |||
| DIN6799 3.2MM ST | MISC. INDUSTRIAL HRD | 100 | ||||
| 110-99-320-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 100 | |||
| 110-99-324-41-361000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 48 | |||
| D38999/32W25N | MIL-SPEC Connectors | 15 | ||||
| 110-99-322-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 14 | |||
| D38999/32F19R | Amphenol PCD | 13 | ||||
| D38999/32W17R | MIL-SPEC Connectors | 5 | ||||
| 115-99-324-41-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 5 | |||
| 110-99-328-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 3 | |||
| D38999/32J13R | Glenair Inc | 1 | ||||
![]() Rochester Electronics | 99326-E1241 | Infineon Technologies AG | IC Memory |
| 1,965 | |
| 99326-02689 | Infineon Technologies AG | Semiconductor | 960 | |||
| 99326-02831 | Infineon Technologies AG | Semiconductor | 2,442 | |||
5962-89932012A![]() | Analog Devices Inc | IC DAC 1 CONV 8Bits Multiplying DAC Parallel 20-LCC Tube RoHS : Not Compliant |
| 1,202 | ||
TPS79932YZUR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.2V 200mA 5-BGA T/R RoHS : Compliant |
| 135,000 | ||
| TPS79932YZUT | Texas Instruments | Fixed Positive LDO Regulator, 3.2V, 0.175V Dropout, BICMOS RoHS : Compliant |
| 7,750 | ||
![]() Sager | CA1-X0-05-499-321-C | Carling Technologies | Circuit Breakers | 0 | ||
| CA1-X0-10-899-321-VG | Carling Technologies | Circuit Breakers | 0 | |||
| 993271-2 | TE Connectivity | Other Tools BEARING,BALL,SGL ROW,DBL SEAL | 0 | |||
| SW-07-04-T-S-399-325-VS | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 499-93-230-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| EF9932-000 | TE Connectivity | Multi-Conductor Cables PWR0113-8-0 RoHS : Compliant |
| 0 | ||
| 1633993-2 | TE Connectivity | Bench Top Tools PLATE STRIP GUIDE | 0 | |||
| 1999932-2 | TE Connectivity | Crimpers / Crimping Tools INSUL CRIMP 1.40.055 ASSY APPLICATOR TOOL |
| 0 | ||
| 299-3-29066-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CA1-X0-09-932-A21-MG | Carling Technologies | Circuit Breakers | 0 | |||
| 1019932 | Phoenix Contact | Circuit Breakers TMC 72B 03A RoHS : Compliant |
| 0 | ||
| 110-99-320-61-001000 | Mill-Max Mfg Corp | IC & Component Sockets DIP Dual In Line Socket | 0 | |||
| LELK1-1RS4-27129-932 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| P9-932122 | OTTO Engineering Inc | SEALED DOME PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| 19-932.7 | EAO AG | LENS, � 7.3 MM, ILLUMINATED, COLOURLESS, FLUSH, PLASTIC RoHS : Compliant |
| 0 | ||
![]() TME | 2199325-4 | TE Connectivity | Connector: PCB to PCB; PIN: 24; vertical; Inom: 500mA; SMT; on PCBs RoHS : Compliant |
| 3,300 | |
| D38999/32T21N | TE Connectivity | Protection cover; MIL-DTL-38999 Series III; straight RoHS : Compliant |
| 84 | ||
| D38999/32T13N | TE Connectivity | Protection cover; MIL-DTL-38999 Series III; straight RoHS : Compliant |
| 36 | ||
| 4052899326453 | ams OSRAM Group | LED lamp; E14; white warm; 230VAC; 470lm; P: 5.7W; 2700K; CRImin: 80 |
| 16 | ||
09140009932![]() | HARTING Technology Group | Connector: HAN; module; male; 5A; 50V; Han Modular D-Sub; straight RoHS : Compliant |
| 0 | ||
| 1779932 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON M; 12A; 630V RoHS : Compliant |
| 0 | ||
| 204-993-21-38 | MARL International Limited | LED lamp; BI-PIN; white warm; 12VDC; No.of diodes: 1; 5mm; -30÷75°C RoHS : Compliant |
| 0 | ||
| 99327 | HELUKABEL | Cable gland; PG36; IP68; polyamide 6; black; HELUTOP® HT RoHS : Compliant |
| 0 | ||
| 19993238 | KING TONY | Wrench: cross-rim wrench; to wheels; Spanner: 32mm,38mm; L: 400mm |
| 0 | ||
| 2499320000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 41A; 1kV RoHS : Compliant |
| 0 | ||
| 99328 | HELUKABEL | Cable gland; PG42; IP68; polyamide 6; black; HELUTOP® HT |
| 0 | ||
| 16009-9932 | Breve Tufvassons sp z o o | Transformer: encapsulated; 16VA; 400VAC; 9V; 1778mA; PCB; IP00; TEZ |
| 0 | ||
| 19932427 | KING TONY | Wrench: cross-rim wrench; to wheels; 24mm,27mm,32mm; 3/4" |
| 0 | ||
| RST 4L-RKT 4L-993/2 M | Lumberg Automation | Cable: for sensors; M12; PIN: 4; 2m; plug; 60VDC; 50VAC; 16A; Cores: 4 |
| 0 | ||
| 1559932 | Phoenix Contact | Connector: M12; socket; PIN: 12; male; 30V; straight; THT; CuZn; 1.5A RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | SKY13299321LF | Skyworks Solutions Inc | 20 MHZ-5 GHZ 7 W SPDT SWITCH SPDT, 20MHz Min, 5000MHz Max, 1 Func, 1dB Insertion Loss-Max, GAAS RoHS : Compliant | 89 | ||
![]() Interstate Connecting Components | D38999/32W21R | Amphenol PCD | 38999 SIII PLUG D/C SZ 21 OD CAD SS ROPE |
| 9 | |
| D38999/32F13N | Amphenol PCD | 38999 SIII PLUG D/C SZ 13 NICKEL SS ROPE & RING |
| 2 | ||
| D38999/32C25N | Glenair Inc | 38999 CAP PLG SZ 25 |
| 0 | ||
| D38999/32C9R | Glenair Inc | 38999 CAP PLG SZ 9 | 0 | |||
| D38999/32F13N | Glenair Inc | 38999 CAP PLG SZ 13 RoHS : Compliant |
| 0 | ||
| D38999/32F23C | Glenair Inc | 38999 CAP PLG SZ 23 | 0 | |||
| D38999/32F23C | Amphenol PCD | D3899932F23C | 0 | |||
| D38999/32J19N | Amphenol PCD | D3899932J19N | 0 | |||
| D38999/32J19N | Glenair Inc | 38999 CAP PLG SZ 19 | 0 | |||
| D38999/32M17C | Glenair Inc | 38999 CAP PLG SZ 17 | 0 | |||
| D38999/32M17C | Amphenol PCD | D3899932M17C | 0 | |||
| D38999/32W21R | Glenair Inc | 38999 CAP PLG SZ 21 RoHS : Not Compliant |
| 0 | ||
| D38999/32W21R | Conesys | DUST CAP, MIL-DTL 38999 SIII, | 0 | |||
| D3899932W11N | SOURIAU-SUNBANK | 0 | ||||
| D3899932Z23R | SOURIAU-SUNBANK | 0 | ||||
![]() NexGen Digital | 110-99-324-41-001 | Mill-Max Mfg Corp | RoHS : Not Compliant | 212 | ||
| SKY13299-321LF | Skyworks Solutions Inc | RoHS : Compliant | 64 | |||
![]() PEI Genesis | D38999/32W21R | Amphenol PCD |
| 220 | ||
| D38999/32N11N | Amphenol PCD |
| 67 | |||
| D38999/32F13N | Amphenol PCD |
| 0 | |||
| D38999/32F23C | Amphenol PCD |
| 0 | |||
| D38999/32M17C | Amphenol PCD |
| 0 | |||
| D38999/32W21R | SOURIAU-SUNBANK |
| 0 | |||
| D38999/32W21R | SOURIAU-SUNBANK |
| 0 | |||
| JAND38999/32-K-11-C | Amphenol PCD |
| 0 | |||
| JAND38999/32-W-19-C | Amphenol PCD |
| 0 | |||
| JAND38999/32-Z-25-C | Amphenol PCD |
| 0 | |||
| D38999/32-K-21-C | Amphenol PCD |
| 0 | |||
| D38999/32F15R | Amphenol PCD |
| 0 | |||
| D38999/32N21C | Amphenol PCD |
| 0 | |||
| D38999/32W9N | Amphenol PCD |
| 0 | |||
| D38999/32W9N | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | D38999/32W11R | SPI Connects | D38999 Series III Plug Cover,Rope,Cadmiu |
| 446 | |
| D38999/32W9N | SPI Connects | D38999 Series III Plug Cover,Rope,Ring,C |
| 153 | ||
| D38999/32W21R | Amphenol PCD | 38999S3 D/C PLUG SZ 21 CAD OD |
| 145 | ||
| D38999/32W21R | SPI Connects | D38999 Series III Plug Cover,Rope,Cadmiu |
| 103 | ||
| D38999/32N13R | Amphenol PCD | 38999S3 D/C PLUG SZ 13 SS |
| 46 | ||
| D38999/32N11N | Amphenol PCD | 38999S3 D/C PLUG SZ 11 SS |
| 44 | ||
| D38999/32C9R | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 20 | ||
| D38999/32H23C | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 19 | ||
| D3899932W13R | Amphenol PCD | Dust Caps |
| 18 | ||
| D38999/32T11R | TE Connectivity | D38999/32 S3 PLUG CAP SZ11 NIPTFE RP RoHS : Compliant |
| 17 | ||
| D38999/32T23R | TE Connectivity | D38999/32 S3 PLUG CAP SZ23 NIPTFE RP RoHS : Compliant |
| 17 | ||
| D38999/32F13C | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 15 | ||
| D38999/32J25R | Amphenol PCD | D38999S3 D/C PLUG 25 COMP CAD |
| 15 | ||
| D3899932W25R | Amphenol PCD | Dust Caps |
| 2 | ||
| D38999/32C13R | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 2 | ||
![]() Richardson RFPD | SKY13299-321LF-EVB | Skyworks Solutions Inc | SKY13299-321LF RF Switch Evaluation Board RoHS : Compliant |
| 2 | |
| 22649932 | HUBER+SUHNER | Conn Type N-PC2.4 Adapter PL/F 0Hz to 18GHz 50Ohm RoHS : Compliant |
| 0 | ||
| 5226993-2 | TE Connectivity | Conn BNC 0Hz to 4GHz 50Ohm Solder ST Thru-Hole RCP RoHS : Compliant |
| 0 | ||
| AC9004-99-32 | Spectrum Control | STEP ATTENUATOR RoHS : Compliant | 0 | |||
| SI5332ED09932-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 3 RoHS : Compliant | 0 | |||
| SKY13299-321LF | Skyworks Solutions Inc | RF Switch SPDT 20MHz to 5GHz 19dB 12-Pin QFN RoHS : Compliant |
| 0 | ||
| AF9009-9-32 | Spectrum Control | STEP ATTENUATOR RoHS : Compliant |
| 0 | ||
| 9932-100-6005 | Spectrum Control | Feed Through Capacitor RoHS : Compliant |
| 0 | ||
| AF9004-99-32 | Spectrum Control | STEP ATTENUATOR RoHS : Compliant | 0 | |||
| SI5332ED09932-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 3 RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 85999-3255 | Molex | INSTOCK | 10,817 | ||
| 2199325-4 | TE Connectivity | INSTOCK RoHS : Compliant | 5,668 | |||
| APM9932CKC-TRG | ANMOE | INSTOCK | 2,500 | |||
| APM9932CKCTRL | Anpec Electronics Corporation | INSTOCK | 2,500 | |||
| A99322-000 | TE Connectivity | INSTOCK | 1,950 | |||
| 4052899322585- | OSRAM GmbH | INSTOCK | 1,352 | |||
| D38999/32M15R | Glenair Inc | INSTOCK RoHS : Compliant | 50 | |||
![]() Avnet Abacus | 1999932-2 | TE Connectivity | (Alt: 1999932-2) RoHS : Not Compliant | 0 | ||
| D38999/32W9N | Glenair Inc | Connector Accessories Plug Protective Covers Aluminum Olive Drab Cadmium (Alt: D38999/32W9N) RoHS : Compliant | 0 | |||
| D38999/32W9N | Amphenol Corporation | (Alt: D38999/32W9N) RoHS : Not Compliant | 0 | |||
| D38999/32F13N | Glenair Inc | (Alt: D38999/32F13N) RoHS : Compliant | 0 | |||
| D38999/32F13N | Amphenol Corporation | (Alt: D38999/32F13N) RoHS : Not Compliant | 0 | |||
| D38999/32W21R | Amphenol Corporation | (Alt: D38999/32W21R) RoHS : Not Compliant | 0 | |||
| D38999/32W21R | Glenair Inc | (Alt: D38999/32W21R) RoHS : Compliant | 0 | |||
| D38999/32F15R | Glenair Inc | (Alt: D38999/32F15R) RoHS : Compliant | 0 | |||
| D38999/32W11R | Amphenol Corporation | (Alt: D38999/32W11R) RoHS : Not Compliant | 0 | |||
| D38999/32W11R | Glenair Inc | (Alt: D38999/32W11R) RoHS : Compliant | 0 | |||
| D38999/32Z15N | Amphenol Corporation | D38999 DUST CAP (Alt: D38999/32Z15N) RoHS : Compliant | 0 | |||
| D38999/32Z15N | Glenair Inc | (Alt: D38999/32Z15N) RoHS : Compliant | 0 | |||
| D38999/32Z23N | Amphenol Corporation | (Alt: D38999/32Z23N) RoHS : Not Compliant | 0 | |||
| D38999/32F25N | Amphenol Corporation | D38999 DUST CAP (Alt: D38999/32F25N) RoHS : Not Compliant | 0 | |||
AX7DAF1-699.3266T![]() | Abracon Corporation | - Tape and Reel (Alt: AX7DAF1-699.3266T) RoHS : Compliant | 0 | |||
![]() Avnet Asia | D38999/32Z25R | Amphenol Corporation | (Alt: D38999/32Z25R) RoHS : Compliant | 0 | ||
| 2499325-2 | TE Connectivity | (Alt: 2499325-2) RoHS : Compliant | 0 | |||
| 2499325-1 | TE Connectivity | CAB ASY T6N HPR BUSBAR-PB 54V 1A TYC (Alt: 2499325-1) RoHS : Compliant | 0 | |||
| 0859993255 | Molex | Dust Cover, 44915 Series, Black, RJ45, RJ45 8 Position Modular Jack Connector, -40 to 85 ?C (Alt: 0859993255) RoHS : Compliant | 0 | |||
| 10199329-01-F001LF | Amphenol Corporation | (Alt: 10199329-01-F001LF) RoHS : Compliant | 0 | |||
| D38999/32W11R | Amphenol Corporation | (Alt: D38999/32W11R) RoHS : Compliant | 0 | |||
| D38999/32W21R | Amphenol Corporation | (Alt: D38999/32W21R) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AX7DAF1-699.3266T![]() | Abracon Corporation | XTAL OSC XO 699.3266MHZ LVDS SMD RoHS : Compliant |
| 0 | |
![]() Component Electronics, Inc | 85999-3256 | Molex | IN STOCK SHIP TODAY |
| 8,244 | |
| 0859993256 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,244 | ||
| S553-5999-32 | Bel Fuse | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| 993217 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY | 120 | |||
| 110-99-324-41-001000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 45 | ||
| 019932323 | TE Connectivity | IN STOCK SHIP TODAY | 18 | |||
QS5993-2QC![]() | Integrated Device Technology Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
| 145-5036-0993-201 | Dialight | IN STOCK SHIP TODAY |
| 5 | ||
| 110-99-320-41-001000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| 110-99-328-41-001000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
![]() DB Roberts | CM-99-329 | Southco |
| 3,700 | ||
| YPF11-99325 | PennEngineering (PEM) |
| 234 | |||
| 29932000 | GRIPCO STANLEY | 0 | ||||
| 4579-932-N | RAF Electronic Hardware | 0 | ||||
| 17W09932B | Essentra Components | FLAT WASHER, .390 ID, 1.000 OD | 0 | |||
| 17W09932 | Essentra Components | FLAT WASHER, .390 ID, 1.000 OD | 0 | |||
| 499324 | Essentra Components | NYLON HEX FOOT M8 X 15 | 0 | |||
![]() EBV Elektronik | VLWR9932 | Vishay Intertechnologies | TELUX RED 90 762MM SQUARE PACK e4 (Alt: VLWR9932) RoHS : Compliant | 980 | ||
| 99326-E0659-A | Infineon Technologies AG | Flash Memory 1M8512k16 18V (Alt: 99326-E0659-A) RoHS : Compliant | 0 | |||
![]() Master Electronics | D3899932W13R | Amphenol PCD | Dust Cap - D38999/32 - Plug Cap - Cadmium RoHS : Compliant |
| 90 | |
| 99-32-513 | Visual Communications Company | RoHS : Compliant |
| 20 | ||
| D38999/32F13N | TE Connectivity | PROTECTIVE COVER RoHS : Compliant |
| 0 | ||
| 993271-2 | TE Connectivity | BEARING BALL SGL ROW DBL SEAL RoHS : Compliant |
| 0 | ||
| RCV-00109932 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| SW-07-04-T-S-399-325-VS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 049932-0004 | ITT Interconnect Solutions | KPT06J128S; MIL-DTL 26482 Series I & Mil Battery; RoHS : Compliant |
| 0 | ||
| ZPF000000000139932 | TE Connectivity | DBAS 74-61-42 PX 090 A5534 RoHS : Not Compliant |
| 0 | ||
| D38999/32T11R | TE Connectivity | Connector Accessories Dust Cover Assembly Straight Aluminum Nickel-PTFE RoHS : Compliant |
| 0 | ||
| D38999/32W9N | TE Connectivity | Circular MIL Spec Connector PLUG DUST CAP RoHS : Compliant |
| 0 | ||
| EF9932-000 | TE Connectivity | PWR0113-8-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1633993-2 | TE Connectivity | PLATE STRIP GUIDE RoHS : Not Compliant |
| 0 | ||
| D38999/32T23R | TE Connectivity | Connector Accessories Protective Cover With Rope Eyelet Straight Aluminum Alloy/Stainless Steel Nickel-PTFE/Passivated RoHS : Compliant |
| 0 | ||
| 1019932 | Phoenix Contact | Thermomagnetic device circuit breaker - number of positions: 2 - connection method: Screw - cross section: 1 mm²- 35 mm² - AWG: 18 - 2 - width: 35.3 mm - mounting type: DIN rail: 35 mm - Color: gray RoHS : Compliant |
| 0 | ||
| 000299320 | ITT Interconnect Solutions | Conn Circular M 35 POS Crimp ST Cable Mount 35 Terminal 1 Port Automotive RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W02993-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to SMA Male Right Angle Cable 200 cm Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to SMA male right angle cable 200 cm length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 200 cm length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W02993-200CM, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02993-200CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02993-200CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 200 cm length using PE-SR405FLJ coax. |
| 1,308 | |
| PE3C9932 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 2.2-5 Male to 4.3-10 Male Low PIM Cable Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to 4.3-10 male low PIM cable using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to 4.3-10 male low PIM cable using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C9932 can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C9932 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to 4.3-10 plug cable assembly PE3C9932 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C9932 can also be used in the other direction and will be a 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to 4.3-10 low PIM RF cable assembly as per your requirements. | 400 | |||
| PE3C9932-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Plenum 2.2-5 Male to 4.3-10 Male Low PIM Cable 50 CM Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C9932-50CM can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C9932-50CM RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to 4.3-10 plug cable assembly PE3C9932-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C9932-50CM can also be used in the other direction and will be a 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 80 | ||
| PE3C9932-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum 2.2-5 Male to 4.3-10 Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to 4.3-10 male low PIM cable 24 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to 4.3-10 male low PIM cable 24 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C9932-24 can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C9932-24 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to 4.3-10 plug cable assembly PE3C9932-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C9932-24 can also be used in the other direction and will be a 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 80 | ||
| PE3C3993-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On MMBX Plug to N Female Bulkhead Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly snap-on MMBX plug to N female bulkhead cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to N female bulkhead cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and N type bulkhead cable connection on the other. Our MMBX to type N cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to type N cable is a plug to female coax assembly, PE3C3993-24, can also be known as a MMBX male to type N jack cable assembly and will be shipped same-day as it is purchased. MMBX male to N type jack cable assembly PE3C3993-24 is built with RG178 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX plug to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3993-24 can also be used in the other direction and will be type N female bulkhead to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to type N cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to N female bulkhead cable 24 inch length using RG178 coax. |
| 18 | ||
| PE9932-6-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Alligator Clip to Alligator Clip Cable 6 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9932-6-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9932-6-B Alligator clip to alligator clip test equipment lead using Black Wire cable has a 6 inch length. Pasternack alligator to alligator Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9932-72-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 72 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-72-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-72-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 72 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9932-60-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 60 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-60-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-60-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 60 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9932-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-18-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE3W19932 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. MHV Female Bulkhead to MHV Male Cable Using RG214 Coax. PE3W19932 is a MHV female bulkhead to MHV male cable using RG214 coax. This Pasternack MHV female bulkhead to MHV male cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm MHV for connector 2. Our female MHV bulkhead to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19932 MHV female bulkhead to MHV male cable assembly is constructed with RG214 coax. | 0 | |||
| PE3C9993-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to TNC Female Low Loss Cable 200 cm Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 200 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 200 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C9993-200CM can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9993-200CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C9993-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9993-200CM can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE9932-36-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 36 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-36-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-36-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 36 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE3993-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR401AL Coax., Radio frequency assembly N male to N female bulkhead cable 24 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 24 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3993-24, can also be known as a N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3993-24 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3993-24 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 24 inch length using PE-SR401AL coax. |
| 0 | ||
| PE3W09932 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to QMA Male Right Angle Cable Using LMR-195-FR Coax. PE3W09932 is a 7/16 DIN male to QMA male right angle cable using LMR-195-FR coax. This Pasternack 7/16 DIN male to QMA male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm QMA for connector 2. 7/16 DIN to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09932 7/16 DIN male to QMA male right angle cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE9932-72-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Alligator Clip to Alligator Clip Cable 72 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9932-72-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9932-72-B Alligator clip to alligator clip test equipment lead using Black Wire cable has a 72 inch length. Pasternack alligator to alligator Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
![]() Vyrian | 5962R8993201VEX![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, CDIP16 | 12,113 | ||
5962R8993202V2A![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, CQCC20 RoHS : Not Compliant | 10,686 | |||
| MAX9932EUA-T | Analog Devices (Maxim Integrated) | 10,224 | ||||
| MAX9932EUA | Analog Devices (Maxim Integrated) | 10,157 | ||||
| 5962L8993203VFA | Analog Devices Inc | D/A Converter, 1 Func, CDFP16 RoHS : Not Compliant | 8,822 | |||
| MAX9932EUA+T | Analog Devices Inc | Wide Band Low Power Amplifier, 2MHz Min, 1600MHz Max RoHS : Compliant | 8,400 | |||
5962R8993201V2A![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, CQCC20 RoHS : Not Compliant | 7,384 | |||
5962-89932012A![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, 0.085us Settling Time, CQCC20 RoHS : Not Compliant | 7,270 | |||
| MAX9932EUA+ | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, BIPolar, PDSO8 RoHS : Compliant | 6,708 | |||
5962-89932012X![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, 0.085us Settling Time, CQCC20 | 6,645 | |||
5962R8993201V2X![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, CQCC20 | 6,040 | |||
5962R8993201VEA![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, CDIP16 RoHS : Not Compliant | 5,587 | |||
5962R8993201VFA![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, 0.135us Settling Time, CDFP16 RoHS : Not Compliant | 5,449 | |||
5962R8993201VFX![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, CDFP16 | 5,239 | |||
| PMP7993.2 | Texas Instruments | 3,195 | ||||
![]() Win Source Electronics | SKY13299-321LF | Skyworks Solutions Inc | IC SWITCH SPDT 100M-4GHZ 12-QFN RoHS : Compliant |
| 6,743 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |