| Electronic Components Datasheet Search |
|
9622 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 206996-2203 | Molex | Connector: wire-wire; female; Automotive; PIN: 2; straight; crimped |
| 2,400 | |
| 10139622 | Essentra Components | Washer; round; h=6.4mm; D=9.5mm; polyamide; natural |
| 670 | ||
| 1962-203-0831 | TE Connectivity | Connector: circular; socket; Automotive; 46A; straight; for cable RoHS : Compliant |
| 237 | ||
| 1-1879622-5 | TE Connectivity | Resistor: thin film; 510kΩ; THT; 1W; ±1%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 09170249622 | HARTING Technology Group | Connector: IDC; SEK; PIN: 24; straight; THT; polycarbonate RoHS : Compliant |
| 0 | ||
| 09181089622 | HARTING Technology Group | Connector: IDC; SEK Low Profile; PIN: 8; straight; THT; tinned; PBT RoHS : Compliant |
| 0 | ||
| 1-1879622-3 | TE Connectivity | Resistor: thin film; 430kΩ; THT; 1W; ±1%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 09170149622 | HARTING Technology Group | Connector: IDC; SEK; PIN: 14; straight; THT; polycarbonate RoHS : Compliant |
| 0 | ||
| 1-1879622-2 | TE Connectivity | Resistor: thin film; 390kΩ; THT; 1W; ±1%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 2496220000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; OMNIMATE; 24A RoHS : Compliant |
| 0 | ||
| 1-1879622-4 | TE Connectivity | Resistor: thin film; 470kΩ; THT; 1W; ±1%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 1-1879622-1 | TE Connectivity | Resistor: thin film; 360kΩ; THT; 1W; ±1%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 79622-08 | KING TONY | Bearing puller; 2-armig; 8" |
| 0 | ||
| 89622 | Delock | Antenna: communication; GSM,LTE,UMTS,inner; white; SMA; screw-in |
| 0 | ||
| 89622 | ProLinear/PONTECH Inc | Cutting diamond wheel; Ø: 230mm; Disc thick: 3mm; 22.23mm |
| 0 | ||
![]() Verical | 9622823001 | TE Connectivity | High Performance Cable 22AWG 1.4mm Bare Copper Yellow 50V RoHS : Compliant |
| 15,000 | |
![]() Avnet Americas | 73962-2000 | Molex | - Bulk (Alt: 0739622000) RoHS : Compliant |
| 3,000 | |
| 67996-224 | Amphenol Corporation | - Bulk (Alt: 67996-224) RoHS : Not Compliant | 112 | |||
| AC-209622002 | Ampere | Microprocessor, 96 Cores, 64-bit, ARM v8.2, 3 GHz, FCLGA, 4926 Pins - Trays (Alt: AC-209622002) RoHS : Compliant |
| 17 | ||
| M85049/62-22WD | Glenair Inc | - Bulk (Alt: M85049/62-22WD) RoHS : Not Compliant |
| 0 | ||
| M85049/62-20WD | Glenair Inc | - Bulk (Alt: M85049/62-20WD) RoHS : Not Compliant |
| 0 | ||
| 3-994962-2 | TE Connectivity | SCREW,HEX SOCKET HEAD,M5X35,FULL THREAD - Bulk (Alt: 3-994962-2) RoHS : Not Compliant |
| 0 | ||
| 201196-2222 | Molex | Connector Housing, Receptacle, 22 Contacts, 2 Rows, 2 mm, 201196 Series, PBT, Spot-On, Red - Bulk (Alt: 2011962222) RoHS : Compliant |
| 0 | ||
| 1099622 | Qorvo | - Gel-pak, waffle pack, wafer, diced wafer on film (Alt: 1099622) RoHS : Not Compliant |
| 0 | ||
| M85049/62-20W | Amphenol Corporation | - Bulk (Alt: A850496220W) RoHS : Not Compliant |
| 0 | ||
| MAL215296223E3 | Vishay Intertechnologies | 22uF 400V 16x20 105?C 4000h - Ammo Pack (Alt: MAL215296223E3) RoHS : Compliant |
| 0 | ||
| A51-427-3196-220 | ITT Interconnect Solutions | - Bulk (Alt: A51-427-3196220) RoHS : Compliant | 0 | |||
| B51-007-3196-220 | ITT Interconnect Solutions | - Bulk (Alt: B51-007-3196220) RoHS : Compliant |
| 0 | ||
| M85049/96-22-A | Amphenol Corporation | MOUNT FLANGE 1/4 PERIMETER SIZE 22 - Bulk (Alt: A850499622A) RoHS : Not Compliant |
| 0 | ||
| MAL214896226E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 2200 uF, 25 V, ? 20%, 3000 hours @ 105?C, Radial Leaded - Bulk (Alt: MAL214896226E3) RoHS : Compliant |
| 0 | ||
| MAL215296225E3 | Vishay Intertechnologies | 22uF 400V 16x20 105?C 4000h - Bulk (Alt: MAL215296225E3) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 09181209622 | HARTING Technology Group | Headers & Wire Housings 20P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 6,496 | |
| 09181109622 | HARTING Technology Group | Headers & Wire Housings 10P 2 ROW PCB TRANS LOW PROFILE 5.5MM RoHS : Compliant |
| 3,567 | ||
| 09181169622 | HARTING Technology Group | Headers & Wire Housings 16P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 3,053 | ||
| 09181349622 | HARTING Technology Group | Headers & Wire Housings 34P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 1,947 | ||
| 09181069622 | HARTING Technology Group | Headers & Wire Housings 6P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 1,178 | ||
| 09181149622 | HARTING Technology Group | Headers & Wire Housings 14P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 1,132 | ||
| 09181269622 | HARTING Technology Group | Headers & Wire Housings 26P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 1,107 | ||
| 09181409622 | HARTING Technology Group | Headers & Wire Housings 40P 2 ROW SLDR PINS PCB TRANSITION RoHS : Compliant |
| 676 | ||
| 09181089622 | HARTING Technology Group | Headers & Wire Housings SEK PBC SVML 2R 08P SN-DESIGN 2 LP RoHS : Compliant |
| 284 | ||
| 09181509622 | HARTING Technology Group | Headers & Wire Housings SEK PBC SVML 2R 50P SN-DESIGN 2 LP RoHS : Compliant |
| 174 | ||
| 09181249622 | HARTING Technology Group | Headers & Wire Housings SEK PBC SVML 2R 24P SN-DESIGN 2 LP RoHS : Compliant |
| 100 | ||
| 09181609622 | HARTING Technology Group | Headers & Wire Housings SEK PBC SVML 2R 60P SN-DESIGN 2 LP RoHS : Compliant |
| 16 | ||
| 09181649622 | HARTING Technology Group | Headers & Wire Housings SEK PBC SVML 2R 64P SN-DESIGN 2 LP RoHS : Compliant |
| 0 | ||
| 1301790116 | Molex | Wire Ducting & Raceways LOCK LEVER ARM FOR SCROLL LOCK ASSY RoHS : Not Applicable |
| 0 | ||
| 9622 | Heyco | Conduit Fittings & Accessories SMP R-1250 BLACK LDPE RECESSED RoHS : Compliant |
| 0 | ||
![]() Newark | 206996-2201 | Molex | Conn Housing, Rcpt, 2Pos, 4.5Mm, Blue; Product Range:Cp-4.5 206996 Series; Gender:Receptacle; No. Of Positions:2Positions; Pitch Spacing:4.5Mm; For Use With:Molex Cp-4.5 206999-8000, Cp-4.5 207000-8000 Genderless Contacts Rohs Compliant: Yes RoHS : Compliant |
| 2,390 | |
| 206996-2211 | Molex | Conn Housing, Rcpt, 2Pos, 4.5Mm, Natural; |Molex 206996-2211 RoHS : Compliant |
| 1,064 | ||
| 206996-2201 | Molex | Conn Housing, Rcpt, 2Pos, 4.5Mm, Blue; |Molex 206996-2201 RoHS : Compliant |
| 1,024 | ||
| 9622 060500 | Belden Inc | 25 #16 Pvc Pvc; |Belden 9622 060500 RoHS : Compliant |
| 500 | ||
| 7TCA296220R0121 | ABB Low Voltage Products and Systems | 238-B-M10 Miniature Cable Glandcolor - B; |Abb 7TCA296220R0121 RoHS : Compliant |
| 91 | ||
| M85049/62-24N | Glenair Inc | Conn Clamp, 24, 30.2Mm, Aluminum; |Glenair M85049/62-24N RoHS : Compliant |
| 64 | ||
| 09170289622 | HARTING Technology Group | Header Connector, pcb Mount, plug,28 Contacts, skt,0.1 Pitch, pc Tail Terminal Rohs Compliant: Yes |Harting 09170289622 RoHS : Compliant |
| 63 | ||
| MP009622 | SPC Multicomp | Heavy Duty Insert, 12+Pe, Rcpt, Sz 3A; |Multicomp Pro MP009622 RoHS : Compliant |
| 58 | ||
| 09 18 114 9622 | HARTING Technology Group | Pin Header, 09 18 114 9622; |Harting 09 18 114 9622 RoHS : Compliant |
| 51 | ||
| 39-29-6228 | Molex | Connector, Header, 22Pos, 2Row, 4.2Mm; |Molex 39-29-6228 RoHS : Compliant |
| 44 | ||
| 09181349622 | HARTING Technology Group | Connector, Rcpt, 34Pos, 2Row, 2.54Mm; |Harting 09181349622 RoHS : Compliant |
| 36 | ||
| 7TCA296220R0419 | ABB Low Voltage Products and Systems | Stopping Plug, Nylon 6.6, M20, Grey; |Abb 7TCA296220R0419 RoHS : Compliant |
| 25 | ||
| CFM-4056BG-1230-696-22 | Same Sky | Dc Fan, 39.42Cfm, 69.6Dba, 12Vdc; |Same Sky CFM-4056BG-1230-696-22 RoHS : Compliant |
| 20 | ||
| FMCA2962-24 | Fairview Microwave Inc | Cbl Assy, 2.92Mm Jack-Jack, 50 Ohm, 24"; |Fairview Microwave FMCA2962-24 RoHS : Not Compliant |
| 1 | ||
| 9622 | Molex | |Molex 9622 RoHS : Not Compliant |
| 0 | ||
![]() RS | 5962-203-04141 | TE Connectivity | SOCKET, SOLID, SIZE 4, 4AWG, NICKEL RoHS : Compliant |
| 44 | |
| 09170249622 | HARTING Technology Group | RIGHT ANGLE CABLE MOUNT IDC CONNECTOR PLUG, 24 WAY, 2 ROW, 2.54MM PITCH RoHS : Compliant |
| 37 | ||
| X3029622 | Norgren | VALVE, 5/2, MANUAL, BLACK LEVER, LEVER RETURN, 1/8NPT |
| 34 | ||
| 1196227 (FL SWITCH 1608) | Phoenix Contact | UNMANAGED SWITCH 8 X M12 (X-CODE) PORTS, 10/100 MBPS |
| 30 | ||
| 7350001160962 (2306178) | OKdo | KKSB DIN RAIL CLIP |
| 28 | ||
| 96229 | Brady Worldwide Inc | SPILL MAGNET DRAIN COVER, 12" DIA |
| 6 | ||
| 03029622 | Norgren | VALVE, MECH, 1/8" 3/2 TOGGLE LEVER SPRING |
| 5 | ||
| 2453962 (25533008) (HCI805002751-050RS) | RS Pro | 1/2-13 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, COARSE |
| 5 | ||
| 42819-6223 | Molex | MINI-FIT SR HEADER 10.00MM VERTICAL 6PIN RoHS : Compliant |
| 3 | ||
| 1196228 (FL SWITCH 1708) | Phoenix Contact | UNMANAGED SWITCH 8 X M12 (X-CODE) PORTS, 10/100/1000 MBPS |
| 3 | ||
| 2962-20 | Milwaukee Electric Tool Corporation | M18 FUEL 1/2-INCH MID-TORQUE IMPACT WRENCH WITH FRICTION RING BARE TOOL |
| 2 | ||
| YM8U13-050VA1XLEAX (2096226) | SICK AG | CORDSET, CONNECTING CABLES, YM8U13-050VA1XLEAX |
| 1 | ||
| YI2A14-050VB3XLEAX (2096223) | SICK AG | CORDSET, CONNECTING CABLES, YI2A14-050VB3XLEAX |
| 1 | ||
| 2454962 (25532583) (SSCIA0500125-050RS) | RS Pro | SCREW, 1/2-13 X 1 1/4 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 1 | ||
| 9622 | Heyco | HOLE PLUG, EVA/LDPE, BLACK, HOLE SIZE 1.2300-1.2700 IN, SMP SERIES |
| 0 | ||
![]() Microchip Technology Inc | LE9622RQCT | Microchip Technology Inc | 2CH 120V ABS miSLIC PCM, 53QFN, T&R, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 279,000 | |
| LE9622RQC | Microchip Technology Inc | 2CH 120V ABS miSLIC PCM, 53QFN, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 173,680 | ||
| 5962-2221036QXF | Microchip Technology Inc | RTPF500ZTLS-CG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2221037QZC | Microchip Technology Inc | RTPF500ZT-LG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2221038QZC | Microchip Technology Inc | RTPF500ZT-1LG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2221041QZC | Microchip Technology Inc | RTPF500ZTS-1LG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2221040QZC | Microchip Technology Inc | RTPF500ZTS-LG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2120201QXC | Microchip Technology Inc | 5962-2120201QXC, Projected EOL: 2051-02-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| 5962-2221014QZC | Microchip Technology Inc | RTPF500T-1LG1509B Recommend RTPF500ZT-1LG1509B for new designs., Projected EOL: 2027-07-31 - Contact for Pricing | 0 | |||
| 5962-2120201VXC | Microchip Technology Inc | 5962-2120201VXC, Projected EOL: 2051-02-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| 5962-2221034QXF | Microchip Technology Inc | RTPF500ZTS-CG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2221016QZC | Microchip Technology Inc | RTPF500TS-LG1509B Recommend RTPF500ZTS-LG1509B for new designs., Projected EOL: 2027-07-31 - Contact for Pricing | 0 | |||
| 5962-2221035QXF | Microchip Technology Inc | RTPF500ZTS-1CG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| 5962-2221011QXF | Microchip Technology Inc | RTPF500TS-1CG1509E, Projected EOL: 2027-07-31 - Contact for Pricing | 0 | |||
| 5962-2221028QXF | Microchip Technology Inc | RTPF500ZTS-CG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
![]() Bisco Industries | M19622/14-0002 | MIL-SPEC Wire Cable Tubing Sleeve | 240 | |||
| M19622/1-005 | MIL-SPEC Wire Cable Tubing Sleeve | 168 | ||||
| M19622/16-0006 | MIL-SPEC Wire Cable Tubing Sleeve | 140 | ||||
| M19622/18-0018 | MIL-SPEC Wire Cable Tubing Sleeve | 137 | ||||
| M19622/1-001 | MIL-SPEC Wire Cable Tubing Sleeve | 118 | ||||
| M19622/17-0004 | MIL-SPEC Wire Cable Tubing Sleeve | 73 | ||||
| 66.9196-22 | MISCELLANEOUS | 15 | ||||
| M19622/14-002 | MIL-SPEC Wire Cable Tubing Sleeve | 15 | ||||
| M19622/19-0009 | MIL-SPEC Wire Cable Tubing Sleeve | 11 | ||||
| 050-024-3196220 | ITT Interconnect Solutions | RoHS : Not Compliant | 7 | |||
| M19622/19-0004 | MIL-SPEC Wire Cable Tubing Sleeve | 5 | ||||
| 050-328-3196220 | ITT Interconnect Solutions | 5 | ||||
| M19622/1-004 | MIL-SPEC Wire Cable Tubing Sleeve | 4 | ||||
| 050-311-3196220 | ITT Interconnect Solutions | 2 | ||||
| 051-427-3196220 | ITT Interconnect Solutions | 1 | ||||
![]() Future Electronics | 9622 | Heyco | RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | XC5C-9622 | Aratas Corporation | Conn DIN 41612 PL 96 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 60 | |
| 9622 | Woodhead Molex | SCROLL LOCK - LOCK LEVER ARM RoHS : Compliant |
| 0 | ||
| 9622 | Heyco | SMP R-1250 BLACK RoHS : Compliant |
| 0 | ||
| 9622 | Johanson Manufacturing | Seal-Trim Variable Capacitor - 2.5 to 10pF - 250 WVDC - Q:1000 @ 100MHz - Vertical, Through Hole |
| 0 | ||
| 9622-50 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 9622-1000 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 9622-01 | Littelfuse Commercial Vehicle Products | SW IGN 2POS RoHS : Compliant |
| 0 | ||
| 9622-P | Heyco | SMP R-1250 BLACK 100PK RoHS : Compliant |
| 0 | ||
| VHT-9622 | Quest Technology International Inc | Dual 8P8C / Dual F-81 Molded Plate Ivory RoHS : Compliant |
| 0 | ||
| XC5C-9622-A | Aratas Corporation | DIN CONNECTOR 20 POS RoHS : Compliant |
| 0 | ||
| XC5H-9622 | Aratas Corporation | Conn DIN 41612 SKT 96 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 0 | ||
| XC5H-9622-A | Aratas Corporation | DIN Connector RoHS : Compliant |
| 0 | ||
| 9622-100 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 9622-500 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 9622-060100 | Belden Inc | MULTI CONDUCTOR, 25 COND, 16AWG STRAND (19X29), PVC INSULATE, CONTROL/INSTRUMENT RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | PCA9622DR/S911,118 | NXP Semiconductors | PCA9622 - I2C 40V Voltage Source LED Controller RoHS : Compliant |
| 65,347 | |
AD9622AN![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 12000uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant |
| 208 | ||
| IRF9622 | Harris Semiconductor | Power Field-Effect Transistor, 3A I(D), 200V, 2.4ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant |
| 1,128 | ||
| IRF9622156 | Harris Semiconductor | 3A, 200V, 2.4ohm, P-Channel, Power Mosfet RoHS : Not Compliant |
| 800 | ||
| DS9622MJ-MIL | National Semiconductor Corporation | Line Receiver, 2 Func, 2 Rcvr, BIPolar RoHS : Not Compliant |
| 271 | ||
| DS9622MW/883 | National Semiconductor Corporation | Line Receiver, 2 Func, 2 Rcvr, BIPolar, CDFP14 RoHS : Not Compliant |
| 4 | ||
![]() Sager | 1-455962-2 | TE Connectivity | Crimpers / Crimping Tools INSERT ANVIL | 0 | ||
| 3-994962-2 | TE Connectivity | SCREW,HEX SOCKET HEAD,M5X35,FULL THREAD |
| 0 | ||
| 219-6-22220-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 2909622 | Phoenix Contact | D-Sub Cables CAB-DSUB37M/OE /22/S/ 1M | 0 | |||
| AAE9622-00 | TE Connectivity | TE Connectivity 100P2627-50-10-1-CHP-X-JP-L40 | 0 | |||
| CA1-X0-18-299-622-MF | Carling Technologies | Circuit Breakers | 0 | |||
| 7-2266962-2 | TE Connectivity | Other Tools | 0 | |||
| 5-2151962-2 | TE Connectivity | TE Connectivity OCEAN-2.0-APPLICATOR-S-080F125OA | 0 | |||
| 8861019622 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| CA2-X0-20-849-622-R | Carling Technologies | Circuit Breakers | 0 | |||
| 985962-2 | TE Connectivity | TE Connectivity FILTER, COALESCING | 0 | |||
| G9622HD | ABB Group | Thomas & Betts | 0 | |||
| D96223-000 | TE Connectivity | Rectangular MIL Spec Connectors MTCPQKT2R22PGBB | 0 | |||
| CT1-X0-12-449-622-H | Carling Technologies | Circuit Breakers | 0 | |||
| 1419622 | Phoenix Contact | Heavy Duty Power Connectors HC-D07-SP-RBK |
| 0 | ||
![]() Ameya Holding Limited | B39212B9622P810 | RF360 Holdings Singapore Pte Ltd | 4,403 | |||
![]() ComSIT USA | 9181109622 | HARTING Technology Group | SEK 2 ROWS STRAIGHT PINS ASSEMBLY Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Gray Insulator, Receptacle RoHS : Compliant | 138 | ||
![]() Interstate Connecting Components | M85049/62-20WD | MISC MIL-AERO | D52 - SHRINK BOOT ADAPT STRT MIL | 14 | ||
| M19622/17-0005 | MISC MIL-AERO | SIZE 2E PACKING ASSEMBLY TUBE ID .472 | 12 | |||
| M1962221001SEEM1962221 | MISC MIL-AERO | NYLON STUFFING TUBE | 3 | |||
| M85049/62-20W | Amphenol PCD | 38999 SI/II Backshell Shrink Boot |
| 2 | ||
| M85049/96-22-A | Abbotec Incorporated | MOUNTING PLATE PAINTED |
| 1 | ||
| B51-007-3196220 | ITT Interconnect Solutions | SMB PLUG STR RG178 - CLAMP VER RoHS : Compliant | 0 | |||
| 3-994962-2 | TE Connectivity | SCREW,HEX SOCKET HEAD,M5X35,FU | 0 | |||
| 962214-000 | TE Connectivity | HEL-6500 | 0 | |||
| 70-169622-34S | Amphenol Industrial Operations | PLUG | 0 | |||
| M85049/62-20W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/62-20WD | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Unknown |
| 0 | ||
| M85049/62-20WD | Amphenol PCD | 38999 SI/II Backshell Shrink Boot |
| 0 | ||
| M85049/96-22-A | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant |
| 0 | ||
| M85049/96-22-A | Amphenol PCD | M8504996-22-A | 0 | |||
| M85049/62-22WD | Amphenol PCD | 38999 SI/II Backshell Shrink Boot |
| 0 | ||
![]() PEI Genesis | ATM396-22 | Abbotec Incorporated |
| 0 | ||
| 10-405996-221 | Amphenol Corporation |
| 0 | |||
| M85049/6-22S | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-20W | Amphenol PCD |
| 0 | |||
| M85049/62-20W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-20WD | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-20WD | Amphenol PCD |
| 0 | |||
| M38999/6-22B09 | SOURIAU-SUNBANK |
| 0 | |||
| B51-007-3196-220 | ITT Interconnect Solutions |
| 0 | |||
| M85049/96-22-A | Abbotec Incorporated |
| 0 | |||
| M38999/6-22F05B | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-22F05C | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-22WD | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-22WD | Amphenol PCD |
| 0 | |||
| M38999/6-22B04C | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 9622823001 | TE Connectivity | Connectors RoHS : Compliant |
| 9,900 | |
| 1879622-2 | TE Connectivity | Resistors RoHS : Compliant |
| 6,930 | ||
| 350962-2 | TE Connectivity | Connectors |
| 3,300 | ||
| 1962-203-08233 | TE Connectivity | DEUTSCH CONNECTOR 1962-203-08233 |
| 196 | ||
| Y1962-201-16900000 | TE Connectivity | CONNECTOR (MFR REF 1962-201-16900000) |
| 124 | ||
| M85049/62-24W | SPI Connects | Backshell, Straight Shrink Boot Adpater |
| 20 | ||
| 249622-000 | TE Connectivity | CABLE-PROT PART (TE REF 249622-000) RoHS : Compliant |
| 7 | ||
| M85049/96-22 | Glenair Inc | ACCESSORIES - NUT PLATES |
| 4 | ||
| 75-69622-2S | Amphenol Corporation | CONNECTOR |
| 2 | ||
| 75-69622-22S | Amphenol Corporation | CONNECTOR |
| 2 | ||
| 71-196224-31S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 2 | ||
| 75-69622-22P | Amphenol Corporation | CONNECTOR |
| 2 | ||
| M85049/62-20W | Glenair Inc | SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 1 | ||
| 7-1633962-2 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
| M85049/62-20N | Glenair Inc | SHRINK BOOT ADAPTERS |
| 1 | ||
![]() Richardson RFPD | 80396223 | HUBER+SUHNER | 80396223 RoHS : Compliant | 0 | ||
| SI5338C-B09622-GM | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| 80396222 | HUBER+SUHNER | MINIBEND LPR-12, SMA (male), MMPX (male), Ruggediz |
| 0 | ||
| SI5338C-B09622-GMR | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 9622823001- | TE Connectivity | INSTOCK | 19,500 | ||
| 5496224- | Vishay Draloric | INSTOCK | 14,000 | |||
| 928962-2 | TE Connectivity | INSTOCK RoHS : Compliant | 7,800 | |||
| 09 18 110 9622 | HARTING Technology Group | INSTOCK | 6,838 | |||
| 09 18 116 9622 | HARTING Technology Group | INSTOCK | 2,986 | |||
| 09 18 106 9622 | HARTING Technology Group | INSTOCK | 2,428 | |||
| 0-0929622-1 | INSTOCK | 1,384 | ||||
| L15JZ9622P | INSTOCK | 284 | ||||
| M19622/3-002 | INSTOCK | 8 | ||||
![]() Avnet Abacus | PG1096.223NLT | Pulse Electronics Corporation | Power Inductor SMD 22 uH 20 17 A Shielded 19 A 26mm x 26mm x 148mm - Tape and Reel (Alt: PG1096.223NLT) RoHS : Compliant | 420 | ||
| 39296228 | Molex | Conn Power HDR 22 POS 42mm Solder ST ThruHole 22 Terminal 1 Port Bag (Alt: 39296228) RoHS : Compliant | 0 | |||
| 749622000 | Molex | (Alt: 749622000) RoHS : Compliant | 0 | |||
| 1633962-2 | TE Connectivity | CRIMPER INSULATION F PREMIUM (Alt: 1633962-2) RoHS : Not Compliant | 0 | |||
| 1633962-2 | TE Connectivity | CRIMPER INSULATION F PREMIUM (Alt: 1633962-2) RoHS : Not Compliant | 0 | |||
| 0962223001 | TE Connectivity | (Alt: 0962223001) RoHS : Compliant | 0 | |||
| BFC246962223 | Vishay Intertechnologies | Film Capacitor 0022 uF 250 V 630 V 5 Metallized PET Radial Box 2 Pin (Alt: BFC246962223) RoHS : Compliant | 0 | |||
| 0035.9622.44 | Schurter Electronic Components | (Alt: 0035.9622.44) RoHS : Compliant | 0 | |||
| M85049/62-20W | Amphenol Corporation | BACKSHELL SHR BOOT ADAPTR STRT OD CAD SIZE 20 (Alt: M85049/62-20W) RoHS : Not Compliant | 0 | |||
| MAL215296223E3 | Vishay Intertechnologies | 22uF 400V 16x20 105C 4000h - Tape and Reel (Alt: MAL215296223E3) RoHS : Compliant | 0 | |||
| MAL214896226E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 2200 uF 25 V 20 3000 hours 105C Radial Leaded (Alt: MAL214896226E3) RoHS : Compliant | 0 | |||
| MAL215296225E3 | Vishay Intertechnologies | 22uF 400V 16x20 105C 4000h (Alt: MAL215296225E3) RoHS : Compliant | 0 | |||
| MAL219622104E3 | Vishay Intertechnologies | Supercapacitor 01 F 55 V Radial Leaded 20 80 5 mm 1000 hours 85C Coin Through Hole (Alt: MAL219622104E3) RoHS : Compliant | 0 | |||
| MAL219622474E3 | Vishay Intertechnologies | Supercapacitor 047 F 55 V Radial Leaded 20 80 5 mm 1000 hours 85C Coin (Alt: MAL219622474E3) RoHS : Compliant | 0 | |||
| 1SNA179622R0200 | TE Connectivity | BJM12 (Alt: 1SNA179622R0200) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10127396-22H1410LF | Amphenol Corporation | FCI10127396-22H1410LF CONN PW CARD EDGE, (Alt: 10127396-22H1410LF) RoHS : Compliant | 0 | ||
| 5787962-2 | TE Connectivity | (Alt: 5787962-2) RoHS : Compliant |
| 0 | ||
| B39622B8388L210 | Qualcomm RFFE Filter Products | 6.2 GHZ WI-FI 6E UNII 5 (Alt: B39622B8388L210) RoHS : Compliant | 0 | |||
| B59622A0090A062 | TDK Corporation | (Alt: B59622A0090A062) RoHS : Compliant | 0 | |||
| B39212B9622P810 | Qualcomm RFFE Filter Products | (Alt: B39212B9622P810) RoHS : Compliant | 0 | |||
| 2396221-1 | TE Connectivity | BSE210-A0305021621=SOCKET MODULE ASSY (Alt: 2396221-1) RoHS : Compliant | 0 | |||
| 2011962261 | Molex | (Alt: 2011962261) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LE9622RQC | Microchip Technology Inc | Subscriber Line Interface Circuit SLIC 2Channel 120V Shared Battery 45mA Tray (Alt: LE9622RQC) RoHS : Compliant | 0 | ||
| LE9622RQCT | Microchip Technology Inc | Subscriber Line Interface Circuit SLIC 2Channel 120V Shared Battery 45mA TR (Alt: LE9622RQCT) RoHS : Compliant | 0 | |||
| B39212B9622P810 | Qualcomm RFFE Filter Products | (Alt: B39212B9622P810) RoHS : Compliant | 0 | |||
| PI4IOE5V96224ZLEX | Diodes Incorporated | (Alt: PI4IOE5V96224ZLEX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2222-581-96225 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,900 | |
| 496-096-221-312 | EDAC Inc | IN STOCK SHIP TODAY |
| 100 | ||
| C15962-25.000 | Crystek Corporation | IN STOCK SHIP TODAY | 18 | |||
| 1696222 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| PM2-02-2962-2-LL | Vicor Power | IN STOCK SHIP TODAY |
| 1 | ||
| 0221-19622 | Hub City | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | SPL49622 | Spiralock | 7/16-14 SPL Hi Limit PD Gage Standard Gage |
| 1 | |
| SPL59622 | Spiralock | M12X1.75 SPL Hi Limit PD Gage |
| 1 | ||
| 9622 | Heyco | SMP R-1250 BLACK | 0 | |||
| 799622 | Essentra Components | LEAF HINGE | 0 | |||
| E5-9-622-510-10 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 499622M | Essentra Components | HINGE, SURFACE MOUNT - 106X60M | 0 | |||
| 3BT-P9622-00 | Acumnet / Camcar | 0 | ||||
| E5-9-622-TL0-13 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-9-622-TL0-10 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 1599622 | Essentra Components | HINGE, SURFACE MOUNT, 135X60MM | 0 | |||
| 4599622 | Essentra Components | LEAF HINGE 214X80 | 0 | |||
| E5-9-622-TR0-13 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-9-622-520-13 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-9-622-TR0-10 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-9-622-520-10 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
![]() EBV Elektronik | LE9622RQC | Microchip Technology Inc | Subscriber Line Interface Circuit SLIC 2Channel 120V Shared Battery 45mA Tray (Alt: LE9622RQC) RoHS : Compliant | 0 | ||
| LE9622RQCT | Microchip Technology Inc | Subscriber Line Interface Circuit SLIC 2Channel 120V Shared Battery 45mA TR (Alt: LE9622RQCT) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M85049/62-20N | Amphenol PCD | Connector Acc |
| 474 | |
| M85049/62-20W | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/62-20W | SPI Connects | Connector Acc | 0 | |||
| M85049/62-20WD | SPI Connects | Backshells & Ac | 0 | |||
| M85049/62-20WD | Glenair Inc | Backshells & Ac RoHS : Unknown | 0 | |||
| M85049/62-20WD | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M10-526396-229 | Amphenol Aerospace | Connector 38999 | 0 | |||
| M85049/96-22-A | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| M85049/62-22WD | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/62-22WD | SPI Connects | Backshells & Ac | 0 | |||
| M85049/62-22WD | Glenair Inc | Backshells & Ac | 0 | |||
| M85049/62-20N | SPI Connects | Backshells & Ac | 0 | |||
| M85049/62-20N | Glenair Inc | Connector Acc | 0 | |||
| M85049/62-24WD | Glenair Inc | Backshells & Ac RoHS : Unknown | 0 | |||
| M85049/62-24WD | Amphenol PCD | Backshells & Ac |
| 0 | ||
![]() Flip Electronics | PCA9622DR,118![]() | NXP Semiconductors | Stock RoHS : Compliant | 20,000 | ||
![]() Maritex | 5787962-2 | TE Connectivity | D-Sub Connectors; 5787962-2; TE CONNECTIVITY; 42.7 mm; Yes; Surface Mount RoHS : Compliant |
| 109 | |
![]() Master Electronics | B51-007-3196220 | ITT Interconnect Solutions | RF Connectors RoHS : Compliant |
| 51 | |
| 1-455962-2 | TE Connectivity | INSERT ANVIL RoHS : Not Compliant |
| 0 | ||
| 3-994962-2 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-096-228 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-096-226 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 5-2151962-2 | TE Connectivity | OCEAN-2.0-APPLICATOR-S-080F125OA RoHS : Compliant |
| 0 | ||
| 985962-2 | TE Connectivity | FILTER COALESCING RoHS : Not Compliant |
| 0 | ||
| FW-02-03-F-D-096-228 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-096-222 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 39-29-6228 | Molex | Conn Power HDR 22 POS 4.2mm Solder ST Thru-Hole 22 Terminal 1 Port Mini-Fit Jr™ Bag RoHS : Compliant |
| 0 | ||
| D96223-000 | TE Connectivity | MTCPQKT2R22PGBB MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1419622 | Phoenix Contact | Profile gasket - type: D7 - for pin inserts RoHS : Compliant |
| 0 | ||
| G-962-2-HD | Thomas & Betts | Hanger - Channel - Hanger Size 1/4 Inch and 3/8 Inch Rod - Hot-Dip Galvanized Steel - For use with 1-1/2 Inch or 1-7/8 Inch Deep Channel. RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-096-227 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-096-226 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE9622 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 75 Ohm, Frequency, Min: DC, Frequency, Max: 1 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. 75 Ohm TNC Female to 75 Ohm TNC Female Adapter. TNC adapter PE9622 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our TNC to TNC adapter is a in-series coaxial adapter design. This 75 Ohm TNC adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 1 GHz. TNC female to TNC female adapter is one of the many RF components that ship same day as they are ordered. PE9622 female TNC to female TNC adapter has a straight body. This Pasternack straight TNC coax adapter is a in-line RF adapter. Our female TNC to female TNC adapter PE9622 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This TNC to TNC radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 2,426 | |
| PE38962-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG180B/U, RF Cable Type: RG180, RF Cable Impedance: 95 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Cable 24 Inch Length Using 95 Ohm RG180 Coax., Radio frequency assembly TNC male to TNC male cable 24 inch length using 95 Ohm RG180 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 24 inch length using 95 Ohm RG180 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assembly has male gender on end 1 and male on end 2. PE38962-24 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. TNC plug to TNC plug cable assembly PE38962-24 is built with RG180 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38962-24 RF cable are available on our downloadable PDF datasheet. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 134 | ||
| PE3C4962-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On BMA Jack to TNC Male Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly snap-on BMA jack to TNC male cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to TNC male cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to TNC cable is a jack to male coax assembly, PE3C4962-24, can also be known as a BMA female to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to TNC plug cable assembly PE3C4962-24 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BMA jack to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4962-24 can also be used in the other direction and will be TNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to TNC male cable 24 inch length using RG400 coax. |
| 97 | ||
| PE3W05962-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female Bulkhead to SMA Male Right Angle Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA female bulkhead to SMA male right angle cable 24 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA male right angle cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W05962-24, can also be known as a SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W05962-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05962-24 can also be used in the other direction and will be right angle SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA male right angle cable 24 inch length using LMR-195 coax. |
| 72 | ||
| PE3C9622-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-36 can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-36 can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9622-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-200CM can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-200CM can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7962-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 7/16 DIN Male to 7/16 DIN Female 4 Hole Flange Low PIM Cable 200 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN 4 hole flange cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C7962-200CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C7962-200CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7962-200CM can also be used in the other direction and will be 7/16 DIN female 4 hole flange to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3W09622LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400 Coax, LF Solder. PE3W09622LF is a N male to N male cable using LMR-400 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09622LF N male to N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C9622-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-100CM can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-100CM can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7962-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Female 4 Hole Flange Low PIM Cable 24 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN female 4 hole flange low PIM cable 24 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female 4 hole flange low PIM cable 24 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN 4 hole flange cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C7962-24, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C7962-24 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7962-24 can also be used in the other direction and will be 7/16 DIN female 4 hole flange to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female 4 hole flange low PIM cable 24 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C9622 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622 can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622 can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3962-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B405, RF Cable Type: PE-B405, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Right Angle Cable 24 Inch Length Using PE-B405 Coax., Radio frequency assembly N male to N male right angle cable 24 inch length using PE-B405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 24 inch length using PE-B405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3962-24, can also be known as a N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3962-24 is built with PE-B405 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3962-24 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 24 inch length using PE-B405 coax. |
| 0 | ||
| PE3C9622-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-24 can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-24 can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9622-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-48 can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-48 can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W19622/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 20KV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 20KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 20KV Male to 20KV Male Cable Using RG214 Coax with HeatShrink. PE3W19622/HS is a 20KV male to 20KV male cable using RG214 coax. This Pasternack 20KV male to 20KV male cable assembly uses a 50 Ohm 20KV for connector 1 and a 50 Ohm 20KV for connector 2. Our male 20KV to male 20KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19622/HS 20KV male to 20KV male cable assembly is constructed with RG214 coax. | 0 | |||
![]() TE Connectivity | 928962-2 | TE Connectivity | FF 250 TAB 1.0-2.5MM2 TBR Quick Disconnect Terminal Type: Tab Insulation Option: Uninsulated Wire Size: 17 – 13 AWG Wire Size: 1.03 – 2.62 mm² Mating Tab Width: 6.35 mm Tab Uninsulated 17 – 13 AWG 1.03 – 2.62 mm² | Quick Disconnect | Part Number: 928962-2 | Internal Number: 928962-2 | TE Connectivity RoHS : Compliant |
| 13,845 | |
| T2050962201-007 | TE Connectivity | HEEE-048-F 49-96 Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 48 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 48 26 – 12 AWG | Hdc Heee Insert Series & Rail Compliant | Part Number: T2050962201-007 | Internal Number: T2050962201-007 | TE Connectivity RoHS : Compliant |
| 60 | ||
![]() Vyrian | MAL219622104E3 | Vishay Intertechnologies | Electric Double Layer Capacitor, Electric Double Layer, 5.5V, 80% +Tol, 20% -Tol, 100000uF, Through Hole Mount RoHS : Compliant | 13,595 | ||
| T2050962201-000 | TE Connectivity | Rectangular Connector, 48 Contact(s), Female RoHS : Compliant | 11,791 | |||
| MAX9622AXK | Analog Devices (Maxim Integrated) | 9,947 | ||||
| STM1679622 | Analog Devices Inc | Digital to Synchro or Resolver, PSMA14 | 9,741 | |||
| XC5C-9622 | OMRON Corporation | Board Euro Connector, 96 Contact(s), 3 Row(s), Male, Right Angle, Solder Terminal, Plug RoHS : Compliant | 9,657 | |||
| PMP9622 | Texas Instruments | 7,731 | ||||
BQ296229DSGT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 4 Channel, +4.6V, PDSO8 RoHS : Compliant | 6,803 | |||
AD9622SQ![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 12000uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 6,597 | |||
BQ296221DSGT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, +4.55V, PDSO8 RoHS : Compliant | 5,627 | |||
| 39-29-6228 | Molex | Rectangular Power Connector, 22 Contact(s), Male, Solder Terminal, Plug RoHS : Compliant | 5,122 | |||
BQ296226DSGT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, +4.5V, PDSO8 RoHS : Compliant | 4,019 | |||
BQ296228DSGT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, +4.55V, PDSO8 RoHS : Compliant | 3,317 | |||
EPM7256EW5962208-15![]() | Altera Corporation | EE PLD, 15ns, CMOS, CQFP208 | 3,304 | |||
| EPM5032DM5962-25 | Intel / Altera | UV PLD, 25ns, CMOS, CDIP28 | 2,608 | |||
EPM7256EW5962208-20![]() | Altera Corporation | EE PLD, 20ns, CMOS, CQFP208 | 1,611 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |