| Electronic Components Datasheet Search |
|
9618 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | M85049/61-8 | Glenair Inc | - Bulk (Alt: M85049/61-8) RoHS : Not Compliant |
| 0 | |
| 340MS026ZRS09-618-4 | Glenair Inc | - Bulk (Alt: 340MS026ZRS09-618-4) RoHS : Not Compliant |
| 0 | ||
| 3-2296184-3 | TE Connectivity | Connector Unsealed Plug 3 Position 2mm Crimp Straight Cable Mount Tube - Rail/Tube (Alt: 3-2296184-3) RoHS : Not Compliant |
| 0 | ||
| 10-457996-187 | Amphenol Corporation | - Bulk (Alt: 10-457996-187) RoHS : Not Compliant |
| 0 | ||
| MAL225961829E3 | Vishay Intertechnologies | - Boxed Product (Development Kits) (Alt: MAL225961829E3) RoHS : Compliant |
| 0 | ||
| 229596-1804 | Molex | Wire-wound Metal Power Inductors 2.2 uH 20 % -40 to +125? 2.0x2.0 1.2mm-Medical - Bulk (Alt: 2295961804) RoHS : Compliant |
| 0 | ||
| 10-457996-188 | Amphenol Corporation | - Bulk (Alt: 10-457996-188) RoHS : Not Compliant |
| 0 | ||
| ECS-112.896-18-18-TR | ECS International Inc | - Tape and Reel (Alt: ECS-112.896-18-18-TR) RoHS : Compliant |
| 0 | ||
| LS-9618 | TE Connectivity | - Bag (Alt: 6-1617090-6) RoHS : Not Compliant |
| 0 | ||
| 1900950961829PJ | Radiall | TESTPRO3 LP SMA2.9 SP SMA2.9 SJ 1,829M - Bulk (Alt: 1900950961829PJ) RoHS : Not Compliant |
| 0 | ||
| 3-1633961-8 | TE Connectivity | - Bag (Alt: 3-1633961-8) RoHS : Not Compliant |
| 0 | ||
| 39-29-6188 | Molex | - Bulk (Alt: 0039296188) RoHS : Compliant |
| 0 | ||
| 046809618210846+ | Kyocera AVX Components | - Tape and Reel (Alt: 046809618210846+) RoHS : Compliant |
| 0 | ||
| 51296-1894 | Molex | - Tape and Reel (Alt: 0512961894) RoHS : Compliant |
| 0 | ||
| 10-457996-185 | Amphenol Corporation | - Bulk (Alt: 10-457996-185) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 51296-1894 | Molex | Conn, Ffc/Fpc, R/A, 18Pos, 1Row, 0.5Mm; |Molex 51296-1894 RoHS : Compliant |
| 6,000 | |
| MAX9618AXA+T | Analog Devices Inc | Op-Amp, 1.5Mhz, 0.7V/Us, Sc-70-8; |Analog Devices, Inc. MAX9618AXA+T RoHS : Compliant |
| 5,668 | ||
| MAX9618AXA+T | Analog Devices Inc | Op-Amp, 1.5Mhz, 0.7V/Us, Sc-70-8; |Analog Devices, Inc. MAX9618AXA+T RoHS : Compliant |
| 5,668 | ||
| 51296-1894 | Molex | Conn, Ffc/Fpc, R/A, 18Pos, 1Row, 0.5Mm; |Molex 51296-1894 RoHS : Compliant |
| 2,948 | ||
| 9618 060500 | Belden Inc | Multiconductor Cable, Shielded; |Belden 9618 060500 RoHS : Compliant |
| 1,000 | ||
| 9618 0601000 | Belden Inc | Multiconductor Cable, Shielded; |Belden 9618 0601000 RoHS : Compliant |
| 1,000 | ||
| 9618 060100 | Belden Inc | Shld Multicond Cable 37Cond 24Awg 100Ft; |Belden 9618 060100 RoHS : Compliant |
| 600 | ||
| LFSPXO009618 | IQD Frequency Products | Crystal Oscillator, Smd, 125Mhz; |Iqd Frequency Products LFSPXO009618 RoHS : Compliant |
| 502 | ||
| 229596-1802 | Molex | Cbl Assy, Mini-Fit Bmi Recpt-Recpt/150Mm; |Molex 229596-1802 RoHS : Compliant |
| 136 | ||
| 229596-1804 | Molex | Cbl Assy, Mini-Fit Bmi Recpt-Recpt/500Mm; |Molex 229596-1804 RoHS : Compliant |
| 102 | ||
| MAL225961829E3 | Vishay Intertechnologies | Cap, Alu Elec, 82Uf, 600V, Snap-In; |Vishay MAL225961829E3 RoHS : Compliant |
| 100 | ||
| MP009618 | SPC Multicomp | Heavy Duty Insert, 5+Pe, Rcpt, 16A/Sz 3A; |Multicomp Pro MP009618 RoHS : Compliant |
| 53 | ||
| 89618 | GEARWRENCH | Adaptor Ratchet Head 3/8" Drive 9Mm X 12Mm; |Gearwrench 89618 RoHS : Not Compliant |
| 45 | ||
| 1696183 | Phoenix Contact | Splitter, M8 4Pos Plug - 2X M8 3Pos Skt; |Phoenix Contact 1696183 RoHS : Compliant |
| 11 | ||
| FMHR0096-18 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 18", 457.2Mm, Rg316; |Fairview Microwave FMHR0096-18 RoHS : Not Compliant |
| 2 | ||
![]() RS | 1696183 (SAC-3P-M 8Y/2XM 8FS) | Phoenix Contact | SPLITTER, Y TYPE, M12/M8, STRAIGHT, MALE/FEMALE/FEMALE, PLUSCON SERIES |
| 21 | |
| 796188-1 | TE Connectivity | CONNECTOR HOUSING CPC PLUG ASSY 24 POS. SZ. 23 SERIES 1 FREE HANG STD SEX RoHS : Compliant |
| 18 | ||
| 4349618 | RS Pro | STAINLESS STEEL STRAP HINGE FREE SWINGING 5.7 X 1.14 X 0.06IN (145X29X1.5MM) |
| 5 | ||
| 66252809618 | Norton Winter | GEMINI NON-REINF PORTABLE SNAGGING WHEEL >3IN. 57A16-Q T11, 6 X 2 X 5/8 IN. |
| 5 | ||
| 7239618 | RS Pro | WHITE PANEL MOUNT INDICATOR, 110V AC, 8MM MOUNTING HOLE SIZE, LEAD WIRES, IP67 |
| 4 | ||
| 1619618 (CA-12F2N8A8503) | Phoenix Contact | CABLE CONNECTOR;12-POSITION;STRAIGHT LOCKING M23;CA-12F2N8A8503 |
| 2 | ||
| 296185 | RS Pro | MAIN EXTENSION LEAD HO7RNF 1 |
| 1 | ||
| 9618 | Heyco | HOLE PLUG, EVA/LDPE, BLACK, HOLE SIZE 0.9900-1.0200 IN, SMP SERIES |
| 0 | ||
| 096.188-DE | Bimba Manufacturing Company | CYLINDER, O.L., CARBON STEEL ROD; 1-1/16IN BORE; STROKE: 6.188IN; DBL ACT/FN MT |
| 0 | ||
| 0029618 (0029618/164) | Lapp Group | OLFLEX F1 ROBOTIC CABLE, 18AWG/18C, POLYURETHANE, BLACK |
| 0 | ||
| 11139618 (11139618 CX100) | Lapp Group | UNITRONIC FD CP PLUS A 3X0,34 |
| 0 | ||
| 11139618 (11139618 CX500) | Lapp Group | UNITRONIC FD CP PLUS A 3X0,34 |
| 0 | ||
| 11139618 (11139618 CX1000) | Lapp Group | UNITRONIC FD CP PLUS A 3X0,34 |
| 0 | ||
| 1SNA399618R1300 (039961813) | TE Connectivity | D35/16.N.2L, ENTRELEC |
| 0 | ||
| 1SNA179618R1600 (017961816) | TE Connectivity | BJM12 2 POLES, ENTRELEC |
| 0 | ||
![]() Future Electronics | 9618 | Heyco | RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 30-9618 | GC Electronics | Conn Modular Coupler M/F 2/4 POS ST RoHS : Compliant |
| 355 | |
| LS-9618 | TE Connectivity | General Purpose Relays LS-9618 = LS LATCHING RELAY |
| 3 | ||
| 9618 | Heyco | SMP R-1000 BLACK RoHS : Compliant |
| 0 | ||
| 9618-245 | Woodhead Molex | 15F/22F-Main Spring RoHS : Compliant |
| 0 | ||
| 63800-9618 | Molex | WIRE STOP RoHS : Compliant |
| 0 | ||
| 9618-060100 | Belden Inc | Cable; 37 cond; 24AWG; Strand (7X32); Foil+braid shielded; Chrome jkt; 100 ft. RoHS : Compliant |
| 0 | ||
| 9618-060500 | Belden Inc | Cable; 37 cond; 24AWG; Strand (7X32); Foil+braid shielded; Chrome jkt; 500 ft. RoHS : Compliant |
| 0 | ||
| 9618-0601000 | Belden Inc | Cable; 37 cond; 24AWG; Strand (7X32); Foil+braid shielded; Chrome jkt; 1000 ft. RoHS : Compliant |
| 0 | ||
| 060-9618-06 | Honeywell Test and Measurement | MODEL 73, 4,000 LBS RoHS : Compliant |
| 0 | ||
| 9618-CHR-100 | Belden Inc | Cable; 37 cond; 24AWG; Strand (7X32); Foil+braid shielded; Chrome jkt; 100 ft. RoHS : Compliant |
| 0 | ||
| 9618-CHR-500 | Belden Inc | Cable; 37 cond; 24AWG; Strand (7X32); Foil+braid shielded; Chrome jkt; 500 ft. RoHS : Compliant |
| 0 | ||
| 9618-CHR-1000 | Belden Inc | Cable; 37 cond; 24AWG; Strand (7X32); Foil+braid shielded; Chrome jkt; 1000 ft. RoHS : Compliant |
| 0 | ||
| 09-9618-100-05 | Franz Binder GmbH & Co | M9 IP67 Lead-through for control cabinet, Contacts: 5, shieldable, pluggable, IP67 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD9618JR-REEL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 2200uV Offset-Max, PDSO8 RoHS : Not Compliant |
| 2,500 | |
| MAX9618AXA+T | Analog Devices Inc | Op Amp Zero Drift/Chopper 1.5MHz 8-SOP T/R RoHS : Compliant |
| 174 | ||
AD9618JR![]() | Analog Devices Inc | Op Amp Current Feedback 150MHz 8-SOIC Tube RoHS : Not Compliant |
| 3,379 | ||
TPS79618DCQR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 1A SOT-223-6 T/R RoHS : Compliant |
| 5,591 | ||
TPS79618KTTT![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, BICMOS, PSSO5 ' RoHS : Compliant |
| 49,627 | ||
TPS79618DCQRG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.22V Dropout, BICMOS, PDSO6 RoHS : Compliant |
| 20,000 | ||
TPS79618DCQ![]() | Texas Instruments | TPS796 Ultralow-Noise, High PSRR, Fast, RF, 1-A Low-Dropout Linear Regulators RoHS : Compliant |
| 23,681 | ||
TPS79618KTTR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 1A TO-263-6 T/R RoHS : Compliant |
| 21,810 | ||
![]() Sager | 2063961-8 | TE Connectivity | Bench Top Tools FEED, FINGER | 0 | ||
| 1569618 | Phoenix Contact | Circular Metric Connectors SACC-DSI-MSB-4CON L180 SCO RoHS : Compliant |
| 0 | ||
| 596180-000 | TE Connectivity | Hook-up Wire 22759/32-12-6 RoHS : Compliant |
| 0 | ||
| 0349618384 | Molex | Automotive Connectors MINI50 RAHDR 38CKT GRAY POL B T&R | 0 | |||
| 3-2296184-3 | TE Connectivity | Rectangular MIL Spec Connectors RITS CONN. PLUG ASSY 3P ORANGE TIN COVER RoHS : Compliant |
| 0 | ||
| AAA9618-00 | TE Connectivity | TE Connectivity 91F1-12-14-1-ZB-HE300 | 0 | |||
| MA1-X-00-961-8-A16-2-T | Carling Technologies | Circuit Breakers | 0 | |||
| 3-1633961-8 | TE Connectivity | Crimpers / Crimping Tools CRIMPER INSULATION F PREMIUM RoHS : Compliant |
| 0 | ||
| 2295961802 | Molex | MINI-FIT BMI8CKT R-R 24AWG 150MM |
| 0 | ||
| 2896186 | Phoenix Contact | Enclosures for Industrial Automation 17.6MM COVER CAP 11.1MM DEPTH RoHS : Compliant |
| 0 | ||
| 1789618 | Phoenix Contact | Fixed Terminal Blocks FFKDSA1/V-2.54-2 2P 120V 4A 2.54MM RoHS : Compliant |
| 0 | ||
| 7-1633961-8 | TE Connectivity | Crimpers / Crimping Tools CRIMPER INSULATION F PREMIUM RoHS : Compliant |
| 0 | ||
| 686961-8 | TE Connectivity | Other Tools M HBEMPO T | 0 | |||
| D96187-000 | TE Connectivity | Hook-up Wire 55PC1112-18-9-94 RoHS : Compliant |
| 0 | ||
| M55629/6-182 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 0 | |||
![]() TME | 89618-4379 | Molex | 89618-4379 |
| 17,500 | |
| 1196180000 | Weidmüller Interface GmbH & Co. KG | Enclosure: multipurpose; 200mm; stainless steel; stainless steel RoHS : Compliant |
| 2 | ||
| 796188-1 | TE Connectivity | Connector: circular; socket,plug; female; PIN: 24; crimped; 600V RoHS : Compliant |
| 2 | ||
| 1-1879618-2 | TE Connectivity | Resistor: thin film; 390kΩ; THT; 250mW; ±1%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 0 | ||
| 1219618 | Bossard Group | Screw; M2,5; M2.5x12; 0.45; Head: button; Phillips,slotted; steel |
| 0 | ||
| 1-1879618-0 | TE Connectivity | Resistor: thin film; 330kΩ; THT; 250mW; ±1%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 0 | ||
| 10049618 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 8; SMT; 3A; 250V |
| 0 | ||
| 196.188 | Pneumatic Components Limited (PCL) | Stop valve; -0.95÷15bar; nickel plated brass,PBT; Thread: G 1/8" |
| 0 | ||
| 7789618040 | Weidmüller Interface GmbH & Co. KG | PAC RoHS : Compliant |
| 0 | ||
| 99618 | HELUKABEL | Protective tube; Size: 50; polyamide; grey; HELUcond PA6-L |
| 0 | ||
| 196.184 | Pneumatic Components Limited (PCL) | Stop valve; -0.95÷15bar; nickel plated brass,PBT; Thread: G 1/8" |
| 0 | ||
| 1961880000 | Weidmüller Interface GmbH & Co. KG | Orange; AP; polyamide; W: 5mm; L: 84mm; Accessories: end piece |
| 0 | ||
| 7000-44541-7961800 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male angled,M12 male straight |
| 0 | ||
| GW96186 | Gewiss SpA | Switch-disconnector; Poles: 2; for DIN rail mounting; 25A; IP20 |
| 0 | ||
| UA-HEXA-96-18 | GTV Poland | Holder; aluminium; brass; H: 17mm; L: 150mm; W: 40mm; HEXA |
| 0 | ||
![]() Ameya Holding Limited | MAX9618AXA+T | Analog Devices Inc | High-Efficiency, 1.5MHz Op Amps with RRIO RoHS : Compliant | 2,307 | ||
![]() Interstate Connecting Components | 9618 | Heyco |
| 218 | ||
| 39-29-6188 | Molex | A-5566-18AGS-210 18CKT. RoHS : Compliant |
| 161 | ||
| 1879618-3 | TE Connectivity | H8 160K 1% 15PPM RoHS : Compliant |
| 0 | ||
| 10-596180-013 | Amphenol Aerospace | 0 | ||||
| 10-109618-04L | Amphenol Industrial Operations | PLUG | 0 | |||
| 340MS026ZRS09-618-4 | Glenair Inc | MM SHORTING CAP B/S SZ 9 |
| 0 | ||
| 3-2296184-3 | TE Connectivity | RITS CONN. PLUG ASSY 3P ORANGE RoHS : Compliant |
| 0 | ||
| 10-596183-012 | Amphenol Aerospace | 0 | ||||
| 1-1879618-4 | TE Connectivity | H8 470K 1% 15PPM RoHS : Compliant |
| 0 | ||
| M85049/61-8 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| 3-1633961-8 | TE Connectivity | CRIMPER, INSULATION F PREMIUM RoHS : Compliant |
| 0 | ||
| 7-1633961-8 | TE Connectivity | CRIMPER, INSULATION F PREMIUM RoHS : Compliant |
| 0 | ||
| 10-109618-01P | Amphenol Industrial Operations | PLUG | 0 | |||
| 1-1879618-3 | TE Connectivity | H8 430K 1% 15PPM RoHS : Compliant |
| 0 | ||
| D96187-000 | TE Connectivity | 55PC1112-18-9-94 RoHS : Compliant | 0 | |||
![]() PEI Genesis | M38999/6-18B07 | SOURIAU-SUNBANK |
| 0 | ||
| M38999/6-18F05B | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18B07A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/61-8 | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18B05A | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18F04A | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18F03 | SOURIAU-SUNBANK |
| 0 | |||
| J596-1812-C-34 | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18F07 | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18B07B | SOURIAU-SUNBANK |
| 0 | |||
| 5617896-182 | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18B05 | SOURIAU-SUNBANK |
| 0 | |||
| M38999/6-18F06A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/6-18S | SOURIAU-SUNBANK |
| 0 | |||
| M85049/96-18 | Abbotec Incorporated |
| 0 | |||
![]() PUI | 12.89618 | 2,800 | ||||
![]() Chip 1 Exchange | 12.89618 | Geyer Electronic E K | INSTOCK | 2,800 | ||
TPS79618DCQ![]() | Texas Instruments | INSTOCK RoHS : Compliant | 468 | |||
| 120-96186-ES00 | Murata Manufacturing Co Ltd | INSTOCK | 60 | |||
![]() Avnet Abacus | 9-1241961-8 | TE Connectivity | (Alt: 9-1241961-8) RoHS : Compliant | 60,000 | ||
| 2199618 | Phoenix Contact | Coding Section for ME Modular DINRail Housings Red (Alt: 2199618) RoHS : Compliant | 2,000 | |||
| PE-96186NL | Pulse Electronics Corporation | Choke Common Mode 27 mH 63 A (Alt: PE-96186NL) RoHS : Compliant | 405 | |||
| 2896186 | Phoenix Contact | BC 176 BS U11 KMGY BC176BSU11KMGY (Alt: 2896186) RoHS : Compliant | 0 | |||
| 1789618 | Phoenix Contact | FFKDSA1V254 2 FFKDSA1V2542 (Alt: 1789618) RoHS : Compliant | 0 | |||
| 39296188 | Molex | Conn Shrouded Header 18 POS 42mm Solder ST Through Hole (Alt: 39296188) RoHS : Compliant | 0 | |||
| 39296188 | Molex | Conn Shrouded Header 18 POS 42mm Solder ST Through Hole (Alt: 39296188) RoHS : Compliant | 0 | |||
| 349618342 | Molex | - Tape and Reel (Alt: 349618342) RoHS : Compliant | 0 | |||
| 2295961802 | Molex | MiniFit BMI8Ckt RR 24AWG 150mm (Alt: 2295961802) RoHS : Compliant | 0 | |||
| 1961880000 | Weidmüller Interface GmbH & Co. KG | WDM1961880000 (Alt: 1961880000) RoHS : Compliant | 0 | |||
| 1896180000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1896180000) RoHS : Compliant | 0 | |||
| 5-103961-8 | TE Connectivity | Conn IDC Connector RCP 9 POS 254mm IDT ST Cable Mount Strip (Alt: 5-103961-8) RoHS : Compliant | 0 | |||
| 3-1633961-8 | TE Connectivity | (Alt: 3-1633961-8) RoHS : Compliant | 0 | |||
| 7-1633961-8 | TE Connectivity | (Alt: 7-1633961-8) RoHS : Compliant | 0 | |||
| M20-9961846 | Harwin | 254mm 01 Pitch SIL Horizontal PC Tail Pin Header 61mm mating pin height tin 18 contacts (Alt: M20-9961846) RoHS : Compliant | 0 | |||
![]() Avnet Asia | CTX01-19618-R | Eaton Corporation | (Alt: CTX01-19618-R) RoHS : Compliant | 0 | ||
| 0349618386 | Molex | (Alt: 0349618386) RoHS : Compliant | 0 | |||
| IS61NVVP409618B-200TQLI | Integrated Silicon Solution Inc | ISNIS61NVVP409618B-200TQLI HIGH-SPEED,LO (Alt: IS61NVVP409618B-200TQLI) RoHS : Compliant | 0 | |||
| ZH-796180-000 | Amphenol Corporation | PLUG CONNECTOR (Alt: ZH-796180-000) RoHS : Compliant | 0 | |||
| 0349618343 | Molex | PCB Receptacle, 34 Contacts, 3 Rows, 2mm, Tin, 16A, Female Receptacle, THT, Right Angle, Brass (Alt: 0349618343) RoHS : Compliant | 0 | |||
| 0349618344 | Molex | (Alt: 0349618344) RoHS : Compliant | 0 | |||
| 0349618345 | Molex | (Alt: 0349618345) RoHS : Compliant | 0 | |||
| 1-1600961-8 | TE Connectivity | (Alt: 1-1600961-8) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 5962F9961802VEC | Renesas Electronics Corporation | (Alt: HS1-201HSEH-Q) RoHS : Compliant | 0 | ||
| 5962F9961801QXC | Renesas Electronics Corporation | (Alt: HS9-201HSRH-8) RoHS : Compliant | 0 | |||
| 5962F9961801VXC | Renesas Electronics Corporation | (Alt: HS9-201HSRH-Q) RoHS : Compliant | 0 | |||
| 5962F9961801VEC | Renesas Electronics Corporation | (Alt: HS1-201HSRH-Q) RoHS : Compliant | 0 | |||
| 5962F9961802VXC | Renesas Electronics Corporation | (Alt: HS9-201HSEH-Q) RoHS : Compliant | 0 | |||
| 5962F9961801QXCS2793 | Renesas Electronics Corporation | SMD100RADIATION HARDENED SPST SWITCH CLASS Q (Alt: HS9-201HSRH-8S2793) RoHS : Compliant | 0 | |||
| 5962F9961802VXCS2793 | Renesas Electronics Corporation | RADIATION HARDENED SPST SWITCH HDRLDR CLASS V FP (Alt: 5962F9961802VXCS2793) RoHS : Compliant | 0 | |||
| 5962F9961801VXCS2793 | Renesas Electronics Corporation | Radiation Hardened High Speed Quad Spst CMOS Analog Switch 5962F9961801VXC (Alt: HS9-201HSRH-QS2793) RoHS : Compliant | 0 | |||
IS61VVF409618B-7.5TQL![]() | Integrated Silicon Solution Inc | SRAM Chip Sync Single 18V 72MBit 4M x 18 75ns 100Pin TQFP (Alt: IS61VVF409618B-7.5TQL) RoHS : Compliant | 0 | |||
| C19618_DALINE-10-SHD2-MATT | LEDIL | Shade for LinLED DALINE10 G1 XQE HI LUXEON 2835 Line LM28xB Series SEOUL DC 3030C LEDs Box (Alt: C19618_DALINE-10-SHD2-MATT) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 796188-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | |
| A-4.096-18 | Raltron Electronics Corporation | IN STOCK SHIP TODAY |
| 64 | ||
TPS79618DCQ![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 31 | ||
| 1696183 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
![]() EBV Elektronik | C19618_DALINE-10-SHD2-MATT | LEDIL | Shade for LinLED DALINE10 G1 XQE HI LUXEON 2835 Line LM28xB Series SEOUL DC 3030C LEDs Box (Alt: C19618_DALINE-10-SHD2-MATT) RoHS : Compliant | 0 | ||
![]() Master Electronics | 1569618 | Phoenix Contact | Sensor/actuator flush-type plug - 4-pos. - M12 SPEEDCON - B-coded - rear/screw mounting with Pg9 thread - with straight solder connection RoHS : Compliant |
| 0 | |
| 1879618-3 | TE Connectivity | H8 160K 1% 15PPM RoHS : Compliant |
| 0 | ||
| 596180-000 | TE Connectivity | 22759/32-12-6 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 019618-0002 | ITT Interconnect Solutions | DDH50P002; Hermetics; Hermetics RoHS : Compliant |
| 0 | ||
| RCV-00109618 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-096-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-096-183 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 3-2296184-3 | TE Connectivity | RITS CONN. PLUG ASSY 3P ORANGE TIN COVER MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1879618-4 | TE Connectivity | H8 470K 1% 15PPM RoHS : Compliant |
| 0 | ||
| 000196180 | ITT Interconnect Solutions | Veam Cir Vbn Other |Itt Cannon CIR06A-14S-9S-F80-T12 RoHS : Not Compliant |
| 0 | ||
| FW-02-03-F-D-096-187 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-096-184 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 89618-4340 | Molex | The 89618-4340 is a straight FAKRA II plug sub-assembly designed for use with RG316 and RG174 coaxial cables. RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-096-183 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-096-186 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE39496-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 18 inches. TNC Male to TNC Female Semi-Flexible Precision Cable 18 Inch Length Using PE-SR402FLJ Coax, LF Solder, RoHS., Radio frequency assembly TNC male to TNC female semi-flexible precision cable 18 inch length using PE-SR402FLJ coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC female semi-flexible precision cable 18 inch length using PE-SR402FLJ coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our precision TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. This TNC to TNC cable is a male to female coax assembly, PE39496-18, can also be known as a precision TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE39496-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39496-18 can also be used in the other direction and will be TNC female to TNC male cable assembly if the opposite connectivity is required. Precision TNC plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female semi-flexible precision cable 18 inch length using PE-SR402FLJ coax, LF solder, RoHS. |
| 87 | |
| PE3M0096-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/113-RG316-27478, RF Cable Type: M17/113-RG316, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 SMA Male to TNC Male Cable 18 Inch Length Using M17/113-RG316 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 18 inch length using M17/113-RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 18 inch length using M17/113-RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/55-3026 SMA to M39012/26-0018 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/26-0018 TNC cable is a male to male coax assembly, PE3M0096-18, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly PE3M0096-18 is built with M17/113-RG316 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 3 GHz maximum frequency M39012/55-3026 SMA male to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0096-18 can also be used in the other direction and will be M39012/26-0018 TNC male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 18 inch length using M17/113-RG316 coax. |
| 53 | ||
| PE3W11596-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to 1.85mm Female Bulkhead Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 3.5mm male to 1.85mm female bulkhead cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to 1.85mm female bulkhead cable 18 inch length using tinned RG405 coax, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 1.85mm bulkhead cable connection on the other. Our 3.5mm to 1.85mm cable assemblies have a male gender on end 1 and female on end 2. PE3W11596-18 can also be known as a 3.5mm plug to 1.85mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 1.85mm jack cable assembly PE3W11596-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 1.85mm female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11596-18 can also be used in the other direction and will be 1.85mm female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 1.85mm jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 1.85mm female bulkhead cable 18 inch length using tinned RG405 coax. |
| 51 | ||
| PE33896-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Female Cable 18 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to SMA female cable 18 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 18 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE33896-18, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33896-18 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33896-18 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 18 inch length using RG401 coax. |
| 20 | ||
| PE3W09196-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Push-On SMP Female to TNC Female Bulkhead Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly push-on SMP female to TNC female bulkhead cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Push-on SMP female to TNC female bulkhead cable 18 inch length using PE-SR405FLJ coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and TNC bulkhead cable connection on the other. Our SMP to TNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to TNC cable is a female to female coax assembly, PE3W09196-18, can also be known as a SMP jack to TNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to TNC jack cable assembly PE3W09196-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMP female to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09196-18 can also be used in the other direction and will be TNC female bulkhead to SMP female cable assembly if the opposite connectivity is required. SMP jack to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to TNC female bulkhead cable 18 inch length using PE-SR405FLJ coax. |
| 10 | ||
| PE3W20296-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Female Bulkhead to 2.92mm Male Right Angle Cable 18 Inch Length Using PE-034SR Coax., Pasternack’s PE3W20296-18 2.92mm female bulkhead to right angle 2.92mm male RF cable assembly using PE-034SR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a right angle 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3W20296-18 can also be known as a 2.92mm jack to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3W20296-18 2.92mm jack to 2.92mm plug cable assembly is built with PE-034SR, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20296-18 can also be used in the other direction and will be a right angle 2.92mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. This 2.92mm jack bulkhead to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 9 | ||
| PE9618 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 75 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. 75 Ohm Mini SMB Jack to 75 Ohm BNC Male Adapter. Mini SMB adapter PE9618 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our Mini SMB to BNC adapter is a between series coaxial adapter design. This 75 Ohm Mini SMB adapter is precision manufactured to RF components industry specifications. Mini SMB jack to BNC male adapter is one of the many RF components that ship same day as they are ordered. PE9618 jack Mini SMB to male BNC adapter has a straight body. This Pasternack straight Mini SMB coax adapter is a in-line RF adapter. Our jack Mini SMB to male BNC adapter PE9618 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This Mini SMB to BNC radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 1 | ||
| PE34296-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. N Male to N Female Cable 18 Inch Length Using PE-SR047AL Coax., Radio frequency assembly N male to N female cable 18 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable 18 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE34296-18, can also be known as a N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE34296-18 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34296-18 can also be used in the other direction and will be type N female to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable 18 inch length using PE-SR047AL coax. |
| 0 | ||
| PE33996-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly SMA male to N female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE33996-18, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE33996-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33996-18 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 18 inch length using PE-SR402FL coax. |
| 0 | ||
| PE38296-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 18 inches. UMCX Plug Right Angle to Unterminated Lead Cable 18 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly UMCX plug right angle to unterminated lead cable 18 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug right angle to unterminated lead cable 18 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and straight cut lead cable connection on the other. Our right angle UMCX to straight cut lead cable assemblies have a plug gender on end 1 and sexless on end 2. This UMCX to straight cut lead cable is a plug to sexless coax assembly, PE38296-18, can also be known as a right angle UMCX male to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. UMCX male to straight cut lead sexless cable assembly PE38296-18 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency UMCX right angle plug to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38296-18 can also be used in the other direction and will be straight cut lead sexless to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to straight cut lead cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug right angle to unterminated lead cable 18 inch length using RG178 coax, RoHS. |
| 0 | ||
| PE3C10096-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Female Bulkhead to N Male Right Angle Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male right angle cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male right angle cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and right angle a type N cable connection on the other. Our a 3.5mm to right angle a type N cable assembly has female gender on end 1 and male on end 2. PE3C10096-18 can also be known as a 3.5mm jack to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10096-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10096-18 can also be used in the other direction and will be right angle type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19618 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-500, RF Cable Type: SPO-500, RF Cable Impedance: 50 Ohm. N Female to N Male Cable Using SPO-500 Coax. PE3W19618 is a N female to N male cable using SPO-500 coax. This Pasternack N female to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W19618 N female to N male cable assembly is constructed with SPO-500 coax. | 0 | |||
| PE3W09618 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to 2.92mm Female Bulkhead Cable Using PE-SR405FL Coax. PE3W09618 is a Mini SMP female right angle to 2.92mm female bulkhead cable using PE-SR405FL coax. This Pasternack Mini SMP female right angle to 2.92mm female bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Mini SMP right angle to 2.92mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to female 2.92mm bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W09618 Mini SMP female right angle to 2.92mm female bulkhead cable assembly is constructed with PE-SR405FL coax. | 0 | |||
![]() Vyrian | 1696183 | Phoenix Contact | Female-Female-Male, Socket-socket-plug RoHS : Compliant | 13,084 | ||
| MAX9618AXA+ | Analog Devices Inc | Operational Amplifier, 2 Func, 25uV Offset-Max, BICMOS, PDSO8 RoHS : Compliant | 12,241 | |||
| 1961850 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,094 | |||
AD9618SZ![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 2200uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 11,897 | |||
| MAX9618EVKIT | Analog Devices (Maxim Integrated) | 11,681 | ||||
AD9618SZ/883B![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 2200uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 11,591 | |||
| BUK9618-55A | Nexperia | Power Field-Effect Transistor, 61A I(D), 55V, 0.019ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,328 | |||
BUK9618-55A,118![]() | NXP Semiconductors | Power Field-Effect Transistor, 61A I(D), 55V, 0.019ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,324 | |||
| 1569618 | Phoenix Contact | Circular Connector, 4 Contact(s), Male, Solder Terminal, Plug RoHS : Compliant | 11,132 | |||
AD9618TQ![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 1100uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 10,068 | |||
| MAX9618AXA+T | Analog Devices Inc | Operational Amplifier, 1 Func, 25uV Offset-Max, BICMOS, PDSO8 RoHS : Compliant | 8,472 | |||
AD9618SQ![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 2200uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 5,779 | |||
| DATAPACK/F9961801VXC | STMicroelectronics | 3,630 | ||||
| 5962-01-324-9618 | Intel Corporation | UV PLD, 75ns, 48-Cell, CMOS, CPGA68 RoHS : Not Compliant | 3,620 | |||
| BUK96180-100A | Nexperia | Power Field-Effect Transistor, 11A I(D), 100V, 0.2ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,418 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |