| Electronic Components Datasheet Search |
|
9574 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | 9574-002U1000 | Belden Inc | Multiconductor Cable - Shielded - 2 Conductor - 18 AWG - 1000 ft (304.8m). RoHS : Compliant |
| 1 | |
| 9574-002U500 | Belden Inc | 2 #18 Pvc Shld Pvc RoHS : Compliant |
| 0 | ||
| 16-9574-0125 | Kester | K100LD SLD .125 5 LB SP RoHS : Compliant |
| 0 | ||
| 24-9574-1406 | Kester | Lead Free Solder. 0.025" dia. 1lb roll RoHS : Compliant |
| 0 | ||
| 07-9574-0050 | Kester | K100LD UP FLO-BAR 5 LB RoHS : Compliant |
| 0 | ||
| 24-9574-6417 | Kester | K100LD 3.3%/331 .025 1 RoHS : Compliant |
| 0 | ||
| 18-9574-0079 | Kester | K100LD SLD .079 20 LB S RoHS : Compliant |
| 0 | ||
| 24-9574-7611 | Kester | Wire Solder - Lead Free - No-Clean Flux - Sn99.3Cu0.7 (99.3/0.7) - 0.040" (1.02mm) Diameter - 18 AWG / 19 SWG - Spool, 1 lb (454 g). RoHS : Compliant |
| 0 | ||
| 92-9574-7618 | Kester | K100LD 3.3%/275 .031 50 RoHS : Compliant |
| 0 | ||
| 24-9574-6401 | Kester | K100LD 3.3%/331 .020 1 RoHS : Compliant |
| 0 | ||
| 96-9574-9531 | Kester | K100LD 3.3%/268 .031 50 RoHS : Compliant |
| 0 | ||
| 16-9574-0079 | Kester | K100LD SLD .125 5 LB S RoHS : Compliant |
| 0 | ||
| 25-9574-7634 | Kester | K100LD 3.3%/275 .093 4 RoHS : Compliant |
| 0 | ||
| 9574-RED-5000 | Belden Inc | Electronic, 2 Conductor 18AWG (Solid) Bare Copper, PVC Insulation, Overall Beldfoil® Shield, Red PVC Outer Jacket, FPLR RoHS : Compliant |
| 0 | ||
| 24-9574-1401 | Kester | Lead Free Rosin Activated (RA) - Wire Solder - Sn99.3Cu0.7 (99.3/0.7) - 24 AWG - 25 SWG Spool - 1 lb (454 g). RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | NV9574S2P1 | Navitas Semiconductor | GANSENSE CONTROL 700V 520MOHM ESOP-7 - Tape and Reel (Alt: NV9574S2P1) RoHS : Compliant |
| 0 | |
| 1-1969574-2 | TE Connectivity | - Trays (Alt: 1-1969574-2) RoHS : Compliant |
| 0 | ||
| 406957-4 | TE Connectivity | - Bulk (Alt: 406957-4) RoHS : Compliant | 0 | |||
| 0097095747 | Qnity Laird | - Bulk (Alt: 0097095747) RoHS : Compliant | 0 | |||
| 539574-9 | TE Connectivity | - Bulk (Alt: 539574-9) RoHS : Compliant |
| 0 | ||
| 2-1969574-4 | TE Connectivity | - Trays (Alt: 2-1969574-4) RoHS : Compliant |
| 0 | ||
| 3-1969574-2 | TE Connectivity | - Trays (Alt: 3-1969574-2) RoHS : Compliant |
| 0 | ||
| 1895740000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1895740000) RoHS : Compliant | 0 | |||
| 2-1969574-6 | TE Connectivity | - Trays (Alt: 2-1969574-6) RoHS : Compliant |
| 0 | ||
| MAL209574471E3 | Vishay Intertechnologies | - Boxed Product (Development Kits) (Alt: MAL209574471E3) RoHS : Compliant |
| 0 | ||
| 1-1999957-4 | TE Connectivity | WIRE ANVIL, SIDE FEED 2.54 - Bag (Alt: 1-1999957-4) RoHS : Not Compliant | 0 | |||
| 5039574012 | TE Connectivity | TPEM-NR7-0-SP - Tape and Reel (Alt: 5039574012) RoHS : Not Compliant |
| 0 | ||
| 2-1969574-8 | TE Connectivity | - Trays (Alt: 2-1969574-8) RoHS : Compliant |
| 0 | ||
| BCM957412N4120C | Broadcom Limited | Network Adapter I2C/PCIe/SPI/SMBus Socket Mount - Bulk (Alt: BCM957412N4120C) RoHS : Not Compliant | 0 | |||
| 794957-4 | TE Connectivity | - Tape and Reel (Alt: 794957-4) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | SN74LV8T541QDGSRQ1 | Texas Instruments | Buffers & Line Drivers Automotive eight-bit fixed-direction lev RoHS : Compliant |
| 5,988 | |
| SN74LV8T9541MPWREP | Texas Instruments | Buffers & Line Drivers RoHS : Compliant |
| 2,900 | ||
| SN74LV8T541MPWREP | Texas Instruments | Buffers & Line Drivers RoHS : Compliant |
| 2,482 | ||
| SN74LV8T138MPWREP | Texas Instruments | Encoders, Decoders, Multiplexers & Demultiplexers RoHS : Compliant |
| 2,414 | ||
| SN74LV8T573QDGSRQ1 | Texas Instruments | Latches Automotive transpare nt D-type latches w RoHS : Compliant |
| 900 | ||
| SN74LV8T574QDGSRQ1 | Texas Instruments | Flip Flops Automotive octal D-t ype flip-flops with RoHS : Compliant |
| 900 | ||
| SN74AHCT374QDGSRQ1 | Texas Instruments | Flip Flops Automotive octal D-t ype edge-triggered RoHS : Compliant |
| 900 | ||
| SN74LVC9541ADGSRQ1 | Texas Instruments | Buffers & Line Drivers Automotive 1.65V to 3.6V 8ch buffers wit RoHS : Compliant |
| 800 | ||
| 74CBTLV3257PWRQ1 | Texas Instruments | Multiplexer Switch ICs Automotive 3.3-V 2: 1 (SPDT) 4-channel RoHS : Compliant |
| 741 | ||
| SN74LVC9541APWRQ1 | Texas Instruments | Buffers & Line Drivers Automotive 1.65V to 3.6V 8ch buffers wit RoHS : Compliant |
| 436 | ||
| 09060009574 | HARTING Technology Group | DIN 41612 Connectors CRIMP 1,M, PL2 SINGLE |
| 0 | ||
| 9574 0025000 | Belden Inc | Multi-Conductor Cables 2 #18 PVC SHLD PVC RoHS : Compliant |
| 0 | ||
| 9574 002U1000 | Belden Inc | Multi-Conductor Cables 18AWG 2C SOLID 1000ft BOX RED RoHS : Compliant |
| 0 | ||
| 9574 002U500 | Belden Inc | Multi-Conductor Cables 2 #18 PVC SHLD PVC RoHS : Compliant |
| 0 | ||
| 957437-000 | TE Connectivity | Coaxial Cables 9530J1424-0 |
| 0 | ||
![]() Newark | NV9574S1P1 | Navitas Semiconductor | Ac/Dc Converter, Hfqr Flyback, Esop-7; |Navitas NV9574S1P1 RoHS : Compliant |
| 4,000 | |
| NV9574S1P1 | Navitas Semiconductor | Ac/Dc Converter, Hfqr Flyback, Esop-7; |Navitas NV9574S1P1 RoHS : Compliant |
| 4,000 | ||
| NV9574S121 | Navitas Semiconductor | Ac/Dc Converter, Hfqr Flyback, Esop-7; |Navitas NV9574S121 RoHS : Compliant |
| 4,000 | ||
| NV9574S121 | Navitas Semiconductor | Ac/Dc Converter, Hfqr Flyback, Esop-7; |Navitas NV9574S121 RoHS : Compliant |
| 4,000 | ||
| MAL215957471E3 | Vishay Intertechnologies | Cap, 470?f, 450V, Alu Elec, Snap In; |Vishay MAL215957471E3 RoHS : Compliant |
| 300 | ||
| MC29574 | SPC Multicomp | Terminal, Ring Tongue, #6, Crimp, Red; Stud Size - Metric:M3.5; Stud Size - Imperial:#6; Wire Size Awg Max:16Awg; Conductor Area Csa:1.5Mm²; Product Range:Mc29 Series; Insulator Colour:Red; Insulator Material:Vinyl; Stud/Tab Size:#6 Rohs Compliant: Yes RoHS : Compliant |
| 230 | ||
| 2957-46 | CamdenBoss Ltd | Enclosure Plast, Handheld, Abs, 14Mm; |Camdenboss 2957-46 RoHS : Compliant |
| 134 | ||
| SC9574 | Fairview Microwave Inc | Rf/Coaxial Connector, mmcx Coaxial; |Fairview Microwave SC9574 RoHS : Not Compliant |
| 97 | ||
| MP009574 | SPC Multicomp | Heavy Duty Insert, Rcpt, 24+Pe, Size 24B; |Multicomp Pro MP009574 RoHS : Compliant |
| 59 | ||
| 999574 | Weidmüller Interface GmbH & Co. KG | Wire-To-Board Terminal Block, 3.5Mm; |Weidmuller 999574 RoHS : Compliant |
| 13 | ||
| MAL225957471E3 | Vishay Intertechnologies | Cap, 470?f, 450V, Alu Elec, Snap-In; |Vishay MAL225957471E3 RoHS : Compliant |
| 12 | ||
| BCM957412A4120AC | Broadcom Limited | Interface Card, Pci Express 3.0, 10Gb/S; |Broadcom BCM957412A4120AC RoHS : Compliant |
| 9 | ||
| FMCA2957-48 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2957-48 RoHS : Not Compliant |
| 4 | ||
| BCM957416N4160C | Broadcom Limited | Network Adapter Card, 2Xrj45, 10 Gbps; Available Until Stocks Are Exhausted |Broadcom BCM957416N4160C RoHS : Compliant |
| 3 | ||
| BCM957416A4160C | Broadcom Limited | Interface Card, Pci Express 3.0, 10Gb/S; Available Until Stocks Are Exhausted |Broadcom BCM957416A4160C RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | AD9574BCPZ | Analog Devices Inc | Enterprise network clock chip RoHS : Compliant |
| 19 | |
| AD9574BCPZ-REEL7 | Analog Devices Inc | Enterprise network clock chip RoHS : Compliant |
| 0 | ||
![]() RS | 689574 | RS Pro | NITRILE RUBBER O-RING 3.17MM BORE 6.35MM O.D -30 - +120 DEG C |
| 47 | |
| 1895743 | RS Pro | FLAP WHEEL 30MM X 20MM 120GRIT |
| 16 | ||
| 1895741 | RS Pro | FLAP WHEEL 30MM X 20MM 80GRIT |
| 16 | ||
| 8659574 | RS Pro | SOFT WIRING DUCT WITH ADH TAPE BROWN1M |
| 11 | ||
| 1895749 | RS Pro | FLAP WHEEL 50MM X 30MM 120GRIT |
| 11 | ||
| 1895747 | RS Pro | FLAP WHEEL 50MM X 30MM 60GRIT |
| 9 | ||
| 1895748 | RS Pro | FLAP WHEEL 50MM X 30MM 80GRIT |
| 9 | ||
| 1395742 | Phoenix Contact | SAC-5P-P12MR/ 1,5-PUR, MALE ANGLED, OPENENDED RoHS : Compliant |
| 5 | ||
| ZLD18-4AB4A8 (1095740) | SICK AG | PHOTOELECTRIC SENSOR, HYBRID, 1M, M18, 10-30 VDC, IP67, M18 SERIES |
| 3 | ||
| F059574 | GEFRAN spa | PID CONTROLLER, 1/16 DIN |
| 2 | ||
| A-95744 | Makita UK | MULTI-TOOL SANDPAPER, 100 GRIT, 10/PK |
| 2 | ||
| 24-9574-7618 | Kester | SOLDER WIRE, NO-CLEAN FLUX, LEAD-FREE, .031 DIA, CORE 3.3%, 1 LB |
| 2 | ||
| CST180-2 (101179574) | Schmersal | ACTUATOR FOR ELECTRONIC SAFETY SENSOR CSS180 |
| 2 | ||
| BI2-EG08K-AP6X-V1131/S957 (4669452) | TURCK Inc | PROXIMITY SENSOR, M8 INDUCTIVE, 2MM RANGE, 3 WIRE, PNP, 10-30VDC, M8, S4669452 |
| 2 | ||
| 9574 | Apex Tool Group LLC | GEARWRENCH;WR RAT COMB STBY FLEX 9/16 |
| 0 | ||
![]() Bisco Industries | MS51957-45B | North East Fasteners Corporation | 17,668 | |||
| TP51957-40 | 2,050 | |||||
| MS51957-45B | MS MACHINE SCREWS | 388 | ||||
| MS51957-42 | MS MACHINE SCREWS | 284 | ||||
| MS9574-05 | MS Bolts | 272 | ||||
| MS51957-42 | Crescent Manufacturing | 167 | ||||
| MS51957-45B | Crescent Manufacturing | 164 | ||||
| MS51957-45B NP | 150 | |||||
| MS51957-4 | MS MACHINE SCREWS | 144 | ||||
| 9574C-B-0632-0 | Amatom Electronic Hardware | 105 | ||||
| MS51957-41 NP | 100 | |||||
| ST9574-34 | Lyn-Tron Inc | 39 | ||||
| MS15795-747 | MS Washers | 18 | ||||
| MS51957-40B | Pilgrim Screw Corporation | 14 | ||||
| MS51957-42B | MS MACHINE SCREWS | 1 | ||||
![]() Rochester Electronics | PCA9574PW,112![]() | NXP Semiconductors | Parallel IO Port RoHS : Compliant |
| 4,128 | |
PCA9574PW,118![]() | NXP Semiconductors | Parallel IO Port RoHS : Compliant |
| 80,756 | ||
| AD9574BCPZ | Analog Devices Inc | Clock Generators and Synthesizers Clock Generator 312.5MHz 48-QFN Tray RoHS : Compliant |
| 5,769 | ||
| AD9574BCPZ-REEL7 | Analog Devices Inc | Phase Locked Loop RoHS : Compliant |
| 450 | ||
5962-89574012A![]() | Texas Instruments | Parallel In Serial Out, ALS Series, 8-Bit, Right Direction, Complementary Output, TTL, CQCC20 RoHS : Not Compliant |
| 20 | ||
5962-8957401EA![]() | Texas Instruments | Parallel In Serial Out, ALS Series, 8-Bit, Right Direction, Complementary Output, TTL, CDIP16 RoHS : Not Compliant |
| 296 | ||
![]() Sager | IEGS6661-1REC5-31957-40-V | Sensata Circuit Breakers | Circuit Breakers | 0 | ||
| 1-1969574-2 | TE Connectivity | Headers & Wire Housings ASSY,HDR,RA,GWT DUAL ROW, EP2.5 RoHS : Compliant |
| 0 | ||
| 0009574086 | Molex | Molex | 0 | |||
| 0097095747 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding S3,STR,SnB .110x.350x.187x15 | 0 | |||
| 9895747004 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| IELK1-1REC5-29574-5 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 1019574 | Phoenix Contact | DIN Rail Terminal Blocks PTVFIX 12X2,5 RD RoHS : Compliant |
| 0 | ||
| 539574-9 | TE Connectivity | Bench Top Tools BEARING RAM ASSEMBLY | 0 | |||
| 2-1969574-4 | TE Connectivity | Headers & Wire Housings ASSY,HDR,RA,GWT DUAL ROW, EP2.5 RoHS : Compliant |
| 0 | ||
| 1395742 | Phoenix Contact | SAC-5P-P12MR/ 1 5-PUR RoHS : Compliant |
| 0 | ||
| E95749-000 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters TXR66AB00-1607AI RoHS : Not Compliant |
| 0 | ||
| 1-1969574-4 | TE Connectivity | Headers & Wire Housings ASSY,HDR,RA,GWT DUAL ROW, EP2.5 RoHS : Compliant |
| 0 | ||
| 3-1969574-2 | TE Connectivity | Headers & Wire Housings ASSY,HDR,RA,GWT,DUAL ROW, EP2.5 RoHS : Compliant |
| 0 | ||
| 1-103957-4 | TE Connectivity | Headers & Wire Housings 4P RCPT SR LATCH RoHS : Compliant |
| 0 | ||
| 1419574 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P- 20 0-647/ FS SCO BK | 0 | |||
![]() TME | 826957-4 | TE Connectivity | Connector: pin strips; male; PIN: 8; soldering,THT; Inom: 5A; angled RoHS : Compliant |
| 3,672 | |
| 89-5745/10 | ATG | Sleeves; Size: 10; MAXICUT® ULTRA™; 45mm |
| 20 | ||
| 1695741687 | Weidmüller Interface GmbH & Co. KG | Label; self-adhesive RoHS : Compliant |
| 10 | ||
| 89-5745/07 | ATG | Sleeves; Size: 7; MAXICUT® ULTRA™; 45mm |
| 7 | ||
| 0957408 | FATH | Latch |
| 6 | ||
| 09574420511000 | HARTING Technology Group | Connector: fiber optic; female; black RoHS : Compliant |
| 5 | ||
| 09574020512000 | HARTING Technology Group | Connector: fiber optic; plug; black |
| 0 | ||
PCA9574PW,118![]() | NXP Semiconductors | IC: interface; 8bit,I/O expander,translator; 1.1÷3.6VDC; I2C; SMD RoHS : Compliant |
| 0 | ||
PCA9574BS,118![]() | NXP Semiconductors | IC: interface; 8bit,I/O expander,translator; 1.1÷3.6VDC; I2C; SMD RoHS : Compliant |
| 0 | ||
| 09574670004000 | HARTING Technology Group | Connector: fiber optic; plug; female; straight; black RoHS : Compliant |
| 0 | ||
| 1095740000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; OMNIMATE; 20A; 630V RoHS : Compliant |
| 0 | ||
| 1595740000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; OMNIMATE; 15A,32A; 300V,500V RoHS : Compliant |
| 0 | ||
| 09574090500000 | HARTING Technology Group | Connector: fiber optic; PP Metal LC duplex MM GOF |
| 0 | ||
| 09574680500000 | HARTING Technology Group | Connector: fiber optic; plug RoHS : Compliant |
| 0 | ||
| 09574000002000 | HARTING Technology Group | Connector: fiber optic; plug; Colour: white |
| 0 | ||
![]() ComSIT USA | K95746 | Wurth Elektronik | AVAILABLE EU | 13,926 | ||
![]() ComSIT USA | PCA9574BS118 | NXP Semiconductors | 8-BIT I2C-BUS AND SMBUS, LEVEL TRANSLATING, LOW VOLTAGE GPIO Interface Circuit, CMOS, PQCC16 RoHS : Compliant | 700 | ||
| MAL215957471E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount RoHS : Compliant | 350 | |||
![]() Interstate Connecting Components | 1-1969574-2 | TE Connectivity | ASSY,HDR,RIGHT ANGLE,GWT,DUAL RoHS : Compliant |
| 0 | |
| 539574-9 | TE Connectivity | BEARING RAM ASSEMBLY | 0 | |||
| 2-1969574-4 | TE Connectivity | ASSY,HDR,RIGHT ANGLE,GWT,DUAL RoHS : Compliant |
| 0 | ||
| 1-1969574-4 | TE Connectivity | ASSY,HDR,RIGHT ANGLE,GWT,DUAL RoHS : Compliant |
| 0 | ||
| 3-1969574-2 | TE Connectivity | ASSY,HDR,RIGHT ANGLE,GWT,DUAL RoHS : Compliant |
| 0 | ||
| 1-103957-4 | TE Connectivity | 5X4 MTE RCPT SR LATCH .100CL RoHS : Compliant |
| 0 | ||
| 3-2388957-4 | TE Connectivity | PCIE5,SMT,2X2.76TAB,164P,GF,10 RoHS : Compliant | 0 | |||
| 2-1969574-6 | TE Connectivity | ASSY,HDR,RIGHT ANGLE,GWT,DUAL RoHS : Compliant |
| 0 | ||
| 5039574012 | TE Connectivity | TPEM-NR7-0-SP | 0 | |||
| 2-1969574-8 | TE Connectivity | ASSY,HDR,RIGHT ANGLE,GWT,DUAL RoHS : Compliant |
| 0 | ||
| 794957-4 | TE Connectivity | VAL-U-LOK PIN PHBZ AU 22-26AWG RoHS : Compliant |
| 0 | ||
| 7-2388957-4 | TE Connectivity | PCIE5,SMT,2X2.76TAB,164P,30 ,1 RoHS : Compliant | 0 | |||
| 2325957-4 | TE Connectivity | HVA280 3PHM PLUG 3X2.5SQ,CODE | 0 | |||
| 509957-4 | TE Connectivity | PIO-PRINT CARD | 0 | |||
| 2-539574-7 | TE Connectivity | BEARING RAM ASSEMBLY | 0 | |||
![]() NexGen Digital | 10029574RD CUT | Zebra Technologies | 69 | |||
![]() PEI Genesis | S3595-7403S34S | SOURIAU-SUNBANK |
| 0 | ||
| S3595-7409S30SS | SOURIAU-SUNBANK |
| 0 | |||
| S3595-7405S34S | SOURIAU-SUNBANK |
| 0 | |||
| S3595-7406S34S | SOURIAU-SUNBANK |
| 0 | |||
| S3595-7404S34S | SOURIAU-SUNBANK |
| 0 | |||
| 10-035957-401 | Amphenol Corporation |
| 0 | |||
| S3595-7407S34S | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 5-103957-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 10,895 | |
| 826957-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,424 | ||
| 1-103957-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,287 | ||
| 10-035957-401 | Amphenol Corporation | Connector |
| 677 | ||
| 4-2388957-4 | TE Connectivity | Connectors RoHS : Compliant |
| 185 | ||
| 1095742-1 | Amphenol Corporation | Connector |
| 21 | ||
![]() PUI | 12.89574 | 25,920 | ||||
![]() Richardson RFPD | CVHD-957-49.152 | Crystek Corporation | OSCILLATOR VCXO RoHS : Compliant | 0 | ||
| SI5335B-B09574-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| CVHD-957-45.1584 | Crystek Corporation | OSCILLATOR VCXO RoHS : Compliant | 0 | |||
| 935309574557 | NXP Semiconductors | MPU PowerQUICC II Pro MPC83xx Processor RISC 32bit RoHS : Not Compliant | 0 | |||
| SI5335B-B09574-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| 16-750-195-740-T | Custom Cable Inc | RF CUSTOM CABLE ASSY RoHS : Compliant | 0 | |||
| 935317879574 | NXP Semiconductors | MCU 8-bit S08 CISC 4KB Flash 3.3V/5V Automotive 20 RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 5-103957-4 | TE Connectivity | INSTOCK RoHS : Compliant | 72,883 | ||
| 12.89574 | Geyer Electronic E K | INSTOCK | 25,920 | |||
| 09574110501202- | HARTING Technology Group | INSTOCK | 114 | |||
| MS51957-42 | INSTOCK | 50 | ||||
| 09574110501200- | HARTING Technology Group | INSTOCK | 14 | |||
![]() Avnet Abacus | MAL215957471E3 | Vishay Intertechnologies | Electrolytic Capacitor 470 uF 450 V 20 SnapIn 5000 hours 105C Polar 159 PULSI Series (Alt: MAL215957471E3) RoHS : Compliant | 1,100 | ||
| 1709574 | Phoenix Contact | FKC 25 3ST BDI1VI1I1C FKC253STBDI1VI1I1C (Alt: 1709574) RoHS : Compliant | 0 | |||
| 349574-2 | TE Connectivity | STSTPC DUPLEXLE (Alt: 349574-2) RoHS : Not Compliant | 0 | |||
| 539574-9 | TE Connectivity | (Alt: 539574-9) RoHS : Compliant | 0 | |||
| 1495743-1 | TE Connectivity | AMP14957431 (Alt: 1495743-1) RoHS : Compliant | 0 | |||
| E95749-000 | TE Connectivity | (Alt: E95749-000) RoHS : Not Compliant | 0 | |||
| 1-103957-4 | TE Connectivity | Conn IDC Connector RCP 4 POS 254mm IDT ST Cable Mount Strip (Alt: 1-103957-4) RoHS : Compliant | 0 | |||
| 1-103957-4 | TE Connectivity | Conn IDC Connector RCP 4 POS 254mm IDT ST Cable Mount Strip (Alt: 1-103957-4) RoHS : Compliant | 0 | |||
| 5039574012 | TE Connectivity | TPEMNR70SP (Alt: 5039574012) RoHS : Compliant | 0 | |||
| 1-1969574-2 | TE Connectivity | (Alt: 1-1969574-2) RoHS : Compliant | 0 | |||
| 2-1969574-4 | TE Connectivity | (Alt: 2-1969574-4) RoHS : Compliant | 0 | |||
| 1-1969574-4 | TE Connectivity | ASSYHDRRIGHT ANGLEGWTDUAL ROW EP25 (Alt: 1-1969574-4) RoHS : Compliant | 0 | |||
| 3-1969574-2 | TE Connectivity | (Alt: 3-1969574-2) RoHS : Compliant | 0 | |||
| 3-2388957-4 | TE Connectivity | (Alt: 3-2388957-4) RoHS : Compliant | 0 | |||
| 2-1969574-6 | TE Connectivity | (Alt: 2-1969574-6) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2495744-1 | TE Connectivity | (Alt: 2495744-1) RoHS : Compliant | 0 | ||
| SFH 3219 E9574 | ams OSRAM Group | (Alt: SFH 3219 E9574) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | MS51957-43 | IN STOCK SHIP TODAY |
| 2,824 | ||
| MS51957-45 | IN STOCK SHIP TODAY |
| 180 | |||
| MS51957-42 | IN STOCK SHIP TODAY |
| 91 | |||
| MS51957-49 | IN STOCK SHIP TODAY |
| 62 | |||
| MS51957-46 | IN STOCK SHIP TODAY |
| 60 | |||
| 103957-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 40 | ||
| MS51957-42B | ALATEC Inc | IN STOCK SHIP TODAY |
| 20 | ||
| MS51957-4 | IN STOCK SHIP TODAY |
| 20 | |||
AM79574JC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 20 | |||
| MS51957-44 | IN STOCK SHIP TODAY |
| 10 | |||
AM79574-2JC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 9 | |||
![]() DB Roberts | MS51957-44 | Military Specifications | 8-32 X 7/16 PH PAN MS 18-8 |
| 5,923 | |
| MS51957-46 | Military Specifications | 8-32 X 5/8 PH PAN MS 18-8 |
| 5,263 | ||
| MS51957-45.D | Military Specifications | SCREW DFARS COMPLIANT REQUIRED |
| 4,505 | ||
| MS51957-42.D | Military Specifications | PHIL PAN M/S DFARS COMPLIANT REQUIRED |
| 3,962 | ||
| MS51957-43 | Military Specifications | 8-32 X 3/8 PH PAN MS 18-8 |
| 2,489 | ||
| MS51957-41 | Military Specifications | 8-32 X 1/4 PH PAN MS 18-8 |
| 1,824 | ||
| MS51957-41.D | Military Specifications | PHIL PAN M/S DFARS COMPLIANT REQUIRED |
| 1,215 | ||
| MS51957-4.D | Military Specifications | PHIL PAN M/S DFARS COMPLIANT REQUIRED |
| 1,105 | ||
| MS51957-48 | Military Specifications |
| 200 | |||
| MS51957-43B | Military Specifications |
| 120 | |||
| MS51957-49.D | Military Specifications | PHIL PAN M/S DFARS COMPLIANT REQUIRED |
| 75 | ||
| MS51957-47 | Military Specifications | 8-32 X 3/4 PH PAN MS 18-8 |
| 38 | ||
| MS51957-45B | Military Specifications |
| 22 | |||
| 95749 | Pop Rivets | M6JN MANDREL | 0 | |||
| MC-9574 | Southco | 0 | ||||
![]() EBV Elektronik | BCM957416N4160C | Broadcom Limited | Network Adapter Card PCIeSMBus Socket Mount (Alt: BCM957416N4160C) RoHS : Compliant | 20 | ||
| BCM957414N4140C | Broadcom Limited | Ethernet Adapter EthernetSPISMBusPCIeUART Socket Mount (Alt: BCM957414N4140C) RoHS : Compliant | 20 | |||
| BCM957412N4120C | Broadcom Limited | Network Adapter I2CPCIeSPISMBus Socket Mount (Alt: BCM957412N4120C) RoHS : Compliant | 10 | |||
| BCM957416A4160C | Broadcom Limited | Networking Interface Card 10Gbps PCI Express Gen3 x8 2Port (Alt: BCM957416A4160C) RoHS : Compliant | 10 | |||
| BCM957412A4120AC | Broadcom Limited | Networking Interface Card 10Gbps PCI Express Gen3 x8 2Port (Alt: BCM957412A4120AC) RoHS : Compliant | 10 | |||
| BCM957414A4142CC | Broadcom Limited | Network Interface Card PCIe Socket Mount (Alt: BCM957414A4142CC) RoHS : Compliant | 10 | |||
| BCM957414A4140C | Broadcom Limited | ASSYTOPBCM957414A4140C (Alt: BCM957414A4140C) RoHS : Compliant | 0 | |||
| BCM957454A4540C | Broadcom Limited | (Alt: BCM957454A4540C) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 2095743 | FDH Electronics | Supplies - RF | 14 | ||
![]() Flip Electronics | PCA9574PW,118![]() | NXP Semiconductors | Stock RoHS : Compliant |
| 17,500 | |
![]() Master Electronics | 24-9574-7618 | Kester | Zero Halogen Solder Pastes RoHS : Compliant |
| 70 | |
| 9574-RED-U1000 | Belden Inc | Multiconductor Cable - Shielded - 2 Conductor - 18 AWG - 1000 ft (304.8m). RoHS : Compliant |
| 1 | ||
| 1-1969574-2 | TE Connectivity | ASSEMBLY PIN HEADER EP 2.5 HORIZONTAL DUAL ROW MOQ Reduction RoHS : Compliant |
| 0 | ||
| 000695740 | ITT Interconnect Solutions | Veam Cir Vbn Other |Itt Cannon FRCIR06CF-18-1S-F80-T12 RoHS : Not Compliant |
| 0 | ||
| 1019574 | Phoenix Contact | PTVFIX 12X2 5 RD RoHS : Compliant |
| 0 | ||
| 539574-9 | TE Connectivity | BEARING RAM ASSEMBLY RoHS : Compliant |
| 0 | ||
| 2-1969574-4 | TE Connectivity | ASSEMBLY PIN HEADER EP 2.5 HORIZONTAL DUAL ROW MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1395742 | Phoenix Contact | SAC-5P-P12MR/ 1 5-PUR RoHS : Compliant |
| 0 | ||
| E95749-000 | TE Connectivity | TXR66AB00-1607AI MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 1-1969574-4 | TE Connectivity | ASSEMBLY PIN HEADER EP 2.5 HORIZONTAL DUAL ROW MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-1969574-2 | TE Connectivity | ASSEMBLY PIN HEADER EP 2.5 HORIZONTAL DUAL ROW MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-103957-4 | TE Connectivity | 5X4 MTE RCPT SR LATCH .100CL RoHS : Compliant |
| 0 | ||
| 1419574 | Phoenix Contact | SAC-5P- 20 0-647/FS SCO BK RoHS : Compliant |
| 0 | ||
| CA1-X0-09-574-A21-MG | Carling Technologies | C-Series Circuit Breaker Rohs Compliant: Yes |Carling Technologies CA1-X0-09-574-A21-MG RoHS : Compliant |
| 0 | ||
| 121659-5742 | ITT Interconnect Solutions | Conn MIL-DTL-26482 Circular PIN 24 POS Crimp ST Cable Mount 24 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE9574 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Connector Series 3: HN, Connector Gender 3: Female, Connector Polarity 3: Standard, Adapter Body Style: Tee, Connector Mount Method 1: None, Connector Mount Method 2: None, Connector Body Material 3: Brass, Connector Body Plating 3: Nickel. HN Tee Adapter Female-Female-Female. HN adapter PE9574 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our HN to HN adapter is a in-series coaxial adapter design. This 50 Ohm HN adapter is precision manufactured to RF components industry specifications. HN female to HN female adapter is one of the many RF components that ship same day as they are ordered. PE9574 female HN to female HN adapter has a tee body. This Pasternack tee HN adapter is also known as a HN T connector. Our female HN to female HN adapter PE9574 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This HN to HN radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 37 | |
| PE3W09574-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SSMA Female 4 Hole Flange to SSMA Female 4 Hole Flange Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SSMA female 4 hole flange to SSMA female 4 hole flange cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA female 4 hole flange to SSMA female 4 hole flange cable 18 inch length using tinned RG405 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA 4 hole flange cable connection on one end and SSMA 4 hole flange cable connection on the other. Our SSMA to SSMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09574-18 can also be known as a SSMA jack to SSMA jack cable assembly and will be shipped same-day as it is purchased. SSMA jack to SSMA jack cable assembly PE3W09574-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA female 4 hole flange to SSMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA jack 4 hole flange to SSMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA female 4 hole flange to SSMA female 4 hole flange cable 18 inch length using tinned RG405 coax. |
| 0 | ||
| PE39574 | Pasternack Enterprises | 0 | ||||
| PE3W09574 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SSMA Female 4 Hole Flange to SSMA Female 4 Hole Flange Cable Using Tinned RG405 Coax., Radio frequency assembly SSMA female 4 hole flange to SSMA female 4 hole flange cable using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA female 4 hole flange to SSMA female 4 hole flange cable using tinned RG405 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA 4 hole flange cable connection on one end and SSMA 4 hole flange cable connection on the other. Our SSMA to SSMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09574 can also be known as a SSMA jack to SSMA jack cable assembly and will be shipped same-day as it is purchased. SSMA jack to SSMA jack cable assembly PE3W09574 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA female 4 hole flange to SSMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA jack 4 hole flange to SSMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA female 4 hole flange to SSMA female 4 hole flange cable using tinned RG405 coax. | 0 | |||
| PE35957-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. FME Plug to FME Plug Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly FME plug to FME plug cable 48 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to FME plug cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a plug gender on end 1 and plug on end 2. This FME to FME cable is a plug to plug coax assembly, PE35957-48, can also be known as a FME male to FME male cable assembly and will be shipped same-day as it is purchased. FME male to FME male cable assembly PE35957-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME plug to FME plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME male to FME male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to FME plug cable 48 inch length using RG174 coax. |
| 0 | ||
| PE3C9574 | Pasternack Enterprises | 0 | ||||
| PE3W09574-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SSMA Female 4 Hole Flange to SSMA Female 4 Hole Flange Cable 6 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SSMA female 4 hole flange to SSMA female 4 hole flange cable 6 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA female 4 hole flange to SSMA female 4 hole flange cable 6 inch length using tinned RG405 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA 4 hole flange cable connection on one end and SSMA 4 hole flange cable connection on the other. Our SSMA to SSMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09574-6 can also be known as a SSMA jack to SSMA jack cable assembly and will be shipped same-day as it is purchased. SSMA jack to SSMA jack cable assembly PE3W09574-6 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA female 4 hole flange to SSMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA jack 4 hole flange to SSMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA female 4 hole flange to SSMA female 4 hole flange cable 6 inch length using tinned RG405 coax. |
| 0 | ||
| PE34957-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to BNC Female Bulkhead Cable 48 Inch Length Using RG400 Coax., Radio frequency assembly SMA male right angle to BNC female bulkhead cable 48 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC female bulkhead cable 48 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC bulkhead cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE34957-48, can also be known as a right angle SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE34957-48 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA right angle male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34957-48 can also be used in the other direction and will be BNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC female bulkhead cable 48 inch length using RG400 coax. |
| 0 | ||
| PE37957-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 48 Inch Length Using PE-C240 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE37957-48, can also be known as a low loss 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37957-48 is built with PE-C240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37957-48 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using PE-C240 coax. |
| 0 | ||
| PE3W09574-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Female 4 Hole Flange to SSMA Female 4 Hole Flange Cable 24 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SSMA female 4 hole flange to SSMA female 4 hole flange cable 24 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA female 4 hole flange to SSMA female 4 hole flange cable 24 inch length using tinned RG405 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA 4 hole flange cable connection on one end and SSMA 4 hole flange cable connection on the other. Our SSMA to SSMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09574-24 can also be known as a SSMA jack to SSMA jack cable assembly and will be shipped same-day as it is purchased. SSMA jack to SSMA jack cable assembly PE3W09574-24 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA female 4 hole flange to SSMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA jack 4 hole flange to SSMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA female 4 hole flange to SSMA female 4 hole flange cable 24 inch length using tinned RG405 coax. |
| 0 | ||
| PE3C7957-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.3-10 Male Right Angle to 4.3-10 Female Low PIM Cable 48 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 4.3-10 female low PIM cable 48 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to 4.3-10 female low PIM cable 48 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7957-48, can also be known as a low PIM right angle 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7957-48 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7957-48 can also be used in the other direction and will be 4.3-10 female to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to 4.3-10 female low PIM cable 48 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3W09574-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMA Female 4 Hole Flange to SSMA Female 4 Hole Flange Cable 12 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SSMA female 4 hole flange to SSMA female 4 hole flange cable 12 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA female 4 hole flange to SSMA female 4 hole flange cable 12 inch length using tinned RG405 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA 4 hole flange cable connection on one end and SSMA 4 hole flange cable connection on the other. Our SSMA to SSMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09574-12 can also be known as a SSMA jack to SSMA jack cable assembly and will be shipped same-day as it is purchased. SSMA jack to SSMA jack cable assembly PE3W09574-12 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA female 4 hole flange to SSMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA jack 4 hole flange to SSMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA female 4 hole flange to SSMA female 4 hole flange cable 12 inch length using tinned RG405 coax. |
| 0 | ||
| PE3C9574/SP | Pasternack Enterprises | 0 | ||||
| PE3W09574-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMA Female 4 Hole Flange to SSMA Female 4 Hole Flange Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SSMA female 4 hole flange to SSMA female 4 hole flange cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA female 4 hole flange to SSMA female 4 hole flange cable 36 inch length using tinned RG405 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA 4 hole flange cable connection on one end and SSMA 4 hole flange cable connection on the other. Our SSMA to SSMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09574-36 can also be known as a SSMA jack to SSMA jack cable assembly and will be shipped same-day as it is purchased. SSMA jack to SSMA jack cable assembly PE3W09574-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA female 4 hole flange to SSMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA jack 4 hole flange to SSMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA female 4 hole flange to SSMA female 4 hole flange cable 36 inch length using tinned RG405 coax. |
| 0 | ||
| PE3957-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to N Male Cable 48 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to N male cable 48 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 48 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3957-48, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3957-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3957-48 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 48 inch length using RG316-DS coax. |
| 0 | ||
![]() Vyrian | MAL215957471E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount RoHS : Compliant | 15,292 | ||
PCA9574PW,112![]() | NXP Semiconductors | Interface Circuit, CMOS, PDSO16 RoHS : Compliant | 8,885 | |||
| MM9574 | Analog Devices Inc | 8,590 | ||||
UCC3957-4M![]() | Texas Instruments | Power Supply Support Circuit, Fixed, 4 Channel, BICMOS, PDSO16 | 6,519 | |||
| 5962-9957401QXA | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, 27648-Cell, CMOS, CBGA560 | 4,068 | |||
| 5962-9957401QXC | AMD Xilinx | Field Programmable Gate Array, 6144 CLBs, 1124022 Gates, CMOS, CBGA560 | 3,999 | |||
| 5962R9957401NUX | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, CMOS, PBGA560 | 3,634 | |||
| 5962-9957401NUX | AMD Xilinx | Field Programmable Gate Array, 6144 CLBs, 1124022 Gates, CMOS, PBGA560 | 3,429 | |||
| 5962R9957401NUA | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, 27648-Cell, CMOS, PBGA560 | 3,384 | |||
| 5962R9957402QXC | AMD Xilinx | 3,278 | ||||
| 5962-9957401NUA | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, 27648-Cell, CMOS, PBGA560 RoHS : Not Compliant | 3,166 | |||
| 5962R9957401QXA | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, 27648-Cell, CMOS, CBGA560 RoHS : Not Compliant | 2,165 | |||
| 5962R9957401QXC | AMD Xilinx | Field Programmable Gate Array, 6144 CLBs, 1124022 Gates, CMOS, CBGA560 RoHS : Not Compliant | 1,596 | |||
| 5962-9957401QXX | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, CMOS, CBGA560 | 1,476 | |||
| 5962R9957401QXX | AMD Xilinx | Field Programmable Gate Array, 1124022 Gates, CMOS, CBGA560 | 1,394 | |||
![]() Win Source Electronics | PCA9574BS | Nexperia | 8-bit I2C-bus and SMBus, level translating, low voltage GPIO with reset and interrupt |
| 17,070 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |