| Electronic Components Datasheet Search |
|
9433 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 943323-000 | TE Connectivity | Multi-Conductor Cable 2Conductors 24AWG 2.71mm 600VAC White RoHS : Compliant |
| 3,100 | |
![]() Avnet Americas | M85049/43-32W | Glenair Inc | - Bulk (Alt: M85049/43-32W) RoHS : Not Compliant |
| 0 | |
| 2367943-3 | TE Connectivity | GI2.0EV VT SMT POTING HDR,NTL,KEY A,3P - Tape and Reel (Alt: 2367943-3) RoHS : Not Compliant |
| 0 | ||
| 19433-0014 | Molex | Connector Housing, Plug, 2 Contacts, 1 Row, 5.84 mm, 19433 Series, MX150L, -40 to 125 ?C, 8 AWG - Bulk (Alt: 0194330014) RoHS : Compliant |
| 0 | ||
| 1943340000 | Weidmüller Interface GmbH & Co. KG | Connector Wire to Board Male Header 18 Position 3.81mm Straight Solder Through Hole Orange Box - Bulk (Alt: 1943340000) RoHS : Not Compliant |
| 0 | ||
| 10-194336-59P | Amphenol Corporation | - Bulk (Alt: 10-194336-59P) RoHS : Not Compliant |
| 0 | ||
| 1279433000 | Weidmüller Interface GmbH & Co. KG | SAIL-M12G-8S30U - Bulk (Alt: 1279433000) RoHS : Not Compliant |
| 0 | ||
| G09-433A-019-L | Bel Fuse | - Trays (Alt: G09-433A-019-L) RoHS : Compliant |
| 0 | ||
| TSOP94338 | Vishay Intertechnologies | IR SENSOR IC 38KHZ,-e3 - Rail/Tube (Alt: TSOP94338) RoHS : Compliant |
| 0 | ||
| MAL226943391E3 | Vishay Intertechnologies | 390 UF 250V 25X30MM 105 C 3000H 3PIN - Boxed Product (Development Kits) (Alt: MAL226943391E3) RoHS : Compliant |
| 0 | ||
| 67-194332-64S | Amphenol Corporation | - Bulk (Alt: 67-194332-64S) RoHS : Not Compliant |
| 0 | ||
| 75-194336-54P | Amphenol Corporation | - Bulk (Alt: 75-194336-54P) RoHS : Not Compliant |
| 0 | ||
| 394337-E | TE Connectivity | Circular Connector Insert Pin 5 POS Solder - Trays (Alt: 394337-E) RoHS : Not Compliant |
| 0 | ||
| BFC247943393 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.039 uF, ? 5%, Through Hole, 160 V, 250 V - Bulk (Alt: BFC247943393) RoHS : Compliant |
| 0 | ||
| MKP1839433161 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, 0.33 uF, ? 1%, Through Hole, 100 V, 160 V, Axial Leaded - Bulk (Alt: MKP1839433161) RoHS : Compliant |
| 0 | ||
| MKP1839433404 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, 0.33 uF, ? 5%, Through Hole, 220 V, 400 V, Axial Leaded - Bulk (Alt: MKP1839433404) RoHS : Compliant |
| 0 | ||
![]() Newark | 2058943-3 | TE Connectivity | Cable Assbly, 6In, 4Way; |Te Connectivity 2058943-3 RoHS : Compliant |
| 4,371 | |
| 9433 060500 | Belden Inc | 40 #22 Pvc Pvc; |Belden 9433 060500 RoHS : Compliant |
| 2,000 | ||
| 9433 060100 | Belden Inc | Unshielded Multiconductor Cable 40 Condu; |Belden 9433 060100 RoHS : Compliant |
| 600 | ||
| MKP1839433124HQ | Vishay Intertechnologies | Film Capacitor, 0.33Uf, 1.25Kv, Axial; |Vishay MKP1839433124HQ RoHS : Compliant |
| 405 | ||
| ZW-26-09-G-T-294-335 | Samtec Inc | Conn Stack Brd, 2.54Mm, 78Pos, Hdr; |Samtec, Inc. ZW-26-09-G-T-294-335 RoHS : Compliant |
| 64 | ||
| A0394331 | Belden Inc | Cover:8In. For Organizer; |Belden A0394331 RoHS : Not Compliant |
| 54 | ||
| 943301001 | Belden Inc | Comp Cable, Rj11 Plug-Dsub 9P Socket, 5M; |Belden 943301001 RoHS : Compliant |
| 28 | ||
| MKP1839433404 | Vishay Intertechnologies | Cap, Film, Pp, 0.33Uf, 400V, Th; |Vishay MKP1839433404 RoHS : Compliant |
| 17 | ||
| 7032-9433 | Amphenol SV Microwave | Cable Assy, Smpm R/A Jack-Smpm Jack, 3"; Cable Length - Imperial:3"; Cable Length - Metric:76.2Mm; Coaxial Cable Type:0.047" Superflex; Connector Type A:Smpm Right Angle Jack; Connector Type B:Smpm Jack; Impedance:50Ohm Rohs Compliant: Yes RoHS : Compliant |
| 10 | ||
| 68.9433-28 | Stäubli Electrical Connectors | Test Probe Set, Isoprobe Iv 10:1 500Mhz; |Staubli 68.9433-28 RoHS : Compliant |
| 9 | ||
| 1943/3 BK003 | Alpha Wire | Cable, 14Awg, 3 Core, Black, 76.2M; |Alpha Wire 1943/3 BK003 RoHS : Compliant |
| 4 | ||
| 19433160757 | HARTING Technology Group | Heavy Duty Top, 16B, 1 Lever, Cable; Heavy Duty Connector Type:Hood, Top Entry; Connector Body Material:Nylon (Polyamide), Fibreglass Reinforced; Locking Type:1 Lever; Rectangular Shell Size:16B; Product Range:Han-Eco B Series Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
| 19433060296 | HARTING Technology Group | Heavy Duty Housing, 6B, 1 Lever, Cable; Heavy Duty Connector Type:Base, Cable Mount, Side Entry; Connector Body Material:Nylon (Polyamide), Fibreglass Reinforced; Locking Type:1 Lever; Rectangular Shell Size:6B Rohs Compliant: Yes |Harting 19433060296 RoHS : Compliant |
| 1 | ||
| FMCA2943-36 | Fairview Microwave Inc | Ra N Male-N Female Blkd Cbl Rg405; |Fairview Microwave FMCA2943-36 RoHS : Not Compliant |
| 1 | ||
| 9433 | Keystone Electronics Corp | Screw 6-32 X 3/16 Nylon; |Keystone 9433 RoHS : Compliant |
| 0 | ||
![]() RS | 19433-0001 (194330001) | Molex | MX150L 4 CIRCUIT PLUG FOR 10-12 AWG WIRE |
| 42 | |
| 165OR4A (7100169433) | 3M | TAPE, TEMFLEX VINYL ELECTRICAL 165, ORANGE, 3/4 IN X 60 FT (19 MM X 18 M) |
| 11 | ||
| 72968 (3094339) | Pomona Electronics | SMA T TYPE JACK (F) / JACK (F) / JACK (F) |
| 9 | ||
| 2494331 | RS Pro | PANEL MOUNT INDICATOR RED 24VDC LED, 8MM MOUNTING HOLE, WIRE LEADS IP67 |
| 6 | ||
| 2494338 | RS Pro | PANEL MOUNT INDICATOR, 2V DC, 8MM MOUNTING HOLE, WIRE TERMINATION, IP67, GREEN |
| 5 | ||
| 2494330 | RS Pro | GREEN 5MM LED PANEL MOUNT INDICATOR 24VDC, 8MM MOUNTING HOLE, LEAD WIRES, IP67 |
| 5 | ||
| 2494333 | RS Pro | PANEL MOUNT INDICATOR RED 24VDC LED, 8MM MOUNTING HOLE, WIRE LEADS IP67 |
| 5 | ||
| 19433160253 | HARTING Technology Group | RECTANGULAR CONNECTOR HOOD, SIZE 16 B, WT 328.00 G, CABLE ENTRY 1X M40 RoHS : Compliant |
| 5 | ||
| 2494332 | RS Pro | PANEL MOUNT INDICATOR RED 12VDC LED, 8MM MOUNTING HOLE, WIRE LEADS IP67 |
| 3 | ||
| 2494339 | RS Pro | GREEN 5MM LED PANEL MOUNT INDICATOR 12VDC, 8MM MOUNTING HOLE, LEAD WIRES, IP67 |
| 3 | ||
| SD-4-WD-7 (194332) | Festo | PLUG SOCKET, FOR DSMI SEMI ROTARY DRIVE |
| 3 | ||
| LV429433 | Schneider Electric | STANDARD MOTOR MECHANISM MODULE MT100/160, 100/160, 110/130VA |
| 1 | ||
| 9433 | Heyco | TERMINAL BLOCK, RAISED BASE, 300V, 30A, 12 POLES, WHITE |
| 0 | ||
| 9433 | Keystone Electronics Corp | SCREW, BINDING HEAD, 6-32 THREAD, .187 LENGTH, OD .282, MACHINE, NYLON 6/6 |
| 0 | ||
| 9433 | Chicago Pneumatic | BLADE ROTOR |
| 0 | ||
![]() Bisco Industries | 294-33-RC | MISC. RESISTORS | 2,164 | |||
| MS51943-32 | MS Nuts | 1,484 | ||||
| 94335A129 | MISC. SPACERS/STANDOFFS/HANDLES | 448 | ||||
| 0041-94336 | 195 | |||||
| MS51943-31 | MS Nuts | 80 | ||||
| ST9433-34 | Lyn-Tron Inc | 80 | ||||
| 5809-43-30 | Seastrom Mfg | 47 | ||||
| 9433K43 | SPRINGS | 2 | ||||
![]() Future Electronics | 9433 | Keystone Electronics Corp | RoHS : Compliant |
| 0 | |
| 9433 | Heyco | RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 30-9433 | GC Electronics | Cordless Tel Battery 3.6V RoHS : Compliant |
| 1 | |
| 9433 | Heyco | TB 2B FR WP-12P WHITE RoHS : Compliant |
| 0 | ||
| 9433 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| HE.9433 | Greenlee Textron Inc | Housing, Pump, Piston | Greenlee HE.9433 RoHS : Compliant |
| 0 | ||
| 9433-BULK | Belden Inc | RoHS : Compliant |
| 0 | ||
| 9433-0605000 | Belden Inc | Electronic, 40 Conductor 22AWG (7x30) Tinned Copper, PVC Insulation, PVC Outer Jacket, CMG RoHS : Compliant |
| 0 | ||
| 9433-060500 | Belden Inc | MULTI CONDUCTOR, 40 COND, 22AWG STRAND (7X30), PVC, CONTROL/INSTRUMENT/COMPUTER RoHS : Compliant |
| 0 | ||
| 7032-9433 | Amphenol SV Microwave | SMPM Female R/A to SMPM Female 3" Cable Assembly for .047 SuperFlex Cable RoHS : Compliant |
| 0 | ||
| 9433-0601000 | Belden Inc | MULTI CONDUCTOR, 40 COND, 22AWG STRAND (7X30), PVC, CONTROL/INSTRUMENT/COMPUTER RoHS : Compliant |
| 0 | ||
| 9433-060100 | Belden Inc | Audio Cable Polyvinyl Chloride 40Conductors 22AWG 11.55mm 300VAC Chrome Polyvinyl Chloride 30.48m Reel RoHS : Compliant |
| 0 | ||
| 9433-9113-000 | Radiall | SMA / STRAIGHT JACK RECEPTACLE FEMALE PASSIVATED RoHS : Compliant |
| 0 | ||
| 9433-CHR-3000 | Belden Inc | Electronic, 40 Conductor 22AWG (7x30) Tinned Copper, PVC Insulation, PVC Outer Jacket, CMG RoHS : Compliant |
| 0 | ||
| IULK2-9433-3 | Sensata Circuit Breakers | Cir Brkr Hyd Mag |Sensata/crydom IULK2-9433-3 RoHS : Compliant |
| 0 | ||
| 9433-060-3000 | Belden Inc | Electronic, 40 Conductor 22AWG (7x30) Tinned Copper, PVC Insulation, PVC Outer Jacket, CMG RoHS : Compliant |
| 0 | ||
| 9433-CHR-500 | Belden Inc | MULTI CONDUCTOR, 40 COND, 22AWG STRAND (7X30), PVC, CONTROL/INSTRUMENT/COMPUTER RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD9433BSVZ-105![]() | Analog Devices Inc | IC ADC 1 CONV 12Bits Pipelined Parallel 52-QFP Tray RoHS : Compliant |
| 501 | |
AD9433BSVZ-125![]() | Analog Devices Inc | IC ADC 1 CONV 12Bits Pipelined Parallel 52-QFP Tray RoHS : Compliant |
| 7 | ||
AD9433BSQZ-125![]() | Analog Devices Inc | IC ADC 1 CONV 12Bits Pipelined Parallel 52-QFP Tube RoHS : Compliant |
| 2,229 | ||
AD9433BSQ-105![]() | Analog Devices Inc | IC ADC 1 CONV 12Bits Pipelined Parallel 52-QFP Tube RoHS : Not Compliant |
| 503 | ||
AD9433BSQ-125![]() | Analog Devices Inc | IC ADC 1 CONV 12Bits Pipelined Parallel 52-QFP Tube RoHS : Not Compliant |
| 1,056 | ||
TPS79433DCQR![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, BICMOS, PDSO6 RoHS : Compliant |
| 655 | ||
TPS79433DGNT![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, BICMOS, PDSO8 RoHS : Compliant |
| 448 | ||
TPS79433DCQ![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, BICMOS, PDSO6 RoHS : Compliant |
| 14,598 | ||
TPS79433DCQG4![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 250mA SOT-223-6 Tube RoHS : Compliant |
| 130 | ||
| TPS79433QDCQRQ1 | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 250mA SOT-223-6 RoHS : Compliant |
| 4,000 | ||
![]() Sager | 9433 | Keystone Electronics Corp | Screws & Fasteners 3/16 6-32 NYLON BND |
| 0 | |
| 2367943-3 | TE Connectivity | GI2.0EV VT SMT POTING HDR,NTL,KEY A,3P RoHS : Compliant |
| 0 | ||
| 219-4-33292-6 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 0194330013 | Molex | Automotive Connectors MX150L PLG 01X02P 10-12AWG RoHS : Compliant |
| 0 | ||
| 259-4-33273-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-4-33292-7 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 249-4-33552-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 0194330014 | Molex | Automotive Connectors MX150L PLG 01X02P 8AWG RoHS : Compliant |
| 0 | ||
| P9-433129 | OTTO Engineering Inc | SEALED DOME PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| M55629/4-330 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 0 | |||
| SC0010(78800943371) | ABB Group | SC0010 (78-8009-4337-1) |
| 0 | ||
| 299-43-308-11-001000 | Mill-Max Mfg Corp | IC & Component Sockets 8 POS .3 R/ANGLE RoHS : Compliant |
| 0 | ||
| G09-433A-019-L | Bel Fuse | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 0 | ||
| 229-4-3351-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 1511194334 | Molex | Board to Board & Mezzanine Connectors MGrid Shrd Hdr RA TH /oPeg .75AuLF 34Ckt RoHS : Compliant | 0 | |||
![]() TME | 1943320000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 11A RoHS : Compliant |
| 3,731 | |
| 151119-4332 | Molex | Connector: PCB-cable/PCB; data; PIN: 32; 2mm; 2A; gold-plated; THT RoHS : Compliant |
| 1,080 | ||
| 9433170 | PCE | Transition: adapter; male/female; 16A; 230VAC; IEC 60309; IP20 |
| 3 | ||
| 381094-33-3 | ACV | Radio frame; Fiat; 2 DIN; black |
| 1 | ||
| 9433 | Keystone Electronics Corp | Screw; UNC 6-32; UNC6-32x4.75; Head: cheese head; slotted |
| 0 | ||
| 1279433000 | Weidmüller Interface GmbH & Co. KG | 1279433000 RoHS : Compliant |
| 0 | ||
| 10943 30 000 500 | RECA | Screw; M3; M3x30; Head: cheese head; hex key; HEX 2.5mm; ISO 4762 |
| 0 | ||
| 381094-33-2 | ACV | Radio frame; Fiat; 2 DIN; black gloss |
| 0 | ||
| 1894330000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 19A RoHS : Compliant |
| 0 | ||
| 1943390000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 17.5A RoHS : Compliant |
| 0 | ||
| 7000-74301-7943300 | Murrelektronik GmbH | Patch cord; Cat 5; RJ45 plug,both sides; 33m; stranded; Cu; PUR |
| 0 | ||
| 9-4338MR | KING TONY | Wrench-set; 6-angles,socket spanner; 1/2"; 38pcs. |
| 0 | ||
| 9994330000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 15A,18A RoHS : Compliant |
| 0 | ||
| 19433-0001 | Molex | Connector: automotive; plug; male; Automotive; MX150L; PIN: 4; IP67 RoHS : Compliant |
| 0 | ||
| 9433NAB | APEM Inc | Switch: push-button; Pos: 2; SPST-NO; 1A/30VDC; OFF-(ON); Ø6.5mm |
| 0 | ||
![]() Ameya Holding Limited | 9433 | Keystone Electronics Corp | MACH SCREW BINDING SLOTTED 6-32 | 9,127 | ||
![]() ComSIT USA | 2,99433E+15 | Mill-Max Mfg Corp | AVAILABLE EU | 224 | ||
| 9433040001 | MAQIM SA DE CV | AVAILABLE EU | 480 | |||
![]() ComSIT USA | SI9433DYT1 | Vishay Siliconix | P-CHANNEL MOSFET Small Signal Field-Effect Transistor, 5.4A I(D), 20V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 12,265 | ||
| 74408943330 | Wurth Elektronik | General Purpose Inductor, 33uH, 20%, 1 Element, SMD, 1919 RoHS : Compliant | 4,000 | |||
| SI9433BDYT1E3 | Vishay Intertechnologies | P-CHANNEL 20-V (D-S) MOSFET Small Signal Field-Effect Transistor, 4.5A I(D), 20V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,685 | |||
| SI9433BDYT1GE3 | Vishay Intertechnologies | P-CHANNEL 20-V (D-S) MOSFET Small Signal Field-Effect Transistor, 4.5A I(D), 20V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,500 | |||
| 9433NCDB | APEM Inc | MOMENTARY PUSHBUTTON SWITCH Pushbutton Switch, SPST, Momentary, 0.1A, 30VDC, Solder Terminal, Through Hole-straight RoHS : Compliant | 187 | |||
![]() Interstate Connecting Components | 299-43-320-11-001000 | Mill-Max Mfg Corp | RoHS : Compliant |
| 5 | |
| 2367943-3 | TE Connectivity | GI2.0EV VT SMT POTING HDR,NTL, RoHS : Compliant | 0 | |||
| 10-194336-59P | Amphenol Aerospace | RECEPT 10-194336-59P | 0 | |||
| M85049/43-32W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| 394335 | TE Connectivity | STVC/2 48 M ABC VVV 4-00 0606 | 0 | |||
| 943333-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCD-500-0455-2-613-160 RoHS : Compliant | 0 | |||
| 85909433911 | SOURIAU-SUNBANK | J59612 | 0 | |||
| 67-194332-64S | Amphenol Aerospace | RECEPT 67-194332-64S | 0 | |||
| 394337-E | TE Connectivity | M12 VERTICAL MALE DI 5-PIN SMT RoHS : Compliant |
| 0 | ||
| 659433-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A0111-22-45 RoHS : Compliant | 0 | |||
| 1-2367943-3 | TE Connectivity | GI2.0EV VT SMT POTING HDR,RED, RoHS : Compliant | 0 | |||
| 494335 | TE Connectivity | M12 MALE, A CODE, 5P, 10.5MM S | 0 | |||
| 10-194336-10S | Amphenol Aerospace | RECEPT 10-194336-10S | 0 | |||
| 10-194332-09P | Amphenol Aerospace | RECPT 10-194332-09P | 0 | |||
| 394-3309-017 | Amphenol Aerospace | PRINTED CIRCUIT BOARD | 0 | |||
![]() PEI Genesis | MDM97294-3391 | ITT Interconnect Solutions |
| 0 | ||
| S694-33-75R | SOURIAU-SUNBANK |
| 0 | |||
| M85049/43-32W | SOURIAU-SUNBANK |
| 0 | |||
| MDM97294-3393 | ITT Interconnect Solutions |
| 0 | |||
| S694-33-50R | SOURIAU-SUNBANK |
| 0 | |||
| S694-33-87R | SOURIAU-SUNBANK |
| 0 | |||
| MDM97294-3389 | ITT Interconnect Solutions |
| 0 | |||
| S694-337-44R | SOURIAU-SUNBANK |
| 0 | |||
| MDM97294-3394 | ITT Interconnect Solutions |
| 0 | |||
| S694-337-62R | SOURIAU-SUNBANK |
| 0 | |||
| S694-337-125R | SOURIAU-SUNBANK |
| 0 | |||
| CE9433-5 | ITT Interconnect Solutions |
| 0 | |||
| S694-337-28R | SOURIAU-SUNBANK |
| 0 | |||
| 943-32255-10002 | Amphenol Corporation |
| 0 | |||
| MDM97294-3342 | ITT Interconnect Solutions |
| 0 | |||
![]() PUI | 12.94335 | 3,671 | ||||
| 12.94339 | 2,100 | |||||
![]() Richardson RFPD | 10019433 | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 5V 0.4A 2W 7-Pin DIP SMD RoHS : Compliant |
| 0 | |
| SI5341B-D09433-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
AD9433BSVZ-105![]() | Analog Devices Inc | 1-Channel Single ADC Pipelined 105Msps 12-bit Para RoHS : Compliant |
| 0 | ||
| 9433-1113-000 | Radiall | Conn SMA F 50Ohm Solder ST Cable Mount Gold RoHS : Not Compliant |
| 0 | ||
| SI5341B-D09433-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
AD9433BSVZ-125![]() | Analog Devices Inc | 1-Channel Single ADC Pipelined 125Msps 12-bit Para RoHS : Compliant |
| 0 | ||
| 9433-9113-000 | Radiall | Conn SMA F 50Ohm Solder ST Cable Mount Gold RoHS : Not Compliant |
| 0 | ||
| 22649433 | HUBER+SUHNER | Conn MMCX 0Hz to 6GHz 50Ohm Solder RA Cable Mount RoHS : Compliant |
| 0 | ||
| R139433023 | Radiall | Conn Type F 0Hz to 3GHz 75Ohm ST Flange Mount RCP RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | FDS9433A | INSTOCK | 5,000 | |||
| SI9433BDY-T1-E3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 2,323 | |||
| 12.94339 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 2,100 | |||
| SI9433BDY-T1-E3 | INSTOCK | 656 | ||||
| 12.94335 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 371 | |||
| SCHOTT07999433 | INSTOCK | 210 | ||||
| SFH6943-3T | Infineon Technologies AG | INSTOCK | 122 | |||
| SI9433DY | INSTOCK | 71 | ||||
| 007LF04N9433 | INSTOCK | 23 | ||||
![]() Avnet Abacus | 394339-E | TE Connectivity | (Alt: 394339-E) RoHS : Compliant | 500 | ||
| 1709433 | Phoenix Contact | CC 25 2GF508 P26THRR32CLO CC252GF508P26THRR32CLO (Alt: 1709433) RoHS : Compliant | 0 | |||
| 394337-E | TE Connectivity | Circular Connector Insert Pin 5 POS Solder (Alt: 394337-E) RoHS : Compliant | 0 | |||
| 194330014 | Molex | Conn Housing PL 2 POS 762mm Crimp ST Bag (Alt: 194330014) RoHS : Compliant | 0 | |||
| 194330014 | Molex | Conn Housing PL 2 POS 762mm Crimp ST Bag (Alt: 194330014) RoHS : Compliant | 0 | |||
| 194330002 | Molex | Conn Housing PL 4 POS 762mm Crimp ST Bag (Alt: 194330002) RoHS : Compliant | 0 | |||
| 194330002 | Molex | Conn Housing PL 4 POS 762mm Crimp ST Bag (Alt: 194330002) RoHS : Compliant | 0 | |||
| 194330001 | Molex | Conn Housing PL 4 POS 762mm Crimp ST Bag (Alt: 194330001) RoHS : Compliant | 0 | |||
| 194330001 | Molex | Conn Housing PL 4 POS 762mm Crimp ST Bag (Alt: 194330001) RoHS : Compliant | 0 | |||
| 194330013 | Molex | Conn Housing PL 2 POS 762mm Crimp ST Bag (Alt: 194330013) RoHS : Compliant | 0 | |||
| 194330013 | Molex | Conn Housing PL 2 POS 762mm Crimp ST Bag (Alt: 194330013) RoHS : Compliant | 0 | |||
| 943333-000 | TE Connectivity | (Alt: 943333-000) RoHS : Not Compliant | 0 | |||
| 1794330000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 30 POS 35mm Solder RA ThruHole Box (Alt: 1794330000) RoHS : Compliant | 0 | |||
| MAL205943331E3 | Vishay Intertechnologies | Electrolytic Capacitor 330 uF 250 V 20 SnapIn 10000 hours 105C Polar 059 PLLSI Series (Alt: MAL205943331E3) RoHS : Compliant | 0 | |||
| MKP1839433134HQ | Vishay Intertechnologies | Power Film Capacitor Metallized PP 033 uF 5 Through Hole 450 V 16 kV Axial Leaded (Alt: MKP1839433134HQ) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 943323-000 | TE Connectivity | (Alt: 943323-000) RoHS : Compliant |
| 1 | |
| MKP1839433165 | Vishay Intertechnologies | (Alt: MKP1839433165) RoHS : Compliant | 0 | |||
| 394-3323-017 | Amphenol Corporation | AS,INSULATOR,4051722-323 (Alt: 394-3323-017) RoHS : Compliant | 0 | |||
| PJL9433A | PanJit Semiconductor | Transistor MOSFET P-CH 60V 3.2A 8-Pin SOP T/R (Alt: PJL9433A) RoHS : Compliant | 0 | |||
| 0194330013 | Molex | Connector Housing, Plug, 2 Contacts, 1 Row, 5.84 mm, 19433 Series, MX150L, -40 to 125 ?C (Alt: 0194330013) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 94334-5004 | Molex | IN STOCK SHIP TODAY RoHS : Compliant | 106,975 | ||
| 94337-5004 | Molex | IN STOCK SHIP TODAY |
| 106,975 | ||
| SI9433BDY-T1-E3 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 330 | ||
| SNP-9433 | Skynet Electronics | IN STOCK SHIP TODAY |
| 28 | ||
| A0394330 | Nordex | IN STOCK SHIP TODAY |
| 27 | ||
SI9433DY![]() | Vishay Siliconix | IN STOCK SHIP TODAY |
| 25 | ||
![]() EBV Elektronik | TSOP94338 | Vishay Intertechnologies | IR SENSOR IC 38KHZe3 (Alt: TSOP94338) RoHS : Compliant | 0 | ||
| BCM943362WCD4 | Broadcom Limited | Module 80211 2400MHz 20000Kbps (Alt: BCM943362WCD4) RoHS : Not Compliant | 0 | |||
![]() Master Electronics | CBM-979433B-135-540![]() | Same Sky | 12 V 860 mA 97 x 94 x 33 mm Dc Centrifugal Blower RoHS : Compliant |
| 269 | |
| 1943300 | Pomona Electronics | Cable Assembly Patch Cord 1.524m 18AWG Alligator Clip to Multi-Stacking Banana Plug RoHS : Compliant |
| 101 | ||
| 229-2-34943-30 | Sensata Circuit Breakers | Circuit Breaker Magnetic (Hydraulic Delay) - 2 Pole - 300VDC - 30A. RoHS : Compliant |
| 16 | ||
| 1943/3F-BLACK-250 | Alpha Wire | Black - 76.2m (250ft)/Spool RoHS : Compliant |
| 8 | ||
| PE9433 | Pasternack Enterprises | RoHS : Compliant |
| 5 | ||
| 2367943-3 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 19433-0014 | Molex | Conn Housing PL 2 POS 7.62mm Crimp ST Cable Mount MX150L™ Bag RoHS : Compliant |
| 0 | ||
| 1943340000 | Weidmüller Interface GmbH & Co. KG | 1943340000 - Weidmuller PCB Components SC 3.81/18/180F 3.2SN OR BX Sold in a pack of 24 RoHS : Compliant |
| 0 | ||
| 0194330014 | Molex | Conn Housing PL 2 POS 7.62mm Crimp ST Cable Mount MX150L™ Bag RoHS : Compliant |
| 0 | ||
| LELK11-39433-40 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| 943333-000 | TE Connectivity | D-500-0455-2-613-160 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 219-4-33292-5 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 4 Pole 209 Series | Sensata - Airpax 219-4-33292-5 RoHS : Compliant |
| 0 | ||
| 394337-E | TE Connectivity | M12 M 5 A * S * 201 10 5 094 * * * OKV 0 RoHS : Compliant |
| 0 | ||
| 5-6609943-3 | TE Connectivity | PSCS0DHXA=C3667 RoHS : Compliant |
| 0 | ||
| 659433-000 | TE Connectivity | 55A0111-22-45 MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W09433LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Low Loss Cable Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to TNC male low loss cable using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09433LF/HS can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09433LF/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W09433LF/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09433LF/HS can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 16,992 | ||
| PE3W09433LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to TNC male low loss cable 24 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 24 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09433LF/HS-24 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09433LF/HS-24 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W09433LF/HS-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09433LF/HS-24 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,923 | ||
| PE3W09433LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to TNC male low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09433LF/HS-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09433LF/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W09433LF/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09433LF/HS-12 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,921 | ||
| PE3W09433LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to TNC male low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09433LF/HS-36 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09433LF/HS-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W09433LF/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09433LF/HS-36 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,913 | ||
| PE39433 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50. SMA Female Bulkhead to SMA Male Cable Using PE-SR405FLJ Coax. PE39433 is a SMA female bulkhead to SMA male cable using PE-SR405FLJ coax. This Pasternack SMA female bulkhead to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE39433 SMA female bulkhead to SMA male cable assembly is constructed with PE-SR405FLJ coax. | 2,422 | |||
| PE3W09433LF/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to TNC Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to TNC male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W09433LF/HS-300 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09433LF/HS-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W09433LF/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09433LF/HS-300 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,314 | ||
| PE9433 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None. Precision SMA Male to N Female Adapter. SMA adapter PE9433 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to type N adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA male to type N female adapter is one of the many RF components that ship same day as they are ordered. PE9433 male SMA to female N type adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our male SMA to female type N adapter PE9433 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This SMA to N type radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. RoHS : Compliant |
| 693 | ||
| PE39433-9 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 9 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 9 Inch Length Using PE-SR405FLJ Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 9 inch length using PE-SR405FLJ coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 9 inch length using PE-SR405FLJ coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39433-9, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39433-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39433-9 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 9 inch length using PE-SR405FLJ coax, LF solder, RoHS. |
| 445 | ||
| PE39433-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 24 Inch Length Using PE-SR405FLJ Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 24 inch length using PE-SR405FLJ coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 24 inch length using PE-SR405FLJ coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39433-24, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39433-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39433-24 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 24 inch length using PE-SR405FLJ coax, LF solder, RoHS. |
| 445 | ||
| PE3C3943-36 | Pasternack Enterprises |
| 0 | |||
| PE3W09433 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-240-UF Coax. PE3W09433 is a TNC male to SMA male cable using LMR-240-UF coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09433 TNC male to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C9433/HS | Pasternack Enterprises | 0 | ||||
| PE3W09433/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W09433/HS is a TNC male to SMA male cable using LMR-240-UF coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09433/HS TNC male to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE37943-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C600, RF Cable Type: PE-C600, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Cable 36 Inch Length Using PE-C600 Coax., Radio frequency assembly N male to N male cable 36 inch length using PE-C600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male cable 36 inch length using PE-C600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE37943-36, can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE37943-36 is built with PE-C600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 36 inch length using PE-C600 coax. |
| 0 | ||
| PE3W19433/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to Reverse Polarity TNC Male Cable Using LMR-240-DB Coax with HeatShrink. PE3W19433/HS is a TNC male right angle to reverse polarity TNC male cable using LMR-240-DB coax. This Pasternack TNC male right angle to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19433/HS TNC male right angle to TNC reverse polarity male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | AD9433BST-80![]() | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PQFP52 RoHS : Not Compliant | 11,728 | ||
| 1943328 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,931 | |||
| 1943315 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,721 | |||
AD9433BSQZ-125![]() | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PQFP52 RoHS : Compliant | 10,116 | |||
| BCM943362WCD4 | Broadcom Limited | 9,757 | ||||
AD9433BSVZ-105![]() | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PQFP52 RoHS : Compliant | 9,661 | |||
| 1943302 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,059 | |||
TPS79433DGNTG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, BICMOS, PDSO8 RoHS : Compliant | 8,964 | |||
AD9433BSQZ-105![]() | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PQFP52 RoHS : Compliant | 8,636 | |||
LM2594-3.3MDC![]() | Texas Instruments | Switching Regulator, 1.4A, 173kHz Switching Freq-Max | 8,520 | |||
| BCM943341WCD1_EVB | Broadcom Limited | 7,851 | ||||
TPS79433DGNRG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, BICMOS, PDSO8 RoHS : Compliant | 7,293 | |||
| 1943373 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,264 | |||
AD9433BST-125![]() | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PQFP52 RoHS : Not Compliant | 7,205 | |||
| 2989433 | Phoenix Contact | Switches/Accessories RoHS : Compliant | 4,706 | |||
![]() Win Source Electronics | SI9433BDY-T1 | Vishay Huntington |
| 42,457 | ||
| SI9433BDY-T1-E3 | Vishay Huntington | Trans MOSFET P-CH 20V 4.5A 8-Pin SOIC N T/R / MOSFET P-CH 20V 4.5A 8-SOIC |
| 39,710 | ||
| SI9433BDY-T1-GE3 | Vishay Huntington | Trans MOSFET P-CH 20V 4.5A 8-Pin SOIC N T/R / MOSFET P-CH 20V 4.5A 8-SOIC |
| 39,140 | ||
TPS79433DGNRG4![]() | Texas Instruments | IC REG LDO 3.3V 0.25A 8MSOP RoHS : Compliant |
| 1,500 | ||
TPS79433DGNR![]() | Texas Instruments | IC REG LDO 3.3V 0.25A 8MSOP RoHS : Compliant |
| 1,204 | ||
TPS79433DGNT![]() | Texas Instruments | IC REG LDO 3.3V 0.25A 8MSOP RoHS : Compliant |
| 280 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |