 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
9427 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Verical | 94277-110LF | Amphenol FCi | Minitek® 2.00mm, Board/Wire to Board Connector, Unshrouded Right Angle Header, Through Hole, Double Row, 10 Position , 2.00mm (0.079in) Pitch RoHS : Compliant |
| 1,170 | |
 Arrow Electronics | 94277-110LF | Amphenol FCi | Minitek® 2.00mm, Board/Wire to Board Connector, Unshrouded Right Angle Header, Through Hole, Double Row, 10 Position , 2.00mm (0.079in) Pitch RoHS : Compliant |
| 1,170 | |
 Microchip Technology Inc | MG49427-1 | Microchip Technology Inc | EPI-DOWN GUNN DIODE PACKAGED, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
| MG49427-2 | Microchip Technology Inc | EPI-DOWN GUNN DIODE PACKAGED, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
 Bisco Industries | 10942750 LESS PLATING | BOLTS | 21 | |||
| ST9427-36 | Lyn-Tron Inc | 12 | ||||
| 9427 | Keystone Electronics Corp | 10 | ||||
| 2942742 | MISCELLANEOUS | 1 | ||||
 Future Electronics | 9427 | Keystone Electronics Corp | 1/4 4-40 NYLON BND Binding Head Slotted Screw RoHS : Compliant |
| 0 | |
 Onlinecomponents.com | HE.9427 | Greenlee Textron Inc | Spring, Compression | Greenlee HE.9427 RoHS : Compliant |
| 0 | |
| 9427-0101000 | Belden Inc | Portable Cordage, 16 Conductor 16AWG (65x34) Bare Copper, EPDM Insulation, CPE Outer Jacket, UL Type SO RoHS : Compliant |
| 0 | ||
| 9427-BLK-100 | Belden Inc | Multiconductor Cable - Unshielded - 16 Conductor - 16 AWG - 1000 ft (304.8 m). RoHS : Compliant |
| 0 | ||
| 9427-BLK-1000 | Belden Inc | Portable Cordage, 16 Conductor 16AWG (65x34) Bare Copper, EPDM Insulation, CPE Outer Jacket, UL Type SO RoHS : Compliant |
| 0 | ||
 Rochester Electronics | MAX9427EHJ | Maxim Integrated Products | Voltage Level Translator Unidirectional Non-Inverted 32-QFP RoHS : Not Compliant |
| 2,163 | |
 TME | 826942-7 | TE Connectivity | Connector: pin strips; pin header; male; data; PIN: 14; THT; Inom: 5A RoHS : Compliant |
| 5,410 | |
| 19427-0049 | Molex | Connector: wire-board; plug; male; Automotive; MX150; Inom: 18A |
| 2,261 | ||
| 794276-1 | TE Connectivity | Accessories: gasket for wire; PIN: 6; 6.35mm; 2x3; silicone RoHS : Compliant |
| 1,608 | ||
| 381094-27 | ACV | Radio frame; Citroën,Fiat,Peugeot; 2 DIN; black gloss |
| 6 | ||
| 9427 | Keystone Electronics Corp | Screw; UNC 4-40; UNC4-40x6.25; Head: cheese head; slotted |
| 0 | ||
| 1639427 | Phoenix Contact | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 12.5m; stranded RoHS : Compliant |
| 0 | ||
| 19427-0012 | Molex | Connector: wire-board; male; PIN: 12; right; for cable; THT; tinned |
| 0 | ||
| 94271 | HELUKABEL | Nut; PG9; polyamide 6; 22mm; light grey; Thread: PG; KMK-PA-OB |
| 0 | ||
| 10049427 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 12; SMT; 3A; 250V |
| 0 | ||
| 1942701 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 16A RoHS : Compliant |
| 0 | ||
| 2894270000 | Weidmüller Interface GmbH & Co. KG | Wemid; Body: beige RoHS : Compliant |
| 0 | ||
| 94274 | HELUKABEL | Nut; PG16; polyamide 6; 30mm; light grey; Thread: PG; KMK-PA-OB RoHS : Compliant |
| 0 | ||
| 9994270000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 15A,18A RoHS : Compliant |
| 0 | ||
| 94272 | HELUKABEL | Nut; PG11; polyamide 6; 24mm; light grey; Thread: PG; KMK-PA-OB RoHS : Compliant |
| 0 | ||
| 94273 | HELUKABEL | Nut; PG13,5; polyamide 6; 27mm; light grey; Thread: PG; KMK-PA-OB |
| 0 | ||
 ComSIT USA | 1594270000 | Weidmüller Interface GmbH & Co. KG | OMNIMATE RANGE-PITCH 5.08 MM SOCKET BLOCK Barrier Strip Terminal Block, 10A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 400 | ||
| 429427320916 | Adolf Wuerth Gmbh & Co Kg | WS-ROTU 10X10MM RIGHT ANGLE ROTARY SWITCH, 16 POSITION Rotary Coded Switch, 16 Positions, Circular, 0.15A, 24VDC, 6 PCB Hole Cnt, Solder Terminal, Rotary Actuator, Through Hole-right Angle RoHS : Compliant | 87 | |||
 PEI Genesis | 99427-40A-5 | ITT Interconnect Solutions |
| 0 | ||
| MDM97294-2734 | ITT Interconnect Solutions |
| 0 | |||
| 2910942-7 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | 12.94272 | 25,355 | ||||
| 12.94277 | 6,851 | |||||
| 12.94274 | 3,111 | |||||
| 12.94273 | 1,310 | |||||
| 12.94278 | 600 | |||||
| 12.89427 | 78 | |||||
 Richardson RFPD | 20019427-01 | TE Connectivity | Accelerometer Triple ±2000g 3.3V 0.63mV/g 12-Pin C RoHS : Compliant | 0 | ||
| 794277-1 | TE Connectivity | Connector Accessories Interfacial Seal Straight Si RoHS : Compliant | 0 | |||
| 20019427-00 | TE Connectivity | Accelerometer Triple ±2000g 3.3V 0.63mV/g 12-Pin L RoHS : Compliant |
| 0 | ||
 Rutronik | 194270032 | Molex | 04P MX150L HEADER ASS NO MTG HOLES RoHS : Compliant |
| 240 | |
 Chip 1 Exchange | 794272-1 | TE Connectivity | INSTOCK RoHS : Compliant | 95,262 | ||
| 794270-1 | TE Connectivity | INSTOCK RoHS : Compliant | 66,194 | |||
| 12.94272 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 25,355 | |||
| 794273-1 | TE Connectivity | INSTOCK RoHS : Compliant | 15,174 | |||
| 794279-1 | TE Connectivity | INSTOCK RoHS : Compliant | 14,401 | |||
| 794274-1 | TE Connectivity | INSTOCK RoHS : Compliant | 10,488 | |||
| 794277-1 | TE Connectivity | INSTOCK RoHS : Compliant | 9,201 | |||
| 12.94277 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 6,851 | |||
| C0603C820J5GAC39427 | KEMET Corporation | INSTOCK | 4,000 | |||
| 12.94274 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 3,111 | |||
| C0805C820J5GAC39427800 | KEMET Corporation | INSTOCK | 3,000 | |||
| 1394277-1 | TE Connectivity | INSTOCK RoHS : Compliant | 2,362 | |||
| 12.94273 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 1,310 | |||
| 12.94278 | Geyer Electronic E K | INSTOCK | 600 | |||
| 12.89427 | Geyer Electronic E K | INSTOCK | 78 | |||
 Avnet Abacus | 794274-1 | TE Connectivity | Connector Cable Seal 33 mm 4 Position Universal MATENLOK Sealed Connectors (Alt: 794274-1) RoHS : Compliant | 34,000 | ||
| 794270-1 | TE Connectivity | Connector Cable Seal 33 mm AMP 2 Position Universal MATENLOK Series Sealed Connectors (Alt: 794270-1) RoHS : Compliant | 28,000 | |||
| 794273-1 | TE Connectivity | Interface Seal for Universal MATENLOK Series 4 Position Sealed Connectors Silicone Rubber Blue (Alt: 794273-1) RoHS : Compliant | 26,000 | |||
| 794272-1 | TE Connectivity | Connector Cable Seal 33 mm AMP 3 Position Universal MATENLOK Series Sealed Connectors (Alt: 794272-1) RoHS : Compliant | 21,500 | |||
| 794277-1 | TE Connectivity | Connector Accessories Interface Seal 9 POS Silicon Rubber Blue (Alt: 794277-1) RoHS : Compliant | 18,000 | |||
| 1394277-1 | TE Connectivity | Dust Cap Cover Cover AMP Automotive Connectors (Alt: 1394277-1) RoHS : Compliant | 17,000 | |||
| 794279-1 | TE Connectivity | Connector Accessories Interface Seal (Alt: 794279-1) RoHS : Compliant | 12,000 | |||
| 794275-1 | TE Connectivity | Connector Accessories Interface Seal (Alt: 794275-1) RoHS : Compliant | 12,000 | |||
| 794271-1 | TE Connectivity | Interface Seal for Universal MATENLOK Series 3 Position Sealed Connectors Silicone Rubber Blue (Alt: 794271-1) RoHS : Compliant | 10,500 | |||
| 794278-1 | TE Connectivity | Connector Cable Seal 33 mm 9 Position Universal MATENLOK Sealed Connectors (Alt: 794278-1) RoHS : Compliant | 5,000 | |||
| 794276-1 | TE Connectivity | Connector Cable Seal 33 mm 6 Position Universal MATENLOK Sealed Connectors (Alt: 794276-1) RoHS : Compliant | 4,000 | |||
| 794278-1 | TE Connectivity | Connector Cable Seal 33 mm 9 Position Universal MATENLOK Sealed Connectors (Alt: 794278-1) RoHS : Compliant | 1,000 | |||
| 194270049 | Molex | (Alt: 194270049) RoHS : Compliant | 200 | |||
| 2942742 | Phoenix Contact | EMMP 70 EMMP70 (Alt: 2942742) RoHS : Compliant | 10 | |||
| MAL209427561E3 | Vishay Intertechnologies | 560uF 450V 35x50 105C 2000h (Alt: MAL209427561E3) RoHS : Compliant | 0 | |||
 Avnet Asia | 794274-1 | TE Connectivity | Connector Cable Seal, 3.3 mm, 4 Position Universal MATE-N-LOK Sealed Connectors (Alt: 794274-1) RoHS : Compliant | 0 | ||
| 794272-1 | TE Connectivity | Connector Cable Seal, 3.3 mm, AMP 3 Position Universal MATE-N-LOK Series Sealed Connectors (Alt: 794272-1) RoHS : Compliant |
| 0 | ||
| 794276-1 | TE Connectivity | (Alt: 794276-1) RoHS : Compliant | 0 | |||
| 794275-1 | TE Connectivity | (Alt: 794275-1) RoHS : Compliant | 0 | |||
| 0194270049 | Molex | (Alt: 0194270049) RoHS : Compliant | 0 | |||
| 794271-1 | TE Connectivity | (Alt: 794271-1) RoHS : Compliant |
| 0 | ||
0194270032 | Molex | (Alt: 0194270032) RoHS : Compliant | 0 | |||
 Avnet Silica | CXA1304-0000-000C0Y9427G | Cree, Inc. | XLAMP CXA LIGHT EMITTING DIODE WHITE (Alt: CXA1304-0000-000C0Y9427G) RoHS : Compliant | 0 | ||
| CXA1304-0000-000C0Y9427H | Cree, Inc. | XLAMP CXA LIGHT EMITTING DIODE WHITE (Alt: CXA1304-0000-000C0Y9427H) RoHS : Compliant | 0 | |||
| CXA1304-0000-000N0Y9427H | Cree, Inc. | XLAMP CXA LIGHT EMITTING DIODE WHITE (Alt: CXA1304-0000-000N0Y9427H) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 794278-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 475 | |
| 294-2.7R | Xicon Passive Components | IN STOCK SHIP TODAY |
| 400 | ||
| 94271-014 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Unknown | 289 | |||
| VJ9427Y224JXPAT | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 122 | ||
| 19427-0040 | Molex | IN STOCK SHIP TODAY |
| 80 | ||
| 0194270040 | Molex | IN STOCK SHIP TODAY |
| 80 | ||
| 794270-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 61 | ||
| 0942760L01 | IN STOCK SHIP TODAY | 6 | ||||
| THT-9-427-10 | Brady Worldwide Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 EBV Elektronik | XL710QDA1OCP 942748 | Intel Corporation | (Alt: 942748) RoHS : Compliant | 0 | ||
 FDH Electronics | PTL-19-427 | Brady Worldwide Inc | Harness Mgmt | 375 | ||
| 794278-1 | TE Connectivity | Connector Acc RoHS : Compliant |
| 19 | ||
| 5189427-002 | TE Connectivity | Circular Conn | 2 | |||
| 5189427-005 | TE Connectivity | Circular Conn | 0 | |||
| 85909427913 | SOURIAU-SUNBANK | Connector 38999 |
| 0 | ||
| 85909427911 | SOURIAU-SUNBANK | Connector 38999 |
| 0 | ||
| 5189427-004 | TE Connectivity | Circular Conn |
| 0 | ||
 Maritex | 794272-1 | TE Connectivity | Connectors Accessories; 794272-1; TE CONNECTIVITY; No; Blue; 3; 3 RoHS : Compliant |
| 26,133 | |
| 794271-1 | TE Connectivity | Connectors Accessories; 794271-1; TE CONNECTIVITY; No; Blue; 3; 3 RoHS : Compliant |
| 24,990 | ||
| 794274-1 | TE Connectivity | Connectors Accessories; 794274-1; TE CONNECTIVITY; No; Blue; 4; 4 RoHS : Compliant |
| 5,389 | ||
| 794277-1 | TE Connectivity | Connectors Accessories; 794277-1; TE CONNECTIVITY; 9; Blue; No; 9 RoHS : Compliant |
| 4,670 | ||
| 794278-1 | TE Connectivity | Connectors Accessories; 794278-1; TE CONNECTIVITY; 9; Blue; Unknown; 9 RoHS : Compliant |
| 530 | ||
| 794273-1 | TE Connectivity | Connectors Accessories; 794273-1; TE CONNECTIVITY; No; Blue; 4; 4 RoHS : Compliant |
| 13 | ||
 Pasternack Enterprises US | PE3C9427/HS | Pasternack Enterprises | 0 | |||
| PE3W19427/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to TNC Male Right Angle Cable Using LMR-240-DB Coax with HeatShrink. PE3W19427/HS is a reverse polarity TNC male to TNC male right angle cable using LMR-240-DB coax. This Pasternack reverse polarity TNC male to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19427/HS TNC reverse polarity male to TNC male right angle cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE39427/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 24 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 24 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE39427/HS-24 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE39427/HS-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39427/HS-24 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39427-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 12 Inch Length Using PE-SR402FL Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 12 inch length using PE-SR402FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 12 inch length using PE-SR402FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39427-12, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39427-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39427-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 12 inch length using PE-SR402FL coax, LF solder, RoHS. |
| 0 | ||
| PE3W09427 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to TNC Male Cable Using LMR-195 Coax. PE3W09427 is a reverse polarity SMA male right angle to TNC male cable using LMR-195 coax. This Pasternack reverse polarity SMA male right angle to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09427 SMA reverse polarity male right angle to TNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE39427/HS-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMA Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 9 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 9 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE39427/HS-9 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE39427/HS-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39427/HS-9 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39427-9 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 9 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 9 Inch Length Using PE-SR402FL Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 9 inch length using PE-SR402FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 9 inch length using PE-SR402FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39427-9, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39427-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39427-9 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 9 inch length using PE-SR402FL coax, LF solder, RoHS. |
| 0 | ||
| PE3W16942-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Female Bulkhead to N Female 4 Hole Flange Cable 72 Inch Length Using RG401 Coax., Radio frequency assembly N female bulkhead to N female 4 hole flange cable 72 inch length using RG401 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female 4 hole flange cable 72 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W16942-72 can also be known as a type N jack to type N jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Type N jack to type N jack cable assembly PE3W16942-72 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16942-72 can also be used in the other direction and will be a type N female 4 hole flange to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE39427-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 18 Inch Length Using PE-SR402FL Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 18 inch length using PE-SR402FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 18 inch length using PE-SR402FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39427-18, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39427-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39427-18 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 18 inch length using PE-SR402FL coax, LF solder, RoHS. |
| 0 | ||
| PE39427/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 12 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE39427/HS-12 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE39427/HS-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39427/HS-12 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39427 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable Using PE-SR402FL Coax, RoHS. PE39427 is a SMA male to SMA female bulkhead cable using PE-SR402FL coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE39427 SMA male to SMA female bulkhead cable assembly is constructed with PE-SR402FL coax. | 0 | |||
| PE9427 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. Precision N Male to N Male Adapter. Type N adapter PE9427 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our type N to type N adapter is a in-series coaxial adapter design. This 50 Ohm N type adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. Type N male to type N male adapter is one of the many RF components that ship same day as they are ordered. PE9427 male type N to male type N adapter has a straight body. This Pasternack straight type N coax adapter is a in-line RF adapter. Our male N type to male N type adapter PE9427 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This type N to type N radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
| PE39427/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE39427/HS-18 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE39427/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39427/HS-18 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39427LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using PE-SR402FL Coax, LF Solder. PE39427LF is a SMA male to SMA female bulkhead cable using PE-SR402FL coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE39427LF SMA male to SMA female bulkhead cable assembly is constructed with PE-SR402FL coax. | 0 | |||
| PE39427-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 6 Inch Length Using PE-SR402FL Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 6 inch length using PE-SR402FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 6 inch length using PE-SR402FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39427-6, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39427-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39427-6 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 6 inch length using PE-SR402FL coax, LF solder, RoHS. |
| 0 | ||
 TE Connectivity | 794274-1 | TE Connectivity | 04P UMNL WIRE SEAL Connector Seal & Plug Type: Wire Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Wire Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794274-1 | Internal Number: 794274-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 27,298 | |
| 794272-1 | TE Connectivity | 03P UMNL WIRE SEAL Connector Seal & Plug Type: Wire Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Wire Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794272-1 | Internal Number: 794272-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 23,702 | ||
| 794275-1 | TE Connectivity | 06P UMNL INTERFACE SEAL Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Interface Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794275-1 | Internal Number: 794275-1 | Alias Number: 0-0794275-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 11,010 | ||
| 794273-1 | TE Connectivity | 04P UMNL INTERFACE SEAL Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Interface Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794273-1 | Internal Number: 794273-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 10,457 | ||
| 794276-1 | TE Connectivity | 06P UMNL WIRE SEAL Connector Seal & Plug Type: Wire Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Wire Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794276-1 | Internal Number: 794276-1 | Alias Number: 0-0794276-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 9,442 | ||
| 794271-1 | TE Connectivity | 03P UMNL INTERFACE SEAL Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Interface Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794271-1 | Internal Number: 794271-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 8,790 | ||
| 794277-1 | TE Connectivity | 09P UMNL INTERFACE SEAL Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Interface Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794277-1 | Internal Number: 794277-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 7,548 | ||
| 794279-1 | TE Connectivity | 12P UMNL INTERFACE SEAL Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Interface Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794279-1 | Internal Number: 794279-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 3,675 | ||
| 794278-1 | TE Connectivity | 09P UMNL WIRE SEAL Connector Seal & Plug Type: Wire Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Wire Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794278-1 | Internal Number: 794278-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 2,920 | ||
| 826942-7 | TE Connectivity | 7P MOD2 STIFT LEI PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 14 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 826942-7 | Internal Number: 826942-7 | TE Connectivity RoHS : Compliant |
| 2,007 | ||
 Vyrian | THT-9-427-10 | Brady Worldwide Inc | Labeling Materials RoHS : Compliant | 13,540 | ||
| 1942769 | Phoenix Contact | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,088 | |||
| 1942743 | Phoenix Contact | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,599 | |||
| 1899427 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,412 | |||
| 1569427 | Phoenix Contact | Circular Connector, 4 Contact(s), Male, Plug RoHS : Compliant | 8,943 | |||
| 1679427 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 8,105 | |||
| 2942742 | Phoenix Contact | Mounting Bases/Accessories RoHS : Compliant | 7,503 | |||
| 1942701 | Phoenix Contact | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,737 | |||
| 1942730 | Phoenix Contact | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,728 | |||
| 1942727 | Phoenix Contact | Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,114 | |||
| 1909427 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,559 | |||
| 194270105 | Molex | Combination Line Connector, 8 Contact(s), Male, Solder Terminal RoHS : Compliant | 4,366 | |||
| 2509427-0001 | Texas Instruments | 3,642 | ||||
| 66.9427-22 | Staeubli Electrical Connectors Ag | Interconnection Device | 473 | |||
| 66.9427-21 | Staeubli Electrical Connectors Ag | Interconnection Device | 306 | |||
 Win Source Electronics | 794274-1 | TE Connectivity | CONN WIRE SEAL 4POS UMNL BLUE RoHS : Compliant |
| 205,500 | |
| 794272-1 | TE Connectivity | CONN WIRE SEAL 3POS UMNL BLUE / Connector Plug, Sealing For Universal MATE-N-LOK Series RoHS : Compliant |
| 156,000 | ||
| 794270-1 | TE Connectivity | CONN WIRE SEAL 2POS UMNL BLUE / Connector Plug, Sealing For Universal MATE-N-LOK Series RoHS : Compliant |
| 104,221 | ||
| 794276-1 | TE Connectivity | CONN WIRE SEAL 6POS UMNL BLUE / Connector Plug, Sealing For Universal MATE-N-LOK Series RoHS : Compliant |
| 49,261 | ||
| 794278-1 | TE Connectivity | CONN WIRE SEAL 9POS UMNL BLUE / Connector Plug, Sealing For Universal MATE-N-LOK Series RoHS : Compliant |
| 15,824 | ||
| 794279-1 | TE Connectivity | CONN INTERFACE SEAL 12POS UMNL / Connector Plug, Sealing For Universal MATE-N-LOK Series RoHS : Compliant |
| 90 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand