| Electronic Components Datasheet Search |
|
9162 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 9-1622826-6 | TE Connectivity | Res Thick Film 0402 75 Ohm 1% 0.063W(1/16W) ±200ppm/°C Pad SMD T/R RoHS : Exempt |
| 110,000 | |
| 9-1622826-8 | TE Connectivity | Res Thick Film 0402 91 Ohm 1% 0.063W(1/16W) ±200ppm/°C Pad SMD T/R RoHS : Exempt |
| 80,000 | ||
| 91627-2005 | Molex | Conn IDC Connector RCP 4 POS 5mm IDT RA Side Entry Cable Mount RoHS : Compliant |
| 37,600 | ||
| 9-1622826-5 | TE Connectivity | Res Thick Film 0402 68 Ohm 1% 0.063W(1/16W) ±200ppm/°C Pad SMD T/R RoHS : Exempt |
| 20,000 | ||
| 916275001 | Molex | Conn IDCConnector F 7 POS 5mm IDT RACable Mount Tray |
| 13,500 | ||
| 91627-0009 | Molex | Conn Wire to Board RCP 2 POS 5mm Solder Cable Mount Tray RoHS : Compliant |
| 9,485 | ||
| 9-1622826-5 | TE Connectivity | Res Thick Film 0402 68 Ohm 1% 0.063W(1/16W) ±200ppm/°C Pad SMD T/R RoHS : Exempt |
| 8,529 | ||
| 916271001 | Molex | Conn IDC Connector RCP 3 POS 5mm IDT RA Cable Mount Tray RoHS : Compliant |
| 3,615 | ||
| 9-1622796-3 | TE Connectivity | Res Thin Film 19.1K Ohm 0.1% 0.25W(1/4W) ±15ppm/°C Epoxy AXL Ammo RoHS : Compliant |
| 1,000 | ||
| 9-1622796-2 | TE Connectivity | Res Thin Film 196 Ohm 0.1% 0.25W(1/4W) ±15ppm/°C Epoxy AXL Ammo RoHS : Compliant |
| 1,000 | ||
| 9-1625966-5 | TE Connectivity | Res Wirewound 33Ohm 5% 8W/16W ±50ppm/°C Aluminum Housed Axial Loose/Tray RoHS : Compliant |
| 94 | ||
| 9-1625966-5 | TE Connectivity | Res Wirewound 33Ohm 5% 8W/16W ±50ppm/°C Aluminum Housed Axial Loose/Tray RoHS : Compliant |
| 44 | ||
| 916219-000 | TE Connectivity | Connector Accessories Bus/Stub Terminator Straight RoHS : Not Compliant |
| 30 | ||
| 916221-000 | TE Connectivity | Conn TNC 50Ohm PL RoHS : Not Compliant |
| 20 | ||
| 9-1625984-7 | TE Connectivity | Res Wirewound 330mOhm 5% 20W/50W ±50ppm/°C Aluminum Housed Axial Loose/Tray RoHS : Compliant |
| 14 | ||
![]() Avnet Americas | B39162B4327P810 | Qualcomm RFFE Filter Products | - Tape and Reel (Alt: B39162B4327P810) RoHS : Compliant |
| 95,000 | |
| 39-29-9162 | Molex | Pin Header, 16 Contacts, 2 Rows, 4.2mm, Tin, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT - Trays (Alt: 0039299162) RoHS : Compliant |
| 34 | ||
| R191620007 | Radiall | NEX10 MALE QUICK-LOCK - N FEMALE - Bulk (Alt: R191620007) RoHS : Compliant |
| 0 | ||
9-1625868-5![]() | TE Connectivity | SMD Chip Resistor, 51.1 Ohm, ? 0.1%, 250 mW, 0805 [2012 Metric], Thin Film, High Power Precision - Tape and Reel (Alt: 9-1625868-5) RoHS : Compliant |
| 0 | ||
| B39162B2634P810 | Qualcomm RFFE Filter Products | CSSP3 CU - Tape and Reel (Alt: B39162B2634P810) RoHS : Not Compliant | 0 | |||
| MAL225916221E3 | Vishay Intertechnologies | Cap Aluminum 220uF 400V 20% Snap-In Cylindrical 0.59Ohm 1410mA Box - Boxed Product (Development Kits) (Alt: MAL225916221E3) RoHS : Compliant |
| 0 | ||
| CC9162-000 | TE Connectivity | - Boxed Product (Development Kits) (Alt: CC9162-000) RoHS : Compliant |
| 0 | ||
| BFC236916274 | Vishay Intertechnologies | MKT 270nF ?5% 63Vdc P10mm e3 - Bulk (Alt: BFC236916274) RoHS : Not Compliant |
| 0 | ||
| DSC1001AE5-029.1621 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.1621MHz, 10PPM, 1.8-3.3V, -20 to 70C, 7.0 x 5.0mm - Rail/Tube (Alt: DSC1001AE5-029.1621) RoHS : Not Compliant |
| 0 | ||
| B39162B2618P810 | Qualcomm RFFE Filter Products | SAW Filters, Low Band Pass, 1.55905GHz to 1.60589GHz, 5 Pins, SMD - Tape and Reel (Alt: B39162B2618P810) RoHS : Compliant |
| 0 | ||
| CB39162V100 | Cvilux Corporation | - Trays (Alt: CB39162V100) RoHS : Not Compliant |
| 0 | ||
| 9-1624112-5 | TE Connectivity | Wirewound Inductor, 270 nH, 2.1 Ohm, ? 2%, 900 MHz, 200 mA, 0603 [1608 Metric] - Tape and Reel (Alt: 9-1624112-5) RoHS : Compliant |
| 0 | ||
| M83723/84916249 | Amphenol Corporation | - Bulk (Alt: M83723/84916249) RoHS : Not Compliant |
| 0 | ||
| M85049/16-23A | Amphenol Corporation | Quick Clamp for 38999 Series III/IV Circular Connector Right Angle Anodize Black - Bulk (Alt: A850491623A) RoHS : Not Compliant |
| 0 | ||
| M85049/16-21N | Amphenol Corporation | - Bulk (Alt: A850491621N) RoHS : Not Compliant |
| 0 | ||
![]() Arrow Electronics | 9-1622826-5 | TE Connectivity | Res Thick Film 0402 68 Ohm 1% 0.063W(1/16W) ±200ppm/°C Pad SMD T/R RoHS : Exempt | 8,529 | ||
| 9-1622826-6 | TE Connectivity | Res Thick Film 0402 75 Ohm 1% 0.063W(1/16W) ±200ppm/°C Pad SMD T/R RoHS : Exempt |
| 34 | ||
| 9-1625868-4 | TE Connectivity | Res Thin Film 0805 49.9 Ohm 0.1% 0.25W(1/4W) ±25ppm/°C Pad SMD T/R Medical RoHS : Compliant |
| 3 | ||
![]() Newark | 1-962916-2 | TE Connectivity | Rectangular Power Contact, Jpt Series, S; |Te Connectivity Amp 1-962916-2 RoHS : Compliant |
| 2,900 | |
TEA19162T/2J![]() | NXP Semiconductors | Pfc Ctrl, Soic, 134Khz-8; |NXP Semiconductors TEA19162T/2J RoHS : Compliant |
| 2,715 | ||
TEA19162T/2J![]() | NXP Semiconductors | Pfc Ctrl, Soic, 134Khz-8; |NXP Semiconductors TEA19162T/2J RoHS : Compliant |
| 2,715 | ||
| 75869-162LF | Amphenol Communications Solutions | Conn, Header, 50Pos, 2Row, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:2Rows; No. Of Contacts:50Contacts; Contact Termination Type:Through Hole Straight; Product Range:Quickie 75869 Series Rohs Compliant: Yes RoHS : Compliant |
| 1,193 | ||
| 39-29-9162 | Molex | Connector, Header, 16Pos, 2Row, 4.2Mm; |Molex 39-29-9162 (Alternate Part Number: 800753580015 RoHS : Compliant |
| 887 | ||
| RV1S9162ACCSP-100V#SC0 | Renesas Electronics Corporation | Optocoupler, Gate Drive, 3.75Kv, Sop-5; |Renesas Electronics Corporation RV1S9162ACCSP-100V#SC0 RoHS : Compliant |
| 510 | ||
| EXT-9162 | BUD Industries Inc | Metal Enclosure, Extruded, Small; |Bud Industries EXT-9162 RoHS : Compliant |
| 397 | ||
| PSG91623 | Pro-Signal | Lead, Usb A Male-Chassis A Female 1M; |Pro Signal PSG91623 (Alternate Part Number: 5051259205550 RoHS : Compliant |
| 395 | ||
| 2320916-2 | TE Connectivity | Automotive Housing, Rcpt, 6Pos, Key B; Product Range:Ampseal 16 High Temperature Series; Gender:Receptacle; No. Of Positions:6Positions; For Use With:Ampseal 16 Series Pin Contacts; Ip Rating:Ip67; Voltage Rating:250V Rohs Compliant: Yes RoHS : Compliant |
| 258 | ||
| PSG91622 | Pro-Signal | Computer Cable, Pro Signal Psg91622; |Pro Signal PSG91622 (Alternate Part Number: 5051259205543 RoHS : Compliant |
| 143 | ||
| 34691-6200 | Molex | Rectangular Power Connector, Stac64 3469; |Molex 34691-6200 (Alternate Part Number: 887191003764 RoHS : Compliant |
| 43 | ||
| T13X9162525-000 | TE Connectivity | Heavy Duty Conn, 1 Lever, Size H16A; |Te Connectivity T13X9162525-000 RoHS : Compliant |
| 29 | ||
| AD9162-FMC-EBZ | Analog Devices Inc | Evaluation Kit, Rf Dac, Data Converter; |Analog Devices, Inc. AD9162-FMC-EBZ RoHS : Compliant |
| 5 | ||
| 09162423101 | HARTING Technology Group | Heavy Duty Insert, Rcpt, 42+Pe, 2.5Mm2; |Harting 09162423101 RoHS : Compliant |
| 2 | ||
| 9162 | Abbatron | Spacer, Round, Nylon 6.6; |Abbatron Hh Smith 9162 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | AD9162-FMC-EBZ | Analog Devices Inc | AD9162 Eval brd 8x8mm FMC Mark RoHS : Compliant |
| 38 | |
| AD9162-FMCB-EBZ | Analog Devices Inc | 8x8 BGA Mini-Circuits AD9162 E RoHS : Compliant |
| 29 | ||
| AD9162-FMCC-EBZ | Analog Devices Inc | 11x11 BGA Mini Circuits AD9162 RoHS : Compliant |
| 19 | ||
![]() RS | 9-1625971-3 | TE Connectivity | ALUMINUM HOUSED SOLDER LUG WIRE WOUND PMNT RESISTOR, 12OHM +/-5% 25W RoHS : Compliant |
| 274 | |
| 09162423101 | HARTING Technology Group | FEMALE INSERT, 42+GROUND POSITION, CRIMP TERMINATION, HAN HMC SERIES RoHS : Compliant |
| 236 | ||
| 095-5863-09-162 | Dialight | MIN. PANEL IND. |
| 42 | ||
| 49-16-2573 | Milwaukee Electric Tool Corporation | TRAPSNAKE 25-FEET AUGER WITH CABLE DRIVE |
| 4 | ||
| 0829162 (UCT-TM 6 BU) | Phoenix Contact | MARKER FOR TERMINAL BLOCKS; BLUE; UNLABELED; UCT-TM 6 BU |
| 4 | ||
| 2454916 (25532537) (SSCIA0250175-100RS) | RS Pro | SCREW, 1/4-20 X 1 3/4 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 4 | ||
| 2451916 (25531100) (MPRI0-601000-100RS) | RS Pro | SCREW, #6-32 X 1 PHILLIPS ROUND MACHINE, ZINC PLATED |
| 4 | ||
| 49-16-2647 | Milwaukee Electric Tool Corporation | M18 CORDLESS 48-INCH GREASE GUN REPLACEMENT HOSE WITH HP COUPLER |
| 2 | ||
| 49-16-2717 | Milwaukee Electric Tool Corporation | M18 FUEL QUIK-LOK STRAIGHTING TRIMMER ATTACHMENT |
| 1 | ||
| 49-16-2663 | Milwaukee Electric Tool Corporation | EXACT 3/4-INCH PUNCH, MILWAUKEE KNOCKOUT SYSTEM |
| 1 | ||
| 49-16-2694 | Milwaukee Electric Tool Corporation | MILWAUKEE EXACT 1/2-INCH TO 2-INCH HAND RATCHET KNOCKOUT SET |
| 1 | ||
| 49-16-2722 | Milwaukee Electric Tool Corporation | SHOULDER STRAP FOR USE WITH 2725-20 AND 2825-20 |
| 1 | ||
| 49-16-2680 | Milwaukee Electric Tool Corporation | DRAW STUD, 7/16-INCH , MILWAUKEE KNOCKOUT SYSTEM |
| 1 | ||
| 9162 | HH Smith | SPACER; ROUND; NYLON; #2 ID; 3/16" OD; 1/4" LENGTH |
| 0 | ||
| 9162 | Apex Tool Group LLC | H.K. PORTER, PIVOT ARM BOLT FOR 9190 SERIES PNEUMATIC CUTTERS |
| 0 | ||
![]() Microchip Technology Inc | DSC1001AE5-029.1621 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.1621MHz, 10PPM, 1.8-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2045-11-21 RoHS : Compliant |
| 0 | |
| DSC1001AE5-029.1621T | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.1621MHz, 10PPM, 1.8-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2045-11-21 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | M22759/16-22-9 | MIL-SPEC Wire Cable Tubing Sleeve | 4,000 | |||
| CR9162-4-02 | Cherry Aerospace | 431 | ||||
| 10-916-2-035 | Staffall | 388 | ||||
| 1119162 | Unbrako Group | 375 | ||||
| 110-91-624-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 264 | |||
| M22759/16-22-0 | MIL-SPEC Wire Cable Tubing Sleeve | 200 | ||||
| 10-916-2-04 | Staffall | 130 | ||||
| 5612-91-62 | Seastrom Mfg | 121 | ||||
| 10-916-2-033 | Staffall | 90 | ||||
| CR9162-6-04 | Cherry Aerospace | 80 | ||||
| 232.09.1620S | MISC. FITTINGS/ELBOWS | 60 | ||||
| MS35691-626 | Greer Stop Nut Inc | 55 | ||||
| CR9162-6-05 | Cherry Aerospace | 40 | ||||
| 110-91-628-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 13 | |||
| CR9162-4-03 | Cherry Aerospace | 3 | ||||
![]() Future Electronics | 9162 | Heyco | RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 9162 | HH Smith | Nylon Round Spacer - 3/16" OD - #2 ID - 1/4" Length. RoHS : Compliant |
| 200 | |
| 9162 | Heyco | Countersink Type H Rivet, .122 Hole Dia., .19 Panel Thickness, Black | Heyco 9162 RoHS : Compliant |
| 0 | ||
| 9162-03 | Littelfuse Commercial Vehicle Products | SW BALL NO RoHS : Compliant |
| 0 | ||
| 0Z-9162 | GC Electronics | RoHS : Compliant |
| 0 | ||
| CAB.9162 | Taoglas Antenna Solutions | Coaxial Cable MHF1 to N-Type, 3.9" Length RoHS : Compliant |
| 0 | ||
| 34897-9162 | Molex | MINI50 RAHDR SMT 16CKT DKGY POL C TUBE RoHS : Compliant |
| 0 | ||
| 34691-9162 | Molex | STAC64 RA HDR 16 CKT BRN POL C TUBE RoHS : Compliant |
| 0 | ||
| 34825-9162 | Molex | MINI50 VHDR 16CKT DKGY POL C TUBE RoHS : Compliant |
| 0 | ||
| 34826-9162 | Molex | MINI50 RAHDR 16CKT DKGY POL C TUBE RoHS : Compliant |
| 0 | ||
| EXT-9162 | BUD Industries Inc | Metal Enclosure - 3.937" L x 2.244" W x 0.413" H (100.00mm x 57.00mm x 10.50mm) - Aluminum - Black. RoHS : Compliant |
| 0 | ||
| 30-9162 | Philmore | Switch Rotary ON OFF SPST 4 Flush Screwdriver Wire Lead 3A 250VAC RoHS : Compliant |
| 0 | ||
| 031-9162-000 | ITT Interconnect Solutions | 26482 - Style Series I & Mil Battery |Itt Cannon 0319162000 RoHS : Compliant |
| 0 | ||
| 22-26-9162 | Molex | 2.54mm KK® IDT Double Cantilever Contact, 16 Circuits, Tin (Sn), Feed-To, 24 Stranded, Solid, Fused, Topcoat, and 26 Fused and Topcoat, Green ID Stripe RoHS : Compliant |
| 0 | ||
| 15-38-9162 | Molex | 2.54mm Pitch SL™ FFC/FPC Connector - Single Row Male Version D, 16 Circuits RoHS : Compliant |
| 0 | ||
| 22-41-9162 | Molex | IDT 100 ASSY FDTO 16 CKT TIN RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | TEA19162T/2J![]() | NXP Semiconductors | Power Supply LLC, Resonant Converter Controller 8-SOIC T/R RoHS : Compliant |
| 50,000 | |
| TEA19162T/3J | NXP Semiconductors | Power Supply Power Supply Controller 8-SOIC T/R RoHS : Compliant |
| 90,000 | ||
5962-9162304MXC![]() | Texas Instruments | Digital Signal Processor Graphics Processor Host Interface, Multi-Processor 40MHz 145-PGA Tray RoHS : Compliant |
| 1 | ||
| ISL89162FBEBZ | Intersil Corporation | Gate Driver N-Channel MOSFET 2 Driver Low-Side 8-SOIC Tube RoHS : Compliant |
| 5 | ||
| ISL89162FRTAZ | Intersil Corporation | Gate Driver N-Channel MOSFET 2 Driver Low-Side 8-SON RoHS : Compliant |
| 847 | ||
| ISL89162FRTBZ | Intersil Corporation | Gate Driver N-Channel MOSFET 2 Driver Low-Side 8-SON RoHS : Compliant |
| 723 | ||
| SKY77916-21 | Skyworks Solutions Inc | RF Front End EDGE, GSM, LTE, TD-SCDMA 38-SMD RoHS : Compliant |
| 4,676 | ||
![]() Sager | 0916270010 | Molex | Power to the Board RoHS : Compliant | 0 | ||
| 7707219162 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9755916213 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758916218 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855819162 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855916236 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858916204 | Qnity Laird | Laird Technologies | 0 | |||
| 9863609162 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707119162 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 0916272003 | Molex | Power to the Board RoHS : Compliant | 0 | |||
| 9758916230 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855916203 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858916208 | Qnity Laird | Laird Technologies | 0 | |||
| 5749916-2 | TE Connectivity | D-Sub Backshells C CABLE CLAMP RoHS : Compliant | 0 | |||
| 0015916260 | Molex | CGRID SMT BKWY HDR TIN 26CKT TR | 0 | |||
![]() TME | 88916-202LF | Amphenol Corporation | Connector: DIN 41612; data; straight; THT |
| 5,583 | |
| 9-1622796-1 | TE Connectivity | Resistor: metal film; 196kΩ; 250mW; 15ppm/°C; axial; L: 6.3mm RoHS : Compliant |
| 2,000 | ||
| C20-747916-2103 | Amphenol Corporation | Connector: circular |
| 1,021 | ||
| 9-1625892-9 | TE Connectivity | Resistor: metal oxide; 36kΩ; THT; 3W; ±5%; Ø5.5x16mm; -55÷155°C RoHS : Compliant |
| 379 | ||
| 91623 | Goobay | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 5m; stranded; Cu |
| 7 | ||
| 91629 | Goobay | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 7.5m; stranded |
| 4 | ||
| DN-91624U-CR | Digitus | Patch panel; RACK; black; RJ45 socket x24; rack 19"; 1U; 19"; Cat 6 |
| 2 | ||
| DN-91624S-EC | Digitus | Patch panel; RACK; black; RJ45 socket x24; rack 19"; 1U; 19"; Cat 6 |
| 1 | ||
| 9162E | 3M | Dust respirator; FFP2 NR D; disposable,with valve |
| 0 | ||
| 9-1623746-5 | TE Connectivity | Resistor: wire-wound; 160mΩ; THT; 3W; ±1%; Ø6x13.5mm; axial; Ø: 6mm RoHS : Compliant |
| 0 | ||
| 1629162 | Phoenix Contact | Connector: M23; plug; PIN: 12; male; industrial; M23 PRO; 150V; N; 8A RoHS : Compliant |
| 0 | ||
| 91621 | Goobay | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 5m; stranded; Cu |
| 0 | ||
| 91621 | ProLinear/PONTECH Inc | Drill bit; for concrete; Ø: 16mm; L: 210mm; SDS-Plus® |
| 0 | ||
| 91621 | HELUKABEL | Protective tube; Size: 10; polyetylene; grey; narrow profile |
| 0 | ||
| 9-1625984-7 | TE Connectivity | Resistor: wire-wound; 330mΩ; with heatsink; screw; 50W; ±5%; 1.25kV RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TLV9162QDGKRQ1 | Texas Instruments | RoHS : Compliant | 297,144 | ||
| TLV9162SIRUGR | Texas Instruments | RoHS : Compliant | 100,778 | |||
| TLV9162IDDFR | Texas Instruments | RoHS : Compliant | 66,778 | |||
| TLV9162IDR | Texas Instruments | RoHS : Compliant | 40,182 | |||
| TLV9162IPWR | Texas Instruments | RoHS : Compliant | 20,120 | |||
![]() ComSIT USA | B39162B7775E510 | TDK Electronics | 1575.42 MHZ SAW GPS FILTER SAW Filter, 1 Function(s), 1575.42MHz, 4 Pin(s), Plastic RoHS : Compliant | 96,899 | ||
| B39162B7840C710S09 | TDK Electronics | Electronic Component RoHS : Compliant | 54,000 | |||
| B39162B3521U410 | epc | 1575.42 MHZ RF SAW FILTER SAW Filter, 1 Function(s), 1575.42MHz, 6 Pin(s) RoHS : Compliant | 41,942 | |||
| B39162B4060U810 | TDK Electronics | 1575.42 MHZ RF SAW FILTER SAW Filter, 1 Function(s), 1575.42MHz, 8 Pin(s), Ceramic RoHS : Compliant | 8,590 | |||
| B39162B3470H910 | TDK Electronics | 1575.42 MHZ SAW BAND-STOP FILTER SAW Filter, 2 Function(s), 1575.42MHz, 10 Pin(s) RoHS : Compliant | 7,404 | |||
| B39162B4327P810S85 | TDK Electronics | SAW filter, Epcos, 433.92 MHz, SMD package RoHS : Compliant | 5,000 | |||
| B39162B4340P810S85 | TDK Electronics | 832/1469.4/1575.42/1601.72 /2200 GPS/GLONASS EXTRACTOR SAW FILTER SAW Filter RoHS : Compliant | 1,200 | |||
| B39162B9416K610 | TDK Electronics | 1575.42 MHZ SAW FILTER SAW Filter, 1 Function(s), 1575.42MHz, 5 Pin(s), Plastic RoHS : Compliant | 635 | |||
| 916259846 | TE Connectivity | CHASSIS MOUNT RESISTOR Fixed Resistor, Wire Wound, 50W, 0.27ohm, 1250V, 5% +/-Tol, -50, 50ppm/Cel, Chassis Mount RoHS : Compliant | 199 | |||
![]() Interstate Connecting Components | 9-1623772-3 | TE Connectivity | C7 R51 5% AMMO PK RoHS : Compliant |
| 0 | |
9-1625868-5![]() | TE Connectivity | RP 2A 0.25W 51R1 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 9-1625999-0 | TE Connectivity | HSC100 800R 5% RoHS : Compliant |
| 0 | ||
| 006-0916-24 | TE Connectivity | 006-0916-24 | 0 | |||
| CC9162-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTMS-90-SCE-3/32-1 | 0 | |||
| 91-627460-11P | Amphenol Industrial Operations | 0 | ||||
| 91-628741-35S | Amphenol Aerospace | 0 | ||||
| 91-629825-35S | Amphenol Aerospace | 0 | ||||
| BN8K-1916-24PD-Y70 | Amphenol Aerospace | 0 | ||||
| 9-1622824-1 | TE Connectivity | RL73H 3A R51 1% 1K RL RoHS : Not Compliant |
| 0 | ||
| 9-1624112-9 | TE Connectivity | 3650 0603 82NH 2% 2K RL RoHS : Compliant |
| 0 | ||
9-1625867-1![]() | TE Connectivity | RP 1J 0.166W 54R9 0.1% 25PPM 1 RoHS : Compliant |
| 0 | ||
| 9-1625890-5 | TE Connectivity | 2W SM MOX 5% R22 RoHS : Compliant |
| 0 | ||
| 9-1625971-5 | TE Connectivity | HSA25 R01 10% RoHS : Compliant |
| 0 | ||
| 91-628744-35H | Amphenol Aerospace | 0 | ||||
![]() NexGen Digital | B39162B3913U410 | Qualcomm | 11,000 | |||
| B39162B7504L210 | RFM (Cirronet) | 4,475 | ||||
| B39162B3529U410 | Qualcomm | 22 | ||||
![]() PEI Genesis | AS22759/16-20-9 | Amphenol Corporation |
| 0 | ||
| 91-628746-35L | Amphenol Corporation |
| 0 | |||
| M85049/16-23A | Amphenol PCD |
| 0 | |||
| M85049/16-21N | Amphenol PCD |
| 0 | |||
| 10-524916-245 | Amphenol Corporation |
| 0 | |||
| 7916284-12 | SOURIAU-SUNBANK |
| 0 | |||
| S4916-2 | SOURIAU-SUNBANK |
| 0 | |||
| 7916284-10 | SOURIAU-SUNBANK |
| 0 | |||
| 46739-16/2 | ITT Interconnect Solutions |
| 0 | |||
| C10-597109-162 | Amphenol Corporation |
| 0 | |||
| 7916284-11 | SOURIAU-SUNBANK |
| 0 | |||
| 91-628754-35P | Amphenol Corporation |
| 0 | |||
| 27916-22T9 | ITT Interconnect Solutions |
| 0 | |||
| 46739-16/2C | ITT Interconnect Solutions |
| 0 | |||
| M85049/16-25A | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | 9-1622826-5 | TE Connectivity | Resistors RoHS : Compliant |
| 13,200 | |
| 88916-202LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 3,685 | ||
| 9-1625892-2 | TE Connectivity | Resistors RoHS : Compliant |
| 3,300 | ||
| 1623916-2 | TE Connectivity | Resistors RoHS : Compliant |
| 2,145 | ||
| C20-747916-2103 | Amphenol Corporation | Connector |
| 674 | ||
| 10-242999-162 | Amphenol Corporation | SLEEVE |
| 175 | ||
| 10-130969-162 | Amphenol Corporation | Connector |
| 44 | ||
| T13X9162525-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 37 | ||
| 9-1625984-7 | TE Connectivity | Resistors RoHS : Compliant |
| 13 | ||
| 9-1625984-0 | TE Connectivity | Resistors RoHS : Compliant |
| 11 | ||
| 9162003 | Hartmann Electronic | AERO RELAY/CONTACTOR 9162003 |
| 8 | ||
| 11191625-00 | TE Connectivity | SENSOR (TE REF 11191625-00) |
| 4 | ||
| P916-25-55 REV A | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 2 | ||
| 11191628-00 | TE Connectivity | SENSOR (TE REF 11191628-00) |
| 1 | ||
| CAT-MC-169-1620-FS-02 | Samtec Inc | High-Speed / RF Cable Assembly |
| 1 | ||
![]() PUI | 12.89162 | 21,038 | ||||
| 7916-26FHA | 562 | |||||
| 7916-26MBA | 140 | |||||
![]() Richardson RFPD | R191620007 | Radiall | R191620007 RoHS : Compliant |
| 0 | |
| B39162B2634P810 | RF360 Holdings Singapore Pte Ltd | Low-loss SAW RF Filter RoHS : Compliant |
| 0 | ||
| AD9162BBCAZ | Analog Devices Inc | DAC 1-CH Quad-Switch 16-bit 169-Pin CSP-BGA Tray RoHS : Compliant |
| 0 | ||
| B39162B4322P810 | RF360 Holdings Singapore Pte Ltd | SAW Filter Low Loss 844.5MHz/1575.42MHz/1601.72MHz RoHS : Compliant | 0 | |||
| B39162B4300F410 | RF360 Holdings Singapore Pte Ltd | BAND PASS FILTER RoHS : Compliant | 0 | |||
| B39162B2618P810 | RF360 Holdings Singapore Pte Ltd | SAW Filter RF 1582.47MHz 1.8dB 50Ohm SMD 5 Pin SMT RoHS : Compliant |
| 0 | ||
| R191620017 | Radiall | NEX10 FEMALE - 7/16 MALE RoHS : Compliant |
| 0 | ||
| B39162B3519U410 | RF360 Holdings Singapore Pte Ltd | SAW Filter RF 1585.5MHz 2.4dB 50Ohm SMD 6 Pin DCC6 RoHS : Compliant |
| 0 | ||
| B39162B3524B710 | RF360 Holdings Singapore Pte Ltd | SAW Filter RF 1575.42MHz 1.6dB 50Ohm SMD 4 Pin DCC RoHS : Compliant | 0 | |||
| B39162B4388P810 | RF360 Holdings Singapore Pte Ltd | CSSP3 CU RoHS : Compliant | 0 | |||
B39162B3520U410![]() | RF360 Holdings Singapore Pte Ltd | SAW Filter RF 1575.42MHz 1.8dB 50Ohm SMD 6 Pin DCC RoHS : Compliant | 0 | |||
| AD9162BBCARL | Analog Devices Inc | DAC 1-CH Quad-Switch 16-bit 169-Pin CSP-BGA T/R RoHS : Not Compliant |
| 0 | ||
| B39162B3423U410 | RF360 Holdings Singapore Pte Ltd | Low-loss SAW RF Filter RoHS : Compliant |
| 0 | ||
| B39162B3504U410 | RF360 Holdings Singapore Pte Ltd | SAW RF Filter RoHS : Compliant | 0 | |||
| B39162B4348P810 | RF360 Holdings Singapore Pte Ltd | SAW Filter RF 1582.47MHz 1.3dB 50Ohm//8.2nH SMD 5 RoHS : Compliant |
| 0 | ||
![]() Rutronik | 009162006301150 | Kyocera AVX Components | 06P SIM_Card Holder w/ LOCK. Hinge_Type RoHS : Compliant |
| 600 | |
![]() Chip 1 Exchange | 12.89162 | Geyer Electronic E K | INSTOCK | 20,938 | ||
| B39162B9877P810 | Qualcomm | INSTOCK | 12,206 | |||
| 115-91-628-41-003001 | INSTOCK | 11,656 | ||||
| B39162B4310P810 | Qualcomm | INSTOCK | 4,862 | |||
| B39162-B3913-U410 | TDK Electronics | INSTOCK | 4,014 | |||
| B39162-B3519-U410 | TDK Electronics | INSTOCK | 4,010 | |||
| B39162-B8878-P810-S05 | SAW | INSTOCK | 2,000 | |||
| DM19-162J | INSTOCK | 421 | ||||
| 69-99-162 | INSTOCK | 250 | ||||
| HY57V1291620TC-75DR | SK Hynix Inc | INSTOCK | 198 | |||
| 9162006206175 | INSTOCK | 120 | ||||
| 9-1625868-0 | INSTOCK | 79 | ||||
![]() Avnet Abacus | 1849162 | Phoenix Contact | LPC 1514STF381 LPC1514STF381 (Alt: 1849162) RoHS : Compliant | 0 | ||
| 50291620 | Molex | Conn Unshrouded Header HDR 8 POS 254mm Solder ST ThruHole Bag (Alt: 50291620) RoHS : Compliant | 0 | |||
| 50291620 | Molex | Conn Unshrouded Header HDR 8 POS 254mm Solder ST ThruHole Bag (Alt: 50291620) RoHS : Compliant | 0 | |||
| 22269162 | Molex | MLX22269162 (Alt: 22269162) RoHS : Compliant | 0 | |||
| 5749916-2 | TE Connectivity | (Alt: 5749916-2) RoHS : Compliant | 0 | |||
| 346916202 | Molex | (Alt: 346916202) RoHS : Compliant | 0 | |||
| 346916202 | Molex | (Alt: 346916202) RoHS : Compliant | 0 | |||
| 916271001 | Molex | Conn IDC Connector F 3 POS 5mm IDT RA Cable Mount Tray (Alt: 916271001) RoHS : Compliant | 0 | |||
| 916271001 | Molex | Conn IDC Connector F 3 POS 5mm IDT RA Cable Mount Tray (Alt: 916271001) RoHS : Compliant | 0 | |||
| 916277001 | Molex | AppliMate RAST 5 Power IDT Connector Female DirectIndirect 9 Circuits Open End Walls (Alt: 916277001) RoHS : Compliant | 0 | |||
| 916277001 | Molex | AppliMate RAST 5 Power IDT Connector Female DirectIndirect 9 Circuits Open End Walls (Alt: 916277001) RoHS : Compliant | 0 | |||
| 1891620000 | Weidmüller Interface GmbH & Co. KG | WDM1891620000 (Alt: 1891620000) RoHS : Compliant | 0 | |||
| 1-962916-2 | TE Connectivity | Contact PIN Crimp ST Cable Mount Strip (Alt: 1-962916-2) RoHS : Compliant | 0 | |||
| 9-1625971-3 | TE Connectivity | Resistor Wirewound 12 Ohm 5 25W 50ppmC Aluminum Housed Solder Lug TrayLoose (Alt: 9-1625971-3) RoHS : Compliant | 0 | |||
| 9-1622824-1 | TE Connectivity | SMD Current Sense Resistor 510 Milliohm 1 1 W 2512 6432 Metric Thick Film (Alt: 9-1622824-1) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | B39162B8920L210 | Qualcomm RFFE Filter Products | MICRO-ACOUSTIC DUAL EXTRACTOR (Alt: B39162B8920L210) RoHS : Compliant | 0 | ||
| B39162M5399D310W05 | Qualcomm RFFE Filter Products | RFCB39162M5399D310W05 AUTOMOTIVE SAW FIT (Alt: B39162M5399D310W05) RoHS : Compliant | 0 | |||
| B39162B2618P810 | Qualcomm RFFE Filter Products | SAW Filters, Low Band Pass, 1.55905GHz to 1.60589GHz, 5 Pins, SMD (Alt: B39162B2618P810) RoHS : Compliant |
| 0 | ||
| B39162B2618P810S85 | Qualcomm RFFE Filter Products | RFCB39162B2618P810S85 SAW FILTER (Alt: B39162B2618P810S85) RoHS : Compliant | 0 | |||
| B39162B8986L210 | Qualcomm RFFE Filter Products | GNSS L1 EXTRACRTOR,1109SIZE (Alt: B39162B8986L210) RoHS : Compliant | 0 | |||
| 0039299162 | Molex | Pin Header, 16 Contacts, 2 Rows, 4.2mm, Tin, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0039299162) RoHS : Compliant | 0 | |||
| B39162B2100L210 | Qualcomm RFFE Filter Products | (Alt: B39162B2100L210) RoHS : Compliant | 0 | |||
| B39162B3405H910 | Qualcomm RFFE Filter Products | (Alt: B39162B3405H910) RoHS : Compliant | 0 | |||
| B39162B3519U410 | Qualcomm RFFE Filter Products | SAW Filters, Low Band Pass, 1.565GHz to 1.606GHz, 6 Pins, SMD (Alt: B39162B3519U410) RoHS : Compliant | 0 | |||
| B39162B3504U410 | Qualcomm RFFE Filter Products | SAW FILTER GPS FOR AUTOMOTIVE (Alt: B39162B3504U410) RoHS : Compliant | 0 | |||
| B39162B4348P810 | Qualcomm RFFE Filter Products | SAW Filters, Low Band Pass, 1.55905GHz to 1.60589GHz, 5 Pins, SMD (Alt: B39162B4348P810) RoHS : Compliant | 0 | |||
| B39162B4393P810 | Qualcomm RFFE Filter Products | B39162B4393P810 (Alt: B39162B4393P810) RoHS : Compliant | 0 | |||
| B39162B8636P810 | Qualcomm RFFE Filter Products | (Alt: B39162B8636P810) RoHS : Compliant | 0 | |||
| B39162B9621P810 | Qualcomm RFFE Filter Products | (Alt: B39162B9621P810) RoHS : Compliant | 0 | |||
| B39162B4398P810 | Qualcomm RFFE Filter Products | (Alt: B39162B4398P810) RoHS : Compliant | 0 | |||
![]() Avnet Silica | B39162B4300F210 | Qualcomm RFFE Filter Products | SAW Filters Low Band Pass 157392GHz to 157692GHz 5 Pins SMD (Alt: B39162B4300F210) RoHS : Compliant | 5,000 | ||
TEA19162T/2J![]() | NXP Semiconductors | PFC Controller IC Burst Mode Discontinuous Conduction Mode QuasiResonant 70 V to 276 V 148 kHz 8 Pins SOIC (Alt: TEA19162T/2J) RoHS : Compliant | 0 | |||
| B39162B4322P810 | Qualcomm RFFE Filter Products | SAW Filters Band Stop Extractor 157342GHz to 160589GHz 9 Pins SMD (Alt: B39162B4322P810) RoHS : Compliant | 0 | |||
| B39162B2621P810 | Qualcomm RFFE Filter Products | SAW COMB FILTER AUTOMOTIVE 1511SIZE (Alt: B39162B2621P810) RoHS : Compliant | 0 | |||
| B39162B2618P810 | Qualcomm RFFE Filter Products | (Alt: B39162B2618P810) RoHS : Compliant | 0 | |||
| B39162B3519U410 | Qualcomm RFFE Filter Products | SAW Filters Low Band Pass 1565GHz to 1606GHz 6 Pins SMD (Alt: B39162B3519U410) RoHS : Compliant | 0 | |||
| B39162B3524B710 | Qualcomm RFFE Filter Products | SAW Filters Band Pass 157242GHz to 157842GHz 4 Pins SMD (Alt: B39162B3524B710) RoHS : Compliant | 0 | |||
| B39162B3520U410 | Qualcomm RFFE Filter Products | SAW Filters Band Pass 157422GHz to 157662GHz 6 Pins SMD (Alt: B39162B3520U410) RoHS : Compliant | 0 | |||
| B39162B3423U410 | Qualcomm RFFE Filter Products | RF DCC6C (Alt: B39162B3423U410) RoHS : Compliant | 0 | |||
| B39162B3504U410 | Qualcomm RFFE Filter Products | (Alt: B39162B3504U410) RoHS : Compliant | 0 | |||
| B39162B4348P810 | Qualcomm RFFE Filter Products | SAW Filters Low Band Pass 155905GHz to 160589GHz 5 Pins SMD (Alt: B39162B4348P810) RoHS : Compliant | 0 | |||
| B39162B4393P810 | Qualcomm RFFE Filter Products | B39162B4393P810 (Alt: B39162B4393P810) RoHS : Compliant | 0 | |||
| B39162B8636P810 | Qualcomm RFFE Filter Products | (Alt: B39162B8636P810) RoHS : Compliant | 0 | |||
| B39162B3414U510 | Qualcomm RFFE Filter Products | SAW Filters Low Band Pass 156542GHz to 160589GHz 6 Pins SMD (Alt: B39162B3414U510) RoHS : Compliant | 0 | |||
| B39162B9621P810 | Qualcomm RFFE Filter Products | SAW Filters Band Pass 1559052GHz to 160589GHz 5 Pins SMD (Alt: B39162B9621P810) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | CAB.9162 | Taoglas Antenna Solutions | Coaxial Cable MHF1 to N-Type, 3.9" Length |
| 0 | |
![]() Component Electronics, Inc | 916223-2 | TE Connectivity | IN STOCK SHIP TODAY |
| 358 | |
| 1-916227-8 | TE Connectivity | IN STOCK SHIP TODAY | 288 | |||
| NS19162-LQ2 | IN STOCK SHIP TODAY | 200 | ||||
| 110-91-624-41-001000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 166 | ||
| 916227-3 | TE Connectivity | IN STOCK SHIP TODAY |
| 123 | ||
| 747916-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 33 | ||
| 1-916227-2 | TE Connectivity | IN STOCK SHIP TODAY | 22 | |||
| B39162-B7840-C710-S09 | TDK Electronics | IN STOCK SHIP TODAY |
| 20 | ||
| 88916-214 | Amphenol FCi | IN STOCK SHIP TODAY |
| 19 | ||
| 39-29-9162 | TE Connectivity | IN STOCK SHIP TODAY |
| 6 | ||
| 009162006200175 | Kyocera AVX Components | IN STOCK SHIP TODAY |
| 5 | ||
| 916219-000 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| M22759/16-22-9 | Harbour Industries | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 9162 | Heyco | PRH 122-157 BLACK | 0 | ||
| RRWA-91622-110 | Essentra Components | 0 | ||||
| 47-91-621-24 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| E3-129-162 | Southco | E3-129-162 | 0 | |||
| 20591625 | Essentra Components | 12 UNF THREAD KNURLED CAPLDPE | 0 | |||
| RRWA-91628-110 | Essentra Components | 0 | ||||
| 53-16-916-24 | Southco | 0 | ||||
| 47-91-621-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 53-76-916-26 | Southco | These screws and captive screws provide an attractive polished finish and ample shaft length to mate with threaded receptacle on frame throughout a range of panel thicknesses. They are available with spring ejection to retract the screw body when threads | 0 | |||
| 47-91-621-64 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| E3-109-162 | Southco | E3-109-162 | 0 | |||
| EA-99-162 | Southco | 0 | ||||
| 47-91-621-21 | Southco | 47-91-621-21 | 0 | |||
| 47-91-621-20 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 9162F | Heyco | PRH 122-157 V-0 BLACK | 0 | |||
![]() EBV Elektronik | TEA19162T/2J![]() | NXP Semiconductors | PFC Controller IC Burst Mode Discontinuous Conduction Mode QuasiResonant 70 V to 276 V 148 kHz 8 Pins SOIC (Alt: TEA19162T/2J) RoHS : Compliant | 0 | ||
| TEA19162T/3J | NXP Semiconductors | (Alt: TEA19162T/3J) RoHS : Compliant | 0 | |||
| TEA19162CT/1J | NXP Semiconductors | Power Factor Correction PWM Controller 500KHz 8Pin SOIC (Alt: TEA19162CT/1J) RoHS : Compliant | 0 | |||
| CP19162_AMY-35-M-B2 | LEDIL | (Alt: CP19162_AMY-35-M-B2) RoHS : Compliant | 0 | |||
![]() ECCO | NB19162001-INCHES | TE Connectivity |
| 5,186 | ||
![]() FDH Electronics | LM-M22759/16-22-9-S5-2 | ELECTRO ENTERPRISES INC | Hook-Up Wire | 279,530 | ||
| EE22759/16-22-912 | Harbour Industries | Wire and Cable | 186,447 | |||
| EE22759/16-22-96 | Harbour Industries | Wire and Cable | 186,447 | |||
| LM-M22759/16-22-9-E20 | ELECTRO ENTERPRISES INC | Electrical Wire | 149,157 | |||
| M22759/16-20-64 | Whitmore/Wirenetics | Wire and Cable | 16,618 | |||
| M22759/16-20-68 | Whitmore/Wirenetics | Wire and Cable | 16,618 | |||
| M22759/16-20-29 | Whitmore/Wirenetics | Wire and Cable | 15,200 | |||
| M22759/16-22-20 | Whitmore/Wirenetics | Wire and Cable | 14,541 | |||
| M22759/16-22-63 | Whitmore/Wirenetics | Wire and Cable | 11,110 | |||
| EE22759/16-20-90 | Harbour Industries | Hook-Up Wire |
| 66 | ||
| M22759/16-22-978 | Helistrand Inc | Miscellaneous |
| 4 | ||
| M22759/16-24-0 | Harbour Industries | Hook-Up Wire | 0 | |||
| M22759/16-24-0 | Amphenol Cable & Interconnect Technologies | Hook-Up Wire | 0 | |||
| M85049/16-21N | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| M85049/16-21N | Amphenol PCD | Backshells & Ac |
| 0 | ||
![]() Flip Electronics | LXCL-KWS9-1622 | Lumileds | Stock, Ship Today |
| 1,537,000 | |
![]() Maritex | B39162B8813P810 | TDK Corporation | SAW Filters (Surface Acoustic Wave); B39162B8813P810; TDK RoHS : Compliant |
| 6,010 | |
| TEA19162T/2 | NXP Semiconductors | Power Management ICs (PMICs); TEA19162T/2; NXP SEMICONDUCTORS |
| 2,336 | ||
| 5-747916-2 | TE Connectivity | D-Sub Connectors; 5-747916-2; TE CONNECTIVITY; 37; Male; 69.4 mm; Straight RoHS : Compliant |
| 398 | ||
![]() Master Electronics | 9162 | HH Smith | Nylon Round Spacer - 3/16 OD - #2 ID - 1/4 Length. RoHS : Compliant |
| 200 | |
| 9-1623772-3 | TE Connectivity | C7 R51 5% AMMO PK MOQ Reduction RoHS : Compliant |
| 0 | ||
9-1625868-5![]() | TE Connectivity | RP 2A 0.25W 51R1 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1625999-0 | TE Connectivity | Power Resistor - 800 Ohms ±5% - 100W - Chassis Mount - Solder Lugs RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-219-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-209-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-109-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-149-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CC9162-000 | TE Connectivity | TMS-90-SCE-3/32-1 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 9-1625971-3 | TE Connectivity | Power Resistor - 12 Ohms ±5% - 25W - Chassis Mount - Solder Lugs RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-159-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-189-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-209-162 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 9-1622824-1 | TE Connectivity | RL73H 3A R51 1% 1K RL RoHS : Compliant |
| 0 | ||
| 9-1624112-9 | TE Connectivity | 3650 0603 82nH 2% 2K RL RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 2491620000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks LLFS 7.50/02/180V 5.0SN BK BX RoHS : Compliant |
| 50 | |
| 09162423101 | HARTING Technology Group | Heavy Duty Power Connectors Han 42DD- HMC-F-c RoHS : Compliant |
| 50 | ||
| 09149162001 | HARTING Technology Group | Heavy Duty Power Connectors HAN DOMINO 16P HD CUBE MA P.2 RoHS : Compliant |
| 50 | ||
| 09149162101 | HARTING Technology Group | Heavy Duty Power Connectors HAN DOMINO 16P HD CUBE FE P.2 RoHS : Compliant |
| 49 | ||
| 09162723001 | HARTING Technology Group | Heavy Duty Power Connectors Han 72DD- HMC-M-c RoHS : Compliant |
| 39 | ||
| 09162243101 | HARTING Technology Group | Heavy Duty Power Connectors Han 24DD- HMC-F-c RoHS : Compliant |
| 37 | ||
| 09162083101 | HARTING Technology Group | Heavy Duty Power Connectors Han 108DD- HMC-F-c RoHS : Compliant |
| 34 | ||
0031.9162![]() | Schurter Electronic Components | Fuse Holder FINGERGRIP 5 x 20mm QUICK SOLDER RoHS : Compliant |
| 15 | ||
| 1629162 | Phoenix Contact | Circular connector, cable connector, M23-12P1N8A8003S RoHS : Compliant |
| 1 | ||
| 5749916-2 | TE Connectivity | Hood D-Sub 37Pos Straight/120Deg AMP Polypropylene 0.255-0.550In.CblDia RoHS : Compliant |
| 0 | ||
| 1849162 | Phoenix Contact | Pluggable Terminal Blocks LPC 1,5/14-STF-3,81 RoHS : Compliant |
| 0 | ||
| 5-747916-2 | TE Connectivity | Conn D-Sub Cable Plug 37Pos STR HD-20Series 20AWG FullMetalShell RoHS : Compliant |
| 0 | ||
| 09162243001 | HARTING Technology Group | Heavy Duty Power Connectors Han 24DD- HMC-M-c RoHS : Compliant |
| 0 | ||
| 09162423001 | HARTING Technology Group | Heavy Duty Power Connectors Han 42DD- HMC-M-c RoHS : Compliant |
| 0 | ||
| TWAF-91620 | Jonard Tools | Wrenches TORQUE WRENCH, FULL 9/16, 20IN/LB |
| 0 | ||
![]() Pasternack Enterprises US | PE3W10916-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Female to TNC Male Low Loss Cable 24 Inch Length Using PE-P195 Coax., Radio frequency assembly TNC female to TNC male low loss cable 24 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female to TNC male low loss cable 24 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3W10916-24 can also be known as a low loss TNC jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10916-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our TNC female to TNC male cable has a maximum VSWR of 1.4:1. TNC jack to TNC plug cable assembly PE3W10916-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10916-24 can also be used in the other direction and will be a TNC male to TNC female cable assembly if the opposite connectivity is required. Low loss TNC jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 1,992 | |
| PE91625 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Female to 2.4mm Female Adapter, Stainless Steel, Engineering Grade. 2.92mm to 2.4mm engineering grade adapter PE91625 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. 2.92mm to 2.4mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm female to 2.4mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91625 female 2.92mm to female 2.4mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.84 in. length, 0.31 in. width and 0.006 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 2.4mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 289 | ||
| PE3C4916-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack 2 Hole Flange to TNC Male Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to TNC male cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to TNC male cable 24 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to TNC cable is a jack to male coax assembly, PE3C4916-24, can also be known as a BMA female to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to TNC plug cable assembly PE3C4916-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA jack 2 hole flange to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4916-24 can also be used in the other direction and will be TNC male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to TNC male cable 24 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE91620 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Female to 1.85mm Male Adapter, Stainless Steel, Engineering Grade. 2.92mm to 1.85mm engineering grade adapter PE91620 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a female to male gender configuration which provides easier connections in tighter spaces. 2.92mm to 1.85mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm female to 1.85mm male adapter is one of the many RF components that ship same business day as they are ordered. PE91620 female 2.92mm to male 1.85mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.89 in. length, 0.31 in. width and 0.008 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 1.85mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 82 | ||
| PE91621 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Female to 1.85mm Female Adapter, Stainless Steel, Engineering Grade. 2.92mm to 1.85mm engineering grade adapter PE91621 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. 2.92mm to 1.85mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm female to 1.85mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91621 female 2.92mm to female 1.85mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.86 in. length, 0.31 in. width and 0.06 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 1.85mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 67 | ||
| PE91624 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Female to 2.4mm Male Adapter, Stainless Steel, Engineering Grade. 2.92mm to 2.4mm engineering grade adapter PE91624 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a female to male gender configuration which provides easier connections in tighter spaces. 2.92mm to 2.4mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm female to 2.4mm male adapter is one of the many RF components that ship same business day as they are ordered. PE91624 female 2.92mm to male 2.4mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.93 in. length, 0.31 in. width and 0.008 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 2.4mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 41 | ||
| PE91623 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Male to 2.4mm Feamle Adapter, Stainless Steel, Engineering Grade. 2.92mm to 2.4mm engineering grade adapter PE91623 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a male to female gender configuration which provides easier connections in tighter spaces. 2.92mm to 2.4mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm male to 2.4mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91623 male 2.92mm to female 2.4mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.94 in. length, 0.31 in. width and 0.02 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This male RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 2.4mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 39 | ||
| PE3W02916-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to N Female 4 Hole Flange Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug to N female 4 hole flange cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to N female 4 hole flange cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and type N 4 hole flange cable connection on the other. Our reverse polarity SMA to type N cable assembly has plug gender on end 1 and female on end 2. PE3W02916-24 can also be known as a reverse polarity SMA male to type N jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to N type jack cable assembly PE3W02916-24 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W02916-24 RF cable are available on our downloadable PDF datasheet.PE3W02916-24 can also be used in the other direction and will be N type female 4 hole flange to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 31 | ||
| PE91622 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Male to 2.4mm Male Adapter, Stainless Steel, Engineering Grade. 2.92mm to 2.4mm engineering grade adapter PE91622 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a male to male gender configuration which provides easier connections in tighter spaces. 2.92mm to 2.4mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm male to 2.4mm male adapter is one of the many RF components that ship same business day as they are ordered. PE91622 male 2.92mm to male 2.4mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 1.02 in. length, 0.31 in. width and 0.01 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This male RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 2.4mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 11 | ||
| PE3916-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 24 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 24 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3916-24, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3916-24 is built with RG174 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 24 inch length using RG174 coax. |
| 0 | ||
| PE3C9162 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable Using Tinned RG405 Coax. PE3C9162 is a BMA plug bulkhead to BMA jack right angle 2 hole flange cable using RG405 Tinned coax. This Pasternack BMA plug bulkhead to BMA jack right angle 2 hole flange cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm BMA for connector 2. BMA to BMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug BMA bulkhead to jack BMA right angle2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9162 BMA plug bulkhead to BMA jack right angle 2 hole flange cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W09162 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Male Right Angle Cable Using Tinned RG402 Coax. PE3W09162 is a 2.92mm male to SMA male right angle cable using RG402 Tinned coax. This Pasternack 2.92mm male to SMA male right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09162 2.92mm male to SMA male right angle cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W19162 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Cable Using RG141 Coax. PE3W19162 is a SMA male to BNC female cable using RG141 coax. This Pasternack SMA male to BNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19162 SMA male to BNC female cable assembly is constructed with RG141 coax. | 0 | |||
| PE3C3916-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. HN Male to HN Male Right Angle Cable 24 Inch Length Using RG217 Coax., Radio frequency assembly HN male to HN male right angle cable 24 inch length using RG217 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male right angle cable 24 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle HN cable connection on the other. Our HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3C3916-24 can also be known as a HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to HN plug cable assembly PE3C3916-24 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C3916-24 RF cable are available on our downloadable PDF datasheet.PE3C3916-24 can also be used in the other direction and will be right angle HN male to HN male cable assembly if the opposite connectivity is required. HN plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 5-747916-2 | TE Connectivity | 37 Plug Solder Cup, Gold Flash Number of Positions: 37 Connector & Housing Type: Plug Connector System: Cable-to-Board Connector Mounting Type: Free-Hanging (In-Line) Connector Shell Size: 4 D-Shaped Connector | 37 Plug Cable-to-Board Free-Hanging (In-Line) | Part Number: 5-747916-2 | Internal Number: 5-747916-2 | Alias Number: 1364441 | TE Connectivity RoHS : Compliant |
| 5,160 | |
![]() Teledyne HiRel | 5962-9162901MYA | Teledyne HiRel | LINE RECEIVER, QUINT DIFFERENTIAL RoHS : Not Compliant | 0 | ||
| 5962-9162901MXA | Teledyne HiRel | LINE RECEIVER, QUINT DIFFERENTIAL RoHS : Not Compliant | 0 | |||
![]() Vyrian | 34691-6203 | Molex | Rectangular Power Connector, 20 Contact(s), Male, Solder Terminal RoHS : Compliant | 12,725 | ||
| 5749916-2 | TE Connectivity | Connector Accessory, 0.25in Min Cable Dia, 0.55in Max Cable Dia, Backshell, Polypropylene RoHS : Compliant | 12,147 | |||
| AD9162BBCARL | Analog Devices Inc | D/A Converter, 1 Func, Serial, Parallel, Word Input Loading, PBGA169 RoHS : Not Compliant | 11,053 | |||
5962-9162701MDA![]() | Texas Instruments | NAND Gate, AS Series, 4-Func, 2-Input, TTL, CDFP14 RoHS : Not Compliant | 9,403 | |||
5962-9162303MXC![]() | Texas Instruments | Graphics Processor, CMOS, CPGA145 RoHS : Compliant | 9,162 | |||
| AD9162-FMCB-EBZ | Analog Devices Inc | RoHS : Compliant | 9,058 | |||
5962-9162701M2X![]() | Texas Instruments | NAND Gate, AS Series, 4-Func, 2-Input, TTL, CQCC20 | 8,764 | |||
| 9162-0061 | Broadcom Limited | 7,713 | ||||
| AD9162BBCAZ | Analog Devices Inc | D/A Converter, 1 Func, Serial, Parallel, Word Input Loading, PBGA169 RoHS : Compliant | 6,493 | |||
| AD9162BBCA | Analog Devices Inc | D/A Converter, 1 Func, Serial, Parallel, Word Input Loading, PBGA169 RoHS : Not Compliant | 6,299 | |||
5962-9162701M2A![]() | Texas Instruments | NAND Gate, AS Series, 4-Func, 2-Input, TTL, CQCC20 RoHS : Not Compliant | 5,828 | |||
5962-9162701MCX![]() | Texas Instruments | NAND Gate, AS Series, 4-Func, 2-Input, TTL, CDIP14 | 5,754 | |||
5962-9162303MXA![]() | Texas Instruments | Graphics Processor, CMOS, CPGA145 RoHS : Not Compliant | 4,549 | |||
| 9162 | Littelfuse Inc | 3,985 | ||||
| 5962-9162304MXX | Texas Instruments | Graphics Processor, CMOS, CPGA145 | 3,579 | |||
![]() Win Source Electronics | DM9162IEP![]() | Davicom Semiconductor Inc | RoHS : Compliant |
| 150,000 | |
| B39162-B8813-P810-S05 | TDK Electronics |
| 118,790 | |||
| SKY77916-21 | Skyworks Solutions Inc | IC RF TXRX FEM MOD 38MCM / RF IC |
| 89,909 | ||
| B39162-B9444-M410-S05 | TDK Electronics |
| 40,829 | |||
| B39162B8813P810 | Qualcomm | Frequency RF SAW Filter (Surface Acoustic Wave) Bandwidth 5-SMD, No Lead |
| 20,250 | ||
| B39162B3913U410 | Qualcomm | FILTER SAW 1.588GHZ 6SMD |
| 17,666 | ||
| B39162-B8401-P810-S05 | TDK Electronics |
| 14,300 | |||
| TEA19162T/2 | Nexperia | PFC CONTROLLER / PFC IC |
| 10,000 | ||
| AD9162BBCAZ | Analog Devices Inc | IC DAC 16BIT A-OUT 169CSPBGA RoHS : Compliant |
| 109 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |