| Electronic Components Datasheet Search |
|
9148 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Future Electronics | 9148 | Heyco | RoHS : Compliant |
| 0 | |
![]() Verical | 91487-541LF | Amphenol FCi | Conn Housing RCP 12 POS 2.54mm Crimp ST Cable Mount Black Latch-N-Lok™ Bag RoHS : Compliant |
| 2,200 | |
| 9148732002 | TE Connectivity | Heat Shrink Tubing ST Cross-Linked Polyolefin White Thin Stick RoHS : Compliant |
| 570 | ||
| 91488-571LF | Amphenol FCi | 2x8 Cable Plug Connector Kit, Rear Exit, Standard Shield, Silver Gray RoHS : Compliant |
| 539 | ||
| 91486-122LF | Amphenol Corporation | Conn Housing F 8 POS Crimp RA Cable Mount Bag |
| 80 | ||
| 914896 | Weidmüller Interface GmbH & Co. KG | Conn Ejector Header/Terminal Block PL/PL 34 POS RoHS : Must Be Verified |
| 5 | ||
![]() Avnet Americas | 39-28-9148 | Molex | Pin Header, 14 Contacts, 2 Rows, 4.2mm, Gold, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT - Trays (Alt: 0039289148) RoHS : Compliant |
| 1,001 | |
| RLB0914-821KL | Bourns Inc | - Trays (Alt: RLB0914-821KL) RoHS : Compliant |
| 100 | ||
| 7914830000 | Weidmüller Interface GmbH & Co. KG | - Bag (Alt: 7914830000) RoHS : Compliant | 0 | |||
| EDU999LSSE1 914890 | Intel Corporation | (Alt: EDU999LSSE1 914890) RoHS : Not Compliant | 0 | |||
| XC9148A50CER-G | Torex Semiconductor LTD | DC / DC Switching Regulator, Fixed, 1 Output, Boost (Step Up), 650 mV to 6 V, USP-C, 6 Pins - Tape and Reel (Alt: XC9148A50CER-G) RoHS : Compliant |
| 0 | ||
| XC9148B36DER-G | Torex Semiconductor LTD | DCDC-StepUp - Tape and Reel (Alt: XC9148B36DER-G) RoHS : Compliant |
| 0 | ||
| XC9148C36CER-G | Torex Semiconductor LTD | DC / DC Switching Regulator, Fixed, 1 Output, Boost (Step Up), 650 mV to 6 V, USP-C, 6 Pins - Tape and Reel (Alt: XC9148C36CER-G) RoHS : Compliant |
| 0 | ||
| 11191489-00 | TE Connectivity | AST4600AG0200P3T1000:CTO-13000000-00 - Bag (Alt: 11191489-00) RoHS : Not Compliant |
| 0 | ||
| 9-1481643-3 | TE Connectivity | SLIDER, BLADE TRIM - Bulk (Alt: 9-1481643-3) RoHS : Not Compliant | 0 | |||
| 4-1609148-6 | TE Connectivity | - Bulk (Alt: 4-1609148-6) RoHS : Not Compliant | 0 | |||
| 7940109148 | Weidmüller Interface GmbH & Co. KG | QY-2-13-DM-U2-25 - Bulk (Alt: 7940109148) RoHS : Not Compliant |
| 0 | ||
| 9-1481641-7 | TE Connectivity | - Bulk (Alt: 9-1481641-7) RoHS : Compliant | 0 | |||
| M85049/148-10 | Glenair Inc | - Bulk (Alt: M85049/148-10) RoHS : Not Compliant |
| 0 | ||
| M85049/148-10 | Amphenol Corporation | - Bulk (Alt: A8504914810) RoHS : Not Compliant |
| 0 | ||
| 9-1481243-2 | TE Connectivity | - Bulk (Alt: 9-1481243-2) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | 91487-241LF | Amphenol Corporation | I/O Connectors L-N-L KIT, 2X6, W/O PV'S-91487-241LF RoHS : Compliant |
| 54 | |
| 80-001429 | Critical Link LLC | Development Boards & Kits - ARM Dev Kit with 5748-PJ-4AA-RI RoHS : Compliant |
| 2 | ||
| 80-001430 | Critical Link LLC | Development Boards & Kits - ARM Dev Kit with 5749-PM-4AA-RI RoHS : Compliant |
| 2 | ||
| 9148 | Heyco | Conduit Fittings & Accessories HF3C 3/4 BLK 3/4 NPT W/NUT RoHS : Compliant |
| 0 | ||
| 9148 | White-Rodgers | Liquid Cooling Connectors & Accessories THR SERIES TXV FLANGE, STRAIGHT THRU CONFIGURATION, INLET CONNECTION 1-1/8" ODM, OUTLET CONNECTION 1-1/8" ODM |
| 0 | ||
| 09692009148 | HARTING Technology Group | D-Sub Mixed Contact Connectors D SUB FE ANG 11W1 50Ohms PL3metal brac |
| 0 | ||
| 9148-9513-000 | Radiall | RF Connectors / Coaxial Connectors SMA / STRAIGHT JACK FEMALE PASSIVATED (INCLUDES 920-56) RoHS : Compliant |
| 0 | ||
| 80-001642 | Critical Link LLC | Development Boards & Kits - ARM MitySOM-AM62 Development Kit with 6252-TX-XXD-RI RoHS : Compliant |
| 0 | ||
| 91486 | Wiha Quality Tools | Tool Kits & Cases 12" CANVAS TOOL BAG RoHS : Compliant |
| 0 | ||
| 80-000286 | Critical Link LLC | Sockets & Adapters ADAPTER DEBU L138/1808/1810/6748 RoHS : Compliant |
| 0 | ||
| 91482 | Wiha Quality Tools | Tool Kits & Cases Cordura Electricians Belt Pouch |
| 0 | ||
| 91487 | Wiha Quality Tools | Tool Kits & Cases Cordura 16" Canvas Tool Bag |
| 0 | ||
| 80-000634 | Critical Link LLC | Development Boards & Kits - ARM DEV KIT WITH 3354-HX-X38-RC RoHS : Compliant |
| 0 | ||
| 80-001650 | Critical Link LLC | Development Boards & Kits - Other Processors MitySOM-C10L Development Kit with C10L-7N-3XX-RI RoHS : Compliant |
| 0 | ||
| 80-001694 | Critical Link LLC | Development Boards & Kits - Other Processors MitySOM-AM62 Development Kit with 6254-TX-XXD-RI RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 91487-541LF | Amphenol FCi | Conn Housing RCP 12 POS 2.54mm Crimp ST Cable Mount Black Latch-N-Lok™ Bag RoHS : Compliant |
| 2,200 | |
| 914830-E | TE Connectivity | Conn Terminal Block PL 16 POS Screw RA T DIN Rail RoHS : Must Be Verified |
| 60 | ||
![]() Newark | PSG91484 | Pro-Signal | Usb Cbl Type C Plug To Type C Plug 500Mm; |Pro Signal PSG91484 (Alternate Part Number: 5051259189973 RoHS : Compliant |
| 1,173 | |
| XC9148A50CER-G | Torex Semiconductor LTD | Dc/Dc Conv, Sync Boost, 1.2Mhz, Usp-6C-6; |Torex XC9148A50CER-G RoHS : Compliant |
| 822 | ||
| XC9148A50CER-G | Torex Semiconductor LTD | Dc/Dc Conv, Sync Boost, 1.2Mhz, Usp-6C-6; |Torex XC9148A50CER-G RoHS : Compliant |
| 822 | ||
| FMC00191-48 | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00191-48 RoHS : Not Compliant |
| 412 | ||
| 99-1486-812-08 | Franz Binder GmbH & Co | Socket, Free, 8Way; |Binder 99-1486-812-08 RoHS : Compliant |
| 199 | ||
| FMC00391-48 | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00391-48 RoHS : Not Compliant |
| 135 | ||
| PSG91489 | Pro-Signal | Lead, Usb2.0 Type C-Type C, White 0.5M; |Pro Signal PSG91489 (Alternate Part Number: 5051259190023 RoHS : Compliant |
| 126 | ||
| 9148 | Pro Elec | Trailing Socket, 2Way, White; |Pro Elec 9148 RoHS : Not Compliant |
| 80 | ||
| 09148811405 | HARTING Technology Group | Heavy Duty Insert, Plug, 4Pos, 4A; |Harting 09148811405 RoHS : Compliant |
| 33 | ||
| FMCA2791-48 | Fairview Microwave Inc | Tnc Male-Ra Tnc Male Cbl Rg402 In 48"; |Fairview Microwave FMCA2791-48 RoHS : Not Compliant |
| 13 | ||
AD9148BBCZ![]() | Analog Devices Inc | Da Converter, 16Bit, Csp-Bga-196; |Analog Devices, Inc. AD9148BBCZ RoHS : Compliant |
| 6 | ||
| 09148811405 | HARTING Technology Group | Heavy Duty Insert, Plug, 4Pos, 4A; Product Range:Han-Modular Series; Heavy Duty Connector Type:Insert; No. Of Contacts:4 Contacts; Rectangular Shell Size:-; Gender:Plug; Heavy Duty Contact Type:Crimp Pin - Contacts Not Supplied Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| 09148812805 | HARTING Technology Group | Heavy Duty Insert, Rcpt, 8Pos, 0.5A; Product Range:Han-Modular Series; Heavy Duty Connector Type:Insert; No. Of Contacts:8 Contacts; Rectangular Shell Size:-; Gender:Receptacle; Current Rating:500Ma Rohs Compliant: Yes |Harting 09148812805 RoHS : Compliant |
| 3 | ||
| 09148812805 | HARTING Technology Group | Heavy Duty Insert, Socket, 8Pos, 0.5A; |Harting 09148812805 RoHS : Compliant |
| 1 | ||
| 9148 | Abbatron | Standoff, Brass, 4-40; |Abbatron Hh Smith 9148 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | AD9148BBCZRL![]() | Analog Devices Inc | 16 Bit Quad DAC W/O Heat Sprea RoHS : Compliant |
| 4,500 | |
AD9148BBCZ![]() | Analog Devices Inc | 16 Bit Quad DAC W/O Heat Sprea RoHS : Compliant |
| 308 | ||
AD9148BBPZ![]() | Analog Devices Inc | 16 Bit Quad DAC RoHS : Compliant |
| 13 | ||
| AD9148-M5375-EBZ | Analog Devices Inc | 16 Bit Quad DAC RoHS : Compliant |
| 10 | ||
| AD9148-EBZ | Analog Devices Inc | 16 Bit Quad DAC RoHS : Compliant |
| 5 | ||
AD9148BBPZRL![]() | Analog Devices Inc | 16 Bit Quad DAC RoHS : Compliant |
| 0 | ||
![]() RS | 9148 | Heyco | FITTING, NYLON 6/6, BLACK, LENGTH 1.8400 IN, HF3C SERIES |
| 378 | |
| 1291485 | Phoenix Contact | PTV 2 5 GN RoHS : Compliant |
| 50 | ||
| MS4-LFR-1/4-D6-ERM-AS (529148) | Festo | FILTER REGULATOR, G 1/4, 40 MICRON, 0.08 TO 1.4 MPA, 1700L/MIN, MS SERIES |
| 24 | ||
| VAVC-Q2-M22U-15-E (3019148) | Festo | SEAL CARTRIDGE FOR VZQA SERIES PINCH VALVES, VAVC-Q2-M22U-15-E |
| 19 | ||
| 5309 148 | Altech Corporation | CABLE GLAND, POLYAMIDE 6, LIGHT GREY, IP67 PROTECTION, PG 48 OUTER THREAD |
| 10 | ||
| N091483 | Mersen Electrical Power | FUSEHOLDER, FERRULE,6 X 32MM,32A,690VAC |
| 6 | ||
| 9148 | White-Rodgers | T-SERIES THR FLANGE 1-1/8 |
| 5 | ||
| 3049148 (RT 8 BU) | Phoenix Contact | FEED-THROUGTERM BLOCK W/BOLT CONN TYPEAWG:14-2;W 20.2MM;BLUE |
| 5 | ||
| 2391481-2 | TE Connectivity | PORTABLE CRIMP TOOL, INTERCHANGEABLE, DIE SET, SDE F FEMALE 18-20 DIE SET |
| 4 | ||
| 4897-0 (1914868) | Pomona Electronics | BANANA JACK BANANA PLUG 15 A BLACK BERYLLIUM COPPER 5000 VRMS (MAX.) |
| 4 | ||
| 4898-0 (1914887) | Pomona Electronics | CONNECTOR PLUG 15 A BLACK BRASS BERYLLIUM COPPER 5000 V (RMS) (MAX.) |
| 1 | ||
| 802914 (802914 CX/500) | HELUKABEL | MULTICONDUCTOR CABLES, TINNED COPPER, POLYETHYLENE INSULATED CORES, POLYVINYLCHL |
| 1 | ||
| 09148811805 (09 14 881 1805) | HARTING Technology Group | MODULAR INSERT CONNECTOR, MALE, X CODED, LIQUID CRYSTAL POLYMER, 0.5A, 32V, 8P |
| 1 | ||
| 09148812405 (09 14 881 2405) | HARTING Technology Group | M12 MODULAR INSERT, FEMALE, LIQUID CRYSTAL POLYMER, D CODED, 4 CONTACTS, CRIMP |
| 1 | ||
| 9148 | HH Smith | STANDOFF; HEX; BRASS; 4-40 THREAD; 3/16" OD; 5/16" LENGTH; FULL THREAD |
| 0 | ||
![]() Bisco Industries | 914-8618-02-01-00 | Cambion Electronics Ltd | 2,499 | |||
| 9148 | Abbatron | 760 | ||||
| CS9148S-06-2-2 | Fastener Innovation Technology | 389 | ||||
| 9148 | Heyco | 194 | ||||
| M1-20-91-48 | Southco | 29 | ||||
| AS3209-148 | AS O-RINGS | 26 | ||||
| CS9148S-3-5-C | Fastener Innovation Technology | 21 | ||||
| CS9148S-06-2-B | Fastener Innovation Technology | 5 | ||||
| CS9148S-06-B-2 | Fastener Innovation Technology | 3 | ||||
| SS-3914-832-12 | Globe Electronic Hardware Inc | 1 | ||||
![]() Onlinecomponents.com | 9148 | Heyco | HF3C 3/4 BLACKW/8465 NUT RoHS : Compliant |
| 0 | |
| 9148 | Woodhead Molex | RoHS : Compliant |
| 0 | ||
| 9148 | HH Smith | Brass Hex Standoff - 4-40 Thread - 3/16" OD - 5/16" Length. RoHS : Compliant |
| 0 | ||
| 9148 | White-Rodgers | RoHS : Compliant |
| 0 | ||
| 84854-9148 | Molex | MIC-C PLG RA MALE/RA FEM THIN DEVNT 16FT RoHS : Compliant |
| 0 | ||
| 42-9148 | Woodhead Molex | MAX-LOC GRIP-MACH F3 .687-.812 RoHS : Compliant |
| 0 | ||
| 35-9148 | Ideal Industries Inc | SLOTTED 3/32 X 3 INSULAT RoHS : Compliant |
| 0 | ||
| 9148-1 | White-Rodgers | RoHS : Compliant |
| 0 | ||
| 9804-9148 | Siemens | TALON HQ-13T MTG DEV W/CP RoHS : Compliant |
| 0 | ||
| 9148-9513-000 | Radiall | SMA / STRAIGHT JACK FEMALE PASSIVATED (INCLUDES 920-56) RoHS : Compliant |
| 0 | ||
| 22-47-9148 | Molex | KK 100 HDR FLAT VERT TIN 14CKT RoHS : Compliant |
| 0 | ||
| 39-28-9148 | Molex | Conn Power HDR 14 POS 4.2mm Solder ST Thru-Hole 14 Terminal 1 Port Mini-Fit Jr™ Tray RoHS : Compliant |
| 0 | ||
| 22-28-9148 | Molex | KK 100 Hdr Assy RA Bkwy 14 Ckt 15 SGold RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | CY91486PMC-G-107E1 | Infineon Technologies AG | 32bit Legacy MCU |
| 31,850 | |
AD9148BBCZ![]() | Analog Devices Inc | IC DAC 4 CONV 16Bits Multiplying DAC LVDS - Parallel, SPI 196-BGA Tray RoHS : Compliant |
| 3,012 | ||
AD9148BBCZRL![]() | Analog Devices Inc | IC DAC 4 CONV 16Bits Multiplying DAC LVDS - Parallel, SPI 196-BGA T/R RoHS : Compliant |
| 34,339 | ||
![]() Sager | 7707019148 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| CA1-B9-14-810-A21-MJ | Carling Technologies | Circuit Breakers CA1B914810A21MJ RoHS : Compliant | 0 | |||
| 9733009148 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9762119148 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9811109148 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855619148 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| FT91482F | TE Connectivity | TE Connectivity | 0 | |||
| CC9148-000 | TE Connectivity | Wire Labels & Markers TMS-90-SCE-3/16-6 |
| 0 | ||
| CA2-B9-14-810-3B1-MG | Carling Technologies | Circuit Breakers CA2B9148103B1MG RoHS : Compliant | 0 | |||
| 1291488 | Phoenix Contact | Fixed Terminal Blocks PTV 2 5 OG RoHS : Compliant |
| 0 | ||
| 11191489-00 | TE Connectivity | AST4600AG0200P3T1000:CTO-13000000-00 |
| 0 | ||
| 0422691481 | Molex | Molex | 0 | |||
| 1914836 | Phoenix Contact | Pluggable Terminal Blocks 3 Pos 5mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 1914881 | Phoenix Contact | Pluggable Terminal Blocks 5 Pos 5mm pitch Press In Header RoHS : Compliant | 0 | |||
| 9857209148 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | D2AW9148G | OMRON Corporation | Microswitch SNAP ACTION |
| 387 | |
| SR09148SNG | Ninigi | Switch: rotary; Pos: 4; 0.5A/24VDC; Poles number: 1; 45°; brass; PBT |
| 306 | ||
| 29148098 | Lapp Group | Connector: fiber optic; plug; HFBR-4533,simplex; crimped |
| 92 | ||
| 8-1609148-2 | TE Connectivity | Filter: anti-interference; 222mA; screw RoHS : Compliant |
| 29 | ||
| 79148 | Goobay | Hub USB; USB 2.0,USB 3.2; microSD,SD; silver; Number of ports: 8 |
| 4 | ||
| W-99148 | KEL (Extension Cord Reels) | Extension lead; H05RR-F; 3G2.5mm2; 10m; rubber; black; 16A |
| 1 | ||
| 1291488 | Phoenix Contact | Splice terminal: rail; PTV; 24A; 800V; push-in; PA; L: 35.3mm; ways: 1 RoHS : Compliant |
| 0 | ||
| 21349091487005 | HARTING Technology Group | Cable: for sensors; M12; PIN: 4; shielded,angled; plug; Cores: 2 RoHS : Compliant |
| 0 | ||
| 21349091487050 | HARTING Technology Group | Cable: for sensors; M12; PIN: 4; shielded,angled; plug; Cores: 2 |
| 0 | ||
| 3-1676914-8 | TE Connectivity | Resistor: metal film; 487Ω; 250mW; ±0.1%; Ø2.3x6.3mm; -65÷155°C RoHS : Compliant |
| 0 | ||
| 09148812805 | HARTING Technology Group | Contact; female; nickel plated; crimped; 500mA; 32V; -40÷85°C RoHS : Compliant |
| 0 | ||
| 1.691.4800.01 | HUMMEL AG | Cable gland; with earthing; PG48; IP68; brass; HSK-M-EMC |
| 0 | ||
| 9148732002 | TE Connectivity | Heat shrink sleeve; flexible; 3: 1; 18mm; L: 1220mm; white RoHS : Compliant |
| 0 | ||
| 1676914-8 | TE Connectivity | Resistor: metal film; 37.4kΩ; 250mW; ±0.1%; Ø2.3x6.3mm; -65÷155°C RoHS : Compliant |
| 0 | ||
| 09148811405 | HARTING Technology Group | Contact; male; nickel plated; crimped; 4A; 32V; -40÷85°C RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | ICS9148BF15 | ics | Electronic Component RoHS : Not Compliant | 201 | ||
| ICS9148BF36LF | ics | FREQUENCY GENERATOR & INTEGRATED BUFFER FOR PENTIUM/PRO Processor Specific Clock Generator, 83.3MHz, CMOS, PDSO48 RoHS : Compliant | 150 | |||
![]() Interstate Connecting Components | CC9148-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTMS-90-SCE-3/16-6 | 0 | ||
| 11191489-00 | TE Connectivity | AST4600AG0200P3T1000:CTO-13000 | 0 | |||
| 9-1481301-0 | TE Connectivity | CLAMP PLATE | 0 | |||
| 9-1481301-2 | TE Connectivity | CLAMPING | 0 | |||
| 2204914-8 | TE Connectivity | CLAMSHELL BOT STL PLUG 10ACP,H | 0 | |||
| 750-191-48BT | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| M85049/148-10 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/148-10 | Amphenol PCD | M85049148-10 | 0 | |||
| 10219148-00 | TE Connectivity | EPRB-1-SU33-20B-/Z35/ATR/SC2M | 0 | |||
| 3-1676914-8 | TE Connectivity | YR1 0.1% 487R RoHS : Compliant |
| 0 | ||
| 447HS408M1914-8 | Glenair Inc | 0 | ||||
| 1676914-8 | TE Connectivity | YR1 0.1% 37K4 RoHS : Compliant |
| 0 | ||
| 91487-241LF | Amphenol FCi | L-N-L KIT, 2X6, W/O PV'S-91487 RoHS : Compliant |
| 0 | ||
| M85049/148-7 | Amphenol PCD | M85049148-7 | 0 | |||
| M85049/148-7 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
![]() PEI Genesis | M85049/148-10 | Amphenol PCD |
| 0 | ||
| M85049/148-7 | Amphenol PCD |
| 0 | |||
| M85049/148-2 | Amphenol PCD |
| 0 | |||
| M85049/148-5 | Amphenol PCD |
| 0 | |||
| 10-565991-48N | Amphenol Corporation |
| 0 | |||
| M85049/148-6 | Amphenol PCD |
| 0 | |||
| 27914-8T9 | ITT Interconnect Solutions |
| 0 | |||
| M85049/148-9 | Amphenol PCD |
| 0 | |||
| M85049/148-4 | Amphenol PCD |
| 0 | |||
| M85049/148-3 | Amphenol PCD |
| 0 | |||
| M85049/148-8 | Amphenol PCD |
| 0 | |||
| M85049/148-11 | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | 91488-571LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 356 | |
| 91486-122LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 53 | ||
| EK9148-000 | TE Connectivity | connector accessories RoHS : Compliant |
| 32 | ||
| 8-1609148-3 | TE Connectivity | Filters RoHS : Compliant |
| 30 | ||
| M85049/148-10 | Glenair Inc | ACCESSORIES - TAG RING ADAPTERS |
| 20 | ||
| M85049/148-2 | Glenair Inc | ACCESSORIES - TAG RING ADAPTERS |
| 20 | ||
| M85049/148-9 | Glenair Inc | ACCESSORIES - TAG RING ADAPTERS |
| 20 | ||
| 8-1609148-2 | TE Connectivity | Filters RoHS : Compliant |
| 19 | ||
| M85049/148-7 | Glenair Inc | ACCESSORIES - TAG RING ADAPTERS |
| 18 | ||
| M85049/148-6 | Glenair Inc | ACCESSORIES - TAG RING ADAPTERS |
| 14 | ||
| 91-482146-35S | Amphenol Corporation | RECEPT |
| 11 | ||
| 8-1609148-8 | TE Connectivity | Filters RoHS : Compliant |
| 2 | ||
| 269.1480.017 | Altech Corporation | TURNBUCKLE M6X60 E * B |
| 1 | ||
| 269.1480.016 | Altech Corporation | TURNBUCKLE M5X50 E B |
| 1 | ||
| 9-1481641-5 | TE Connectivity | Tools |
| 1 | ||
![]() PUI | 12.89148 | 27,038 | ||||
![]() Richardson RFPD | AD9148-M5375-EBZ | Analog Devices Inc | AD9148 DAC Evaluation Board 1GSPS RoHS : Compliant |
| 0 | |
| 9148-9513-000 | Radiall | Conn SMA 0Hz to 26GHz 50Ohm ST Flange Mount F Gold RoHS : Not Compliant |
| 0 | ||
| AD9148-M5372-EBZ | Analog Devices Inc | AD9148 DAC Evaluation Board 1GSPS RoHS : Compliant | 0 | |||
AD9148BBCZ![]() | Analog Devices Inc | DAC 4-CH Interpolation Filter 16-bit 196-Pin CSP-B RoHS : Compliant |
| 0 | ||
AD9148BBCZRL![]() | Analog Devices Inc | DAC 4-CH Interpolation Filter 16-bit 196-Pin CSP-B RoHS : Compliant |
| 0 | ||
| MSS39-148-B10B | MACOM | P-Type Silicon Schottky Diodes RoHS : Compliant | 0 | |||
AD9148BBPZ![]() | Analog Devices Inc | DAC 4-CH Interpolation Filter 16-bit 196-Pin TEBGA RoHS : Compliant |
| 0 | ||
| SI5340D-D09148-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 44-P RoHS : Compliant | 0 | |||
| CVCSO-914-800.000 | Crystek Corporation | Oscillator VCSO 800MHz ±200ppm (Stability) Sinewav RoHS : Compliant | 0 | |||
| AD9148-EBZ | Analog Devices Inc | AD9148 DAC Evaluation Board 1GSPS RoHS : Compliant |
| 0 | ||
AD9148BBPZRL![]() | Analog Devices Inc | DAC 4-CH Interpolation Filter 16-bit 196-Pin TEBGA RoHS : Compliant |
| 0 | ||
| SI5340D-D09148-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 44-P RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 12.89148 | Geyer Electronic E K | INSTOCK | 21,038 | ||
| P9148NRGI8 | Renesas Electronics Corporation | INSTOCK | 19,466 | |||
| 1SNB049148R1735 | TE Connectivity | INSTOCK | 4,095 | |||
| 10164939-1481022LF | Amphenol Corporation | INSTOCK | 1,664 | |||
| 0NT191480 | WAGO Innovative Connections | INSTOCK | 349 | |||
| 57G91488.488MHZ | VTI Technologies | INSTOCK | 100 | |||
![]() Avnet Abacus | 1914836 | Phoenix Contact | MSTBT 25 3ST BK MSTBT253STBK (Alt: 1914836) RoHS : Compliant | 0 | ||
| 1629148 | Phoenix Contact | M231RS1N8A80DUS M231RS1N8A80DUS (Alt: 1629148) RoHS : Compliant | 0 | |||
| 15339148 | Aptiv PLC | (Alt: 15339148) RoHS : Compliant | 0 | |||
| 1914810000 | Weidmüller Interface GmbH & Co. KG | WDM1914810000 (Alt: 1914810000) RoHS : Compliant | 0 | |||
| 9148732002 | TE Connectivity | Cable Accessories Heat Shrinkable Tubing CrossLinked Polyolefin White Stick (Alt: 9148732002) RoHS : Compliant | 0 | |||
| 1914820000 | Weidmüller Interface GmbH & Co. KG | WDM1914820000 (Alt: 1914820000) RoHS : Compliant | 0 | |||
| 1914840000 | Weidmüller Interface GmbH & Co. KG | WDM1914840000 (Alt: 1914840000) RoHS : Compliant | 0 | |||
| 1914880000 | Weidmüller Interface GmbH & Co. KG | WDM1914880000 (Alt: 1914880000) RoHS : Compliant | 0 | |||
| 1914800000 | Weidmüller Interface GmbH & Co. KG | WDM1914800000 (Alt: 1914800000) RoHS : Compliant | 0 | |||
| 1914890000 | Weidmüller Interface GmbH & Co. KG | WDM1914890000 (Alt: 1914890000) RoHS : Compliant | 0 | |||
| 1791480000 | Weidmüller Interface GmbH & Co. KG | WDM1791480000 (Alt: 1791480000) RoHS : Compliant | 0 | |||
| 91487-241LF | Amphenol Corporation | (Alt: 91487-241LF) RoHS : Compliant | 0 | |||
| 4-1419148-9 | TE Connectivity | T9AV1D2222RELAYPCVENTEDPC (Alt: 4-1419148-9) RoHS : Compliant | 0 | |||
| 9-1481221-2 | TE Connectivity | AMP914812212 (Alt: 9-1481221-2) RoHS : Not Compliant | 0 | |||
| 5-1419148-2 | TE Connectivity | (Alt: 5-1419148-2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2204914-8 | TE Connectivity | (Alt: 2204914-8) RoHS : Compliant | 0 | ||
| ASQM19148-A | Panasonic Electronic Components | (Alt: ASQM19148-A) RoHS : Compliant | 0 | |||
| 0039289148 | Molex | Pin Header, 14 Contacts, 2 Rows, 4.2mm, Gold, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0039289148) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MP9148GJ-Z | Monolithic Power Systems | (Alt: MP9148GJ-Z) RoHS : Compliant | 0 | ||
| MP9148GJ-P | Monolithic Power Systems | (Alt: MP9148GJ-P) RoHS : Compliant | 0 | |||
| XC9148A50CER-G | Torex Semiconductor LTD | (Alt: XC9148A50CER-G) RoHS : Compliant | 0 | |||
| XC9148C36CER-G | Torex Semiconductor LTD | (Alt: XC9148C36CER-G) RoHS : Compliant | 0 | |||
| XC9148B39CER-G | Torex Semiconductor LTD | (Alt: XC9148B39CER-G) RoHS : Compliant | 0 | |||
| XC9148A30DER-G | Torex Semiconductor LTD | (Alt: XC9148A30DER-G) RoHS : Compliant | 0 | |||
| XC9148F36CER-G | Torex Semiconductor LTD | (Alt: XC9148F36CER-G) RoHS : Compliant | 0 | |||
| XC9148G50DER-G | Torex Semiconductor LTD | DCDCStepUp (Alt: XC9148G50DER-G) RoHS : Compliant | 0 | |||
| XC9148J30CPR-G | Torex Semiconductor LTD | (Alt: XC9148J30CPR-G) RoHS : Compliant | 0 | |||
| XC9148B33CER-G | Torex Semiconductor LTD | (Alt: XC9148B33CER-G) RoHS : Compliant | 0 | |||
| XC9148A50DER-G | Torex Semiconductor LTD | (Alt: XC9148A50DER-G) RoHS : Compliant | 0 | |||
| XC9148J33CPR-G | Torex Semiconductor LTD | (Alt: XC9148J33CPR-G) RoHS : Compliant | 0 | |||
| XC9148A53CER-G | Torex Semiconductor LTD | (Alt: XC9148A53CER-G) RoHS : Compliant | 0 | |||
| XC9148C39CER-G | Torex Semiconductor LTD | (Alt: XC9148C39CER-G) RoHS : Compliant | 0 | |||
| XC9148C33CER-G | Torex Semiconductor LTD | (Alt: XC9148C33CER-G) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 1N9148F | IN STOCK SHIP TODAY |
| 77 | ||
| ICS9148AF-58 | ICS | IN STOCK SHIP TODAY | 30 | |||
| SK9148 | RCA | IN STOCK SHIP TODAY | 12 | |||
| 191485H-01 | NI | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 9148 | Heyco | HF3C 3/4 BLACKW/8465 NUT | 0 | ||
| R4-EM-99-148 | Southco | 0 | ||||
| FL5-HS-09148 | SHEREX FASTENING SO | 0 | ||||
| M9148 | Heyco | NLN M50 BLACK | 0 | |||
| 20591489 | Essentra Components | 1 BSPGAS THREAD KNURLED CAPLDP | 0 | |||
| M1-25-91-48 | Southco | 0 | ||||
![]() EBV Elektronik | MCH3914-8-TL-H | onsemi | NChannel JFET 15V 16 to 50mA 29mS MCPH3 ONSSPCTRNSTSK7C1K (Alt: MCH3914-8-TL-H) RoHS : Compliant | 0 | ||
| CP19148_AMY-50-ZOOM-C2-WHT | LEDIL | (Alt: CP19148_AMY-50-ZOOM-C2-WHT) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M22759/11-26-9148 | Whitmore/Wirenetics | Hook-Up Wire | 268,117 | ||
| M22759/11-24-9148 | Whitmore/Wirenetics | Hook-Up Wire | 31 | |||
| M85049/148-10 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/148-10 | Glenair Inc | Connector | 0 | |||
| M85049/148-7 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/148-7 | Glenair Inc | Connector | 0 | |||
| M85049/148-2 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/148-2 | Glenair Inc | Connector | 0 | |||
| M85049/148-5 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/148-5 | Glenair Inc | Connector | 0 | |||
| M85049/148-6 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/148-6 | Glenair Inc | Connector Acc | 0 | |||
| M85049/148-9 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/148-9 | Glenair Inc | Connector | 0 | |||
| M85049/148-4 | Amphenol PCD | Backshells & Ac | 0 | |||
![]() Master Electronics | CA1-B9-14-810-A21-MJ | Carling Technologies | CA1B914810A21MJ RoHS : Compliant |
| 0 | |
| FW-02-03-F-D-199-148 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CC9148-000 | TE Connectivity | TMS-90-SCE-3/16-6 MOQ Reduction RoHS : Compliant |
| 0 | ||
| CA2-B9-14-810-3B1-MG | Carling Technologies | CA2B9148103B1MG RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-219-148 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1291488 | Phoenix Contact | PTV 2 5 OG RoHS : Compliant |
| 0 | ||
| 11191489-00 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1914836 | Phoenix Contact | Conn Terminal Block F 3 POS 5mm Screw RA Cable Mount 12A RoHS : Compliant |
| 0 | ||
| Z99148 | ITT Interconnect Solutions | FRCIR06F-18-1P-F80-T108 RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-199-148 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-159-148 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-249-148 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-109-148 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 9-1481643-3 | TE Connectivity | SLIDER BLADE TRIM RoHS : Compliant |
| 0 | ||
| CS1-B9-14-810-A11-R | Carling Technologies | CS1B914810A11R RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 09148812405 | HARTING Technology Group | Heavy Duty Power Connectors Han-Mod M12 D-code female RoHS : Compliant |
| 50 | |
| 09148811806 | HARTING Technology Group | Circular Metric Connectors HAN M12 08P MA CRIMP RoHS : Compliant |
| 50 | ||
| 09148811805 | HARTING Technology Group | Heavy Duty Power Connectors Han-Mod M12 X-code male RoHS : Compliant |
| 50 | ||
| 09148812805 | HARTING Technology Group | Heavy Duty Power Connectors Han-Mod M12 X-code female RoHS : Compliant |
| 40 | ||
| 09148811405 | HARTING Technology Group | Heavy Duty Power Connectors Han-Mod M12 D-code male RoHS : Compliant |
| 27 | ||
| 5309 148 | Altech Corporation | Cable Gland Polyamide (PA6), Nylon 6 PG48 Light Gray |
| 10 | ||
| 09148211805 | HARTING Technology Group | Circular Metric Connectors Han-Mod M12 A-code 8 pin Male RoHS : Compliant |
| 1 | ||
| 09148212805 | HARTING Technology Group | Circular Metric Connectors Han-Mod M12 A-code 8 pin Female RoHS : Compliant |
| 1 | ||
| 09148812405, 09 14 881 2405 | HARTING Technology Group | M12 Modular Insert, Female, Liquid Crystal Polymer, D Coded, 4 Contacts, Crimp |
| 0 | ||
| 09148812406 | HARTING Technology Group | Circular Metric Connectors HAN M12 04P FE CRIMP RoHS : Compliant |
| 0 | ||
| 3049148 | Phoenix Contact | Feed-thru term block w/bolt conn, 1row 1pos 2conn, AWG:14-2, W 20.3mm, blue, RT 8 BU RoHS : Compliant |
| 0 | ||
| 0914882 | Phoenix Contact | Circuit Breakers CIR BRKR 10A 250VAC 65VDC RoHS : Compliant |
| 0 | ||
| 2914819 | Phoenix Contact | Enclosures for Industrial Automation ME 35 UT TBUS KMGY RoHS : Compliant |
| 0 | ||
2914822![]() | Phoenix Contact | Enclosures, Boxes, & Cases ME 35 UTG TBUS KMGY RoHS : Compliant |
| 0 | ||
| 2891482 | Phoenix Contact | Ethernet Cables / Networking Cables FL CAT6 PATCH 1.5 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3CA1091-48 | Pasternack Enterprises |
| 586 | ||
| PE39148 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50. SMA Male to SMA Female Cable Using PE-C400 Coax. PE39148 is a SMA male to SMA female cable using PE-C400 coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39148 SMA male to SMA female cable assembly is constructed with PE-C400 coax. | 400 | |||
| PE3C8491-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 48 inches. Fire Rated N Male to N Female Low PIM Cable 48 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to N female low PIM cable 48 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to N female low PIM cable 48 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8491-48, can also be known as a low PIM N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C8491-48 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8491-48 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N female low PIM cable 48 inch length using SPF-250 coax using Times Microwave parts. |
| 84 | ||
| PE39148-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Cable 12 Inch Length Using PE-C400 Coax., Radio frequency assembly SMA male to SMA female cable 12 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female cable 12 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39148-12, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39148-12 is built with PE-C400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39148-12 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 12 inch length using PE-C400 coax. |
| 80 | ||
| PE3W03391-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 48 inches. HN Male to 7/16 DIN Male Right Angle Cable 48 Inch Length Using RG217 Coax., Radio frequency assembly HN male to 7/16 DIN male right angle cable 48 inch length using RG217 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. HN male to 7/16 DIN male right angle cable 48 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our HN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This HN to 7/16 DIN cable is a male to male coax assembly, PE3W03391-48, can also be known as a HN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. HN plug to 7/16 DIN plug cable assembly PE3W03391-48 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this HN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03391-48 can also be used in the other direction and will be right angle 7/16 DIN male to HN male cable assembly if the opposite connectivity is required. HN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to 7/16 DIN male right angle cable 48 inch length using RG217 coax. |
| 61 | ||
| PE3C6191-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum 7/16 DIN Male to N Female Bulkhead Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N female bulkhead low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N female bulkhead low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-NF-BH-LP N type bulkhead cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable is a male to female coax assembly, PE3C6191-48, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack cable assembly PE3C6191-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6191-48 can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N female bulkhead low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE91482 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Tri-Metal, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Tri-Metal. Low PIM QD 4.3-10 Female to N Female Adapter. 4.3-10 adapter PE91482 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 4.3-10 to type N adapter is a between series coaxial adapter design. This 50 Ohm 4.3-10 adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz. 4.3-10 female to type N female adapter is one of the many RF components that ship same day as they are ordered. PE91482 female 4.3-10 to female type N adapter has a straight body. This Pasternack straight 4.3-10 coax adapter is a in-line RF adapter. Our female 4.3-10 to female N type adapter PE91482 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 4.3-10 to type N radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 12 | ||
| PE91481 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Tri-Metal, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Tri-Metal. Low PIM QD 4.3-10 Female to N Male Adapter. 4.3-10 adapter PE91481 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 4.3-10 to type N adapter is a between series coaxial adapter design. This 50 Ohm 4.3-10 adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz. 4.3-10 female to type N male adapter is one of the many RF components that ship same day as they are ordered. PE91481 female 4.3-10 to male N type adapter has a straight body. This Pasternack straight 4.3-10 coax adapter is a in-line RF adapter. Our female 4.3-10 to male type N adapter PE91481 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 4.3-10 to N type radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 6 | ||
| PE34191-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-020SR Coax., Radio frequency assembly SMA male to SMA male cable 48 inch length using PE-020SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 48 inch length using PE-020SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34191-48, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34191-48 is built with PE-020SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using PE-020SR coax. |
| 1 | ||
| PE3C8291-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.1/9.5 Mini DIN Male to N Female Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to N type cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to type N cable is a male to female coax assembly, PE3C8291-48, can also be known as a low PIM 4.1/9.5 mini DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to N type jack cable assembly PE3C8291-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8291-48 can also be used in the other direction and will be type N female to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3W05291-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-200 Coax., Radio frequency assembly BNC male to SMA male low loss cable 48 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 48 inch length using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W05291-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05291-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. BNC plug to SMA plug cable assembly PE3W05291-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05291-48 can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3291-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to N Male Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly SMA male to N male cable 48 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3291-48, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3291-48 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3291-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 48 inch length using RG174 coax. |
| 0 | ||
| PE3C6491-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX004, RF Cable Type: PE-SR070TNLL, RF Cable Impedance: 50 Ohm, Length: 48 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 48 Inch Length Using 070 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 48 inch length using 070 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 48 inch length using 070 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6491-48, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6491-48 is built with PE-SR070TNLL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 48 inch length using 070 coax. |
| 0 | ||
| PE3C5091-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Snap-On MMBX Plug to SMA Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly snap-on MMBX plug to SMA male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Snap-on MMBX plug to SMA male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA cable connection on the other. Our MMBX to SMA cable assembly has plug gender on end 1 and male on end 2. PE3C5091-48 can also be known as a MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MMBX male to SMA plug cable assembly PE3C5091-48 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C5091-48 RF cable are available on our downloadable PDF datasheet.PE3C5091-48 can also be used in the other direction and will be SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8391-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Male to N Female Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8391-48 can also be known as a low PIM 2.2-5 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.65-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 2.2-5 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8391-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 male to type N female cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N jack cable assembly PE3C8391-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8391-48 can also be used in the other direction and will be a type N female to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | 7914830000 | Weidmueller & Kg | Modular Terminal Block, 20A | 18,329 | ||
| 91483-041 | Amphenol FCi | Telecom and Datacom Connector, 8 Contact(s), Female, Crimp Terminal, Locking, Plug RoHS : Not Compliant | 12,737 | |||
| 5962-01-414-9148 | Analog Devices Inc | 11,909 | ||||
AD9148BBCZRL![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.02us Settling Time, PBGA196 RoHS : Compliant | 11,763 | |||
| 1914836 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,423 | |||
AD9148BPCZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.02us Settling Time, PBGA196 | 9,460 | |||
AD9148BPCZRL![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.02us Settling Time, PBGA196 | 9,152 | |||
| 91487-191 | Amphenol FCi | Telecom and Datacom Connector, 12 Contact(s), Female, Crimp Terminal, Plug RoHS : Not Compliant | 9,007 | |||
AD9148BBCZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.02us Settling Time, PBGA196 RoHS : Compliant | 8,467 | |||
| AD9148-M5375-EBZ | Analog Devices Inc | RoHS : Compliant | 8,150 | |||
| AD9148-M5372-EBZ | Analog Devices Inc | 7,799 | ||||
| 12191487 | Aptiv PLC | Combination Line Connector, 38 Contact(s), Female, Crimp Terminal RoHS : Compliant | 6,177 | |||
| 1914881 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,243 | |||
| ICS9148F-25 | Integrated Circuit Systems Inc | Processor Specific Clock Generator, 83.3MHz, CMOS, PDSO48 RoHS : Not Compliant | 864 | |||
| 914840 | Phoenix Contact | 729 | ||||
![]() Win Source Electronics | P9148NRGI8 | Renesas Electronics Corporation | DFN 4.00X3.00X0.90 MM, 0.50MM PI |
| 60,484 | |
| P9148ANRGI8 | Renesas Electronics Corporation | IC PMIC PWR MODULE 12DFN / General Purpose PMIC 12-DFN (4x3) RoHS : Compliant |
| 8,097 | ||
AD9148BBPZ![]() | Analog Devices Inc | IC DAC 16BIT SPI/SRL 196BGA RoHS : Compliant |
| 1,080 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |