| Electronic Components Datasheet Search |
|
9061 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 7-1879061-4 | TE Connectivity | Resistor: thin film; 10kΩ; SMD; 0402; 62.5mW; ±0.1%; -55÷155°C RoHS : Compliant |
| 2,279 | |
| S906-10135-1504 | TT Electronics plc | Resistor: thin film |
| 799 | ||
| 173109-0615 | Molex | Connector: D-Sub; data transfer |
| 50 | ||
| MN-79-061 | MODECO EXPERT | Mixer; 80mm; hexagonal |
| 4 | ||
| DBAS 70-12-0 SN 090-6117 | TE Connectivity | Connector: circular; Automotive; straight |
| 3 | ||
| 9061 | Keystone Electronics Corp | PCB distance; polyamide; L: 6.35mm; Mount.plate thick: 1.5748mm RoHS : Compliant |
| 0 | ||
| 9061 | MBS AG | Transformer: current; ASK 31.5; I AC: 200A; 5VA; 75.5x61x68mm |
| 0 | ||
| MAT9061006 10M | igus Inc | Cable: servo drive; 10m; Standard: Siemens; chainflex; harnessed |
| 0 | ||
| MAT9061006 3M | igus Inc | Cable: servo drive; 3m; Standard: Siemens; chainflex; harnessed |
| 0 | ||
| MAT9061002 5M | igus Inc | Cable: servo drive; 5m; Standard: Siemens; chainflex; harnessed |
| 0 | ||
| GWD9061 | Gewiss SpA | Power breaker; Poles: 3; screw type; Inom: 25A; 525VAC; IP20; MCCB |
| 0 | ||
| 09061260 | GSR | Tap: metric; M14; right hand thread; 2; L: 110mm; 9mm; 6H; Silver |
| 0 | ||
| 1906129 | Phoenix Contact | Connector: PCB terminal block; power supply; 32A; 1kV; PIN: 4 RoHS : Compliant |
| 0 | ||
| 0039061 | Lapp Group | Wire; ÖLFLEX® CRANE; 7G1.5mm2; unshielded; 300V,500V; Cu; stranded RoHS : Compliant |
| 0 | ||
| 09061322921 | HARTING Technology Group | Contact; male; gold-plated; type F; THT; 6A; angled; UL94V-0 RoHS : Compliant |
| 0 | ||
![]() Verical | 90-617-6 | Calrad Electronics | 90-617-6 |
| 280 | |
| 906143-000 | TE Connectivity | Shrink Boot Adapters 180° 20 Shell Size Olive Drab Cadmium Over Electroless Nickel Aluminum Alloy RoHS : Not Compliant |
| 2 | ||
| 9061152991 | HARTING Technology Group | Conn DIN 41612 HDR 15 POS 5.08mm Solder RA Thru-Hole RoHS : Compliant |
| 1 | ||
![]() Avnet Americas | 5-965906-1 | TE Connectivity | Contact Socket Crimp Straight Cable Mount T/R - Tape and Reel (Alt: 5-965906-1) RoHS : Compliant |
| 36,000 | |
| MMBT3906-13-F | Diodes Incorporated | - Tape and Reel (Alt: MMBT3906-13-F) RoHS : Compliant |
| 30,000 | ||
| DB509061 | ITT Interconnect Solutions | - Bulk (Alt: DB509061) RoHS : Not Compliant |
| 500 | ||
| MCP19061T-E/RTB | Microchip Technology Inc | Programmable Mixed Signal Matrix, 4.5 V to 42 V, 32 Pins, VQFN-EP - Tape and Reel (Alt: MCP19061T-E/RTB) RoHS : Not Compliant |
| 25 | ||
| SDR0906-102KL | Bourns Inc | - Tape and Reel (Alt: SDR0906-102KL) RoHS : Compliant |
| 0 | ||
| SRR0906-122KL | Bourns Inc | - Tape and Reel (Alt: SRR0906-122KL) RoHS : Compliant |
| 0 | ||
| DBAS 76-61-949 SN 090-6117 | TE Connectivity | - Bag (Alt: ZPF000000000013343) RoHS : Not Compliant |
| 0 | ||
| 380MS137M0906-12 | Glenair Inc | - Bulk (Alt: 380MS137M0906-12) RoHS : Not Compliant | 0 | |||
| 390MS077M0906-12 | Glenair Inc | - Bulk (Alt: 390MS077M0906-12) RoHS : Not Compliant | 0 | |||
| DBAS 70-19-7 PN 090-6116 | TE Connectivity | - Bag (Alt: ZPF000000000107754) RoHS : Not Compliant |
| 0 | ||
| 230969-0611 | Molex | B32672L4474J289 - Bulk (Alt: 2309690611) RoHS : Compliant |
| 0 | ||
| 7906110000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 7906110000) RoHS : Compliant |
| 0 | ||
| 8-519061-4 | TE Connectivity | - Bulk (Alt: 8-519061-4) RoHS : Not Compliant |
| 0 | ||
| BWCT0016090618NJ00 | Pulse Electronics Corporation | - Tape and Reel (Alt: BWCT0016090618NJ00) RoHS : Compliant |
| 0 | ||
| DBAS 74-19-4 PY 090-6117 | TE Connectivity | - Bag (Alt: ZPF000000000203762) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | 9061 | Keystone Electronics Corp | Standoffs & Spacers SUPPORT RoHS : Compliant |
| 4,154 | |
| 100R5-203B | Johnson Electric / Parlex Corporation | Flat Cables 1.00mm-05-8-B ZIF 1.00mm Pitch Cable RoHS : Compliant |
| 901 | ||
| 195202-234 | Johnson Electric / Parlex Corporation | Solenoids & Actuators STA Tubular 1/2" x 1" Pull 60 w/o AR Flat RoHS : Compliant |
| 717 | ||
| 129415-028 | Johnson Electric / Parlex Corporation | Solenoids & Actuators Low Profile 5EC |
| 318 | ||
| 195940-024 | Johnson Electric / Parlex Corporation | Solenoids & Actuators BTA 6EVM Metric Counter-Clockwise |
| 59 | ||
| 09670029061 | HARTING Technology Group | D-Sub Tools & Hardware DSUB IP67 SHIELD CAP FEM 15P 4-40 UNC RoHS : Compliant |
| 34 | ||
| 1438-9SB0001 | Johnson Electric / Parlex Corporation | Circuit Board Hardware - PCB Solenoid Demo Board |
| 3 | ||
| 9061 | Heyco | Screws & Fasteners PR 161-138 WHITE Snap Rivets RoHS : Compliant |
| 0 | ||
| 09670099061 | HARTING Technology Group | D-Sub Standard Connectors |
| 0 | ||
| 09670159061 | HARTING Technology Group | D-Sub Tools & Hardware |
| 0 | ||
| 09692009061 | HARTING Technology Group | D-Sub Mixed Contact Connectors D SUB 3W3 FE STR UNLOAD ON A FLOAT RoHS : Compliant |
| 0 | ||
| 09670259061 | HARTING Technology Group | D-Sub Standard Connectors |
| 0 | ||
| 09670379061 | HARTING Technology Group | D-Sub Backshells |
| 0 | ||
| 09694009061 | HARTING Technology Group | D-Sub Mixed Contact Connectors D SUB FE 8W8 STRAIGHT 20 AMP RoHS : Compliant |
| 0 | ||
| VS425-40UL 110V AC | ELKO EP HOLDING SE | Contactors - Electromechanical Installation contactor 4x25 A, 4 x NO RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 9061152991 | HARTING Technology Group | Conn DIN 41612 HDR 15 POS 5.08mm Solder RA Thru-Hole RoHS : Compliant |
| 1 | |
![]() Newark | 2329906-1 | TE Connectivity | Contact, Tab, 18-20Awg, Crimp; |Te Connectivity 2329906-1 RoHS : Compliant |
| 15,000 | |
| 2329906-1 | TE Connectivity | Contact, Tab, 18-20Awg, Crimp; |Te Connectivity 2329906-1 RoHS : Compliant |
| 15,000 | ||
| 2329906-1 | TE Connectivity | Contact, Tab, 18-20Awg, Crimp; |Te Connectivity 2329906-1 RoHS : Compliant |
| 4,287 | ||
PMST3906,115![]() | Nexperia | Trans, Bjt, Single, Switching, Pnp, -40V; |Nexperia PMST3906,115 RoHS : Compliant |
| 2,948 | ||
| 49061 | Brady Worldwide Inc | B808,17 Dia Red/Glow, Exit Floor Sign/ S; |Brady 49061 RoHS : Not Compliant |
| 320 | ||
| 09149061101 | HARTING Technology Group | Heavy Duty Module, Socket, 6Pos, 10A; |Harting 09149061101 RoHS : Compliant |
| 136 | ||
| FMCA2906-12 | Fairview Microwave Inc | Cbl Assy, Sma Plug-R/A Plug, 50 Ohm, 12"; |Fairview Microwave FMCA2906-12 RoHS : Not Compliant |
| 86 | ||
| 87759-0614 | Molex | Connector, Header, 6Pos, 2Row, 2Mm; |Molex 87759-0614 RoHS : Compliant |
| 73 | ||
| 40906110092424 | Wurth Elektronik | Heat Sink, 15K/W, 24X24X9Mm, Alum; |Würth Elektronik 40906110092424 RoHS : Compliant |
| 29 | ||
| MCP19061T-E/RTB | Microchip Technology Inc | Dc/Dc Controller, Synchronous Buck-Boost; |Microchip Technology MCP19061T-E/RTB RoHS : Compliant |
| 25 | ||
| MCP19061T-E/RTB | Microchip Technology Inc | Dc/Dc Controller, Synchronous Buck-Boost; |Microchip Technology MCP19061T-E/RTB RoHS : Compliant |
| 25 | ||
| FMCA2906-100CM | Fairview Microwave Inc | Sma Male-Ra Sma Male Cbl Tinned Copper; |Fairview Microwave FMCA2906-100CM RoHS : Not Compliant |
| 10 | ||
| 2352906-1 | TE Connectivity | Ethernet Module, M12 X-Code X 12, Rack; Available Until Stocks Are Exhausted Alternative Available |Te Connectivity 2352906-1 RoHS : Compliant |
| 3 | ||
| 89061554SP | nVent Hoffman | Swt Lmt P100Ac1C 5 20 Psi; |Nvent Hoffman 89061554SP RoHS : Compliant |
| 1 | ||
| 9061 | Keystone Electronics Corp | Nylon Pcb Support; |Keystone 9061 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX9061EBS+TG45 | Analog Devices Inc | Ultra-Small, Low-Power Single RoHS : Compliant |
| 67,500 | |
| MAX9061EUK+T | Analog Devices Inc | Ultra-Small, Low-Power Single RoHS : Compliant |
| 35,555 | ||
| MAX9061EVKIT+ | Analog Devices Inc | Eval Kit MAX9060 - MAX9065 (Ul RoHS : Compliant |
| 10 | ||
| MAX9061EBS+G45 | Analog Devices Inc | Ultra-Small, Low-Power Single RoHS : Compliant | 0 | |||
| MAX9061EUK+ | Analog Devices Inc | Ultra-Small, Low-Power Single RoHS : Compliant | 0 | |||
![]() RS | 2329906-1 | TE Connectivity | POWER VERSA-LOCK 5.0, GANG WIRE SEAL, WIRE-TO-WIRE, REAR SEAL, 1X3 RoHS : Compliant |
| 10,000 | |
| 9061 | Keystone Electronics Corp | PCB SUPPORT, REVERSE CHASSIS MOUNT, LENGTH .250, NYLON 6/6, UL94V-0 RoHS : Compliant |
| 2,045 | ||
| 213906-1 | TE Connectivity | CONNECTOR HOUSING CPC PLUG ASSY 10 POS. SZ. 17 SERIES 6 FREE HANG REV SEX RoHS : Compliant |
| 33 | ||
| 1090619 | Phoenix Contact | PT 10-HESILED 250 (6 3X32) RoHS : Compliant |
| 16 | ||
| 09061486951 | HARTING Technology Group | CONNECTORS, DIN 41612, DIN-POWER F048MR-3,0C1-2 RoHS : Compliant |
| 10 | ||
| 09061486901222 | HARTING Technology Group | CONNECTOR PLUG, WT 26.92 G, 48 CONTACTS, DIN 41612 SERIES RoHS : Compliant |
| 10 | ||
| 2369061 | RS Pro | STRAIGHT MALE TO FEMALE 9.5MM COAX TV CABLE WITH COUPLER, WHITE, 32FT (10M) |
| 9 | ||
| 190614 | RS Pro | PLAIN STAINLESS STEEL PAN HEAD MACHINE SCREWS M6X20MM |
| 5 | ||
| 2629061 | RS Pro | PLASTIC SQUARE SHAPE PHOTOELECTRIC SENSO |
| 3 | ||
| 1749061 | RS Pro | M42 COBALT HOLE SAW 114MM |
| 2 | ||
| 7000-19061-7051000 | Murrelektronik GmbH | CABLE ASSEMBLY, RIGHT ANGLE M12 FEMALE TO PIGTAIL, BLACK, PUR, 12 POLE RoHS : Compliant |
| 2 | ||
| R159061200 | Bosch Rexroth | DEEP-GROOVE BALL BEARING W/ RETAINING RING 6201.2RS FOR BALL SCREW SHAFT 20MM |
| 1 | ||
| R159061700 | Bosch Rexroth | DEEP-GROOVE BALL BEARING W/ RETAINING RING 6203.2RS FOR BALL SCREW SHAFT 25MM |
| 1 | ||
| 09149061101 | HARTING Technology Group | HAN DOMINO 6PIN DD CUBE FEMALE CRIMP -POS. 1 RoHS : Compliant |
| 1 | ||
| SBLVAG1 (19061) | Banner Engineering Corp | RETROREFLECTIVE 3/4 WIRE SCANNER BLOCK, ANTI-GLARE, 0.3-4.5 M, MULTI-BEAM SERIES |
| 1 | ||
![]() Microchip Technology Inc | MCP19061T-E/RTB | Microchip Technology Inc | 12V power rail automotive 4 switch buck-boost controller, VQFN, Projected EOL: 2051-10-18 RoHS : Compliant |
| 3,300 | |
| MCP19061-E/RTB | Microchip Technology Inc | 12V power rail automotive 4 switch buck-boost controller, VQFN, Projected EOL: 2051-10-18 RoHS : Compliant |
| 1,048 | ||
| M906111CI1B-050.0000 | Microchip Technology Inc | Defense Apps MEMS OSC, 50MHz, LVCMOS, -40-85C, 50ppm, 3.2x2.5, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 85 | ||
| MO9061-15 | Microchip Technology Inc | K-Band Detector, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| MO9061-02 | Microchip Technology Inc | K-BAND TRANSCEIVER, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| MO9061-10 | Microchip Technology Inc | K-Band Detector, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| M906101AI1B-100.0000 | Microchip Technology Inc | Defense Apps MEMS OSC, 100MHz, LVCMOS, -40-85C, 50ppm, 7.0x5.0, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101AI2B-033.3333 | Microchip Technology Inc | Defense Apps MEMS OSC, 33.3333MHz, LVCMOS, -40-85C, 25ppm, 7.0x5.0, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101BI1B-040.0000 | Microchip Technology Inc | Defense Apps MEMS OSC, 40MHz, LVCMOS, -40-85C, 50ppm, 5.0x3.2, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101BI2B-002.0480 | Microchip Technology Inc | Defense Apps MEMS OSC, 2.048MHz, LVCMOS, -40-85C, 25ppm, 5.0x3.2, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101BI2B-020.0000 | Microchip Technology Inc | Defense Apps MEMS OSC, 20MHz, LVCMOS, -40-85C, 25ppm, 5.0x3.2, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101AI1B-100.0000T | Microchip Technology Inc | Defense Apps MEMS OSC, 100MHz, LVCMOS, -40-85C, 50ppm, 7.0x5.0, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101AI2B-033.3333T | Microchip Technology Inc | Defense Apps MEMS OSC, 33.3333MHz, LVCMOS, -40-85C, 25ppm, 7.0x5.0, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101BI1B-040.0000T | Microchip Technology Inc | Defense Apps MEMS OSC, 40MHz, LVCMOS, -40-85C, 50ppm, 5.0x3.2, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
| M906101BI2B-002.0480T | Microchip Technology Inc | Defense Apps MEMS OSC, 2.048MHz, LVCMOS, -40-85C, 25ppm, 5.0x3.2, VDFN, Projected EOL: 2051-05-14 RoHS : Compliant |
| 0 | ||
![]() Future Electronics | 9061 | Keystone Electronics Corp | BOARD SUPRT SNAP LOCK NYLON 1/4 RoHS : Compliant |
| 0 | |
| 9061 | Heyco | PR Series White Color Nylon Material Snap Rivet RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 15-97-9061 | Molex | Conn Housing F 6 POS 4.2mm Crimp ST Cable Mount Mini-Fit® TPA Bag RoHS : Compliant |
| 20,413 | |
| 9061 | Heyco | PR 161-138 WHITE RoHS : Compliant |
| 0 | ||
| 53426-9061 | Molex | Mini-Lock2.5 PlugHsgAssy RA 6Ckt BLK_GW RoHS : Compliant |
| 0 | ||
| 9061-P | Heyco | PR 161-138 WHITE 50PK RoHS : Compliant |
| 0 | ||
| 9061-0264 | Altech Corporation | ITBN-M8-S1.5-FL-1030VDC RoHS : Compliant |
| 0 | ||
| 22-28-9061 | Molex | 2.54mm Pitch KK® Header, Breakaway, Right Angle Surface Mount Compatible, 6 Circuits, Tin (Sn) Plating, Mating Pin Length 8.23mm, with Kinked PC Tails RoHS : Compliant |
| 0 | ||
| 22-26-9061 | Molex | 2.54mm KK® IDT Double Cantilever Contact, 6 Circuits, Tin (Sn), Feed-To, 26 Stranded or Solid, and 28 Solid, Stranded, or Fused, Brown ID Stripe RoHS : Compliant |
| 0 | ||
| 26-60-9061 | Molex | 156 KK HDR STR SQ PIN TIN 6CKT RoHS : Compliant |
| 0 | ||
| 26-61-9061 | Molex | 156 KK HDR STR SQ PIN W/SIP AU 6CKT RoHS : Compliant |
| 0 | ||
| 26-48-9061 | Molex | 3.96mm (.156") Pitch KK® Header, Breakaway, Vertical, 6 Circuits, Tin (Sn) Plating, Pin length 33.40mm (1.315") RoHS : Compliant |
| 0 | ||
| 80-6107-9061-2 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | PMST3906,115![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.2A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant |
| 79 | |
PMSS3906,115![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.1A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant |
| 387,500 | ||
PMST3906,135![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.2A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant |
| 14,774 | ||
PMSS3906,115![]() | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant |
| 624,000 | ||
| CG9061AM | Infineon Technologies AG | CG9061AM - NVSRAM | 2,156 | |||
| MAX9061EBS+G45 | Analog Devices Inc | Comparator General Purpose 1 CH Open Drain 4-BGA T/R RoHS : Compliant |
| 2,390 | ||
LM9061M![]() | Texas Instruments | Buffer/Inverter Based MOSFET Driver, BIMOS, PDSO8 RoHS : Not Compliant |
| 120 | ||
LM9061M/NOPB![]() | Texas Instruments | Buffer/Inverter Based MOSFET Driver, 0.01A, BIMOS, PDSO8 RoHS : Compliant |
| 104 | ||
| AVR-1Z090610SR10KT | Abracon Corporation | IND FIXED Molded Ferrite 100nH 84A 120u OHM (Max) ±10% RoHS : Compliant |
| 400 | ||
| AVR-1Z090610SR15KT | Abracon Corporation | IND FIXED Molded Ferrite 150nH 84A 120u OHM (Max) ±10% RoHS : Compliant |
| 400 | ||
| AVR-1Z090610SR18KT | Abracon Corporation | IND FIXED Molded Ferrite 180nH 84A 120u OHM (Max) ±10% RoHS : Compliant |
| 400 | ||
| AVR-1Z090610SR22KT | Abracon Corporation | IND FIXED Molded Ferrite 220nH 84A 120u OHM (Max) ±10% RoHS : Compliant |
| 400 | ||
| AVR-1Z090610SR28KT | Abracon Corporation | IND FIXED Molded Ferrite 280nH 84A 120u OHM (Max) ±10% RoHS : Compliant |
| 400 | ||
| LM9061M | National Semiconductor Corporation | Buffer/Inverter Based MOSFET Driver, BIMOS, PDSO8 RoHS : Not Compliant |
| 175 | ||
| LM9061M/NOPB | National Semiconductor Corporation | Buffer/Inverter Based MOSFET Driver, 0.01A, BIMOS, PDSO8 RoHS : Compliant |
| 408 | ||
![]() Sager | 9061 | Keystone Electronics Corp | Standoffs & Spacers SUPPORT RoHS : Compliant |
| 0 | |
| 7704906124 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707906129 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| BTF3-09-06-1-C-SB | TE Connectivity | Circular MIL Spec Backshells BTF3-09-06-1-C-SB RoHS : Compliant | 0 | |||
| BTH1-19-06-1-B-SB | TE Connectivity | Circular MIL Spec Backshells BTH1-19-06-1-B-SB RoHS : Not Compliant | 0 | |||
| BTH3-19-06-1-B-SB | TE Connectivity | TE Connectivity BTH3-19-06-1-B-SB RoHS : Not Compliant | 0 | |||
| BTSH1-09-06-1-B-SB | TE Connectivity | TE Connectivity | 0 | |||
| BTSH3-09-06-1-B-SB | TE Connectivity | TE Connectivity | 0 | |||
| 1-1589061-3 | TE Connectivity | Standard Circular Connector QCM019SC2DMC30P RoHS : Compliant |
| 0 | ||
| 1731090612 | Molex | D-Sub Standard Connectors RoHS : Compliant |
| 0 | ||
| 0539890615 | Molex | I/O Connectors 2.0 I/O MOLD COVER A | 0 | |||
| 0386906123 | Molex | Barrier Terminal Blocks SR BTS CS PC 23ASY | 0 | |||
| 2906180 | Phoenix Contact | Terminal Block Interface Modules UM-D37M/DS/FU/LED/ AID16/C3/R C RoHS : Compliant |
| 0 | ||
| 7704906119 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707906132 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Ameya Holding Limited | TLV9061SQDBVRQ1 | Texas Instruments | RoHS : Compliant | 60,000 | ||
| BD90610UEFJ-CE2 | ROHM Semiconductor | 输入电压3.5V ~ 36V 输出开关电流 1.25A 单通道降压开关稳压器 RoHS : Compliant |
| 5,250 | ||
| TLV9061SQDBRQ1 | Texas Instruments | 3,000 | ||||
TLV9061IDBVR![]() | Texas Instruments | RoHS : Compliant | 1,318 | |||
LM9061M/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,045 | |||
| BD90610EFJ-CE2 | ROHM Semiconductor | RoHS : Compliant |
| 10 | ||
![]() ComSIT USA | TLV9061IDBVR![]() | Texas Instruments | Operational Amplifier, 1 Func, 1500uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 2,035 | ||
| 9061486901 | HARTING Technology Group | MALE CONNECTOR WITH ANGLED SOLDER PIN Board Euro Connector, 48 Contact(s), 3 Row(s), Male, Right Angle, 0.2 inch Pitch, Solder Terminal RoHS : Compliant | 180 | |||
| MLX90614LSFDAA | Melexis Microelectronic Integrated Systems | Electronic Component RoHS : Not Compliant | 165 | |||
| LM9061M | National Semiconductor Corporation | Buffer/Inverter Based MOSFET Driver, BIMOS, PDSO8 RoHS : Not Compliant | 95 | |||
| 906132693103 | HARTING Technology Group | Electronic Component RoHS : Not Compliant | 40 | |||
| 9061152911 | HARTING Technology Group | Backplane Connectors Backplane Connectors - DIN 41612 Header, Male Blades RoHS : Compliant | 20 | |||
![]() Interstate Connecting Components | 1-1589061-3 | TE Connectivity | QCM019SC2DMC30P = CIRCULAR RoHS : Compliant |
| 0 | |
| DBAS 70-37-3 SN 090-61 | TE Connectivity | DBAS 70-37-3 SN 090-6116 | 0 | |||
| 380MS137M0906-12 | Glenair Inc | RoHS : Compliant | 0 | |||
| 390MS077M0906-12 | Glenair Inc | RoHS : Compliant | 0 | |||
| 6-1879061-2 | TE Connectivity | CPF 0402 3K3 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
| 796189-061 | TE Connectivity | EPKT-2043 | 0 | |||
| 8-519061-4 | TE Connectivity | A 6*6*30 DIN 6885 |
| 0 | ||
| 4-690618-4 | TE Connectivity | ANVIL, SPLICE TYPE |
| 0 | ||
| 1589061-8 | TE Connectivity | QCM019SC2DCC30P = CIRCULAR RoHS : Compliant |
| 0 | ||
| J599EIE9061A10 | SOURIAU-SUNBANK | J59603 | 0 | |||
| 10127819-0612GTLF | Amphenol FCi | 10127819-0612GTLF-MTK 4.2 06P | 0 | |||
| 10131319-06122GTLF | Amphenol FCi | 10131319-06122GTLF-MTK 4.2 06P | 0 | |||
| 5-177906-1 | TE Connectivity | POWER DBL LOCK CAP HSG P/M 2P( RoHS : Compliant |
| 0 | ||
| 5-2287906-1 | TE Connectivity | FAKRA, 1 POS, EDGE MOUNT, 12 O RoHS : Compliant | 0 | |||
| 6-1879061-4 | TE Connectivity | CPF 0402 3K9 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 3190-6143 | Times Microwave Systems |
| 683 | ||
| DB50906-1 | ITT Interconnect Solutions | RoHS : Compliant |
| 127 | ||
| 3190-6140 | Times Microwave Systems |
| 23 | |||
| 3190-610 | Times Microwave Systems |
| 4 | |||
![]() Powell Electronics | 75-190614-6S | Amphenol Corporation | CONNECTOR |
| 98 | |
| 80-190614-2S | Amphenol Corporation | CONNECTOR |
| 80 | ||
| 75-190614-2S | Amphenol Corporation | CONNECTOR |
| 80 | ||
| 75-190618-11S | Amphenol Corporation | CONNECTOR |
| 46 | ||
| 8-519061-4 | TE Connectivity | Connectors |
| 20 | ||
| 85-190614-5S | Amphenol Corporation | CONNECTOR |
| 18 | ||
| 4-690618-4 | TE Connectivity | Tools |
| 3 | ||
| 2352906-1 | TE Connectivity | Switches |
| 3 | ||
| 10-190618-73S | Amphenol Corporation | CONNECTOR |
| 2 | ||
| 75-190617-10P | Amphenol Corporation | CONNECTOR |
| 2 | ||
| DBAS74-27-8PN090-6117 | TE Connectivity | DBAS7 JAMNUT RCPT PIN |
| 1 | ||
| 1-690618-2 | TE Connectivity | Tools |
| 1 | ||
| R-7906-1 | TE Connectivity | SENSOR R-7906-1 |
| 1 | ||
| DBAS74-19-2PN090-6117 | TE Connectivity | DBAS7 JAMNUT RCPT PIN |
| 1 | ||
| DBAS74-37-924SW090-6117 | TE Connectivity | DBAS7 JAMNUT RCPT SKT |
| 1 | ||
![]() PUI | 7906-15FL1A | 20 | ||||
![]() Chip 1 Exchange | MLX90615SSG-DAG-000-TU | INSTOCK | 6,550 | |||
| MLX90615SSG-DAG-000-TU | Melexis Microelectronic Integrated Systems | INSTOCK RoHS : Compliant | 2,587 | |||
| IDT6V49061PAG8 | Integrated Device Technology Inc | INSTOCK | 2,000 | |||
| 9061030 | INSTOCK | 1,294 | ||||
| CSS5019-0611FSZ | INSTOCK | 1,114 | ||||
| 10-150906-123 | INSTOCK | 420 | ||||
| 09-06-1060 | Molex | INSTOCK RoHS : Compliant | 234 | |||
| 965906-1 | TE Connectivity | INSTOCK RoHS : Compliant | 100 | |||
| 09 06 148 6901 | HARTING Technology Group | INSTOCK | 34 | |||
| CD90-61182-29RN | Murata Manufacturing Co Ltd | INSTOCK | 32 | |||
| CD90-61753-4RN | Murata Manufacturing Co Ltd | INSTOCK | 30 | |||
| CD90-61683-40RN | Murata Manufacturing Co Ltd | INSTOCK | 25 | |||
| 09061322931 | INSTOCK | 16 | ||||
| M3190/6-16-0 | INSTOCK | 5 | ||||
| WP90-61682-27C | Winbond Electronics Corp | INSTOCK | 1 | |||
![]() Avnet Abacus | 5-965906-1 | TE Connectivity | Contact Socket Crimp Straight Cable Mount TR (Alt: 5-965906-1) RoHS : Compliant | 450,000 | ||
| 828906-1 | TE Connectivity | (Alt: 828906-1) RoHS : Compliant | 50,000 | |||
| 1589061-8 | TE Connectivity | (Alt: 1589061-8) RoHS : Compliant | 0 | |||
| 2352906-1 | TE Connectivity | Ethernet Switch 12 Port 1Gbps (Alt: 2352906-1) RoHS : Compliant | 0 | |||
| 7906110000 | Weidmüller Interface GmbH & Co. KG | (Alt: 7906110000) RoHS : Compliant | 0 | |||
| 4-690618-4 | TE Connectivity | (Alt: 4-690618-4) RoHS : Not Compliant | 0 | |||
| 8601290613 | Amphenol Corporation | Obsolete without replacement RoHS : Not Compliant | 0 | |||
| 2-690618-7 | TE Connectivity | (Alt: 2-690618-7) RoHS : Not Compliant | 0 | |||
| 5-177906-1 | TE Connectivity | (Alt: 5-177906-1) RoHS : Compliant | 0 | |||
| 4-690618-6 | TE Connectivity | ANVIL SPLICE TYPE (Alt: 4-690618-6) RoHS : Not Compliant | 0 | |||
| 4-690618-6 | TE Connectivity | ANVIL SPLICE TYPE (Alt: 4-690618-6) RoHS : Not Compliant | 0 | |||
| 1-1589061-3 | TE Connectivity | (Alt: 1-1589061-3) RoHS : Compliant | 0 | |||
| SDR0906-102KL | Bourns Inc | - Tape and Reel (Alt: SDR0906-102KL) RoHS : Compliant | 0 | |||
| SDR0906-152KL | Bourns Inc | - Tape and Reel (Alt: SDR0906-152KL) RoHS : Compliant | 0 | |||
| BTH1-19-06-1-B-SB | TE Connectivity | (Alt: BTH1-19-06-1-B-SB) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | PMST3906,115![]() | Nexperia | Trans GP BJT PNP 40V 0.2A 3-Pin SC-70 T/R (Alt: PMST3906,115) RoHS : Compliant | 0 | ||
| 1-1879061-0 | TE Connectivity | (Alt: 1-1879061-0) RoHS : Compliant | 0 | |||
| DA9061-16AM1 | Renesas Electronics Corporation | Step Down Converter with LDO Regulator 7-OUT 40-Pin QFN Tray (Alt: DA9061-16AM1) RoHS : Not Compliant | 0 | |||
| G888009061THR | Amphenol Corporation | Wire to Board Connector Header Single Row 9 Position 2.54mm Pitch Right Angle Through Hole Bag (Alt: G888009061THR) RoHS : Compliant | 0 | |||
| DA9061-16AMC | Renesas Electronics Corporation | Step Down Converter with LDO Regulator 7-OUT 40-Pin QFN T/R (Alt: DA9061-16AMC) RoHS : Compliant | 0 | |||
| 10132449-0611GBTLF | Amphenol Corporation | (Alt: 10132449-0611GBTLF) RoHS : Compliant | 0 | |||
| DA9061_2_3 ICP KIT | Renesas Electronics Corporation | (Alt: DA9061_2_3 ICP KIT) RoHS : Compliant | 0 | |||
| 0989061010 | Molex | (Alt: 0989061010) RoHS : Compliant | 0 | |||
| 2309690611 | Molex | (Alt: 2309690611) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MSLB9061 | Microchip Technology Inc | MSL1061 Compact 6Channel LED Driver Board (Alt: MSLB9061) RoHS : Compliant | 0 | ||
| DA9061-66AM1 | Renesas Electronics Corporation | Power Management Integrated Circuit 40Pin QFN Tray (Alt: DA9061-66AM1) RoHS : Compliant | 0 | |||
| DA9061-60AM2 | Renesas Electronics Corporation | DASDA906160AM2 (Alt: DA9061-60AM2) RoHS : Compliant | 0 | |||
| DA9061-A0AM2 | Renesas Electronics Corporation | (Alt: DA9061-A0AM2) RoHS : Compliant | 0 | |||
PMST3906,115![]() | Nexperia | Trans GP BJT PNP 40V 02A 3Pin SC70 TR (Alt: PMST3906,115) RoHS : Compliant | 0 | |||
| DA9061-60AM1 | Renesas Electronics Corporation | 85A System PMIC 3 bucks 4 LDO (Alt: DA9061-60AM1) RoHS : Compliant | 0 | |||
| BD90610EFJ-CE2 | ROHM Semiconductor | (Alt: BD90610EFJ-CE2) RoHS : Compliant | 0 | |||
| 5962-9061103XA | Teledyne HiRel | CY7C34425WMB (Alt: 5962-9061103XA) RoHS : Not Compliant | 0 | |||
| DA9061-60AM1BA | Renesas Electronics Corporation | Step Down Converter with LDO Regulator 7OUT 40Pin QFN Tray (Alt: DA9061-60AM1BA) RoHS : Compliant | 0 | |||
| MCP19061T-E/RTB | Microchip Technology Inc | Programmable Mixed Signal Matrix 45 V to 42 V 32 Pins VQFNEP (Alt: MCP19061T-E/RTB) RoHS : Compliant | 0 | |||
| BD90610UEFJ-CE2 | ROHM Semiconductor | (Alt: BD90610UEFJ-CE2) RoHS : Compliant | 0 | |||
| DA9061-0BAMCBA-A | Renesas Electronics Corporation | Step Down Converter with LDO Regulator 7OUT 40Pin QFN (Alt: DA9061-0BAMCBA-A) RoHS : Compliant | 0 | |||
| 5962-9061102XA-XYZ | Teledyne HiRel | QPS59629061102XAXYZ (Alt: 5962-9061102XA) RoHS : Not Compliant | 0 | |||
| M906101JI3B-050.0000 | Microchip Technology Inc | A MEMSbased CMOS oscillator 50 MHz with enabledisable (Alt: M906101JI3B-050.0000) RoHS : Compliant | 0 | |||
| RV1S9061ACCSP-10YC#KC0 | Renesas Electronics Corporation | (Alt: RV1S9061ACCSP-10YC#KC0) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 09-06-1089 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,000 | |
| LM9061M | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 789 | ||
| 507-3906-1473-600 | Dialight | IN STOCK SHIP TODAY |
| 45 | ||
| 507-3906-1431-600 | Dialight | IN STOCK SHIP TODAY |
| 32 | ||
| 103906-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| 507-3906-1432-600 | Dialight | IN STOCK SHIP TODAY |
| 15 | ||
| QMV906-1AF5 | Nortel Networks | IN STOCK SHIP TODAY | 13 | |||
| 507-3906-1474-600 | Dialight | IN STOCK SHIP TODAY |
| 10 | ||
| 09061486901 | HARTING Technology Group | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 507-3906-1476-600 | Dialight | IN STOCK SHIP TODAY |
| 4 | ||
| 507-3906-1571-600 | Dialight | IN STOCK SHIP TODAY |
| 3 | ||
| 213906-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 0906-196-7861 | HARTING Technology Group | IN STOCK SHIP TODAY | 2 | |||
| 9061028-01 | Mupac Corp | IN STOCK SHIP TODAY | 1 | |||
| 906-130-5000 | Amphenol Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 9061 | Heyco | 0 | |||
| 490616 | Essentra Components | 0 | ||||
| HV906120A | Essentra Components | HOOK V-90 STYLESPRING STEEL | 0 | |||
| 490612 | Essentra Components | 0 | ||||
| 96-0-25906-11 | Southco | 0 | ||||
| 490617 | Essentra Components | 0 | ||||
| 490618 | Essentra Components | 0 | ||||
| HV906180A | Essentra Components | HOOK V-90 STYLESPRING STEEL | 0 | |||
| 490619 | Essentra Components | 0 | ||||
| E3-129-061 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| -080906-1-RAF-0 | RAF Electronic Hardware | 0 | ||||
| E3-109-061 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 17W19061 | Essentra Components | FLAT WASHER, .504 ID, 1.969 OD | 0 | |||
| 259061659935 | Essentra Components | 0 | ||||
| 17W19061B | Essentra Components | FLAT WASHER, .504 ID, 1.969 OD | 0 | |||
![]() EBV Elektronik | TB9061AFNG(EL) | Toshiba America Electronic Components | Motor PreDriver Sensorless Three Phase BLDC 6 Outputs 55 to 18 V Sup 40 to 125C SSOP24 (Alt: TB9061AFNG(EL)) RoHS : Compliant | 2,000 | ||
| MCP19061T-E/RTB | Microchip Technology Inc | Programmable Mixed Signal Matrix 45 V to 42 V 32 Pins VQFNEP (Alt: MCP19061T-E/RTB) RoHS : Compliant | 0 | |||
| MB90611APFR-G-BNDE1 | Infineon Technologies AG | MCU 16Bit MB90610A F2MC16L CISC ROMLess 33V5V 100Pin QFP (Alt: MB90611APFR-G-BNDE1) RoHS : Compliant | 0 | |||
| C19061_DAISY-1X1-SHD-MET | LEDIL | Shaderectang1 Posmm D (Alt: C19061_DAISY-1X1-SHD-MET) RoHS : Compliant | 0 | |||
![]() Master Electronics | AZ439-06-1LUS | American ZETTLER Inc | Electromechanical Relay 6PDT 2A 48VDC 1.8KOhm Through Hole RoHS : Compliant |
| 69 | |
| AZ439-06-1H | American ZETTLER Inc | Electromechanical Relay 6PDT 5A 48VDC 1.8KOhm Through Hole RoHS : Compliant |
| 29 | ||
| SDR0906-102KL | Bourns Inc | Inductor Power Wirewound 1mH 10% 1KHz 60Q-Factor Ferrite 220mA 3.5Ohm DCR T/R RoHS : Compliant |
| 0 | ||
| SRR0906-122KL | Bourns Inc | Inductor Power Shielded Wirewound 1.2mH 10% 1KHz 100Q-Factor Ferrite 200mA 4.4Ohm DCR T/R RoHS : Compliant |
| 0 | ||
| 1-1589061-3 | TE Connectivity | QCM019SC2DMC30P = CIRCULAR MOQ Reduction RoHS : Compliant |
| 0 | ||
| CN9061-000 | TE Connectivity | 5012E1839-0-L227 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 6-1879061-2 | TE Connectivity | CPF 0402 3K3 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
| 7906110000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Strip 4 POS Screw Cable Mount 25A RoHS : Not Compliant |
| 0 | ||
| 4-690618-4 | TE Connectivity | ANVIL SPLICE TYPE RoHS : Not Compliant |
| 0 | ||
| DBAS-70-27-0-SN-090-6117 | TE Connectivity | DBAS 70-27-0 SN 090-6117 RoHS : Compliant |
| 0 | ||
| SRR0906-121YL | Bourns Inc | Inductor Power Shielded Wirewound 120uH 15% 1KHz 40Q-Factor Ferrite 650mA 480mOhm DCR T/R RoHS : Compliant |
| 0 | ||
| 889061 | TE Connectivity | ELECTRICAL(MICTOR RA BD/B RoHS : Compliant |
| 0 | ||
| 91H3-19-06-1-C-HE100 | TE Connectivity | 91H3-19-06-1-C-HE100 MOQ Reduction RoHS : Compliant |
| 0 | ||
| HW-07-13-T-D-906-162 | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| DBAS-70-37-3-SN-090-6116 | TE Connectivity | DBAS 70-37-3 SN 090-6116 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 4X90U90618 | Lenovo | Hybrid USB-C Cable |
| 123 | |
| 7906110000 | Weidmüller Interface GmbH & Co. KG | Barrier Terminal Block, 2row 2pos, Enclosed, MK 3/2/E RoHS : Compliant |
| 50 | ||
| 09149061101 | HARTING Technology Group | Heavy Duty Power Connectors HAN DOMINO 6P DD CUBE FE POS.1 RoHS : Compliant |
| 50 | ||
| 1090617 | Phoenix Contact | DIN Rail Terminal Blocks PT 10-HESI (6 3X32) RoHS : Compliant |
| 50 | ||
| 09061482901222 | HARTING Technology Group | 48 Position Din Connector Header, Male Pins Gold-Palladium Through Hole, Right Angle RoHS : Compliant |
| 50 | ||
| 09061486951 | HARTING Technology Group | Connectors, DIN 41612, DIN-POWER F048MR-3,0C1-2 RoHS : Compliant |
| 50 | ||
| MLX90614ESF-DCH-000-TU | Melexis Microelectronic Integrated Systems | Board Mount Temperature Sensors single pixel, 3V, medical acc., 10deg FOV, grad comp RoHS : Compliant |
| 50 | ||
| 09061486921 | HARTING Technology Group | DIN 41612 Connectors DIN-POWER F048MS-3,0C1-2-V1 RoHS : Compliant |
| 41 | ||
| 09061486973 | HARTING Technology Group | DIN 41612 Connectors DIN-POWER F048MS-3,0C1-2-V3 RoHS : Compliant |
| 4 | ||
| EVB90615 | Melexis Microelectronic Integrated Systems | Temperature Sensor Development Tools Evaluation Board for MLX90615 |
| 3 | ||
| 09061316924 | HARTING Technology Group | DIN 41612 Connectors DIN-POWER MH24+7MS-1C1-2 RoHS : Compliant |
| 0 | ||
| 213906-1 | TE Connectivity | Connector Housing CPC Plug Assy 10 Pos. Sz. 17 Series 6 Free Hang Rev Sex RoHS : Compliant |
| 0 | ||
| 09061162511 | HARTING Technology Group | DIN 41612 Connectors DIN-Power H016 MS-3,2C1-1 RoHS : Compliant |
| 0 | ||
| PE229061 | EDGE | 64GB SDXC CLASS 10 (UHS-I U1) MEMORY CAR |
| 0 | ||
| 09061152911222 | HARTING Technology Group | DIN 41612 Connectors DIN PWR H015MS-3 2C1-1-NFF RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE39061 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMP Female to SMA Male Cable Using RG178 Coax., Radio frequency assembly SMP female to SMA male cable using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE39061 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP jack to SMA plug cable assembly PE39061 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE39061 RF cable are available on our downloadable PDF datasheet.PE39061 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. | 380 | ||
| PE39061/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Cable Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to SMP female cable using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assembly has male gender on end 1 and female on end 2. PE39061/HS can also be known as a SMA plug to SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMP jack cable assembly PE39061/HS is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has solder/solder attachment method and beryllium copper body with gold plating.Additional dimensions, specifications and CAD drawings for this PE39061/HS RF cable are available on our downloadable PDF datasheet.PE39061/HS can also be used in the other direction and will be SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 307 | |||
| PE39061/HS-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMP Female Cable 6 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to SMP female cable 6 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable 6 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assembly has male gender on end 1 and female on end 2. PE39061/HS-6 can also be known as a SMA plug to SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMP jack cable assembly PE39061/HS-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has solder/solder attachment method and beryllium copper body with gold plating.Additional dimensions, specifications and CAD drawings for this PE39061/HS-6 RF cable are available on our downloadable PDF datasheet.PE39061/HS-6 can also be used in the other direction and will be SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 76 | ||
| PE39061/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMP Female Cable 36 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to SMP female cable 36 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable 36 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assembly has male gender on end 1 and female on end 2. PE39061/HS-36 can also be known as a SMA plug to SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMP jack cable assembly PE39061/HS-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has solder/solder attachment method and beryllium copper body with gold plating.Additional dimensions, specifications and CAD drawings for this PE39061/HS-36 RF cable are available on our downloadable PDF datasheet.PE39061/HS-36 can also be used in the other direction and will be SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 76 | ||
| PE39061-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female to SMA Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMP female to SMA male cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE39061-12 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP jack to SMA plug cable assembly PE39061-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE39061-12 RF cable are available on our downloadable PDF datasheet.PE39061-12 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 76 | ||
| PE39061-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female to SMA Male Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMP female to SMA male cable 24 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE39061-24 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP jack to SMA plug cable assembly PE39061-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE39061-24 RF cable are available on our downloadable PDF datasheet.PE39061-24 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 76 | ||
| PE39061-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMP Female to SMA Male Cable 36 Inch Length Using RG178 Coax., Radio frequency assembly SMP female to SMA male cable 36 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 36 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE39061-36 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP jack to SMA plug cable assembly PE39061-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE39061-36 RF cable are available on our downloadable PDF datasheet.PE39061-36 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 76 | ||
| PE39061-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female to SMA Male Cable 6 Inch Length Using RG178 Coax., Radio frequency assembly SMP female to SMA male cable 6 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 6 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE39061-6 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP jack to SMA plug cable assembly PE39061-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE39061-6 RF cable are available on our downloadable PDF datasheet.PE39061-6 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 76 | ||
| PE39061-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMA Male Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly SMP female to SMA male cable 9 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 9 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE39061-9 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP jack to SMA plug cable assembly PE39061-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE39061-9 RF cable are available on our downloadable PDF datasheet.PE39061-9 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 76 | ||
| PE39061LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Cable Using RG178 Coax with HeatShrink, LF Solder, RoHS. PE39061LF/HS is a SMA male to SMP female cable using RG178 coax. This Pasternack SMA male to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our male SMA to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39061LF/HS SMA male to SMP female cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W19061 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using RG316 Coax. PE3W19061 is a N male to SMA female cable using RG316 coax. This Pasternack N male to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19061 N male to SMA female cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C9061 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. BNC Male to BNC Female Cable Using Tinned RG402 Coax. PE3C9061 is a BNC male to BNC female cable using RG402 Tinned coax. This Pasternack BNC male to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9061 BNC male to BNC female cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W09061/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. QN Female Bulkhead to N Male Cable Using RG393 Coax with HeatShrink. PE3W09061/HS is a QN female bulkhead to N male cable using RG393 coax. This Pasternack QN female bulkhead to N male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm N for connector 2. Our female QN bulkhead to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09061/HS QN female bulkhead to N male cable assembly is constructed with RG393 coax. | 0 | |||
| PE39061LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Cable Using RG178 Coax. PE39061LF is a SMA male to SMP female cable using RG178 coax. This Pasternack SMA male to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our male SMA to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39061LF SMA male to SMP female cable assembly is constructed with RG178 coax. | 0 | |||
| PE3906-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3906-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3906-12 is built with RG214 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using RG214 coax. |
| 0 | ||
![]() Vyrian | MLX90614ESF-DAA-000-TU | Melexis Microelectronic Integrated Systems | Analog Circuit, 1 Func, MBCY4 RoHS : Compliant | 17,450 | ||
| MLX90614ESF-BCC-000-TU | Melexis Microelectronic Integrated Systems | Analog Circuit, 1 Func, MBCY4 RoHS : Compliant | 14,314 | |||
| MLX90614ESF-BBA-000-TU | Melexis Microelectronic Integrated Systems | Analog Circuit, 1 Func, MBCY4 RoHS : Compliant | 12,034 | |||
| MAX9061EVKIT+ | Analog Devices Inc | RoHS : Compliant | 11,681 | |||
| MLX90614ESF-BCA-000-TU | Melexis Microelectronic Integrated Systems | Analog Circuit, 1 Func, MBCY4 RoHS : Compliant | 11,089 | |||
| MAX9061EVKIT | Analog Devices Inc | 8,315 | ||||
| TLV9061DPWEVM | Texas Instruments | 7,581 | ||||
| TIL906-1 | Texas Instruments | Infrared LED, 880nm | 7,219 | |||
| MAX9061EUK-T | Analog Devices (Maxim Integrated) | 7,155 | ||||
| MAX9061EBS+G45 | Analog Devices Inc | Comparator, 1 Func, 9000uV Offset-Max, BICMOS, PBGA4 RoHS : Compliant | 6,528 | |||
| MAX9061EBS-T | Analog Devices (Maxim Integrated) | 6,504 | ||||
| MAX9061EUK+T | Analog Devices Inc | Comparator, 1 Func, 9000uV Offset-Max, 25000ns Response Time, BICMOS, PDSO5 RoHS : Compliant | 6,380 | |||
| MAX9061EBS+TG45 | Analog Devices Inc | Comparator, 1 Func, 9000uV Offset-Max, 25000ns Response Time, BICMOS, PBGA4 RoHS : Compliant | 5,430 | |||
| MAX9061EBS-TG45 | Analog Devices (Maxim Integrated) | 5,305 | ||||
MAX9061EUK+![]() | Maxim Integrated Products | Comparator, 1 Func, 9000uV Offset-Max, BICMOS, PDSO5 RoHS : Compliant | 745 | |||
![]() Waytek, Inc. | 3210190613 | ShawCor Ltd | DSG-Canusa 3210190613 heat shrink is green/yellow 3/4" polyolefin tubing on a 200' spool. It identifies ground wires and terminals, is rated for 1 kV and 90C continuous use, and provides flexible, flame-retardant insulation that resists oils, chemicals, and fungus. |
| 1,600 | |
| 124-906 124-105211 | White-Rodgers | Power Relay Contactor 12V 100A SPNO White-Rodgers 124-906 400A INRUSH GROUNDED COIL |
| 51 | ||
![]() Win Source Electronics | TLV9061IDBVR![]() | Texas Instruments | IC CMOS 1 CIRCUIT SOT23-5 / CMOS Amplifier 1 Circuit Rail-to-Rail SOT-23-5 RoHS : Compliant |
| 417,000 | |
| TLV9061SIDBV | Texas Instruments | Operational Amplifier 1-Channel 10MHz 15V SOT-23 with Shutdown |
| 209,216 | ||
TLV9061IDCKR![]() | Texas Instruments | IC CMOS 1 CIRCUIT SC70-5 / CMOS Amplifier 1 Circuit Rail-to-Rail SC-70-5 RoHS : Compliant |
| 50,000 | ||
TLV9061SIDBVR![]() | Texas Instruments | IC CMOS 1 CIRCUIT SOT23-6 RoHS : Compliant |
| 40,000 | ||
| BD90610EFJ-CE2 | ROHM Semiconductor | IC REG BUCK ADJ 1.25A 8HTSOP-J RoHS : Compliant |
| 17,500 | ||
| MLX90614ESF-DCC-000-TU | Melexis Microelectronic Integrated Systems | SENSOR TEMPERATURE PWM SMBUS RoHS : Compliant |
| 9,800 | ||
LM9061MX![]() | Texas Instruments | Driver 1.35V 1-OUT High Side Non-Inv 8-Pin SOIC T/R | ICMOSFET DVR W/LOSS PROT 8-SOIC RoHS : Not Compliant |
| 2,961 | ||
LM9061M![]() | Texas Instruments | High-Side Protection Controller | IC DRIVER MOSF W/LOSS PROT 8SOIC RoHS : Not Compliant |
| 2,961 | ||
LM9061M/NOPB![]() | Texas Instruments | High-Side Protection Controller | IC DRIVER MOSF W/LOSS PROT 8SOIC RoHS : Compliant |
| 2,961 | ||
| MLX90614ESF-BCC-000-TU | Melexis Microelectronic Integrated Systems | SENSOR TEMP PWM SMBUS TO39 RoHS : Compliant |
| 2,752 | ||
| MLX90614ESF-DCI-000-TU | Melexis Microelectronic Integrated Systems | SENSOR DGTL -40C-85C TO39 / Temperature Sensor Digital, Infrared (IR) -40°C ~ 85°C 16 b TO-39 RoHS : Compliant |
| 1,888 | ||
| 09061486901 | HARTING Technology Group | CONN DIN HDR 48POS PCB RA / 48 (Power) Position Din Connector Header, Male Pins Through Hole, Right Angle RoHS : Compliant |
| 1,240 | ||
| 09061486901222 | HARTING Technology Group | CONN DIN HDR 48POS RoHS : Compliant |
| 1,140 | ||
| MLX90614ESF-ACC-000-TU | Melexis Microelectronic Integrated Systems | SENSOR DGTL -40C-85C TO39 / Temperature Sensor Digital, Infrared (IR) -40°C ~ 85°C 16 b TO-39 RoHS : Compliant |
| 326 | ||
| MLX90615SSG-DAG-000-TU | Melexis Microelectronic Integrated Systems | SENSOR TEMP PWM SMBUS TO46-4 RoHS : Compliant |
| 100 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |