 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
8906 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Future Electronics | 8906 | SD1 | 8900 Series 0.065 x 48 x 50 inch 2-Layer Rubber Gray Mat Roll RoHS : Compliant |
| 0 | |
 Verical | 8906K2504 | Eaton Corporation | 8906K2504 |
| 59 | |
| 8906K3185 | SAFRAN | 8906K3185 |
| 50 | ||
| 8906K5205 | SAFRAN | 8906K5205 |
| 18 | ||
| 8906K4264 | SAFRAN | 8906K4264 |
| 9 | ||
| 8906K4265 | SAFRAN | 8906K4265 |
| 5 | ||
| 8906K4301 | SAFRAN | 8906K4301 |
| 4 | ||
 Avnet Americas | 39-28-9068 | Molex | Pin Header, 6 Contacts, 2 Rows, 4.2mm, Gold, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT - Trays (Alt: 0039289068) RoHS : Compliant |
| 28,183 | |
| 66089-8906 | TTM Technologies | Whip Antenna, Single Band, Slant, Vertical, 898 MHz, UFL Connector - Bulk (Alt: 66089-8906) RoHS : Compliant |
| 0 | ||
| 808906-1 | TE Connectivity | - Bulk (Alt: 808906-1) RoHS : Not Compliant | 0 | |||
| 928906-2 | TE Connectivity | - Bag (Alt: 928906-2) RoHS : Compliant | 0 | |||
| FW-20-05-F-D-389-065 | Samtec Inc | Board Stackers & Spacers, Pin Header, 9.88 mm, 40 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Bulk (Alt: FW-20-05-F-D-389-065) RoHS : Compliant | 0 | |||
| 71308-9061 | Molex | - Bulk (Alt: 0713089061) RoHS : Not Compliant | 0 | |||
| 1-1589061-3 | TE Connectivity | - Bulk (Alt: 1-1589061-3) RoHS : Compliant |
| 0 | ||
| 2489063-1 | TE Connectivity | EMI VENT AL HONEYCOMB 304.8MM X 152.4MM - Bag (Alt: 2489063-1) RoHS : Not Compliant |
| 0 | ||
| 2589060000 | Weidmüller Interface GmbH & Co. KG | CD 17X15 4/6 GY - Bulk (Alt: 2589060000) RoHS : Not Compliant | 0 | |||
| 26-48-9063 | Molex | - Bulk (Alt: 0026489063) RoHS : Compliant |
| 0 | ||
| 10129378-906001BLF | Amphenol Corporation | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 6 Contacts, Through Hole Straight - Bag (Alt: 10129378-906001BLF) RoHS : Compliant |
| 0 | ||
| 1-1589068-0 | TE Connectivity | - Bulk (Alt: 1-1589068-0) RoHS : Not Compliant | 0 | |||
| 1589065-1 | TE Connectivity | - Bulk (Alt: 1589065-1) RoHS : Compliant | 0 | |||
| 1589069-7 | TE Connectivity | - Bulk (Alt: 1589069-7) RoHS : Not Compliant | 0 | |||
| 7100038906 | 3M Interconnect | EXL UNITIZED WHEEL, XL-UW, 3S FINE, 3 IN - Bulk (Alt: 7100038906) RoHS : Not Compliant |
| 0 | ||
 Mouser Electronics | 8906 | Keystone Electronics Corp | LED Mounting Hardware UNIVERSAL MNT .24" .255" (6.5mm) DIA RoHS : Compliant |
| 15,783 | |
| 8906 | SCS | Anti-Static Control Products Mat Roll, 2-Layer Rubber, 8900 Series, Gray, 0.065"X48"X50' RoHS : Not Applicable |
| 0 | ||
| 890-6000 | Dialight | Panel Mount Indicator Housings & Hardware Hardware Kit Spacer |
| 0 | ||
| 890-674 | WAGO Innovative Connections | Terminal Block Tools & Accessories Mounting plate 4-pole, white RoHS : Compliant |
| 0 | ||
| 890-625 | WAGO Innovative Connections | Terminal Block Tools & Accessories Mounting plate 5-pole, black RoHS : Compliant |
| 0 | ||
| 8906.2 | Altech Corporation | Terminal Block Interface Modules Interface Relay Module, 1 Ch |
| 0 | ||
| 8906K2743 | Eaton Corporation | Eaton Corporation 1T (WABCO) |
| 0 | ||
| 8906K3503 | Eaton Corporation | Eaton Corporation 2LF (CARRIER TRANSICOLD) |
| 0 | ||
| 890-615 | WAGO Innovative Connections | Pluggable Terminal Blocks T-distribution connector; 3-pole; Cod. A; 1 input; 2 outputs; 3 locking levers; for flying leads; black RoHS : Compliant |
| 0 | ||
| 890-601 | WAGO Innovative Connections | Terminal Block Tools & Accessories Fixing pin; 5 mm , for 1.5 ... 2.5 mm mounting plates; Plastic; black RoHS : Compliant |
| 0 | ||
| 890-623 | WAGO Innovative Connections | Terminal Block Tools & Accessories Mounting plate; 3-pole; for distribution connectors; Plastic; black RoHS : Compliant |
| 0 | ||
| 890-642 | WAGO Innovative Connections | Terminal Block Tools & Accessories Lockout cap; 2-pole; for cutouts; Plastic; black RoHS : Compliant |
| 0 | ||
| 890-621 | WAGO Innovative Connections | Pluggable Terminal Blocks T-distribution connector; 5-pole; Cod. A; 1 input; 2 outputs; 2 locking levers; black RoHS : Compliant |
| 0 | ||
| 890-673 | WAGO Innovative Connections | Terminal Block Tools & Accessories Mounting plate; 3-pole; for distribution connectors; Plastic; white RoHS : Compliant |
| 0 | ||
| 890-624 | WAGO Innovative Connections | Terminal Block Tools & Accessories Mounting plate; 4-pole; for distribution connectors; Plastic; black RoHS : Compliant |
| 0 | ||
 Newark | 8489 060100 | Belden Inc | Unshielded Multiconductor Cable, 4 Condu; |Belden 8489 060100 RoHS : Compliant |
| 807 | |
M20-8890645R | Harwin | Conn, R/A Header, 6Pos, 1Row, 2.54Mm; Connector Systems:Board-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:6Contacts; Contact Termination Type:Surface Mount Right Angle; Product Range:M20 Series Rohs Compliant: Yes RoHS : Compliant |
| 447 | ||
| 66089-8906 | Anaren Microwave | Antenna, 898Mhz, 6Mm, Air Module; |Anaren 66089-8906 RoHS : Compliant |
| 200 | ||
| M20-8890645R | Harwin | Conn, R-A Header, 6Pos, 1Row, 2.54Mm; |Harwin M20-8890645R RoHS : Compliant |
| 110 | ||
| 89068405SP | nVent Hoffman | Filter Air Reusable Qty 4; |Nvent Hoffman 89068405SP RoHS : Compliant |
| 54 | ||
| FMCA2890-60 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2890-60 RoHS : Not Compliant |
| 17 | ||
| 5890-6 | Brady Worldwide Inc | B997 Bradylite N&l Refl Yel/Blk 5890-6/; |Brady 5890-6 RoHS : Not Compliant |
| 8 | ||
| BE-8906 | Bahco | Screwdriver, Torx T6X75Mm; |Ergo Bahco BE-8906 (Alternate Part Number: 7314150027729 RoHS : Not Compliant |
| 6 | ||
| 2489063-1 | TE Connectivity | Emi Vent Al Honeycomb; |Te Connectivity 2489063-1 RoHS : Compliant |
| 5 | ||
| 2489060-1 | TE Connectivity | Emi Vent Al Honeycomb; |Te Connectivity 2489060-1 RoHS : Compliant |
| 5 | ||
| 2489068-1 | TE Connectivity | Emi Vent Al Honeycomb; |Te Connectivity 2489068-1 RoHS : Compliant |
| 5 | ||
| 89061739SP | nVent Hoffman | Htr Mtng Brkt; |Nvent Hoffman 89061739SP RoHS : Compliant |
| 1 | ||
| 89061554SP | nVent Hoffman | Swt Lmt P100Ac1C 5 20 Psi; |Nvent Hoffman 89061554SP RoHS : Compliant |
| 1 | ||
| 8906 | Keystone Electronics Corp | Led Spacer ((Nw)); |Keystone 8906 RoHS : Not Compliant |
| 0 | ||
| 8906 | SCS | Dissipative Mat Roll, 48" X 50Ft; Mat Type:2 Layer Dissipative Mat Roll; Mat Colour:Gray; Mat Material:Rubber; Ground Terminal Type:No Grounding Hardware Included; Width - Imperial:48"; Length - Imperial:50Ft; Length - Metric:15.2M Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
 RS | ROX2SJ1M0 (2-1625890-6) | TE Connectivity | RESISTOR, METAL OXIDE, RES 1 MEGOHMS, PWR-RTG 2 W, TOL 5%, AXIAL |
| 4,000 | |
| 6-1625890-6 | TE Connectivity | RESISTOR, METAL OXIDE, RES 68 OHMS, PWR-RTG 2 W, TOL 5%, AXIAL RoHS : Compliant |
| 3,948 | ||
| 0828906 (US-EMLP (60X30) SR) | Phoenix Contact | PLASTIC LABEL;CARD;SILVER;UNLABELED;THERMOMARK CARD;ADHESIVE;4PCX10 |
| 29 | ||
| 64589060 | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER SIREN, 8 TONE, 102DB, 70MM, 115-230 VAC, IP65, BLACK, KOMBISIGN 71 |
| 14 | ||
| 128906 | RS Pro | NITRILE RUBBER O-RING 11.6MM BORE 16.4MM O.D -30 - +120 DEG C |
| 10 | ||
| 39-28-9068 (5566-06B2GS-210) | Molex | HEADER 4.20MM, D/R, VERT, PCB LOCK, 6W |
| 10 | ||
| 1828906 | RS Pro | SERIAL/PARALLEL CABLE 19.7FT (6M) D25 MALE-D25 FEMALE GRAY PVC SHEATH |
| 8 | ||
| 541009 (00051128906279) | 3M | STANDARD ABRASIVES QUICK CHANGE TS SOFT DISC PAD 541009, 3 IN |
| 5 | ||
| 541011 (00051128906224) | 3M | STANDARD ABRASIVES QUICK CHANGE TS FIRM DISC PAD 541011, 3 IN |
| 5 | ||
| 2328906 | RS Pro | DIN CABLE ASSEMBLY 9 CONDUCTOR MALE MOULDED PLUG TO UNTERMINATED 6.56FT BLACK |
| 4 | ||
| 50890603 | WIKA Instrument LP | PRESSURE SENSOR;A-10;30" HG/100 PSI;4-20MA;1/4" NPT;DIN |
| 2 | ||
| E89061 | ifm efector inc | WALL BRACKET; 96.5 X 62 X 72 MM; FOR DV LIGHT TOWER |
| 1 | ||
| 2508906 | RS Pro | THERMAL OVERLOAD RELAY, 1NC/1NO, 50 A CONTACT RATING, 6 W, 4000 V AC |
| 1 | ||
| 8906 | Keystone Electronics Corp | SPACER, LED MOUNT, UNIVERSAL, L .240, FOR T-1 & T-1 3/4 LED, PVC, UL 94V-0 RoHS : Compliant |
| 0 | ||
| 8906 | SCS | MAT ROLL, 2-LAYER RUBBER, 8900 SERIES, GRAY, 0.065"X48"X50' |
| 0 | ||
 Bisco Industries | NAS1189-06T7B | Parker Fasteners | 18,800 | |||
| 089-06954-0406 | SEMS SCREWS | 8,729 | ||||
| 3890642075 | Schrader Pacific Advanced Valves | 3,025 | ||||
| 089-06954-0404 | SEMS SCREWS | 2,826 | ||||
| 089-06585-0000 | SOCKET SCREWS | 525 | ||||
| 089-06200-0002 | SOCKET SCREWS | 400 | ||||
| NAS1189-06P4W | NAS Screws | 130 | ||||
| 089-06541-0000 | North East Fasteners Corporation | 105 | ||||
| NAS1189-06T6B | CBS Fasteners Inc | 75 | ||||
| 089-06123-004 REV 4 | 50 | |||||
| NAS1189-06P7B | NAS MACHINE SCREWS | 15 | ||||
| 380-389-060 | Superior Washer & Gasket Company | 13 | ||||
| NAS1189-06P6 | NAS MACHINE SCREWS | 10 | ||||
| IBX-2789-06 | MISC. POWER SUPPLIES | 1 | ||||
| NAS1189-06P4L | CBS Fasteners Inc | 1 | ||||
 Onlinecomponents.com | 8906 | ICO Rally | HIX SHRINKABLE POLYOLEFIN, RoHS : Compliant |
| 0 | |
| 8906 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 8906 | SCS | 8906 Table Roll, 2-Layer Rubber, 8900 Series, Gray, 0.065in x 48in x 50ft RoHS : Compliant |
| 0 | ||
| 39513-8906 | Molex | 3.81MM EURO PLUG VERT FWE GRN 11AV AU 6C RoHS : Compliant |
| 0 | ||
| 39533-8906 | Molex | 5.08MM EURO PLUG VERT FWE GRN 11AV AU 6C RoHS : Compliant |
| 0 | ||
| 39537-8906 | Molex | 5.08MM EURO PLUG VERT ME FWE GRN AU 11AV RoHS : Compliant |
| 0 | ||
| VCA-8906 | Quest Technology International Inc | RoHS : Compliant |
| 0 | ||
| 39523-8906 | Molex | 5.0MM EURO PLUG VERT FWE GRN 11AV AU 6CK RoHS : Compliant |
| 0 | ||
| 39517-8906 | Molex | 3.81MM EURO PLUG VERT ME FWE GRN 11AV AU RoHS : Compliant |
| 0 | ||
| 7-8906 | Amphenol Industrial Operations | CONNPLUG RoHS : Compliant |
| 0 | ||
| 63801-8906 | Molex | CRIMP ADAPTER W/ SAFETY GUARD FOR UP60 RoHS : Compliant |
| 0 | ||
| 11-31-8906 | Molex | PANDUCT RoHS : Compliant |
| 0 | ||
 Sager | 8906 | Calex Mfg Co Inc | Signal Conditioning |
| 0 | |
| 8906 | Keystone Electronics Corp | LED Mounting Hardware UNIVERSAL MNT .24 .255 (6.5mm) DIA RoHS : Compliant |
| 0 | ||
| 808906-1 | TE Connectivity | Bench Top Tools BLOCK ADJ. STOP | 0 | |||
| 0022289063 | Molex | Headers & Wire Housings KK 100 Hdr Assy RA Bkwy 06 Ckt 15 SGold RoHS : Compliant | 0 | |||
| 04-0989-0662 | TE Connectivity | RT9420-0003-121-1130 |
| 0 | ||
| FW-20-05-F-D-389-065 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 0890670051 | Molex | D-Sub Standard Connectors | 0 | |||
| 1-1589061-3 | TE Connectivity | Standard Circular Connector QCM019SC2DMC30P RoHS : Compliant |
| 0 | ||
| 2489063-1 | TE Connectivity | EMI VENT AL HONEYCOMB 304.8MM X 152.4MM |
| 0 | ||
| 0539890615 | Molex | I/O Connectors 2.0 I/O MOLD COVER A | 0 | |||
| YS8906 | TE Connectivity | Antennas YAGI,SS,6,806-960MHz , | 0 | |||
| 0890671063 | Molex | Molex | 0 | |||
| 1-1589068-0 | TE Connectivity | RF Connectors / Coaxial Connectors CX045PC2RC036Q = Coax RoHS : Not Compliant | 0 | |||
| 1589069-7 | TE Connectivity | RF Connectors / Coaxial Connectors CX045SC2RC006Q = Coax RoHS : Not Compliant | 0 | |||
| 0026489065 | Molex | Headers & Wire Housings 156 KK Bkwy Hdr RA SqP Tin 6Ckt | 0 | |||
 TME | 10129378-906001BLF | Amphenol Corporation | Connector: pin strips; male; PIN: 6; soldering,THT; 3A; straight |
| 12,000 | |
| 1089064 | Bossard Group | Nut; hexagonal; M8; 1.25; steel; none; 13mm; BN 115; DIN 934 |
| 1,500 | ||
| 8906 | Keystone Electronics Corp | Spacer sleeve; LED; Øout: 6.5mm; ØLED: 5mm; L: 6.1mm; black; UL94V-0 RoHS : Compliant |
| 544 | ||
| 578001890600002 | Honeywell Sensing and Control | Potentiometer: shaft |
| 9 | ||
| 1-1589066-3 | TE Connectivity | Connector: D-Sub RoHS : Not Compliant |
| 4 | ||
| 0778906110100 | ALPS MAYKESTAG GmbH | Rotary burr; Ø: 10mm; L: 65mm; Working part len: 20mm; 6mm; metal; 9 |
| 1 | ||
| 00189060 | GSR | Tap: metric-set; Tr 14; left hand thread,trapezoidal; 3; L: 130mm |
| 0 | ||
| 0788906108100 | ALPS MAYKESTAG GmbH | Rotary burr; Ø: 8mm; L: 65mm; Working part len: 18mm; 6mm; metal; 9 |
| 0 | ||
| 0788906112100 | ALPS MAYKESTAG GmbH | Rotary burr; Ø: 12mm; L: 70mm; Working part len: 25mm; 6mm; metal; 9 |
| 0 | ||
| M20-8890645R | Harwin | Connector: pin strips; socket; male; PIN: 6; Indess; 3A; SMT; on PCBs RoHS : Compliant |
| 0 | ||
| PAM8906M1012-13 | Diodes Incorporated | IC: driver; piezo sounder; MSOP10; 2.1÷5.5VDC RoHS : Compliant |
| 0 | ||
| SKKT 215/18 E 07890620 | SEMIKRON | Module: thyristor; double series; 1.8kV; 215A; SEMIPACK2; Ifsm: 7kA |
| 0 | ||
| SO789060 | celduc relais | Relay: solid state; Ucntrl: 3.5÷32VDC; 125A; 24÷690VAC; SO7 |
| 0 | ||
| 84008906 | WERMA SIGNALTECHNIK GMBH + CO KG | Automation module: base; IP54; KombiSIGN 70; -20÷50°C |
| 0 | ||
| 0778906106100 | ALPS MAYKESTAG GmbH | Rotary burr; Ø: 6mm; L: 50mm; Working part len: 16mm; 6mm; metal; 9 |
| 0 | ||
 Interstate Connecting Components | 928906-2 | TE Connectivity | RoHS : Compliant |
| 0 | |
| 04-0989-0662 | TE Connectivity | RT9420-0003-121-1130 | 0 | |||
| 1-1589061-3 | TE Connectivity | QCM019SC2DMC30P = CIRCULAR RoHS : Compliant |
| 0 | ||
| 249-8589-067 | ITT Interconnect Solutions | 2498589067 | 0 | |||
| 10129378-906001BLF | Amphenol FCi | 10129378-906001BLF-HEADER SR V RoHS : Compliant |
| 0 | ||
| 1-1625890-6 | TE Connectivity | 2W SM M/OX 5% 180K RoHS : Compliant |
| 0 | ||
| 1614890-6 | TE Connectivity | CPF 0805 6R04 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 04-0989-0626 | TE Connectivity | RT9420-0002-221-1110 | 0 | |||
| 289-0641MTF4 | Glenair Inc | D-SUB CONNECTOR | 0 | |||
| 796189-061 | TE Connectivity | EPKT-2043 | 0 | |||
| CP2989-064 | TE Connectivity | POLT-24F/1XI-L20A RoHS : Unknown | 0 | |||
| 7-1614890-6 | TE Connectivity | CPF 0805 36R5 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 249-8589-065 | ITT Interconnect Solutions | 2498589065 | 0 | |||
| 01260889-066 | ITT Interconnect Solutions | 46687IE-14AT89 | 0 | |||
| 289-068Z1 | Glenair Inc | HIPER-D ACCESSORY | 0 | |||
 NexGen Digital | 1589061-4 | TE Connectivity | RoHS : Compliant | 14 | ||
 PEI Genesis | 7-8906 | Amphenol Corporation | RoHS : Compliant |
| 0 | |
| 10-189066-285 | Amphenol Corporation |
| 0 | |||
| M24758/9-06-09-03-A | SOURIAU-SUNBANK |
| 0 | |||
| M24758/9-06-16-01-A | SOURIAU-SUNBANK |
| 0 | |||
| 890-6000 | Dialight |
| 0 | |||
| F2-742389-06K | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 172890-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 71,330 | |
| 10168906-002LF | Amphenol FCi | Cable Assembly |
| 49,500 | ||
| 228906-2 | TE Connectivity | TE COMPONENT (REF 228906-2) |
| 6,865 | ||
| 6-1625890-6 | TE Connectivity | Resistors RoHS : Compliant |
| 6,576 | ||
| 1-1625890-6 | TE Connectivity | Resistors RoHS : Compliant |
| 2,310 | ||
| 5308 906 | Altech Corporation | NPT3/4 Cord Grip, 7.0 - 16.0mm |
| 411 | ||
| 1589062-2 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 87 | ||
| M80-8890605 | Harwin | Headers & Wire Housings RoHS : Compliant |
| 28 | ||
| 578000890600001 | Honeywell Sensing and Control | Switch |
| 24 | ||
| 1589069-4 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 9 | ||
| 578001890600002 | Honeywell Sensing and Control | Switch |
| 6 | ||
| 289-062Z1S1 | Glenair Inc | HIPER-D ACCESSORY - RECTANGULAR CONN |
| 5 | ||
| 10-189066-285 | Amphenol Corporation | Connector |
| 4 | ||
| 5308-906 | Altech Corporation | Cable Glands, Strain Reliefs & Cord Grip |
| 1 | ||
| 768-0389-06 | TE Connectivity | DEUTSCH CONNECTOR 768-0389-06 |
| 1 | ||
 PUI | 12.89069 | 12,023 | ||||
| 12.89062 | 2,362 | |||||
| 12.89068 | 640 | |||||
| 12.89064 | 500 | |||||
 Richardson RFPD | SI5332DD08906-GM3 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT Auto RoHS : Compliant | 0 | ||
| 85089069 | HUBER+SUHNER | Tools, Rotating Stripping Tool with Stripping Leng RoHS : Compliant |
| 0 | ||
| SI5332DD08906-GM3R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
 Chip 1 Exchange | 172890-6 | TE Connectivity | INSTOCK RoHS : Compliant | 151,171 | ||
| 55289-0608 | Molex | INSTOCK RoHS : Compliant | 52,000 | |||
| 12.89069 | Geyer Electronic E K | INSTOCK | 11,023 | |||
| 2-1625890-6 | TE Connectivity | INSTOCK RoHS : Compliant | 10,400 | |||
| 39-28-9068 | Molex | INSTOCK RoHS : Compliant | 4,700 | |||
| 6189-0641 | INSTOCK | 3,770 | ||||
| 6189-0640 | INSTOCK | 922 | ||||
| 12.89068 | Geyer Electronic E K | INSTOCK | 640 | |||
| 12.89064 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 500 | |||
| 12.89062 | Geyer Electronic E K | INSTOCK | 362 | |||
| DIC18906-2 | KEMET Corporation | INSTOCK | 103 | |||
 Avnet Abacus | 828906-1 | TE Connectivity | (Alt: 828906-1) RoHS : Compliant | 50,000 | ||
| 10129378-906001BLF | Amphenol Corporation | Pin Header BoardtoBoard 254 mm 1 Rows 6 Contacts Through Hole Straight (Alt: 10129378-906001BLF) RoHS : Compliant | 12,000 | |||
| M80-8890605 | Harwin | Rectangular Connector Dual in Line Datamate LTek M80 6 Contacts Receptacle 2 mm Crimp 2 Row (Alt: M80-8890605) RoHS : Compliant | 516 | |||
| 1689064 | Phoenix Contact | Connector InLine Adapter 8P8C RJ45 Jack8P8C RJ45 Jack (Alt: 1689064) RoHS : Compliant | 25 | |||
| 10789065 | Aptiv PLC | Contact SKT Crimp ST Cable Mount Reel (Alt: 10789065) RoHS : Compliant | 0 | |||
| 989061011 | Molex | (Alt: 989061011) RoHS : Compliant | 0 | |||
| 1589061-8 | TE Connectivity | (Alt: 1589061-8) RoHS : Compliant | 0 | |||
| 489063-000 | TE Connectivity | AMP489063000 (Alt: 489063-000) RoHS : Compliant | 0 | |||
| 4-176890-6 | TE Connectivity | - Tape and Reel (Alt: 4-176890-6) RoHS : Compliant | 0 | |||
| 890679-000 | TE Connectivity | (Alt: 890679-000) RoHS : Compliant | 0 | |||
| 1-1589061-3 | TE Connectivity | (Alt: 1-1589061-3) RoHS : Compliant | 0 | |||
| 1-1589060-1 | TE Connectivity | (Alt: 1-1589060-1) RoHS : Compliant | 0 | |||
| 1-1589065-5 | TE Connectivity | (Alt: 1-1589065-5) RoHS : Compliant | 0 | |||
| 8-2151890-6 | TE Connectivity | (Alt: 8-2151890-6) RoHS : Not Compliant | 0 | |||
| 191-2890-671 | Amphenol Corporation | BEN1912890671 (Alt: 191-2890-671) RoHS : Compliant | 0 | |||
Avnet Asia | 2389065-1 | TE Connectivity | BUS BAR ASSEMBLY, CROWN CLIP SOCKET,4KW (Alt: 2389065-1) RoHS : Compliant | 0 | ||
| 8906-0180-40 | Qnity Laird | (Alt: 8906-0180-40) RoHS : Compliant | 0 | |||
| 0989061010 | Molex | (Alt: 0989061010) RoHS : Compliant | 0 | |||
 Avnet Silica | PAM8906M1010-13 | Diodes Incorporated | (Alt: PAM8906M1010-13) RoHS : Compliant | 2,500 | ||
| PAM8906M1018-13 | Diodes Incorporated | (Alt: PAM8906M1018-13) RoHS : Compliant | 0 | |||
| PAM8906M1012-13 | Diodes Incorporated | (Alt: PAM8906M1012-13) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 4-176890-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 720 | ||
| M20-8890645 | Harwin | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| 615238-906 | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 69 | |||
| 87089-0616 | Molex | IN STOCK SHIP TODAY RoHS : Not Compliant | 20 | |||
 DB Roberts | F8906 | Heyco | CONDUIT CLIP 21MM FCL21/BL RoHS : Compliant | 0 | ||
 EBV Elektronik | HEDS-8906 | Broadcom Limited | Alignment Tool For Three Channel Optical Incremental Encoder Modules (Alt: HEDS-8906) RoHS : Compliant | 0 | ||
 FDH Electronics | M22759/11-28-906 | Whitmore/Wirenetics | Hook-Up Wire | 79,170 | ||
| M22759/33-28-906 | Whitmore/Wirenetics | Wire and Cable | 19,168 | |||
| 8906K3185 | Safran Electrical & Power UK | Switches | 106 | |||
| 8906K3157 | Safran Electrical & Power UK | Switches | 53 | |||
| 85002618906 | SOURIAU-SUNBANK | Connector Acc |
| 50 | ||
| 8906K4267 | Safran Electrical & Power UK | Switches |
| 10 | ||
| 8906K3158 | Safran Electrical & Power UK | Switches | 1 | |||
| 8906K5236 | Safran Electrical & Power UK | Switches | 0 | |||
| 289-062Z1S1 | Glenair Inc | Connector | 0 | |||
| 8906K4734 | Safran Electrical & Power UK | Switches | 0 | |||
 Master Electronics | 1-1625890-6 | TE Connectivity | 2W SM M/OX 5% 180K RoHS : Compliant |
| 3,500 | |
| 10129378-906001BLF | Amphenol FCi | Header Sr Vt Th 1X6-10129378-906001BLF | Amphenol Fci (amphenol Cs) 10129378906001BLF RoHS : Compliant |
| 300 | ||
| A98906L20 | ITT Interconnect Solutions | 3938534003 / 393-8534-003 / Circular RoHS : Compliant |
| 0 | ||
| 928906-2 | TE Connectivity | FF 110 TAB 20-15 AWG .016 TPPB MOQ Reduction RoHS : Compliant |
| 0 | ||
| 04-0989-0662 | TE Connectivity | RT9420-0003-121-1130 RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-189-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-089-069 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-089-068 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-20-05-F-D-389-065 | Samtec Inc | Conn Board Stacker HDR 40 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-36-02-G-D-089-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-14-04-G-D-089-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-189-066 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-289-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1-1589061-3 | TE Connectivity | QCM019SC2DMC30P = CIRCULAR MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2489063-1 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
 Neutron USA | 5308 906 | Altech Corporation | Cable Mounting & Accessories NPT3/4 CORD GRIP 7.0-16.0mm LT Gry |
| 50 | |
| 8489 060100 | Belden Inc | Multi-Conductor Cables 18AWG 4C UNSHLD 100ft SPOOL CHROME |
| 50 | ||
| 10889065 | Aptiv PLC | Connectors 34 way M Hybrid 1.5 2.8 SICMA Panel Through Sealed Connector |
| 50 | ||
| 7010.9890.63 | Schurter Electronic Components | Cartridge Fuses 172876 F 125V 7A RoHS : Compliant |
| 50 | ||
| 1989060000 | Weidmüller Interface GmbH & Co. KG | Industrial Relays RCL424012T RoHS : Compliant |
| 12 | ||
| 2289065 | Phoenix Contact | Ribbon Cables / IDC Cables FLK 50/EZ-DR/ 50 /KONFEK RoHS : Compliant |
| 2 | ||
| 50890603 | WIKA Instrument LP | Pressure sensor;A-10;30" HG/100 PSI;4-20MA;1/4" NPT;DIN |
| 0 | ||
| 1689064 | Phoenix Contact | Modular Connectors / Ethernet Connectors RJ45 INSERT SKT/SKT RoHS : Compliant |
| 0 | ||
| SMR4890-6 | Crydom Inc | Solid State Relays - Industrial Mount PM Monitoring SSR 530VAC/90A RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C6890-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated BNC Male to N Male Low Loss Cable 60 Inch Length Using LMR-200-FR Coax With Times Microwave Components., Radio frequency assembly fire rated BNC male to N male low loss cable 60 inch length using LMR-200-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated BNC male to N male low loss cable 60 inch length using LMR-200-FR coax with Times Microwave components, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and N type cable connection on the other. Our low loss BNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C6890-60 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C6890-60 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6890-60 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to N type cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated BNC male to N male low loss cable 60 inch length using LMR-200-FR coax with Times Microwave components. |
| 431 | |
| PE38890-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 6 inches. UMCX Plug to MCX Plug Cable 6 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX plug cable 6 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX plug cable 6 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and MCX cable connection on the other. Our right angle UMCX to MCX cable assemblies have a plug gender on end 1 and plug on end 2. This UMCX to MCX cable is a plug to plug coax assembly, PE38890-6, can also be known as a right angle UMCX male to MCX male cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX male cable assembly PE38890-6 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38890-6 can also be used in the other direction and will be MCX plug to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX plug cable 6 inch length using RG178 coax. |
| 179 | ||
| PE3W21890-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male Right Angle to SMA Male Right Angle Cable 6 Inch Length Using TCOM-240-FR Coax., Pasternack’s PE3W21890-6 right angle SMA male to right angle SMA male RF cable assembly using TCOM-240-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21890-6 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.88-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W21890-6 RF cable has an FRPE jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. This PE3W21890-6 SMA plug to SMA plug cable assembly is built with TCOM-240-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. This SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 128 | ||
| PE3W08890-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male Right Angle to SMA Male Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male right angle to SMA male cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 6 inch length using PE-SR405FLJ coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08890-6 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W08890-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08890-6 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 6 inch length using PE-SR405FLJ coax. |
| 115 | ||
| PE3W18906 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Right Angle Cable Using LMR-240-DB Coax. PE3W18906 is a SMA male to BNC male right angle cable using LMR-240-DB coax. This Pasternack SMA male to BNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18906 SMA male to BNC male right angle cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08906/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Female to TNC Male Right Angle Cable Using RG316-DS Coax with HeatShrink. PE3W08906/HS is a SMA female to TNC male right angle cable using RG316-DS coax. This Pasternack SMA female to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08906/HS SMA female to TNC male right angle cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE38906 | Pasternack Enterprises | 0 | ||||
| PE3W08906 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Female Cable Using RG316-DS Coax. PE3W08906 is a TNC male right angle to SMA female cable using RG316-DS coax. This Pasternack TNC male right angle to SMA female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08906 TNC male right angle to SMA female cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3C8906 | Pasternack Enterprises | 0 | ||||
| PE3C4890-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4890-6, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4890-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4890-6 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 6 inch length using RG405 coax. |
| 0 | ||
| PE3C4890-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 60 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 60 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 60 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4890-60, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4890-60 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4890-60 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 60 inch length using RG405 coax. |
| 0 | ||
| PE3C5890-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Right Angle Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male right angle low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male to SMA male right angle low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to SMA cable is a male to male coax assembly, PE3C5890-60, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C5890-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5890-60 can also be used in the other direction and will be right angle SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male right angle low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
 TE Connectivity | 828906-2 | TE Connectivity | CVTY PLUG,JPT,CVTY DIA,5.0,BRN Part Number: 828906-2 | Internal Number: 828906-2 | TE Connectivity RoHS : Compliant |
| 11,813 | |
 Vyrian | 38906 | Protektive Pak | 18,386 | |||
| 1989065 | Phoenix Contact | Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,609 | |||
| 1828906 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,816 | |||
| 2908906 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 9,493 | |||
| HEDS-8906 | Broadcom Limited | Optical Code Wheels RoHS : Compliant | 8,764 | |||
| 1789067 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,459 | |||
| 1689064 | Phoenix Contact | Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Socket RoHS : Compliant | 7,013 | |||
| CSD58906F5 | Texas Instruments | 7,008 | ||||
| 1890617 | Phoenix Contact | Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,700 | |||
| 828906-1 | TE Connectivity | Connector Accessory RoHS : Compliant | 5,545 | |||
| CT148906 | Micron Technology, Inc | 4,590 | ||||
| 5962-01-189-0649 | Texas Instruments | NAND Gate, CMOS, PDIP14 RoHS : Not Compliant | 4,019 | |||
| 989-068-130L121 | Norcomp Interconnect Devices | Telecom and Datacom Connector | 771 | |||
| 1798906 | Phoenix Contact | Barrier Strip Terminal Block RoHS : Compliant | 356 | |||
| 1890600000 | Weidmueller & Kg | Strip Terminal Block | 239 | |||
 Win Source Electronics | DRV8906QPWPRQ1 | Texas Instruments | AUTO MULTI-CHANNEL HALF BRIDGER / Half Bridge (6) Driver DC Motors, General Purpose MOSFET (Metal Oxide) 24-HTSSOP RoHS : Compliant |
| 10,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand