| Electronic Components Datasheet Search |
|
8628 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 0862.8105 | Schurter Electronic Components | Button; 11.5mm; green; SMS RoHS : Compliant |
| 1,299 | |
| 0862.8226 | Schurter Electronic Components | Button; round; black RoHS : Compliant |
| 861 | ||
| 0862.8104 | Schurter Electronic Components | Button; 10.75mm; round; blue RoHS : Compliant |
| 754 | ||
| 1786280000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; 30A; PIN: 11; 6.35mm RoHS : Compliant |
| 150 | ||
| 78628-00000010-01 | Honeywell Sensing and Control | Converter: pressure; 69mbar; -40÷121°C; 5000 RoHS : Compliant |
| 52 | ||
| 1-768862-8 | TE Connectivity | Crimping tool: dedicated |
| 10 | ||
| 18628A31 | CML Innovative Technologies | LED lamp; BA9S,T10; green; 72VDC; plastic; -20÷60°C |
| 0 | ||
| 18628131 | CML Innovative Technologies | LED lamp; BA9S,T10; green; 130VDC; plastic; -20÷60°C RoHS : Compliant |
| 0 | ||
| 1862850000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 13.9A RoHS : Compliant |
| 0 | ||
| 18628130 | CML Innovative Technologies | LED lamp; BA9S,T10; red; 130VDC; plastic; -20÷60°C RoHS : Compliant |
| 0 | ||
| 86288 | Delock | RJ45 module; Keystone; RJ45 socket; silver; on cable,push-in |
| 0 | ||
| 1862870000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 13.9A RoHS : Compliant |
| 0 | ||
| 18628A3W3D | CML Innovative Technologies | LED lamp; BA9S,T10; white; 72VDC; plastic; -20÷60°C |
| 0 | ||
| 18628 | ProLinear/PONTECH Inc | Socket: 12-angles; socket spanner; 13mm; 1/2"; long |
| 0 | ||
| 38.62.8.230.0060 | FINDER SpA | Relay: interface; Ucoil: 230VAC; DPDT; 8A/250VAC; 8A/24VDC; 400VA |
| 0 | ||
![]() Verical | 86286-1 | TE Connectivity | Connector Accessories Keying Plug Nylon Natural Carton RoHS : Compliant |
| 77,750 | |
| 86286-1 | TE Connectivity | Connector Accessories Keying Plug Nylon Natural Carton RoHS : Compliant |
| 16,350 | ||
| 86286-1 | TE Connectivity | Connector Accessories Keying Plug Nylon Natural Carton RoHS : Compliant |
| 10,000 | ||
| 862816-000 | TE Connectivity | Cable Markers Pre-Marked Snap On Polyoxymethylene Yellow Strip RoHS : Compliant |
| 8,700 | ||
| 862816-000 | TE Connectivity | Cable Markers Pre-Marked Snap On Polyoxymethylene Yellow Strip RoHS : Compliant |
| 3,300 | ||
| 862816-000 | TE Connectivity | Cable Markers Pre-Marked Snap On Polyoxymethylene Yellow Strip RoHS : Compliant |
| 1,500 | ||
| 862-8533 | WAGO Innovative Connections | 4-Conductor Chassis-mount Terminal Strip, 1 snap-in foot per Pole, N-PE-L1, with ground contact, 3-Pole RoHS : Compliant |
| 450 | ||
| 862-8503 | WAGO Innovative Connections | Conn Terminal Block RCP 3 POS 3mm Cable Mount 32A Bag RoHS : Compliant |
| 50 | ||
| 862863-000 | TE Connectivity | Conn Triaxial F ST Panel Mount RoHS : Not Compliant |
| 49 | ||
![]() Avnet Americas | 0862.8104 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 0862.8104) RoHS : Compliant |
| 11,647 | |
| 0862.8103 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 0862.8103) RoHS : Compliant |
| 3,102 | ||
| 0862.8226 | Schurter Electronic Components | MTG CAP CONNECTOR - Boxed Product (Development Kits) (Alt: 0862.8226) RoHS : Compliant |
| 3,037 | ||
| MXL86280C-ABE-T | MaxLinear Inc | 8-Port Ethernet Switch, 3.14 V to 3.46 V, 277 Pins, FCLBGA - Trays (Alt: MXL86280C-ABE-T) RoHS : Compliant |
| 1,680 | ||
| MXL86281S-ABE-T | MaxLinear Inc | 16-Port Ethernet Switch, 3.14 V to 3.46 V, 277 Pins, FCLBGA - Trays (Alt: MXL86281S-ABE-T) RoHS : Compliant |
| 1,680 | ||
| MXL86282S-ABE-T | MaxLinear Inc | 10-Port Ethernet Switch, 3.14 V to 3.46 V, 277 Pins, FCLBGA - Trays (Alt: MXL86282S-ABE-T) RoHS : Compliant |
| 1,680 | ||
| 0862.8102 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 0862.8102) RoHS : Compliant |
| 400 | ||
| 0862.8106 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 0862.8106) RoHS : Compliant |
| 206 | ||
| 58628-1 | TE Connectivity | - Bag (Alt: 58628-1) RoHS : Not Compliant |
| 10 | ||
| MXL86281S-EVK-1 | MaxLinear Inc | 2.5 GIAGABIT ETHERNET SWITCH WITH 16 PHY - Boxed Product (Development Kits) (Alt: MXL86281S-EVK-1) RoHS : Not Compliant |
| 2 | ||
| 58628-2 | TE Connectivity | - Bulk (Alt: 94B1258) RoHS : Not Compliant |
| 0 | ||
| BFC233862823 | Vishay Intertechnologies | - Bulk (Alt: BFC233862823) RoHS : Compliant |
| 0 | ||
| 58628-2 | TE Connectivity | - Bag (Alt: 58628-2) RoHS : Not Compliant |
| 0 | ||
| MXL86288I-ABE-T | MaxLinear Inc | 8 PORT 2.5G ETHERNET PHY INDUSTRIAL TEMP RANGE IN 12X12MM EXPOSED DIE BGA PACKAGE - Trays (Alt: MXL86288I-ABE-T) RoHS : Not Compliant | 0 | |||
| 10218628-00 | TE Connectivity | EPRB-1-QU33-50P - Bag (Alt: 10218628-00) RoHS : Not Compliant |
| 0 | ||
![]() Arrow Electronics | 86286-1 | TE Connectivity | Connector Accessories Keying Plug Nylon Natural Carton RoHS : Compliant |
| 16,350 | |
| 86286-1 | TE Connectivity | Connector Accessories Keying Plug Nylon Natural Carton RoHS : Compliant |
| 2 | ||
![]() Newark | 8628 0601000 | Belden Inc | Unshielded Multiconductor Cable 7 Conduc; |Belden 8628 0601000 RoHS : Compliant |
| 3,000 | |
| 1862852 | Phoenix Contact | Terminal Block, Pluggable, 2Pos, 16Awg; |Phoenix Contact 1862852 RoHS : Compliant |
| 1,416 | ||
| 86286-1 | TE Connectivity | Keying Plug, Ampmodu 0.1In Receptacle; Accessory Type:Keying Plug; For Use With:Ampmodu Receptacle Assemblies; Product Range:- Rohs Compliant: Yes |Te Connectivity Amp 86286-1 RoHS : Compliant |
| 1,000 | ||
| 1058628-1 | TE Connectivity | Rf Conn, N-Type Jack, 50 Ohm, 18Ghz; |Te Connectivity 1058628-1 RoHS : Compliant |
| 498 | ||
| 1862881 | Phoenix Contact | Terminal Block, Pluggable, 5Pos, 16Awg; |Phoenix Contact 1862881 RoHS : Compliant |
| 231 | ||
| 1862878 | Phoenix Contact | Terminal Block, Pluggable, 4Pos, 16Awg; |Phoenix Contact 1862878 RoHS : Compliant |
| 211 | ||
| 8628 060100 | Belden Inc | Unshld Multicond Cable 7Cond 14Awg 100Ft; |Belden 8628 060100 RoHS : Compliant |
| 200 | ||
| 782013086280 | Wurth Elektronik | Cylindrical Core, 205 Ohm, 9Mm Id; |Würth Elektronik 782013086280 RoHS : Compliant |
| 122 | ||
| 58628-1 | TE Connectivity | Ratchet Crimp Tool, 26-14Awg Contact; |Te Connectivity Amp 58628-1 RoHS : Not Compliant |
| 10 | ||
| 58628-2 | TE Connectivity | Crimp Die, 58628-1 Crimp Tool; |Te Connectivity Amp 58628-2 RoHS : Not Compliant |
| 9 | ||
| 10168628-001HT | Amphenol Communications Solutions | Crimp Tool, Hand, 0.8Mm, 28-30Awg; |Amphenol Communications Solutions 10168628-001HT RoHS : Not Compliant |
| 4 | ||
| 2862822 | Phoenix Contact | Digital Output Terminal, 32 O/P, 24Vdc; |Phoenix Contact 2862822 RoHS : Compliant |
| 3 | ||
| 2862835 | Phoenix Contact | Digital Input Terminal, 32 I/P, 24Vdc; |Phoenix Contact 2862835 RoHS : Compliant |
| 3 | ||
| 58628-2 | TE Connectivity | Crimp Die, 58628-1 Crimp Tool; Crimp Die Applications:Ultra-Fast Faston Straight Receptacles; For Use With:Tyco 58628-1 Pro-Crimper Iii Hand Crimp Tool Assembly; Product Range:Te Connectivity/Amp 586; Crimp Size:26Awg To 14Awg Rohs Compliant: Na RoHS : Not Compliant |
| 2 | ||
| 186286 | Festo | Qsrl-G1/8-6 Push-In L-Fitting, Rotatable; |Festo 186286 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | AD8628WARZ-R7![]() | Analog Devices Inc | Single, Zero drift, RRIO, 5V O RoHS : Compliant |
| 222,527 | |
AD8628ARZ-REEL7![]() | Analog Devices Inc | SINGLE PRECISION RAIL-RAIL CHO RoHS : Compliant |
| 6,487 | ||
AD8628ARTZ-R2![]() | Analog Devices Inc | SINGLE PRECISION RAIL-RAIL CHO RoHS : Compliant |
| 4,645 | ||
AD8628ARZ-REEL![]() | Analog Devices Inc | SINGLE PRECISION RAIL-RAIL CHO RoHS : Compliant |
| 764 | ||
AD8628AUJZ-REEL7![]() | Analog Devices Inc | SINGLE PRECISION RAIL-RAIL CHO RoHS : Compliant |
| 597 | ||
AD8628ARZ![]() | Analog Devices Inc | SINGLE PRECISION RAIL-RAIL CHO RoHS : Compliant |
| 568 | ||
AD8628WAUJZ-R7![]() | Analog Devices Inc | Single, Zero drift, RRIO, 5V O RoHS : Compliant |
| 356 | ||
AD8628WARTZ-R7![]() | Analog Devices Inc | Single, Zero drift, RRIO, 5V O RoHS : Compliant |
| 85 | ||
| QSH6018-86-28-310 | Analog Devices Inc | QMot Stepper Motor, 60mm, 3.10 RoHS : Compliant |
| 5 | ||
| QSH6018-86-28-310-10K | Analog Devices Inc | QMot Stepper Motor, 3.10 Nm, 1 RoHS : Compliant |
| 1 | ||
AD8628ARTZ-REEL7![]() | Analog Devices Inc | SINGLE PRECISION RAIL-RAIL CHO RoHS : Compliant |
| 0 | ||
![]() RS | 86286-1 | TE Connectivity | CONNECTOR ACCESSORY, NATURAL, KEYING PLUG FOR AMPMODU MOD II AND IV SERIES RoHS : Compliant |
| 4,381 | |
| 1862878 (MCVW 1 5/ 4-ST-3 5) | Phoenix Contact | PCB PLUG SCREW 3.5MM 16AWG 160V 8A 4 POSITION COMBICON MCVW SERIES |
| 245 | ||
| 1788628 | RS Pro | UNINSULATED RING TERMINAL, 6.4MM STUD SIZE, 6AWG WIRE SIZE |
| 100 | ||
| 78628-B00000010-01 | Honeywell Sensing and Control | SENSOR, SF PRESSURE PS N/O 5000 SCREW (1PSI), 5000 SERIES RoHS : Compliant |
| 71 | ||
| 2862835 (IB IL 24 DI 32/HD-PAC) | Phoenix Contact | DIGITAL INPUT MODULE, INLINE MODULAR, 32-CHANNEL, 24VDC, SINGLE-WIRE, DIN RAIL |
| 16 | ||
| QSRL-G1/4-6 (186287) | Festo | FITTING, L, ROTARY, PBT, AIR, G1/4 MALE TO 6MM PUSH IN CONN |
| 11 | ||
| 18628A32 | EAO AG | LED, T10 X 25, BA9S, 3X3MM, YELLOW, 72VDC |
| 10 | ||
| 8386280001 | Kluber Lubrication | STAR VARIO MOUNTING KIT -SINGLE UNIT MULTILPE CONFIGURATION HARDWARE & FITTINGS |
| 10 | ||
| 58628-2 | TE Connectivity | TOOL DIE SET,14-26AWG, ULTRA FAST, QUICK CONNECT TERMINALS, PRO CRIMPER III SERIES |
| 9 | ||
| 18628A3W3 | CML Innovative Technologies | LED LAMP T10X25MM BA9S 3X3MM-LED 72VDC WHITE CLEAR |
| 8 | ||
| QSRL-G1/8-6 (186286) | Festo | FITTING, L, ROTARY, PBT, AIR, G1/8 MALE TO 6MM PUSH IN CONN |
| 3 | ||
| 2862822 (IB IL 24 DO 32/HD-PAC) | Phoenix Contact | OUTPUT MODULE, DIGITAL, INLINE MODULAR, 32-CHANNEL, 24VDC, 50MA, SINGLE-WIRE |
| 3 | ||
| 306548 (6281-EV-A20,0FFMSNM85-5-024/DC-08) | Burkert Fluid Control Systems | SOLENOID VALVE, SERVO ASSIST, BRASS,3/4NPT,232PSI,10CV,24VDC, SERIES 6281EV |
| 3 | ||
| 8628 060100 | Belden Inc | MULTICONDUCTOR CABLE, 7C, 14AWG, 19X27, TC, PVC INS, CHROME PVC JKT, EU CE |
| 1 | ||
| CQF16-06ENSEP1 (6068628) | SICK AG | CAPACITIVE PROXIMITY SENSORS, CQF16-06ENSEP1 |
| 1 | ||
![]() Microchip Technology Inc | PM8628C1-F3EI | Microchip Technology Inc | NVMe 3016, FBGA, Projected EOL: 2051-09-13 RoHS : Compliant |
| 32,920 | |
PIC18F8628-I/PT![]() | Microchip Technology Inc | 80 PIN, 160K, GG CORE PIC WITH 128K/96K BYTES ENH FLASH MEMORY, TQFP, Projected EOL: 2036-09-07 RoHS : Compliant |
| 160 | ||
| PM8628B1-F3EI | Microchip Technology Inc | NVMe 3016, FBGA, Projected EOL: 2051-09-30 - Contact for Pricing RoHS : Compliant | 0 | |||
TC2186-2.8VCTTR![]() | Microchip Technology Inc | 150mA LDO with Shutdown & /Error output, TC1186 upgrade, SOT-23, Projected EOL: 2036-05-16 RoHS : Compliant |
| 0 | ||
TC1186-2.8VCT713![]() | Microchip Technology Inc | LDO with Shutdown, SOT-23, Projected EOL: 2036-09-19 RoHS : Compliant |
| 0 | ||
TC2186-2.85VCTTR![]() | Microchip Technology Inc | 150mA LDO with Shutdown & /Error output, TC1186 upgrade, SOT-23, Projected EOL: 2036-05-16 RoHS : Compliant |
| 0 | ||
PIC18F8628T-I/PT![]() | Microchip Technology Inc | 80 PIN,160K, GG Core PIC with 128K/96K bytes Enh Flash Memory, TQFP, Projected EOL: 2036-09-07 RoHS : Compliant |
| 0 | ||
TC1186-2.85VCT713![]() | Microchip Technology Inc | 150mA LDO with Shutdown & /Error output, SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 110-88-628-41-530000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 163 | ||
| MS9486-28 | MS Pins | 128 | ||||
| 210-88-628-41-101000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 28 | |||
| 217-086286 | Acme Industrial Company | 16 | ||||
| 118628-2 | Lee Spring Company | 8 | ||||
| 217-086285 | Acme Industrial Company | 8 | ||||
| MS39086-282 | MS Pins | 6 | ||||
| 217-086284 | Acme Industrial Company | 5 | ||||
| 1862-832-AL | RAF Electronic Hardware | 2 | ||||
![]() Onlinecomponents.com | 93769-8628 | Molex | Modular Conn/Ethernet Conn MXMag GIG 8CORE RJ45 RoHS : Compliant |
| 107 | |
| 8628 | JKL Components Corporation | T-1 1/4 Standard Midget Flange RoHS : Compliant |
| 79 | ||
| P-8628 | Stancor | RoHS : Compliant |
| 9 | ||
| 8628 | Cooper Crouse-Hinds | FDLA2 RoHS : Compliant |
| 0 | ||
| 94011-8628 | Molex | MXMAG INV 8 CORE GIG EXT TEMP RoHS : Compliant |
| 0 | ||
| 56120-8628 | Molex | CRC™ Signal Female Terminal, Lead-Free, Chain, Gold (Au) Plating RoHS : Compliant |
| 0 | ||
| 56121-8628 | Molex | CRC™ Signal Female Terminal, Lead-Free, Chain, Gold (Au) Plating RoHS : Compliant |
| 0 | ||
| 8628-060500 | Belden Inc | MULTI CONDUCTOR, 7 COND, 14AWG STRAND (19X27), PVC INSULATE, CONTROL/INSTRUMENT RoHS : Compliant |
| 0 | ||
| 8628-060100 | Belden Inc | MULTI CONDUCTOR, 7 COND, 14AWG STRAND (19X27), PVC INSULATE, CONTROL/INSTRUMENT RoHS : Compliant |
| 0 | ||
| 8628-0601000 | Belden Inc | Multi-Conductor Cable 7Conductors 14AWG 15.82mm 600VAC Chrome 304.8m Reel RoHS : Compliant |
| 0 | ||
| 317-8628-000 | ITT Interconnect Solutions | Spare Tip For CET-F80-20 RoHS : Compliant |
| 0 | ||
| 8628-CHR-100 | Belden Inc | MULTI CONDUCTOR, 7 COND, 14AWG STRAND (19X27), PVC INSULATE, CONTROL/INSTRUMENT RoHS : Compliant |
| 0 | ||
| 8628-CHR-500 | Belden Inc | MULTI CONDUCTOR, 7 COND, 14AWG STRAND (19X27), PVC INSULATE, CONTROL/INSTRUMENT RoHS : Compliant |
| 0 | ||
| 8628-CHR-1000 | Belden Inc | Multi-Conductor Cable 7Conductors 14AWG 15.82mm 600VAC Chrome 304.8m Reel RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD8628AUJ-REEL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant |
| 1,510 | |
AD8628ARZ-REEL![]() | Analog Devices Inc | Op Amp Zero Drift/Chopper 2.5MHz 8-SOIC T/R RoHS : Compliant |
| 7,549 | ||
AD8628AR![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant |
| 10 | ||
AD8628WARZ-R7![]() | Analog Devices Inc | Op Amp Zero Drift/Chopper 2.5MHz 8-SOIC T/R RoHS : Compliant |
| 18,304 | ||
AD8628WARZ-RL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Compliant |
| 22 | ||
AD8628WAUJZ-R7![]() | Analog Devices Inc | Op Amp Zero Drift/Chopper 2.5MHz SOT-23-5 T/R RoHS : Compliant |
| 61 | ||
AD8628ARZ![]() | Analog Devices Inc | Op Amp Zero Drift/Chopper 2.5MHz 8-SOIC Tube RoHS : Compliant |
| 34 | ||
AD8628ARZ-REEL7![]() | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 30Mbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 1,842 | ||
TPS78628DCQR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 2.8V 1.5A SOT-223-6 T/R RoHS : Compliant |
| 25,000 | ||
TPS78628KTTR![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PSSO5 RoHS : Compliant |
| 7,000 | ||
TPS78628KTTT![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 2.8V 1.5A TO-263-6 Tube RoHS : Compliant |
| 13,700 | ||
TPS78628DCQ![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PDSO6 ' RoHS : Compliant |
| 4,952 | ||
| MR80C86-2/883 | Harris Semiconductor | IC MPU 80C86 16Bit 1 Core 8MHz 44-LCC RoHS : Not Compliant |
| 121 | ||
![]() Sager | 8628 | Keystone Electronics Corp | Circuit Board Hardware - PCB BOARD GUIDE | 0 | ||
| 0862.8226 | Schurter Electronic Components | Switch Bezels / Switch Caps MTG CAP CONNECTOR RoHS : Compliant |
| 0 | ||
| 862800-4 | TE Connectivity | Crimpers / Crimping Tools 7 PIN PLUG&CABLE ASY | 0 | |||
| 9862802086 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862803058 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862804075 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862809106 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862809151 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862815136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862816108 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862816153 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862817125 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862818016 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862818061 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9862818142 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Ameya Holding Limited | AD8628ARTZ | Analog Devices Inc | 77 | |||
![]() ComSIT USA | AD8628ARZ![]() | Analog Devices Inc | Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 132 | ||
| AD8628ARZREEL7 | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 110 | |||
| 117186281 | TE Connectivity | SOCKET HOUSING Combination Line Connector, Female RoHS : Not Compliant | 13 | |||
![]() Interstate Connecting Components | 88-628757-35H | Amphenol Aerospace | 38999 S3 BX MNT RCP KIT W/PCB CONTACTS |
| 6 | |
| M24308/6-285P | Amphenol Positronic | D-SUB RECP 50 #20 SKT CRIMP |
| 6 | ||
| 58628-2 | TE Connectivity | PROCRMP DIESET 26-14 ULTRAFAST |
| 1 | ||
| 88-628759-35P | Amphenol Aerospace | 38999 S3 BX MNT RCP CONN KIT | 0 | |||
| 75-068628-15S | Amphenol Industrial Operations | 0 | ||||
| 10218628-00 | TE Connectivity | EPRB-1-QU33-50P RoHS : Compliant | 0 | |||
| 88-628719-35R | Amphenol Aerospace | 0 | ||||
| M24308/6-288F | Amphenol Positronic | D-SUB RECP 44 #22D SKT CRIMP |
| 0 | ||
| M24308/6-288F | Amphenol PCD | M2000/6-288F | 0 | |||
| 88-628759-35G | Amphenol Aerospace | 38999 S3 BX MNT RCP CONN KIT | 0 | |||
| 018628142G0 | ITT Interconnect Solutions | 47821-03T240 | 0 | |||
| 88-628719-61S | Amphenol Aerospace | 0 | ||||
| RJE591886286N | Amphenol Commercial | 8P8C, THR, RA, CAT6, SHIELD, S | 0 | |||
| 8628GE228PT002 | SOURIAU-SUNBANK | J6722 | 0 | |||
| 88-628006-11P | Amphenol Aerospace | 0 | ||||
![]() NexGen Digital | AD8628AUJZ-REEL![]() | Analog Devices Inc | RoHS : Compliant | 6,971 | ||
![]() PEI Genesis | 88-628748-55P | Amphenol Corporation |
| 0 | ||
| 88-628759-35P | Amphenol Corporation |
| 0 | |||
| 75-068628-15S | Amphenol Corporation |
| 0 | |||
| 85-068628-12S | Amphenol Corporation |
| 0 | |||
| M24308/6-288F | Amphenol Positronic |
| 0 | |||
| 85-068628-15S | Amphenol Corporation |
| 0 | |||
| 88-628749-35H | Amphenol Corporation |
| 0 | |||
| 88-628757-35P | Amphenol Corporation |
| 0 | |||
| M24308/6-285P | Amphenol Positronic |
| 0 | |||
| J586-28 | SOURIAU-SUNBANK |
| 0 | |||
| 88-628745-35N | Amphenol Corporation |
| 0 | |||
| 88-628004-05P | Amphenol Corporation |
| 0 | |||
| 88-628745-35L | Amphenol Corporation |
| 0 | |||
| 430-8628-000 | ITT Interconnect Solutions |
| 0 | |||
| 88-628751-35S | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 862816-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 3,168 | |
| 1-1586862-8 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,035 | ||
| 85-068628-21G | Amphenol Corporation | ER 37C 37#16 PIN PLUG |
| 72 | ||
| 75-068628-21K | Amphenol Corporation | CONNECTOR |
| 72 | ||
| 78628-00000010-01 | Honeywell Sensing and Control | Switch RoHS : Compliant |
| 34 | ||
| 58628-1 | TE Connectivity | SDE COAX/Profile Dies |
| 24 | ||
| M24308/6-284P | Amphenol Positronic | Military D-Sub Connector |
| 20 | ||
| 78628-00000010-05 | Honeywell Sensing and Control | Switch |
| 18 | ||
| 88-628745-26S | Amphenol RF | RF Connector |
| 15 | ||
| M24308/6-288P | Amphenol Positronic | Military D-Sub Connector |
| 14 | ||
| M24308/6-282P | Amphenol Positronic | Military D-Sub Connector |
| 11 | ||
| 2098628-1 | TE Connectivity | Connectors RoHS : Compliant |
| 4 | ||
| 86-288578-08S | Amphenol Corporation | CONNECTOR |
| 3 | ||
| 8628000 | Hartmann Electronic | AERO RELAY/CONTACTOR 8628000 |
| 2 | ||
| EF8628-000 | TE Connectivity | backshells, RoHS : Compliant |
| 2 | ||
![]() PUI | 12.88628 | 9,864 | ||||
![]() Richardson RFPD | AD8628ARTZ-REEL7![]() | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V 5 RoHS : Compliant |
| 1,000 | |
| SI51214-B08628-GMR | Skyworks Solutions Inc | Clock Generator 3MHz to 165MHz-IN 133MHz-OUT 6-Pin RoHS : Compliant | 0 | |||
AD8628ARTZ-R2![]() | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V 5 RoHS : Compliant |
| 0 | ||
AD8628ARZ![]() | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V 8 RoHS : Compliant |
| 0 | ||
AD8628WARTZ-RL![]() | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V A RoHS : Compliant | 0 | |||
| 1058628-1 | TE Connectivity | Conn Type N 0Hz to 18GHz 50Ohm Clamp/Solder ST Pan RoHS : Compliant |
| 0 | ||
| SI51214-B08628-GM | Skyworks Solutions Inc | Clock Generator 3MHz to 165MHz-IN 133MHz-OUT 6-Pin RoHS : Compliant | 0 | |||
AD8628WARTZ-R7![]() | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V A RoHS : Compliant | 0 | |||
![]() Rutronik | 0862.8104 | Schurter Electronic Components | MTG 12.7/PMS VKA 10,6 blue RoHS : Compliant |
| 16,800 | |
| 0862.8108 | Schurter Electronic Components | Cap for SMS series,13,8mm white RoHS : Compliant |
| 100 | ||
![]() Chip 1 Exchange | 160862-8 | TE Connectivity | INSTOCK RoHS : Compliant | 214,500 | ||
| 504186-2801 | Molex | INSTOCK RoHS : Compliant | 74,100 | |||
| 86286-1 | TE Connectivity | INSTOCK RoHS : Compliant | 65,000 | |||
| 12.88628 | Geyer Electronic E K | INSTOCK | 9,864 | |||
AD8628ARTZ-REEL7![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 4,664 | |||
AD8628ARTZ-REEL7![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 3,000 | |||
| 1-1718628-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,689 | |||
| 2098628-1 | TE Connectivity | INSTOCK RoHS : Compliant | 310 | |||
| AD8628ARTZ-2R | Analog Devices Inc | INSTOCK | 142 | |||
AD8628ARTZ-R2![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 17 | |||
![]() Avnet Abacus | 1862852 | Phoenix Contact | Pluggable Terminal Block 35 mm 2 Ways 28 AWG 16 AWG 15 mm Screw (Alt: 1862852) RoHS : Compliant | 250 | ||
| 1862878 | Phoenix Contact | Pluggable Terminal Block 35 mm 4 Ways 28 AWG 16 AWG 15 mm Screw (Alt: 1862878) RoHS : Compliant | 250 | |||
| 58628-2 | TE Connectivity | Specialty Hand Tools Easier On The Hand And Precise On The Crimp (Alt: 58628-2) RoHS : Not Compliant | 0 | |||
| 58628-2 | TE Connectivity | Specialty Hand Tools Easier On The Hand And Precise On The Crimp (Alt: 58628-2) RoHS : Not Compliant | 0 | |||
| 22286283 | Molex | Conn Unshrouded Header HDR 28 POS 254mm Solder RA ThruHole Bag (Alt: 22286283) RoHS : Compliant | 0 | |||
| 0862.8226 | Schurter Electronic Components | MTG CAP CONNECTOR (Alt: 0862.8226) RoHS : Compliant | 0 | |||
| 638628000 | Molex | (Alt: 638628000) RoHS : Compliant | 0 | |||
| 2098628-1 | TE Connectivity | (Alt: 2098628-1) RoHS : Compliant | 0 | |||
| 0862.8101 | Schurter Electronic Components | MTG 127PMS VKA 835 YELLOW (Alt: 0862.8101) RoHS : Compliant | 0 | |||
| 1862870000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1862870000) RoHS : Compliant | 0 | |||
| 1886280000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block SKT 2 POS 508mm Screw ST Panel Mount 10A (Alt: 1886280000) RoHS : Compliant | 0 | |||
| 1862800000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1862800000) RoHS : Compliant | 0 | |||
| 286287-000 | TE Connectivity | (Alt: 286287-000) RoHS : Compliant | 0 | |||
| 1862840000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1862840000) RoHS : Compliant | 0 | |||
| 86285-006LF | Amphenol Corporation | Conn Modular Jack F 6 POS 203mm Solder RA ThruHole 6 Terminal 1 Port Tray Cat 3 (Alt: 86285-006LF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0862.8226 | Schurter Electronic Components | MTG CAP CONNECTOR (Alt: 0862.8226) RoHS : Compliant | 0 | ||
| 2548628-1 | TE Connectivity | (Alt: 2548628-1) RoHS : Compliant | 0 | |||
| MXL86282I-ABE-T | MaxLinear Inc | (Alt: MXL86282I-ABE-T) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MD80C86-2/883 | Renesas Electronics Corporation | (Alt: MD80C86-2/883) RoHS : Not Compliant | 0 | ||
| MXL86288I-ABE-T | MaxLinear Inc | 8Port Gigabit Ethernet PHY 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86288I-ABE-T) RoHS : Compliant | 0 | |||
PIC18F8628-I/PT![]() | Microchip Technology Inc | MCU 8bit PIC18 PIC RISC 96KB Flash 5V 80Pin TQFP Tray (Alt: PIC18F8628-I/PT) RoHS : Compliant | 0 | |||
| MXL86282C-ABE-T | MaxLinear Inc | (Alt: MXL86282C-ABE-T) RoHS : Compliant | 0 | |||
TC2186-2.8VCTTR![]() | Microchip Technology Inc | (Alt: TC2186-2.8VCTTR) RoHS : Compliant | 0 | |||
| MXL86282I-ABE-T | MaxLinear Inc | 10Port Ethernet Switch 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86282I-ABE-T) RoHS : Compliant | 0 | |||
| MXL86288L-EVK-1 | MaxLinear Inc | 8Port 25 Gigabit Ethernet PHY Evaluation Board (Alt: MXL86288L-EVK-1) RoHS : Compliant | 0 | |||
| MXL86289C-EVK-1 | MaxLinear Inc | 8PORT 25 GIGABIT ETHERNET PHY (Alt: MXL86289C-EVK-1) RoHS : Compliant | 0 | |||
| MXL86281S-EVK-1 | MaxLinear Inc | 25 GIAGABIT ETHERNET SWITCH WITH 16 PHY (Alt: MXL86281S-EVK-1) RoHS : Compliant | 0 | |||
| MXL86282S-ABE-R | MaxLinear Inc | 10Port Ethernet Switch 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86282S-ABE-R) RoHS : Compliant | 0 | |||
| MXL86288L-ABB-T | MaxLinear Inc | 8Port Gigabit Ethernet PHY 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86288L-ABB-T) RoHS : Compliant | 0 | |||
| MXL86281S-ABE-T | MaxLinear Inc | (Alt: MXL86281S-ABE-T) RoHS : Compliant | 0 | |||
| MXL86281S-ABE-R | MaxLinear Inc | 16Port Ethernet Switch 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86281S-ABE-R) RoHS : Compliant | 0 | |||
TC1186-2.8VCT713![]() | Microchip Technology Inc | (Alt: TC1186-2.8VCT713) RoHS : Compliant | 0 | |||
TC1186-2.85VCT713![]() | Microchip Technology Inc | (Alt: TC1186-2.85VCT713) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | PE-68628 | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 16 | |
AD8628ARTZ-REEL7![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
AD8628ARZ-REEL7![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
![]() DB Roberts | 3BT-P8628-00 | Acumnet / Camcar | DELTA-PT 20-0.78 X 3 TXP | 0 | ||
| 498628 | Essentra Components | 0 | ||||
| 1862-832-AL | RAF Electronic Hardware | RD FEM STANDOFF NO PLATE 3/8 Rd X 6.00 Length | 0 | |||
| H8628 | Heyco | 0 | ||||
| H8628F | Heyco | HPASC 2 NPT-90-54MM V-0 BLK | 0 | |||
![]() EBV Elektronik | PIC18F8628-I/PT![]() | Microchip Technology Inc | MCU 8bit PIC18 PIC RISC 96KB Flash 5V 80Pin TQFP Tray (Alt: PIC18F8628-I/PT) RoHS : Compliant | 0 | ||
| BCM68628B0IFSBG | Broadcom Limited | 2 x NGPON22xXGSPON (Alt: BCM68628B0IFSBG) RoHS : Compliant | 0 | |||
PIC18F8628T-I/PT![]() | Microchip Technology Inc | MCU 8bit PIC18 PIC RISC 96KB Flash 5V 80Pin TQFP TR (Alt: PIC18F8628T-I/PT) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M24308/6-284P | Amphenol Positronic | Rectangular Con |
| 25 | |
| 88-628748-35P | Amphenol Aerospace | Connector MIL M | 2 | |||
| MS27786-28 | Safran Electrical & Power UK | Switches | 0 | |||
| 78628-B00000010-05 | Honeywell Sensing and Control | Switches | 0 | |||
| 78628-00000007-05 | Honeywell Sensing and Control | Switches | 0 | |||
| 78628-B00000010-01 | Honeywell Sensing and Control | Switches RoHS : Compliant | 0 | |||
![]() Maritex | AD8628ARZ-REEL7![]() | Analog Devices Inc | Operational Amplifiers; AD8628ARZ-REEL7; ANALOG DEVICES; 5 �V; 1; 1.1 mA; 140 dB RoHS : Compliant |
| 1,731 | |
![]() Master Electronics | 8628 | JKL Components Corporation | T-1 1/4 Standard Midget Flange RoHS : Compliant |
| 79 | |
| CNTCA6628628746SKTASSYKNG2 | ITT Interconnect Solutions | Cnt CA66286&287-46 Skt Assy *KNG2*; Mil-dtl 5015 F RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-086-281 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 07630862850 | 3M Interconnect | Conn Ejector Header HDR 60 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 0 | ||
| 10218628-00 | TE Connectivity | EPRB-1-QU33-50P RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-086-280 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-086-282 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-086-285 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-086-280 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 78628-00000010-01 | Honeywell Sensing and Control | Pressure Switches-Trans Pressure Switch |Honeywell 78628-00000010-01 RoHS : Compliant |
| 0 | ||
| 986282-1 | TE Connectivity | BUSHING TAPER BORE RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-086-288 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1625862-8 | TE Connectivity | RH73 2B 10G 10% 1000PPM 1K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 018628142A8 | ITT Interconnect Solutions | 47821-03T108 RoHS : Compliant |
| 0 | ||
PIC18F8628-I/PT![]() | Microchip Technology Inc | PIC18 with 96KB Flash 4KB RAM 1024 DataEE 12-bit ADC RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W18628/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable 24 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable 24 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS-24 can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS-24 can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | |
| PE38628-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 36 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE38628-36, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE38628-36 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-C240 coax. |
| 0 | ||
| PE3W18628 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to SMA Male Right Angle Cable Using LMR-240 Coax. PE3W18628 is a reverse polarity TNC male to SMA male right angle cable using LMR-240 coax. This Pasternack reverse polarity TNC male to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18628 TNC reverse polarity male to SMA male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE38628-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA male cable 24 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 24 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE38628-24, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE38628-24 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 24 inch length using PE-C240 coax. |
| 0 | ||
| PE3W18628/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable 12 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable 12 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS-12 can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS-12 can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18628/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS-36 can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS-36 can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W08628 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMA Male Cable Using RG402 Coax. PE3W08628 is a BMA jack 2 hole flange to SMA male cable using RG402 coax. This Pasternack BMA jack 2 hole flange to SMA male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA 2 hole flange to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08628 BMA jack 2 hole flange to SMA male cable assembly is constructed with RG402 coax. | 0 | |||
| PE38628-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA male cable 60 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 60 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE38628-60, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE38628-60 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 60 inch length using PE-C240 coax. |
| 0 | ||
| PE38628/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-C240 Coax with HeatShrink. PE38628/HS is a SMA male to SMA male cable using PE-C240 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38628/HS SMA male to SMA male cable assembly is constructed with PE-C240 coax. | 0 | |||
| PE38628-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA male cable 12 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 12 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE38628-12, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE38628-12 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 12 inch length using PE-C240 coax. |
| 0 | ||
| PE38628-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA male cable 48 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 48 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE38628-48, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE38628-48 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using PE-C240 coax. |
| 0 | ||
| PE3W18628/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS-60 can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS-60 can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18628/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS-48 can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS-48 can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18628/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE38628LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-C240 Coax, LF Solder. PE38628LF is a SMA male to SMA male cable using PE-C240 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38628LF SMA male to SMA male cable assembly is constructed with PE-C240 coax. | 0 | |||
![]() TE Connectivity | 1586862-8 | TE Connectivity | 8P FH PLUG VAL-U-LOK FH GW Number of Positions: 8 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 8 Plug Housing Crimp | Part Number: 1586862-8 | Internal Number: 1586862-8 | TE Connectivity RoHS : Compliant |
| 5,500 | |
| 1658628-2 | TE Connectivity | PRESS FIT 2X1 REDUCED PROFILE Pluggable Form Factor: SFP Pluggable I/O Product Type: Cage Assembly with Integrated Connector Centerline (Pitch): .8 mm Centerline (Pitch): .03 in Sealable: No SFP Cage Assembly with Integrated Connector .8 mm .03" | High Speed I/o | Part Number: 1658628-2 | Internal Number: 1658628-2 | TE Connectivity RoHS : Compliant |
| 72 | ||
| 58628-1 | TE Connectivity | PROCRIMP T&D 26-14 ULTRAFAST Tool Grade: Commercial Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) UL/CSA TE Certification: Upon Request for Fee Power Technology Type: Electric Battery Manual Commercial Crimp Tooling Removable/Interchangeable Upon Request for Fee | Hand Crimping Tool | Part Number: 58628-1 | Internal Number: 58628-1 | TE Connectivity RoHS : Compliant |
| 15 | ||
![]() Vyrian | AD8628ARZ-REEL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 12,278 | ||
AD8628AUJ-REEL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 9,892 | |||
AD8628AR-REEL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 9,889 | |||
AD8628ARTZ-REEL7![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 9,102 | |||
TPS78628KTTTG3![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PSSO5 RoHS : Compliant | 8,897 | |||
V62/08628-02XE![]() | Texas Instruments | ADC, Proprietary Method, 14-Bit, 1 Func, 4 Channel, Serial Access, CMOS, PQCC64 RoHS : Compliant | 7,832 | |||
AD8628ARTZ-R2![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 7,342 | |||
AD8628AR![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 7,211 | |||
TPS78628KTT![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PSSO5 RoHS : Not Compliant | 7,163 | |||
TPS78628KTTRG3![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PSSO5 RoHS : Compliant | 6,837 | |||
V62/08628-01XE![]() | Texas Instruments | ADC, Proprietary Method, 14-Bit, 1 Func, 4 Channel, Serial Access, CMOS, PQCC64 RoHS : Compliant | 5,581 | |||
PIC18F8628-I/PT![]() | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC18 CPU, 40MHz, CMOS, PQFP80 RoHS : Compliant | 5,410 | |||
TPS78628DCQG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PDSO6 RoHS : Compliant | 5,070 | |||
| BCM68628B0IFSBG | Broadcom Limited | 4,443 | ||||
| M24308/6-285P | ITT Interconnect Solutions | D Subminiature Connector, 50 Contact(s), Female, Crimp Terminal, Receptacle | 635 | |||
![]() Waytek, Inc. | 148628-91 | General Cable Technologies Corporation | 10GA SXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 3,750 | |
![]() Win Source Electronics | AD8628ARTZ | Analog Devices Inc | IC OPAMP ZRO-DRFT 2.5MHZ SOT23-5 |
| 15,000 | |
AD8628ARZ![]() | Analog Devices Inc | IC OPAMP ZERO-DRIFT 2.5MHZ 8SOIC RoHS : Compliant |
| 15,000 | ||
AD8628ARTZ-R2![]() | Analog Devices Inc | Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier RoHS : Compliant |
| 14,040 | ||
| AD8628ARTZRL7 | ADI Electronics Inc |
| 13,910 | |||
AD8628ARTZ-REEL7![]() | Analog Devices Inc | IC OPAMP ZRO-DRFT 2.5MHZ SOT23-5 / Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V 5-Pin SOT-23 T/R RoHS : Compliant |
| 13,710 | ||
AD8628ARZ-REEL![]() | Analog Devices Inc | IC OPAMP ZERO-DRIFT 2.5MHZ 8SOIC RoHS : Compliant |
| 13,700 | ||
| AD8628ARTZ-REEL | Analog Devices Inc |
| 13,540 | |||
AD8628WAUJZ-R7![]() | Analog Devices Inc | IC OPAMP ZERO-DRIFT TSOT23-5 RoHS : Compliant |
| 10,930 | ||
AD8628ART![]() | Analog Devices Inc | Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier RoHS : Not Compliant |
| 10,000 | ||
AD8628AR![]() | Analog Devices Inc | IC OPAMP CHOPPER R-R 30MA 8SOIC RoHS : Not Compliant |
| 9,900 | ||
AD8628ART-REEL7![]() | Analog Devices Inc | Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier / Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V Automotive 5-Pin SOT-23 T/R RoHS : Not Compliant |
| 9,430 | ||
| AD8628ARTRL7 | ADI Electronics Inc |
| 9,130 | |||
AD8628AR-REEL7![]() | Analog Devices Inc | Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier / Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V Automotive 8-Pin SOIC N T/R RoHS : Not Compliant |
| 8,930 | ||
| AD8628AUJZ | Analog Devices Inc | IC OPAMP ZERO-DRIFT TSOT23-5 |
| 7,765 | ||
AD8628AUJZ-REEL7![]() | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R I/O ±2.5V/5V 5-Pin TSOT T/R / IC OPAMP ZERO-DRIFT TSOT23-5 RoHS : Compliant |
| 7,765 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |