| Electronic Components Datasheet Search |
|
8615 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | AD8615AUJZ-REEL7![]() | Analog Devices Inc | IC: operational amplifier; 24MHz; Ch: 1; ±1.35÷2.75VDC,2.7÷5.5VDC RoHS : Compliant |
| 3,000 | |
| 186150 | Festo | Push-in fitting; threaded,angled 90°; -0.95÷6bar; Thread: G 1/8" RoHS : Compliant |
| 4 | ||
| 61-8615.11 | EAO AG | Contact block; 61; connectors; Contacts: NO; 250VAC; 5A; -25÷55°C |
| 3 | ||
| 09086150 | GSR | Tap: inch; UNF 3/8"; right hand thread; 24; L: 100mm; 8mm; 2B; Silver |
| 0 | ||
| 1886150000 | Weidmüller Interface GmbH & Co. KG | Connector: terminal block; power supply; OMNIMATE; 17.5A; 800V RoHS : Compliant |
| 0 | ||
| 1861522 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
| 78615/3C | Murata Manufacturing Co Ltd | Transformer: impulse; THT; 9.52x9x6.35mm; 200uH; 0÷70°C; Trans: 1: 1 RoHS : Compliant |
| 0 | ||
| 09186150 | GSR | Tap: inch; UNF 3/8"; right hand thread; 24; L: 100mm; 8mm; 2B; Silver |
| 0 | ||
| 78615/16C | Murata Manufacturing Co Ltd | Transformer: impulse; THT; 9.52x9x6.35mm; 4mH; 0÷70°C; Trans: 1: 1 RoHS : Compliant |
| 0 | ||
| 861502313 | AUER Signal GmbH | Signaller: lighting; continuous light,blinking light; red; PCL |
| 0 | ||
| 1786158 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON M RoHS : Compliant |
| 0 | ||
| 1861519 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
| 1861564 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
| MAT9861514 10M | igus Inc | Cable: servo drive; 10m; Standard: Siemens; chainflex; harnessed |
| 0 | ||
| MAT9861536 3M | igus Inc | Cable: servo drive; 3m; Standard: Siemens; chainflex; harnessed |
| 0 | ||
![]() Verical | 861502 | Molex | Conn Shrouded Header (2 Sides) HDR 2 POS 5.08mm Solder ST Thru-Hole Eurostyle RoHS : Compliant |
| 100 | |
| 8615690000 | Weidmüller Interface GmbH & Co. KG | Interface Converter |
| 28 | ||
![]() Avnet Americas | 5650861-5 | TE Connectivity | - Trays (Alt: 5650861-5) RoHS : Compliant |
| 19,321 | |
| 78615/9JC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78615/9JC) RoHS : Compliant |
| 100 | ||
| 1658615-3 | TE Connectivity | D Sub Connector, DB15, Standard, Plug, AMPLIMITE HDF, 15 Contacts, DA, IDC / IDT - Rail/Tube (Alt: 1658615-3) RoHS : Compliant |
| 12 | ||
| BFC237086153 | Vishay Intertechnologies | General Purpose Film Capacitor, Metallized PET, Radial Box - 2 Pin, 0.015 uF, ? 5%, 63 V, 100 V - Product that comes on tape, but is not reeled (Alt: 84AC4110) RoHS : Compliant |
| 0 | ||
| RJE721886152 | Amphenol Corporation | 8P8C, RA, CAT5E, SHIELD, RECESSED PROFILE, WITH LEDS - Trays (Alt: RJE721886152) RoHS : Not Compliant | 0 | |||
| Y078615K0000T0L | VPG Foil Resistors | High Precision Resistor Metal Foil 15kOhm 0.01% Bulk - Bulk (Alt: Y078615K0000T0L) RoHS : Not Compliant |
| 0 | ||
| 786155-7 | TE Connectivity | - Rail/Tube (Alt: 786155-7) RoHS : Not Compliant |
| 0 | ||
| 78615/9JC-R | Murata Manufacturing Co Ltd | Pulse Transformer, 1CT:1CT, 10 mH, 1.45 ohm, 56 V?s, 1 kV, 786J Series - Tape and Reel (Alt: 78615/9JC-R) RoHS : Compliant |
| 0 | ||
| RJE581886156N | Amphenol Corporation | 8P8C, THR, RA, CAT5E, SHIELD, STANDARD PROFILE, WITH LEDS - Tape and Reel (Alt: RJE581886156N) RoHS : Not Compliant | 0 | |||
| 8615690000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 8615690000) RoHS : Compliant | 0 | |||
| 78615/16MC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78615/16MC) RoHS : Compliant |
| 0 | ||
| M24308/6-15F | ITT Interconnect Solutions | - Bulk (Alt: M24308/6-15F) RoHS : Not Compliant | 0 | |||
| M24308/6-15F | Amphenol Corporation | - Bulk (Alt: M24308/6-15F) RoHS : Not Compliant |
| 0 | ||
| FW-11-05-L-D-486-152-A-P-TR | Samtec Inc | Board Stackers & Spacers, Pin Header, 12.34 mm, 22 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Tape and Reel (Alt: FW-11-05-L-D-486-152-A-P-TR) RoHS : Compliant |
| 0 | ||
| MKP1848615924Y4 | Vishay Intertechnologies | MKP 1848 15?F ?5% 1200V= - Bulk (Alt: MKP1848615924Y4) RoHS : Compliant |
| 0 | ||
![]() Newark | BFC237086153 | Vishay Intertechnologies | Cap, 0.015Uf, 100V, Film, Radial; Dielec |Vishay BFC237086153 RoHS : Compliant |
| 249 | |
| BFC237086153 | Vishay Intertechnologies | Cap, 0.015Uf, 100V, Film, Radial; Dielec |Vishay BFC237086153 RoHS : Compliant |
| 249 | ||
| 178.6152.0001 | Littelfuse Inc | Blade Fuse Holder, 1Pos, 30A, 80V; Fuse Holder Type:Automotive Blade Fuse Holder; Fuse Current:30A; Fuse Size Held:Ato; Holder Terminals:Crimp; No. Of Fuses:1Fuses; Product Range:Ato Fkh Series; Voltage Rating Vac:80V Rohs Compliant: Yes RoHS : Compliant |
| 202 | ||
| 78615/9JC-R | Murata Power Solutions | Pulse Transformer, 10Mh, 1Ct:1Ct; |Murata Power Solutions 78615/9JC-R RoHS : Compliant |
| 99 | ||
| 78615/9JC-R | Murata Power Solutions | Pulse Transformer, 10Mh, 1Ct:1Ct; |Murata Power Solutions 78615/9JC-R RoHS : Compliant |
| 99 | ||
| 1861522 | Phoenix Contact | Terminal Block, Pluggable, 8Pos, 12Awg; Available Until Stocks Are Exhausted |Phoenix Contact 1861522 RoHS : Compliant |
| 40 | ||
| FMCA1861-50CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1861-50CM RoHS : Not Compliant |
| 32 | ||
| FMCA1886-150CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1886-150CM RoHS : Not Compliant |
| 6 | ||
| 861504313 | AUER Signal GmbH | Beacon, Clear, Flashing/Steady, 240Vac; |Auer Signal 861504313 RoHS : Compliant |
| 5 | ||
| 21.15.8615 | Rotronic-Secomp AG | Fo Jumper Cable, Lc-Lc Duplex, Om4, 10M; |Roline 21.15.8615 RoHS : Not Compliant |
| 3 | ||
| 176861512 | Wurth Elektronik | Dc-Dc Converter, 15V, 0.2A; |Würth Elektronik 176861512 RoHS : Compliant |
| 2 | ||
| 176861512 | Wurth Elektronik | Dc-Dc Converter, 15V, 0.2A; |Würth Elektronik 176861512 RoHS : Compliant |
| 2 | ||
| FMCA2861-50CM | Fairview Microwave Inc | Sma Male-Ra Sma Male Cbl Tinned Alu; |Fairview Microwave FMCA2861-50CM RoHS : Not Compliant |
| 2 | ||
| BU-4150086150 | Mueller Electric Company | Rf Cable, U.fl R/A Plug-Plug, 150Mm; |Mueller Electric BU-4150086150 RoHS : Compliant |
| 2 | ||
| 2861580 | Phoenix Contact | Bus Coupler, 1.25A, 500Kbps, 3W; |Phoenix Contact 2861580 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | MAX86150EFF+T | Analog Devices Inc | 3rd Gen High-Accuracy Pulse Ox RoHS : Compliant | 60,000 | ||
| LT8615RUDM#WTRPBF | Analog Devices Inc | 42V 3.5A Buck Regulator RoHS : Compliant |
| 12,500 | ||
AD8615AUJZ-REEL7![]() | Analog Devices Inc | SINGLE PRECISION CMOS R-R OP A RoHS : Compliant |
| 4,716 | ||
| ADM8615Y100ACBZ-R7 | Analog Devices Inc | IC,LV Monitr,Reset,Watchdog UL RoHS : Compliant |
| 3,005 | ||
| ADM8615Z050ACBZ-R7 | Analog Devices Inc | IC,LV Monitr,Reset,Watchdog UL RoHS : Compliant |
| 1,548 | ||
| LT8615RUDM#PBF | Analog Devices Inc | 42V 3.5A Buck Regulator RoHS : Compliant |
| 987 | ||
| LT8615RUDM#WPBF | Analog Devices Inc | 42V 3.5A Buck Regulator RoHS : Compliant |
| 980 | ||
| MAX86150EVSYS# | Analog Devices Inc | EVKIT for 3rd Gen High-Accurac |
| 66 | ||
AD8615AUJZ-R2![]() | Analog Devices Inc | SINGLE PRECISION CMOS R/R OP A RoHS : Compliant |
| 16 | ||
| ADM8615-EVALZ | Analog Devices Inc | Eval Brd LV Monitr,Reset,Wtchd RoHS : Compliant |
| 11 | ||
| LT8615RUDM#TRPBF | Analog Devices Inc | 42V 3.5A Buck Regulator RoHS : Compliant |
| 0 | ||
| EVAL-LT8615-AZ | Analog Devices Inc | LT8615 Evaluation Board RoHS : Compliant |
| 0 | ||
![]() RS | QSML-1/8-6 (153336) | Festo | PUSH TO CONNECT L FITTING, R1/8 TO 6MM TUBE, PBT PLASTIC, QSM SERIES |
| 63 | |
| QST-8-6 (153135) | Festo | PUSH-IN T CONNECTOR, 1 PORT 6MM & 2 PORTS 8MM OD TUBE, BLUE RING |
| 41 | ||
| 5500.2231 (FMEC-0186-1514) | Schurter Electronic Components | DC LINE FILTER 1-PHS 1-STG 2-P 15A +/-80VDC 3X0.1 L(MH) 86-3 CASE QC/SCREW STD |
| 20 | ||
| QSM-1/8-6 (153307) | Festo | PUSH-IN CONNECTOR, 1 PORT R 1/8 THREAD & 1 PORT 6MM OD TUBE, BLUE RING |
| 18 | ||
| QST-1/8-6 (153107) | Festo | FITTING, PUSH-IN T, QST-1/8-6 |
| 16 | ||
| QST3-8-6 (153204) | Festo | MULTI-CONNECTOR/DISTRIBUTOR, AIR, 4 OUTPUTS, 8MM & 6MM TUBE CONN, 360 DEG |
| 10 | ||
| 86157 | Murrelektronik GmbH | MST 1-PHASE CONTROL AND ISOLATION TRANSFORMER, P: 5000VA IN: 208..550VAC RoHS : Compliant |
| 3 | ||
| 86152 - | Joslyn Clark | CV VAC CONTACTOR |
| 3 | ||
| SNL 518-615 | SKF | SPLIT PILLOW BLOCK HOUSINGS; SNL 2, 3, 5 AND 6 SERIES |
| 2 | ||
| 86153 | Murrelektronik GmbH | MST 1-PHASE CONTROL AND ISOLATION TRANSFORMER, P: 2000VA IN: 208..550VAC RoHS : Compliant |
| 1 | ||
| CP3119-18 (6151600070) | Chicago Pneumatic | DIE GRINDER, 1/4" COLLET SIZE, 1/2HP, 900W, 3/8" IN, 18000 RPM, CP3119 SERIES |
| 1 | ||
| 8615 | SERPAC Electronic Enclosures | PLASTIC TRAY WITH COVER FOR SE630 |
| 0 | ||
| 8615 | ELESA USA | CWN.32 P-M5X20, WING NUTS, ZINC-PLATED STEEL THREADED STUD |
| 0 | ||
| 8615 | Keystone Electronics Corp | GROMMET, FLEXIBLE; 0.052 MAX PANEL; BLACK; NYLON |
| 0 | ||
| 8615 | MG Chemicals | SUPER THERMAL GREASE,0.12 OZ (3.5G),SYRINGE, USE W/ HEAT SINKS, UP TO 302F, WHITE |
| 0 | ||
![]() Microchip Technology Inc | GC25186-150A | Microchip Technology Inc | Si SRD Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
| GC25186-150A/TR | Microchip Technology Inc | Si SRD Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
![]() Onlinecomponents.com | 980-8615-000 | ITT Interconnect Solutions | 980-8615-000, ITT / Cannon RoHS : Compliant |
| 232 | |
| 8615 | Philmore | FUSE-5AG-15 A. RoHS : Compliant |
| 0 | ||
| 862-8615 | WAGO Innovative Connections | 4-conductor chassis-mount terminal strip - with ground contact - L3-N-PE-L1-L2 - 5-pole - 4 mm² - 4,00 mm² - white RoHS : Compliant |
| 0 | ||
| 62201-8615 | Molex | Press-In Tool for Right Angle Receptacle and Header 5-Row, 5-Column RoHS : Compliant |
| 0 | ||
| 79109-8615 | Molex | 2.00mm Pitch Milli-Grid™ Receptacle, Surface Mount, Vertical, Top/Bottom Entry, with Press-fit Plastic Pegs, with Cap, Embossed Tape on Reel, 0.38µm Gold (Au) Selective, 32 Circuits, Lead-Free RoHS : Compliant |
| 0 | ||
| P-8615 | Stancor | Power Transformer 1500Vrms 12VA 8Term. Solder Lug Flange Mount RoHS : Compliant |
| 0 | ||
| 003-8615-433 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| EUS-704.02-8615 | EAO AG | RoHS : Compliant |
| 0 | ||
| 003-8615-233 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | FDMS86152 | onsemi | MOSFET N-Channel 100V 14A (Ta), 45A (Tc) 8-SON T/R RoHS : Compliant |
| 20,715 | |
| FAN48615UC11X | onsemi | Fixed-Output Synchronous TinyBoost® Regulator RoHS : Compliant |
| 902,353 | ||
| FDMA86151L | onsemi | MOSFET N-Channel 100V 3.3A (Ta) 6-SON T/R RoHS : Compliant |
| 102,000 | ||
| FDMS86150A | onsemi | MOSFET N-Channel 100V 16A (Ta), 60A (Tc) 8-SON T/R RoHS : Compliant |
| 4,770 | ||
| LC78615E-01US-H | onsemi | Audio Signal Processor 1 CH 3V - 3.6V Serial 64-QFP Tray RoHS : Compliant |
| 1,061 | ||
| FDMS86150ET100 | onsemi | MOSFET N-Channel 100V 16A (Ta), 128A (Tc) 8-SON T/R RoHS : Compliant |
| 305 | ||
| PBL38615/1SHA | Infineon Technologies AG | Bipolar SLIC With On-Chip Ring Relay Driver, On-Hook Transmission |
| 6,803 | ||
AD8615AUJZ-REEL7![]() | Analog Devices Inc | Op Amp Standard 24MHz SOT-23-5 T/R RoHS : Compliant |
| 6 | ||
| ADM8615Z050ACBZ-R7 | Analog Devices Inc | Supervisory Circuit 500mV 6-BGA T/R RoHS : Compliant |
| 5,474 | ||
| 5962-88615023A | Analog Devices Inc | Dual marked (AD674ATE/883B) RoHS : Not Compliant |
| 179 | ||
AD8615AUJZ-R2![]() | Analog Devices Inc | Op Amp Zero Drift/Chopper 1.5MHz 8-SOIC T/R RoHS : Compliant |
| 36 | ||
CY7C43686-15AC![]() | Cypress Semiconductor | Bi-Directional FIFO, 16KX36, 10ns, Synchronous, CMOS, PQFP128 RoHS : Not Compliant |
| 233 | ||
| FAN48615UC08X | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 5.25V 1A 9-BGA T/R RoHS : Compliant |
| 11,055 | ||
| FDMS86152 | Fairchild Semiconductor Corporation | MOSFET N-Channel 100V 14A (Ta), 45A (Tc) 8-SON T/R RoHS : Compliant |
| 1,743 | ||
![]() Sager | 78615/9JC-R | Murata Power Solutions | Pulse Transformers 1CT:1CT 10 MH RoHS : Compliant |
| 500 | |
| 1-1478615-1 | TE Connectivity | Basic / Snap Action Switches MP16NOAOLE MICRO SWITCH, PIN P | 0 | |||
| LELBX11-32886-15-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 78615/8JC | Murata Power Solutions | Pulse Transformers TRANSFORMER 1CT:1CT 1 MH RoHS : Compliant |
| 0 | ||
| 78615/8MC-R | Murata Power Solutions | Pulse Transformers PLEASE SEE MURATA'S SUGGESTED ALTERNATE 78615/8JC-R RoHS : Compliant | 0 | |||
| 9758615068 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758615149 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 650861-5 | TE Connectivity | DIN 41612 Connectors 064 EURO TYPE B RECE RoHS : Not Compliant |
| 0 | ||
| 786155-7 | TE Connectivity | D-Sub High Density Connectors 68 50SR VRT RCPT PIN RoHS : Not Compliant |
| 0 | ||
| 78615/2C | Murata Power Solutions | Pulse Transformers TRANSFORMER 1CT:1CT 500UH 10V RoHS : Compliant | 0 | |||
| 178.6152.0001 | Littelfuse Inc | HOLDER FOR FKH (ATO) RoHS : Compliant |
| 0 | ||
| 0286-15 | C&K Switches | Littelfuse | 0 | |||
| 861529 | TE Connectivity | Sensor Hardware & Accessories 9FR,MEAS GP RJ MARKED | 0 | |||
| 9758615066 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858615007 | Qnity Laird | Laird Technologies | 0 | |||
![]() ComSIT USA | 5023861570 | Molex | AVAILABLE EU RoHS : Compliant | 3,398 | ||
| JZ015508615 | AIRMEDTEC GMBH | AVAILABLE EU | 192 | |||
![]() Interstate Connecting Components | RJE721886152 | Amphenol Commercial | 8P8C, RA, CAT5E, SHIELD, RECES | 0 | ||
| 650861-5 | TE Connectivity | 064 EURO TYPE B RECEPT ST ASSY RoHS : Not Compliant |
| 0 | ||
| YQ0861500000G | Amphenol Anytek | YQ- 3.81- 24P GREEN RIGHT - | 0 | |||
| 786155-7 | TE Connectivity | 68 50SR VRT RCPTLTCHACT PIN RoHS : Not Compliant |
| 0 | ||
| RJE581886156N | Amphenol Commercial | 8P8C, THR, RA, CAT5E, SHIELD, | 0 | |||
| 8615292013 | SOURIAU-SUNBANK | 0 | ||||
| 5786155-5 | TE Connectivity | 50 50SR VRT RCPTLTCHACT PIN RoHS : Compliant |
| 0 | ||
| 248-8615-232 | ITT Interconnect Solutions | 248-8615-232 | 0 | |||
| YL2861510000G | Amphenol Anytek | YL- 5.08- 214P GREEN RIGHT - | 0 | |||
| YL2861500000G | Amphenol Anytek | YL- 5.08- 214P GREEN RIGHT | 0 | |||
| DBAS 78-61-5 PN | TE Connectivity | DBAS 78-61-5 PN | 0 | |||
| EW0861510000G | Amphenol Anytek | EW-10.16-8P GREEN ROHS 90D CO | 0 | |||
| YQ486150A000G | Amphenol Anytek | YQ- 3.81- 224P GREEN RIGHT - | 0 | |||
| 583861-5 | TE Connectivity | TW-LEAF CRP HSG. 6 POS. 100 C/ RoHS : Compliant |
| 0 | ||
| 003-8615-030 | ITT Interconnect Solutions | 003-8615-030 | 0 | |||
![]() PEI Genesis | M24308/6-15F | Amphenol Positronic |
| 0 | ||
| M24308/6-15F | Amphenol PCD |
| 0 | |||
| S982-C86-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
| 86-152 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| S386-158R-M | SOURIAU-SUNBANK |
| 0 | |||
| S11-PT86-1.5A | SOURIAU-SUNBANK |
| 0 | |||
| S386-158R-4-M | SOURIAU-SUNBANK |
| 0 | |||
| S386-158R-4AM | SOURIAU-SUNBANK |
| 0 | |||
| 23A02686-15 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02038-615 | SOURIAU-SUNBANK |
| 0 | |||
| 430-8615-000 | ITT Interconnect Solutions |
| 0 | |||
| S982-C186-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
| 86-151S | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| J1586-15H34 | SOURIAU-SUNBANK |
| 0 | |||
| M24308/6-15Z | Amphenol Positronic |
| 0 | |||
![]() Chip 1 Exchange | PHY2238-586-15649 | YAGEO Corporation | INSTOCK | 79,000 | ||
| 2118615-1 | TE Connectivity | INSTOCK | 14,040 | |||
| FDMS86150A | onsemi | INSTOCK RoHS : Compliant | 7,800 | |||
AD8615AUJZ-REEL7![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 7,592 | |||
| 2-583861-5 | TE Connectivity | INSTOCK RoHS : Compliant | 6,208 | |||
| W28-X1086-15 | TE Connectivity | INSTOCK RoHS : Compliant | 5,716 | |||
| 2238-586-15521 | YAGEO Corporation | INSTOCK | 3,906 | |||
| 2238-586-15632 | INSTOCK | 3,733 | ||||
| 583861-5 | TE Connectivity | INSTOCK RoHS : Compliant | 2,600 | |||
| 22388615151- | INSTOCK | 2,000 | ||||
| 73386-1570 | Molex | INSTOCK | 1,441 | |||
| PS8615QFN56GTR-A2 | INSTOCK | 864 | ||||
| P51C8615 | INSTOCK | 300 | ||||
AD8615AUJZ-R2![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 209 | |||
| PS8615QFN56GTR-A2 | PARAT | INSTOCK | 114 | |||
![]() Avnet Abacus | 861529 | TE Connectivity | (Alt: 11032861-00) RoHS : Compliant | 0 | ||
| 650861-5 | TE Connectivity | Conn DIN 41612 RCP 64 POS 254mm Solder ST ThruHole (Alt: 650861-5) RoHS : Not Compliant | 0 | |||
| 786155-7 | TE Connectivity | (Alt: 786155-7) RoHS : Not Compliant | 0 | |||
| 78615/2C | Murata Manufacturing Co Ltd | (Alt: 78615/2C) RoHS : Compliant | 0 | |||
| 78615/8JC | Murata Manufacturing Co Ltd | (Alt: 78615/8JC) RoHS : Compliant | 0 | |||
| 986151002 | Molex | (Alt: 986151002) RoHS : Compliant | 0 | |||
| 78615/16MC | Murata Manufacturing Co Ltd | (Alt: 78615/16MC) RoHS : Compliant | 0 | |||
| 78615/8MC-R | Murata Manufacturing Co Ltd | Pulse Transformer 11 1000Vrms 045Ohm Prim DCR 10pF 15Vus Surface Mount (Alt: 78615/8MC-R) RoHS : Compliant | 0 | |||
| 78615/2JC-R | Murata Manufacturing Co Ltd | (Alt: 78615/2JC-R) RoHS : Compliant | 0 | |||
| 78615/9JC-R | Murata Manufacturing Co Ltd | Pulse Transformer 1CT1CT 10 mH 145 ohm 56 Vs 1 kV 786J Series - Tape and Reel (Alt: 78615/9JC-R) RoHS : Compliant | 0 | |||
| BFC237086153 | Vishay Intertechnologies | General Purpose Film Capacitor Metallized PET Radial Box 2 Pin 0015 uF 5 63 V 100 V - Tape and Reel (Alt: BFC237086153) RoHS : Compliant | 0 | |||
| 78615/16JC-R | Murata Manufacturing Co Ltd | Pulse Transformer 1CT1CT 1000Vrms 092Ohm Prim DCR 20pF 28Vus Surface Mount (Alt: 78615/16JC-R) RoHS : Compliant | 0 | |||
| YQ0861500000G | Amphenol Corporation | (Alt: YQ0861500000G) RoHS : Compliant | 0 | |||
| MAL205786151E3 | Vishay Intertechnologies | (Alt: MAL205786151E3) RoHS : Compliant | 0 | |||
| MKP1848615454P2 | Vishay Intertechnologies | (Alt: MKP1848615454P2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | FDMS86150 | onsemi | Power MOSFET, N Channel, 100 V, 80 A, 0.00485 ohm, Power 56, Surface Mount (Alt: FDMS86150) RoHS : Compliant |
| 0 | |
| 10118615-518003LF | Amphenol Corporation | (Alt: 10118615-518003LF) RoHS : Compliant | 0 | |||
| 0686-1500-01 | Bel Fuse | (Alt: 0686-1500-01) RoHS : Compliant | 0 | |||
| L886-152T-CN | Bel Fuse | MAGJACK 1000BASET, 1X2, G/G, TAB UP (Alt: L886-152T-CN) RoHS : Compliant | 0 | |||
| FDMS86150A | onsemi | N-Channel Shielded Gate PowerTrench? MOSFET 100V, 80A, 4.85mO N-Channel Shielded Gate PowerTrench? MOSFET 100V, 80A, 4.85mO (Alt: FDMS86150A) RoHS : Compliant | 0 | |||
| 1658615-3 | TE Connectivity | D Sub Connector, DB15, Standard, Plug, AMPLIMITE HDF, 15 Contacts, DA, IDC / IDT (Alt: 1658615-3) RoHS : Compliant | 0 | |||
| 5023861570 | Molex | PCB Receptacle, 15 Contacts, 1 Row, 1.25mm, Tin, 1A, SMT, Right Angle, Copper Alloy, Wire-to-Board (Alt: 5023861570) RoHS : Compliant | 0 | |||
| 2018615000 | Molex | SEALDED CONN REC TERMINAL (M) 3.8 (Alt: 2018615000) RoHS : Compliant | 0 | |||
| 5650861-5 | TE Connectivity | (Alt: 5650861-5) RoHS : Compliant | 0 | |||
| 583861-5 | TE Connectivity | (Alt: 583861-5) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FDMS86152 | onsemi | NChannel PowerTrench MOSFET 100V 45A 6mO (Alt: FDMS86152) RoHS : Compliant | 0 | ||
| FDMS86150 | onsemi | Power MOSFET N Channel 100 V 80 A 000485 ohm Power 56 Surface Mount (Alt: FDMS86150) RoHS : Compliant | 0 | |||
| PAM8615RHR | Diodes Incorporated | Audio Amp Speaker 2CH Stereo ClassD 24Pin TSSOP TR (Alt: PAM8615RHR) RoHS : Compliant | 0 | |||
| FDMA86151L | onsemi | NChannel PowerTrench MOSFET 100V 33A 88mO (Alt: FDMA86151L) RoHS : Compliant | 0 | |||
| FDMS86150A | onsemi | NChannel Shielded Gate PowerTrenchMOSFET 100V 80A 485mO NChannel Shielded Gate PowerTrench MOSFET 100V 80A 485mO (Alt: FDMS86150A) RoHS : Compliant | 0 | |||
| FDMS86150ET100 | onsemi | NChannel Shielded Gate PowerTrench MOSFET 100V 128A 485mO (Alt: FDMS86150ET100) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2238-586-15633 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 112,000 | |
| 2238-786-15649 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 23,900 | ||
| 2238-786-15649 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 13,898 | ||
| 2238-786-15649 | Vishay Vitramon | IN STOCK SHIP TODAY |
| 3,971 | ||
| 2238-586-15619 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,900 | ||
| 2238-586-15649 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,075 | ||
| 2238-586-15618 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,000 | ||
| 2238-586-15641 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 2,100 | ||
| 2238-586-15623 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 1,890 | ||
| 2238-586-15636 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 1,450 | ||
| 2238-586-15636 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 550 | ||
| B32861-58 | Nidec Corporation | IN STOCK SHIP TODAY | 197 | |||
| 86152-3000 | Molex | IN STOCK SHIP TODAY RoHS : Compliant | 4 | |||
| 78615/4C | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 650861-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | R4-81-861-50-KD10 | Southco | R4-81-861-50-KD10 | 0 | ||
| 47-81-286-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-80-286-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| R4-81-861-50-MK10 | Southco | R4-81-861-50-MK10 | 0 | |||
| 47-10-286-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 498615 | Essentra Components | 0 | ||||
| 47-11-286-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | FDMS86152 | onsemi | NChannel PowerTrench MOSFET 100V 45A 6mO (Alt: FDMS86152) RoHS : Compliant | 0 | ||
| FDMS86150 | onsemi | Power MOSFET N Channel 100 V 80 A 000485 ohm Power 56 Surface Mount (Alt: FDMS86150) RoHS : Compliant | 0 | |||
| FDMA86151L | onsemi | NChannel PowerTrench MOSFET 100V 33A 88mO (Alt: FDMA86151L) RoHS : Compliant | 0 | |||
| FDMS86150A | onsemi | NChannel Shielded Gate PowerTrenchMOSFET 100V 80A 485mO NChannel Shielded Gate PowerTrench MOSFET 100V 80A 485mO (Alt: FDMS86150A) RoHS : Compliant | 0 | |||
| FDMS86150ET100 | onsemi | NChannel Shielded Gate PowerTrench MOSFET 100V 128A 485mO (Alt: FDMS86150ET100) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FAN48615UC11X | onsemi | Stock, Ship Today RoHS : Compliant |
| 26,650 | |
| FDMS86150A | onsemi | Stock, Ship Today RoHS : Compliant | 19,515 | |||
| LC78615E-01US-H | onsemi | Stock, Ship Today RoHS : Compliant | 8,932 | |||
| FDMS86150ET100 | onsemi | Stock, Ship Today RoHS : Compliant | 324 | |||
![]() Master Electronics | 178.6152.0001 | Littelfuse Commercial Vehicle Products | Fuse Holder Blade 80V Chass Mnt | Littelfuse 178.6152.0001 RoHS : Compliant |
| 860 | |
| 786155-7 | TE Connectivity | 68 50SR VRT RCPT LTCH ACT PIN RoHS : Not Compliant |
| 211 | ||
| 8615 | Philmore | FUSE-5AG-15 A. RoHS : Compliant |
| 0 | ||
| 650861-5 | TE Connectivity | 064 EURO TYPE B RECEPT ST ASSY RoHS : Not Compliant |
| 0 | ||
| 07630861548 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-186-158 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-186-157 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-086-155 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 07630861545 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 07630861590 | 3M Interconnect | Conn Shrouded Header HDR 4 POS 1.27mm Solder ST SMD T/R RoHS : Compliant |
| 0 | ||
| C115288-6154 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-086-150 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-186-157 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-186-153 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-22-05-L-D-486-152-A-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA186-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM1 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Orange-15M. Pasternack’s PE3FCA186-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA186-15M fiber optic cable with a 4.5 mm cable diameter and 45 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 168 | |
| PE3FCA286-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC UPC to SC UPC, OM3 Multimode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA286-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 6-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA286-15M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 92 | ||
| PE3C5886-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 7/16 DIN Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and SMA cable connection on the other. Our low PIM 7/16 DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to SMA cable is a male to male coax assembly, PE3C5886-150CM, can also be known as a low PIM 7/16 DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to SMA plug cable assembly PE3C5886-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5886-150CM can also be used in the other direction and will be SMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to SMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 85 | ||
| PE3C8486-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Fire Rated 7/16 DIN Male to N Female Bulkhead Low PIM Cable 150 CM Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN male to N female bulkhead low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN male to N female bulkhead low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N bulkhead cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to N type cable is a male to female coax assembly, PE3C8486-150CM, can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8486-150CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8486-150CM can also be used in the other direction and will be type N female bulkhead to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN male to N female bulkhead low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C6186-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.3-10 Male to 7/16 DIN Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6186-150CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6186-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6186-150CM can also be used in the other direction and will be TC-SPP250-716M-LP 7/16 DIN male to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE3W17861-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Female to NEX10 Female Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly NEX10 female to NEX10 female low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female to NEX10 female low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17861-50CM can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17861-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17861-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 22 | ||
| PE3C3286-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to N Female Bulkhead Cable 59.06 Inch Length Using RG402 Coax., Radio frequency assembly N male to N female bulkhead cable 59.06 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 59.06 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C3286-150CM, can also be known as a N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C3286-150CM is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3286-150CM can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 59.06 inch length using RG402 coax. |
| 0 | ||
| PE3C7861-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 2.2-5 Male Right Angle to 2.2-5 Female Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7861-50CM, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7861-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7861-50CM can also be used in the other direction and will be 2.2-5 female to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female low PIM cable 50 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8615 | Pasternack Enterprises | 0 | ||||
| PE38615 | Pasternack Enterprises | 0 | ||||
| PE3C7986-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male to 4.3-10 Female Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a female on end 2. PE3C7986-150CM can also be known as a low PIM 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7986-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to 4.3-10 female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7986-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7986-150CM can also be used in the other direction and will be a 4.3-10 female to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7286-150CM | Pasternack Enterprises |
| 0 | |||
| PE34786-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. SMA Female Bulkhead to MMCX Plug Right Angle Cable 150 cm Length Using RG174 Coax., Radio frequency assembly SMA female bulkhead to MMCX plug right angle cable 150 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to MMCX plug right angle cable 150 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assemblies have a female gender on end 1 and plug on end 2. This SMA to MMCX cable is a female to plug coax assembly, PE34786-150CM, can also be known as a SMA jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MMCX male cable assembly PE34786-150CM is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female bulkhead to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34786-150CM can also be used in the other direction and will be right angle MMCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to MMCX plug right angle cable 150 cm length using RG174 coax. |
| 0 | ||
| PE3W08886-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMP Female Right Angle to SMP Female Right Angle Cable 150 cm Length Using PE-SR405FLJ Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 150 cm length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMP female right angle cable 150 cm length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3W08886-150CM, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W08886-150CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 150 cm length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W18615/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to SMA Female Bulkhead Cable Using LMR-100A-UF Coax with HeatShrink. PE3W18615/HS is a FAKRA jack to SMA female bulkhead cable using LMR-100A-UF coax. This Pasternack FAKRA jack to SMA female bulkhead cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18615/HS FAKRA jack to SMA female bulkhead cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | 78615/8JC | Murata Manufacturing | Pulse Transformer, GENERAL PURPOSE Application(s), 1CT:1CT | 18,260 | ||
| 78615/16JC-R | Murata Manufacturing | Pulse Transformer, GENERAL PURPOSE Application(s), 1CT:1CT | 17,344 | |||
| 5962-88615013A | Analog Devices Inc | RoHS : Not Compliant | 12,160 | |||
| MAX78615PPM70EVK1 | Analog Devices (Maxim Integrated) | 11,498 | ||||
| MAX78615-PPM-C01T | Analog Devices (Maxim Integrated) | 11,200 | ||||
| 5962-88615023A | Analog Devices Inc | RoHS : Not Compliant | 11,084 | |||
| ADM8615Z050ACBZ-R7 | Analog Devices Inc | Power Supply Management Circuit, Adjustable, 1 Channel, CMOS, PBGA6 RoHS : Compliant | 10,640 | |||
| MAX78615-PPM-A03T | Analog Devices (Maxim Integrated) | 10,272 | ||||
AD8615AUJZ-REEL7![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 0.8uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 10,109 | |||
| MKP1848615454P2 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 450V, 5% +Tol, 5% -Tol, 15uF, Through Hole Mount RoHS : Compliant | 9,925 | |||
| MAX78615-PPM-A03 | Analog Devices (Maxim Integrated) | 9,802 | ||||
| MAX86150EFF+T | Analog Devices Inc | Analog Circuit, 1 Func, PBGA22 RoHS : Compliant | 7,536 | |||
| MAX86150EFF-T | Analog Devices (Maxim Integrated) | 6,056 | ||||
| 5962-88615023X | Analog Devices Inc | A/D Converter, 12-Bit, 1 Func, 1 Channel, CQCC28 RoHS : Not Compliant | 5,908 | |||
| 5962-8861501XA | Analog Devices Inc | RoHS : Not Compliant | 5,036 | |||
![]() Win Source Electronics | AD8615AUJREEL7 | ADI Electronics Inc |
| 48,000 | ||
| AD8615AUJZ | Analog Devices Inc | Op Amp Single Precision Amplifier R-R I/O 5V 5-Pin TSOT |
| 21,000 | ||
AD8615AUJZ-R2![]() | Analog Devices Inc | Precision, 20 MHz, CMOS, Rail-to-Rail Input/Output Operational Amplifiers | IC OPAMP GP 1 CIRCUIT TSOT5 RoHS : Compliant |
| 19,770 | ||
AD8615AUJZ-REEL![]() | Analog Devices Inc | IC OPAMP GP 1 CIRCUIT TSOT23-5 / Precision, 20 MHz, CMOS, Rail-to-Rail Input/Output Operational Amplifiers RoHS : Compliant |
| 19,400 | ||
AD8615AUJZ-REEL7![]() | Analog Devices Inc | IC OPAMP GP 24MHZ RRO TSOT23-5 RoHS : Compliant |
| 19,110 | ||
![]() Wuhan P&S | FDMS86150A | onsemi | 100V, 80A, 4.85m��,N-Channel Power MOSFET RoHS : Compliant |
| 6,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |