| Electronic Components Datasheet Search |
|
8324 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Future Electronics | 8324 | Keystone Electronics Corp | Self-Aligning T-1 3/4 Natural Nylon .350 inch Long LED Spacer Mount RoHS : Compliant |
| 0 | |
![]() Verical | 8-324001-1 | TE Connectivity | Splice Terminal 20-24AWG Copper 12.45mm Tin Loose RoHS : Compliant |
| 4,100 | |
| 8-32448-1 | TE Connectivity | Splice Terminal 14-16AWG Copper Blue 22.3mm Tin Loose RoHS : Compliant |
| 1,100 | ||
| 8-32448-1 | TE Connectivity | Splice Terminal 14-16AWG Copper Blue 22.3mm Tin Loose RoHS : Compliant |
| 500 | ||
| 8324 | Abbatron | Standoff Round F 4-40-THD Aluminum RoHS : Compliant |
| 300 | ||
| 83240223 | Crouzet | Switch Snap Action N.O./N.C. SPDT Roller Lever Screw 6A 250VAC 250VDC 2.7N Screw Mount |
| 252 | ||
| 8-324172-2 | TE Connectivity | Spade Tongue Terminal 10-12AWG Copper Yellow 25.83mm Tin Loose RoHS : Compliant |
| 250 | ||
| 8-32446-1 | TE Connectivity | Splice Terminal 16-22AWG Copper Red 22.3mm Tin Loose RoHS : Compliant |
| 48 | ||
| 83241220 | Crouzet | Switch Snap Action N.O./N.C. SPDT Overtravel Plunger Screw 0.1A 30VAC 30VDC 4.5N Screw Mount |
| 30 | ||
| 83240200 | Crouzet | Switch Snap Action N.O./N.C. SPDT Overtravel Plunger Quick Connect 6A 250VAC 250VDC 4.5N Screw Mount |
| 26 | ||
| 83241034 | Crouzet | Switch Snap Action N.O./N.C. SPDT Roller Lever Screw 0.1A 30VAC 30VDC 2.7N Panel Mount |
| 24 | ||
| 83240213 | Crouzet | Switch Snap Action N.O./N.C. SPDT Roller Lever Quick Connect 6A 250VAC 250VDC 2.7N Screw Mount |
| 21 | ||
| 83240005 | Crouzet | Switch Snap Action N.O./N.C. SPDT Roller Lever Quick Connect 6A 250VAC 250VDC 2.7N Panel Mount |
| 20 | ||
| 83240034 | Crouzet | 0 |
| 10 | ||
| 83241020 | Crouzet | Switch Snap Action N.O./N.C. SPDT Overtravel Plunger Screw 0.1A 30VAC 30VDC 4.5N Screw Mount |
| 10 | ||
| 83240020 | Crouzet | Switch Snap Action N.O./N.C. SPDT Overtravel Plunger Screw 6A 250VAC 250VDC 4.5N Screw Mount |
| 5 | ||
![]() Avnet Americas | PIC16F18324T-I/ST | Microchip Technology Inc | 8-bit MCU, PIC16, 32 MHz, 7 KB, 512 Bytes, 14 Pins, TSSOP - Tape and Reel (Alt: PIC16F18324T-I/ST) RoHS : Compliant |
| 42,500 | |
| 87832-4020 | Molex | Pin Header, 40 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Shrouded, Phosphor Bronze, SMT, Polyamide - Rail/Tube (Alt: 0878324020) RoHS : Compliant |
| 4,548 | ||
| PIC16F18324-I/ST | Microchip Technology Inc | MCU 8-Bit PIC16 PIC RISC 7KB Flash 3.3V/5V 14-Pin TSSOP Tube - Rail/Tube (Alt: PIC16F18324-I/ST) RoHS : Compliant |
| 576 | ||
| PIC16F18324-I/SL | Microchip Technology Inc | 8 Bit MCU, PIC16 Family PIC16F183xx Series Microcontrollers, PIC16, 32 MHz, 7 KB, 14 Pins, SOIC - Rail/Tube (Alt: PIC16F18324-I/SL) RoHS : Compliant |
| 46 | ||
| BFC238324823 | Vishay Intertechnologies | Power Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 0.082 uF, ? 5%, Through Hole, 220 V - Bulk (Alt: BFC238324823) RoHS : Compliant |
| 0 | ||
| C18324_ADELIA-110-ADAPTER-B | LEDIL | Basepart for ADELIA Reflector 54mm X 0.5mm Box - Bag (Alt: C18324_ADELIA-110-ADAPTER-B) RoHS : Compliant |
| 0 | ||
| MKP383243200JF02W0 | Vishay Intertechnologies | Power Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 4300 pF, ? 5%, Through Hole, 700 V - Tape and Reel (Alt: MKP383243200JF02W0) RoHS : Compliant | 0 | |||
| EM278324 | Eaton Corporation | - Bulk (Alt: EM278324) RoHS : Not Compliant |
| 0 | ||
| HTS00583244FKB17 | Vishay Intertechnologies | - Bulk (Alt: HTS00583244FKB17) RoHS : Compliant |
| 0 | ||
| 8-324581-2 | TE Connectivity | - Bulk (Alt: 8-324581-2) RoHS : Compliant | 0 | |||
| BFC238324684 | Vishay Intertechnologies | Power Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 0.68 uF, ? 5%, Through Hole, 220 V - Bulk (Alt: BFC238324684) RoHS : Compliant |
| 0 | ||
| 10-183240-014 | Amphenol Corporation | - Bulk (Alt: 10-183240-014) RoHS : Not Compliant |
| 0 | ||
| 8000078324 | Weidmüller Interface GmbH & Co. KG | MHS 7S/05 W T3 B T - Bulk (Alt: 8000078324) RoHS : Not Compliant |
| 0 | ||
| 7010508324 | 3M Interconnect | CLOTH ROLL 341D, P320 X-WEIGHT, 36 IN X - Cable Rools/Shrink Tubing (Alt: 7010508324) RoHS : Not Compliant |
| 0 | ||
| S41C083242GP | CTS Corporation | Fixed Network Resistor, 2.4 kohm, Isolated, 4 Resistors, 0402 [1005 Metric], Concave, ? 2%, 50 V - Tape and Reel (Alt: S41C083242GP) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | 324955 | TE Connectivity | Terminals LUG RING TONGUE AWG 14-16 RoHS : Compliant |
| 105,486 | |
| 324001 | TE Connectivity | Terminals SPLICE SOLIS BUTT ST RoHS : Compliant |
| 40,023 | ||
| 324075 | TE Connectivity | Terminals NYLON RING 26-22 10 RoHS : Compliant |
| 32,548 | ||
| 324918 | TE Connectivity | Terminals TERMINAL PIDG R 12-1 RoHS : Compliant |
| 18,115 | ||
| 324485 | TE Connectivity | Terminals UNSTRIPPED WIRE CAP red RoHS : Compliant |
| 16,146 | ||
| 32448 | TE Connectivity | Terminals KNIFE DISCNT 16-14 RoHS : Compliant |
| 12,619 | ||
| 1-324918-0 | TE Connectivity | Terminals TERMINAL R 12-10 10 RoHS : Compliant |
| 7,095 | ||
| 32446 | TE Connectivity | Terminals KNIFE DISCNT 22-16 RoHS : Compliant |
| 7,074 | ||
| 324915 | TE Connectivity | Terminals NYL-RING 12-10 YEL #8 RoHS : Compliant |
| 6,755 | ||
| 324159 | TE Connectivity | Terminals PIDG RING TONGUE RoHS : Compliant |
| 6,460 | ||
| 32498 | TE Connectivity | Terminals FLANGE SPADE 22-16 8 RoHS : Compliant |
| 6,402 | ||
| 8324 | Keystone Electronics Corp | LED Mounting Hardware .35" T1 3/4 BI-LEAD .197 (5mm) DIA RoHS : Compliant |
| 881 | ||
| 8-324918-2 | TE Connectivity | Terminals PIDG RING 12-10 RoHS : Compliant |
| 674 | ||
| 11-40-4128 | Molex | Punches & Dies 8324-6 INSULATION PUNCH RoHS : Compliant |
| 0 | ||
| 11-40-4126 | Molex | Punches & Dies 8324-4 BARREL FORM PUNCH RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 8-324001-1 | TE Connectivity | Splice Terminal 20-24AWG Copper 12.45mm Tin Loose RoHS : Compliant |
| 3,000 | |
| 832-40-022-30-052000 | Mill-Max Mfg Corp | Conn Shrouded Header (4 Sides) HDR 22 POS 2mm Solder ST SMD RoHS : Compliant |
| 49 | ||
![]() Newark | 78438324047HT | Wurth Elektronik | Power Inductor, 4.7Uh, 1.4A, Shielded; |Würth Elektronik 78438324047HT RoHS : Compliant |
| 1,000 | |
| 78438324047HT | Wurth Elektronik | Power Inductor, 4.7Uh, 1.4A, Shielded; |Würth Elektronik 78438324047HT RoHS : Compliant |
| 1,000 | ||
| 78438324033HT | Wurth Elektronik | Power Inductor, 3.3Uh, 1.7A, Shielded; |Würth Elektronik 78438324033HT RoHS : Compliant |
| 1,000 | ||
| 78438324033HT | Wurth Elektronik | Power Inductor, 3.3Uh, 1.7A, Shielded; |Würth Elektronik 78438324033HT RoHS : Compliant |
| 1,000 | ||
| 784383240047HT | Wurth Elektronik | Power Inductor, 470Nh, 5.3A, Shielded; |Würth Elektronik 784383240047HT RoHS : Compliant |
| 1,000 | ||
| 784383240047HT | Wurth Elektronik | Power Inductor, 470Nh, 5.3A, Shielded; |Würth Elektronik 784383240047HT RoHS : Compliant |
| 1,000 | ||
| 78438324010HT | Wurth Elektronik | Power Inductor, 1Uh, 3.9A, Shielded; |Würth Elektronik 78438324010HT RoHS : Compliant |
| 848 | ||
| 78438324010HT | Wurth Elektronik | Power Inductor, 1Uh, 3.9A, Shielded; |Würth Elektronik 78438324010HT RoHS : Compliant |
| 848 | ||
| FMCA1483-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm; |Fairview Microwave FMCA1483-24 RoHS : Not Compliant |
| 328 | ||
| 74438324012HT | Wurth Elektronik | Power Inductor, 1.2Uh, Shielded, 3.5A; |Würth Elektronik 74438324012HT RoHS : Compliant |
| 160 | ||
| 8000078324 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Header, 5Pos, Th; Gender:Header; Pitch Spacing:7.5Mm; No. Of Positions:5Positions; Rated Current:30.6A; Rated Voltage:630V; Block Orientation:Through Hole 270°; Product Range:Omnimate 4.0 Mhs Series Rohs Compliant: Yes RoHS : Compliant |
| 45 | ||
| FMCA2983-24 | Fairview Microwave Inc | Cbl Assy, Qma Plug-R/A Plug, 50 Ohm, 24"; |Fairview Microwave FMCA2983-24 RoHS : Not Compliant |
| 4 | ||
| FMC01083-24 | Fairview Microwave Inc | Sma Male-Mini Smp Female Cbl Rg405; |Fairview Microwave FMC01083-24 RoHS : Not Compliant |
| 1 | ||
| 8324 | Keystone Electronics Corp | Led Spacer; Height:8.89Mm; Spacer Materi |Keystone 8324 RoHS : Compliant |
| 0 | ||
| 8324 | Abbatron | Standoff; |Abbatron Hh Smith 8324 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | ADM8324WCA46ARJZR7 | Analog Devices Inc | T_rst_min=140ms, T_wd__fast_ma RoHS : Compliant |
| 9,000 | |
AD8324JRQZ-REEL7![]() | Analog Devices Inc | Low Cost 3.3V Cable Line Drive RoHS : Compliant |
| 5,200 | ||
AD8324ACPZ![]() | Analog Devices Inc | Low Cost 3.3V Cable Line Drive RoHS : Compliant |
| 4,410 | ||
| ADM8324WAH29ARJZR7 | Analog Devices Inc | T_rst_min=1ms, T_wd__fast_max= RoHS : Compliant |
| 557 | ||
AD8324ACPZ-REEL7![]() | Analog Devices Inc | Low Cost 3.3V Cable Line Drive RoHS : Compliant |
| 300 | ||
| ADM8324WCA29ARJZR7 | Analog Devices Inc | T_rst_min=140ms, T_wd__fast_ma RoHS : Compliant |
| 252 | ||
| 806-0683-24+D | Analog Devices Inc | Custom ASIC - PMU | 0 | |||
![]() RS | 8-324015-2 | TE Connectivity | TERMINAL SPADE TONGUE, FLANGE MOUNT, 12-10AWG, STUD SIZE 10, YELLOW, AMP SERIES RoHS : Compliant |
| 1,650 | |
| D-8324-A | Bimba Manufacturing Company | 240Z PIVBRT FIN |
| 31 | ||
| 74438324015 (8630766) | Wurth Elektronik | WE-MAPI SMD POWER INDUCTOR 1.5UH 2.2A |
| 23 | ||
| 556-1608-324F | Dialight | PANEL MOUNT INDICATOR, FLAT, GREEN, 37 VDC, C1D2, 1 INCH RoHS : Compliant |
| 14 | ||
| 48-32-4094 | Milwaukee Electric Tool Corporation | SHOCKWAVE IMPACT DUTY DRIVER BIT SET - 80PC |
| 12 | ||
| 1-1718324-1 | TE Connectivity | AMP MCP 1.5/2.8 SERIES, 62 WAY CABLE MOUNT PLUG HOUSING RoHS : Compliant |
| 7 | ||
| 48-32-4004 | Milwaukee Electric Tool Corporation | DRIVER BIT SET; 32 PCS. SHOCKWAVE |
| 5 | ||
| 48-32-4616 | Milwaukee Electric Tool Corporation | SHOCKWAVE IMPACT HEX INSERT BIT SET -9PC |
| 5 | ||
| 48-32-4461 | Milwaukee Electric Tool Corporation | SHOCKWAVE 2 -INCH IMPACT PHILLIPS NO.1 POWER BIT |
| 4 | ||
| 83242 0011000 | Belden Inc | COAXIAL CABLE, RG142B/U,18 AWG, SCCS, SOLID, BRAID SHLD, COPPER, TFE INS, BROWN JKT |
| 2 | ||
| SIEN-M12B-NS-K-L-PA (538324) | Festo | PROXIMITY SENSOR, M12X1, FLUSH MT, NPN, CLOSING, OPEN END, POLYAMID |
| 2 | ||
| 48-32-4091 | Milwaukee Electric Tool Corporation | CARABINER SHOCKWAVE SQ 2 SET MILWAUKEE ELECTRIC TOOL |
| 1 | ||
| SL10VB6VQ (58324) | Banner Engineering Corp | SLOT SENSOR, SLOT WIDTH, 10 MM, INPUT, SL10 SERIES |
| 1 | ||
| 8324 | HH Smith | STANDOFF; ROUND; ALUMINUM; 4-40 THREAD; 1/4" OD; 5/8" LENGTH; FULL THREAD |
| 0 | ||
| 8324 | Keystone Electronics Corp | LED SPACER RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | PIC16LF18324-I/ST | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, TSSOP, Projected EOL: 2041-08-14 RoHS : Compliant |
| 39,420 | |
| PIC16F18324T-I/SL | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, SOIC, Projected EOL: 2041-08-14 RoHS : Compliant |
| 23,400 | ||
| PIC16LF18324-I/JQ | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, UQFN, Projected EOL: 2041-08-14 RoHS : Compliant |
| 20,585 | ||
MCP73832-4ADI/MC![]() | Microchip Technology Inc | 500 mA Single Cell Li-Ion/Li-Polymer charge Mgmt controller, DFN, Projected EOL: 2036-03-14 RoHS : Compliant |
| 19,200 | ||
| PIC16F18324-E/ST | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, TSSOP, Projected EOL: 2041-08-14 RoHS : Compliant |
| 8,664 | ||
| PIC16F18324T-E/SLVAO | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, SOIC, Projected EOL: 2046-09-07 RoHS : Compliant |
| 7,800 | ||
| PIC16F18324T-I/ST | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, TSSOP, Projected EOL: 2041-08-14 RoHS : Compliant |
| 7,500 | ||
| PIC16LF18324T-E/ST | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, TSSOP, Projected EOL: 2046-09-13 RoHS : Compliant |
| 5,000 | ||
| PIC16F18324-I/ST | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, TSSOP, Projected EOL: 2041-08-14 RoHS : Compliant |
| 3,270 | ||
| PIC16F18324-E/JQVAO | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, UQFN, Projected EOL: 2046-09-07 RoHS : Compliant |
| 2,457 | ||
| PIC16F18324T-E/JQVAO | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, UQFN, Projected EOL: 2046-08-29 RoHS : Compliant |
| 2,185 | ||
| PIC16LF18324-I/SL | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, SOIC, Projected EOL: 2041-08-14 RoHS : Compliant |
| 1,596 | ||
| PIC16LF18324-E/P | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, PDIP, Projected EOL: 2041-08-14 RoHS : Compliant |
| 577 | ||
| PIC16LF18324-E/JQ | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, UQFN, Projected EOL: 2041-08-14 RoHS : Compliant |
| 72 | ||
| PIC16F18324-I/SL | Microchip Technology Inc | 7KB, 512B RAM, 256B EEPROM, 10b ADC, Comp, 5b DAC, 10b PWM, CCP, CLC, NCO, CWG, SOIC, Projected EOL: 2041-08-14 RoHS : Compliant |
| 39 | ||
![]() Bisco Industries | 8324 | Keystone Electronics Corp | RoHS : Compliant | 282 | ||
| M83248/2-906 | Military Specifications | 228 | ||||
| M83248/1-168 | Military Specifications | 100 | ||||
| M83248/2-908 | Military Specifications | 70 | ||||
| WJ9740-B-0832-4 | W.J. Roberts Co Inc | 36 | ||||
| NAS514P832-4 | NAS MACHINE SCREWS | 25 | ||||
| 9575D-B-D832-4 | Amatom Electronic Hardware | 23 | ||||
| M83248/1-262 | Military Specifications | 20 | ||||
| CFHC-832-4 | PennEngineering (PEM) | 14 | ||||
| M83248/1-123 | Military Specifications | 13 | ||||
| M83248/2-018 | Military Specifications | 6 | ||||
| NAS1832-4-8 | Witten Company Inc | 4 | ||||
| M83248/1-148 | Military Specifications | 3 | ||||
| NAS514P832-4 | Crescent Manufacturing | 2 | ||||
| 8324-1032-A-24 | RAF Electronic Hardware | 2 | ||||
![]() Onlinecomponents.com | 8324 | HH Smith | Aluminum Round Standoff - 4-40 Thread - 1/4" OD - 5/8" Length. RoHS : Compliant |
| 308 | |
| 8324-1032-SS | RAF Electronic Hardware | Non-folding Handles Internal Thread, Stainless Steel RoHS : Compliant |
| 150 | ||
| 8324 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 8324S | Thomas & Betts | Ever-Lok Clamp Type Connector 30-50 Amp - 3/4 inch Max. Cable Rating. RoHS : Compliant |
| 0 | ||
| 39537-8324 | Molex | 5.08MM EURO PLUG VERT ME FWE GRN 10AV 24 RoHS : Compliant |
| 0 | ||
| 8324-TB | Thomas & Betts | Set Screw 1 Inch Coupling - Steel. RoHS : Compliant |
| 0 | ||
| 39533-8324 | Molex | 5.08MM EURO PLUG VERT FWE GRN 10AV 24CKT RoHS : Compliant |
| 0 | ||
| 39543-8324 | Molex | 5.0MM EUROBLOCK PC 45 BLK 11A 24CKT RoHS : Compliant |
| 0 | ||
| 39523-8324 | Molex | 5.0MM EURO PLUG VERT FWE GRN 10AV 24CKT RoHS : Compliant |
| 0 | ||
| C115288-8324 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 39593-8324 | Molex | 5.0MM EUROBLOCK PC 45 GRN 11A 24CKT RoHS : Compliant |
| 0 | ||
| XN-4004-8324-6 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 060-8324-01-03 | Honeywell Test and Measurement | BL173DP,2J,6I,9X MODEL 73 RoHS : Compliant |
| 0 | ||
| 060-8324-06-01 | Honeywell Test and Measurement | MODEL 73, 4,200 LBS RoHS : Compliant |
| 0 | ||
| T0-2-8324/E | Eaton Cutler-Hammer | ON-OFF-SWITCHES E (UK) RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BGS8324Z![]() | NXP Semiconductors | Narrow Band Low Power Amplifier RoHS : Compliant |
| 18,200 | |
| LV8324CGR2G | onsemi | 24 V Single-Phase BLDC Motor Driver RoHS : Compliant |
| 25,985 | ||
AD8324ACP-REEL7![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver RoHS : Not Compliant |
| 8,736 | ||
AD8324ACPZ![]() | Analog Devices Inc | Video Processor Driver Consumer Video 20-QFN Tray RoHS : Compliant |
| 5,465 | ||
| ADM8324WCA46ARJZR7 | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 8 Channel, PDSO5 RoHS : Compliant |
| 15,319 | ||
AD8324ACPZ-REEL7![]() | Analog Devices Inc | Video Processor Driver Consumer Video 20-QFN T/R RoHS : Compliant |
| 3,492 | ||
| ADM8324WCA29ARJZR7 | Analog Devices Inc | Supervisory Circuit 2.93V SOT-23-5 T/R RoHS : Compliant |
| 3,380 | ||
AD8324JRQ![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Not Compliant |
| 21,668 | ||
AD8324JRQZ-REEL7![]() | Analog Devices Inc | Video Processor Driver Consumer Video 20-SOP T/R RoHS : Compliant |
| 3,295 | ||
AD8324JRQ-REEL7![]() | Analog Devices Inc | 3.3 V Upstream Cable Line Driver RoHS : Not Compliant |
| 16,413 | ||
CY28324PVC![]() | Cypress Semiconductor | Processor Specific Clock Generator, 200.4MHz, CMOS, PDSO48 RoHS : Not Compliant |
| 2,979 | ||
CY28324PVCT![]() | Cypress Semiconductor | Processor Specific Clock Generator, 200.4MHz, CMOS, PDSO48 |
| 3,000 | ||
| M83242G13 | Freescale Semiconductor | M83242G13 - C1K 450MHz RoHS : Compliant |
| 180 | ||
ISL8324IB![]() | Intersil Corporation | SPST, 2 Func, 1 Channel, CMOS, PDSO8 RoHS : Not Compliant |
| 1,886 | ||
| PM8324-FEI | Microchip Technology Inc | PM8324 - TEMAP 84FDL High Density T1/E1 Framer with Integrated VT/TU Mappers and M13 Muxes, TSE-120 |
| 180 | ||
![]() Sager | 8324 | Keystone Electronics Corp | LED Mounting Hardware .35 T1 3/4 BI-LEAD .197 (5mm) DIA RoHS : Compliant |
| 0 | |
| EM278324 | Eaton Bussmann | Fixed Terminal Blocks 24P EM2783 Series |
| 0 | ||
| IEGH666-1REC4-28324-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 832-40-021-10-052000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER |
| 0 | ||
| 832-40-023-30-052000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER |
| 0 | ||
| 832-40-030-30-052000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER |
| 0 | ||
| 832-40-052-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 832-40-054-30-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 832-40-087-10-052000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER |
| 0 | ||
| 832-40-089-30-052000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER |
| 0 | ||
| 8-324581-2 | TE Connectivity | Terminals TERMI-PG SPD FLG 12-10 6 RoHS : Compliant | 0 | |||
| 0878324415 | Molex | MGRID HDR SHRD SMT/CAP T&R .76AULF 44CKT |
| 0 | ||
| 0878324460 | Molex | MGRID HDR SHRD SMT W/PGS .05AULF 44CKT RoHS : Compliant |
| 0 | ||
| 0878324622 | Molex | MGRID HDR SHRD SMT/SLOT/CAP.38AULF 46CKT |
| 0 | ||
| 229-3-7583-24 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
![]() TME | 83241220 | Crouzet | Microswitch SNAP ACTION; OFF-(ON),ON-(OFF); IP67; -50÷85°C |
| 16 | |
| FMHT0-83240 | Stanley Black & Decker Inc | Clamp; universal; polyamide; max.600mm; Size: XL; FATMAX® |
| 2 | ||
| FMHT0-83241 | Stanley Black & Decker Inc | Clamp; universal; polyamide; max.900mm; Size: XL; FATMAX® |
| 2 | ||
| 48324330.HMT2 | Bopla | Enclosure: desktop; BoVersa; X: 120mm; Y: 216mm; Z: 55mm; white |
| 2 | ||
| 48324350.HMT2 | Bopla | Enclosure: desktop; BoVersa; X: 120mm; Y: 216mm; Z: 55mm; black |
| 1 | ||
| 8324 | Keystone Electronics Corp | Spacer sleeve; LED; Øout: 5mm; ØLED: 5mm; L: 8.9mm; natural; UL94V-2 RoHS : Compliant |
| 0 | ||
83240030![]() | Crouzet | Microswitch SNAP ACTION; 6A/250VAC; without lever; Pos: 2; IP40 |
| 0 | ||
| 8000078324 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; socket; male; OMNIMATE; 1kV RoHS : Compliant |
| 0 | ||
| 08-324 | NEO TOOLS | Socket: 12-angles; socket spanner; 30mm; 3/4" |
| 0 | ||
| 1832413 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON M; 12A; 1kV RoHS : Compliant |
| 0 | ||
| 578324 | Festo | Push-in fitting; straight; -0.95÷20bar; nickel plated brass |
| 0 | ||
| 83240024 | Crouzet | Microswitch SNAP ACTION; 6A/250VAC; with lever (with roller) |
| 0 | ||
| 1832454 | Phoenix Contact | Connector: PCB terminal block; 32A; 320V; PIN: 12; screw terminal RoHS : Compliant |
| 0 | ||
| 12832 4 000 1000 | RECA | Screw; M2; M2x4; Head: button; Phillips; PH1; A4 stainless steel |
| 0 | ||
| 2783240000 | Weidmüller Interface GmbH & Co. KG | Fuse: fuse; 10x38mm; 12A; 1kV; gPV; silver plated RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | UPD78324LPA211 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 1,654 | ||
| M12L128324A6BG2E | Elite Semiconductor Memory Technology Inc | Synchronous DRAM, 4MX32, 5.5ns, CMOS, PBGA90 RoHS : Compliant | 1,330 | |||
| 878324415 | Molex | RECT CONN Header Male Pin Surface Mount 44 POS 2mm Solder Gold Tube RoHS : Compliant | 1,000 | |||
IRFH8324TR2PBF![]() | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 23A I(D), 30V, 0.0041ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 400 | |||
| UPD78324LPA217 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 231 | |||
| BFC280832409 | Vishay Intertechnologies | FILM DIELECTRIC TRIMMER CAPACITOR Variable Capacitor, Polypropylene, 150V, 5.5pF Min, 40pF Max RoHS : Compliant | 228 | |||
![]() Interstate Connecting Components | MS25183-24-3PZ | Amphenol Aerospace | 5015 Plug 5#16 2#12 PIN | 0 | ||
| MS25183-24-6S | Amphenol Aerospace | 5015 Plug 8#12 SKT | 0 | |||
| 10-183240-014 | Amphenol Industrial Operations | CAP | 0 | |||
| FRVE96EM1610PX83245505 | ITT Interconnect Solutions | FRVE96EM16-10PX-832455-05 | 0 | |||
| 86094328324755V1LF | Amphenol FCi | 86094328324755V1LF-DIN C2 STR RoHS : Compliant | 0 | |||
| MS25183-24-17PX | Amphenol Aerospace | 5015 Plug 3#16 2#12 PIN | 0 | |||
| MS25183-24-2PZ | Amphenol Aerospace | 5015 Plug 7#12 PIN | 0 | |||
| M24308/8-324F | Amphenol Positronic | D-SUB PLUG 9 #20 PIN CRIMP |
| 0 | ||
| M39029/48-324 | Amphenol Aerospace | 22992 CLASS L PIN | 0 | |||
| 10208324-00 | TE Connectivity |
| 0 | |||
| FRVE96EM1610SX8324550+ | ITT Interconnect Solutions | FRVE96EM16-10SX-832455-06-CN | 0 | |||
| 97-283-24 | Amphenol Industrial Operations | (290) DEVIATION ADAPTER KIT | 0 | |||
| 1338324-1 | TE Connectivity | GUIDE |
| 0 | ||
| MS25183-24-11PX | Amphenol Aerospace | 5015 Plug 6#12 3#8 PIN | 0 | |||
| MS25183-24-16SZ | Amphenol Aerospace | 5015 Plug 3#16 3#12 1#8 SKT | 0 | |||
![]() PEI Genesis | 556-1508-324F | Dialight | RoHS : Compliant |
| 0 | |
| 1832-4-B7-WM250 | HellermannTyton |
| 0 | |||
| M39029/48-324 | Amphenol Corporation |
| 0 | |||
| 97-283-24 | Amphenol Corporation |
| 0 | |||
| 12934383-2424 | SOURIAU-SUNBANK |
| 0 | |||
| 1832-4-H-WM250 | HellermannTyton |
| 0 | |||
| C08-324N | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| M85049/83-24Z03 | Amphenol PCD |
| 0 | |||
| S983-2412-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
| 1832-4-H-W8 | HellermannTyton |
| 0 | |||
| S832-4 | SOURIAU-SUNBANK |
| 0 | |||
| 1832-4-G-WM250 | HellermannTyton |
| 0 | |||
| S983-2412-1.50-4 | SOURIAU-SUNBANK |
| 0 | |||
| S983-2420-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
| 556-3508-324F | Dialight | RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 282832-4 | TE Connectivity | TERMI-BLOK PIN HEAD 180 4P. 5 RoHS : Compliant |
| 2,376 | |
| 8-324225-1 | TE Connectivity | Terminals RoHS : Compliant |
| 1,317 | ||
| 8-32448-1 | TE Connectivity | Terminals RoHS : Compliant |
| 1,069 | ||
| 8-324608-1 | TE Connectivity | Terminals RoHS : Compliant |
| 726 | ||
| 350832-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 521 | ||
| 8-324169-1 | TE Connectivity | Terminals RoHS : Compliant |
| 244 | ||
| 8-324015-2 | TE Connectivity | Terminals RoHS : Compliant |
| 132 | ||
| 2342832-4 | TE Connectivity | Switches RoHS : Compliant |
| 51 | ||
| 86094328324755V1LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 32 | ||
| M85049/83-24Z02 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 25 | ||
| 832441317 | Winchester Interconnect | Nano Dual Row, Female SMV, Size 25 |
| 24 | ||
| 3-1718324-1 | TE Connectivity | Connectors RoHS : Compliant |
| 22 | ||
| M85049/83-24Z03 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 17 | ||
| 832431217 | Winchester Interconnect | Nano Dual Row, Female SMH, Size 21 |
| 4 | ||
| 1-1718324-1 | TE Connectivity | Connectors RoHS : Compliant |
| 3 | ||
![]() Richardson RFPD | R948324600 | Radiall | Non-RF Cable Assy RoHS : Compliant | 0 | ||
| R574832400 | Radiall | RF Switch SP4T 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | ||
| R574832405 | Radiall | RF Switch SP4T 0MHz to 40GHz RoHS : Not Compliant | 0 | |||
| 935146832410-W0T | Murata Manufacturing Co Ltd | Cap Silicon 0.001uF 60ppm/C 15% Wire Bond 0101 150 RoHS : Compliant | 0 | |||
| 935154832410-W0T | Murata Manufacturing Co Ltd | Cap Silicon 0.001uF 60ppm/°C 15% Wire Bond 0101 15 RoHS : Compliant | 0 | |||
| SI5345B-D08324-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| R574832420 | Radiall | RF Switch SP4T 0MHz to 40GHz 50dB RoHS : Compliant |
| 0 | ||
| SI5345B-D08324-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| ADM8324WAH29ARJZR7 | Analog Devices Inc | Processor Supervisor 2.93V 1 Active Low/Open Drain RoHS : Compliant |
| 0 | ||
| RBT83243XXOO | Powerex Power Semiconductors | General Purpose Rectifier Diode RoHS : Not Compliant | 0 | |||
| R574832425 | Radiall | SP4T Terminated Ramses SMA2.9 40GHz Latching Indic RoHS : Compliant |
| 0 | ||
| R585483240 | Radiall | RF Switch SPDT 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
| 108324-HMC481ST89 | Analog Devices Inc | HMC481ST89/HMC481ST89E CATV Amplifier Evaluation B RoHS : Compliant | 0 | |||
| R585832410 | Radiall | SP2Z R 2,9 L 12 C+ ELP RoHS : Compliant |
| 0 | ||
![]() Rutronik | 86093488324H55V1LF | Amphenol Communications Solutions | 48P DIN 41612 Male H 3.50mm RoHS : Compliant |
| 288 | |
![]() Chip 1 Exchange | ACD-183244-01 | Samtec Inc | INSTOCK | 13,325 | ||
| 87832-4220 | Molex | INSTOCK RoHS : Compliant | 12,454 | |||
| 87832-4420 | Molex | INSTOCK RoHS : Compliant | 7,644 | |||
| 1-1718324-1 | TE Connectivity | INSTOCK RoHS : Compliant | 7,026 | |||
| 7183-2413 | INSTOCK | 3,460 | ||||
| 87832-4221 | Molex | INSTOCK RoHS : Compliant | 3,074 | |||
| 7183-2416 | INSTOCK | 2,031 | ||||
| ACF451832-471-T9990 | INSTOCK | 1,000 | ||||
| ACF451832471T | TDK Corporation | INSTOCK | 956 | |||
| 74438324100- | Wurth Elektronik | INSTOCK | 573 | |||
| 222280832409 | INSTOCK | 130 | ||||
| 1832426- | Phoenix Contact | INSTOCK | 19 | |||
| 3-1718324-1 | TE Connectivity | INSTOCK RoHS : Compliant | 12 | |||
| M83241G-13 | Mindspeed Technologies Inc | INSTOCK | 2 | |||
| M83248/2-237 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 1-1718324-1 | TE Connectivity | Automotive Connector Housing LEAVYSEAL Plug 62 Ways AMP MCP 28 15K Series Pin Contacts (Alt: 1-1718324-1) RoHS : Compliant | 3,680 | ||
| 2-1718324-1 | TE Connectivity | Automotive Connector Housing LEAVYSEAL Plug 62 Ways AMP LEAVYSEAL Series Automotive Contacts (Alt: 2-1718324-1) RoHS : Compliant | 320 | |||
| 1832413 | Phoenix Contact | GMVSTBW 25 2ST762 GMVSTBW252ST762 (Alt: 1832413) RoHS : Compliant | 0 | |||
| 1708324 | Phoenix Contact | MSTB 25 2ST508 CP2 BD12 MSTB252ST508CP2BD12 (Alt: 1708324) RoHS : Compliant | 0 | |||
| 1832454 | Phoenix Contact | FRONT 4H63512 FRONT4H63512 (Alt: 1832454) RoHS : Compliant | 0 | |||
| 878324620 | Molex | Conn Shrouded Header HDR 46 POS 2mm Solder ST SMD Tube (Alt: 878324620) RoHS : Compliant | 0 | |||
| 878324620 | Molex | Conn Shrouded Header HDR 46 POS 2mm Solder ST SMD Tube (Alt: 878324620) RoHS : Compliant | 0 | |||
| S41X083241JP | CTS Corporation | Fixed Network Resistor 240 ohm Isolated 4 Resistors 0402 1005 Metric Convex 5 50 V - Tape and Reel (Alt: S41X083241JP) RoHS : Compliant | 0 | |||
| BFC280832409 | Vishay Intertechnologies | (Alt: BFC280832409) RoHS : Compliant | 0 | |||
| 742C0832402FP | CTS Corporation | Fixed Network Resistor 24 kohm Isolated 4 Resistors 0603 1608 Metric Concave 1 50 V - Tape and Reel (Alt: 742C0832402FP) RoHS : Compliant | 0 | |||
| EA4328324H55000E | Amphenol Corporation | (Alt: EA4328324H55000E) RoHS : Not Compliant | 0 | |||
| MKP383247200JFP2B0 | Vishay Intertechnologies | Power Film Capacitor Double Metallized PP Radial Box 2 Pin 4700 pF 5 Through Hole 700 V (Alt: MKP383247200JFP2B0) RoHS : Compliant | 0 | |||
| 86094328324755V1LF | Amphenol Corporation | Conn DIN 41612 RCP 32 POS 254mm Solder ST ThruHole Tray (Alt: 86094328324755V1LF) RoHS : Compliant | 0 | |||
| 416-83-244-41-006101 | PRECI-DIP SSA | Interconnect socket strip double row (Alt: 416-83-244-41-006101) RoHS : Compliant | 0 | |||
| 416-83-240-41-001101 | PRECI-DIP SSA | Conn Socket Strip SKT 40 POS 254mm Solder ST ThruHole (Alt: 416-83-240-41-001101) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 935154832410-E1T | Murata Manufacturing Co Ltd | (Alt: 935154832410-E1T) RoHS : Compliant | 0 | ||
| 935146832410-W0T | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 1000 pF, 30 V, 0201 [0603 Metric], ? 15%, WLSC Series, 0.6 mm (Alt: 935146832410-W0T) RoHS : Compliant | 0 | |||
| 935154832410-W0T | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 1000 pF, 30 V, 0201 [0603 Metric], ? 15%, UWSC Series, 0.6 mm (Alt: 935154832410-W0T) RoHS : Compliant | 0 | |||
| 5747832-4 | TE Connectivity | (Alt: 5747832-4) RoHS : Compliant | 0 | |||
| 935154832410-F2T | Murata Manufacturing Co Ltd | (Alt: 935154832410-F2T) RoHS : Compliant | 0 | |||
| 1-2040832-4 | TE Connectivity | (Alt: 1-2040832-4) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BGS8324Z![]() | NXP Semiconductors | WLAN Low Noise Amplifier and Switch 24 GHz to 25 GHz 40 C to 85 C 12 Pins HX2QFN (Alt: BGS8324Z) RoHS : Compliant | 0 | ||
| PIC16F18324-E/P | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin PDIP Tube (Alt: PIC16F18324-E/P) RoHS : Compliant | 0 | |||
| PIC16F18324-E/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin SOIC Tube (Alt: PIC16F18324-E/SL) RoHS : Compliant | 0 | |||
| PIC16F18324-E/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin TSSOP Tube (Alt: PIC16F18324-E/ST) RoHS : Compliant | 0 | |||
| PIC16F18324-I/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin TSSOP Tube (Alt: PIC16F18324-I/ST) RoHS : Compliant | 0 | |||
MCP73832-4ADI/MC![]() | Microchip Technology Inc | Charge Controller LiIonLiPol 15mA to 500mA 44V 8Pin DFN EP (Alt: MCP73832-4ADI/MC) RoHS : Compliant | 0 | |||
| PIC16F18324-I/SS | Microchip Technology Inc | (Alt: PIC16F18324-I/SS) RoHS : Compliant | 0 | |||
| PIC16LF18324-I/JQ | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 16Pin UQFN EP Tube (Alt: PIC16LF18324-I/JQ) RoHS : Compliant | 0 | |||
| RAA2128324GSP#HA0 | Renesas Electronics Corporation | (Alt: RAA2128324GSP#HA0) RoHS : Compliant | 0 | |||
| PIC16F18324T-I/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin SOIC TR (Alt: PIC16F18324T-I/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324-I/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin TSSOP Tube (Alt: PIC16LF18324-I/ST) RoHS : Compliant | 0 | |||
| PIC16LF18324-E/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin SOIC Tube (Alt: PIC16LF18324-E/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324T-I/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin SOIC TR (Alt: PIC16LF18324T-I/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324T-I/ST | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16LF183xx Series Microcontrollers PIC16 32 MHz 7 KB 14 Pins TSSOP (Alt: PIC16LF18324T-I/ST) RoHS : Compliant | 0 | |||
| C18324_ADELIA-110-ADAPTER-B | LEDIL | Basepart for ADELIA Reflector 54mm X 05mm Box (Alt: C18324_ADELIA-110-ADAPTER-B) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 74438324022 | Wurth Elektronik | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,994 | |
| 87088-3248 | Molex | IN STOCK SHIP TODAY | 1,353 | |||
| 38324 | Monoprice | IN STOCK SHIP TODAY |
| 83 | ||
| 05400783248 | 3M | IN STOCK SHIP TODAY |
| 48 | ||
| 20832-464 | nVent Schroff | IN STOCK SHIP TODAY |
| 26 | ||
| ACF451832-472-TD01 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 23 | ||
| 87832-4420 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 83-24-225-03 | Sola/Hevi-Duty | IN STOCK SHIP TODAY |
| 1 | ||
| 83240D3 | Maxtor | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | FHS-832-4 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 47,218 | |
| FH4-832-4 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 8,688 | ||
| CFHC-832-4 | PennEngineering (PEM) | These studs ensure permanent mounting in metal sheets as thin as .062 in.The fastener head is locked securely in a blind milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to |
| 5,333 | ||
| SO-832-4ZI | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.PEM� brand thru-hole threaded standoffs are installed with their heads flush with one surf |
| 3,354 | ||
| D8-324-100-040 | Southco |
| 1,958 | |||
| SO4-832-4 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .040.If yo |
| 1,325 | ||
| D8-324-201-200 | Southco |
| 115 | |||
| STKB-832-4 | Standard Insert | Uniform knurl diameter reduces the risk of sink marks.Available in varying lengths for injection molding assemblies.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative. |
| 8 | ||
| CSOS-832-4 | PennEngineering (PEM) | These standoffs ensure permanent mounting in metal sheets as thin as .062 in.The fastener head is locked securely in a blind milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installatio | 0 | |||
| FHL-832-4ZI | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| 8324-1032-SS | RAF Electronic Hardware | OVAL NON-FOLDING HANDLE WITH INTERNAL THREADS | 0 | |||
| 88324 | Pop Rivets | TLPD650SS 002 S5C | 0 | |||
| CFHA-832-4 | PennEngineering (PEM) | These studs ensure permanent mounting in metal sheets as thin as .062 in.The fastener head is locked securely in a blind milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to | 0 | |||
| 48324 | Essentra Components | 0 | ||||
| 47-83-242-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | PIC16F18324T-I/JQ | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 16Pin UQFN EP TR (Alt: PIC16F18324T-I/JQ) RoHS : Compliant | 16,500 | ||
| IRFH8324TRPBF | Infineon Technologies AG | Trans MOSFET NCH 30V 23A 8Pin PQFN EP TR (Alt: SP001556492) RoHS : Compliant | 8,000 | |||
| PIC16F18324-E/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin SOIC Tube (Alt: PIC16F18324-E/SL) RoHS : Compliant | 0 | |||
| PIC16F18324-E/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin TSSOP Tube (Alt: PIC16F18324-E/ST) RoHS : Compliant | 0 | |||
MCP73832-4ADI/MC![]() | Microchip Technology Inc | Charge Controller LiIonLiPol 15mA to 500mA 44V 8Pin DFN EP (Alt: MCP73832-4ADI/MC) RoHS : Compliant | 0 | |||
| PIC16F18324-E/JQ | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 16Pin UQFN EP Tube (Alt: PIC16F18324-E/JQ) RoHS : Compliant | 0 | |||
| PIC16LF18324-I/JQ | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 16Pin UQFN EP Tube (Alt: PIC16LF18324-I/JQ) RoHS : Compliant | 0 | |||
| PIC16F18324T-I/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin SOIC TR (Alt: PIC16F18324T-I/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324-I/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin TSSOP Tube (Alt: PIC16LF18324-I/ST) RoHS : Compliant | 0 | |||
| PIC16LF18324-E/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin SOIC Tube (Alt: PIC16LF18324-E/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324-I/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin SOIC Tube (Alt: PIC16LF18324-I/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324T-I/SL | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V 14Pin SOIC TR (Alt: PIC16LF18324T-I/SL) RoHS : Compliant | 0 | |||
| PIC16LF18324T-I/ST | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16LF183xx Series Microcontrollers PIC16 32 MHz 7 KB 14 Pins TSSOP (Alt: PIC16LF18324T-I/ST) RoHS : Compliant | 0 | |||
| PIC16F18324T-E/JQVAO | Microchip Technology Inc | MCU 8Bit PIC RISC 7KB Flash 5V 16Pin UQFN TR (Alt: PIC16F18324T-E/JQVAO) RoHS : Compliant | 0 | |||
| C18324_ADELIA-110-ADAPTER-B | LEDIL | Basepart for ADELIA Reflector 54mm X 05mm Box (Alt: C18324_ADELIA-110-ADAPTER-B) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 88083-24-61PW | TE Connectivity | Connector 26482 |
| 100 | |
| 88083-24-61PW-LC | TE Connectivity | Connector 26482 | 79 | |||
| 88083-24-61PX | TE Connectivity | Connector 26482 |
| 79 | ||
| 88083-24-61PZ-LC | TE Connectivity | Connector 26482 |
| 79 | ||
| 88083-24-61PY-LC | TE Connectivity | Connector 26482 |
| 79 | ||
| 88083-24-31SY | TE Connectivity | Connector 26482 |
| 6 | ||
| 88083-24-31SY-LC | TE Connectivity | Connector 26482 |
| 6 | ||
| 88083-24-31SN | TE Connectivity | Connector 26482 |
| 6 | ||
| M85528/3-24-01 | Glenair Inc | Connector Acc |
| 1 | ||
| M85049/83-24Z03 | Glenair Inc | Connector | 0 | |||
| 83778324 | Crouzet | Switches | 0 | |||
| M85528/3-24 | Glenair Inc | Connector | 0 | |||
| MS27783-24M | Safran Electrical & Power UK | Switches | 0 | |||
| M85049/83-24P03 | Glenair Inc | Connector | 0 | |||
| M85049/83-24P03 | Amphenol PCD | Connector Acc |
| 0 | ||
![]() Flip Electronics | M83241G13 | NXP Semiconductors | Stock, Ship Today |
| 907 | |
| M83240G13 | NXP Semiconductors | Stock, Ship Today |
| 281 | ||
![]() Master Electronics | 8324 | HH Smith | Aluminum Round Standoff - 4-40 Thread - 1/4 OD - 5/8 Length. RoHS : Compliant |
| 308 | |
| IEGH666-1REC4-28324-2 | Sensata Circuit Breakers | Circuit Breakers RoHS : Compliant |
| 0 | ||
| ZPF000000000008324 | TE Connectivity | 983-6R 12-03 S8 L MOQ Reduction RoHS : Compliant |
| 0 | ||
| C115288-8324 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 1832413 | Phoenix Contact | PCB connector - nominal current: 12 A - rated voltage (III/2): 630 V - nominal cross section: 2.5 mm² - number of positions: 2 - pitch: 7.62 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 019928324 | TE Connectivity | ABB-CONNECTION - ADO SERIES IDC TERMINAL BLOCKS RoHS : Compliant |
| 0 | ||
| 86094328324755V1LF | Amphenol FCi | DIN 41612 Connector - Receptacle - Female Sockets - 48 Position - 3 Rows - 0.100 Pitch - Style C/2 - Class 2 - Solder Termination - Through Hole. RoHS : Compliant |
| 0 | ||
| 10208324-00 | TE Connectivity | PT8510-0025-121-1140 RoHS : Compliant |
| 0 | ||
| ARC6-08-32.4-LU-LU-3-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PIC16F18324-E/SL | Microchip Technology Inc | MCU 8-bit PIC RISC 7KB Flash 2.5V/3.3V Automotive 14-Pin SOIC N Tube RoHS : Compliant |
| 0 | ||
| 1338324-1 | TE Connectivity | GUIDE RoHS : Not Compliant |
| 0 | ||
| 83241220 | Crouzet | Switch Snap Action N.O./N.C. SPDT Overtravel Plunger Screw 0.1A 30VAC 30VDC 4.5N Screw Mount RoHS : Compliant |
| 0 | ||
| C115368-3241 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| FRVE96EM16-10PW-832455-03 | ITT Interconnect Solutions | FRVE96EM16-10PW-832455-03 RoHS : Compliant |
| 0 | ||
| FW-12-05-L-D-248-324 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 8000078324 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks MHS 7S/05 W T3 B T RoHS : Compliant |
| 50 | |
| 8324610000 | Weidmüller Interface GmbH & Co. KG | Solid State Relays - SSRs MCZ O 24VDC RoHS : Compliant |
| 50 | ||
| 1883242 | Phoenix Contact | Pluggable Terminal Blocks TERM BLOCK PLUG 12POS 7.50MM RoHS : Compliant |
| 46 | ||
| 83240213 | Crouzet | Basic / Snap Action Switches PBX4N IP67 1/4"90DEG QC + LVR |
| 22 | ||
| 83240024 | Crouzet | Basic / Snap Action Switches Switch DPST-NO/NC Panel Mount |
| 7 | ||
| 83240224 | Crouzet | Basic / Snap Action Switches PBX 4N IP67 SCREW + LVR+MTG PLATE |
| 6 | ||
| 83244200 | Crouzet | Basic / Snap Action Switches Microswitch, Special, PBX-8324 Series, 83244 IP67 W3 |
| 5 | ||
| 1832455 | Phoenix Contact | Pluggable Terminal Blocks GMVSTBW25/6-ST-762 RoHS : Compliant |
| 4 | ||
| 83240000 | Crouzet | Basic / Snap Action Switches PBX 4N IP40 1/4" QC |
| 2 | ||
| JP-7505-83-24-2 | Mueller Electric Company | Test Leads Red Shrouded Banana Plug to Insulation Piercing Clip - Silicone |
| 2 | ||
83240030![]() | Crouzet | Basic / Snap Action Switches PBX 4N IP40 SCREW + PROT COVER |
| 0 | ||
| 83240203 | Crouzet | Basic / Snap Action Switches PBX 4N IP67 1/4 QC + LVR |
| 0 | ||
| 83241220 | Crouzet | Basic / Snap Action Switches PBX 4N IP67 0.1A SCW |
| 0 | ||
| 83240005 | Crouzet | Basic / Snap Action Switches PBX 4N IP40 1/4"QC + LVR+MTG PLAT W/NOTC |
| 0 | ||
| 71883-2-4053 | ebm-papst | Fan Accessories 1.72 Q-MOT MTG.BRKT |
| 0 | ||
![]() Pasternack Enterprises US | PE34683-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Mini SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm Mini SMB Plug to 75 Ohm Mini SMB Plug Cable 24 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm mini SMB plug to 75 Ohm mini SMB plug cable 24 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm mini SMB plug to 75 Ohm mini SMB plug cable 24 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to mini SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMB cable connection on one end and mini SMB cable connection on the other. Our mini SMB to mini SMB cable assemblies have a plug gender on end 1 and plug on end 2. This mini SMB to mini SMB cable is a plug to plug coax assembly, PE34683-24, can also be known as a mini SMB male to mini SMB male cable assembly and will be shipped same-day as it is purchased. Mini SMB male to mini SMB male cable assembly PE34683-24 is built with RG179 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with mini SMB to mini SMB cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency mini SMB plug to mini SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Mini SMB male to mini SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to mini SMB cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug to 75 Ohm mini SMB plug cable 24 inch length using 75 Ohm RG179 coax. |
| 486 | |
| PE35283-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Cable 24 Inch Length Using RG8 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG8 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG8 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE35283-24, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE35283-24 is built with RG8 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG8 coax. |
| 181 | ||
| PE3W16883-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated SMA Male to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated SMA male to SMA male right angle low loss cable 24 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male to SMA male right angle low loss cable 24 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3W16883-24 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16883-24 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W16883-24 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16883-24 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 98 | ||
| PE3083-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 24 inches. HN Male to HN Male Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly HN male to HN male cable 24 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. HN male to HN male cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE3083-24, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3083-24 is built with RG142 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable 24 inch length using RG142 coax. |
| 79 | ||
| PE3C6183-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 7/16 DIN Male Right Angle to 7/16 DIN Female Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connection on one end and TC-SPP250-716F-LP 7/16 DIN cable connection on the other. Our low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable is a male to female coax assembly, PE3C6183-24, can also be known as a low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly PE3C6183-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-RA-LP 7/16 DIN cable assembly is manufactured with right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle male to TC-SPP250-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6183-24 can also be used in the other direction and will be TC-SPP250-716F-LP 7/16 DIN female to right angle TC-SPP250-716M-RA-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-RA-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 10 | ||
| PE3C9832-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N male right angle to SMA male right angle low loss cable 48 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to SMA male right angle low loss cable 48 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle type N to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C9832-48 can also be known as a low loss right angle N type plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C9832-48 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9832-48 can also be used in the other direction and will be right angle SMA male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to SMA male right angle low loss cable 48 inch length using TCOM-240 coax with Times Microwave components. |
| 5 | ||
| PE3C6683-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly BNC female bulkhead to BNC male low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC female bulkhead to BNC male low loss cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC bulkhead cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a female gender on end 1 and male on end 2. PE3C6683-24 can also be known as a low loss BNC jack to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC plug cable assembly PE3C6683-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC female bulkhead to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6683-24 can also be used in the other direction and will be BNC male to BNC female bulkhead cable assembly if the opposite connectivity is required. Low loss BNC jack bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to BNC male low loss cable 24 inch length using LMR-195 coax. |
| 1 | ||
| PE3W07083-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Slide-On BMA Jack 2 Hole Flange to SMA Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Slide-on BMA jack 2 hole flange to SMA male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMA cable connection on the other. Our BMA to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W07083-24 can also be known as a BMA female to SMA plug cable assembly and will be shipped same-day as it is purchased. BMA female to SMA plug cable assembly PE3W07083-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07083-24 can also be used in the other direction and will be SMA male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMA male cable 24 inch length using PE-SR402FL coax. |
| 0 | ||
| PE3W11583-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to SMA Male Right Angle Low Loss Cable 24 Inch Length Using PE-C200 Coax., Radio frequency assembly TNC male to SMA male right angle low loss cable 24 inch length using PE-C200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 24 inch length using PE-C200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W11583-24 can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W11583-24 is built with PE-C200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11583-24 can also be used in the other direction and will be right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male right angle low loss cable 24 inch length using PE-C200 coax. |
| 0 | ||
| PE3C8324-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Right Angle Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to N male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a right angle type N cable connection on the other. Our low PIM 7/16 DIN to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8324-150CM can also be known as a low PIM 7/16 DIN plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8324-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to right angle type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8324-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8324-150CM can also be used in the other direction and will be a right angle type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7832-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.3-10 Male Right Angle to 4.3-10 Female Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male right angle to 4.3-10 female low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to 4.3-10 female low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7832-48, can also be known as a low PIM right angle 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7832-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7832-48 can also be used in the other direction and will be 4.3-10 female to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to 4.3-10 female low PIM cable 48 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8324-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a right angle type N cable connection on the other. Our low PIM 7/16 DIN to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8324-100CM can also be known as a low PIM 7/16 DIN plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8324-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to right angle type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8324-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8324-100CM can also be used in the other direction and will be a right angle type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W14983-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 4.3-10 Female Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 female low PIM cable 24 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 female low PIM cable 24 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a female on end 2. PE3W14983-24 can also be known as a low PIM 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W14983-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to 4.3-10 female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 jack cable assembly PE3W14983-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W14983-24 can also be used in the other direction and will be a 4.3-10 female to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE33383-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. TNC Male to BNC Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly TNC male to BNC male cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE33383-24, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE33383-24 is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33383-24 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 24 inch length using RG316 coax. |
| 0 | ||
| PE3C8324-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Right Angle Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to N male right angle low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N male right angle low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a right angle type N cable connection on the other. Our low PIM 7/16 DIN to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8324-12 can also be known as a low PIM 7/16 DIN plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8324-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to right angle type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8324-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8324-12 can also be used in the other direction and will be a right angle type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 8-324001-1 | TE Connectivity | SPLICE,SOLIS BUTT STRAP 24-20 Splice Type: Butt Splice Wire Size: 24 – 20 AWG Wire Size: .2 – .6 mm² Wire Size: 320 – 1290 CMA Insulation Option: Uninsulated Butt Splice 24 – 20 AWG .2 – .6 mm² 320 – 1290 CMA | Electrical Wire Splice | Part Number: 8-324001-1 | Internal Number: 8-324001-1 | TE Connectivity RoHS : Compliant |
| 2,000 | |
| 8-324015-2 | TE Connectivity | TERMINAL,PIDG SPD FLG 12-10 10 Spade Terminal Type: Spade Flange Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 3 – 6 mm² Wire Size: 5180 – 13100 CMA Stud Size: #10 Spade Flange Tongue Terminal 12 – 10 AWG 3 – 6 mm² 5180 – 13100 CMA | Pidg Flanged Spade Tongue Terminal | Part Number: 8-324015-2 | Internal Number: 8-324015-2 | TE Connectivity RoHS : Compliant |
| 1,371 | ||
| 8-324165-1 | TE Connectivity | TERMINAL,PG SPD FLG 16-14 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #6 M3.5 Spade Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Spade Terminal | Part Number: 8-324165-1 | Internal Number: 8-324165-1 | TE Connectivity RoHS : Compliant |
| 876 | ||
| 8-324075-1 | TE Connectivity | TERMINAL,PIDG R 26-22 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 26 – 22 AWG Wire Size: .129 – .326 mm² Wire Size: 202 – 810 CMA Stud Size: #10 Closed Ring Tongue Terminal 26 – 22 AWG .129 – .326 mm² 202 – 810 CMA | Pidg Ring Tongue Terminal | Part Number: 8-324075-1 | Internal Number: 8-324075-1 | TE Connectivity RoHS : Compliant |
| 732 | ||
| 8-324169-1 | TE Connectivity | PG SPD FLG 22-16COMM22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Spade Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Spade Terminal | Part Number: 8-324169-1 | Internal Number: 8-324169-1 | TE Connectivity RoHS : Compliant |
| 465 | ||
| 8-32446-1 | TE Connectivity | KN DISC,PIDG22-16COMM,22-18MIL Barrel Color: Red Body Plating Material: Tin Insulation Option: Partially Insulated Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Red Tin Partially Insulated 22 – 16 AWG | Pidg Knife Disconnect Splice | Part Number: 8-32446-1 | Internal Number: 8-32446-1 | TE Connectivity RoHS : Compliant |
| 349 | ||
| 8-32448-1 | TE Connectivity | KNIFE DISCONNECT,PIDG 16-14 Barrel Color: Blue Body Plating Material: Tin Insulation Option: Partially Insulated Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Blue Tin Partially Insulated 16 – 14 AWG | Pidg Knife Disconnect Splice | Part Number: 8-32448-1 | Internal Number: 8-32448-1 | TE Connectivity RoHS : Compliant |
| 105 | ||
| 2-1718324-1 | TE Connectivity | 1.5/2.8MM TAB HSG.,62POS.,SEALED Nominal Voltage Architecture: 12 V 24 V Number of Positions: 62 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 2.8 mm 1.6 mm Leavyseal Connector Housing | 12 V 62 Housing for Male Terminals | Part Number: 2-1718324-1 | Internal Number: 2-1718324-1 | 2.8 mm | TE Connectivity RoHS : Compliant |
| 53 | ||
| 1-1718324-1 | TE Connectivity | 1.5/2.8MM TAB HSG.,62POS.,ASSY Nominal Voltage Architecture: 24 V 12 V Number of Positions: 62 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 2.8 mm 1.6 mm Leavyseal Connector Housing | 24 V 62 Housing for Male Terminals | Part Number: 1-1718324-1 | Internal Number: 1-1718324-1 | 2.8 mm | TE Connectivity RoHS : Compliant |
| 47 | ||
| 8-324918-2 | TE Connectivity | TERMINAL,PIDG R 12-10 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 6.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: #10 Closed Ring Tongue Terminal 12 – 10 AWG 2.62 – 6.64 mm² 5180 – 13100 CMA | Pidg Ring Tongue Terminal | Part Number: 8-324918-2 | Internal Number: 8-324918-2 | Alias Number: A58188-000 | TE Connectivity RoHS : Compliant |
| 4 | ||
![]() Vyrian | BFC280832409 | Vishay Intertechnologies | Variable Capacitor, Polypropylene, 150V, 5.5pF Min, 40pF Max RoHS : Compliant | 11,525 | ||
AD8324ACPZ![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver RoHS : Compliant | 10,361 | |||
ADS8324EB/2K5![]() | Texas Instruments | ADC, Successive Approximation, 14-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 8,504 | |||
| LV8324CGR2G | onsemi | Brushless DC Motor Controller, PDSO14 RoHS : Compliant | 8,077 | |||
| PIC16F18324-E/P | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDIP14 RoHS : Compliant | 7,715 | |||
| M83240G13 | NXP Semiconductors | 7,550 | ||||
ADS8324EB![]() | Texas Instruments | ADC, Successive Approximation, 14-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 | 6,967 | |||
AD8324ACP-REEL7![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver RoHS : Not Compliant | 6,485 | |||
| 1832497 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,447 | |||
| 1832413 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,217 | |||
ADS8324EB/2K5G4![]() | Texas Instruments | ADC, Successive Approximation, 14-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 5,039 | |||
MCP73832-4ADI/MC![]() | Microchip Technology Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +4.4V, PDSO8 RoHS : Compliant | 4,844 | |||
ADS8324E/2K5G4![]() | Texas Instruments | ADC, Successive Approximation, 14-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 4,299 | |||
| 1-1718324-1 | TE Connectivity | Combination Line Connector, 62 Contact(s), Male RoHS : Compliant | 2,887 | |||
| 83240024 | Crouzet | Snap Acting/Limit Switch | 724 | |||
![]() Win Source Electronics | PIC16LF18324-I/ST | Microchip Technology Inc | IC MCU 8BIT 7KB FLASH 14TSSOP / PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 7KB (4K x 14) FLASH 14-TSSOP RoHS : Compliant |
| 27,250 | |
| 74438324022 | Wurth Elektronik | FIXED IND 2.2UH 1.6A 141MOHM SMD RoHS : Compliant |
| 15,000 | ||
| PIC16F18324-I/SL | Microchip Technology Inc | IC MCU 8BIT 7KB FLASH 14SOIC / MCU 8-bit PIC RISC 7KB Flash 2.5V/3.3V Automotive 14-Pin SOIC N Tube RoHS : Compliant |
| 12,306 | ||
| 74438324100 | Wurth Elektronik | FIXED IND 10UH 700MA 780MOHM SMD RoHS : Compliant |
| 9,000 | ||
| 74438324010 | Wurth Elektronik | FIXED IND 1UH 2.8A 60 MOHM SMD RoHS : Compliant |
| 9,000 | ||
| 74438324015 | Wurth Elektronik | FIXED IND 1.5UH 2.2A 99 MOHM SMD RoHS : Compliant |
| 3,350 | ||
AD8324ACPZ![]() | Analog Devices Inc | IC VIDEO LINE DRVR/TRANS 20LFCSP / Line Driver, Transmitter 20-LFCSP (4x4) RoHS : Compliant |
| 2,900 | ||
| AD8324ACPZ-REEL | Analog Devices Inc |
| 2,720 | |||
AD8324ACPZ-REEL7![]() | Analog Devices Inc | IC VIDEO LINE DRVR/TRANS 20LFCSP / Line Driver, Transmitter 20-LFCSP (4x4) RoHS : Compliant |
| 2,650 | ||
| PIC16F18324T-I/SL | Microchip Technology Inc | RoHS : Compliant |
| 2,337 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |