 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
8304 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | 8304 | Littelfuse Commercial Vehicle Products | NUT FACE 5/8-32 CHROMALLOY RoHS : Compliant |
| 400 | |
| 5747830-4 | TE Connectivity | 25 MSFL RCPT RA 590L(IN FM BL) RoHS : Compliant |
| 5 | ||
| 83.040.0000.1 | Wieland Electric GmbH | Ethernet Switch 6-Port 100Mbps RoHS : Compliant |
| 1 | ||
| 8304 | Thomas & Betts | Ever-Lok Female Receptacle Only with Flap Cover for FS; FD FSWS; FDWS And Similar Conduit Fittings - 50 Amp - 250V - 3 Pole 4 Wire. RoHS : Compliant |
| 0 | ||
| 0830425 | Phoenix Contact | Cable marker carrier - transparent - unlabeled - mounting type: Assembly with cable binders - cable diameter: ‰¥ 4 mm - lettering field size: 85 x 15 mm RoHS : Compliant |
| 0 | ||
| 1-655830-4 | TE Connectivity | ISOLATIONSCRIMPER RoHS : Not Compliant |
| 0 | ||
0830429 | Phoenix Contact | Warning label - Roll - yellow/black - unlabeled - can be labeled with: THERMOMARK ROLLMASTER 300/600 - THERMOMARK X1.2 - THERMOMARK ROLL X1 - THERMOMARK ROLL 2.0 - THERMOMARK ROLL - mounting type: adhesive - diameter: 0 mm - lettering field size: 25 x 25 mm - Number of individual labels: 500 RoHS : Compliant |
| 0 | ||
| 383040-000 | TE Connectivity | 44A0141-22-9/9/9/9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-655830-4 | TE Connectivity | ISOLATIONSCRIMPER RoHS : Not Compliant |
| 0 | ||
| 854830-4 | TE Connectivity | CRIMPER INSULATION SPECIAL.210 RoHS : Not Compliant |
| 0 | ||
| ABLS-9.8304MHZ-L4Q-T | Abracon Corporation | Crystal - 9.8304MHZ (+/-) 30ppm - 18pF - SMD LOW PROFILE - HC/49US (AT49) - -55°C to +125°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| 8304-0601000 | Belden Inc | The 8304 is a multi-pair shielded EIA RS-232 computer cable featuring 22 AWG stranded tinned copper conductors. RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-088-304 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DSC1001AE5-098.3040 | Microchip Technology Inc | MEMS OSC LVCMOS 98.304MHz 10PPM 1.8-3.3V -20 to 70C 7. RoHS : Compliant |
| 0 | ||
| NB3M8304CDR2G | onsemi | Fanout Buffer with LVCMOS/LVTTL Low Skew 3.3 V 200 MHz 1:4 RoHS : Compliant |
| 0 | ||
 Verical | 8304AMILF | Renesas Electronics Corporation | Clock Fanout Buffer 4-OUT 1-IN 1:4 8-Pin SOIC N Tube RoHS : Compliant |
| 702,183 | |
| 8304 | Abbatron | Standoff Hex M/M 8-32-THD Brass Nickel RoHS : Compliant |
| 2,447 | ||
| 83048-BLK-1000 | Belden Inc | 83048-BLK-1000 |
| 2,000 | ||
| 83046-WHT-1000 | Belden Inc | 83046-WHT-1000 |
| 1,000 | ||
| 83045-RED-1000 | Belden Inc | 83045-RED-1000 |
| 1,000 | ||
| 8304950001 | TE Connectivity | Cable Markers Printable RoHS : Compliant |
| 500 | ||
| 83049-BRN-100 | Belden Inc | 83049-BRN-100 |
| 82 | ||
| 83049-DK-GRN-100 | Belden Inc | 83049-DK-GRN-100 |
| 37 | ||
| 83048-BRN-100 | Belden Inc | 83048-BRN-100 |
| 20 | ||
| 83045-BLK-100 | Belden Inc | 83045-BLK-100 |
| 5 | ||
| 83045-WHT-100 | Belden Inc | 83045-WHT-100 |
| 4 | ||
| 83.040.0106.0 | Wieland Electric GmbH | Ethernet Switch 8-Port 1000Mbps |
| 3 | ||
| 83.040.0000.0 | Wieland Electric GmbH | Ethernet Switch 6-Port 100Mbps |
| 3 | ||
| 83049-LT-BLU-100 | Belden Inc | 83049-LT-BLU-100 |
| 2 | ||
| 8304-CHR-100 | Belden Inc | Computer Cable Tape Semi Rigid Polyvinyl Chloride 8Conductors 22AWG 8.12mm 300VAC Chrome 30.48m RoHS : Compliant |
| 1 | ||
 Avnet Americas | 253-9.8304M-20-S-TR | Abracon Corporation | - Tape and Reel (Alt: 253-9.8304M-20-S-TR) RoHS : Not Compliant | 10,000 | ||
| 61083-043402LF | Amphenol Corporation | - Tape and Reel (Alt: 61083-043402LF) RoHS : Compliant |
| 2,100 | ||
| FC7ASBBMD9.8304-T2 | Fox Electronics | - Tape and Reel (Alt: FC7ASBBMD9.8304-T2) RoHS : Compliant |
| 2,000 | ||
| FC4SDCBMF9.8304-T1 | Fox Electronics | - Tape and Reel (Alt: FC4SDCBMF9.8304-T1) RoHS : Compliant |
| 2,000 | ||
| 89898-304ALF | Amphenol Corporation | - Tape and Reel (Alt: 89898-304ALF) RoHS : Compliant |
| 1,950 | ||
| 61083-044402LF | Amphenol Corporation | - Tape and Reel (Alt: 61083-044402LF) RoHS : Compliant |
| 1,800 | ||
| 61083-041402LF | Amphenol Corporation | - Tape and Reel (Alt: 61083-041402LF) RoHS : Compliant |
| 900 | ||
| SIT5359AI-FRG25IT-98.304000X | SiTime Corporation | Temperature Compensated Crystal Oscillator (TCXO) 98.304MHz ?6.25ppm LVCMOS 10-Pin CSMD T/R - Tape and Reel (Alt: SIT5359AI-FRG25IT-98.304000X) RoHS : Compliant | 250 | |||
AB-9.8304MHZ-B2 | Abracon Corporation | - Tape and Reel (Alt: AB-9.8304MHZ-B2) RoHS : Compliant | 0 | |||
| 87568-3044 | Molex | - Trays (Alt: 0875683044) RoHS : Compliant |
| 0 | ||
| 656P98304I3T | CTS Corporation | - Tape and Reel (Alt: 656P98304I3T) RoHS : Compliant | 0 | |||
| 5747830-4 | TE Connectivity | - Rail/Tube (Alt: 5747830-4) RoHS : Compliant |
| 0 | ||
AX7MCF2-983.0400T | Abracon Corporation | - Tape and Reel (Alt: AX7MCF2-983.0400T) RoHS : Compliant | 0 | |||
| AX7MCF4-983.0400 | Abracon Corporation | Oscillator, 983.04 MHz, 25 ppm, SMD, 7mm x 5mm, 1.8 V, CML, AX7 - Product that comes on tape, but is not reeled (Alt: AX7MCF4-983.0400) RoHS : Compliant | 0 | |||
| FC4SDEBMF9.8304-T1 | Fox Electronics | - Tape and Reel (Alt: FC4SDEBMF9.8304-T1) RoHS : Compliant | 0 | |||
 Arrow Electronics | 8304 | Abbatron | Standoff Hex M/M 8-32-THD Brass Nickel RoHS : Compliant |
| 2,447 | |
 Newark | M20-7830446 | Harwin | Socket, Pcb, 0.1", 4+4Way; |Harwin M20-7830446 RoHS : Compliant |
| 8,440 | |
| 83047 0081000 | Belden Inc | Wire, Hook Up, Hi Temp, Ptfe, Gray; |Belden 83047 0081000 RoHS : Compliant |
| 5,000 | ||
| ABM7-9.8304MHZ-D2Y-T | Abracon Corporation | Crystal, 9.8304Mhz, 18Pf, 6Mm X 3.5Mm; |Abracon ABM7-9.8304MHZ-D2Y-T RoHS : Compliant |
| 1,008 | ||
| ABM7-9.8304MHZ-D2Y-T | Abracon Corporation | Crystal, 9.8304Mhz, 18Pf, 6Mm X 3.5Mm; |Abracon ABM7-9.8304MHZ-D2Y-T RoHS : Compliant |
| 1,008 | ||
| ABM7-9.8304MHZ-D2Y-T | Abracon Corporation | Crystal, 9.8304Mhz, 18Pf, 6Mm X 3.5Mm; |Abracon ABM7-9.8304MHZ-D2Y-T RoHS : Compliant |
| 1,000 | ||
| LT8304HS8E#PBF | Analog Devices Inc | Dc/Dc Conv, Flyback, 350Khz, 150Deg C; |Analog Devices, Inc. LT8304HS8E#PBF RoHS : Compliant |
| 612 | ||
| 61083-043400LF | Amphenol Communications Solutions | Mezzanine Conn, Plug, 40Pos, 2Row, 0.8Mm; Mezzanine Connector Type:Plug; Pitch Spacing:0.8Mm; No. Of Rows:2Rows; No. Of Contacts:40Contacts; Connector Mounting:Surface Mount Straight; Contact Material:Brass Rohs Compliant: Yes RoHS : Compliant |
| 555 | ||
| 7447783047 | Wurth Elektronik | Power Inductor, 4.7Uh, Shielded, 3.3A; |Würth Elektronik 7447783047 RoHS : Compliant |
| 215 | ||
| 7447783047 | Wurth Elektronik | Power Inductor, 4.7Uh, Shielded, 3.3A; |Würth Elektronik 7447783047 RoHS : Compliant |
| 215 | ||
| 556-1608-304F | Dialight | Led Panel Mnt Indicator Watertight Green; |Dialight 556-1608-304F RoHS : Compliant |
| 85 | ||
| FMCA2830-48 | Fairview Microwave Inc | 2.92Mm Male-2.92Mm Male Cbl Rg402 In 48"; |Fairview Microwave FMCA2830-48 RoHS : Not Compliant |
| 22 | ||
| 183045-01 | NI | Test Cable Assembly; |Ni/emerson 183045-01 RoHS : Compliant |
| 3 | ||
| AD8304-EVALZ | Analog Devices Inc | Evaluation Board, Logarithmic Amplifier; |Analog Devices, Inc. AD8304-EVALZ RoHS : Compliant |
| 3 | ||
| 8304 | Abbatron | Adptr 8304 Brs Hex Male Nkl#10; |Abbatron Hh Smith 8304 RoHS : Compliant |
| 0 | ||
| 8304 | Thomas & Betts | 30A 3P4W Rec Se 600Vac250Vdc; |Abb Thomas & Betts 8304 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | MAX98304EWL+T | Analog Devices Inc | Mono 3.2W Class D Amplifier RoHS : Compliant |
| 2,690,509 | |
| LT8304IS8E-1#TRPBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 27,500 | ||
| LT8304HS8E#TRPBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 17,500 | ||
| LT8304HS8E-1#TRPBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 10,000 | ||
| MAX98304EWL+ | Analog Devices Inc | Mono 3.2W Class D Amplifier RoHS : Compliant | 3,607 | |||
| LT8304IS8E#PBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 1,409 | ||
| LT8304IS8E-1#PBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 1,024 | ||
| LT8304ES8E-1#PBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 943 | ||
| LT8304HS8E-1#PBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 726 | ||
| LT8304HS8E#PBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 547 | ||
| LT8304ES8E#PBF | Analog Devices Inc | 100VIN uP No-Opto Iso Fly Conv RoHS : Compliant |
| 325 | ||
| AD8304-EVALZ | Analog Devices Inc | `AD8304 EVAL BOARD RoHS : Compliant |
| 15 | ||
| MAX98304EVKIT+ | Analog Devices Inc | Eval Kit MAX98304 (Mono 3.2W C |
| 11 | ||
AD8304ARUZ-RL7 | Analog Devices Inc | AD8304ARUZ-RL7nge Logarithmic RoHS : Compliant |
| 0 | ||
| AD8304ARUZ | Analog Devices Inc | lTSSOP 160dB-range Logarithmic RoHS : Compliant |
| 0 | ||
 RS | 8304 | HH Smith | 1/4" HEX MALE SPACER, MALE/MALE ADAPTER, NICKEL PLATED BRASS,8-32 THREAD, LEN 3/8" |
| 3,358 | |
| 0251001.MAT1L (7383043P) | Littelfuse Inc | FUSE AXIAL 125V PICO F 1A |
| 1,898 | ||
| 8304038 | RS Pro | 9MM BI-HEX SOCKET WITH 3/8 IN DRIVE |
| 58 | ||
| 656-1408-304F | Dialight | PANEL MOUNT INDICATOR, 1/2 INCH, FLAT BLUE, U 37.5VDC WITH TERMINALS RoHS : Compliant |
| 57 | ||
| 8304013 | RS Pro | 9MM HEX SOCKET WITH 1/4 IN DRIVE |
| 44 | ||
| 8304044 | RS Pro | BI-HEX SOCKET 12MM SQUARE 3/8IN DRIVE CHROME VANADIUM STEEL SANDBLASTED FINISH |
| 44 | ||
| 8304114 | RS Pro | 15MM BI-HEX SOCKET WITH 1/2 IN DRIVE |
| 32 | ||
| 8304123 | RS Pro | 19MM BI-HEX SOCKET WITH 1/2 IN DRIVE |
| 22 | ||
| 120108-8304 (1201088304) | Woodhead Molex | DOUBLE-ENDED, 4 POLE, 22 AWG, M12 TO M12, MALE, STRAIGHT, 1 M, 120108 SERIES |
| 22 | ||
| 8304066 | RS Pro | 18MM BI-HEX SOCKET WITH 3/8 IN DRIVE |
| 19 | ||
| 8304 | Olympic Wire & Cable Corp | MULTICONDUCTOR CABLE,5C,16AWG,7X24,BC, PVC INS, BLACK PVC JKT, TFFN |
| 0 | ||
| 8304 | GC Electronics | ANTENNA WALL MOUNT |
| 0 | ||
| 8304 | Olympic Wire & Cable Corp | MULTICONDUCTOR CABLE, 5C, 16AWG, 7X24, BC, PVC INS, BLACK PVC JKT, TFFN |
| 0 | ||
| 8304 | Russellstoll | EVER-LOK FEMALE RECEPTACLE FOR FS, FD FSWS, FDWS, 50A, 250V, 3POLE4WIRE |
| 0 | ||
| 8304 | Littelfuse Inc | NUT FACE 5/8-32 CHROMALLOY |
| 0 | ||
 Microchip Technology Inc | MIC28304-2YMP-TR | Microchip Technology Inc | 70V, 3A Hyper Speed Control Power Module, B1QFN, Projected EOL: 2041-06-10 RoHS : Compliant |
| 9,000 | |
| DSC1101AE3-098.3040 | Microchip Technology Inc | MEMS OSC, LVCMOS, 98.304MHz, 20PPM, 2.5-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-07-29 RoHS : Compliant |
| 2,405 | ||
| DSC1101AE3-098.3040T | Microchip Technology Inc | MEMS OSC, LVCMOS, 98.304MHz, 20PPM, 2.5-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-07-29 RoHS : Compliant |
| 2,405 | ||
| DSC1121BE5-098.3040 | Microchip Technology Inc | MEMS OSC, LVCMOS, 98.304MHz, 10PPM, 2.5-3.3V, -20 to 70C, 5.0x3.2mm, VDFN, Projected EOL: 2046-05-19 RoHS : Compliant |
| 2,271 | ||
| DSC1121BE5-098.3040T | Microchip Technology Inc | MEMS OSC, LVCMOS, 98.304MHz, 10PPM, 2.5-3.3V, -20 to 70C, 5.0x3.2mm, VDFN, Projected EOL: 2046-05-19 RoHS : Compliant |
| 2,271 | ||
PIC16F83-04/P | Microchip Technology Inc | MCU CMOS 18 LD 4MHZ .5K FLASH, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,150 | ||
| DSC1103DL2-098.3040 | Microchip Technology Inc | MEMS OSC, LVDS, 98.304MHz, 25PPM, 2.5-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-05-30 RoHS : Compliant |
| 450 | ||
| DSC1103DL2-098.3040T | Microchip Technology Inc | MEMS OSC, LVDS, 98.304MHz, 25PPM, 2.5-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-05-30 RoHS : Compliant |
| 450 | ||
| MIC28304-1-5V-EV | Microchip Technology Inc | MIC28304-1 5V Evaluation Board, Projected EOL: |
| 185 | ||
| MIC28304-2-5V-EV | Microchip Technology Inc | MIC28304-2-5V Evaluation Board, Projected EOL: |
| 51 | ||
| MIC28304-1-12V-EV | Microchip Technology Inc | MIC28304-1 12V Evaluation Board, Projected EOL: |
| 14 | ||
| MIC28304-2-12V-EV | Microchip Technology Inc | MIC28304-2-12V Evaluation Board, Projected EOL: |
| 5 | ||
PIC16CR83-04/SO | Microchip Technology Inc | MCU CMOS 18 LD 4MHZ 512 ROM, Projected EOL: - Contact for Pricing RoHS : Compliant | 0 | |||
| M55310/28-B01B9M8304000 | Microchip Technology Inc | M55310/28-B01B9M8304000, Projected EOL: 2050-11-17 - Contact for Pricing | 0 | |||
| VC-801A-DAJ-KAAN-9M83040000 | Microchip Technology Inc | VC-801A-DAJ-KAAN-9M83040000, LDFN, Projected EOL: 2051-03-17 RoHS : Compliant |
| 0 | ||
 Bisco Industries | MS17830-4C | MS Nuts | 28,896 | |||
| NAS8304-7 | Heartland Precision Fasteners Inc | 5,056 | ||||
| MS16628-3043 | Rotor Clip Company Inc | 760 | ||||
| BP-37FT-08-304-S0R | MISC SEALS | 91 | ||||
| M25988/3-042 | Military Specifications | 25 | ||||
| M25988/3-046 | Military Specifications | 21 | ||||
| 37FT-08-304-PLN SEAL | MISC SEALS | 13 | ||||
| 8304 | HH Smith | 10 | ||||
| 98304.2 | CONTA-CLIP Inc | 10 | ||||
| 283-0440 | MISCELLANEOUS | 6 | ||||
| 08830415 | MISCELLANEOUS | 3 | ||||
| 18304B-B-0632-4 | Amatom Electronic Hardware | 3 | ||||
| 83041-0021000 ROLL | Belden Inc | 3 | ||||
| 8304HA-256-256-23 | Accurate Screw Machine | 3 | ||||
| 788-304 | MISC. RESISTORS | 1 | ||||
 Onlinecomponents.com | 8304 | Littelfuse Commercial Vehicle Products | NUT FACE 5/8-32 CHROMALLOY RoHS : Compliant |
| 400 | |
| 8304 | HH Smith | Brass Male/Male Adapter - 1/4" Hex - 8-32 Thread Side A - 3/8" Length Side A - 8-32 Thread Side B - 3/8" Length Side B. RoHS : Compliant |
| 0 | ||
| 8304 | Thomas & Betts | Ever-Lok Female Receptacle Only with Flap Cover for FS; FD FSWS; FDWS And Similar Conduit Fittings - 50 Amp - 250V - 3 Pole 4 Wire. RoHS : Compliant |
| 0 | ||
| 8304-500 | Olympic Wire & Cable Corp | RoHS : Compliant |
| 0 | ||
| 39543-8304 | Molex | 5.0MM EUROBLOCK PC 45 BLK 11A 4CKT RoHS : Compliant |
| 0 | ||
| 39593-8304 | Molex | 5.0MM EUROBLOCK PC 45 GRN 11A 4CKT RoHS : Compliant |
| 0 | ||
| 39517-8304 | Molex | 3.81MM EURO PLUG VERT ME FWE GRN 10AV 4C RoHS : Compliant |
| 0 | ||
| 8304-1000 | Olympic Wire & Cable Corp | Jackpost for Commercial Micro-D PCB Mount Plugs, 2-56 UNC-2B Internal Thread RoHS : Compliant |
| 0 | ||
| C115288-8304 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 39523-8304 | Molex | 5.0MM EURO PLUG VERT FWE GRN 10AV 4CKT RoHS : Compliant |
| 0 | ||
| VHT-8304 | Quest Technology International Inc | Powerbridge Cable Solution Low-voltage Pass-thru, RoHS : Compliant |
| 0 | ||
| 39537-8304 | Molex | 5.08MM EURO PLUG VERT ME FWE GRN 10AV 4C RoHS : Compliant |
| 0 | ||
| 8304-100 | Belden Inc | WIRE AND CABLE RoHS : Compliant |
| 0 | ||
| 8304-0025 | GC Electronics | Wall Mount-Medium Duty, 4 In Clearance (Box Of 25) RoHS : Compliant |
| 0 | ||
| 39533-8304 | Molex | 5.08MM EURO PLUG VERT FWE GRN 10AV 4CKT RoHS : Compliant |
| 0 | ||
 Rochester Electronics | NB3M8304CDR2G | onsemi | Clock Buffer 1:4 200MHz 8-SOIC T/R RoHS : Compliant |
| 2,078 | |
| NB3M8304CDG | onsemi | Clock Buffer 1:4 200MHz 8-SOIC Tube RoHS : Compliant |
| 5,602 | ||
| IRF8304MTRPBF | Infineon Technologies AG | MOSFET N-Channel 30V 28A (Ta), 170A (Tc) DirectFET T/R RoHS : Compliant |
| 3,795 | ||
| MAX98304DEWL+ | Analog Devices Inc | Mono 3.2W Class D Amp RoHS : Compliant |
| 2,004 | ||
| AD8304ARU | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 10MHz Band Width, PDSO14 RoHS : Not Compliant |
| 6,717 | ||
| A8304SESTR-T | Allegro MicroSystems LLC | IC VOLT REG 1 16-QFN T/R RoHS : Compliant |
| 343 | ||
| CG8304AA | Cypress Semiconductor | SRAM Tray |
| 68 | ||
NDH8304P | Fairchild Semiconductor Corporation | MOSFET 2 P-Channel 20V 2.7A 8-SMD RoHS : Compliant |
| 78,203 | ||
| IRF8304MTRPBF | International Rectifier | MOSFET N-Channel 30V 28A (Ta), 170A (Tc) DirectFET T/R RoHS : Compliant |
| 1,931 | ||
| PSB8304VV1.1 | Lantiq | XWAY WAV300 Wi-Fi Chipset |
| 430 | ||
DSC1001AI2-098.3040T-7.00-mm-x-5.00-mm.jpg) | Microchip Technology Inc | CRYSTAL OSC XO (Standard) CMOS 98.304MHz 1.7V ~ 3.6V ±25ppm 4-SMD T/R RoHS : Compliant |
| 1,000 | ||
| 8304AMLF | Renesas Electronics Corporation | Clock Buffer 1:4 166MHz 8-SOIC Tube RoHS : Compliant |
| 7 | ||
| SIT8008AC-12-33E-98.304000E | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 98.304MHz 2.97V ~ 3.63V ±25ppm 4-SMD T/R RoHS : Compliant |
| 1,000 | ||
| SIT8102ACL43-33E-98.30400Y | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS 98.304MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 2,000 | ||
| SIT8103AC-83-33E-98.30400Y | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 98.304MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 1,000 | ||
 Sager | 8304 | ABB Group | Thomas & Betts |
| 0 | |
| 0830425 | Phoenix Contact | Wire Labels & Markers WM-CARRIER/B (85X15)LPR RoHS : Compliant |
| 0 | ||
0830470 | Phoenix Contact | Labels and Industrial Warning Signs PML-W303 74x37 | 0 | |||
| 1-655830-4 | TE Connectivity | Bench Top Tools ISOLATIONSCRIMPER | 0 | |||
| 9858304014 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858304096 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858304140 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 468-30487-001 | Carling Technologies | Littelfuse | 0 | |||
| 6450830-4 | TE Connectivity | Power to the Board 2P/32S/2LP MBXLE R/A HEADER RoHS : Compliant | 0 | |||
| 0830429 | Phoenix Contact | Wire Labels & Markers PML-W100 25x25 R RoHS : Compliant |
| 0 | ||
0830474 | Phoenix Contact | Labels and Industrial Warning Signs PML-W304 74x37 | 0 | |||
| 830-40-021-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 830-40-022-30-002000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant | 0 | |||
| 830-40-023-30-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 830-40-030-30-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
 TME | 0028304 | Lapp Group | Wire; UNITRONIC® LiYY; LiYY; 4x0.25mm2; unshielded; 500V; Cu; grey RoHS : Compliant |
| 3,834 | |
0830432 | Phoenix Contact | Label; warning; PVC; W: 12.5mm; H: 12.5mm; yellow; self-adhesive RoHS : Compliant |
| 10 | ||
| 088-3-042-0-F-XS0-1770 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 42; THT; angled; 3x14 RoHS : Compliant |
| 0 | ||
| 088-3-048-0-F-XS0-1080 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 48; THT; angled; 3x16 RoHS : Compliant |
| 0 | ||
| 208304 | Cimco Integration | Drill: for concrete; Ø: 5mm; L: 160mm; HM steel,cemented carbide |
| 0 | ||
| 008304 20 000 1000 | RECA | Screw; M4; M4x20; Head: cheese head; hex key; HEX 3mm; steel |
| 0 | ||
| 008304 25 000 1000 | RECA | Screw; M4; M4x25; Head: cheese head; hex key; HEX 3mm; steel |
| 0 | ||
| 008304 55 000 500 | RECA | Screw; M4; M4x35; Head: cheese head; hex key; HEX 3mm; steel |
| 0 | ||
| 088-3-045-0-S-XS0-0740 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 45; THT; angled; 3x15 RoHS : Compliant |
| 0 | ||
| 088-3-048-0-T-XS0-1890 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 48; THT; angled; 3x16 RoHS : Compliant |
| 0 | ||
| 1830415 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 1830456 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 1830460 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 008304 12 000 1000 | RECA | Screw; M4; M4x12; Head: cheese head; hex key; HEX 3mm; steel |
| 0 | ||
| 088-3-042-0-F-XS0-1890 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 42; THT; angled; 3x14 RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | DRV8304HRHAT | Texas Instruments | RoHS : Compliant | 58,489 | ||
| DRV8304SRHAR | Texas Instruments | RoHS : Compliant | 23,774 | |||
| AD8304ARUZ-RL7 | Analog Devices Inc | IC LOGARITHM CONV 160DB 14-TSSOP RoHS : Compliant | 3,000 | |||
 ComSIT USA | LT8304HS8EPBF | Analog Devices Inc | AVAILABLE EU | 617 | ||
ComSIT USA | Q983040JXS75321530RS60SELF | Jauch Quartz America | Electronic Component RoHS : Compliant | 15,000 | ||
| SX7983040032TR | Sunny Electronics Corp | Electronic Component RoHS : Compliant | 8,000 | |||
| Q983040JXS63163020S317002LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 7,000 | |||
| 04830419AATR | STMicroelectronics | Electronic Component RoHS : Not Compliant | 4,200 | |||
| PIC16LF8304ISO | mct | 18-PIN FLASH/EEPROM 8-BIT MICROCONTROLLER RISC Microcontroller, 8-Bit, FLASH, PIC CPU, 4MHz, CMOS, PDSO18 RoHS : Not Compliant | 4,140 | |||
| MAL203830471E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount RoHS : Compliant | 4,000 | |||
| ESA983040F30E33F | Hosonic Electronic Co Ltd | Electronic Component RoHS : Compliant | 2,000 | |||
| IRF8304MTR1PBF | International Rectifier | DIRECTFET POWER MOSFET Power Field-Effect Transistor, 28A I(D), 30V, 0.0022ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 1,000 | |||
| B78304B1031A3 | epc | DC/DC CONVERTER INDUCTOR SMPS Transformer RoHS : Compliant | 782 | |||
| 9SL9830430AFHOF0 | hkc | Electronic Component RoHS : Compliant | 700 | |||
| CLT83043KX | Microsemi Corporation (now Microchip) | Electronic Component RoHS : Not Compliant | 156 | |||
| DP8304BN | National Semiconductor Corporation | 8-BIT TRI-STATE BIDIRECTIONAL TRANSCEIVER (NON-INVERTING) Bus Transceiver, TTL/H/L Series, 1-Func, 8-Bit, True Output, TTL, PDIP20 RoHS : Not Compliant | 100 | |||
| PIC16F8304P | Microchip Technology Inc | MCU 8-bit PIC RISC 896B Flash 5V 18-Pin PDIP Tube RoHS : Not Compliant | 78 | |||
| AD8304ARUZ | Analog Devices Inc | 160 DB RANGE (100 PICO AMP-10 MILLI AMP) LOGARITHMIC CONVERTER Log Or Antilog Amplifier, 1 Func, 10MHz Band Width, PDSO14 RoHS : Compliant | 16 | |||
 Interstate Connecting Components | 788-304 | WAGO Innovative Connections | RoHS : Compliant |
| 27 | |
| 5747830-4 | TE Connectivity | 25 MSFL RCPT RA 590L(IN,FM,BL) RoHS : Compliant |
| 0 | ||
| JPLD-83046 | Amphenol Industrial Operations | PLUG | 0 | |||
| 383040-000 | TE Connectivity | 44A0141-22-9/9/9/9 RoHS : Compliant | 0 | |||
| RJE1D18830411 | Amphenol Commercial | STANDARD PROFILE, TAB DOWN CAT | 0 | |||
| 155708-3041 | ITT Interconnect Solutions | MKJ1A26Z17-85SE | 0 | |||
| 041783-0445 | ITT Interconnect Solutions | DPX2ME-45S-45S-33B-00-01 | 0 | |||
| 68304-1 | TE Connectivity | DIE AMPOWER 69099 4/0 |
| 0 | ||
| 61083-042406LF | Amphenol FCi | OEM ITEM 545-5BXF-BRGSTK0.8 HEADER RoHS : Compliant |
| 0 | ||
| 61083-044602LF | Amphenol FCi | 0.8MM B TO B PLUG ASSY RoHS : Compliant |
| 0 | ||
| M24308/8-304Z | Amphenol Positronic | KITTED WITH CONTACTS CONNECTOR M24308/8-326Z |
| 0 | ||
| 5-6450830-4 | TE Connectivity | MBXLE R/A HDR 2P+8S+2P RoHS : Compliant |
| 0 | ||
| 155528-3041 | ITT Interconnect Solutions | MKJ1A1T17-85SE | 0 | |||
| 61083-042606LF | Amphenol FCi | BERGSTAK P2 40P-61083-042606LF RoHS : Compliant | 0 | |||
| 61083-044400LF | Amphenol FCi | 0.8MM B TO B PLUG ASSY RoHS : Compliant |
| 0 | ||
 NexGen Digital | AS-9.8304-18-SMD-TR | Raltron Electronics Corporation | RoHS : Compliant | 60 | ||
| 89898-304LF | TE Connectivity | 52 | ||||
| SG-8002JA-9.8304M-SCCB | Seiko Epson Corporation | 7 | ||||
 PEI Genesis | 91-569783-04P | Amphenol Corporation |
| 200 | ||
| 88-569783-04P | Amphenol Corporation |
| 174 | |||
| 556-3508-304F | Dialight | RoHS : Compliant |
| 16 | ||
| 91-569783-04G | Amphenol Corporation |
| 6 | |||
| SE1A1308-3.0-4 | SOURIAU-SUNBANK |
| 0 | |||
| 1830-4-B7-W8 | HellermannTyton |
| 0 | |||
| 1830-4-G-WM250 | HellermannTyton |
| 0 | |||
| 556-1508-304F | Dialight | RoHS : Compliant |
| 0 | ||
| 23A02038-304 | SOURIAU-SUNBANK |
| 0 | |||
| SE17FMR7208-3.0-4 | SOURIAU-SUNBANK |
| 0 | |||
| 1830-4-H-WM250 | HellermannTyton |
| 0 | |||
| 556-1608-304F | Dialight | RoHS : Compliant |
| 0 | ||
| SE19F28-3.0-4W6 | SOURIAU-SUNBANK |
| 0 | |||
| 1830-4-H-W8 | HellermannTyton |
| 0 | |||
| 1830-4-J-WM250 | HellermannTyton |
| 0 | |||
 Powell Electronics | 10128768-304KLF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 22,176 | |
| 61083-042402LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 2,609 | ||
| 89898-304ALF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 858 | ||
| 61083-043400LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 504 | ||
| 8304950001 | TE Connectivity | Connectors |
| 330 | ||
| M80-5830405 | Harwin | Datamate J-Tek DIL Male Small Bore (24-2 RoHS : Compliant |
| 185 | ||
| 183040-1 | TE Connectivity | Comm Circular Connect RoHS : Compliant |
| 123 | ||
| 1757830-4 | TE Connectivity | D-Sub Connectors |
| 39 | ||
| M20-7830446 | Harwin | Headers & Wire Housings RoHS : Compliant |
| 31 | ||
| SJS830411 | Amphenol PCD | Luminus Circular Connector |
| 18 | ||
| 556-3508-304F | Dialight | 1 DOME RED LED PMI 37.5VDC RoHS : Compliant |
| 11 | ||
| EX-HA008304 | Amphenol RF | RF Connector |
| 7 | ||
| 5747830-4 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 3 | ||
| 4-854830-4 | TE Connectivity | CRIMPER, INSULATION SPECIAL |
| 3 | ||
| 68304-1 | TE Connectivity | Tools |
| 1 | ||
 PUI | 2012-1X18G00S/083/045R/I2 | 4,258 | ||||
 Richardson RFPD | R948304600 | Radiall | Test Lead Patch Cord RoHS : Compliant | 0 | ||
| SI5338A-B08304-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 48-30-44 | Spectrum Control | High Power Fixed Coaxial Attenuator RoHS : Compliant |
| 0 | ||
| CCHD-575-25-98.304 | Crystek Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | |||
| 58-30-43 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| AS-9.8304-30-EXT-SMD-TR | Raltron Electronics Corporation | CRYSTAL RESONATOR RoHS : Compliant | 0 | |||
| LT8304HS8E#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Flyback 385kHz 8-Pin SOIC RoHS : Compliant |
| 0 | ||
| 298-30-44-LIM | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 258-30-43 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 58-30-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| LT8304IS8E#PBF | Analog Devices Inc | DC/DCCntrlr Single-OUT Flyback 385kHz 8-Pin SOIC N RoHS : Compliant |
| 0 | ||
| 68-30-43-LIM | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| LT8304IS8E-1#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Flyback 385kHz 8-Pin SOIC RoHS : Compliant |
| 0 | ||
| LT8304HS8E-1#TRPBF | Analog Devices Inc | DC/DCCntrlr Single-OUT Flyback 385kHz 8-Pin SOIC N RoHS : Compliant |
| 0 | ||
ABLS3-9.8304MHZ-D4Y-T | Abracon Corporation | Crystal 9.8304MHz ±30ppm (Tol) ±30ppm (Stability) RoHS : Compliant |
| 0 | ||
 Rutronik | CAL9830415AEHHF0-RE02 | Hong Kong X'Tals Ltd | CA 5032 9,830400M 15pF 30ppm RoHS : Compliant |
| 6,000 | |
 Chip 1 Exchange | SP001138304 | Infineon Technologies AG | INSTOCK | 16,000 | ||
| B78304-B1145A3 | INSTOCK | 6,294 | ||||
| 803-83-040-10-005101 | PRECI | INSTOCK | 3,891 | |||
| 83042 | INSTOCK | 1,680 | ||||
| 83042 | ROHM Semiconductor | INSTOCK | 840 | |||
| MG3A-9.8304MHZ | INSTOCK | 619 | ||||
| 61083-044402LF | Amphenol FCi | INSTOCK RoHS : Compliant | 600 | |||
| HC49ISMX-9.8304MHZ | INSTOCK | 434 | ||||
| HC49/SMX-9.8304MHZ | INSTOCK | 434 | ||||
| ABM2-9.8304MHZ-D4Y | INSTOCK | 295 | ||||
| APA83044913 | INSTOCK | 235 | ||||
| 1830431- | Phoenix Contact | INSTOCK | 215 | |||
| DM8304N | National Semiconductor Corporation | INSTOCK | 200 | |||
| ICS8304AMLF | ICS | INSTOCK | 119 | |||
| 661678-304 | INSTOCK | 18 | ||||
 Avnet Abacus | B78304B1032A3 | TDK Corporation | Power Transformer 111 Triple Prim Triple Sec SMD (Alt: B78304B1032A003) RoHS : Compliant | 16,200 | ||
| 89898-304ALF | Amphenol Corporation | Conn Socket Strip Receptacle 8 POS 254mm Solder ST SMD - Tape and Reel (Alt: 89898-304ALF) RoHS : Compliant | 12,350 | |||
| M20-7830446 | Harwin | PCB Receptacle BoardtoBoard 254 mm 2 Rows 8 Contacts Through Hole Mount M20 (Alt: M20-7830446) RoHS : Compliant | 3,294 | |||
| 61083-041402LF | Amphenol Corporation | Conn Stacking Plug 40 POS 5mm to 17mm Stack Height 08mm Solder ST Surface Mount - Tape and Reel (Alt: 61083-041402LF) RoHS : Compliant | 2,700 | |||
| 183040-1 | TE Connectivity | Circular Connector Circular Industrial CPC Series 1 Flange Mount Receptacle 14 Contacts (Alt: 183040-1) RoHS : Compliant | 2,225 | |||
| 61083-044402LF | Amphenol Corporation | Mezzanine Connector 08 mm 2 Rows 40 Contacts Brass (Alt: 61083-044402LF) RoHS : Compliant | 600 | |||
| 801-83-040-10-132101 | PRECI-DIP SSA | (Alt: 801-83-040-10-132101) RoHS : Compliant | 200 | |||
| 6450830-4 | TE Connectivity | (Alt: 6450830-4) RoHS : Compliant | 0 | |||
| 5747830-4 | TE Connectivity | Conn DSubminiature SKT 25 POS 277mm Solder RA ThruHole 25 Terminal 1 Port (Alt: 5747830-4) RoHS : Compliant | 0 | |||
| 1-655830-4 | TE Connectivity | (Alt: 1-655830-4) RoHS : Not Compliant | 0 | |||
| 4-655830-4 | TE Connectivity | (Alt: 4-655830-4) RoHS : Not Compliant | 0 | |||
| 801-83-044-10-001101 | PRECI-DIP SSA | Conn Socket Strip SKT 44 POS 254mm Solder ST ThruHole Bulk (Alt: 801-83-044-10-001101) RoHS : Compliant | 0 | |||
| 803-83-040-10-005101 | PRECI-DIP SSA | (Alt: 803-83-040-10-005101) RoHS : Compliant | 0 | |||
| 803-83-040-10-249101 | PRECI-DIP SSA | Conn Socket Strip SKT 40 POS 254mm Solder ST ThruHole Bulk (Alt: 803-83-040-10-249101) RoHS : Compliant | 0 | |||
| 803-83-048-10-001101 | PRECI-DIP SSA | Conn Socket Strip SKT 48 POS 254mm Solder ST ThruHole Bulk (Alt: 803-83-048-10-001101) RoHS : Compliant | 0 | |||
Avnet Asia | 10194149-830421RPF | Amphenol Corporation | (Alt: 10194149-830421RPF) RoHS : Compliant | 0 | ||
| 61083-042502LF | Amphenol Corporation | (Alt: 61083-042502LF) RoHS : Compliant | 0 | |||
| ACO-9.8304MHZ-D-R-S-A | Abracon Corporation | (Alt: ACO-9.8304MHZ-D-R-S-A) RoHS : Compliant | 0 | |||
| 89898-304ALF | Amphenol Corporation | (Alt: 89898-304ALF) RoHS : Compliant | 0 | |||
| 61083-041502LF | Amphenol Corporation | (Alt: 61083-041502LF) RoHS : Compliant | 0 | |||
| CIS-Q338304A-00-M6 | Qnity Laird | (Alt: CIS-Q338304A-00-M6) RoHS : Compliant | 0 | |||
| 10159558-830411RPF | Amphenol Corporation | FCI10159558-830411RPF COMBOSTAK CONNECTO (Alt: 10159558-830411RPF) RoHS : Compliant | 0 | |||
| 282830-4 | TE Connectivity | (Alt: 282830-4) RoHS : Compliant | 0 | |||
| 61083-042702LF | Amphenol Corporation | Connector Stacking Plug 40 Position 0.8mm Solder 5.7mm Stack Height Straight Surface Mount (Alt: 61083-042702LF) RoHS : Compliant | 0 | |||
| 61083-044402LF | Amphenol Corporation | (Alt: 61083-044402LF) RoHS : Compliant | 0 | |||
| 61083-042402LF | Amphenol Corporation | (Alt: 61083-042402LF) RoHS : Compliant | 0 | |||
| 61083-044422LF | Amphenol Corporation | (Alt: 61083-044422LF) RoHS : Compliant | 0 | |||
| 61083-043402LF | Amphenol Corporation | (Alt: 61083-043402LF) RoHS : Compliant | 0 | |||
| 10194149-830411RPF | Amphenol Corporation | (Alt: 10194149-830411RPF) RoHS : Compliant | 0 | |||
| 61083-041402LF | Amphenol Corporation | (Alt: 61083-041402LF) RoHS : Compliant | 0 | |||
 Avnet Silica | PAM8304AYR | Diodes Incorporated | Audio Power Amplifier 3W x 1 4Ohm D 1 Channels 28V to 6V DFN3030 8 Pins (Alt: PAM8304AYR) RoHS : Compliant | 0 | ||
| PAM8304ASR | Diodes Incorporated | Audio Power Amplifier 3W x 1 4Ohm D 1 Channels 28V to 6V MSOP 8 Pins (Alt: PAM8304ASR) RoHS : Compliant | 0 | |||
| NB3M8304CDR2G | onsemi | Fanout Buffer with LVCMOSLVTTL Low Skew 33 V 200 MHz 14 (Alt: NB3M8304CDR2G) RoHS : Compliant | 0 | |||
| PIC16F83-04/P | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 896byte Flash 25V33V5V 18Pin PDIP Tube (Alt: PIC16F83-04/P) RoHS : Compliant | 0 | |||
| PIC16F83-04/SO | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 896byte Flash 25V33V5V 18Pin SOIC W Tube (Alt: PIC16F83-04/SO) RoHS : Compliant | 0 | |||
| PIC16F83-04I/SO | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 896byte Flash 25V33V5V 18Pin SOIC W Tube (Alt: PIC16F83-04I/SO) RoHS : Compliant | 0 | |||
| MIC28304-2YMP-TR | Microchip Technology Inc | Conv DCDC Single Step Down 45V 70V 64Pin VQFN TR (Alt: MIC28304-2YMP-TR) RoHS : Compliant | 0 | |||
MIC28304-1YMP-TR | Microchip Technology Inc | Conv DCDC Single Step Down 45V to 70V 64Pin QFN TR (Alt: MIC28304-1YMP-TR) RoHS : Compliant | 0 | |||
| NX3211E0098.304000 | Diodes Incorporated | Oscillator 98304 MHz 50 ppm SMD 32mm x 25mm 33 V CMOS NX321 XO (Alt: NX3211E0098.304000) RoHS : Compliant | 0 | |||
DSC1001DI1-098.3040T-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | (Alt: DSC1001DI1-098.3040T) RoHS : Compliant | 0 | |||
| SIT8008BI-13-18E-9.830400 | SiTime Corporation | SIT8008 I Low Power Programmable oscillator (Alt: SIT8008BI-13-18E-9.830400) RoHS : Compliant | 0 | |||
| SIT3809AI-23-33NG-98.304000 | SiTime Corporation | Voltage Controlled Crystal Oscillator VCXO 98304MHz 50ppm LVCMOS 4Pin SMD Bulk (Alt: SIT3809AI-23-33NG-98.304000) RoHS : Compliant | 0 | |||
| SIT8008AC-12-33E-98.304000E | SiTime Corporation | PROGRAMMABLE LOW POWER OSCILLATOR 20 TO 70C 2520 25PPM 33V 98304MHZ OE SMD NRND (Alt: SIT8008AC-12-33E-98.304000E) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ABLS-9.8304MHZ-L4Q-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD |
| 0 | |
ABLNO-V-98.304MHZ | Abracon Corporation | XTAL OSC VCXO 98.3040MHZ LVCMOS RoHS : Compliant |
| 0 | ||
| ABM7-9.8304MHZ-D2Y-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD |
| 0 | ||
ABL-9.8304MHZ-B2 | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF T/H RoHS : Compliant |
| 0 | ||
| ABLS3-9.8304MHZ-D4Y-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| ABLSG-9.8304MHZ-D2Y-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD |
| 0 | ||
FC7ASBBMD9.8304-T2 | Abracon Corporation | SMD Crystal, 9.8304 MHz, Tolerance 50.0 ppm, Stability 50.0 ppm, -10 To +60 C, 20pF, 7.5 x 5 mm RoHS : Compliant |
| 0 | ||
ABLS2-9.8304MHZ-D4Y-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| ACO-9.8304MHZ-EK | Abracon Corporation |
| 0 | |||
ABM3-9.8304MHZ-B4Y-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
ABC2-9.8304MHZ-4-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| ABLNO-98.304MHZ | Abracon Corporation | XTAL OSC XO 98.3040MHZ LVCMOS RoHS : Compliant |
| 0 | ||
| ABLS-9.8304MHZ-K4T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD |
| 0 | ||
ABLS-LR-9.8304MHZ-T | Abracon Corporation | CRYSTAL 9.8304MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
FC4SDCBMF9.8304-T1 | Abracon Corporation | SMD Crystal, 9.8304 MHz, Tolerance 30.0 ppm, Stability 50.0 ppm, -20 To +70 C, 20pF, 13.2 x 4.8 mm RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | VM6S-9.8304MHZ | CTS Valpey Corporation | IN STOCK SHIP TODAY | 16,000 | ||
| G9.8304 | IN STOCK SHIP TODAY | 5,000 | ||||
| ATSM-49-9.8304MHZ | MtronPTI | IN STOCK SHIP TODAY | 5,000 | |||
| CE8304 | MECHANIKAI M | IN STOCK SHIP TODAY | 1,820 | |||
| 83043-009-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 500 | ||
| 52883-0404 | Molex | IN STOCK SHIP TODAY RoHS : Not Compliant | 219 | |||
| SDP8304-301 | Honeywell Sensing and Control | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
8304AMILF | Integrated Device Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 28 | ||
DP8304BN | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 19 | ||
| MA-506-9.8304MHZ | Seiko Epson Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| XO-43B-9.8304MHZ | Vishay Dale | IN STOCK SHIP TODAY |
| 4 | ||
| 83048-010-100 | Belden Inc | IN STOCK SHIP TODAY |
| 2 | ||
| 010-11008-304 | Remec Q-Bit | IN STOCK SHIP TODAY |
| 1 | ||
| 83048-005-100 | Belden Inc | IN STOCK SHIP TODAY |
| 1 | ||
| 350830-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | SHC1032X3/8-304SS | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 3,750 | |
| MS17830-4C | Military Specifications |
| 2,342 | |||
| PRH830-4 | Pop Rivets | 0 | ||||
| 183042070409 | Essentra Components | PEEK SOCKET HEAD SCREW M4 X 20 | 0 | |||
| 183043070409 | Essentra Components | PEEK SOCKET HEAD SCREW M4 X 30 | 0 | |||
| 308304040050 | Essentra Components | 0 | ||||
| 183041070409 | Essentra Components | PEEK SOCKET HEAD SCREW M4 X 10 | 0 | |||
| 8304-1032-A-24 | RAF Electronic Hardware | 0 | ||||
| 183042570409 | Essentra Components | PEEK SOCKET HEAD SCREW M4 X 25 | 0 | |||
| 308304041152 | Essentra Components | 0 | ||||
| 083040200001 | Essentra Components | 0 | ||||
| 183041270409 | Essentra Components | SOCKET HEAD SCREW M4X12 MM BROWN | 0 | |||
| 183041570409 | Essentra Components | PEEK SOCKET HEAD SCREW M4 X 15 | 0 | |||
| 183040870409 | Essentra Components | PEEK SOCKET HEAD SCREW M4 X 8 | 0 | |||
 EBV Elektronik | NB3M8304CDR2G | onsemi | Fanout Buffer with LVCMOSLVTTL Low Skew 33 V 200 MHz 14 (Alt: NB3M8304CDR2G) RoHS : Compliant | 0 | ||
| MIC28304-2YMP-TR | Microchip Technology Inc | Conv DCDC Single Step Down 45V 70V 64Pin VQFN TR (Alt: MIC28304-2YMP-TR) RoHS : Compliant | 0 | |||
| MIC28304-1YMP-TR | Microchip Technology Inc | Conv DCDC Single Step Down 45V to 70V 64Pin QFN TR (Alt: MIC28304-1YMP-TR) RoHS : Compliant | 0 | |||
| SGM8304YTS14G/TR | SG Micro Corp | (Alt: SGM8304YTS14G/TR) RoHS : Compliant | 0 | |||
| MIC28304-2YMP-T1 | Microchip Technology Inc | Conv DCDC Single Step Down 45V to 70V 64Pin QFN (Alt: MIC28304-2YMP-T1) RoHS : Compliant | 0 | |||
| DSC1001DI1-098.3040T | Microchip Technology Inc | (Alt: DSC1001DI1-098.3040T) RoHS : Compliant | 0 | |||
 ECCO | 058-3040-000 | ITT Interconnect Solutions |
| 88 | ||
| 0583040000 | ITT Interconnect Solutions |
| 88 | |||
 FDH Electronics | 3830-448-1 | FDH Electronics | BJG Microwave C | 50 | ||
| 8304 060100 | Wire | Wire and Cable | 5 | |||
| SE19F18-3.0-4W63 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| SE19F28-3.0-4W7 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| M83383/04-08 | Safran Electrical & Power UK | Circuit Protect | 1 | |||
| M23053/18-304-C | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 0 | |||
| M83383/04-03 | Safran Electrical & Power UK | Circuit Breaker |
| 0 | ||
| M83383/04-05 | Safran Electrical & Power UK | Circuit Protect |
| 0 | ||
| M83383/04-07 | Safran Electrical & Power UK | Circuit Breaker |
| 0 | ||
| M83383/04-10 | Safran Electrical & Power UK | Circuit Breaker |
| 0 | ||
| 53ND-78304-1 | Honeywell Sensing and Control | Switches |
| 0 | ||
| S3983-04-2.0-34 | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
 Flip Electronics | NB3M8304CDR2G | onsemi | Stock RoHS : Compliant | 85,000 | ||
| NB3M8304CDG | onsemi | Stock, Ship Today RoHS : Compliant |
| 85,000 | ||
| 8304AMILF | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 85,000 | ||
| 8304AMILFT | Renesas Electronics Corporation | Stock RoHS : Compliant | 85,000 | |||
 Maritex | 61083-044402LF | Amphenol Corporation | Board Stacking Connectors; 61083-044402LF; AMPHENOL; 2; 800 mA; Yes; 50 m? |
| 3,407 | |
| 61083-041402LF | Amphenol Corporation | Board Stacking Connectors; 61083-041402LF; AMPHENOL; 2; 800 mA; Yes; 50 m? |
| 2,065 | ||
| SJK-7U-25.00-18-30-40-C-30 | SJK | Quartz crystal; 25.000MHz; 30ppm; 18pF |
| 1,300 | ||
| Q9.8304MHZ-HC49U-32PF-30R-ROHS | Fronter Electronics Co Ltd | Quartz crystal; 9.8304MHz; HC49U; 30ppm; 32pF |
| 596 | ||
| 61083-042402LF | Amphenol Corporation | Board Stacking Connectors; 61083-042402LF; AMPHENOL; 2; 800 mA; Yes; 50 m? |
| 398 | ||
| BUZ-CPT-0918-3.0-4.0 | CONNTHERM | Sound transducer; piezo; passive; SMD; 3V; 4kHz; 65dB; 9x9x1.8mm |
| 50 | ||
| 788-304 | WAGO Innovative Connections | Electromagnetic relay; contact rating current 16A; coil voltage 24VDC; 1 changeover contacts ; 86/24 VDC; RoHS : Compliant |
| 1 | ||
 Neutron USA | 0830407 | Phoenix Contact | Labels & Industrial Warning Signs WMTB HF (40X12)R RoHS : Compliant |
| 50 | |
| 1830460 | Phoenix Contact | Pluggable Terminal Blocks 8 Pos 3.81mm pitch Through Hole Header RoHS : Compliant |
| 50 | ||
| 1830485 | Phoenix Contact | Pluggable Terminal Blocks IMC1,5/9-G-3,5 P20 THR RoHS : Compliant |
| 50 | ||
| 0830409 | Phoenix Contact | Printers WMTB HF (55X15)R |
| 12 | ||
| 0830411 | Phoenix Contact | Printers WMTB HF (55X25)R |
| 11 | ||
| 44A30-08-3-04N | Grayhill Inc | Switch Rotary 3P4T 4 Flatted Shaft Solder Lug 1A 115VAC 115VDC RoHS : Compliant |
| 2 | ||
| 0830429 | Phoenix Contact | Warning label PML-W100 (25x25) R RoHS : Compliant |
| 0 | ||
| 1830431 | Phoenix Contact | PCB Header, Male, 3.81mm, 160V 8A, 2row 5 Pos 10 Conn, MCDV 1,5/ 5-G-3,81 RoHS : Compliant |
| 0 | ||
| 556-3608-304F | Dialight | Dialight 556-3608-304F DOME GREEN LED, Panel Mount Indicator, 37 VDC, 1 inch RoHS : Compliant |
| 0 | ||
| 09140083042 | HARTING Technology Group | Heavy Duty Power Connectors Han MegaBit Male Insert for connecting to pcb adapter (w/ shield connection to frame) RoHS : Compliant |
| 0 | ||
| 0830426 | Phoenix Contact | Wire Identification US-EMP 8.8x15 YE RoHS : Compliant |
| 0 | ||
| 1830486 | Phoenix Contact | Terminal Block, PCB header, Male, 2row 10 Pos 20conn, 3.81mm pitch Through Hole RoHS : Compliant |
| 0 | ||
| 55830449 | WIKA Instrument LP | Pressure Sensor;0-1 psi;4-20mA;2-wire;1/4" NPT |
| 0 | ||
| CX3988-3045 | SOCKET | SOCKETSCAN S720 GENERAL PURPOSE 2D READER WHT & BLK DOCK |
| 0 | ||
| QS30EXH2OQ5-83043 | Banner Engineering Corp | Photoelectric, QS30EXH2OQ5-83043 6IN 5-PIN EURO S.S. NUT |
| 0 | ||
 Pasternack Enterprises US | PE3C9830-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to SMA Male Low Loss Cable 48 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N female bulkhead to SMA male low loss cable 48 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male low loss cable 48 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C9830-48 can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3C9830-48 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9830-48 can also be used in the other direction and will be SMA male to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 48 inch length using TCOM-240 coax with Times Microwave components. |
| 5 | |
| PE3C8304-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-200CM can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-200CM can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8304-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-48 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-48 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3830-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Female Bulkhead Cable 48 Inch Length Using RG402 Coax., Radio frequency assembly N male to N female bulkhead cable 48 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 48 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3830-48, can also be known as a N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3830-48 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3830-48 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 48 inch length using RG402 coax. |
| 0 | ||
| PE3C8304-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-100CM can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-100CM can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE38830-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Male to TNC Male Cable 48 Inch Length Using PE-B100 Coax., Radio frequency assembly TNC male to TNC male cable 48 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 48 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE38830-48, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE38830-48 is built with PE-B100 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 48 inch length using PE-B100 coax. |
| 0 | ||
| PE3C7830-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.3-10 Male to 4.3-10 Female 4 Hole Flange Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male to 4.3-10 female 4 hole flange low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 female 4 hole flange low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 4 hole flange cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7830-48, can also be known as a low PIM 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7830-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7830-48 can also be used in the other direction and will be 4.3-10 female 4 hole flange to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 female 4 hole flange low PIM cable 48 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8304 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3C8304-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-36 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-36 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3830-48 | Pasternack Enterprises |
| 0 | |||
| PE3C8304-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-50CM can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-50CM can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8304-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-60 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-60 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8304-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-150CM can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-150CM can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8304-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-24 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-24 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8304-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-12 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-12 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 282830-4 | TE Connectivity | TERMI-BLOK PLUG 90&180 4P. 5 Number of Positions: 4 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 4 Plug Wire-to-Board .197" | Part Number: 282830-4 | Internal Number: 282830-4 | .197" | TE Connectivity RoHS : Compliant |
| 459 | |
| 350830-4 | TE Connectivity | 15P UMNL HDR ASSY PC 94VO LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 15 Number of Rows: 3 PCB Mount Header Vertical Wire-to-Board 15 | PCB Header & Receptacle | Part Number: 350830-4 | Internal Number: 350830-4 | TE Connectivity RoHS : Compliant |
| 417 | ||
 Vyrian | 78304SL199 | Alpha Wire | Wire And Cable, 4 Conductor(s), 28AWG, 300V, Flexible Cord And Fixture Wire RoHS : Compliant | 16,958 | ||
| 1830402 | Phoenix Contact | Strip Terminal Block, 8A, 1.5mm2, 2 Row(s), 2 Deck(s) RoHS : Compliant | 12,517 | |||
| AD8304-EVALZ | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 11,843 | |||
| MAX98304EWL+T | Analog Devices Inc | 3.2W, 1 Channel(s), 1 Func, CMOS, PBGA9 RoHS : Compliant | 10,500 | |||
| MAX98304DEWL-T | Analog Devices (Maxim Integrated) | 10,360 | ||||
| LT8304IS8E-1-PBF | Analog Devices Inc | 8,455 | ||||
| LT8304HS8E#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 2.8A, 385kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 7,191 | |||
| 2-330830-4 | TE Connectivity | RF UHF Connector, 1 Contact(s), Male, Panel Mount, Panel Mount, Crimp Terminal, Plug RoHS : Compliant | 6,892 | |||
| 5747830-4 | TE Connectivity | D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, Hole .12, Receptacle RoHS : Compliant | 6,631 | |||
| 1830431 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,707 | |||
| LT8304ES8E-1-TRPBF | Analog Devices Inc | 5,348 | ||||
| LT8304IS8E#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 2.8A, 385kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 5,105 | |||
5962-3830402BDX | Texas Instruments | AND-OR-Invert Gate, LS Series, 1-Func, 10-Input, TTL, CDFP14 | 4,270 | |||
| BOOSTXL-DRV8304H | Texas Instruments | 4,150 | ||||
| SI5338A-B08304-GMR | Skyworks Solutions Inc | Processor Specific Clock Generator, 710MHz, CMOS RoHS : Compliant | 846 | |||
 Win Source Electronics | ICS8304AMILF | Integrated Device Technology Inc | RoHS : Compliant |
| 66,666 | |
| ICS8304AMILFT | Integrated Device Technology Inc | RoHS : Compliant |
| 62,460 | ||
| PAM8304AYR | Diodes Incorporated | IC AMP CLASS D MONO 3W DFN3030-8 RoHS : Compliant |
| 21,000 | ||
| RTL8304MB-CG | Realtek Semiconductor |
| 12,000 | |||
| 8304AMLF | Integrated Device Technology Inc | IC CLK BUFFER 1:4 200MHZ 8SOIC RoHS : Compliant |
| 10,000 | ||
| 8304AMILF | Integrated Device Technology Inc | IC CLK BUFFER 1:4 166MHZ 8SOIC RoHS : Compliant |
| 9,000 | ||
| 61083-042402LF | Amphenol Corporation | CONN PLUG 40POS SMD GOLD / 40 Position Connector Plug, Center Strip Contacts Surface Mount Gold |
| 2,360 | ||
| LT8304ES8E-1#PBF | Analog Devices Inc | IC REG FLYBACK ADJ 2A 8SOIC / Flyback Switching Regulator IC Positive or Negative, Isolation Capable Adjustable 1V 1 Output 2A (Switch) 8-SOIC (0.154", 3.90mm Width) Exposed Pad RoHS : Compliant |
| 2,350 | ||
| LT8304ES8E#TRPBF | Analog Devices Inc | IC REG FLYBACK ADJ 2A 8SOIC RoHS : Compliant |
| 2,290 | ||
| ICS8304AMLF | Integrated Device Technology Inc | LOW SKEW, 1-TO-4 LVCMOS / LVTTL FANOUT BUFFER RoHS : Compliant |
| 1,735 | ||
| ICS8304AMLFT | Integrated Device Technology Inc | IC CLK BUFFER 1:4 200MHZ 8SOIC RoHS : Compliant |
| 1,630 | ||
| AD8304ARU | Analog Devices Inc | 160 dB Range (100 pA -10 mA) Logarithmic Converter | IC LOGARITHM CONV 160DB 14-TSSOP RoHS : Not Compliant |
| 1,000 | ||
| AD8304ARU-REEL7 | Analog Devices Inc | 160 dB Range (100 pA -10 mA) Logarithmic Converter | IC LOGARITHMIC CONV 14-TSSOP RoHS : Not Compliant |
| 940 | ||
| AD8304ARUZ | Analog Devices Inc | IC LOGARITHMIC CONVERTER 14TSSOP / Logarithmic Converter IC Fiber Optics 14-TSSOP RoHS : Compliant |
| 920 | ||
| AD8304ARUZ-RL7 | Analog Devices Inc | IC LOGARITHM CONV 160DB 14-TSSOP / SP Amp LOG Amp Single R-R O/P 5.5V 14-Pin TSSOP T/R RoHS : Compliant |
| 900 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand