| Electronic Components Datasheet Search |
|
8293 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Future Electronics | 8293 | Heyco | RoHS : Compliant |
| 0 | |
![]() Verical | 829330-1 | TE Connectivity | Connector Accessories Cover Kit RoHS : Compliant |
| 5,750 | |
| 829394-5 | TE Connectivity | Conn Unshrouded Header HDR 10 POS 2.54mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 1,845 | ||
| 829309-8 | TE Connectivity | Conn Board Stacker HDR 16 POS 2.54mm Solder ST Top Entry Thru-Hole RoHS : Compliant |
| 1,150 | ||
| 829330-1 | TE Connectivity | Connector Accessories Cover Kit RoHS : Compliant |
| 1,080 | ||
| 8293 | Abbatron | Standoff Hex M/F 8-32-THD Brass Alloy 360 Nickel RoHS : Compliant |
| 575 | ||
| 829309-8 | TE Connectivity | Conn Board Stacker HDR 16 POS 2.54mm Solder ST Top Entry Thru-Hole RoHS : Compliant |
| 500 | ||
| 829330-1 | TE Connectivity | Connector Accessories Cover Kit RoHS : Compliant |
| 83 | ||
| 829386-5 | TE Connectivity | Backshell/Cable Clamp 45°/180° 4 Shell Size Bright Nickel Over Copper Acrylonitrile Butadiene Styrene RoHS : Compliant |
| 47 | ||
| 829330-1 | TE Connectivity | Connector Accessories Cover Kit RoHS : Compliant |
| 33 | ||
![]() Avnet Americas | 1587829-3 | TE Connectivity | - Bulk (Alt: 1587829-3) RoHS : Compliant |
| 5,900 | |
| 4-2232829-3 | TE Connectivity | Connector Shrouded Header 3 Position 2mm Solder Straight Surface Mount T/R - Bulk (Alt: 33AK4052) RoHS : Not Compliant |
| 0 | ||
| 8293 | 3M Interconnect | - Bulk (Alt: 7000002055) RoHS : Not Compliant |
| 0 | ||
| BWPS003838293R9K00 | Pulse Electronics Corporation | Inductor Power Shielded Wirewound 10% 100kHz 30Q-Factor Ferrite 1.2A 1515 T/R - Tape and Reel (Alt: BWPS003838293R9K00) RoHS : Compliant |
| 0 | ||
| 1-829315-1 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1-829315-1) RoHS : Compliant | 0 | |||
| 1554829-3 | TE Connectivity | FBIS-II REC ASSY 4 POS, PACKING - Tape and Reel (Alt: 1554829-3) RoHS : Not Compliant |
| 0 | ||
| 7100138293 | 3M Interconnect | RADIAL BRISTLE DISC, RB-ZB, 80, 2 IN X 3 - Bulk (Alt: 7100138293) RoHS : Not Compliant |
| 0 | ||
| 7789829300 | Weidmüller Interface GmbH & Co. KG | C300-36B-324B-2S-M25-30 - Bulk (Alt: 7789829300) RoHS : Not Compliant |
| 0 | ||
| BWPS00383829390M00 | Pulse Electronics Corporation | Inductor Power Shielded Wirewound 20% 100kHz 33Q-Factor Ferrite 0.46A 1515 T/R - Tape and Reel (Alt: BWPS00383829390M00) RoHS : Compliant |
| 0 | ||
| 282938-2 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 282938-2) RoHS : Compliant |
| 0 | ||
| 1338293-5 | TE Connectivity | - Bulk (Alt: 1338293-5) RoHS : Not Compliant | 0 | |||
| 5-829376-0 | TE Connectivity | - Bulk (Alt: 5-829376-0) RoHS : Compliant | 0 | |||
| SGM829-3.0XN6G/TR | SG Micro Corp | - Tape and Reel (Alt: SGM829-3.0XN6G/TR) RoHS : Not Compliant |
| 0 | ||
| BWPS00383829390K00 | Pulse Electronics Corporation | Inductor Power Shielded Wirewound 10% 100kHz 33Q-Factor Ferrite 0.46A 1515 T/R - Tape and Reel (Alt: BWPS00383829390K00) RoHS : Compliant |
| 0 | ||
| 2332829-3 | TE Connectivity | Daughter Card Module for 14 Position RF Coax Connectors Aluminum Alloy - Bulk (Alt: 2332829-3) RoHS : Not Compliant | 0 | |||
![]() Mouser Electronics | 35296484 | Aptiv PLC | Automotive Connectors SEAL CBL 1W CAVITY PNK RoHS : Compliant |
| 68,351 | |
| 35730037 | Aptiv PLC | Automotive Connectors ASM CONN 38 F CTS 280 630 OCS 1.2 SLD RoHS : Compliant |
| 12,976 | ||
| 35126372 | Aptiv PLC | Automotive Connectors ASM CONN 3 F CTS 120 SLD RoHS : Compliant |
| 11,992 | ||
| 35504789 | Aptiv PLC | Automotive Connectors LOCK SECONDARY NAT RoHS : Compliant |
| 9,072 | ||
| 35066115 | Aptiv PLC | Automotive Connectors LOCK SECONDARY TPA 8 VLT RoHS : Compliant |
| 9,000 | ||
| 35446053 | Aptiv PLC | Automotive Connectors TERM M H/P RoHS : Compliant |
| 1,260 | ||
| 35072868 | Aptiv PLC | Cable Mounting & Accessories SEAL CBL/CONN WN RED RoHS : Compliant |
| 1,000 | ||
| 35446052 | Aptiv PLC | Automotive Connectors TERM M H/P RoHS : Compliant |
| 1,000 | ||
| 35688753 | Aptiv PLC | Automotive Connectors SEAL CBL/CONN RoHS : Compliant |
| 999 | ||
| 33509693 | Aptiv PLC | Automotive Connectors ASM CONN 12 F MTS 0.64 YEL RoHS : Compliant |
| 799 | ||
| 33405007 | Aptiv PLC | Automotive Connectors ASM CONN 10 F SICMA-2 2.8 SICMA-3 1.5 SLD BASE 14 RoHS : Compliant |
| 211 | ||
| 8293 | Keystone Electronics Corp | Terminals 16/14 TERMINAL BLUE RoHS : Compliant |
| 126 | ||
| 33406300 | Aptiv PLC | Automotive Connectors ASM CONN 32 M DCS-2 1.5 2.8 SLD RoHS : Compliant |
| 120 | ||
| RKMV 4-594/5 M | Lumberg Automation | Sensor Cables / Actuator Cables |
| 4 | ||
| 8293 | Heyco | Spiral Wraps, Sleeves, Tubing & Conduit HF7 1-1/2 750' REEL GRAY RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 829394-3 | TE Connectivity | Conn Unshrouded Header HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 100 | |
![]() Newark | 4-2232829-3 | TE Connectivity | Conn, Header, 3Pos, 1Row, 2Mm, Smt; Connector Systems:Wire-To-Board; Pitch Spacing:2Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Surface Mount Straight; Product Range:Sgi2.0 Series Rohs Compliant: Yes RoHS : Compliant |
| 6,300 | |
| 4-2232829-3 | TE Connectivity | Conn, Header, 3Pos, 1Row, 2Mm, Smt; Conn |Te Connectivity 4-2232829-3 RoHS : Compliant |
| 5,400 | ||
| 1-178293-3 | TE Connectivity | Connector, Plug, 3Pos, 3.81Mm, Pcb; |Te Connectivity Amp 1-178293-3 RoHS : Compliant |
| 3,874 | ||
AD8293G160ARJZ-R7![]() | Analog Devices Inc | Instr Amp, 140Db, Sot-23-8; |Analog Devices, Inc. AD8293G160ARJZ-R7 RoHS : Compliant |
| 1,629 | ||
AD8293G160ARJZ-R7![]() | Analog Devices Inc | Instr Amp, 140Db, Sot-23-8; |Analog Devices, Inc. AD8293G160ARJZ-R7 RoHS : Compliant |
| 1,629 | ||
| 1-178293-2 | TE Connectivity | Connector, Header, 3Pos, 1Row, 3.81Mm; |Te Connectivity Amp 1-178293-2 RoHS : Compliant |
| 1,202 | ||
| 4-2232829-3 | TE Connectivity | Conn, Header, 3Pos, 1Row, 2Mm, Smt; Conn |Te Connectivity 4-2232829-3 RoHS : Compliant |
| 900 | ||
| 1829387 | Phoenix Contact | Terminal Block, Header, 6Pos, Th; |Phoenix Contact 1829387 RoHS : Compliant |
| 843 | ||
AD8293G160BRJZ-R7![]() | Analog Devices Inc | Instrumentation Amp, 500Hz, Sot-23; |Analog Devices, Inc. AD8293G160BRJZ-R7 RoHS : Compliant |
| 830 | ||
AD8293G160BRJZ-R7![]() | Analog Devices Inc | Instrumentation Amp, 500Hz, Sot-23; |Analog Devices, Inc. AD8293G160BRJZ-R7 RoHS : Compliant |
| 830 | ||
| PSG08293 | Pro-Signal | 6.35Mm Jack Socket, Mono, Panel, Pk2; |Pro Signal PSG08293 RoHS : Compliant |
| 19 | ||
| 8293 | Abbatron | Spacer/Standoff, Hex Brass 6.35Mm X 50.8Mm; Standoff Material:Brass; Thread Size - Metric:-; Thread Size - Imperial:8-32; Standoff Type:Hex Male-Female; Body Length:50.8Mm; Overall Length:60.325Mm; External Width:6.35Mm Rohs Compliant: Yes RoHS : Compliant |
| 7 | ||
| 1-178293-5 | TE Connectivity | Connector, Header, 3Pos, 1Row, 3.81Mm; |Te Connectivity Amp 1-178293-5 RoHS : Not Compliant |
| 2 | ||
| 8293 | 3M Interconnect | Particulate Respirator, Valved, P100; Safety Category:Niosh; Protection Class:P100; Respirator Type:Disposable; Product Range:Cool Flow 8000 Series Rohs Compliant: Na |3M 8293 RoHS : Not Compliant |
| 0 | ||
| 8293 | Keystone Electronics Corp | Crimp Lug; |Keystone 8293 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | AD8293G80ARJZ-R7![]() | Analog Devices Inc | Gain=80 R-R Zero Drift In Amp RoHS : Compliant |
| 13,675 | |
AD8293G80BRJZ-R7![]() | Analog Devices Inc | Gain=80 R-R Zero Drift In Amp RoHS : Compliant |
| 3,452 | ||
AD8293G160ARJZ-R7![]() | Analog Devices Inc | Gain=160 R-R Zero Drift In Amp RoHS : Compliant |
| 1,002 | ||
AD8293G160BRJZ-R7![]() | Analog Devices Inc | Gain=160 R-R Zero Drift In Amp RoHS : Compliant |
| 555 | ||
![]() RS | 0451015.MRL (7382933P) | Littelfuse Inc | FUSE, 15A FF NON-RESETTABLE, SURFACE MOUNT, 65 V |
| 362 | |
| 1788293 | RS Pro | PC-INSULATED DOUBLE CRIMP FEMALE DISCONN |
| 280 | ||
| PUN-H-6X1-GN (558293) | Festo | TUBING, POLYURETHANE, HYDROLYSIS RESISTANT, 6MM OD, GREEN, 50M COIL |
| 150 | ||
| 0829392 (ZBF 3 5:UNBEDRUCKT) | Phoenix Contact | TERMINAL BLOCK MARKER STRIP, WHITE, UNPRINTED, ZACK, ZB/ZBF SERIES |
| 31 | ||
| 2482938 | RS Pro | CYLINDRICAL ROLLER BEARING NU203-E-TVP3-C3 SINGLE ROW 17MM ID X 40MM OD X 12MM W |
| 12 | ||
| 7100053715 (50048011082931) | 3M | SCOTCH-BRITE GENERAL PURPOSE SCOUR PAD 96, 6 IN X 9 IN |
| 10 | ||
| 8293Q (50051138662146) | 3M | PROBED PARTICULATE RESPIRATOR 8293Q, P100 |
| 8 | ||
| RKMV 4-594/5 M (8293) | Lumberg Automation | CORDSET, M8 FEMALE STRAIGHT, 4 POLE, 5 METER, PVC, YELLOW, 8293 |
| 7 | ||
| 82935755 | WERMA SIGNALTECHNIK GMBH + CO KG | LED PERM./BLINK/ROT. BEACON RM 24VDC, YELLOW |
| 2 | ||
| 82937055 | WERMA SIGNALTECHNIK GMBH + CO KG | MONITORED BEACON, LED, PERMANENT, BM 24VDC, YELLOW |
| 2 | ||
| 2588293 | RS Pro | DC GEARED MOTOR 24V 100NMN 190RPM SPUR GEARHEAD IRON CORE 5MM DIAMETER |
| 1 | ||
| 6GM5M-78 (GMO-38293000|6GM5M-78|6GM5M-78) | Carling Technologies | SWITCH;TOGGLE;DPDT;(ON)-OFF-(ON);ROUND ACTUATOR;SEALED;NON-ILLUM;15A;125VAC;QC |
| 1 | ||
| 8293 | Keystone Electronics Corp | QUICK FIT TERMINAL FULLY INSULATED NYLON RoHS : Compliant |
| 0 | ||
| 8293 | Heyco | HF7 1-1/2 750FT REEL GRAY RoHS : Compliant |
| 0 | ||
| 8293 | HH Smith | STANDOFF; HEX; BRASS; MALE-FEMALE; 8-32 THREAD; 1/4" OD; 2" BODY LENGTH |
| 0 | ||
![]() Bisco Industries | NAS1829-3C10 | RAF Electronic Hardware | 4,470 | |||
| NAS1829-3A03 | RAF Electronic Hardware | 2,447 | ||||
| NAS1829-3A08 | RAF Electronic Hardware | 2,402 | ||||
| NAS1829-3C03 | RAF Electronic Hardware | 1,117 | ||||
| 8293-0-15-01-06-27-40-0 | Mill-Max Mfg Corp | 394 | ||||
| MS17829-3C | ESNA | 288 | ||||
| NAS1829-3C16 | RAF Electronic Hardware | 178 | ||||
| NAS1829-3A12 | RAF Electronic Hardware | 57 | ||||
| NAS1829-3C04 | RAF Electronic Hardware | 45 | ||||
| NAS1829-3A03 | NAS SPACERS/STANDOFFS/HANDLES | 5 | ||||
| NAS1829-3C09 | Lyn-Tron Inc | 4 | ||||
| NAS1829-3C08 | NAS SPACERS/STANDOFFS/HANDLES | 2 | ||||
| NAS1829-3C03 | NAS SPACERS/STANDOFFS/HANDLES | 2 | ||||
![]() Onlinecomponents.com | 8293 | HH Smith | Brass Male/Female Hex Standoff - 8-32 Thread - 2" Length. RoHS : Compliant |
| 575 | |
| 8293 | 3M | 3M™ Dissipative Vinyl 3 Layer Floor Mat (Premium Performance)_ 8293 UPC#00051135175958 RoHS : Compliant |
| 0 | ||
| 8293 | Heyco | PVC Corrugated Conduit 1-1/2 Dia - 750 foot REEL - Gray RoHS : Compliant |
| 0 | ||
| 8293 | Lumberg Automation | RKMV 4-594/5 M RoHS : Compliant |
| 0 | ||
| 91525-8293 | Molex | 0.50mm Pitch LaneLink™ I/O Latch Receptacle, 12 Lane, Cx4 Ethernet, 24 Circuits, 4 Solder Posts, Metal Gasket, Tape and Reel Packaging, 3.60mm PCB Thickness RoHS : Compliant |
| 0 | ||
| C115288-8293 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 8293-BSS | Marinco Electrical Group | Contura Actuator Removal Tool RoHS : Compliant |
| 0 | ||
| 025-8293-12 | TE Connectivity | 025-8293-12 RoHS : Compliant |
| 0 | ||
| CWT-3802-180-8293 | TE Connectivity | CWT-3802-180-8293 |
| 0 | ||
| 8293-832-SS-20 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 060-8293-02 | Honeywell Test and Measurement | RoHS : Compliant |
| 0 | ||
| 8293-832-SS | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD8293G160ARJZ-R7![]() | Analog Devices Inc | Op Amp Standard SOT-23-8 T/R RoHS : Compliant |
| 600 | |
AD8293G160ARJZ-RL![]() | Analog Devices Inc | Op Amp Standard SOT-23-8 T/R RoHS : Compliant |
| 230 | ||
AD8293G80BRJZ-R7![]() | Analog Devices Inc | Op Amp Instrumentation SOT-23-8 T/R RoHS : Compliant |
| 509 | ||
AD8293G160BRJZ-R7![]() | Analog Devices Inc | Op Amp Standard SOT-23-8 T/R RoHS : Compliant |
| 8 | ||
AD8293G80ARJZ-R7![]() | Analog Devices Inc | Op Amp Instrumentation SOT-23-8 T/R RoHS : Compliant |
| 17 | ||
A8293SESTR-T![]() | Allegro MicroSystems LLC | Switching Regulator, Current-mode, 384kHz Switching Freq-Max, BCDMOS RoHS : Compliant |
| 126,500 | ||
| LM18293N | National Semiconductor Corporation | Half Bridge Based Peripheral Driver, 4 Driver, 2A, BIPolar, PDIP16 RoHS : Not Compliant |
| 28,360 | ||
![]() Sager | 8293 | Keystone Electronics Corp | Terminals 16/14 TERMINAL BLUE RoHS : Compliant |
| 0 | |
| 1-1338293-0 | TE Connectivity | Crimpers / Crimping Tools FLOATING SHEAR |
| 0 | ||
| 1-829315-1 | TE Connectivity | Headers & Wire Housings 2X11P MOD2 STIFTLEI RoHS : Compliant | 0 | |||
| 1829369 | IDEC Corporation | MEC SWITCH 10G |
| 0 | ||
| 0829337 | Phoenix Contact | Wire Labels & Markers US-WMTB (44X15) VT RoHS : Compliant | 0 | |||
| CA1-X0-09-829-311-C | Carling Technologies | Circuit Breakers | 0 | |||
| 282938-2 | TE Connectivity | RF Connector Accessories FEMALE/FEMALE SPLICE RoHS : Not Compliant |
| 0 | ||
| IEG6-28293-1-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CA2-X0-02-829-311-C | Carling Technologies | Circuit Breakers | 0 | |||
| CA2-X0-16-829-321-CF | Carling Technologies | Circuit Breakers | 0 | |||
| 8560058293 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| AAA8293-00 | TE Connectivity | TE Connectivity 91D1-10-14-1-C-HE300 | 0 | |||
| 0829320 | Phoenix Contact | Labels & Industrial Warning Signs US-WMTB (24X5) RD RoHS : Compliant |
| 0 | ||
| 0829321 | Phoenix Contact | Labels & Industrial Warning Signs US-WMTB (24X5) OG RoHS : Compliant |
| 0 | ||
| 1338293-5 | TE Connectivity | Bench Top Tools FLOATING SHEAR | 0 | |||
![]() TME | 2-178293-2 | TE Connectivity | Connector: wire-board; male; PIN: 3; angled; soldering,THT; 250V RoHS : Compliant |
| 5,244 | |
| 1-178293-2 | TE Connectivity | Connector: wire-board; male; PIN: 3; angled; THT; Inom: 12A; 250V RoHS : Compliant |
| 1,380 | ||
| 1-829376-0 | TE Connectivity | Connector: wire-board; female; PIN: 10; Inom: 3A; straight; IDC RoHS : Compliant |
| 1,000 | ||
| 1445829-3 | TE Connectivity | Connector: circular; plug; male,female; PIN: 5; 5.9A; unshielded RoHS : Compliant |
| 100 | ||
| 829330-1 | TE Connectivity | Protection cover; AMPMODU RoHS : Compliant |
| 33 | ||
| 336.829.3 | ANAMET Electrical Inc | Insulating tube; fiberglass; -55÷260°C; L: 30m; Øout: 35mm; Size: 29 |
| 30 | ||
| 1201088293 | Molex | Patch cord; Cat 5; both sides; TPU; green; 22AWG; IP20; -25÷85°C RoHS : Compliant |
| 20 | ||
| 558293 | Festo | Pneumatic tubing; -0.95÷10bar; PUN-H; Tube in.diam: 4mm; green |
| 18 | ||
| 09061482935 | HARTING Technology Group | Connector: DIN 41612; socket; male; PIN: 48; angled; THT RoHS : Compliant |
| 0 | ||
| 2829/3 WH005 | Alpha Wire | Wire; Alpha Essential High Low Temperature; 3x18AWG; stranded |
| 0 | ||
| 09061482932 | HARTING Technology Group | Connector: DIN 41612 |
| 0 | ||
| 77 9829 3434 50003-0100 | Binder UK Ltd | Cable: for sensors; PIN: 3; M12 male angled,M12 female angled x2 |
| 0 | ||
| 1829374 | Phoenix Contact | Connector: pluggable terminal block; socket; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 10058293 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 7; THT; 3A; 250V; 1x7 |
| 0 | ||
| 09051482931 | HARTING Technology Group | Contact; male; gold-plated; THT; 6A; angled; UL94V-0; -55÷125°C RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 8293775 | TE Connectivity | RECT CONN Header, Breakaway Male Pin Through Hole 10 POS 2.54mm Solder Gold RoHS : Not Compliant | 364 | ||
| 8293776 | TE Connectivity | RECT CONN Header, Breakaway Male Pin Through Hole 12 POS 2.54mm Solder Gold RoHS : Not Compliant | 362 | |||
| BFC233829304 | Vishay Intertechnologies | INTERFERENCE SUPPRESSION FILM CAPACITOR Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 0.068uF, Through Hole Mount, 6920 RoHS : Compliant | 300 | |||
![]() Interstate Connecting Components | 319-0808-293 | MISC MIL-AERO | #8 PIN POWER CONTACT | 3 | ||
| 001608293A8 | ITT Interconnect Solutions | 46790-28T108 | 0 | |||
| 1-1338293-0 | TE Connectivity | FLOATING SHEAR |
| 0 | ||
| 1554829-3 | TE Connectivity | FBIS-II REC ASSY 4 POS, PACKIN | 0 | |||
| 282938-2 | TE Connectivity | FEMALE/FEMALE SPLICE RoHS : Not Compliant |
| 0 | ||
| 00160829303 | ITT Interconnect Solutions | 46790-28T3 | 0 | |||
| 9488293001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC100G1121-0.75-0/9-0 RoHS : Compliant | 0 | |||
| CN8293-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC222K132-25/225-0-CS844 | 0 | |||
| 88-527829-35S | Amphenol Aerospace | 0 | ||||
| 2668293001 | TE Connectivity | VG-95218-T028-D018CK3100 RoHS : Compliant | 0 | |||
| 4-2232829-3 | TE Connectivity | SGI2.0 HEADER ASSEMBLY SMT 3P, RoHS : Compliant |
| 0 | ||
| DS07-19-2S-8-293 | TE Connectivity | PLUG ASSY | 0 | |||
| 62829-3 | TE Connectivity | 156 SHUR PLUG 018 PTPBR RoHS : Compliant |
| 0 | ||
| 2278293-1 | TE Connectivity | COVER WITH SEAL, HARDWIRED BOX | 0 | |||
| 3-2382932-1 | TE Connectivity | HVA630 INDIVIDUAL TYPE 5P COVE RoHS : Compliant | 0 | |||
![]() PEI Genesis | 10-829358-014 | Amphenol Corporation |
| 0 | ||
| J1829-34 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02829-37 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02829-32 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02829-36 | SOURIAU-SUNBANK |
| 0 | |||
| 5929829-34 | SOURIAU-SUNBANK |
| 0 | |||
| 5929829-36 | SOURIAU-SUNBANK |
| 0 | |||
| 5929829-35 | SOURIAU-SUNBANK |
| 0 | |||
| S2829-36R34 | SOURIAU-SUNBANK |
| 0 | |||
| 5929829-30 | SOURIAU-SUNBANK |
| 0 | |||
| 5929829-32 | SOURIAU-SUNBANK |
| 0 | |||
| 88-527829-35F | Amphenol Corporation |
| 0 | |||
| BPGSRP282932W-3 | Amphenol PCD |
| 0 | |||
| 5929829-31 | SOURIAU-SUNBANK |
| 0 | |||
| 5929829-33 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 3-2069829-3 | TE Connectivity | Connectors RoHS : Compliant |
| 19,008 | |
| 829330-1 | TE Connectivity | connector accessories RoHS : Compliant |
| 4,563 | ||
| 2-178293-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,461 | ||
| 2154829-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,122 | ||
| 829394-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,218 | ||
| 829309-8 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 759 | ||
| 1-829376-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 660 | ||
| BU-1682935 | Mueller Electric Company | CBL FMALE TO WIRE LEAD 5P SHLD |
| 267 | ||
| 84048293 | HUBER+SUHNER | RF Component RoHS : Compliant |
| 256 | ||
| 1-178293-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 228 | ||
| ZW-25-12-L-D-618-293 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 201 | ||
| 1-178293-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 179 | ||
| 1-178293-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 117 | ||
| 829386-5 | TE Connectivity | Connectors |
| 31 | ||
| 2829399-2 | TE Connectivity | Connectors |
| 13 | ||
![]() Richardson RFPD | 282938-2 | TE Connectivity | Conn Type F Adapter RCP/RCP Tin-Lead RoHS : Compliant |
| 0 | |
| SI5332DD08293-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| R128293702W | Radiall | Conn BMA 0Hz to 18GHz 50Ohm Solder ST Cable Mount RoHS : Not Compliant |
| 0 | ||
| SI5332DD08293-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| 97F8293 | Genteq | Oil Filled Capacitor RoHS : Compliant | 0 | |||
AD8293G80ARJZ-R7![]() | Analog Devices Inc | INST Amp Single R-R O/P 5.5V 8-Pin SOT-23 T/R RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 3-2069829-3 | TE Connectivity | INSTOCK RoHS : Compliant | 37,440 | ||
| 1734829-3 | TE Connectivity | INSTOCK RoHS : Compliant | 22,737 | |||
| 1445829-3 | TE Connectivity | INSTOCK RoHS : Compliant | 12,243 | |||
| 829330-1 | TE Connectivity | INSTOCK RoHS : Compliant | 9,191 | |||
| 2-178293-2 | TE Connectivity | INSTOCK RoHS : Compliant | 7,863 | |||
| 182930-1 | TE Connectivity | INSTOCK RoHS : Compliant | 4,133 | |||
| LCH8293476441HQ604 | Kycon Inc | INSTOCK | 3,800 | |||
| 2-829376-6 | TE Connectivity | INSTOCK RoHS : Compliant | 3,095 | |||
| LCH8293476 | INSTOCK | 1,701 | ||||
| 1-829376-0 | TE Connectivity | INSTOCK RoHS : Compliant | 1,300 | |||
| 7182-9331-30 | INSTOCK | 1,266 | ||||
| 0-0829393-6 | TE Connectivity | INSTOCK | 898 | |||
| 7282-9392-40 | INSTOCK | 10 | ||||
![]() Avnet Abacus | 1829387 | Phoenix Contact | DFKMC 15 6GF381 DFKMC156GF381 (Alt: 1829387) RoHS : Compliant | 150 | ||
| 1829358 | Phoenix Contact | Terminal Block Header 381 mm 3 Ways 8 A 160 V Through Hole Vertical (Alt: 1829358) RoHS : Compliant | 100 | |||
| 1829361 | Phoenix Contact | DFKMC 15 4GF381 DFKMC154GF381 (Alt: 1829361) RoHS : Compliant | 50 | |||
| 1829345 | Phoenix Contact | DFKMC 15 2GF381 DFKMC152GF381 (Alt: 1829345) RoHS : Compliant | 50 | |||
| 829377-6 | TE Connectivity | 6P MOD2 STIFTLEIST (Alt: 829377-6) RoHS : Compliant | 0 | |||
| 2278293-1 | TE Connectivity | Cover for M7C Fuse and Relay Box Assembly (Alt: 2278293-1) RoHS : Compliant | 0 | |||
| 2007829-3 | TE Connectivity | (Alt: 2007829-3) RoHS : Compliant | 0 | |||
| 5-829376-0 | TE Connectivity | (Alt: 5-829376-0) RoHS : Compliant | 0 | |||
| 9488293001 | TE Connectivity | (Alt: 9488293001) RoHS : Compliant | 0 | |||
| 1-829376-4 | TE Connectivity | (Alt: 1-829376-4) RoHS : Compliant | 0 | |||
| 1-178293-5 | TE Connectivity | Conn Power M 3 POS 381mm Solder RA ThruHole 3 Terminal 1 Port Tube (Alt: 1-178293-5) RoHS : Compliant | 0 | |||
| 4-2232829-3 | TE Connectivity | Connector Shrouded Header 3 Position 2mm Solder Straight Surface Mount TR (Alt: 4-2232829-3) RoHS : Compliant | 0 | |||
| 3-2069829-3 | TE Connectivity | Connector Housing Plug 6Position 25mm Straight Panel Mount Yellow (Alt: 3-2069829-3) RoHS : Compliant | 0 | |||
| MAL211829339E3 | Vishay Intertechnologies | 33uF 100V 10x25 125C 4000h - Tape and Reel (Alt: MAL211829339E3) RoHS : Compliant | 0 | |||
| BWPS00383829331K00 | Pulse Electronics Corporation | Inductor Power Shielded Wirewound 10 100kHz 33QFactor Ferrite 016A 02A 1515 TR - Tape and Reel (Alt: BWPS00383829331K00) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 1587829-3 | TE Connectivity | (Alt: 1587829-3) RoHS : Compliant | 0 | ||
![]() Avnet Silica | 100-438293 | AMD | AMD WX2100 Lexa Pro PCIe Board (Alt: 100-438293) RoHS : Compliant | 0 | ||
| C18293_SPORT-2X2-S1-HT | LEDIL | MultiLens 10 50 X 50 X 16mm PMMA Clear Box (Alt: C18293_SPORT-2X2-S1-HT) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | 82932055 | Wermer | 3 | |||
![]() Component Electronics, Inc | D8293 | Intel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 2 | ||
![]() DB Roberts | 8293 | Heyco | HF7 1-1/2 750' REEL GRAY RoHS : Compliant | 0 | ||
| 8293-1032-SS-26 | RAF Electronic Hardware | 0 | ||||
| RP-348-293 | SHEREX FASTENING SO | 0 | ||||
| 3BT-P8293-00 | Acumnet / Camcar | 1/4-10 X 1 1/4 PN HD TX PLUS | 0 | |||
| 8293-832-SS-20 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | SC668293VDFT | NXP Semiconductors | MCXN11 184BGA (Alt: SC668293VDFT) RoHS : Compliant | 100 | ||
| C18293_SPORT-2X2-S1-HT | LEDIL | MultiLens 10 50 X 50 X 16mm PMMA Clear Box (Alt: C18293_SPORT-2X2-S1-HT) RoHS : Compliant | 0 | |||
| 67-22S/G1C-D1525L4L82936Z6/2T | Everlight Electronics Co Ltd | (Alt: S10C008455) RoHS : Compliant | 0 | |||
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | Low Power LEDs none SSL (Alt: S10C007518) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 082-93-002/020 | Amphenol SV Microwave | Connector Misc | 124 | ||
| 23A02829-32 | Cooper Interconnect | Backshells & Ac | 0 | |||
| 23A02829-36 | Cooper Interconnect | Backshells & Ac | 0 | |||
| 2450R 82930003 | Honeywell Sensing and Control | Thermistor |
| 0 | ||
| 5929829-34 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| 5929829-35 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| 23A02829-33 | Cooper Interconnect | Connector Acc | 0 | |||
| 23A02829-34 | Cooper Interconnect | Connector Acc | 0 | |||
![]() Maritex | AD8293G160ARJZ-R7![]() | Analog Devices Inc | Instrumentation Amplifiers; AD8293G160ARJZ-R7; ANALOG DEVICES; 8; 1; SOT; 3 �V RoHS : Compliant |
| 3,106 | |
| 1829345 | Phoenix Contact | HDC Plug-In Modules; 1829345; PHOENIX CONTACT; Tin; 1; Panel; 2 RoHS : Compliant |
| 1,455 | ||
| 1829361 | Phoenix Contact | HDC Plug-In Modules; 1829361; PHOENIX CONTACT; Tin; 1; Panel; 4 RoHS : Compliant |
| 130 | ||
![]() Master Electronics | 8293 | HH Smith | Brass Male/Female Hex Standoff - 8-32 Thread - 2 Length. RoHS : Compliant |
| 575 | |
| FW-02-03-G-D-088-293 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFMD-03-D-82.93-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1-1338293-0 | TE Connectivity | FLOATING SHEAR RoHS : Compliant |
| 0 | ||
| 1-829315-1 | TE Connectivity | 2X11P MOD2 STIFTLEI MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1829369 | APEM Inc | MEC SWITCH 10G RoHS : Compliant |
| 0 | ||
| 0829337 | Phoenix Contact | Cable marker - Card - violet - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: thread on - cable diameter: > 4 mm - lettering field size: 44 x 15 mm - Number of individual labels: 12 RoHS : Compliant |
| 0 | ||
| 1554829-3 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| Z48293 | ITT Interconnect Solutions | Conn Circular M 7 POS Crimp ST Panel Mount 7 Terminal 1 Port Automotive RoHS : Not Compliant |
| 0 | ||
| 282938-2 | TE Connectivity | FEMALE/FEMALE SPLICE MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| C115288-8293 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| ZPF000000000008293 | TE Connectivity | 983-6KE 24-61 SN-L MOQ Reduction RoHS : Compliant |
| 0 | ||
| 0829320 | Phoenix Contact | Cable marker - Card - red - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: thread on - cable diameter: > 13 mm - lettering field size: 24 x 5 mm - Number of individual labels: 35 RoHS : Compliant |
| 0 | ||
| 0829321 | Phoenix Contact | Cable marker - Card - orange - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: thread on - cable diameter: > 13 mm - lettering field size: 24 x 5 mm - Number of individual labels: 35 RoHS : Compliant |
| 0 | ||
| 1338293-5 | TE Connectivity | FLOATING SHEAR RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | 09061482935 | HARTING Technology Group | DIN 41612 Connectors DIN PWR F048MS-3 0C1-1-V48 RoHS : Compliant |
| 50 | |
| 1982930000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks BLF 5.08HC/06/270F SN OR BX RoHS : Compliant |
| 50 | ||
| 1829345 | Phoenix Contact | Pluggable Terminal Blocks 2 Pos 3.81mm pitch Feed Through Header RoHS : Compliant |
| 50 | ||
| 1829390 | Phoenix Contact | Pluggable Terminal Blocks 7 Pos 3.81mm pitch Feed Through Header RoHS : Compliant |
| 50 | ||
| BU-1682935 | Mueller Electric Company | Sensor Cables / Actuator Cables CBL FMALE TO WIRE LEAD 5P SHLD |
| 10 | ||
| 82930002 | Crouzet | Stepper Motors 2PH 22.3 OHM PAL 12 |
| 8 | ||
| 82930015 | Crouzet | Stepper Motors 4PH 32 OHM PAL 12 AX |
| 4 | ||
| 1829361 | Phoenix Contact | PCB Header, Solder/Slip-on, 3.81mm 16AWG 160V 8A, 1row 4 Position, COMBICON DFK-MC Series RoHS : Compliant |
| 0 | ||
| 182930-1 | TE Connectivity | Black Thermoplastic Cable Clamp; 28.58mm Bundle Diameter RoHS : Compliant |
| 0 | ||
| 1682935 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-1.5-PUR M12FS SH RoHS : Compliant |
| 0 | ||
| 1829358 | Phoenix Contact | PCB Header, Male, Solder/Slip-on, 3.81mm 16AWG 160V 8A, 1row 3 Pos, DFK-MC 1,5/ 3-GF-3,81 RoHS : Compliant |
| 0 | ||
| 1829374 | Phoenix Contact | PCB header, Male, Solder/Slip-on 3.81mm 16AWG 160V 8A, 1row 5 Position, Combicon Control Series RoHS : Compliant |
| 0 | ||
| 09051482931 | HARTING Technology Group | Conn Backplane M 48 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0829-36 | Pasternack Enterprises |
| 142 | ||
| PE3W08293 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to N Female Bulkhead Cable Using LMR-400 Coax. PE3W08293 is a TNC male to N female bulkhead cable using LMR-400 coax. This Pasternack TNC male to N female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08293 TNC male to N female bulkhead cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08293/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using LMR-400 Coax with HeatShrink. PE3W08293/HS is a N female bulkhead to TNC male cable using LMR-400 coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08293/HS N female bulkhead to TNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C8293 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293 can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293 can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W18293LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Right Angle Cable Using LMR-100-FR Coax with HeatShrink, LF Solder. PE3W18293LF/HS is a N male right angle to TNC male right angle cable using LMR-100A-FR coax. This Pasternack N male right angle to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18293LF/HS N male right angle to TNC male right angle cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33829-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMB Plug Right Angle Cable 36 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to SMB plug right angle cable 36 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB plug right angle cable 36 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMB cable connection on the other. Our SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. PE33829-36 can also be known as a SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE33829-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33829-36 can also be used in the other direction and will be right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug right angle cable 36 inch length using RG316-DS coax. |
| 0 | ||
| PE3829-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female Cable 36 Inch Length Using RG402 Coax., Radio frequency assembly N male to N female cable 36 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable 36 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3829-36, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3829-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3829-36 can also be used in the other direction and will be type N female to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable 36 inch length using RG402 coax. |
| 0 | ||
| PE3C7829-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 36 inches. 4.3-10 Male to 4.3-10 Female Bulkhead Low PIM Cable 36 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male to 4.3-10 female bulkhead low PIM cable 36 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 female bulkhead low PIM cable 36 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 bulkhead cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7829-36, can also be known as a low PIM 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7829-36 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7829-36 can also be used in the other direction and will be 4.3-10 female bulkhead to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 female bulkhead low PIM cable 36 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8293-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-100CM can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-100CM can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8293-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-12 can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-12 can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8293-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-150CM can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-150CM can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8293-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-200CM can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-200CM can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8293-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-24 can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-24 can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8293-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-36 can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-36 can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8293-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.1/9.5 Mini DIN Male to N Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a type N cable connection on the other. Our low PIM 4.1/9.5 mini DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8293-48 can also be known as a low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8293-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to type N male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to type N plug cable assembly PE3C8293-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8293-48 can also be used in the other direction and will be a type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 2-178293-2 | TE Connectivity | DYNAMIC D3100 HDR H 3P ASSY PdNi PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 2-178293-2 | Internal Number: 2-178293-2 | TE Connectivity RoHS : Compliant |
| 5,298 | |
| 1-178293-2 | TE Connectivity | DYNAMIC D3100 HDR H 3P ASSY PdNi & Au PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178293-2 | Internal Number: 1-178293-2 | TE Connectivity RoHS : Compliant |
| 3,543 | ||
| 1-178293-5 | TE Connectivity | DYNAMIC D3100 HDR H 3P ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178293-5 | Internal Number: 1-178293-5 | TE Connectivity RoHS : Compliant |
| 3,341 | ||
| 1-178293-3 | TE Connectivity | DYNAMIC D3100 HDR H 3P ASSY PdNI PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178293-3 | Internal Number: 1-178293-3 | TE Connectivity RoHS : Compliant |
| 2,272 | ||
![]() Vyrian | AD8293G80BRJZ-R7![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 30uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 11,991 | ||
AD8293G160BRJZ-R7![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 20uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 11,773 | |||
AD8293G160ARJZ-RL![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 50uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 10,182 | |||
| A8293SESTR-T | Allegro MicroSystems | Switching Regulator, Current-mode, 384kHz Switching Freq-Max, BCDMOS | 8,957 | |||
AD8293G80ARJZ-RL![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 50uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 8,642 | |||
| 5962-00-632-8293 | Texas Instruments | AND-OR-Invert Gate, TTL, CDIP14 RoHS : Not Compliant | 7,803 | |||
AD8293G160BRJZ-R2![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 20uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 7,408 | |||
AD8293G80BRJZ-RL![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 30uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 6,798 | |||
| CT8G4RFS8293 | Micron Technology, Inc | 6,735 | ||||
AD8293G160ARJZ-R7![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 50uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 6,371 | |||
| CT32G4RFD8293 | Micron Technology, Inc | 6,159 | ||||
AD8293G80ARJZ-R2![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 50uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 5,843 | |||
AD8293G80BRJZ-R2![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 30uV Offset-Max, 500MHz Band Width, PDSO8 RoHS : Compliant | 5,728 | |||
| CT16G4RFD8293 | Micron Technology, Inc | 4,706 | ||||
| CT8G4RFS8293-2G9E1 | Micron Technology, Inc | 3,904 | ||||
![]() Waytek, Inc. | 148293-73 | General Cable Technologies Corporation | 2/0 GA SGX Red Cross-Link Bare Copper Battery Cable -51C to 125C 1330/30 Strand |
| 250 | |
![]() Win Source Electronics | RT8293AHZSP | Richtek Technology Corp | IC REG BUCK ADJUSTABLE 3A 8SOP / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 8-SOIC (0.154", 3.90mm Width) Exposed Pad RoHS : Compliant |
| 43,689 | |
| RT8293BHGSP | Richtek Technology Corp | IC REG BUCK ADJ 3A SYNC 8SOP / Conv DC-DC 4.5V to 23V Synchronous Step Down Single-Out 0.8V to 15V 3A 8-Pin SOP EP RoHS : Compliant |
| 31,265 | ||
| RT8293BHZSP | Richtek Technology Corp | IC REG BUCK ADJUSTABLE 3A 8SOP RoHS : Compliant |
| 16,345 | ||
A8293SESTR-T![]() | Allegro MicroSystems LLC | LNB Supply and Control Voltage Regulator 20-Pin QFN EP T/R / IC REG LNB BOOST/LINEAR 20QFN RoHS : Compliant |
| 13,710 | ||
| AD8293G80ARJZ | Analog Devices Inc | ADI Gain=80 R-R Zero Drift In Amp |
| 2,500 | ||
AD8293G80ARJZ-RL![]() | Analog Devices Inc | Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain | IC INST AMP 1 CIRCUIT SOT23-8 RoHS : Compliant |
| 2,500 | ||
AD8293G80ARJZ-R2![]() | Analog Devices Inc | Low Cost, Zero-Drift In-Amp with Filter and Fixed Gain | IC INST AMP 1 CIRCUIT SOT23-8 RoHS : Compliant |
| 2,320 | ||
AD8293G80ARJZ-R7![]() | Analog Devices Inc | IC OPAMP INSTR 500HZ RRO SOT23-8 RoHS : Compliant |
| 2,290 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |