| Electronic Components Datasheet Search |
|
8181 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 8-31818-1 | TE Connectivity | SOLIS BUTT 22-16 COMM 22-18MIL RoHS : Compliant |
| 1,318 | |
| WHU18-1818-120 | Amphenol Cable & Interconnect Technologies | Cable Assembly Coaxial 3.05m Type N to Type N M-M RoHS : Compliant |
| 8 | ||
| 1818181500 | Weidmüller Interface GmbH & Co. KG | Cable Assembly 19 Position M23 Circular Receptacle PUR 0.34mm2 to 0.75mm2 15m RoHS : Compliant |
| 0 | ||
| 77315-818-13LF | Amphenol FCi | BERGSTIK-77315-818-13LF RoHS : Compliant |
| 0 | ||
| 77313-818-12LF | Amphenol FCi | Unshrouded Header - Male Pin - 12 Position - 2 Rows - 0.100 (2.54mm) Pitch - 3A - 1500V - Push-Pull - Solder Termination - Through Hole. RoHS : Compliant |
| 0 | ||
| 701781816 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| RLB0608-181KL | Bourns Inc | Inductor Power Wirewound 180uH 10% 796KHz 50Q-Factor Ferrite 235mA 2.3Ohm DCR RDL Bag RoHS : Compliant |
| 0 | ||
| FW0605GD248181APFR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ARC6-08-18.1-LU-LD-2-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-148-181 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-088-181 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-03-05-G-D-248-181-A-FR | Samtec Inc | FLEXIBLE MICRO BOARD STAC RoHS : Compliant |
| 0 | ||
| FW-04-05-G-D-248-181 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-168-181 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-098-181 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Verical | 818143-A9531KF | Vishay Intertechnologies | 818143-A9531KF |
| 377 | |
| 818192-2 | TE Connectivity | Crimper, Insulation (O) RoHS : Not Applicable |
| 11 | ||
![]() Avnet Americas | 738B-14.31818-12-T1 | Fox Electronics | - Tape and Reel (Alt: 738B-14.31818-12-T1) RoHS : Compliant | 8,000 | ||
| WSHM28181L000FEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSHM28181L000FEA) RoHS : Compliant |
| 3,500 | ||
| BFC233818134 | Vishay Intertechnologies | MKP 338 1 330nF ?10% 440Vac X1 - Bulk (Alt: BFC233818134) RoHS : Compliant |
| 900 | ||
| 77313-818-12LF | Amphenol Corporation | - Bulk (Alt: 28AH8916) RoHS : Compliant |
| 0 | ||
| SIT1408BI-71-18N-68.181810D | SiTime Corporation | OSCILLATOR, SIT1408, -40 to 85C, 2016, 20ppm, 1.8V, 68.18181MHz, OE, T&R - Tape and Reel (Alt: SIT1408BI-71-18N-68.181810D) RoHS : Compliant |
| 0 | ||
SIT8008BI-71-18E-68.181810E![]() | SiTime Corporation | - Tape and Reel (Alt: SIT8008BI-71-18E-68.181810E) RoHS : Compliant |
| 0 | ||
| SIT8008AI-71-18E-68.181810E | SiTime Corporation | - Tape and Reel (Alt: SIT8008AI-71-18E-68.181810E) RoHS : Compliant |
| 0 | ||
| SIT8008AI-71-18E-68.181810D | SiTime Corporation | - Tape and Reel (Alt: SIT8008AI-71-18E-68.181810D) RoHS : Compliant |
| 0 | ||
SIT8008BI-71-18E-68.181810D![]() | SiTime Corporation | - Tape and Reel (Alt: SIT8008BI-71-18E-68.181810D) RoHS : Compliant |
| 0 | ||
| SIT1408BI-71-18N-68.181810E | SiTime Corporation | OSCILLATOR, SIT1408, -40 to 85C, 2016, 20ppm, 1.8V, 68.18181MHz, OE, T&R - Tape and Reel (Alt: SIT1408BI-71-18N-68.181810E) RoHS : Compliant |
| 0 | ||
| 1818181000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1818181000) RoHS : Compliant |
| 0 | ||
| 1818181500 | Weidmüller Interface GmbH & Co. KG | Cable Assembly 19 Position M23 Circular Receptacle PUR 0.34mm2 to 0.75mm2 15m - Bulk (Alt: 1818181500) RoHS : Not Compliant |
| 0 | ||
| 781-8110-17 A836 | TE Connectivity | - Bag (Alt: ZPF000000000202853) RoHS : Compliant |
| 0 | ||
| A18181-160 | Qnity Laird | Hybrid Thermal/EMI Absorber for High-Power ICs/Heat Sinks 18" x 18" x 0.06" Dark Gray - Bulk (Alt: A18181-160) RoHS : Compliant |
| 0 | ||
| 77313-818-12LF | Amphenol Corporation | - Bag (Alt: 77313-818-12LF) RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 818143-A9531KF | Vishay Intertechnologies | 818143-A9531KF |
| 377 | |
![]() Newark | 2408818-1 | TE Connectivity | Rect Power Housing, Rcpt, 1Pos, 6.2Mm; |Te Connectivity Amp 2408818-1 RoHS : Compliant |
| 2,500 | |
| DS1818-10+ | Analog Devices Inc | Mpu Supervisor, Econoreset, 85Deg C; |Analog Devices, Inc. DS1818-10+ RoHS : Compliant |
| 1,004 | ||
| 77313-818-12LF | Amphenol Communications Solutions | Conn, Header, 12Pos, 2Row, 2.54Mm, Th; |Amphenol Communications Solutions 77313-818-12LF RoHS : Compliant |
| 964 | ||
| MAL211818101E3 | Vishay Intertechnologies | Aluminium Electrolytic Capacitor, 118 Ah; |Vishay MAL211818101E3 RoHS : Compliant |
| 871 | ||
| MAL211818101E3 | Vishay Intertechnologies | Cap Alu Elec, 100Uf, 63V, ±20%; |Vishay MAL211818101E3 RoHS : Compliant |
| 680 | ||
| 4-1703818-1 | TE Connectivity | Automotive Housing, Plug, 4Pos, Blue; |Te Connectivity Amp 4-1703818-1 RoHS : Compliant |
| 467 | ||
| 15DYS818-120150W-2 | Ideal Power Inc | Adapter, Ac-Dc, 1 Output, 12V, 1.5A; |Ideal Power 15DYS818-120150W-2 RoHS : Compliant |
| 113 | ||
| FMCA2818-12 | Fairview Microwave Inc | Cbl Assy, Sma Plug-Jack, 50 Ohm, 12"; |Fairview Microwave FMCA2818-12 RoHS : Not Compliant |
| 90 | ||
| 77313-818-12LF | Amphenol Communications Solutions | Conn, Header, 12Pos, 2Row, 2.54Mm, Th; |Amphenol Communications Solutions 77313-818-12LF RoHS : Compliant |
| 88 | ||
| B 8181-0 | TURCK Inc | Sensor Conn, M12, Rcpt, 8Pos, Cable; |Turck B 8181-0 RoHS : Compliant |
| 85 | ||
| 690368181872 | Wurth Elektronik | Conn, R/A Rcpt, 18Pos, 2Row, 2.54Mm; |Würth Elektronik 690368181872 RoHS : Compliant |
| 44 | ||
| CBD3818/160 | FORTEX | Micro Carbide Pcb Drill Bit, 1.6Mm; |Fortex CBD3818/160 RoHS : Not Compliant |
| 17 | ||
| 8-31818-1 | TE Connectivity | Terminal, Butt Splice; Insulator Colour:-; Product Range:Solistrand Series; Wire Size Awg Min:22Awg; Wire Size Awg Max:16Awg; Conductor Area Csa:1.65Mm²; Insulator Material:Uninsulated; Connector Type:Butt Splice Rohs Compliant: Yes RoHS : Compliant |
| 10 | ||
| 33281819225010 | HARTING Technology Group | M8 T1 Hybr. M-Fe Str. Pur Bk 1.0M Rohs Compliant: Yes |Harting 33281819225010 RoHS : Compliant |
| 10 | ||
| 881812 SL005 | Alpha Wire | Unshld Flex Cable, 12Cond, 18Awg, 30M; |Alpha Wire 881812 SL005 RoHS : Compliant |
| 3 | ||
![]() Analog Devices Inc | DS1818-10+ | Analog Devices Inc | 3.3V EconoReset with Pushbutto RoHS : Compliant |
| 90,549 | |
ADM1818-10ARTZ-RL7![]() | Analog Devices Inc | RESET GENERATOR I.C. RoHS : Compliant |
| 2,888 | ||
| DS1818-10+T&R | Analog Devices Inc | 3.3V EconoReset with Pushbutto RoHS : Compliant |
| 126 | ||
ADM1818-10AKSZ-RL7![]() | Analog Devices Inc | RESET GENERATOR I.C. RoHS : Compliant |
| 0 | ||
![]() RS | 8-31818-1 | TE Connectivity | SOLISTRAND TERMIANL BUTT SPLICE 22-16 COMM 22-18 MIL;AMPS-8-0031818-1;E74111-000 RoHS : Compliant |
| 1,518 | |
| WL-1818 (1818) | Wamco Inc | LAMP, INCANDESCENT, T-3 1/4 MINIATURE BAYONET, 24 V, 0.17 AMP, 3.3 MSCP, 250 HRS |
| 544 | ||
| SV 81-8 (19995) | Lumberg Connect GmbH | IP 40 PLUG CABLE MOUNT 8 POLE 6-8MM |
| 359 | ||
| B 8181-0 (U0885-26) | TURCK Inc | CIRCULAR M12 SOCKET, 8 POSITION, SCREW TERMINAL, 2A, 30VAC, IP67, B 8181 SERIES |
| 81 | ||
| 0818137 (UC-TMF 8) | Phoenix Contact | TERMINAL MARKER, UC-TMF 8 SERIES |
| 80 | ||
| CMBS 8181-0 (U0885-24) | TURCK Inc | CIRCULAR M12 PLUG, 8 POSITION, SCREW TERMINAL, 2A, 60V, CMBS 8181 SERIES |
| 25 | ||
| NI20U-G30-ADZ30X2-B3131 (M4281813) | TURCK Inc | INDUCTIVE SENSOR, 20 MM RANGE, M30 NON-FLUSH, NO, 20-250 VAC, NI20U SERIES |
| 10 | ||
| 011818108 (01181810) | Phoenix Mecano | BOX METAL, ALUMINUM UNPAINTED COVER INCLUDED 7.087 L X 7.087 W X 3.976 |
| 5 | ||
| 2398181 | RS Pro | BLUE ROUND PUSH BUTTON SWITCH, 1NO, MOMENTARY, 24VAC/VDC, 22.5MM CUTOUT |
| 2 | ||
| Q181815PCE | nVent Hoffman | ENCLOSURE, NEMA 4X, JBOX, SCREW COVER,175X175X149MM, POLYCARBONATE |
| 2 | ||
| CMBSX 8181-0 (U2-19270) | TURCK Inc | M12 CONNECTOR, 8 PIN, SCREW TERMINAL, SHIELDED, 75 V, 2 A |
| 2 | ||
| 2981813 (PSR-SPP- 24DC/ESD/4X1/30) | Phoenix Contact | SAFETY RELAYS, SAFETY, 1 CHANNEL, 250 VAC/VDC, PSR CLASSIC SERIES |
| 2 | ||
| 881812 SL005 | Alpha Wire | MULTICONDUCTOR CABLE, 12C, 18 AWG, 16X30, TC, PVC INS, CHROME PVC JKT, AWM |
| 1 | ||
| A1481818 (A1481818 CX100) | Amphenol Lutze | HIGH FLEXING CONTROL CABLE, 18 AWG/1.0MM 18C , GREY PVC, 600V UL AWM |
| 1 | ||
| 8181 | Olympic Wire & Cable Corp | WELDING CABLE, #6 STR BC, EPDM JKT, 8181, 75 AMP 105C 600V |
| 0 | ||
![]() Microchip Technology Inc | 1N5818-1 | Microchip Technology Inc | Small-Signal Schottky _ DO-41, Projected EOL: 2051-01-07 RoHS : Compliant |
| 374 | |
DSC1103AI2-171.8181![]() | Microchip Technology Inc | MEMS OSC, LVDS, 171.8181MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-05-21 RoHS : Compliant |
| 315 | ||
DSC1103AI2-171.8181T![]() | Microchip Technology Inc | MEMS OSC, LVDS, 171.8181MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-04-26 RoHS : Compliant |
| 315 | ||
| MQ1N8181 | Microchip Technology Inc | Low Capacitance TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MS1N8181 | Microchip Technology Inc | Low Capacitance TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MV1N8181 | Microchip Technology Inc | Low Capacitance TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 05818-127 | Microchip Technology Inc | OSC (1000C) [4 OUT,1V,0.5V,5MHZ, -130DB @1HZ], Projected EOL: 2046-04-30 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| 05818-123 | Microchip Technology Inc | OSC (1000C) [4 OUT,1V,0.5V,5MHZ, -123DB @1HZ], Projected EOL: 2046-04-30 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| MQ1N8181US | Microchip Technology Inc | Low Capacitance TVS _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MS1N8181US | Microchip Technology Inc | Low Capacitance TVS _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MV1N8181US | Microchip Technology Inc | Low Capacitance TVS _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MQ1N8181US/TR | Microchip Technology Inc | Low Capacitance TVS _ A-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
| MS1N8181US/TR | Microchip Technology Inc | Low Capacitance TVS _ A-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
| DSC6001JI2B-068.1818 | Microchip Technology Inc | MEMS OSC, LVCMOS, 68.1818MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VLGA, Projected EOL: 2046-05-13 RoHS : Compliant |
| 0 | ||
| DSC6001JI2B-068.1818T | Microchip Technology Inc | MEMS OSC, LVCMOS, 68.1818MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VLGA, Projected EOL: 2046-05-13 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 09-8181-1-05 | Staffall | 21,190 | |||
| 7252818-1 REV B | Lyn-Tron Inc | 1,920 | ||||
| BN818 15 | MISC. INDUSTRIAL HRD | 1,500 | ||||
| 1818-1032-AL-6 | RAF Electronic Hardware | 129 | ||||
| AN818-12W | Tri-Fitting Mfg Co | 125 | ||||
| 8181-SS-0440-7 | Amatom Electronic Hardware | 101 | ||||
| CA1818-1 | Alcoa Fastening Systems Aerospace | 80 | ||||
| 8181-1032-A-35 | RAF Electronic Hardware | 50 | ||||
| AN818-12D | AN FITTINGS/ELBOWS | 5 | ||||
| Q181810PCE | nVent Hoffman | 2 | ||||
| AN818-10W | AN FITTINGS/ELBOWS | 1 | ||||
| AN818-10J | AN FITTINGS/ELBOWS | 1 | ||||
| AN818-12W | AN FITTINGS/ELBOWS | 1 | ||||
| AN818-16D | AN FITTINGS/ELBOWS | 1 | ||||
| AN818-16 | AN FITTINGS/ELBOWS | 1 | ||||
![]() Onlinecomponents.com | 56161-8181 | Molex | Servo Motor Encoder Conn Loose Au Plating RoHS : Compliant |
| 63,946 | |
| CSB-8181 | BUD Industries Inc | Adapter Bracket RoHS : Compliant |
| 0 | ||
| 8181-E1G | BOYD Laconia | THERMAL ACCESSORY |
| 0 | ||
| RFA-8181 | Pan Pacific | ADAPTOR, SMA FEMALE TO UHF FEMALE Pan Pacific Part Number: RFA-8181 RoHS : Compliant |
| 0 | ||
| 45984-8181 | Molex | 1.27mm, 12.00mm Pitch, EXTreme LPHPower™ Receptacle Header, Right Angle, 8 Power Contacts, 40 Signal Contacts, Select Gold (Au) Plating, for 3.18mm Thick PC Board RoHS : Compliant |
| 0 | ||
| 45985-8181 | Molex | 1.27mm, 12.00mm Pitch, EXTreme LPHPower™ Header, Right Angle, 8 Power Contacts, 40 Signal Contacts, Select Gold (Au) Plating, for 3.18mm Thick PC Board RoHS : Compliant |
| 0 | ||
| 8181-1032-A | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 14-56-8181 | Molex | 2.54mm Pitch SL™ Insulation Displacement Connector Assembly, Female, Single Row, Version D, Back Ribs, Wire Size 22 AWG, 0.76µm Gold (Au), 18 Circuits RoHS : Compliant |
| 0 | ||
| 22-26-8181 | Molex | 2.54mm KK® IDT Double Cantilever Contact, 18 Circuits, Tin (Sn), Feed-Through, 26 Stranded or Solid, and 28 Solid, Stranded, or Fused, Brown ID Stripe RoHS : Compliant |
| 0 | ||
| GHG-414-8181-R0004 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| GHG-414-8181-R0002 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| GHG-414-8181-R0033 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| GHG-414-8181-R0035 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| GHG-414-8181-R0005 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| GHG-414-8181-R0007 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BC81816MTF | onsemi | Trans BJTs Single 25V 800mA SOT-23-3 T/R RoHS : Compliant |
| 9,000 | |
| TVS8181MUTBG | onsemi | TVS Diode Zener Uni-Directional 18V (Max) 30V 6-SON T/R RoHS : Compliant |
| 39,000 | ||
ADM1818-10AKS-RL7![]() | Analog Devices Inc | Supervisory Circuit 2.88V SOT-323 T/R RoHS : Not Compliant |
| 50,493 | ||
ADM1818-10AKSZ-RL7![]() | Analog Devices Inc | Supervisory Circuit 2.88V SOT-323 T/R RoHS : Compliant |
| 12,614 | ||
ADM1818-10ART-RL7![]() | Analog Devices Inc | Supervisory Circuit 2.88V SOT-23-3 T/R RoHS : Not Compliant |
| 4,805 | ||
ADM1818-10ARTZ-RL7![]() | Analog Devices Inc | Supervisory Circuit 2.88V SOT-23-3 T/R RoHS : Compliant |
| 16 | ||
BC81816MTF![]() | Fairchild Semiconductor Corporation | Trans BJTs Single 25V 800mA SOT-23-3 T/R RoHS : Compliant |
| 72,000 | ||
| DS1818-10+TR | Maxim Integrated Products | Supervisory Circuit 2.88V TO-226-3 T/R RoHS : Compliant |
| 35,675 | ||
| UPC8181TB-E3-A | Renesas Electronics Corporation | RF Amplifier 4GHz 7dBm SOT-363 RoHS : Compliant |
| 103,575 | ||
SIT8008AC-23-33E-14.318181G![]() | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 14.318181MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 250 | ||
| GW P9LR31.EM-PRPS-XX35-A818-150-R18-XX | ams OSRAM Group | GW P9LR31.EM - DURIS S 8, White LED RoHS : Compliant |
| 6,000 | ||
![]() Sager | 9755818181 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| 9855818181 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7706818106 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7706818151 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707308181 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707818176 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7708118181 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| A18181-160 | Qnity Laird | Thermal Interface Products COOLZORB-ULTRA,16018x18IN, |
| 0 | ||
| 9713818140 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9755818122 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9762818140 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9791818133 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813818118 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855818145 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855818190 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | 10127818-121LF | Amphenol Communications Solutions | Connector: wire-wire/PCB; contact; male; data; 4.2mm; tinned; FCI RoHS : Compliant |
| 26,434 | |
| 4-1703818-1 | TE Connectivity | Connector: automotive; plug; male; Automotive; 30A,40A; PIN: 4; IP67 RoHS : Compliant |
| 541 | ||
| 1-1971818-1 | TE Connectivity | Connector: wire-board; male; data; Inom: 2A; PIN: 11; 2.5mm; Imax: 2A RoHS : Compliant |
| 540 | ||
| 1300068181 | Molex | Connector: 7/8"; plug; PIN: 4; female; industrial; IP67; 10m |
| 20 | ||
| 1818181000 | Weidmüller Interface GmbH & Co. KG | 1818181000 RoHS : Compliant |
| 0 | ||
| 1818181500 | Weidmüller Interface GmbH & Co. KG | 1818181500 RoHS : Compliant |
| 0 | ||
| 1781816 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 1818135 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 1818140100 | Weidmüller Interface GmbH & Co. KG | 1818140100 RoHS : Compliant |
| 0 | ||
| 1818180 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 77313-818-18LF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 18; THT; 2.54mm RoHS : Compliant |
| 0 | ||
| 011818100 | Phoenix Mecano | Enclosure: multipurpose; X: 180mm; Y: 180mm; Z: 101mm; aluminium |
| 0 | ||
| 08-181 | NEO TOOLS | Socket: 6-angles; socket spanner; HEX 21mm; 3/8" |
| 0 | ||
| 1818142500 | Weidmüller Interface GmbH & Co. KG | 1818142500 RoHS : Compliant |
| 0 | ||
| 1818177 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | DS1818-10+ | Analog Devices Inc | 3.3V EconoReset with Pushbutton RoHS : Compliant | 91,709 | ||
| BM81810MUV-ME2 | ROHM Semiconductor | Automotive Panel Power Management IC RoHS : Compliant |
| 250 | ||
| BM81810MUF-ME2 | ROHM Semiconductor | Automotive Panel Power Management IC RoHS : Compliant |
| 250 | ||
![]() ComSIT USA | 55081813400 | Stelco GMBH Electronic Components | SMT CHIP INDUCTOR General Purpose Inductor, 0.18uH, 5%, 1 Element, Ceramic-Core, SMD, 0805 RoHS : Not Compliant | 5,040 | ||
| 49SSMD1431818125050E | CompoTEK | Electronic Component RoHS : Compliant | 5,000 | |||
| ADM181810AKSZRL7 | Analog Devices Inc | MICROPROCESSOR RESET CIRCUIT Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, PDSO3 RoHS : Compliant | 2,822 | |||
| ADM181810ARTZRL7 | Analog Devices Inc | MICROPROCESSOR RESET CIRCUIT Power Supply Support Circuit, Fixed, 1 Channel, +2.88VV, PDSO3 RoHS : Compliant | 100 | |||
![]() Interstate Connecting Components | 77315-818-13LF | Amphenol FCi | BERGSTIK HDR SR RA-77315-818-1 RoHS : Compliant | 0 | ||
| 781-8110-17 A836 | TE Connectivity | 781-8110-17 A836 | 0 | |||
| 77313-818-12LF | Amphenol FCi | BERGSTIK RoHS : Unknown |
| 0 | ||
| KCIR06R2011PF8098181 | ITT Interconnect Solutions | K-CIR06R20-11P-F80-98-181 | 0 | |||
| 10127818-111PLF | Amphenol FCi | 10127818-111PLF-MINITEK PWR4.2 RoHS : Compliant | 0 | |||
| 10131318-181210RLF | Amphenol FCi | 10131318-181210RLF-MTK 4.2 18P | 0 | |||
| 8-31818-1 | TE Connectivity | SOLIS BUTT 22-16 COMM 22-18MIL RoHS : Compliant |
| 0 | ||
| 853818-1 | TE Connectivity | PLATE,EJECTOR RoHS : Compliant |
| 0 | ||
| 112288-1812 | ITT Interconnect Solutions | MKJ4NW-CS-MM-168 | 0 | |||
| 77311-818-14LF | Amphenol FCi | BERGSTIK HDR SR STR-77311-818- RoHS : Unknown | 0 | |||
| 70Q3-28-18-1-ZB | TE Connectivity | 70Q3-28-18-1-ZB | 0 | |||
| 70LCS1-28-18-1-ZB-DB | TE Connectivity | 70LCS1-28-18-1-ZB-DB RoHS : Compliant | 0 | |||
| 381813-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTX40AC90-2014 | 0 | |||
| 5910818-1 REV F | Amphenol Aerospace | 0 | ||||
| 1766818-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | UPC8181TB-E3 | NEC Electronics Group | RoHS : Not Compliant | 2,845 | ||
| 2238-867-18181 | YAGEO Corporation | 513 | ||||
![]() PEI Genesis | GTS08-18-12P-116 | Amphenol Corporation |
| 114 | ||
| GTC08-18-10S-B30-LC | Amphenol Corporation |
| 114 | |||
| S1038-1812-1.75-34 | SOURIAU-SUNBANK |
| 0 | |||
| S5308-18-12 | SOURIAU-SUNBANK |
| 0 | |||
| B0803008-18-12L | SOURIAU-SUNBANK |
| 0 | |||
| GTC08-18-10S-025-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-18-10SX-025-RDS | Amphenol Corporation |
| 0 | |||
| GTC08-18-11P-025-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-18-12S-025-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-18-19SY-025-B30 | Amphenol Corporation |
| 0 | |||
| GTS08-18-10SY-116 | Amphenol Corporation |
| 0 | |||
| GTS08-18-11SY-025 | Amphenol Corporation |
| 0 | |||
| GTC08-18-12PW-025-LC | Amphenol Corporation |
| 0 | |||
| GTC08-18-12SZ-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-18-19PX-025-LC | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 63818-1 | TE Connectivity | Terminals RoHS : Compliant |
| 171,600 | |
| 10127818-121LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 39,600 | ||
| 77313-818-12LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 3,032 | ||
| 1-2213818-1 | TE Connectivity | Switches RoHS : Compliant |
| 3,030 | ||
| 77311-818-12LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 2,592 | ||
| 5-1814818-1 | TE Connectivity | Connectors RoHS : Compliant |
| 1,750 | ||
| 2322818-1 | TE Connectivity | Connectors RoHS : Compliant |
| 825 | ||
| 8-31818-1 | TE Connectivity | Terminals RoHS : Compliant |
| 804 | ||
| 77313-818-18LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 792 | ||
| 1310818-1 | TE Connectivity | Connectors RoHS : Compliant |
| 789 | ||
| 4-1703818-1 | TE Connectivity | Connectors RoHS : Compliant |
| 357 | ||
| 77313-818-10LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 330 | ||
| 75-068818-10S | Amphenol Corporation | ER 4C 4#12 SKT PLUG |
| 110 | ||
| 281810-2 | TE Connectivity | Terminals RoHS : Compliant |
| 10 | ||
| 381813-000 | TE Connectivity | connector accessories |
| 3 | ||
![]() Richardson RFPD | ADM1818-10ARTZ-RL7![]() | Analog Devices Inc | Processor Supervisor 2.88V 1 Active Low/Open Drain RoHS : Compliant |
| 45 | |
| R413818121 | Radiall | Attenuator 26.5GHz RoHS : Compliant |
| 0 | ||
| 8181-E1G | BOYD Laconia | THERMAL MGMT ACCSY RoHS : Compliant | 0 | |||
| SI5335D-B08181-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| R411818124 | Radiall | Attenuator 6GHz RoHS : Compliant |
| 0 | ||
| R-781.8-1.0 | RECOM Power GmbH | Module DC-DC 1-OUT 1.8V 1A 1.8W 3-Pin SIP Tube RoHS : Compliant |
| 0 | ||
| R411818121 | Radiall | Attenuator 18GHz RoHS : Compliant |
| 0 | ||
| R411818122 | Radiall | Fixed Coax Attenuatr RoHS : Compliant | 0 | |||
| RL1218-181-R | Eaton Corporation | Unshielded Radial Leaded Drum Core Inductor RoHS : Compliant | 0 | |||
| RH100-14.31818-18-3030-EXT-TR | Raltron Electronics Corporation | Crystal, 14.31818 MHz, 18 pF, ±30ppm (Tol) ±30ppm RoHS : Compliant | 0 | |||
| SI5335D-B08181-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| MFBW1V1608-181-R | Eaton Corporation | Ferrite Beads Multi-Layer 180Ohm 25% 100MHz 1A 0.2 RoHS : Compliant |
| 0 | ||
| 016681-81 | Wakefield-Vette | EXTRUDED HEAT SINK RoHS : Compliant | 0 | |||
| 16681-81 | Wakefield-Vette | Extruded Heat Sink RoHS : Compliant | 0 | |||
| R413818115 | Radiall | Attenuator 4GHz RoHS : Not Compliant |
| 0 | ||
![]() Chip 1 Exchange | 1-1703818-1 | TE Connectivity | INSTOCK RoHS : Compliant | 18,210 | ||
| 55081813400 | SUM | INSTOCK | 2,913 | |||
| C8181-A124-B114 | INSTOCK | 250 | ||||
| 281-81622-0001 | INSTOCK | 250 | ||||
| C8181-A124-B105 | INSTOCK | 15 | ||||
| C8181-A124-B100 | INSTOCK | 9 | ||||
![]() Avnet Abacus | BBPY00160808181Y00 | Pulse Electronics Corporation | Ferrite Bead 0603 1608 Metric 180 ohm 2 A BBPY Series 009 ohm 25 - Tape and Reel (Alt: BBPY00160808181Y00) RoHS : Compliant | 196,000 | ||
| 1-1703818-1 | TE Connectivity | Automotive Connector Housing Heavy Duty Sealed Connector Series Plug 4 Ways (Alt: 1-1703818-1) RoHS : Compliant | 1,900 | |||
| MAL211818102E3 | Vishay Intertechnologies | Electrolytic Capacitor 1000 uF 63 V 20 Axial Leaded 8000 hours 125C Polar Axial Leaded (Alt: MAL211818102E3) RoHS : Compliant | 200 | |||
| 1818122 | Phoenix Contact | MCV 1515GF35LR MCV1515GF35LR (Alt: 1818122) RoHS : Compliant | 0 | |||
| 810818-1 | TE Connectivity | LUB WICK (Alt: 810818-1) RoHS : Not Compliant | 0 | |||
| 923181815 | Molex | (Alt: 923181815) RoHS : Compliant | 0 | |||
| 8-31818-1 | TE Connectivity | (Alt: 8-31818-1) RoHS : Compliant | 0 | |||
| 4-1393818-1 | TE Connectivity | Electromechanical Relay DPDT 2A 24VDC 890Ohm PlugIn (Alt: 4-1393818-1) RoHS : Compliant | 0 | |||
| 4-1393818-1 | TE Connectivity | Electromechanical Relay DPDT 2A 24VDC 890Ohm PlugIn (Alt: 4-1393818-1) RoHS : Compliant | 0 | |||
| 5-1814818-1 | TE Connectivity | Conn MiniUHF PL 0Hz to 2GHz 50Ohm Crimp ST Cable Mount (Alt: 5-1814818-1) RoHS : Compliant | 0 | |||
| 77313-818-12LF | Amphenol Corporation | Conn Unshrouded Header HDR 12 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-818-12LF) RoHS : Compliant | 0 | |||
| MAL213658181E3 | Vishay Intertechnologies | 180uF 63V 10x30 105C 7000h (Alt: MAL213658181E3) RoHS : Compliant | 0 | |||
| 77311-818-14LF | Amphenol Corporation | Conn Unshrouded Header HDR 14 POS 254mm Solder ST ThruHole Bag (Alt: 77311-818-14LF) RoHS : Compliant | 0 | |||
| MAL211818101E3 | Vishay Intertechnologies | Electrolytic Capacitor 100 uF 63 V 20 Axial Leaded 8000 hours 125C Polar Axial Leaded (Alt: MAL211818101E3) RoHS : Compliant | 0 | |||
| 10127818-111PLF | Amphenol Corporation | Contact PL Crimp ST Cable Mount Paper TR (Alt: 10127818-111PLF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | WSHM28181L000FEA | Vishay Intertechnologies | (Alt: WSHM28181L000FEA) RoHS : Compliant | 0 | ||
| 77313-818-14LF | Amphenol Corporation | (Alt: 77313-818-14LF) RoHS : Compliant | 0 | |||
| WSHP28181L000FEB | Vishay Intertechnologies | (Alt: WSHP28181L000FEB) RoHS : Compliant | 0 | |||
| MFBM1V1608-181-R | Eaton Corporation | (Alt: MFBM1V1608-181-R) RoHS : Compliant | 0 | |||
| WSHP28181L000FEA | Vishay Intertechnologies | (Alt: WSHP28181L000FEA) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BM81810MUV-M | ROHM Semiconductor | (Alt: BM81810MUV-M) RoHS : Compliant | 0 | ||
| BM81810MUF-M | ROHM Semiconductor | Automotive Panel Power Management IC for TFTLCD Panels (Alt: BM81810MUF-M) RoHS : Compliant | 0 | |||
| TEA88181T/1Y | NXP Semiconductors | RESONANT LLC POWER SUPPLY (Alt: TEA88181T/1Y) RoHS : Compliant | 0 | |||
| BM81810MUV-ME2 | ROHM Semiconductor | (Alt: BM81810MUV-ME2) RoHS : Compliant | 0 | |||
| SIT9396AA-02A8-1810-125.000000 | SiTime Corporation | UltraLow Jitter Differential XO for Automotive (Alt: SIT9396AA-02A8-1810-125.000000) RoHS : Compliant | 0 | |||
| SIT9375AI-04A8-1810-156.250000G | SiTime Corporation | SiT9375I UltraLow Jitter Differential XO for Standard Frequencies 18V 5 156250000 MHz (Alt: SIT9375AI-04A8-1810-156.250000G) RoHS : Compliant | 0 | |||
| SIT9375AI-04A8-1810-156.250000D | SiTime Corporation | SiT9375I UltraLow Jitter Differential XO for Standard Frequencies 18V 5 156250000 MHz (Alt: SIT9375AI-04A8-1810-156.250000D) RoHS : Compliant | 0 | |||
| SIT9375AI-04A8-1810-156.250000E | SiTime Corporation | SiT9375I UltraLow Jitter Differential XO for Standard Frequencies 18V 5 156250000 MHz (Alt: SIT9375AI-04A8-1810-156.250000E) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AIUR-08-181K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | |
![]() Component Electronics, Inc | 2306-181-81301 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 12,898 | |
| 2222-678-58181 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 7,890 | ||
| 2306-181-81501 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 5,000 | ||
| 2306-181-81009 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,500 | ||
| 2306-181-81914 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,500 | ||
| 2306-181-81303 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,445 | ||
| 2306-181-81584 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,300 | ||
| 2306-181-81003 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,995 | ||
| 2306-181-81823 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,970 | ||
| 2306-181-81542 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 500 | ||
| RMC1/8-181JTP | Kamaya Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 400 | ||
| 2306-181-81213 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 250 | ||
| 2222-118-18101 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 138 | ||
| 2222-138-18151 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 75 | ||
| PWC-3818A-72138181 | NEC Electronics Group | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | 1818-1032-AL-6 | RAF Electronic Hardware |
| 22 | ||
| 38-108-18-16 | Southco | Create high-strength permanent bonding of diverse materials such as metal wood and masonry in through-hole and blind-hole applications with affordable Southco Drive Rivets. Easy installation and removal make Drive Rivets an easy choice for field wo | 0 | |||
| 8181-1032-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8181-1032-A-35 | RAF Electronic Hardware | 0 | ||||
| 38-208-18-16 | Southco | Create high-strength permanent bonding of diverse materials such as metal wood and masonry in through-hole and blind-hole applications with affordable Southco Drive Rivets. Easy installation and removal make Drive Rivets an easy choice for field wo | 0 | |||
| 8181-1032-SS-20 | RAF Electronic Hardware | 0 | ||||
| R4-81-811-30 | Southco | R4-81-811-30 | 0 | |||
| 1818-1032-A | RAF Electronic Hardware | 0 | ||||
| 1818-1032-AL-24 | RAF Electronic Hardware | 0 | ||||
| 383-81814-00 | Acumnet / Camcar | 0 | ||||
| 8181-1032-A-24 | RAF Electronic Hardware | 0 | ||||
| 8181-832-SS-20 | RAF Electronic Hardware | 0 | ||||
| 8181-1032-A-22 | RAF Electronic Hardware | 0 | ||||
| 8181-832-A-34 | RAF Electronic Hardware | 0 | ||||
| 1818-1224-S-12 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | BXRC-2818152-A | Bridgelux Inc | Wire Harness for Vero 10131829 LED Arrays 1525mm Length 28AWG Fused to 18AWG Pigtails Box (Alt: BXRC-2818152-A) RoHS : Compliant | 0 | ||
| FJ8067703281816S R3LC | Intel Corporation | (Alt: 959163) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M22759/18-18-1 | Harbour Industries | Wire and Cable |
| 201 | |
| 33-1818-1 | Amphenol RF | Connector Misc | 70 | |||
| RSC 18 18 18D | FDH Electronics | Wire Placehldr | 60 | |||
| 3700-018-1814 | Amphenol Aerospace | Connector 26482 | 19 | |||
| 12981819 | Connector Technology Inc | Other Products |
| 7 | ||
| 8181-05 | SOURIAU-SUNBANK | Placeholder | 1 | |||
| 818131-1 REV A | AbelConn LLC | Circular Conn | 1 | |||
| 1355-008-1815 | Aero-Electric Connector Inc | Cable Assembly | 0 | |||
| 3815-018-1811 | Aero-Electric Connector Inc | Insert | 0 | |||
| 3835-018-1811 | Aero-Electric Connector Inc | Cable Assembly | 0 | |||
| 1355-008-1812 | Aero-Electric Connector Inc | Shell | 0 | |||
| 1355-008-1811 | Aero-Electric Connector Inc | Shell | 0 | |||
![]() Flip Electronics | NSPM8181MUTBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,810 | |
![]() Maritex | CF08181H1T0-LF | Cvilux Corporation | Non-ZIF connector for FFC/FPC; pitch 1.00mm; 18-contacts; SMD; side entry |
| 2,406 | |
| RNP18-PK0608-181K | RDA Microelectronics | Inductor: wire; THT; 180uH; Ipracy: 750mA; 758.75mOhm; 10% |
| 1,000 | ||
![]() Neutron USA | 7000-78181-0000000 | Murrelektronik GmbH | Connector, 7/8 Inch, Female, 0 Degree, Screw Terminal, Plastic Housing, 4-Pole RoHS : Compliant |
| 44 | |
| FEC-81-81 | Mersen Electrical Power | Fuse Holder CC FH INLINE 1P 81-81 RoHS : Compliant |
| 36 | ||
| 33281819225010 | HARTING Technology Group | Sensor Cables / Actuator Cables M8 T1 Hybr. m/fe str. PUR bk 1.0m RoHS : Compliant |
| 20 | ||
| 33281819225030 | HARTING Technology Group | Sensor Cables / Actuator Cables M8 T1 Hybr. m/fe str. PUR bk 3.0m RoHS : Compliant |
| 20 | ||
| FEB-81-81-BA | Mersen Electrical Power | Fuse Holder MIDGET 1-POLE BREAKAWAY FUSEH RoHS : Compliant |
| 8 | ||
| B 8181-0 | TURCK Inc | Connector M12 Eurofast Female Straight 8 Wire 6-8mm Cable Black PG 9 Gland, Alternate: U0885-26 |
| 0 | ||
| BV 8181-0 | TURCK Inc | Connector, Str M12 F 8pos, PG9 Mt, Grip: 6-8mm, 18AWG, U2-10259 |
| 0 | ||
| B 8181-0/4-6MM | TURCK Inc | Connector, Str M12 F 8pos, PG 7, 4-6mm Grip, 18AWG, U2-19259 |
| 0 | ||
| 0818140 | Phoenix Contact | Marker for terminal blocks, UC-TMF 6, 5.6 x 5.1 mm, 80 per sheet, white RoHS : Compliant |
| 0 | ||
| 0818111 | Phoenix Contact | Marker for terminal blocks, Sheet, white, 3.6x10.5 mm field, 120label/sheet, UC-TM 4, Price per sheet RoHS : Compliant |
| 0 | ||
| 0818137 | Phoenix Contact | Marker for terminal blocks, Sheet, white, 7.6 x 5.1 mm field, 56, UC-TMF 8 RoHS : Compliant |
| 0 | ||
| 2908181 | Phoenix Contact | Relay;miniature relay;plug-in; 2 changeover contacts, REL-MR-BL-24DC/21-21/MS RoHS : Compliant |
| 0 | ||
| 0818166 | Phoenix Contact | Marker for terminal blocks, Sheet, white, 3.6x5.1mm field, 120label/sheet, UC-TMF 4, Price per sheet RoHS : Compliant |
| 0 | ||
| 1098181 | Phoenix Contact | PCB terminal block, 1row 8pos 8conn, Lever Push-in, pitch: 7.5mm, Green, LPTA 6/ 8-7,5-ZB RoHS : Compliant |
| 0 | ||
| CMBSX 8181-0 | TURCK Inc | Connector, Str M12 Male 8 pos, 22AWG, 5-9.7mm Grip, 0.5A 48V, U2-19270 |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03818-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Rounded Body SMP Female Right Angle to SMP Female Right Angle Cable 12 Inch Length Using PE-SR047FL Coax., Radio frequency assembly rounded body SMP female right angle to SMP female right angle cable 12 inch length using PE-SR047FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Rounded body SMP female right angle to SMP female right angle cable 12 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W03818-12 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W03818-12 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this rounded body SMP female right angle to SMP female right angle cable 12 inch length using PE-SR047FL coax. |
| 121 | |
| PE3C9818-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Female Low Loss Cable 12 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly TNC male to TNC female low loss cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female low loss cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assembly has male gender on end 1 and female on end 2. PE3C9818-12 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3C9818-12 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9818-12 can also be used in the other direction and will be TNC female to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female low loss cable 12 inch length using TCOM-240 coax with Times Microwave components. |
| 21 | ||
| PE3W01818-12 | Pasternack Enterprises |
| 0 | |||
| PE3W01818-100CM | Pasternack Enterprises |
| 0 | |||
| PE38181 | Pasternack Enterprises | 0 | ||||
| PE3C8181-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SSMC Plug Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-48 can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-48 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C8181-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SSMC Plug Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-200CM can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-200CM can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C8181-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SSMC Plug Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-24 can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-24 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C8181-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SSMC Plug Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-100CM can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-100CM can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W10818-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to MMCX Plug Right Angle Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W10818-12 can also be known as a SMA jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MMCX male cable assembly PE3W10818-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female bulkhead to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10818-12 can also be used in the other direction and will be right angle MMCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax. |
| 0 | ||
| PE3C8181 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SSMC Plug Low Loss Cable Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181 can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W18181LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Female Bulkhead to BNC Female Bulkhead Cable Using RG196 Coax, LF Solder. PE3W18181LF is a reverse thread SMA female bulkhead to BNC female bulkhead cable using RG196 coax. This Pasternack reverse thread SMA female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our reverse thread female SMA bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18181LF SMA reverse thread female bulkhead to BNC female bulkhead cable assembly is constructed with RG196 coax. | 0 | |||
| PE3W01818-150CM | Pasternack Enterprises |
| 0 | |||
| PE3818-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to SMA male cable 18 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 18 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3818-18, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3818-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 18 inch length using RG405 coax. |
| 0 | ||
| PE3W08181 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. N Female to TNC Male Cable Using RG225 Coax. PE3W08181 is a N female to TNC male cable using RG225 coax. This Pasternack N female to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08181 N female to TNC male cable assembly is constructed with RG225 coax. | 0 | |||
![]() TE Connectivity | 2-31818-1 | TE Connectivity | SOLIS BUTT 22-16COMM22-18MIL Splice Type: Butt Splice Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Insulation Option: Uninsulated Butt Splice 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Electrical Wire Splice | Part Number: 2-31818-1 | Internal Number: 2-31818-1 | TE Connectivity RoHS : Compliant |
| 9,226 | |
| 2322818-1 | TE Connectivity | PL-035018-1.25-9 Primary Product Color: White Label Type: Electrical Cabinet Identification Label Style: Die-Cut Label Adhesive Type: Compressible Polyolefine Foam Adhesive Product Width: 35 mm White Electrical Cabinet Identification Die-Cut Compressible Polyolefine Foam Adhesive | Thermal Transfer Printable Panel Label | Part Number: 2322818-1 | Internal Number: 2322818-1 | 35 mm RoHS : Compliant |
| 2,321 | ||
| 8-31818-1 | TE Connectivity | SOLIS BUTT 22-16 COMM 22-18MIL Splice Type: Butt Splice Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Insulation Option: Uninsulated Butt Splice 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Electrical Wire Splice | Part Number: 8-31818-1 | Internal Number: 8-31818-1 | Alias Number: AMPS-8-0031818-1 | TE Connectivity RoHS : Compliant |
| 938 | ||
| 281812-1 | TE Connectivity | COVER FOR 25W. SPLASH PROOF CO Number of Positions: 25 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover Primary Product Material: Polyamide 6.6 GF Cable Exit Angle: 90 ° Automotive Connector Cap & Cover | 25 Black Cover Polyamide 6.6 GF | Part Number: 281812-1 | Internal Number: 281812-1 | TE Connectivity RoHS : Compliant |
| 468 | ||
| 2468181-2 | TE Connectivity | LUMAWISE Endurance N+ 76mm, 5P, w/Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Vented Number of Positions: 5 Sealable: Yes Street Lighting Base Assembly | 76 mm 3" Vented 5 | Part Number: 2468181-2 | Internal Number: 2468181-2 | TE Connectivity RoHS : Compliant |
| 100 | ||
| 2468181-3 | TE Connectivity | LUMAWISE Endurance N+ 76mm, 3P, w/Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Vented Number of Positions: 3 Sealable: Yes Street Lighting Base Assembly | 76 mm 3" Vented | Part Number: 2468181-3 | Internal Number: 2468181-3 | TE Connectivity RoHS : Compliant |
| 100 | ||
| 2468181-6 | TE Connectivity | LUMAWISE Endurance N+ 76mm, 3P, w/o Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Not Vented Number of Positions: 3 Sealable: Yes Street Lighting Base Assembly | 76 mm 3" Not Vented | Part Number: 2468181-6 | Internal Number: 2468181-6 | TE Connectivity RoHS : Compliant |
| 100 | ||
| 2468181-5 | TE Connectivity | LUMAWISE Endurance N+ 76mm, 5P, w/o Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Not Vented Number of Positions: 5 Sealable: Yes Street Lighting Base Assembly | 76 mm 3" Not Vented 5 | Part Number: 2468181-5 | Internal Number: 2468181-5 | TE Connectivity RoHS : Compliant |
| 99 | ||
| 1969818-1 | TE Connectivity | 09P UMNL PIN HDR ASSY NATL, PIN V0 GW PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 9 Number of Rows: 3 PCB Mount Header Vertical Wire-to-Board 9 | PCB Header & Receptacle | Part Number: 1969818-1 | Internal Number: 1969818-1 | TE Connectivity RoHS : Compliant |
| 98 | ||
| 2468181-4 | TE Connectivity | LUMAWISE Endurance N+ 76mm, 7P, w/o Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Not Vented Number of Positions: 7 Sealable: Yes Street Lighting Base Assembly | 76 mm 3" Not Vented | Part Number: 2468181-4 | Internal Number: 2468181-4 | TE Connectivity RoHS : Compliant |
| 88 | ||
| 2468181-1 | TE Connectivity | LUMAWISE Endurance N+ 76mm, 7P, w/Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Vented Number of Positions: 7 Sealable: Yes Street Lighting Base Assembly | 76 mm 3" Vented | Part Number: 2468181-1 | Internal Number: 2468181-1 | TE Connectivity RoHS : Compliant |
| 87 | ||
![]() Vyrian | SRR4028-181Y | Bourns Inc | General Purpose Inductor, 180uH, 30%, 1 Element, Ferrite-Core, SMD, 1919 RoHS : Compliant | 13,685 | ||
| DS1818-10+ | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, CMOS RoHS : Compliant | 12,280 | |||
| 2818148 | Phoenix Contact | RF Connector Adapter, N-N, Male-Female RoHS : Compliant | 12,208 | |||
| DS1818-10-T-R | Analog Devices (Maxim Integrated) | 12,077 | ||||
5962-01-181-8197![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 1000uV Offset-Max, MBCY8 RoHS : Not Compliant | 11,181 | |||
| DS1818-10+T&R | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, CMOS RoHS : Compliant | 9,862 | |||
| MAL211818101E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 100uF, Through Hole Mount RoHS : Compliant | 8,016 | |||
ADM1818-10ART-REEL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, PDSO3 RoHS : Not Compliant | 7,910 | |||
ADM1818-10AKS-REEL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, PDSO3 RoHS : Not Compliant | 6,991 | |||
ADM1818-10AKSZ-RL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, PDSO3 RoHS : Compliant | 6,791 | |||
ADM1818-10AKS-RL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88VV, PDSO3 RoHS : Not Compliant | 5,633 | |||
ADM1818-10AKSZ-RL![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, PDSO3 RoHS : Compliant | 5,550 | |||
| 1818180 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,103 | |||
| R-781.8-1.0 | RECOM Power GmbH | Switching Regulator, 1A, 430kHz Switching Freq-Max, Hybrid, PSIP3 RoHS : Compliant | 640 | |||
PRLL5818,115![]() | NXP Semiconductors | Rectifier Diode, Schottky, 1 Phase, 1 Element, 1A, 30V V(RRM), Silicon RoHS : Compliant | 426 | |||
![]() Waytek, Inc. | HL8-18-10 | NSPA | 10-18GA Closed End Connector Clear / Yellow Dashes, sealed up to four wires |
| 4,030 | |
![]() Win Source Electronics | RK818-1 | Rockchip Electronics Co Ltd |
| 29,125 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |