| Electronic Components Datasheet Search |
|
7985 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | L7985ATR | STMicroelectronics | DC/DC Switching Regulator, Adjustable, Buck, Buck-Boost, Single Output, 600 mV to 38 V, 2 A - Tape and Reel (Alt: L7985ATR) RoHS : Compliant | 2,500 | ||
| A7985ATR | STMicroelectronics | Conv DC-DC Single Step Down 4.5V to 38V 8-Pin HSOP EP T/R - Tape and Reel (Alt: A7985ATR) RoHS : Compliant | 0 | |||
| Y-84279859-0000000 | TE Connectivity | - Bulk (Alt: Y-84279859-0000000) RoHS : Not Compliant |
| 0 | ||
| 1-87985-0 | TE Connectivity | - Rail/Tube (Alt: 1-87985-0) RoHS : Compliant | 0 | |||
| 1-5177985-1 | TE Connectivity | - Tape and Reel (Alt: 1-5177985-1) RoHS : Not Compliant |
| 0 | ||
| 9-2208798-5 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 9-2208798-5) RoHS : Not Compliant |
| 0 | ||
| 87985-8 | TE Connectivity | - Rail/Tube (Alt: 87985-8) RoHS : Compliant | 0 | |||
| ORCHSLESL31Y 957985 | Intel Corporation | (Alt: ORCHSLESL31Y 957985) RoHS : Not Compliant | 0 | |||
| 5177985-1 | TE Connectivity | Mezzanine Connector, Receptacle, 0.8 mm, 2 Rows, 40 Contacts, Surface Mount, Beryllium Copper - Tape and Reel (Alt: 5177985-1) RoHS : Compliant |
| 0 | ||
| 11107985-00 | TE Connectivity | 1 PSI, 1/2MNPT, 1-5V, CABLE, 4FT., 316L - Bag (Alt: 11107985-00) RoHS : Not Compliant |
| 0 | ||
| 7940107985 | Weidmüller Interface GmbH & Co. KG | QL38OP01- OP CURVE-AC - Bulk (Alt: 7940107985) RoHS : Not Compliant |
| 0 | ||
| L7985A | STMicroelectronics | DC/DC Switching Regulator, Adjustable, Buck, Buck-Boost, Single Output, 600 mV to 38 V, 2 A - Rail/Tube (Alt: L7985A) RoHS : Compliant | 0 | |||
| 1707985-9 | TE Connectivity | - Bag (Alt: 1707985-9) RoHS : Not Compliant | 0 | |||
| 1798500000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1798500000) RoHS : Compliant |
| 0 | ||
| 8-2151798-5 | TE Connectivity | - Bulk (Alt: 8-2151798-5) RoHS : Not Compliant | 0 | |||
![]() Mouser Electronics | PQ50SA-1618PS(1007)(66) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | |
| PQ50SA-1820PS(1007)(66) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2022PS(1007)(66) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2428PS(1007)(66) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-1618PS(1007)(63) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-1618PS(1007)(64) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-1820PS(1007)(63) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-1820PS(1007)(64) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2022PS(1007)(63) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2022PS(1007)(64) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2022PS(1007)(61) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2428PS(1007)(63) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2428PS(1007)(64) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-1820PS(1007)(61) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
| PQ50SA-2428PS(1007)(61) | Hirose Electric Co Ltd | Heavy Duty Power Connectors |
| 0 | ||
![]() Newark | L7985A | STMicroelectronics | Voltage Reg, Buck, 2A, 1Mhz, Hsop-8; |Stmicroelectronics L7985A RoHS : Compliant |
| 4,617 | |
| 7985LC 010500 | Belden Inc | #18 Ffep Brd Fep; |Belden 7985LC 010500 RoHS : Not Compliant |
| 4,000 | ||
| 5177985-1 | TE Connectivity | Mezzanine Conn, Rcpt, 40Pos, 2Row, 0.8Mm; |Te Connectivity Amp 5177985-1 RoHS : Compliant |
| 1,029 | ||
| 5177985-1 | TE Connectivity | Mezzanine Conn, Rcpt, 40Pos, 2Row, 0.8Mm; |Te Connectivity Amp 5177985-1 RoHS : Compliant |
| 1,029 | ||
| 5177985-4 | TE Connectivity | Connector, Stacking, Rcpt, 100Pos, 2Row; Mezzanine Connector Type:Receptacle; Pitch Spacing:0.8Mm; No. Of Rows:2Rows; No. Of Contacts:100Contacts; Connector Mounting:Surface Mount; Contact Material:Beryllium Copper; Gender:Receptaclerohs Compliant: Yes RoHS : Compliant |
| 1,017 | ||
| A7985ATR | STMicroelectronics | Dc/Dc Conv, Buck, 1Mhz, 150Deg C; |Stmicroelectronics A7985ATR RoHS : Compliant |
| 921 | ||
| A7985ATR | STMicroelectronics | Dc/Dc Conv, Buck, 1Mhz, 150Deg C; |Stmicroelectronics A7985ATR RoHS : Compliant |
| 921 | ||
| 5177985-3 | TE Connectivity | Stacking Connector, Rcpt, 80Pos, 0.8Mm; |Te Connectivity Amp 5177985-3 RoHS : Compliant |
| 458 | ||
| 5177985-4 | TE Connectivity | Mezzanine Conn, Rcpt, 100Pos, 0.8Mm; |Te Connectivity Amp 5177985-4 RoHS : Compliant |
| 429 | ||
| 5177985-4 | TE Connectivity | Mezzanine Conn, Rcpt, 100Pos, 0.8Mm; |Te Connectivity Amp 5177985-4 RoHS : Compliant |
| 429 | ||
| 27-9858 | Stellar labs (MCM Electronics) | 2 X Rca Male Connectors Red And Black; No. Of Contacts:-; Gender:Plug; Contact Plating:-; Connector Body Material:-; Connector Colour:Black, Red; External Diameter:-; Product Range:- Rohs Compliant: Yes |Stellar Labs 27-9858 RoHS : Compliant |
| 97 | ||
AD7985BCPZ![]() | Analog Devices Inc | Adc, 16Bit, 2.5Msps, Pseudo Differential; |Analog Devices, Inc. AD7985BCPZ RoHS : Compliant |
| 11 | ||
| FMCA1798-50CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1798-50CM RoHS : Not Compliant |
| 2 | ||
| FMCA2798-50CM | Fairview Microwave Inc | Ra Qma Male-Ra Qma Male Cbl; |Fairview Microwave FMCA2798-50CM RoHS : Not Compliant |
| 2 | ||
| 4503 7985 00 | TE Connectivity | Rf/Coaxial, Osp Plug, Straight, 50 Ohm, Solder; Connector Type:Osp Coaxial; Connector Body Style:Straight Plug; Coaxial Termination:Solder; Impedance:50Ohm; Coaxial Cable Type:Rg405; Contact Material:Beryllium Copper; Product Range:-Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | MAX77985BEFD+ | Analog Devices Inc | 19VIN, 3.5/5.5AOUT 1-Cell Li-i RoHS : Compliant |
| 1,633 | |
AD7985BCPZ-RL7![]() | Analog Devices Inc | 16-bit, 2.5MSPS, SE ADCR ADC I RoHS : Compliant |
| 1,500 | ||
| MAX77985AEFD+ | Analog Devices Inc | 19VIN, 3.5/5.5AOUT 1-Cell Li-i RoHS : Compliant |
| 159 | ||
AD7985BCPZ![]() | Analog Devices Inc | 16-bit, 2.5MSPS, SE ADCR ADC I RoHS : Compliant |
| 83 | ||
| EVAL-AD7985FMCZ | Analog Devices Inc | EVALUATION BOARD RoHS : Compliant |
| 15 | ||
| MAX77985BEVKIT# | Analog Devices Inc | Evaluation kit for MAX77985 19 |
| 12 | ||
| MAX77985AEVKIT# | Analog Devices Inc | Evaluation kit for MAX77985 19 |
| 7 | ||
| MAX77985BEFD+T | Analog Devices Inc | 19VIN, 3.5/5.5AOUT 1-Cell Li-i RoHS : Compliant |
| 0 | ||
| MAX77985AEFD+T | Analog Devices Inc | 19VIN, 3.5/5.5AOUT 1-Cell Li-i RoHS : Compliant |
| 0 | ||
![]() RS | 2097985 | RS Pro | ELECTRICAL CABLE 3 WIRE 1.5MM2 BLACK PVC JACKET 100M, 24A 1 KV, 600V, N2XY |
| 200 | |
| 1779851 (MSTBT 2 5/ 4-ST) | Phoenix Contact | PCB PLUG SCREW 5MM 12AWG 320V 12A 4 POSITION COMBICON CONTROL SERIES |
| 154 | ||
| K50LGRYA120 (77985) | Banner Engineering Corp | INDICATOR LIGHT, AC, 50MM, 85-130VAC, GRN/RED/YEL, 2M CBL, K50 SERIES |
| 11 | ||
| WEU26/3-103A00 (1047985) | SICK AG | PHOTOELECTRIC SENSOR, RECEIVER,1047985, SAFETY SWITCH, TYPE4, PL E, SIL3, SILCL |
| 5 | ||
2798530![]() | Phoenix Contact | SURGE PROTECTION DEVICE RoHS : Compliant |
| 2 | ||
| 2907985 | Phoenix Contact | ENERGY METER, DIN-MOUNT W/DISPLAY, MODBUS TCP + RTU, REST API, ROGOWSKI INPUT |
| 1 | ||
| 1879854 | RS Pro | MOTOR, 4 POLE, 0.55KW, F80, 230V/400V, FOOT MOUNT |
| 0 | ||
| 52737985 | WIKA Instrument LP | PRESSURE GAUGE;ANALOG;111.11;2";3000PSI;1/4" NPT;BACK MOUNT;ST-GOLD |
| 0 | ||
| 1-87985-0 | TE Connectivity | CONNECTOR, AMPMODU, 10 MODI BDMNT RCPT SR .156CL RoHS : Compliant |
| 0 | ||
| A3-7985-1 | Norgren | COMPONENT KIT FOR A3-7985 |
| 0 | ||
| 78072727985 | Norton Winter | 6 x 48In. Metalite Cloth Narrow Benchstand Belt 50 Grit R228 AO |
| 0 | ||
| CE.83798-5N | ELESA USA | DD52R-FR-00105-S-C2, MECHANICAL POSITION INDICATORS, MECHANICAL POSITION INDICA |
| 0 | ||
| T50L4M4 (70717985) | HellermannTyton | CABLE TIE, 50 LB., 15.35IN MAX. BUN. DIA. 4.33IN PA66, YELLOW |
| 0 | ||
| RSM RKM 579-8.5M (U-01311) | TURCK Inc | CORDSET, RSM RKM 579-8.5M, U-01311 |
| 0 | ||
| VA5AB10B-A9C00-000 (RCV-37107985 | VA5AB10B-A9C00-000 | VA5AB10BA9C00000) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
![]() STMicroelectronics | A7985ATR | STMicroelectronics | 2 A step-down switching regulator for automotive applications RoHS : Compliant |
| 4,183 | |
| L7985TR | STMicroelectronics | 2 A step-down switching regulator RoHS : Compliant |
| 3,024 | ||
| L7985ATR | STMicroelectronics | 2 A step-down switching regulator RoHS : Compliant |
| 3,006 | ||
| L7985A | STMicroelectronics | 2 A step-down switching regulator RoHS : Compliant |
| 2,472 | ||
![]() Bisco Industries | DIN7985-A2 M2.5X5MM | Crescent Manufacturing | 26,500 | |||
| D1N7985AA2M2.5X8 | MACHINE SCREWS | 1,782 | ||||
| D1N7985-M3X6-A2-70-Z | 800 | |||||
| D1N7985-M3X6-A4-70-Z LENS | MACHINE SCREWS | 575 | ||||
| 7985 A2 4X6 | MACHINE SCREWS | 400 | ||||
| MS17985C860 | Jergens Inc | 347 | ||||
| DIN7985 A2 M3.5X12 | MACHINE SCREWS | 311 | ||||
| D1N 7985-A2-M4-16 | MACHINE SCREWS | 220 | ||||
| MS17985C440 | Jergens Inc | 100 | ||||
| MS17985C313 | Jergens Inc | 90 | ||||
| DIN7985-M4X20 | MACHINE SCREWS | 75 | ||||
| D1N7985-A2-M3X8 | MACHINE SCREWS | 44 | ||||
| MS17985C1009 | MS Pins | 2 | ||||
| MS17985C845 | Jergens Inc | 1 | ||||
| MS17985C1216 | MS Pins | 1 | ||||
![]() Onlinecomponents.com | 2701-7985-00 | TE Connectivity | Conn SMA PL 26.5GHz 50Ohm Solder ST Cable Mount Gold Carton RoHS : Compliant |
| 690 | |
| 5807-7985-09 | TE Connectivity | MCX Connector - Plug - Male Pin - 50 Ohms - Snap-On Fastening - 6 GHz - 1 Port - 335 V - Solder Termination. RoHS : Compliant |
| 288 | ||
| 3001-7985-00 | TE Connectivity | N Series RF Connectors RoHS : Compliant |
| 241 | ||
| 3104-7985-00 | TE Connectivity | Conn TNC RCP 50Ohm Solder ST Cable Mount Gold RoHS : Compliant |
| 34 | ||
| 4710-7985-00 | TE Connectivity | Conn OSP Miniature Modular RCP 0Hz to 28GHz 50Ohm Solder ST Cable Mount Gold RoHS : Compliant |
| 14 | ||
| 3006-7985-00 | TE Connectivity | Conn Type N RCP 0Hz to 11GHz 50Ohm Solder ST Panel Mount Gold RoHS : Compliant |
| 14 | ||
| 2902-7985-62 | TE Connectivity | Conn OSMP RCP 0Hz to 40GHz 50Ohm Solder ST Cable Mount Gold RoHS : Compliant |
| 3 | ||
| 4503-7985-00 | TE Connectivity | Conn OSP Miniature Modular PL 0Hz to 22GHz 50Ohm Solder ST Panel Mount Gold RoHS : Compliant |
| 1 | ||
| 1001-7985-00 | TE Connectivity | The 1001-7985-00 is an SSMA subminiature coaxial straight cable plug designed for direct solder attachment to semi-rigid cable. RoHS : Compliant |
| 0 | ||
| 2004-7985-00 | TE Connectivity | Conn SMA RCP 0Hz to 18GHz 50Ohm Solder ST Panel Mount Gold RoHS : Compliant |
| 0 | ||
| 4801-7985-02 | TE Connectivity | Conn OS-2.9 PL Solder ST Cable Mount Gold RoHS : Compliant |
| 0 | ||
| 4703-7985-00 | TE Connectivity | Blind Mate RF Connectors RoHS : Compliant |
| 0 | ||
| 4706-7985-02 | TE Connectivity | Conn OSSP Subminiature Modular RCP 0Hz to 28GHz 50Ohm Solder ST Flange Mount Gold RoHS : Compliant |
| 0 | ||
| 3106-7985-00 | TE Connectivity | Conn TNC RCP 0Hz to 15GHz 50Ohm Solder ST Flange Mount Gold Carton RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | LC7985ND-8733-E | onsemi | STN-LCD CONTROLLER DRIVER RoHS : Compliant |
| 1,250 | |
![]() Sager | 9-5177985-1 | TE Connectivity | 0.8FH,R05H.5,040,03/SN,TR,SC |
| 0 | |
| 1-1879855-4 | TE Connectivity | Ferrite Beads BMB-B 0402 220R N7 RoHS : Compliant | 0 | |||
| 1-87985-0 | TE Connectivity | Headers & Wire Housings RCPT 10P VERT .156 RoHS : Compliant | 0 | |||
| 1-5177985-1 | TE Connectivity | 0.8FH,R05H.5,040,15/SN,TR,SC RoHS : Compliant | 0 | |||
| 9-2208798-5 | TE Connectivity | Automotive Connectors 6POS,0.64 GENER. Y,REC HSG,ASSY RoHS : Compliant |
| 0 | ||
| 9679854-0000 | TE Connectivity | COVER,PT1-SERIES,631903 | 0 | |||
| 07985002ZXS | Littelfuse Inc | Fuse Holder MDB5 PDM 70CDC |
| 0 | ||
| 87985-8 | TE Connectivity | Headers & Wire Housings 08 MODI BDMNT RCPT SR 0.156CL RoHS : Compliant | 0 | |||
| 5177985-1 | TE Connectivity | Board to Board & Mezzanine Connectors 0.8MM-05H REC 2X020P 3000 RoHS : Compliant |
| 0 | ||
| 679858-2 | TE Connectivity | Other Tools BLADE, SHEAR |
| 0 | ||
| 2427985-1 | TE Connectivity | EMI Gaskets, Sheets, Absorbers & Shielding CONN G SNG 38999 S3 SHELL 11 RoHS : Compliant |
| 0 | ||
| 209-3-28779-85 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 1879855-9 | TE Connectivity | Ferrite Beads BMB-A 0402 1000R N8 RoHS : Compliant | 0 | |||
| 11107985-00 | TE Connectivity | 1 PSI, 1/2MNPT, 1-5V, CABLE, 4FT., 316L |
| 0 | ||
| 44A7985-X-9CS1663 | TE Connectivity | TE Connectivity | 0 | |||
![]() Coilcraft Direct | CR7985-CLD | Coilcraft Inc | Transformer for ADuM4070, SMT, RoHS RoHS : Compliant |
| 510 | |
![]() TME | M3X6/D7985B | Kraftberg | Screw; M3; M3x6; 0.5; Head: cheese head; Phillips; PH1; DIN 7985 |
| 521,500 | |
| M3X16/D7985-A2 | Kraftberg | Screw; M3; M3x16; 0.5; Head: cheese head; Phillips; DIN 7985 |
| 39,300 | ||
| M3X16/D7985 | Kraftberg | Screw; M3; M3x16; 0.5; Head: cheese head; Phillips; PH1; steel; zinc |
| 32,900 | ||
| M3X16/D7985B | Kraftberg | Screw; M3; M3x16; 0.5; Head: cheese head; Phillips; PH1; DIN 7985 |
| 26,400 | ||
| M3X4/D7985-A4 | Kraftberg | Screw; M3; M3x4; 0.5; Head: cheese head; Phillips; DIN 7985 |
| 15,700 | ||
| M3X3/D7985-A2 | Kraftberg | Screw; M3; M3x3; 0.5; Head: cheese head; Phillips; DIN 7985 |
| 14,500 | ||
| M3X25/D7985B | Kraftberg | Screw; M3; M3x25; 0.5; Head: cheese head; Phillips; PH1; DIN 7985 |
| 14,300 | ||
| M2.5X14/D7985-A2 | Kraftberg | Screw; M2,5; M2.5x14; 0.45; Head: cheese head; Phillips; DIN 7985 |
| 12,800 | ||
| M2X5/D7985-A4 | Kraftberg | Screw; M2; M2x5; 0.4; Head: cheese head; Phillips; DIN 7985 |
| 3,800 | ||
| M2.5X6/D7985-A4 | Kraftberg | Screw; M2,5; M2.5x6; 0.45; Head: cheese head; Phillips; DIN 7985 |
| 2,200 | ||
| M3X45/D7985-A4 | Kraftberg | Screw; M3; M3x45; 0.5; Head: cheese head; Phillips; DIN 7985 |
| 1,800 | ||
| M2.5X10/D7985-A4 | Kraftberg | Screw; M2,5; M2.5x10; 0.45; Head: cheese head; Phillips; DIN 7985 |
| 1,600 | ||
| L7985A | STMicroelectronics | Driver; DC/DC converter; Uin: 4.5÷38VDC; Uout: 0.6÷38VDC; 2A; HSOP8 RoHS : Compliant |
| 50 | ||
| MAT9861798 5M | igus Inc | Cable: servo drive; 5m; Standard: Allen Bradley; chainflex |
| 0 | ||
| SHRDIN7985M5X11HPSA1 | Infineon Technologies AG | Accessories: mounting screw; 11mm; Thread: M5; Head: cheese head |
| 0 | ||
![]() Ameya Holding Limited | BU7985KVT![]() | ROHM Semiconductor | RoHS : Compliant |
| 20 | |
![]() ComSIT USA | DIN7985M3X6A2 | EE & I, INC/GLOBAL SUPPLY LLC | AVAILABLE EU | 776 | ||
| 40DIN7985A03006CAZZZZ | FASTENER SERVICE CORP. | AVAILABLE EU | 5,368 | |||
![]() ComSIT USA | L7985ATR | STMicroelectronics | Switching Regulator, Voltage-mode, 2A, 275kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 17,795 | ||
| L7985TR | STMicroelectronics | 2 A STEP-DOWN SWITCHING REGULATOR Switching Regulator, Voltage-mode, 2A, 275kHz Switching Freq-Max, PDSO10 RoHS : Compliant | 5,000 | |||
![]() Interstate Connecting Components | 1798500000 | Weidmüller Interface GmbH & Co. KG | BCZ 3.81/02/90 SN BK BX RoHS : Compliant |
| 12 | |
| Y-84279859-0000000 | TE Connectivity | DT04-12PC-B016 W/ WEDGE&PLUG | 0 | |||
| 9-5177985-1 | TE Connectivity | 0.8FH,R05H.5,040,03/SN,TR,SC | 0 | |||
| 1-5177985-1 | TE Connectivity | 0.8FH,R05H.5,040,15/SN,TR,SC RoHS : Compliant | 0 | |||
| 9-2208798-5 | TE Connectivity | 6POS,0.64 GENER. Y,REC HSG,ASS RoHS : Compliant |
| 0 | ||
| 5177985-1 | TE Connectivity | 0.8FHR05H.504008/SnTRSC RoHS : Compliant |
| 0 | ||
| 679858-2 | TE Connectivity |
| 0 | |||
| 2427985-1 | TE Connectivity | CONN G SNG 38999 S3 SHELL 11 RoHS : Compliant | 0 | |||
| 11107985-00 | TE Connectivity | 1 PSI, 1/2MNPT, 1-5V, CABLE, 4 | 0 | |||
| ZPF000000000117985 | TE Connectivity | CONTACT M 3 - AG - ALES.2,3 S | 0 | |||
| 297985-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR54AC90-2812AI RoHS : Compliant | 0 | |||
| 8-1534798-5 | TE Connectivity | AMP DUOPLUG MK2 CONNECTOR 5P S RoHS : Compliant | 0 | |||
| 4-1971798-5 | TE Connectivity | NEW GI CONN2.5 HDR ASMBLY 4P B RoHS : Compliant |
| 0 | ||
| 5177985-2 | TE Connectivity | 0.8FHR05H.506008/SnTRSC RoHS : Compliant |
| 0 | ||
| 5177985-8 | TE Connectivity | 0.8FHR05H.516008/SnTRSC RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | MDM-98479-85 | ITT Interconnect Solutions |
| 0 | ||
![]() Powell Electronics | A87985-000 | TE Connectivity | Connectors RoHS : Compliant |
| 52,800 | |
| 5177985-3 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 23,350 | ||
| 4-1971798-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 18,716 | ||
| 44A7985-X-9CS1663 | TE Connectivity | CABLE-PROTECTION PART 44A7985-X-9CS1663 |
| 2,935 | ||
| 5177985-8 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 1,795 | ||
| 5177985-5 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 1,567 | ||
| 5177985-1 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 1,310 | ||
| 5177985-4 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 805 | ||
| 2-1971798-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 91 | ||
| 679858-2 | TE Connectivity | BLADE, SHEAR |
| 19 | ||
| 679857-3 | TE Connectivity | CRIMPER, WIRE F |
| 5 | ||
| 17985001 | Hartmann Electronic | AERO RELAY/CONTACTOR 17985001 |
| 4 | ||
| 9679854-0000 | TE Connectivity | SENSOR 9679854-0000 |
| 3 | ||
| R-8798-5 | TE Connectivity | SENSOR R-8798-5 |
| 1 | ||
| Y5015-000000077985 | TE Connectivity | Connectors |
| 1 | ||
![]() PUI | 12.87985 | 40,044 | ||||
![]() Richardson RFPD | SI47985A0GE1AM | Skyworks Solutions Inc | Hybrid SDR Automotive Tuner RoHS : Compliant |
| 0 | |
| EVAL-AD7985FMCZ | Analog Devices Inc | AD7985 ADC Evaluation Board 2.5MSPS RoHS : Compliant |
| 0 | ||
AD7985BCPZ![]() | Analog Devices Inc | 1-Channel Single ADC SAR 2.5Msps 16-bit Serial 20- RoHS : Compliant |
| 0 | ||
AD7985BCPZ-RL7![]() | Analog Devices Inc | 1-Channel Single ADC SAR 2.5Msps 16-bit Serial 20- RoHS : Compliant |
| 0 | ||
| 935280798518 | NXP Semiconductors | I2C Interface 100kHz/400kHz 5.5V 56-Pin TSSOP T/R RoHS : Compliant | 0 | |||
| EVAL-AD7985EBZ | Analog Devices Inc | AD7985BCPZ/AD7985BCPZ-RL7 ADC Evaluation Board 2.5 RoHS : Compliant | 0 | |||
| 5177985-6 | TE Connectivity | Conn Fine Pitch Connector RCP 140 POS 0.8mm Solder RoHS : Compliant | 0 | |||
| SI47985A0GE1AMR | Skyworks Solutions Inc | SI47985A0GE1AMR RoHS : Compliant |
| 0 | ||
| 935396798557 | NXP Semiconductors | SOC ARMCortex M7 40nm 144-Pin LQFP Tray RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | A87985-000 | TE Connectivity | INSTOCK RoHS : Compliant | 141,700 | ||
| 5177985-3 | TE Connectivity | INSTOCK RoHS : Compliant | 57,463 | |||
| 12.87985 | Geyer Electronic E K | INSTOCK | 40,044 | |||
| L7985ATR | Sangdest Microelectronics (Nanjing) Co Ltd | INSTOCK | 38,919 | |||
| 5177985-1 | TE Connectivity | INSTOCK RoHS : Compliant | 28,446 | |||
| DIN7985 | INSTOCK | 27,641 | ||||
| 5177985-2 | TE Connectivity | INSTOCK RoHS : Compliant | 11,832 | |||
| 5177985-4 | TE Connectivity | INSTOCK RoHS : Compliant | 8,325 | |||
| 5177985-6 | TE Connectivity | INSTOCK RoHS : Compliant | 5,460 | |||
| 5177985-5 | TE Connectivity | INSTOCK RoHS : Compliant | 5,153 | |||
| 5177985-8 | TE Connectivity | INSTOCK RoHS : Compliant | 4,446 | |||
| AM7985AJC10 | AMD | INSTOCK | 299 | |||
![]() Avnet Abacus | 5177985-1 | TE Connectivity | Mezzanine Connector Receptacle 08 mm 2 Rows 40 Contacts Surface Mount Beryllium Copper (Alt: 5177985-1) RoHS : Compliant | 18,000 | ||
| 5177985-5 | TE Connectivity | - Tape and Reel (Alt: 5177985-5) RoHS : Compliant | 1,400 | |||
| 1779851 | Phoenix Contact | MSTBT 25 4ST MSTBT254ST (Alt: 1779851) RoHS : Compliant | 300 | |||
| 87985-8 | TE Connectivity | (Alt: 87985-8) RoHS : Compliant | 0 | |||
| 1798511 | Phoenix Contact | MSTB 25 2ST508BKBDWHUSV MSTB252ST508BKBDWHUSV (Alt: 1798511) RoHS : Compliant | 0 | |||
| 679858-2 | TE Connectivity | (Alt: 679858-2) RoHS : Not Compliant | 0 | |||
| 1-87985-0 | TE Connectivity | (Alt: 1-87985-0) RoHS : Compliant | 0 | |||
| 2427985-1 | TE Connectivity | Conn G SNG 38999 S3 Shell 11 (Alt: 2427985-1) RoHS : Compliant | 0 | |||
| 5177985-2 | TE Connectivity | (Alt: 5177985-2) RoHS : Compliant | 0 | |||
| 5177985-2 | TE Connectivity | (Alt: 5177985-2) RoHS : Compliant | 0 | |||
| 5177985-8 | TE Connectivity | (Alt: 5177985-8) RoHS : Compliant | 0 | |||
| 297985-000 | TE Connectivity | (Alt: 297985-000) RoHS : Compliant | 0 | |||
| 1798500000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1798500000) RoHS : Compliant | 0 | |||
| 9-2208798-5 | TE Connectivity | (Alt: 9-2208798-5) RoHS : Compliant | 0 | |||
| 8-2151798-5 | TE Connectivity | (Alt: 8-2151798-5) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | 5177985-5 | TE Connectivity | (Alt: 5177985-5) RoHS : Compliant | 0 | ||
| 6-1971798-5 | TE Connectivity | (Alt: 6-1971798-5) RoHS : Compliant | 0 | |||
| 1-5177985-7 | TE Connectivity | CONN SMD HOUSING 80P 2R FS(P0.8,H3.75) (Alt: 1-5177985-7) RoHS : Compliant | 0 | |||
| 5177985-4 | TE Connectivity | Stacking Board Connector, Free Height (FH), 100 Contacts, Receptacle, 0.8 mm, Surface Mount (Alt: 5177985-4) RoHS : Compliant | 0 | |||
| 5177985-6 | TE Connectivity | Mezzanine Connector, Receptacle, 0.8 mm, 2 Rows, 140 Contacts, Surface Mount, Copper Alloy (Alt: 5177985-6) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | L7985ATR | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985ATR) RoHS : Compliant | 15,000 | ||
| L7985A | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985A) RoHS : Compliant | 2,000 | |||
| L7985TR | STMicroelectronics | Conv DCDC Single Step Down 45V to 38V 10Pin VFQFPN EP TR (Alt: L7985TR) RoHS : Compliant | 0 | |||
| A7985ATR | STMicroelectronics | Conv DCDC Single Step Down 45V to 38V 8Pin HSOP EP TR (Alt: A7985ATR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | DIN7985 | IN STOCK SHIP TODAY | 5,977 | |||
| DIN7985-4.8 | IN STOCK SHIP TODAY |
| 2,900 | |||
| 5177985-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,040 | ||
| L1A7985 | LSI Corporation | IN STOCK SHIP TODAY | 956 | |||
| 79850-111LF | Amphenol FCi | IN STOCK SHIP TODAY | 950 | |||
| 7985-2.514-S | IN STOCK SHIP TODAY |
| 900 | |||
| 177985-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 742 | ||
| 7985A2PH5X60 | BRIKKSEN | IN STOCK SHIP TODAY |
| 300 | ||
| 747985-1 | TE Connectivity | IN STOCK SHIP TODAY | 38 | |||
| 2207-7985-09 | MACOM | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | DIN7985-A2-M3X20 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 5,000 | |
| DIN7985-A4-M2.5X8 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 1,764 | ||
| DIN7985-M3X6-STL-ZY | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 1,500 | ||
| DIN7985-A4-M2.5X12 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 1,131 | ||
| DIN7985-A2-M4X6 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 679 | ||
| DIN7985-A2-M4X20 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 500 | ||
| DIN7985-A4-M2.5X10 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 260 | ||
| DIN7985A-M4X30-POZI-ZI | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 130 | ||
| DIN7985A-A2-M6X16-BO | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 100 | ||
| DIN7985-M6X12-STL-ZI | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 94 | ||
| DIN7985-A2-M2X4 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 14 | ||
| DIN7985-A2-M1.6X4 | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 10 | ||
| 125M37-9.85-02-NTP | Tech-Etch | STICKON, NO-SNAG SM2319 | 0 | |||
| 47985 | Avdel | M6UFO45AL 2K | 0 | |||
![]() EBV Elektronik | L7985A | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985A) RoHS : Compliant | 300 | ||
| L7985TR | STMicroelectronics | Conv DCDC Single Step Down 45V to 38V 10Pin VFQFPN EP TR (Alt: L7985TR) RoHS : Compliant | 0 | |||
| A7985ATR | STMicroelectronics | Conv DCDC Single Step Down 45V to 38V 8Pin HSOP EP TR (Alt: A7985ATR) RoHS : Compliant | 0 | |||
| L7985ATR | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985ATR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 2001-7985-02 | MACOM | RF / Coaxial | 4 | ||
![]() Maritex | SP-M4X6-DIN7985-P65 | NiViss | Screw M4x6; pan head; DIN7985-SO7045; aluminium anodized P65; Philips PH2., |
| 12,931 | |
| SP-M4X8-DIN7985-7075-T6 | NiViss | Screw M4x8; pan head; DIN7985-ISO7045; aluminium alloy 7075-T6; Philips PH2. |
| 11,195 | ||
| SP-M5X8-DIN7985-7075-T6 | NiViss | Screw M5x8; pan head; DIN7985-ISO7045; aluminium alloy 7075-T6; Philips PH2. |
| 7,110 | ||
| SP-M2.5X3-DIN7985-A2-TX | NiViss | Screw M2.5x3; pan head; DIN7985; stainless steel A2; torx TX8. |
| 4,122 | ||
| 5177985-6 | TE Connectivity | Rectangular Connector Housings; 5177985-6; TE CONNECTIVITY; 2; 140; 140 RoHS : Compliant |
| 648 | ||
![]() Master Electronics | 5177985-1 | TE Connectivity | 0.8FH R05H.5 040 08/Sn TR SC RoHS : Compliant |
| 3,265 | |
| 2902-7985-62 | TE Connectivity | Conn OSMP RCP 0Hz to 40GHz 50Ohm Solder ST Cable Mount Gold RoHS : Compliant |
| 3 | ||
| 9-5177985-1 | TE Connectivity | 0.8FH R05H.5 040 03/SN TR SC MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-87985-0 | TE Connectivity | 10 MODI BDMNT RCPT SR .156CL MOQ Reduction RoHS : Compliant |
| 0 | ||
| HCSD-03-S-79.85-01-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 9-2208798-5 | TE Connectivity | 6POS 0.64 GENER. Y REC HSG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| FFMD-03-D-79.85-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 4801-7985-02 | TE Connectivity | Conn OS-2.9 PL Solder ST Cable Mount Gold MOQ Reduction RoHS : Compliant |
| 0 | ||
| 9679854-0000 | TE Connectivity | COVER PT1-SERIES 631903 RoHS : Compliant |
| 0 | ||
| 87985-8 | TE Connectivity | 08 MODI BDMNT RCPT SR .156CL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 679858-2 | TE Connectivity | BLADE SHEAR RoHS : Not Compliant |
| 0 | ||
| 2427985-1 | TE Connectivity | Conn G SNG 38999 S3 Shell 11 RoHS : Compliant |
| 0 | ||
| 209-3-28779-85 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 3 Pole 209 Series | Sensata - Airpax 209-3-28779-85 RoHS : Compliant |
| 0 | ||
| 11107985-00 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 44A7985-X-9CS1663 | TE Connectivity | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 07985003ZXS | Littelfuse Inc | Fuse Holder MDB5 PDM 32V w/ SEAL KIT |
| 50 | |
| 07985001ZXS | Littelfuse Inc | Fuse Holder MDB5 PDM 32VDC |
| 50 | ||
| 07985002ZXS | Littelfuse Inc | Fuse Holder MDB5 PDM 70CDC |
| 8 | ||
| EXPRESS-CFR-I7-9850HE | ADLINK Technology Inc | Computer-On-Modules - COM Basic size type 6 COM Express module with 9th Core i7-9850HE hexa core processor at 2.7/4.4GHz with QM370 chipset, 3 SO-DIMM |
| 0 | ||
| 1779851 | Phoenix Contact | PCB connector, Female, Screw 5mm 12AWG 320V 12A, 1row 4 Pos, MSTBT 2,5/ 4-ST RoHS : Compliant |
| 0 | ||
| AXG97985 | Axiom Manufacturing | AXIOM 4FT CAT6A BENDNFLEX CAB (ORANGE) |
| 0 | ||
| 2907985 | Phoenix Contact | Energy meter, DIN-mount w/display, Modbus TCP + RTU, REST API, Rogowski input |
| 0 | ||
| 2987985 | Phoenix Contact | Single Relay, DPDT, 24VDC coil, switching: 250VUC 8A w/o Gold, REL-MR- 24DC/21-21AU/MS RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W07985 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using RG213 Coax. PE3W07985 is a N male to UHF male cable using RG213 coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07985 N male to UHF male cable assembly is constructed with RG213 coax. | 0 | ||
| PE3C7985 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985 can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985 can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE37985 | Pasternack Enterprises | 0 | ||||
| PE3C7985-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-100CM can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-100CM can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-12 can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-12 can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-150CM can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-150CM can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-200CM can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-200CM can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-24 can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-24 can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-36 can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-36 can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-48 can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-48 can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C7985-50CM can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7985-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7985-50CM can also be used in the other direction and will be a right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7985-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402-LF, RF Cable Type: TFT-402-LF, RF Cable Impedance: 50 Ohm, Length: 60 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 60 Inch Length Using TFT-402-LF Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 60 inch length using TFT-402-LF coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 male right angle low PIM cable 60 inch length using TFT-402-LF coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 4.3-10 cable is a male to male coax assembly, PE3C7985-60, can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7985-60 is built with TFT-402-LF which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7985-60 can also be used in the other direction and will be right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male right angle low PIM cable 60 inch length using TFT-402-LF coax using Times Microwave components. |
| 0 | ||
![]() TE Connectivity | 5177985-3 | TE Connectivity | 0.8FH,R05H.5,080,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 80 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-3 | Internal Number: 5177985-3 | TE Connectivity RoHS : Compliant |
| 4,028 | |
| 5177985-4 | TE Connectivity | 0.8FH,R05H.5,100,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 100 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-4 | Internal Number: 5177985-4 | TE Connectivity RoHS : Compliant |
| 2,469 | ||
| 5177985-2 | TE Connectivity | 0.8FH,R05H.5,060,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 60 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-2 | Internal Number: 5177985-2 | TE Connectivity RoHS : Compliant |
| 2,344 | ||
| 5177985-1 | TE Connectivity | 0.8FH,R05H.5,040,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 40 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-1 | Internal Number: 5177985-1 | TE Connectivity RoHS : Compliant |
| 2,148 | ||
| 5177985-5 | TE Connectivity | 0.8FH,R05H.5,120,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 120 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-5 | Internal Number: 5177985-5 | TE Connectivity RoHS : Compliant |
| 1,261 | ||
| 5177985-6 | TE Connectivity | 0.8FH,R05H.5,140,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 140 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-6 | Internal Number: 5177985-6 | TE Connectivity RoHS : Compliant |
| 787 | ||
![]() Vyrian | A7985A | STMicroelectronics | Switching Regulator, Voltage-mode, 2A, 275kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 13,313 | ||
| MAX77985AEFD | Analog Devices (Maxim Integrated) | 12,161 | ||||
| MAX77985BEFD | Analog Devices (Maxim Integrated) | 11,553 | ||||
| MAX77985AEVKIT | Analog Devices (Maxim Integrated) | 10,437 | ||||
| EVAL-AD7985FMCZ | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 9,168 | |||
| 87985-8 | TE Connectivity | Board Connector, 8 Contact(s), 1 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Compliant | 8,817 | |||
| EVAL-AD7985EBZ | Analog Devices Inc | 7,952 | ||||
AD7985BCPZ-RL7![]() | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS RoHS : Compliant | 7,951 | |||
| MAX77985BEVKIT | Analog Devices (Maxim Integrated) | 7,876 | ||||
| L7985 | STMicroelectronics | Switching Regulator, Voltage-mode, 2A, 275kHz Switching Freq-Max, PDSO10 RoHS : Compliant | 6,973 | |||
| 5962-01-379-8588 | Texas Instruments | AND Gate, TTL, PDIP14 RoHS : Not Compliant | 6,339 | |||
AD7985BCPZ![]() | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS RoHS : Compliant | 6,138 | |||
| MAX77985BEFD+T | Analog Devices Inc | Power Supply Management Circuit RoHS : Compliant | 5,929 | |||
| 4706-7985-02 | TE Connectivity | RF Connector, 1 Contact(s), Female, Panel Mount, Solder Terminal, Jack RoHS : Compliant | 5,713 | |||
| 000L79850 | ITT Interconnect Solutions | MIL Series Connector, 5 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug | 773 | |||
![]() Waytek, Inc. | 07985003ZXS | Littelfuse Inc | MDM5 Sealed Power Distribution Module, 5 Pole, MIDI/AMI Fuse 32V |
| 76 | |
![]() Win Source Electronics | L7985A | STMicroelectronics | IC REG BUCK ADJUSTABLE 2A 8HSOP RoHS : Compliant |
| 30,000 | |
| L7985ATR | STMicroelectronics | IC REG BUCK ADJUSTABLE 2A 8HSOP / Voltage feed-forward RoHS : Compliant |
| 30,000 | ||
TPS79850QDGNRQ1![]() | Texas Instruments | 50 mA, 3 V TO 50 V, MICROPOWER, LOW-DROPOUT LINEAR REGULATOR RoHS : Compliant |
| 10,000 | ||
| 5177985-3 | TE Connectivity | RECEPTACLE ASSEMBLY 5H TYPE | CONN RCPT 80POS SMD GOLD RoHS : Compliant |
| 8,542 | ||
| L7985TR | STMicroelectronics | IC REG BUCK ADJ 2A 10VDFPN RoHS : Compliant |
| 6,145 | ||
| A7985ATR | STMicroelectronics | Conv DC-DC 4.5V to 38V Synchronous Step Down Single-Out 0.6V to 38V 2A Automotive 8-Pin HSOP EP T/R / 2 A step-down switching regulator for automotive applications | IC REG BUCK ADJUSTABLE 2A 8HSOP RoHS : Compliant |
| 4,818 | ||
| 5177985-2 | TE Connectivity | CONN RCPT 60POS .8MM FH 5H 8AU RoHS : Compliant |
| 2,470 | ||
AD7985BCPZ![]() | Analog Devices Inc | 16-Bit, 2.5 MSPS, PulSAR 15.5 mW ADC in LFCSP | IC ADC 16BIT SAR 20LFCSP-WQ RoHS : Compliant |
| 100 | ||
AD7985BCPZ-RL7![]() | Analog Devices Inc | IC ADC 16BIT SAR 20LFCSP / 16 Bit Analog to Digital Converter 1 Input 1 SAR 20-LFCSP (4x4) RoHS : Compliant |
| 90 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |