| Electronic Components Datasheet Search |
|
7860 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 1017860000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; PIN: 2 RoHS : Compliant |
| 160 | |
| 1827860000 | Weidmüller Interface GmbH & Co. KG | Grommet; black; UL94V-0; plastic; IP54 |
| 60 | ||
| 05059786001 | Wera | Screwdriver bit: Phillips; PH2; 1/4"; Overall len: 152mm |
| 25 | ||
| HCPL-7860-000E | Broadcom Limited | Optocoupler; THT; Ch: 4; OUT: isolation amplifier; 3.75kV; DIP8 RoHS : Compliant |
| 0 | ||
| 00117860 | GSR | Tap: metric-set; M18; fine thread,left hand thread; 1.5; L: 80mm |
| 0 | ||
| 10147860 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 26; SMT; 3A; 100V |
| 0 | ||
| 215786-0100 | Molex | Tool: aplicator; 22AWG; MX150 |
| 0 | ||
| 2627860000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 51A RoHS : Compliant |
| 0 | ||
| 304 078 60 | felo | Screwdriver: standard; 6-angles socket; HEX 7mm |
| 0 | ||
| 68786-0002 | Molex | Cable; HDMI plug; 1.5m; black; 34AWG; Shielding: shielded |
| 0 | ||
| 7000-44001-7860200 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; 2m; 60VDC; 60VAC; 4A; Cores: 2; PUR |
| 0 | ||
| 7000-44021-7860750 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male angled,M12 female angled |
| 0 | ||
| 1467860000 | Weidmüller Interface GmbH & Co. KG | Connector: M12; plug; PIN: 4; male; industrial; SAI; angled; IP67 RoHS : Compliant |
| 0 | ||
| 215786-0110 | Molex | Tool: aplicator; pneumatic; MX150 |
| 0 | ||
| 78601/2JC | Murata Manufacturing Co Ltd | Transformer: impulse; SMD; 12.7x9x6.35mm; 350uH; 0÷70°C; Trans: 1: 1 RoHS : Compliant |
| 0 | ||
![]() Verical | 78600-097 | Visual Communications Company | 78600-097 |
| 75 | |
| 78600-101 | Visual Communications Company | 78600-101 |
| 67 | ||
| 78604/16C | Murata Manufacturing Co Ltd | Pulse Transformer 2:1 1000Vrms 0.85Ohm Prim. DCR 50pF 6 Terminal PC Pin Thru-Hole |
| 50 | ||
| 78.60.1.230.2402 | FINDER SpA | 78.60.1.230.2402 |
| 1 | ||
![]() Avnet Americas | RT78602 | TE Connectivity | Relay Socket, Through Hole, PC Pin, 8 Pins, 250 VAC, RT - Boxed Product (Development Kits) (Alt: 1860991-1) RoHS : Not Compliant |
| 11,200 | |
| 78601/1JC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78601/1JC) RoHS : Compliant |
| 50 | ||
| 78601/9JC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78601/9JC) RoHS : Compliant |
| 49 | ||
| 1-499786-0 | TE Connectivity | - Trays (Alt: 1-499786-0) RoHS : Not Compliant | 18 | |||
| 63827-8600 | Molex | Hand Crimp Tool, 207129 Series, Ditto Wing Hermaphroditic Interconnects Terminals, 26 to 24 AWG - Bulk (Alt: 0638278600) RoHS : Compliant |
| 0 | ||
| 78604/2MC-R | Murata Manufacturing Co Ltd | Pulse Transformer 2:1 1000Vrms 0.34Ohm Prim. DCR 13pF 10Vus Surface Mount - Tape and Reel (Alt: 78604/2MC-R) RoHS : Compliant |
| 0 | ||
| 78601/2MC-R | Murata Manufacturing Co Ltd | Pulse Transformer 1:1 1000Vrms 0.34Ohm Prim. DCR 22pF 10Vus Surface Mount - Tape and Reel (Alt: 78601/2MC-R) RoHS : Compliant |
| 0 | ||
| 78602/4JC-R | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: 78602/4JC-R) RoHS : Compliant |
| 0 | ||
| 78601/3JC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78601/3JC) RoHS : Compliant |
| 0 | ||
| 78604/8C | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78604/8C) RoHS : Compliant |
| 0 | ||
| 2377860-1 | TE Connectivity | 11POS,HYBRID,REC HSG ASSY,UNSLD,COD A - Bulk (Alt: 2377860-1) RoHS : Not Compliant |
| 0 | ||
| 78602/8JC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78602/8JC) RoHS : Compliant |
| 0 | ||
| 78604/2C | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: 78604/2C) RoHS : Compliant |
| 0 | ||
| 2278600-3 | TE Connectivity | Connector Wire to Board Housing Receptacle 52 Position Crimp Straight Cable Mount - Boxed Product (Development Kits) (Alt: 2278600-3) RoHS : Not Compliant |
| 0 | ||
| 11-31-7860 | Molex | - Bulk (Alt: 0011317860) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 78601/1JC-R | Murata Manufacturing Co Ltd | Pulse Transformers SM TRANSFORMER RoHS : Compliant |
| 1,797 | |
| 78601/9JC-R | Murata Manufacturing Co Ltd | Pulse Transformers SMD TRANSFORMER 1:1: 1K UH RoHS : Compliant |
| 601 | ||
| 78602/16JC-R | Murata Manufacturing Co Ltd | Pulse Transformers TRANSFORMER 1:1:1 3.35MH RoHS : Compliant |
| 595 | ||
| 78602/1JC-R | Murata Manufacturing Co Ltd | Pulse Transformers 1:1:1 TRN 1.89 MH RoHS : Compliant |
| 373 | ||
| 78601/9JC | Murata Manufacturing Co Ltd | Pulse Transformers SM TRANSFORMER RoHS : Compliant |
| 362 | ||
| 78601/3JC | Murata Manufacturing Co Ltd | Pulse Transformers TRANSFORMER 1:1 105UH RoHS : Compliant |
| 196 | ||
| 78602/8JC-R | Murata Manufacturing Co Ltd | Pulse Transformers RoHS : Compliant |
| 184 | ||
| 78601/9C | Murata Manufacturing Co Ltd | Pulse Transformers TRANSFORMER 1:1 10K UH 56V RoHS : Compliant |
| 158 | ||
| 78601/4JC-R | Murata Manufacturing Co Ltd | Pulse Transformers RoHS : Compliant |
| 122 | ||
| 78601/3C | Murata Manufacturing Co Ltd | Pulse Transformers 1:1 TRN 200 UH RoHS : Compliant |
| 96 | ||
| 78601/1JC | Murata Manufacturing Co Ltd | Pulse Transformers SM TRANSFORMER RoHS : Compliant |
| 87 | ||
| 78601/2JC-R | Murata Manufacturing Co Ltd | Pulse Transformers 350 UH 1:1 TRN RoHS : Compliant |
| 87 | ||
| 78601/2C | Murata Manufacturing Co Ltd | Pulse Transformers Transformer 1:1 500uH 10Vus RoHS : Compliant |
| 74 | ||
| 78602/9JC | Murata Manufacturing Co Ltd | Pulse Transformers TFMR 1:1:1, 56VUS SM TOROID RoHS : Compliant |
| 44 | ||
| 78602/9C | Murata Manufacturing Co Ltd | Pulse Transformers TRANSFORMER 1:1:1 10000UH 56V RoHS : Compliant |
| 43 | ||
![]() Arrow Electronics | 78604/16C | Murata Power Solutions | Pulse Transformer 2:1 1000Vrms 0.85Ohm Prim. DCR 50pF 6 Terminal Pin Thru-Hole RoHS : Exempt |
| 50 | |
| 78602/16C | Murata Power Solutions | Pulse Transformer 1:1:1 1000Vrms 0.92Ohm Prim. DCR 116pF 6 Terminal Pin Thru-Hole RoHS : Exempt |
| 3 | ||
![]() Newark | 7447860056 | Wurth Elektronik | Inductor, 5.6Nh, 4Ghz, 0.3A, 0603; |Würth Elektronik 7447860056 RoHS : Compliant |
| 5,853 | |
| 7447860056 | Wurth Elektronik | Inductor, 5.6Nh, 4Ghz, 0.3A, 0603; |Würth Elektronik 7447860056 RoHS : Compliant |
| 5,853 | ||
| 7447860015G | Wurth Elektronik | Multilayer Inductor, 1.5Nh, 0.3A, 0603; |Würth Elektronik 7447860015G RoHS : Compliant |
| 3,070 | ||
| 7447860015G | Wurth Elektronik | Multilayer Inductor, 1.5Nh, 0.3A, 0603; |Würth Elektronik 7447860015G RoHS : Compliant |
| 3,070 | ||
| 7447860222G | Wurth Elektronik | Multilayer Inductor, 220Nh, 0.3A, 0603; |Würth Elektronik 7447860222G RoHS : Compliant |
| 2,544 | ||
| 7447860222G | Wurth Elektronik | Multilayer Inductor, 220Nh, 0.3A, 0603; |Würth Elektronik 7447860222G RoHS : Compliant |
| 2,544 | ||
| 7447860218 | Wurth Elektronik | Inductor, 180Nh, 400Mhz, 0.3A, 0603; |Würth Elektronik 7447860218 RoHS : Compliant |
| 2,540 | ||
| 7447860218 | Wurth Elektronik | Inductor, 180Nh, 400Mhz, 0.3A, 0603; |Würth Elektronik 7447860218 RoHS : Compliant |
| 2,540 | ||
| 7447860168 | Wurth Elektronik | Inductor, 68Nh, 700Mhz, 0.3A, 0603; |Würth Elektronik 7447860168 RoHS : Compliant |
| 1,105 | ||
| 7447860168 | Wurth Elektronik | Inductor, 68Nh, 700Mhz, 0.3A, 0603; |Würth Elektronik 7447860168 RoHS : Compliant |
| 1,105 | ||
| 7447786004 | Wurth Elektronik | Choke, 4.7Uh, 25%, 2.8A, Power; |Würth Elektronik 7447786004 RoHS : Compliant |
| 915 | ||
| 7447786004 | Wurth Elektronik | Choke, 4.7Uh, 25%, 2.8A, Power; |Würth Elektronik 7447786004 RoHS : Compliant |
| 915 | ||
| 8786 060U500 | Belden Inc | Multiconductor Cable, Shielded; |Belden 8786 060U500 RoHS : Compliant |
| 500 | ||
| FMCA3178-60 | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA3178-60 RoHS : Not Compliant |
| 297 | ||
| 7860 | Legrand North America LLC | Nema 3R Enclosure; |Legrand Pass & Seymour 7860 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | LTC7860MPMSE#TRPBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 5,000 | |
| LTC7860HMSE#PBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 4,304 | ||
| LTC7860EMSE#TRPBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 2,870 | ||
| LTC7860IMSE#TRPBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 2,500 | ||
| MAX77860EWG+ | Analog Devices Inc | New Generation Standalone Char RoHS : Compliant | 606 | |||
| LTC7860EMSE#PBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 510 | ||
| LTC7860IMSE#PBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 394 | ||
| LTC7860MPMSE#PBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 297 | ||
| MAX77860EWG+T | Analog Devices Inc | New Generation Standalone Char RoHS : Compliant |
| 76 | ||
| MAX77860EVKIT# | Analog Devices Inc | EVKIT for New Generation Stand |
| 7 | ||
| LTC7860HMSE#TRPBF | Analog Devices Inc | Hi Eff Sw Surge Stopper RoHS : Compliant |
| 0 | ||
![]() RS | 6AV78601EY000AA0 | Siemens | SIMATIC IFP V2.. CAT6 CONNECTOR ; 6AV78601EY000AA0 |
| 50 | |
| 7447786008 (6690429) | Wurth Elektronik | POWER INDUCTOR SMD WE-PD XSH 8.2UH 2.1A |
| 50 | ||
| SMT-8G-PS-24V-E-0,3Q-M8D (547860) | Festo | MAGNETIC RESISTIVE PROXIMITY SENSOR FOR T SLOT, 10-30V, NO CONTACT, PNP |
| 41 | ||
| 0816786 (0816786 (PK/2500)) | Phoenix Contact | LABELS, ADHESIVE, WHITE, UNLABELED, 20 MM X 8 MM, 2500 PIECES, EML SERIES |
| 35 | ||
| FP-301-3-48"-RED (7100027860) | 3M | HEAT SHRINK TUBING, 3IN, 2:1, 48IN, RED, FP-301 SERIES |
| 35 | ||
| 2786.0 | Altech Corporation | FERRULE 2/0 AWG HI 70.0/20 0.79 IN. 1.46 IN. 0.79 IN. L X 0.53 IN. DIA. |
| 30 | ||
| 1786022 (ICV 2 5/10-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 10 POSITION COMBICON ICV SERIES |
| 30 | ||
| 84137860 (NULL) | Crydom Inc | RELAY, SSR, CONTROL, 15A, CTRL-V 3-32DC, VOL-RTG 1-100DC, UL/CUL, CE, TUV |
| 15 | ||
| 1786048 (ICV 2 5/12-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 12 POSITION COMBICON ICV SERIES |
| 12 | ||
| 1SNA167860R0100 (016786001) | TE Connectivity | TEST PLUG, FC4, 4MM, SNA SERIES |
| 10 | ||
| MMB60-12GH50-E2-V1 (278605) | PEPPERL+FUCHS GmbH | MAGNETIC PROXIMITY SENSOR, M12X1, 60MM RANGE, 10-30VDC, PNP-NO, MMB60 SERIES |
| 3 | ||
| 2297860 | RS Pro | AC/DC DESKTOP POWER SUPPLY, UNIVERSAL INPUT, 12V DC, C14 PLUG TYPE, 4.9FT (1.5M) |
| 1 | ||
| 65404 (3227860) | Brady Worldwide Inc | CLEAT FOR USE WITH 120/277V BREAKER LOCKOUT |
| 1 | ||
| K50APFF100GRYC3QPMA (78607) | Banner Engineering Corp | PICK-TO-LIGHT OPTICAL TOUCH BUTTON, 50MM, 12-30VDC, PNP, GRN/RED/YEL, K50 SERIES |
| 1 | ||
| 7860 | Pass & Seymour | NEMA 3R ENCLOSURE |
| 0 | ||
![]() Microchip Technology Inc | UZ7860 | Microchip Technology Inc | Voltage Regulator _ Mini-Stud, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
![]() Bisco Industries | 5712-178-60 | Seastrom Mfg | 100 | |||
| 12578605-050275 | HEX HEAD CAP SCREWS | 72 | ||||
| 12578609-038275 | SOCKET SCREWS | 42 | ||||
| 1627860000 | Weidmüller Interface GmbH & Co. KG | RoHS : Compliant | 23 | |||
| NAS1786-08-18 | NAS Miscellaneous | 13 | ||||
| NAS1786-06-36 | NAS Miscellaneous | 5 | ||||
| MS24678-60U | MS SOCKET CAP SCREWS | 3 | ||||
| 1127-86-0516 | Staffall | 3 | ||||
![]() Onlinecomponents.com | HE.7860 | Greenlee Textron Inc | O-Ring | Greenlee HE.7860 RoHS : Compliant |
| 0 | |
| GLHB.7860 | Greenlee Textron Inc | GREENLEE GLHB.7860 Cylinder Seal Kit (Ls50L2), Hole Making RoHS : Compliant |
| 0 | ||
| 7860-BSS | Marinco Electrical Group | RoHS : Compliant |
| 0 | ||
| 7860-0000PR | 3M Interconnect | Conn DIP Hdr Idc 60P Vert RoHS : Compliant |
| 0 | ||
| 10-7860-10 | Aries Electronics Inc | RoHS : Compliant |
| 0 | ||
| 11-31-7860 | Molex | AM60506A135 TERMINATE & CUTOFF BLADE RoHS : Compliant |
| 0 | ||
| 11-32-7860 | Molex | NEST RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | PMB7860V1.1E-GICM | Infineon Technologies AG | LF2BGA-201-1 |
| 15,000 | |
TPS78601KTTR![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.2V 1.5A TO-263-6 T/R RoHS : Compliant |
| 564 | ||
TPS78601KTTT![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.2V Min, 5.5V Max, BICMOS, PSSO5 RoHS : Compliant |
| 71 | ||
TPS78601DCQ![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.2V 1.5A SOT-223-6 Tube RoHS : Compliant |
| 3 | ||
![]() Sager | 78601/3JC | Murata Power Solutions | Pulse Transformers SM TRANSFORMER RoHS : Compliant |
| 340 | |
| EM6786-000 | TE Connectivity | Circular MIL Spec Backshells TXR54AB90-2410BI2J |
| 0 | ||
| 0786022600 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding NOSG,STR,SnB,PSA,CTL | 0 | |||
| AAC7786-00 | TE Connectivity | TE Connectivity P83723/60-14-4-J-LC4-14 | 0 | |||
| 78604/2MC-R | Murata Power Solutions | Pulse Transformers PLEASE SEE MURATA'S SUGGESTED ALTERNATE 78604/2JC-R RoHS : Compliant | 0 | |||
| EK4786-000 | TE Connectivity | TE Connectivity 70H1-19-12-1-C RoHS : Compliant | 0 | |||
| 10205786-00 | TE Connectivity | PT9CN-200SSN3426FR-J25060NC5 | 0 | |||
| 0011327860 | Molex | Other Tools NEST |
| 0 | ||
| 78601/2MC-R | Murata Power Solutions | Pulse Transformers PLEASE SEE MURATA'S SUGGESTED ALTERNATE 78601/2JC-R RoHS : Compliant | 0 | |||
| 78602/4JC-R | Murata Power Solutions | Pulse Transformers RoHS : Compliant | 0 | |||
| 78604/16MC | Murata Power Solutions | Pulse Transformers PLEASE SEE MURATA'S SUGGESTED ALTERNATE 78604/16JC RoHS : Compliant | 0 | |||
| AAE8786-00 | TE Connectivity | TE Connectivity 95LC1-14-07-1-B-CV4024 | 0 | |||
| 78604/8C | Murata Power Solutions | Pulse Transformers TRANSFORMER 2:1 1000UH 15VUS | 0 | |||
| AAA2786-00 | TE Connectivity | TE Connectivity 100P237-13-1-ZB-R6-02 RoHS : Compliant | 0 | |||
| 1-1478606-2 | TE Connectivity | Basic / Snap Action Switches MP16DTCSLE MICRO SWITCH, SHORT | 0 | |||
![]() Ameya Holding Limited | TPS78601DCQR![]() | Texas Instruments | RoHS : Compliant | 2,519 | ||
TPS78601DCQ![]() | Texas Instruments | RoHS : Compliant | 66 | |||
![]() ComSIT USA | P51678602 | IPS LANDO | AVAILABLE EU | 749 | ||
![]() ComSIT USA | RL1786013C | Sumida Corporation | Electronic Component RoHS : Compliant | 13,700 | ||
| PMB7860V11EGICM | Infineon Technologies AG | RF/Microwave Device RoHS : Compliant | 13,500 | |||
| ISL78600ANZTR5573 | Intersil Corporation | Multi-Cell Li-Ion Battery Manager Power Supply Management Circuit, Fixed, 12 Channel, PQFP64 RoHS : Compliant | 3,708 | |||
| HM7860470LFTR | bi technologies | General Purpose Inductor, 47uH, 20%, 1 Element, SMD, 4949 RoHS : Compliant | 500 | |||
| 7447786004 | Adolf Wuerth Gmbh & Co Kg | SMD SHIELDED POWER INDUCTOR General Purpose Inductor RoHS : Compliant | 354 | |||
| HCPL7860000E | Avago Technologies | OPTICALLY ISOLATED SIGMA-DELTA (S-D) MODULATOR ADC, Delta-Sigma, 15-Bit, 1 Func, 1 Channel, Serial Access, PDIP8 RoHS : Compliant | 300 | |||
| MAX17860ACBV+TCTK | Maxim Integrated Products | Multi-Cell Li-Ion Battery Pack Monitor, I�C interface, QFN-32, for battery management and protection applications RoHS : Compliant | 141 | |||
| 1786022V0 | Phoenix Contact | HEADER Barrier Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 50 | |||
| 786029C | Murata Manufacturing Co Ltd | GENERAL PURPOSE PULSE TRANSFORMER Pulse Transformer, GENERAL PURPOSE Application(s), 1:1:1 RoHS : Compliant | 42 | |||
| HCPL7860K | Agilent Technologies Inc | OPTICALLY ISOLATED SIGMA-DELTA (S-D) MODULATOR ADC, Delta-Sigma, 15-Bit, 1 Func, 1 Channel, Serial Access, PDIP8 RoHS : Not Compliant | 23 | |||
![]() Interstate Connecting Components | EM6786-000 | TE Connectivity | TXR54AB90-2410BI2J | 0 | ||
| 000L67860 | ITT Interconnect Solutions | FRCIRG06R20-27S-F80T240 -VO-AM25-1.5F-MOD | 0 | |||
| 10205786-00 | TE Connectivity | PT9CN-200SSN3426FR-J25060NC5 | 0 | |||
| 874786-000 | TE Connectivity | XCSM-55/18-1000/S(S10) RoHS : Compliant | 0 | |||
| 2377860-1 | TE Connectivity | 11POS,HYBRID,REC HSG ASSY,UNSL RoHS : Compliant | 0 | |||
| CX6786-011 | TE Connectivity | MVTI-6141-ML-5-17 | 0 | |||
| 2278600-3 | TE Connectivity | 52POS., MIXED REC. HSG+LEVER, RoHS : Compliant |
| 0 | ||
| 1-1617786-0 | TE Connectivity | FCA-410-1627L=M83536/16-027L RoHS : Not Compliant |
| 0 | ||
| C93-834786-09P | Amphenol Industrial Operations | WALL MOUNT RECEPTACLE ASSEMBLY BLACK ZINC PLATED NON PRE-TINN | 0 | |||
| 10209786-00 | TE Connectivity | RT8101-0001-121-2130 | 0 | |||
| CZ5786-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A0121-16-9/96CS2275- | 0 | |||
| C93-834786-01P | Amphenol Industrial Operations | WALL MOUNT RECEPTACLE ASSEMBLY BLACK ZINC PLATED NON PRE-TINN | 0 | |||
| 927860-2 | TE Connectivity | KONTAKTBUCHSE RoHS : Compliant |
| 0 | ||
| 687-860M3 | Glenair Inc | MICRO-D HARDWARE | 0 | |||
| CH20786001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCHFT5000-30/15-0-540MM RoHS : Compliant | 0 | |||
![]() PEI Genesis | 000L67860 | ITT Interconnect Solutions |
| 7 | ||
| 002786-0003 | ITT Interconnect Solutions |
| 0 | |||
| 002786-0000 | ITT Interconnect Solutions |
| 0 | |||
| 357-8786-000 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 1-1478601-2 | TE Connectivity | Connectors |
| 339 | |
| AAD4786-00 | TE Connectivity | Connectors |
| 330 | ||
| 5786073-1 | TE Connectivity | Connectors RoHS : Compliant |
| 238 | ||
| TW-06-12-T-D-786-085 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 148 | ||
| 178602-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 44 | ||
| 817860-SF | TE Connectivity | TE COMPONENT 817860-SF |
| 40 | ||
| 1-5499786-0 | TE Connectivity | TE COMPONENT (REF 1-5499786-0) |
| 24 | ||
| 000L67860 | VEAM | FRCIRG06R2027SF80T240VOAM2515F |
| 5 | ||
| M1000-078-6020 | Amphenol Corporation | Connector |
| 4 | ||
| AAE3786-00 | TE Connectivity | Unspecified Connectors |
| 3 | ||
| 8786000 | Hartmann Electronic | AERO RELAY/CONTACTOR 8786000 |
| 3 | ||
| 5-1617786-0 | TE Connectivity | Relays RoHS : Not Compliant |
| 3 | ||
| 020317860000-M | TE Connectivity | SENSOR 020317860000-M |
| 1 | ||
| 34786001 | Hartmann Electronic | AERO RELAY/CONTACTOR 34786001 |
| 1 | ||
![]() Rutronik | SP000786096 | Infineon Technologies AG | THYR Modul 2600V 360A 48mm RoHS : Compliant |
| 5 | |
![]() Chip 1 Exchange | 744 786 047A | Wurth Elektronik | INSTOCK | 9,362 | ||
| 744786039A | INSTOCK | 3,782 | ||||
| 744786033A | INSTOCK | 3,750 | ||||
| 744786011 | INSTOCK | 3,065 | ||||
| 74478606 | INSTOCK | 3,062 | ||||
| 7447786006- | Wurth Elektronik | INSTOCK | 816 | |||
| TPS78601KTTT | INSTOCK | 813 | ||||
| C7860A1-0008 | INSTOCK | 770 | ||||
| RY78600 | INSTOCK | 457 | ||||
| 10537860 | INSTOCK | 90 | ||||
| 1786019 50PCS/VPE | Phoenix Contact | INSTOCK | 30 | |||
| G7860-SD48-G | INSTOCK | 10 | ||||
| G7860A-S-16TE1-FAN-G | INSTOCK | 5 | ||||
![]() Avnet Abacus | 0097078602 | Qnity Laird | Gasket for IEEE 1394 Horizontal Connectors (Alt: 0097078602) RoHS : Compliant | 3,000 | ||
| 78601/1JC | Murata Manufacturing Co Ltd | (Alt: 78601/1JC) RoHS : Compliant | 1,500 | |||
| 78601/2C | Murata Manufacturing Co Ltd | (Alt: 78601/2C) RoHS : Compliant | 300 | |||
| 78604/8C | Murata Manufacturing Co Ltd | (Alt: 78604/8C) RoHS : Compliant | 0 | |||
| 687860004 | Molex | (Alt: 687860004) RoHS : Compliant | 0 | |||
| 78601/3JC | Murata Manufacturing Co Ltd | (Alt: 78601/3JC) RoHS : Compliant | 0 | |||
| 5786073-1 | TE Connectivity | Conn DSubminiature SKT 26 POS 229mm Solder ST ThruHole 26 Terminal 1 Port Tray (Alt: 5786073-1) RoHS : Compliant | 0 | |||
| 2377860-1 | TE Connectivity | (Alt: 2377860-1) RoHS : Compliant | 0 | |||
| 78602/8JC | Murata Manufacturing Co Ltd | (Alt: 78602/8JC) RoHS : Compliant | 0 | |||
| 78604/16MC | Murata Manufacturing Co Ltd | (Alt: 78604/16MC) RoHS : Compliant | 0 | |||
| M20-7860942 | Harwin | 254mm 01 Pitch SIL SMT Dual Entry Socket Assembly selective gold tin 9 contacts (Alt: M20-7860942) RoHS : Compliant | 0 | |||
| 78604/2MC-R | Murata Manufacturing Co Ltd | Pulse Transformer 21 1000Vrms 034Ohm Prim DCR 13pF 10Vus Surface Mount (Alt: 78604/2MC-R) RoHS : Compliant | 0 | |||
| 78601/2MC-R | Murata Manufacturing Co Ltd | Pulse Transformer 11 1000Vrms 034Ohm Prim DCR 22pF 10Vus Surface Mount (Alt: 78601/2MC-R) RoHS : Compliant | 0 | |||
| 78602/4JC-R | Murata Manufacturing Co Ltd | (Alt: 78602/4JC-R) RoHS : Compliant | 0 | |||
| M20-7860642 | Harwin | 254mm 01 Pitch SIL SMT Dual Entry Socket Assembly selective gold tin 6 contacts (Alt: M20-7860642) RoHS : Compliant | 0 | |||
![]() Avnet Asia | KP78600021 | Amphenol Corporation | (Alt: KP78600021) RoHS : Compliant | 0 | ||
| 78604/4C | Murata Manufacturing Co Ltd | (Alt: 78604/4C) RoHS : Compliant | 0 | |||
| 0786027000 | Qnity Laird | SPRING GROUND (Alt: 0786027000) RoHS : Compliant | 0 | |||
![]() Avnet Silica | DTR0009987860 (ALS) | Sanmina Corporation | (Alt: DTR0009987860) RoHS : Not Compliant | 0 | ||
![]() Component Electronics, Inc | 786096-7 | TE Connectivity | IN STOCK SHIP TODAY |
| 924 | |
| 278-6.04K | IN STOCK SHIP TODAY |
| 200 | |||
| LA7860 | IN STOCK SHIP TODAY | 100 | ||||
| 1557860000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 64 | ||
| MA3X78600L | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 20 | ||
| 786090-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 13 | ||
| 1527860000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| 1057860-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 4 | |||
![]() DB Roberts | ADPS37-8-60 | Sugatsune Kogyo Co Ltd | SS GLIDE | 0 | ||
![]() EBV Elektronik | HCPL-7860-300E | Broadcom Limited | OptoCoupler 8Pin PDIP SMD Tube (Alt: HCPL-7860-300E) RoHS : Compliant | 0 | ||
| HCPL-7860-000E | Broadcom Limited | OptoCoupler 8Pin PDIP Tube (Alt: HCPL-7860-000E) RoHS : Compliant | 0 | |||
| HCPL-7860-500E | Broadcom Limited | OptoCoupler 8Pin PDIP SMD TR (Alt: HCPL-7860-500E) RoHS : Compliant | 0 | |||
| BX80605I7860 S LBJJ | Intel Corporation | (Alt: 903876) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 02645978-601 | Connector Technology Inc | Cable Assembly | 263 | ||
| 02645978-601 REV A | Cable Assembly | Cable Assembly | 263 | |||
| 01645978-601 REV E | Cable Assembly | Cable Assembly | 76 | |||
| 200878-60 | AbelConn LLC | Connector MIL M | 4 | |||
| M1000-078-6020 | Amphenol Aerospace | Connector 83723 | 4 | |||
| RT78602 | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| 37786010 | TE Connectivity | Relays | 0 | |||
| RT78601 | TE Connectivity | Relays RoHS : Compliant | 0 | |||
![]() Flip Electronics | HCPL-7860-300E | Broadcom Limited | Stock, Ship Today RoHS : Compliant |
| 1,280 | |
![]() Maritex | TPS78601KTTR![]() | Texas Instruments | LDO Regulators; TPS78601KTTR; TEXAS INSTRUMENTS; 5; 1; 1.5 A; 5.5 V RoHS : Compliant |
| 87 | |
| 178602-1 | TE Connectivity | Rectangular Connector Housings; 178602-1; TE CONNECTIVITY; 1; 2; 2; Yes RoHS : Compliant |
| 32 | ||
TPS78601DRBR![]() | Texas Instruments | LDO Regulators; TPS78601DRBR; TEXAS INSTRUMENTS; 8; 1; 1.5 A; 5.5 V RoHS : Compliant |
| 2 | ||
![]() Master Electronics | 78600-101 | Visual Communications Company | RoHS : Compliant |
| 70 | |
| 5786-0 | Pomona Electronics | RoHS : Compliant |
| 9 | ||
| EM6786-000 | TE Connectivity | TXR54AB90-2410BI2J MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 042786-0117 | ITT Interconnect Solutions | PV0G22B41PND16 / 042786-0117 / Circular RoHS : Compliant |
| 0 | ||
| AAC7786-00 | TE Connectivity | P83723/60-14-4-J-LC4-14 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 000777860 | ITT Interconnect Solutions | Backshell includes wire sealing grommet and compression ring RoHS : Not Compliant |
| 0 | ||
| 020317860000-M | TE Connectivity | SI-750-6000 RoHS : Compliant |
| 0 | ||
| 10205786-00 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 5786073-1 | TE Connectivity | Conn D-Subminiature SKT 26 POS 2.29mm Solder ST Thru-Hole 26 Terminal 1 Port Tray RoHS : Compliant |
| 0 | ||
| 88947-8600 | Molex | Harness Assymx Deutschland/Keb |Molex 88947-8600 RoHS : Compliant |
| 0 | ||
| FFSD-05-D-17.86-01-N-D04 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 067860-0010 | ITT Interconnect Solutions | PV74W22-41S; Pv/cv/kpd; Circular RoHS : Not Compliant |
| 0 | ||
| 2377860-1 | TE Connectivity | 11POS HYBRID REC HSG ASSY UNSLD COD A MOQ Reduction RoHS : Compliant |
| 0 | ||
| 000737860 | ITT Interconnect Solutions | Circular Connector - Receptacle - Female Sockets - 38 Position - Shell Size-Insert 40A-38 - Bayonet Lock - Orientation W -Crimp Contacts -Panel Mount. RoHS : Compliant |
| 0 | ||
| 2278600-3 | TE Connectivity | 52POS. MIXED REC. HSG+LEVER ASS'Y MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1017860000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks BLF 5.00HC/02/180 SN OR BX RoHS : Compliant |
| 50 | |
1787860000![]() | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 24B TOLU 1M25G RoHS : Compliant |
| 50 | ||
| 1786064 | Phoenix Contact | Pluggable Terminal Blocks 14 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 50 | ||
| 1-2378606-1 | TE Connectivity | Automotive Connectors 6POS,NEXTGEN, MCON 1.2 LL REC,SLD,COD A RoHS : Compliant |
| 50 | ||
| 1057860000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WQV 4/5 RoHS : Compliant |
| 50 | ||
| 1786051 | Phoenix Contact | Pluggable Terminal Blocks 13 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 32 | ||
| 2947860 | Phoenix Contact | Enclosures for Industrial Automation EMG 30-LG RoHS : Compliant |
| 4 | ||
| 407860 | Extech by FLIR | Environmental Test Equipment Vibration Mtr/HD W/Displacement Function |
| 2 | ||
| 1277860000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks B2CF 3.50/04/180F SN BK BX RoHS : Compliant |
| 1 | ||
| 1607860 | Phoenix Contact | CIRCULAR METAL CONNECTOR, PANEL MOUNT, PIN, STANDARD ROTATION (17 POSITION) RoHS : Compliant |
| 1 | ||
| 84137860 | Crydom Inc | Relay; SSR; Control; Cur-Rtg 15A; Ctrl-V 3-32DC; Vol-Rtg 1-100DC; UL/cUL; CE; TUV |
| 0 | ||
| 2478600000 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers MCB 489 1P D 4A ACDC |
| 0 | ||
| 4X71B67860-AX | Axiom Manufacturing | 16GB DDR4-3200 RDIMM LENOVO 4X71B67860 |
| 0 | ||
| H3978-60001-AX | Axiom Manufacturing | Axiom Maintenance Kit |
| 0 | ||
| 1727860000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks S2L 3.50/12/90G 3.5SN OR BX RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03478-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly SMA male to TNC male low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 60 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W03478-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W03478-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03478-60 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 60 inch length using LMR-400-UF coax. |
| 639 | |
| PE3C9378-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Outdoor Rated 4.3-10 Male to NEX10 Male Low PIM Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly outdoor rated 4.3-10 male to NEX10 male low PIM cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated 4.3-10 male to NEX10 male low PIM cable 60 inch length using SPO-250 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM 4.3-10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C9378-60 can also be known as a low PIM 4.3-10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C9378-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. Our 4.3-10 male to NEX10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to NEX10 plug cable assembly PE3C9378-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to NEX10 cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C9378-60 can also be used in the other direction and will be a NEX10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to NEX10 cable assembly for quick shipment worldwide. Variations of 4.3-10 and NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 161 | ||
| PE3C10278-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to BNC male low loss cable 60 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to BNC male low loss cable 60 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10278-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10278-60 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 40 | ||
| PE3MSA00478-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. LF 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Non-Insulated BLKHD Jack for PE-30-02003 60" Cable., Radio frequency assembly LF 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp non-insulated BLKHD jack for PE-30-02003 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LF 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp non-insulated BLKHD jack for PE-30-02003 60" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00478-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00478-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00478-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LF 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp non-insulated BLKHD jack for PE-30-02003 60" cable. |
| 5 | ||
| PE3C9778-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG303HV, RF Cable Type: RG303HV, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 10KV Female Bulkhead to MHV Male Right Angle Cable 60 Inch Length Using RG303HV Coax., Radio frequency assembly 10KV female bulkhead to MHV male right angle cable 60 inch length using RG303HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV female bulkhead to MHV male right angle cable 60 inch length using RG303HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10KV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10KV bulkhead cable connection on one end and right angle MHV cable connection on the other. Our 10KV to right angle MHV cable assembly has female gender on end 1 and male on end 2. PE3C9778-60 can also be known as a 10KV jack to right angle MHV plug cable assembly and will be shipped same-day as it is purchased. 10KV jack to MHV plug cable assembly PE3C9778-60 is built with RG303HV which is a coax type. The Pasternack 10KV cable assembly is manufactured with 10KV to right angle MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10KV female bulkhead to MHV right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9778-60 can also be used in the other direction and will be right angle MHV male to 10KV female bulkhead cable assembly if the opposite connectivity is required. 10KV jack bulkhead to MHV right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10KV to MHV cable assembly for quick shipment worldwide. Variations of 10KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10KV female bulkhead to MHV male right angle cable 60 inch length using RG303HV coax. |
| 3 | ||
| PE38278-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to QMA Male Cable 60 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA female to QMA male cable 60 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to QMA male cable 60 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and QMA cable connection on the other. Our low loss SMA to QMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to QMA cable is a female to male coax assembly, PE38278-60, can also be known as a low loss SMA jack to QMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to QMA plug cable assembly PE38278-60 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA female to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38278-60 can also be used in the other direction and will be QMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to QMA male cable 60 inch length using PE-C195 coax. |
| 0 | ||
| PE3C7860-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.2-5 Male Right Angle to 2.2-5 Male Right Angle Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and right angle 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to right angle 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7860-48, can also be known as a low PIM right angle 2.2-5 plug to right angle 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7860-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to right angle 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 right angle plug to 2.2-5 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 48 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W17860-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male Right Angle to NEX10 Female Bulkhead Low PIM Cable 24 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female bulkhead low PIM cable 24 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female bulkhead low PIM cable 24 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17860-24 can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17860-24 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17860-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17860-24 can also be used in the other direction and will be NEX10 female bulkhead to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7860-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 24 inches. 2.2-5 Male Right Angle to 2.2-5 Male Right Angle Low PIM Cable 24 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 24 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 24 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and right angle 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to right angle 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7860-24, can also be known as a low PIM right angle 2.2-5 plug to right angle 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7860-24 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to right angle 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 right angle plug to 2.2-5 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 24 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C7860 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. 2.2-5 Male Right Angle to 2.2-5 Male Right Angle Low PIM Cable Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 male right angle low PIM cable using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 male right angle low PIM cable using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and right angle 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to right angle 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7860, can also be known as a low PIM right angle 2.2-5 plug to right angle 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7860 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to right angle 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 right angle plug to 2.2-5 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 male right angle low PIM cable using 1/4 inch superflexible coax. | 0 | |||
| PE3C7860-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.2-5 Male Right Angle to 2.2-5 Male Right Angle Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and right angle 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to right angle 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7860-100CM, can also be known as a low PIM right angle 2.2-5 plug to right angle 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7860-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to right angle 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 right angle plug to 2.2-5 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C3178-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using RG316-DS Coax., Radio frequency assembly N male to N male right angle cable using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C3178-60, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C3178-60 is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3178-60 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable using RG316-DS coax. |
| 0 | ||
| PE3MSA00578-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRB Plug to TRB Jack Bulkhead 1553 Cable 60 Inch Length Using 78 Ohm TWCH-78-2 Coax., Radio frequency assembly TRB plug to TRB jack bulkhead 1553 cable 60 inch length using 78 Ohm TWCH-78-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB plug to TRB jack bulkhead 1553 cable 60 inch length using 78 Ohm TWCH-78-2 coax, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00578-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00578-60 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00578-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB plug to TRB jack bulkhead 1553 cable 60 inch length using 78 Ohm TWCH-78-2 coax. |
| 0 | ||
| PE3C10378-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10378-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10378-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. TNC plug to TNC plug cable assembly PE3C10378-60 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17860 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male Right Angle to NEX10 Female Bulkhead Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female bulkhead low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female bulkhead low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17860 can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17860 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17860 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17860 can also be used in the other direction and will be NEX10 female bulkhead to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
![]() TE Connectivity | 2278600-3 | TE Connectivity | 52POS., MIXED REC. HSG+LEVER, ASS'Y Nominal Voltage Architecture: 12 V Number of Positions: 52 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 2.8 mm 6.3 mm Ampseal Header | 12 V 52 Housing for Female Terminals Wire-to-Wire | 2.8 mm | TE Connectivity RoHS : Compliant |
| 253 | |
| 1-5499786-0 | TE Connectivity | A/L UNIV HDR 50P RA LAT Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 50 2.54 mm .1" | Ampseal Header | TE Connectivity RoHS : Compliant |
| 161 | ||
| 4828-007-8605 | TE Connectivity | BKSHL, 86P, BLK, VERTICAL, DRCP Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover Primary Product Material: Nylon 6/6 Black Cover Nylon 6/6 | TE Connectivity RoHS : Compliant |
| 134 | ||
| PT78603 | TE Connectivity | PT78603 Relay Socket Type: Printed Circuit Board Product Mount Type: Board Mount Pole Configuration: 3 Relay Accessory Type: Socket Printed Circuit Board Board Mount 3 Socket | TE Connectivity RoHS : Compliant |
| 124 | ||
![]() Teledyne HiRel | 5962-8778601VA![]() | Teledyne HiRel | A/D CONVERTER, 6-BIT FLASH RoHS : Not Compliant | 0 | ||
![]() Vyrian | 1786080 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,100 | ||
| LTC7860EMSE-TRPBF | Analog Devices Inc | 3,000 | ||||
| LTC7860EMSE-PBF | Analog Devices Inc | 3,000 | ||||
| 1837860000 | Weidmueller & Kg | 2,700 | ||||
| 1786077 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 2,250 | |||
| MAX77860EWG+T | Analog Devices Inc | Power Supply Management Circuit, Adjustable, 1 Channel, +2.5V, PBGA81 RoHS : Compliant | 2,200 | |||
| 5961-01-047-8604 | Texas Instruments | Optoelectronic Device RoHS : Not Compliant | 2,050 | |||
TPS78601KTTTG3![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.22V Min, 5.2V Max, BICMOS, PSSO5 RoHS : Compliant | 1,850 | |||
| 1786035 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 1,750 | |||
| OP27EPTLG786034 | Analog Devices Inc | 1,450 | ||||
| 78.60.1.230.2403 | Finder | AC-DC Regulated Power Supply Module | 1,350 | |||
| 687860002 | Molex | Interconnection Device RoHS : Compliant | 1,050 | |||
| 744786033 | Wurth Elektronik | General Purpose Inductor, 0.0039uH, 7.693%, 1 Element, Ceramic-Core, SMD, 0603 | 580 | |||
| HCPL-7860 | Broadcom Limited | ADC, Delta-Sigma, 15-Bit, 1 Func, 1 Channel, Serial Access, PDIP8 RoHS : Not Compliant | 220 | |||
| FJ8071504786006S RLD0 | Intel Corporation | 99 | ||||
![]() Win Source Electronics | SI7860DP-T1-E3 | Vishay Huntington | MOSFET N-CH 30V 11A PPAK SO-8 |
| 11,800 | |
TPS78601DCQ![]() | Texas Instruments | ULTRALOW-NOISE, HIGH PSRR, FAST RF 1.5 A LOW-DROPOUT LINEAR REGULATORS | IC REG LIN POS ADJ 1.5A SOT223-6 RoHS : Compliant |
| 10,850 | ||
| HCPL-7860#50Y | Broadcom Limited |
| 10,000 | |||
| HCPL-7860-500E | Broadcom Limited | OPTOCOUPLER MOD SIGM-DELTA 8-SMD RoHS : Compliant |
| 10,000 | ||
TPS78601DCQR![]() | Texas Instruments | IC REG LDO ADJ 1.5A SOT223-6 RoHS : Compliant |
| 9,570 | ||
TPS78601DCQRG4![]() | Texas Instruments | IC REG LDO ADJ 1.5A SOT223-6 RoHS : Compliant |
| 9,240 | ||
TPS78601DCQG4![]() | Texas Instruments | ULTRALOW-NOISE, HIGH-PSRR, FAST, RF, 1.5-A LOW-DROPOUT LINEAR REGULATORS RoHS : Compliant |
| 9,130 | ||
TPS78601KTT![]() | Texas Instruments | ULTRALOW-NOISE, HIGH PSRR, FAST RF 1.5 A LOW-DROPOUT LINEAR REGULATORS RoHS : Not Compliant |
| 3,827 | ||
TPS78601KTTR![]() | Texas Instruments | IC REG LDO ADJ 1.5A DDPAK RoHS : Compliant |
| 3,030 | ||
TPS78601KTTT![]() | Texas Instruments | IC REG LDO ADJ 1.5A DDPAK RoHS : Compliant |
| 3,030 | ||
TPS78601KTTTG3![]() | Texas Instruments | IC REG LDO ADJ 1.5A DDPAK / LDO Regulator Pos 1.2V to 5.5V 1.5A 6-Pin(5+Tab) TO-263 T/R RoHS : Compliant |
| 2,566 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |