| Electronic Components Datasheet Search |
|
7751 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 9-1617751-8 | TE Connectivity | FCA-210-CX3 RoHS : Compliant |
| 33 | |
| GST-00117751 | Carling Technologies | STL15458 RoHS : Compliant |
| 0 | ||
| JW-07-04-T-S-775-150 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 035-72775-17 | Thomas & Betts | Insulated Watertight Strain Relief Connector - 1 Inch Straight - Cable Size 0.750 to 0.875 Inch - Steel - Zinc Plated. RoHS : Compliant |
| 0 | ||
| MIC3775-1.8YMM | Microchip Technology Inc | LDO Regulator Pos 1.8V 0.75A 8-Pin MSOP Tube RoHS : Compliant |
| 0 | ||
| TW-10-12-STL-D-775-175 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1-2203775-1 | TE Connectivity | 5POS MCON 1.2 CB REC 1p TL SEALED MOQ Reduction RoHS : Compliant |
| 0 | ||
| TW-10-12-S-D-775-100-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZW-40-20-G-D-775-177 | Samtec Inc | FLEXIBLE BOARD STACKING H RoHS : Compliant |
| 0 | ||
| 1-1418775-1 | TE Connectivity | 5POS MQS REC RoHS : Compliant |
| 0 | ||
| 1-1617751-4 | TE Connectivity | FCA-210-47 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 1-1623775-1 | TE Connectivity | MPC10 20K 5% MOQ Reduction RoHS : Compliant |
| 0 | ||
| HW-12-11-G-D-775-140 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1797751 | Phoenix Contact | CES-LTPULG-BK-32 RoHS : Compliant |
| 0 | ||
| 035-72775-1 | Thomas & Betts | Liquidtight Strain Relief Cord Connector - 1/2 Straight - Cord Range 0.125 to 0.250 - Zinc Die Cast. RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 1-1418775-1 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1-1418775-1) RoHS : Compliant |
| 30,000 | |
| 1-1734775-1 | TE Connectivity | - Trays (Alt: 1-1734775-1) RoHS : Compliant |
| 15,102 | ||
| 1877519-1 | TE Connectivity | - Bag (Alt: 1877519-1) RoHS : Compliant |
| 425 | ||
| 5106775-1 | TE Connectivity | Conn Hard Metric F 55 POS 2mm Press Fit ST Thru-Hole - Rail/Tube (Alt: 5106775-1) RoHS : Compliant |
| 350 | ||
| 2102775-1 | TE Connectivity | - Bag (Alt: 2102775-1) RoHS : Not Compliant |
| 300 | ||
| DF12.3877.5110.1 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: DF12.3877.5110.1) RoHS : Compliant |
| 162 | ||
| 10150775-113Y0LF | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 164 Contacts, Surface Mount, Straight, Solder - Bulk (Alt: 03AH3916) RoHS : Not Compliant |
| 0 | ||
| 7751 | 3M Interconnect | 7751 - Cable Rools/Shrink Tubing (Alt: 7000126058) RoHS : Not Compliant |
| 0 | ||
| R577513000 | Radiall | - Bulk (Alt: R577513000) RoHS : Not Compliant |
| 0 | ||
| MIC3775-1.8YMM | Microchip Technology Inc | - Rail/Tube (Alt: MIC3775-1.8YMM) RoHS : Compliant |
| 0 | ||
| MP7751GF-P | Monolithic Power Systems | Audio Amplifier Class-D 26V 5A 2x20W 28-Pin TSSOP T/R - Tape and Reel (Alt: MP7751GF-P) RoHS : Compliant |
| 0 | ||
| BFC237537751 | Vishay Intertechnologies | - Tape and Reel (Alt: BFC237537751) RoHS : Compliant |
| 0 | ||
| 10150775-113Y0LF | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 164 Contacts, Surface Mount, Straight, Solder - Trays (Alt: 10150775-113Y0LF) RoHS : Compliant |
| 0 | ||
| MIC3775-1.5YMM | Microchip Technology Inc | - Rail/Tube (Alt: MIC3775-1.5YMM) RoHS : Compliant |
| 0 | ||
| 225775-1120 | Molex | HFM RTK031 USL WD JCK TO USL WD JCK - Bulk (Alt: 2257751120) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 4078377511 | Fair-Rite Products Corp | Ferrite Cores & Accessories 78 Rod 9.5/70-78 |
| 69,235 | |
| 927775-1 | TE Connectivity | Automotive Connectors JR PWR TMR CONT RoHS : Compliant |
| 68,000 | ||
| 1-1418775-1 | TE Connectivity | Automotive Connectors 5 POSN. MQS REC HSG RoHS : Compliant |
| 9,786 | ||
| 2775113 | Phoenix Contact | Terminal Block Tools & Accessories D-UDK 4 RoHS : Compliant |
| 6,041 | ||
| 1-1734775-1 | TE Connectivity | USB Connectors USB REC TYPE A W/CAP R/A DIP AU 30U RoHS : Compliant |
| 1,823 | ||
| 1277510000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks B2CF 3.50/12/180 BK RoHS : Compliant |
| 1,666 | ||
| 2311775-1 | TE Connectivity | D-Sub High Density Connectors AMPL PLUG, HD22 R/A, 15P, S/L RoHS : Compliant |
| 1,360 | ||
| 83777-510-508 PPL-2AA Gray w/ Dark Gray | PacTec | Enclosures, Boxes, & Cases PPL-2AA Kit 4.35 x 2.74 x 1.11" Grey w/ Grey Sides RoHS : Compliant |
| 1,302 | ||
| 2775184 | Phoenix Contact | DIN Rail Terminal Blocks UDK 4-PE RoHS : Compliant |
| 1,038 | ||
| 2102775-1 | TE Connectivity | High Speed / Modular Connectors 8 columns left end differential (RTM) RoHS : Compliant |
| 160 | ||
| ECOC-9775-19.440-DN-TR | ECS International Inc | OCXO Oscillators 19.440 MHZ ECOC-9775 LVCMOS 3.3V +/-20ppb -40C - 85C 9.7 x 7.5 mm RoHS : Compliant |
| 33 | ||
| 225775-1722 | Molex | RF Cable Assemblies HFM Straight Jack-to-FAKRA Straight Jack Off-the-Shelf (OTS) Cable Assy., Key Z Water Blue, RTK031 Cable, 1000mm Lg., 50 Ohms RoHS : Compliant |
| 32 | ||
| 409775-1 | TE Connectivity | Crimpers / Crimping Tools HAND TOOL ASSY DOUBLE ACTION RoHS : Not Applicable |
| 7 | ||
| RST 4-RKMWV 4-377/3 M | Lumberg Automation | Sensor Cables / Actuator Cables |
| 0 | ||
| 775189-000 | TE Connectivity | Multi-Conductor Cables 55FB1511-22-7L-0 RoHS : Compliant |
| 0 | ||
![]() Newark | MAX77751FEFG+ | Analog Devices Inc | Battery Charger, Li-Ion/Pol, 85Deg C; |Analog Devices, Inc. MAX77751FEFG+ RoHS : Compliant |
| 815 | |
| 744775112 | Wurth Elektronik | Pd2 Inductor Type 7850, 12Uh, 2A; |Würth Elektronik 744775112 RoHS : Compliant |
| 494 | ||
| 744775112 | Wurth Elektronik | Pd2 Inductor Type 7850, 12Uh, 2A; |Würth Elektronik 744775112 RoHS : Compliant |
| 494 | ||
| 784775122 | Wurth Elektronik | Inductor, Aec-Q200, 22Uh, Unshld, 1.76A; |Würth Elektronik 784775122 RoHS : Compliant |
| 350 | ||
| PAKKL-5775-19 | Essentra Components | Cable Clamp, Nylon 6.6, Natural, 38.1Mm; Cable Clamp/Clip Type:Push Mount Cable Clamp; Internal Diameter:19.1Mm; Cable Clamp/Clip Material:Nylon 6.6 (Polyamide 6.6); Cable Clamp/Clip Colour:Natural; External Length:38.1Mm Rohs Compliant: Yes RoHS : Compliant |
| 282 | ||
| 10150775-113Y0LF | Amphenol Communications Solutions | Card Edge Conn, Dual Side, 164 Pos, Smd; Card Edge Connector Type:Dual Side; Card Thickness:1.57Mm; No. Of Contacts:164 Contacts; Connector Mounting:Surface Mount; Connector Body Orientation:Straight; Contact Termination Type:Solder Rohs Compliant: Yes RoHS : Compliant |
| 79 | ||
| 10150775-113Y0LF | Amphenol Communications Solutions | Card Edge Conn, Dual Side, 164 Pos, Smt; |Amphenol Communications Solutions 10150775-113Y0LF RoHS : Compliant |
| 60 | ||
| 2775184 | Phoenix Contact | Ground Modular Terminal Block, Udk 4-Pe; |Phoenix Contact 2775184 RoHS : Compliant |
| 42 | ||
| FMCA1775-100CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1775-100CM RoHS : Not Compliant |
| 29 | ||
| LCAT7751-3 | L-com Inc | Rf Attenuator, Bnc Plug-Jack, 3Db; |L-Com LCAT7751-3 RoHS : Compliant |
| 5 | ||
| LCAT7751-30 | L-com Inc | Rf Attenuator, Bnc Plug-Jack, 30Db; |L-Com LCAT7751-30 RoHS : Compliant |
| 5 | ||
| LCAT7751-2 | L-com Inc | Rf Attenuator, Bnc Plug-Jack, 2Db; |L-Com LCAT7751-2 RoHS : Compliant |
| 1 | ||
| FMAT7751-2 | Fairview Microwave Inc | Rf Attenuator, Bnc Plug-Bnc Jack, 2Db; |Fairview Microwave FMAT7751-2 RoHS : Not Compliant |
| 1 | ||
| 7751 | Keithley Instruments | Test Accessory; Available Until Stocks Are Exhausted |Keithley 7751 RoHS : Compliant |
| 0 | ||
| 7751 | Lumberg Automation | Rst 4-Rkmwv 4-377/3 M/ Yellow; |Lumberg Automation 7751 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX77751FEFG+ | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 8,991 | |
| MAX77751HEFG+ | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 7,702 | ||
| MAX77751JEFG+ | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 7,610 | ||
| MAX77511MEWB+ | Analog Devices Inc | High Efficiency, Low IQ Buck-B RoHS : Compliant | 0 | |||
| MAX77751GEFG+T | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77511AEWB+ | Analog Devices Inc | 4-Phase-Configurable Buck Regu RoHS : Compliant | 0 | |||
| MAX77511MEWB+T | Analog Devices Inc | High Efficiency, Low IQ Buck-B RoHS : Compliant |
| 0 | ||
| MAX77751CEFG+T | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77751DEFG+T | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77511AEWB+T | Analog Devices Inc | 4-Phase-Configurable Buck Regu RoHS : Compliant |
| 0 | ||
| MAX77751AEFG+T | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77751JEFG+T | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77751BEFG+T | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77751AEFG+ | Analog Devices Inc | 14V Input, 3A USB Type C Auton RoHS : Compliant |
| 0 | ||
| MAX77511REWB+ | Analog Devices Inc | High Efficiency, Low IQ Buck-B RoHS : Compliant | 0 | |||
![]() RS | 2775113 (D-UDK 4) | Phoenix Contact | END COVER TERM BLK GRAY 63.5 MM L 1.5 MM W |
| 613 | |
| 641775-1 | TE Connectivity | STRAIN RELIEF AND INSERT FOR USE WITH CAP HOUSING ADAPTERS 4 WAY RoHS : Compliant |
| 572 | ||
| 2775184 (UDK 4-PE) | Phoenix Contact | TERMINAL BLOCK GROUND SCREW 4 POS 0.2-2.5 SQ.MM 24-10AWG 6.2MM W GREEN-YELLOW |
| 207 | ||
| 17751 10 B1 | Volex Group | CORD, POWER, C13, RIGHT ANGLE, STRIPPEDEND, 3 COND SVT CBL, 67", 18 AWG |
| 127 | ||
| AP5724WG-7 (7513014P) | Diodes Incorporated | LED DRVR 6SEGMENT 3.3V/5V 6PIN SOT26 |
| 85 | ||
| 2775197 (D-UDK 4 BU) | Phoenix Contact | TERMINAL BLOCK FEED THROUGH END COVER BLUE |
| 35 | ||
| 1SNA205775R1600 (020577516) | TE Connectivity | BJS32 3 POLES JUMPER BAR, ENTRELEC |
| 5 | ||
| 1547751 | RS Pro | M12 4P, M,R/A, FREE END,5M, HYGIENIC F&B |
| 4 | ||
| 61-8775.11 | EAO AG | ACCESSORY, SWITCHING ELEMENT, E-STOPS,1NC+1NO, SLOW MAKE, SILVER,5A,250VAC/DC, SCREW RoHS : Compliant |
| 4 | ||
| FLUKE-1777 (5126630) | Fluke Calibration | THREE-PHASE POWER QUALITY ANALYZER, FLUKE 1770 SERIES |
| 4 | ||
| DMG1013UW-7 (7514070P) | Diodes Incorporated | P-CHANNEL ENHANCEMENT MODE MOSFET, LOW INPUT AND OUTPUT LEAKAGE |
| 1 | ||
| 7751 | Dichtomatik | O-RING, 400,00 8,00 80 NBR NB8050 |
| 0 | ||
| 7751 | 3M | TAPE, SAFETY-WALK LIGHT DUTY RESILIENT TREAD 7751, 1 IN X 60 IN, CLEAR BULK ROL |
| 0 | ||
| 7751005 | SAB Bröckskes | MULTICONDUCTOR CABLE,5C,10AWG,186X32,BC, PVC INS, BLACK PVC JKT, UL CSA AWM |
| 0 | ||
| 65X85X10SG (75017751) | Dichtomatik | OIL SEAL, 65MM ID, 85MM OD, 10MM WIDTH |
| 0 | ||
![]() Microchip Technology Inc | MIC2775-17YM5-TR | Microchip Technology Inc | Single Voltage Supervisor with Dual Active-High and Low Push-Pull Outputs, Manua, SOT-23, Projected EOL: 2036-03-10 RoHS : Compliant |
| 11,999 | |
MIC3775-1.5YMM-TR![]() | Microchip Technology Inc | 750mA Low Voltage uCap LDO, MSOP, Projected EOL: 2035-12-12 RoHS : Compliant |
| 2,500 | ||
| MIC3775-1.5YMM | Microchip Technology Inc | 750mA Low Voltage uCap LDO, MSOP, Projected EOL: 2035-12-09 RoHS : Compliant |
| 2,000 | ||
| MIC3775-1.8YMM | Microchip Technology Inc | 750mA Low Voltage uCap LDO, MSOP, Projected EOL: 2036-02-11 RoHS : Compliant |
| 0 | ||
| MIC3775-1.65YMM | Microchip Technology Inc | 750mA Low Voltage uCap LDO, MSOP, Projected EOL: 2041-10-18 RoHS : Compliant |
| 0 | ||
MIC3775-1.8YMM-TR![]() | Microchip Technology Inc | 750mA Low Voltage uCap LDO, MSOP, Projected EOL: 2036-03-11 RoHS : Compliant |
| 0 | ||
MIC3775-1.65YMM-TR![]() | Microchip Technology Inc | 750mA Low Voltage uCap LDO, MSOP, Projected EOL: 2041-10-18 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | MS28775-111 | MS O-RINGS | 3,044 | |||
| MS28775-114 | MS O-RINGS | 2,589 | ||||
| C5775.18.02 | General Cable Technologies Corporation | 1,000 | ||||
| MS28775-112 | MS O-RINGS | 335 | ||||
| MS28775-110 | MS O-RINGS | 254 | ||||
| MS28775-116 | MS O-RINGS | 234 | ||||
| NY-CC-775-1 | Southco | 186 | ||||
| MS28775-115 | MS O-RINGS | 150 | ||||
| S890-22-007-77-510000 | Mill-Max Mfg Corp | 145 | ||||
| MS28775-113 | MS O-RINGS | 48 | ||||
| MS28775-111 | Parco | 29 | ||||
| MS28775-112 | Parco | 13 | ||||
| M0775-10-SS-20 | RAF Electronic Hardware | 10 | ||||
| MS28775-110 | Parco | 9 | ||||
| PAKKL-5775-19 | Essentra Components | 3 | ||||
![]() Onlinecomponents.com | 7751 | 3M | 3M SAFETY WALK ROLLS AND RoHS : Compliant |
| 0 | |
| 7751 | Lumberg Automation | Sensor/Actuator Double-Ended Cordset: Male straight A-coded translucent 4-pin M12 Standard connector to female angled A-coded translucent 4-pin M8 Standard connector, 30 V AC/DC, 4 A; PUR yellow cable, 4-wires, 0.34 mmA² RoHS : Compliant |
| 0 | ||
| 62800-7751 | Molex | RoHS : Compliant |
| 0 | ||
| RFF-7751 | Pan Pacific | F-56, 1/4" RING F-CONNECTOR Pan Pacific Part Number: RFF-7751 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BLF6G27-75,112 | NXP Semiconductors | RF Power Field-Effect Transistor, 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 4 | |
| SAF7751HV/N208WK | NXP Semiconductors | Digital Signal Processor Audio, Car Signal Processor 176-QFP Tray RoHS : Compliant |
| 2,200 | ||
AD7751AAN![]() | Analog Devices Inc | Analog Circuit, 1 Func, CMOS, PDIP24 RoHS : Not Compliant |
| 7,871 | ||
| MAX77511MEWB+T | Analog Devices Inc | High Efficiency, Low IQ Buck-Boost Conve RoHS : Compliant |
| 12,000 | ||
AD7751AN![]() | Analog Devices Inc | Analog Circuit, 1 Func, CMOS, PDIP24 RoHS : Not Compliant |
| 2,608 | ||
TPS77515MPWPREP![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.5V 500mA 20-SOP T/R RoHS : Compliant |
| 208 | ||
TPS77516DR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.6V 500mA 8-SOIC T/R RoHS : Compliant |
| 2,742 | ||
TPS77518PWP![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 500mA 20-SOP Tube RoHS : Compliant |
| 6,477 | ||
| PT7751A | Texas Instruments | Switching Regulator, Voltage-mode, 15A, 400kHz Switching Freq-Max, Hybrid RoHS : Not Compliant |
| 2 | ||
| MAX77511AEWB+ | Maxim Integrated Products | IC VOLT REG 4 OUT 250mV - 5.2V 12A 64-BGA T/R RoHS : Compliant |
| 3,840 | ||
| MAX77751GEFG+T | Maxim Integrated Products | 14V Input, 3A USB Type C Autonomous Char RoHS : Compliant |
| 2,500 | ||
| MIC3775-1.5YMM | Micrel Inc | IC VOLT REG Fixed 1 REG 1.5V 750mA 8-SOP Tube RoHS : Compliant |
| 31,768 | ||
| MIC3775-1.8YMM | Micrel Inc | IC VOLT REG Fixed 1 REG 1.8V 750mA 8-SOP Tube RoHS : Compliant |
| 9,335 | ||
| D6417751RF200DDV | Renesas Electronics Corporation | Microcontroller 32-bit SuperH RISC ROMLess RoHS : Compliant |
| 2,413 | ||
HD6417751RBP200V![]() | Renesas Electronics Corporation | IC MCU SH-4 32Bit 1 Core ROMless 200MHz 256-BGA RoHS : Compliant |
| 6 | ||
![]() Sager | 035-72775-1 | ABB Group | Circular MIL Spec Tools, Hardware & Accessories |
| 25 | |
| 1-1840775-1 | Bel Fuse | Modular Connectors / Ethernet Connectors | 0 | |||
| 035-72775-17 | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| 2775184 | Phoenix Contact | DIN Rail Terminal Blocks UDK 4-PE RoHS : Compliant |
| 0 | ||
| 9-1617751-8 | TE Connectivity | General Purpose Relays FCA-210-CX3 RoHS : Not Compliant |
| 0 | ||
| 9-1617751-6 | TE Connectivity | General Purpose Relays FCA-210-CW4 RoHS : Not Compliant |
| 0 | ||
| 1052775-1 | TE Connectivity | RF Connectors / Coaxial Connectors 2052 3833 00 | 0 | |||
| A17751-08 | Qnity Laird | Thermal Interface Products Tflex HD92000 18x18 |
| 0 | ||
| 1-2203775-1 | TE Connectivity | Automotive Connectors 5POS, MCON 1.2 CB REC 1p TL SEALED RoHS : Compliant |
| 0 | ||
| 0395077511 | Molex | Pluggable Terminal Blocks 3.50MM EURO PLUG VERT ME RWE GRN AU 11CK | 0 | |||
| 0395177510 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME RWE GRN AU 10CK | 0 | |||
| ZW-40-20-G-D-775-177 | Samtec Inc | FLEXIBLE BOARD STACKING HEADER RoHS : Compliant |
| 0 | ||
| 1-1617751-4 | TE Connectivity | General Purpose Relays FCA-210-47 |
| 0 | ||
| 1797751 | Phoenix Contact | Phoenix Contact |
| 0 | ||
| A17751-06 | Qnity Laird | Thermal Interface Products Tflex HD91500 18x18 |
| 0 | ||
![]() TME | 172775-1 | TE Connectivity | Socket; straight; crimped; tinned; 22AWG÷18AWG; 1.5÷2.6mm RoHS : Compliant |
| 8,000 | |
| 4078377511 | Fair-Rite Products Corp | Core: ferrite; ROD; A: 9.5mm; C: 70mm; Permeability: 29; Øout: 9.5mm RoHS : Compliant |
| 2,538 | ||
| 47751-000LF | Amphenol Corporation | Connector: wire-board; socket; female; data; 1kV; 2.54mm; tinned |
| 2,000 | ||
| 4775173001 | TE Connectivity | 4775173001 |
| 335 | ||
| 15-47-7512 | Molex | Connector: wire-board; male; data; Inom: 2.5A; 250V; PIN: 12; 2.54mm RoHS : Compliant |
| 138 | ||
| 2775197 | Phoenix Contact | End piece; connectors; UDK; blue; polyamide; UDK4; 1.5mm RoHS : Compliant |
| 52 | ||
| 377515 | TE Connectivity | Anvil |
| 8 | ||
| 777510 | Pilz International | Automation module: safety relay; Usup: 24VDC; IN: 6; OUT: 5; IP40 |
| 0 | ||
| 0060100775100 | ALPS MAYKESTAG GmbH | Drill: for metal; Ø: 7.75mm; high speed steel; bulk,industrial |
| 0 | ||
| 1877510000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 19A RoHS : Compliant |
| 0 | ||
| 3007.751 | Halder Inc | Axe; 765mm; Application: for splitting; 2.84kg |
| 0 | ||
| 6577510 | Gedore Torque Ltd | Wrench: flat; single sided; 70mm; L: 560mm; Chrom-vanadium steel |
| 0 | ||
| 1877517 | Phoenix Contact | Connector: PCB terminal block; power supply; 12A; 400V; PIN: 5 RoHS : Compliant |
| 0 | ||
| 7789775100 | Weidmüller Interface GmbH & Co. KG | PAC RoHS : Compliant |
| 0 | ||
| 2382775-1 | TE Connectivity | Crimping tool: cable terminals |
| 0 | ||
![]() ComSIT USA | 3775199 | Grupo Gollet Electronics | AVAILABLE EU | 4,481 | ||
| 3775133 | ALPHPR | AVAILABLE EU | 2,279 | |||
| 3775191REVECO17661 | BILINK | AVAILABLE EU | 509 | |||
![]() ComSIT USA | SAF7751HVS31 | NXP Semiconductors | Electronic Component RoHS : Compliant | 9,642 | ||
BTS7751G![]() | Infineon Technologies AG | TRILITH IC Half Bridge Based Peripheral Driver, 4 Driver, 28A, PDSO28 RoHS : Not Compliant | 5,892 | |||
| HD6417751BP167I | Hitachi Ltd | SUPERH RISC ENGINE MICROPROCESSOR RISC Microprocessor, 32-Bit, 167MHz, CMOS, PBGA256 RoHS : Not Compliant | 4,403 | |||
| SAF7751HVN205Z | NXP Semiconductors | MULTI-TUNER CAR RADIO and AUDIO ONE-CHIP RoHS : Compliant | 4,073 | |||
BTM7751G![]() | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 4 Driver, 22A, MOS, PDSO28 RoHS : Compliant | 2,129 | |||
| 744775147 | Adolf Wuerth Gmbh & Co Kg | POWER INDUCTOR General Purpose Inductor, 47uH, 10%, 1 Element, Nickel-zinc-Core, SMD, 3128 RoHS : Compliant | 1,500 | |||
| SAF7751HVN205S31 | NXP Semiconductors | Electronic Component RoHS : Compliant | 500 | |||
| 744775115 | Adolf Wuerth Gmbh & Co Kg | WE-PD2 SMT POWER INDUCTOR General Purpose Inductor, 15uH, 10%, 1 Element, Ferrite-Core, SMD, 3128 RoHS : Compliant | 150 | |||
![]() Interstate Connecting Components | 68377-510-000 | PacTec | 68377-510-000,COMPLETE KIT 7.5X4.1X1.2 |
| 1 | |
| 87-577515-26P | Amphenol Aerospace | 38999 S2 CONN PLG | 0 | |||
| 87-577516-53E | Amphenol Aerospace | 38999 SII PLUG W/GRND FINGERS |
| 0 | ||
| 87-577516-53E | Amphenol Aerospace | 38999 S2 PLG CONN | 0 | |||
| 9-1617751-8 | TE Connectivity | FCA-210-CX3 RoHS : Not Compliant |
| 0 | ||
| 10150775-113Y0LF | Amphenol FCi | PCIE GEN4 SMT VERTICAL X16 WIT | 0 | |||
| 87-577513-08P | Amphenol Aerospace | 38999 SII PLUG 8#20 PIN | 0 | |||
| 87-577517-41E | Amphenol Aerospace | 38999 SII PLUG W/GRND FINGERS A=KEY,PIN, 43#20 |
| 0 | ||
| 9-1617751-6 | TE Connectivity | FCA-210-CW4 RoHS : Not Compliant |
| 0 | ||
| T3277518U | Amphenol Sine Systems | FEMALE RECEPTACLE SNAP-IN ASSE | 0 | |||
| 1-2321775-1 | TE Connectivity | 4P,MATE-AX,HDR ASSY REV.,90DE RoHS : Compliant | 0 | |||
| 1-2203775-1 | TE Connectivity | 5POS, MCON 1.2 CB REC 1P TL SE RoHS : Compliant |
| 0 | ||
| 177-513-008 | Glenair Inc | HERMETIC MICRO D | 0 | |||
| 1-1418775-1 | TE Connectivity | 5 POSN. MQS RECEPTACLE HOUSING RoHS : Compliant |
| 0 | ||
| 1-1617751-4 | TE Connectivity | FCA-210-47 |
| 0 | ||
![]() PEI Genesis | 87-577515-26P | Amphenol Corporation |
| 0 | ||
| 87-577518-32P | Amphenol Corporation |
| 0 | |||
| S1659-1775-12 | SOURIAU-SUNBANK |
| 0 | |||
| S2182G2775-1-34C | SOURIAU-SUNBANK |
| 0 | |||
| 55-2775-1 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| S3775-1 | SOURIAU-SUNBANK |
| 0 | |||
| S3775-12 | SOURIAU-SUNBANK |
| 0 | |||
| J1307-75-10 | SOURIAU-SUNBANK |
| 0 | |||
| 10-262775-15S | Amphenol Corporation |
| 0 | |||
| 10-642977-51S | Amphenol Corporation |
| 0 | |||
| 87-577514-18P | Amphenol Corporation |
| 0 | |||
| 87-577512-98P | Amphenol Corporation |
| 0 | |||
| S1659-1775-12S | SOURIAU-SUNBANK |
| 0 | |||
| S2182FM7775-1-34C | SOURIAU-SUNBANK |
| 0 | |||
| S3775-11 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 60775-1 | TE Connectivity | SPADE TERMINAL 18-14 AWG BR RoHS : Compliant |
| 102,960 | |
| ZW-03-20-L-D-775-129 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 1,255 | ||
| 10150775-113Y0LF | Amphenol FCi | Cable Assembly |
| 1,045 | ||
| 1-2177515-2 | TE Connectivity | Connectors RoHS : Compliant |
| 697 | ||
| 5106775-1 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 210 | ||
| TW-04-12-L-D-775-175 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 182 | ||
| 2213775-1 | TE Connectivity | TE COMPONENT (REF 2213775-1) RoHS : Compliant |
| 128 | ||
| TW-10-12-S-D-775-115 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 112 | ||
| 1820775-1 | TE Connectivity | Connectors |
| 66 | ||
| 54775-1 | TE Connectivity | Terminals RoHS : Compliant |
| 64 | ||
| TW-20-12-G-D-775-195 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 61 | ||
| ZW-24-20-S-T-775-130 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 48 | ||
| 9-1617751-6 | TE Connectivity | Relays RoHS : Not Compliant |
| 18 | ||
| 1057775-1 | TE Connectivity | Connectors RoHS : Compliant |
| 3 | ||
| 1-1617751-0 | TE Connectivity | Relays |
| 1 | ||
![]() Richardson RFPD | R577513000 | Radiall | RF Switch DPDT 0MHz to 3GHz 75dB RoHS : Not Compliant |
| 0 | |
| RP327-75-1000-S | Astrodyne TDI Power Supplies & EMI Filters | Bookshelf, 3-Phase Delta Dual Stage Power Line Fil RoHS : Compliant | 0 | |||
| F727751800 | Radiall | LC DUPLEX PC MULTIMODE ADAPTOR METALLIC ALIGNMENT RoHS : Compliant | 0 | |||
| 282127-75-10 | Amphenol Corporation | Conn 1.0/2.3 0Hz to 3GHz 75Ohm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 3017-7511-000 | Radiall | Conn SLB F 0Hz to 4GHz 50Ohm Solder ST Panel Mount RoHS : Not Compliant | 0 | |||
| R577513005 | Radiall | RF Switch DPDT 0MHz to 3GHz 75dB RoHS : Not Compliant |
| 0 | ||
| 3017-7511-600 | Radiall | RF Coax Pnl Mt Conn RoHS : Not Compliant | 0 | |||
| 1-1734775-1 | TE Connectivity | Conn USB 2.0 Type A RCP 4 POS Solder RA Thru-Hole RoHS : Compliant | 0 | |||
| CVCO55BE-1775-1845 | Crystek Corporation | Oscillator VCO 1775MHz to 1845MHz 5V 16-Pin SMD T/ RoHS : Compliant | 0 | |||
| R577513035 | Radiall | RF Switch 0MHz to 3GHz 75dB RoHS : Not Compliant |
| 0 | ||
| 935325577518 | NXP Semiconductors | SOC i.MX28 ARM926EJ-S 289-Pin MAP-BGA T/R RoHS : Compliant | 0 | |||
| SI5338B-B07751-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 409775-1 | TE Connectivity | Assembly Tools, Double Action Hand Tool Assembly RoHS : Compliant |
| 0 | ||
| SI5338B-B07751-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 3017-7511-700 | Radiall | RF Coax Pnl Mt Conn RoHS : Not Compliant | 0 | |||
![]() Chip 1 Exchange | 223886775108 | MEGAMOS Int | INSTOCK | 31,000 | ||
| 223886775159- | Philips Semiconductors | INSTOCK | 30,000 | |||
| 2238-867-75129 | Samsung Electro-Mechanics | INSTOCK | 5,500 | |||
| BTS7751G | INSTOCK | 1,105 | ||||
| 744775147 | Wurth Elektronik | INSTOCK RoHS : Compliant | 500 | |||
![]() Avnet Abacus | 2311775-1 | TE Connectivity | (Alt: 2311775-1) RoHS : Compliant | 990 | ||
| 4177514031 | TE Connectivity | (Alt: 4177514031) RoHS : Compliant | 800 | |||
| 1775115-1 | TE Connectivity | RCPT 64POS RA CENTRONICS (Alt: 1775115-1) RoHS : Compliant | 0 | |||
| 1052775-1 | TE Connectivity | (Alt: 1052775-1) RoHS : Compliant | 0 | |||
| 1393775-1 | TE Connectivity | Electromechanical Relay SPDT 1A 15VDC 15KOhm Through Hole (Alt: 1393775-1) RoHS : Compliant | 0 | |||
| 1393775-1 | TE Connectivity | Electromechanical Relay SPDT 1A 15VDC 15KOhm Through Hole (Alt: 1393775-1) RoHS : Compliant | 0 | |||
| 807751-000 | TE Connectivity | (Alt: 807751-000) RoHS : Compliant | 0 | |||
| 1775122001 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header M 14 POS 508mm Solder RA ThruHole Box (Alt: 1775122001) RoHS : Compliant | 0 | |||
| 1775143001 | Weidmüller Interface GmbH & Co. KG | WDM1775143001 (Alt: 1775143001) RoHS : Compliant | 0 | |||
| 1775102001 | Weidmüller Interface GmbH & Co. KG | (Alt: 1775102001) RoHS : Compliant | 0 | |||
| 9-1617751-8 | TE Connectivity | (Alt: 9-1617751-8) RoHS : Not Compliant | 0 | |||
| 9-1617751-6 | TE Connectivity | (Alt: 9-1617751-6) RoHS : Not Compliant | 0 | |||
| 1-1418775-1 | TE Connectivity | (Alt: 1-1418775-1) RoHS : Compliant | 0 | |||
| 1-1418775-1 | TE Connectivity | (Alt: 1-1418775-1) RoHS : Compliant | 0 | |||
| BFC237537751 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 2 Pin 750 pF 35 Through Hole 500 V 16 kV - Tape and Reel (Alt: BFC237537751) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10170775-170501 | Amphenol Corporation | (Alt: 10170775-170501) RoHS : Compliant | 0 | ||
| 10170775-170502 | Amphenol Corporation | (Alt: 10170775-170502) RoHS : Compliant | 0 | |||
| 54775-1 | TE Connectivity | (Alt: 54775-1) RoHS : Compliant | 0 | |||
| 2489775-1 | TE Connectivity | WHIP 60A STAR (Alt: 2489775-1) RoHS : Compliant | 0 | |||
| 2257751126 | Molex | (Alt: 2257751126) RoHS : Compliant | 0 | |||
| 10150775-113L0LF | Amphenol Corporation | FCI10150775-113L0LF PCIEX16,SMD G4 WITH (Alt: 10150775-113L0LF) RoHS : Compliant | 0 | |||
| 2257751124 | Molex | (Alt: 2257751124) RoHS : Compliant | 0 | |||
| 1-1734775-1 | TE Connectivity | (Alt: 1-1734775-1) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | MP7751GF-P | Monolithic Power Systems | (Alt: MP7751GF-P) RoHS : Compliant | 0 | ||
| MP7751GF-Z | Monolithic Power Systems | (Alt: MP7751GF-Z) RoHS : Compliant | 0 | |||
| EV7751-F-00A | Monolithic Power Systems | (Alt: EV7751-F-00A) RoHS : Compliant | 0 | |||
| MIC3775-1.8YMM | Microchip Technology Inc | 750MA LOW VOLTAGE UCAP LDO (Alt: MIC3775-1.8YMM) RoHS : Compliant | 0 | |||
| SAF7751HV/N208WY | NXP Semiconductors | SAF7751HV (Alt: SAF7751HV/N208WY) RoHS : Compliant | 0 | |||
| MIC2775-17YM5-TR | Microchip Technology Inc | Volt Supervisor Power Supply Supervisory 169V 55V 5Pin SOT23 TR (Alt: MIC2775-17YM5-TR) RoHS : Compliant | 0 | |||
MIC3775-1.5YMM-TR![]() | Microchip Technology Inc | 750MA LOW VOLTAGE UCAP LDO (Alt: MIC3775-1.5YMM-TR) RoHS : Compliant | 0 | |||
| SAF7751HV/N204,518 | NXP Semiconductors | PHSSAF7751HVN204518 (Alt: SAF7751HV/N204Y) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | D-UDK4 2775113 | Chiphomer Technology Ltd | 278 | |||
![]() Component Electronics, Inc | 47751-000 | Amphenol FCi | IN STOCK SHIP TODAY |
| 25 | |
| LTS-7751R | Lite-On Semiconductor Corporation | IN STOCK SHIP TODAY |
| 15 | ||
| 1-006-775-11 | Sony Batteries | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 187V32F11-17.75-15 | Tech-Etch | 187V32F11-17.75-15 | 1,816 | ||
| M0775-10-SS-20 | RAF Electronic Hardware | SS SPACER 16X6MM |
| 130 | ||
| 7751-18 | HeliCoil | 0 | ||||
| 497751 | Essentra Components | 0 | ||||
| PAKKL-5775-19 | Essentra Components | ClipAdjSnap InNat.57-.75 in Hold Clip Adj Snap In Natural | 0 | |||
| 17751-5 | HeliCoil | 0 | ||||
| 7751-20 | HeliCoil | HAND TOOL M20X2.5 | 0 | |||
| 51-77-514-26 | Southco | These screws and captive screws provide an attractive polished finish and ample shaft length to mate with threaded receptacle on frame throughout a range of panel thicknesses. | 0 | |||
| 7751-4 | HeliCoil | HAND TOOL TYPE II - M4X0.7 | 0 | |||
| 7751-2 | HeliCoil | 0 | ||||
| 17751-2.5 | HeliCoil | 0 | ||||
| 7751-3 | HeliCoil | 0 | ||||
| 7751-12 | HeliCoil | HAND TOOL M12X1.75 | 0 | |||
| 7751-5M | HeliCoil | 0 | ||||
| 7751-30 | HeliCoil | HAND TOOL M30X3.5 | 0 | |||
![]() EBV Elektronik | NCV7751DQR2G | onsemi | Twelve LowSide Relay Drivers (Alt: NCV7751DQR2G) RoHS : Compliant | 0 | ||
BTM7751GXUMA1![]() | Infineon Technologies AG | Power Switch Hi SideLo Side 14A 28Pin DSO TR (Alt: SP000306882) RoHS : Compliant | 0 | |||
| MIC3775-1.5YMM | Microchip Technology Inc | (Alt: MIC3775-1.5YMM) RoHS : Compliant | 0 | |||
| SAF7751HV/N208W | NXP Semiconductors | MULTITUNER CAR RADIO AUDIO ONECHIP (Alt: SAF7751HV/N208W) RoHS : Compliant | 0 | |||
| SAF7751HN/N208WK | NXP Semiconductors | SAF7751HN (Alt: SAF7751HN/N208WK) RoHS : Compliant | 0 | |||
| SAF7751HV/N208WK | NXP Semiconductors | SAF7751HV (Alt: SAF7751HV/N208WK) RoHS : Compliant | 0 | |||
| SAF7751HV/N208WY | NXP Semiconductors | SAF7751HV (Alt: SAF7751HV/N208WY) RoHS : Compliant | 0 | |||
| MIC2775-17YM5-TR | Microchip Technology Inc | Volt Supervisor Power Supply Supervisory 169V 55V 5Pin SOT23 TR (Alt: MIC2775-17YM5-TR) RoHS : Compliant | 0 | |||
MIC3775-1.5YMM-TR![]() | Microchip Technology Inc | 750MA LOW VOLTAGE UCAP LDO (Alt: MIC3775-1.5YMM-TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M9177/5-1 | Amphenol Nexus | Circular Conn |
| 1,441 | |
| MS27751-7 | Leach International Corporation | Relays & Cont | 6 | |||
| J1307-75-10 | SOURIAU-SUNBANK | Backshells & Ac | 1 | |||
| MS28775-110 | Parker Hannifin Corp | Hardware | 1 | |||
| MS27751-8 | Leach International Corporation | Relays & Cont | 0 | |||
| MS27751-5 | Leach International Corporation | Relays & Cont | 0 | |||
| MS27751-19 | Leach International Corporation | Relays | 0 | |||
| MS27751-4 | Leach International Corporation | Relays & Cont | 0 | |||
| 4567775-1H | Aptiv PLC | Connector |
| 0 | ||
| 2079775-1 | TE Connectivity | Relays | 0 | |||
| MS27751-3 | Leach International Corporation | Relays | 0 | |||
| MS27751-6 | Leach International Corporation | Relays | 0 | |||
| MS27751-1 | Leach International Corporation | Relays & Cont | 0 | |||
| MS27751-21 | Leach International Corporation | Relays & Cont | 0 | |||
| MS27751-2 | Leach International Corporation | Relays & Cont | 0 | |||
![]() Flip Electronics | SAF7751HV/N205WY | NXP Semiconductors | Stock | 2,500 | ||
| SAF7751HV/N208NTY | NXP Semiconductors | Stock | 2,000 | |||
| SAF7751HV/N205W/AK | NXP Semiconductors | Stock | 1,200 | |||
| SAF7751HV/N208NSK | NXP Semiconductors | Stock | 1,000 | |||
| SAF7751HV/N208ES/K | NXP Semiconductors | Stock | 1,000 | |||
| SAF7751HV/N208NTK | NXP Semiconductors | Stock | 810 | |||
| SAF7751HV/N208W/QK | NXP Semiconductors | Stock | 600 | |||
| SAF7751HN/N207NTK | NXP Semiconductors | Stock | 498 | |||
| SAF7751HV/N208W/WK | NXP Semiconductors | Stock | 200 | |||
![]() Maritex | 927775-1 | TE Connectivity | Rectangular Connector Contacts; 927775-1; TE CONNECTIVITY; Tin; Crimp; Cable; Receptacle RoHS : Compliant |
| 296 | |
![]() Pasternack Enterprises US | PE3W04775-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to SMA Male Right Angle Cable 12 Inch Length Using RG141 Coax., Radio frequency assembly N female bulkhead to SMA male right angle cable 12 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMA male right angle cable 12 inch length using RG141 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and right angle SMA cable connection on the other. Our type N to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W04775-12 can also be known as a type N jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3W04775-12 is built with RG141 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency type N female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04775-12 can also be used in the other direction and will be right angle SMA male to N type female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male right angle cable 12 inch length using RG141 coax. |
| 324 | |
| PE3C6775-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMC Plug to SMC Plug Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly SMC plug to SMC plug cable 12 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC plug to SMC plug cable 12 inch length using RG400 coax, SMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and plug on end 2. PE3C6775-12 can also be known as a SMC male to SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE3C6775-12 is built with RG400 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMC plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMC male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug cable 12 inch length using RG400 coax. |
| 16 | ||
| PE7751-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 3 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-3 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7751-3 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 3 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 8 | ||
| PE7751-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1.5 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 30 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-30 fixed attenuator is available with a typical attenuation accuracy of 1.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7751-30 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 30 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE3775-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Male Right Angle Cable 18 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 18 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 18 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3775-18, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3775-18 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 18 inch length using RG174 coax. |
| 3 | ||
| PE3C10775-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to SSMC Plug Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10775-12 1.85mm male to SSMC plug RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10775-12 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10775-12 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10775-12 1.85mm plug to SSMC male cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10775-12 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10775-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to SSMC Plug Cable 18 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10775-18 1.85mm male to SSMC plug RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10775-18 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10775-18 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10775-18 1.85mm plug to SSMC male cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10775-18 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 2 | ||
| PE7751-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 10 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7751-10 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE3W07751 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SSMC Plug to MMCX Jack Cable Using RG174 Coax. PE3W07751 is a SSMC plug to MMCX jack cable using RG174 coax. This Pasternack SSMC plug to MMCX jack cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm MMCX for connector 2. Our plug SSMC to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07751 SSMC plug to MMCX jack cable assembly is constructed with RG174 coax. | 0 | |||
| PE37751 | Pasternack Enterprises | 0 | ||||
| PE3W17751 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/2SFHC, RF Cable Type: 1/2" Superflexible, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using 1/2 inch Superflexible Coax. PE3W17751 is a N male to N male cable using 1/2" Superflexible coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W17751 N male to N male cable assembly is constructed with 1/2" Superflexible coax. | 0 | |||
| PE3W08775-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Plug Right Angle to Water Blue FAKRA Plug Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly MCX plug right angle to water blue FAKRA plug cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to water blue FAKRA plug cable 12 inch length using RG174 coax, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and FAKRA cable connection on the other. Our right angle MCX to FAKRA cable assemblies have a plug gender on end 1 and plug on end 2. PE3W08775-12 can also be known as a right angle MCX male to FAKRA male cable assembly and will be shipped same-day as it is purchased. MCX male to FAKRA male cable assembly PE3W08775-12 is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX right angle plug to FAKRA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08775-12 can also be used in the other direction and will be FAKRA plug to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to FAKRA male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to FAKRA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to water blue FAKRA plug cable 12 inch length using RG174 coax. |
| 0 | ||
| PE7751-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 6 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-6 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7751-6 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 6 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE3C7751 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE7751-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 20 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-20 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7751-20 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 20 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
![]() TE Connectivity | 1-1734775-1 | TE Connectivity | Std USB Type A, Flag, T/H, 1.8A USB Type: A Connector Profile: Standard USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 4 A Standard 2.0 Receptacle | Usb Connector | Part Number: 1-1734775-1 | Internal Number: 1-1734775-1 | TE Connectivity RoHS : Compliant |
| 9,172 | |
| 60775-1 | TE Connectivity | SPADE TERMINAL 18-14 AWG BR Spade Terminal Type: Spade Tongue Terminal Wire Size: 18 – 14 AWG Wire Size: .8 – 2.08 mm² Wire Size: 1624 – 4106 CMA Stud Size: #10 Spade Tongue Terminal 18 – 14 AWG .8 – 2.08 mm² 1624 – 4106 CMA | Spade Terminal | Part Number: 60775-1 | Internal Number: 60775-1 | TE Connectivity RoHS : Compliant |
| 8,928 | ||
| 641775-1 | TE Connectivity | 04P UMNL STR/REL & INSRT NATL Connector Cover Type: Strain Relief Cover Primary Product Color: Natural Primary Product Material: Nylon Number of Positions: 4 Operating Temperature (Max): 105 °C Strain Relief Cover Natural | Connector Cap & Cover | Part Number: 641775-1 | Internal Number: 641775-1 | Nylon | TE Connectivity RoHS : Compliant |
| 1,714 | ||
| 2-35775-1 | TE Connectivity | TERMINAL,SOLIS R 16-14HD 1/4 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: M6 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Ring Terminal | Part Number: 2-35775-1 | Internal Number: 2-35775-1 | TE Connectivity RoHS : Compliant |
| 1,706 | ||
| 5106775-1 | TE Connectivity | Z-PACK/C VF 55P PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 11 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 11 5 | Hard Metric Backplane Connector | Part Number: 5106775-1 | Internal Number: 5106775-1 | TE Connectivity RoHS : Compliant |
| 1,691 | ||
| 2311775-1 | TE Connectivity | AMPL PLUG, HD22, R/A, 15P, S/L Number of Positions: 15 Connector & Housing Type: Plug Connector System: Wire-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 15 Plug Wire-to-Board Board Mount | Part Number: 2311775-1 | Internal Number: 2311775-1 | TE Connectivity RoHS : Compliant |
| 801 | ||
| 54775-1 | TE Connectivity | TERMINAL,PG R 16-14 6-8-10 Ring Terminal Product Type: Multiple Stud Size Ring Tongue Terminal Wire Size: 16 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #8 #10 #6 Multiple Stud Size Ring Tongue Terminal 16 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Ring Terminal | Part Number: 54775-1 | Internal Number: 54775-1 | TE Connectivity RoHS : Compliant |
| 681 | ||
| 5787775-1 | TE Connectivity | 68 .8MM CHAMP OFSET CBL KIT Number of Positions: 68 Connector & Housing Type: Plug Connector System: Cable-to-Cable Connector Mounting Type: Free-Hanging (In-Line) Centerline (Pitch): .8 mm D-Shaped Connector | 68 Plug Cable-to-Cable Free-Hanging (In-Line) | Part Number: 5787775-1 | Internal Number: 5787775-1 | .8 mm | TE Connectivity RoHS : Compliant |
| 403 | ||
![]() Vyrian | AD7751ABRS![]() | Analog Devices Inc | Analog Circuit, 1 Func, CMOS, PDSO24 RoHS : Not Compliant | 12,330 | ||
| MAX77751FEFG+ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +13.7V RoHS : Compliant | 10,748 | |||
AD7751AAN![]() | Analog Devices Inc | Analog Circuit, 1 Func, CMOS, PDIP24 RoHS : Not Compliant | 10,331 | |||
| MAX77511AEWB+ | Analog Devices Inc | RoHS : Compliant | 10,146 | |||
| MAX77751CEFG+T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +13.7V RoHS : Compliant | 9,511 | |||
| BQ27751DRZR | Texas Instruments | 9,283 | ||||
| MAX77511MEWB+T | Analog Devices Inc | Switching Regulator RoHS : Compliant | 9,273 | |||
| MAX77511AEWB-T | Analog Devices (Maxim Integrated) | 9,075 | ||||
| SAF7751HV-N208W-WK | NXP Semiconductors | 8,137 | ||||
| MAX77751FEFG | Analog Devices (Maxim Integrated) | 7,386 | ||||
| MAX77751GEFG+T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +13.7V RoHS : Compliant | 6,262 | |||
MSP430F67751AIPEU![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP128 RoHS : Compliant | 5,401 | |||
| 2775184 | Phoenix Contact | Modular Terminal Block, 6mm2, 2 Row(s), 2 Deck(s) RoHS : Compliant | 5,245 | |||
| SAF7751HV-N208W-QK | NXP Semiconductors | 5,004 | ||||
MSP430F67751AIPEUR![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP128 RoHS : Compliant | 4,888 | |||
![]() Waytek, Inc. | PC775-1A-12C-D2-X | Picker Components | Power Relay 75A, 12V SPST w/Double Diode |
| 1,940 | |
| PC775-1A-12C-X | Picker Components | Power Relay 75A, 12V SPST Dual Contact |
| 1,331 | ||
| PC775-1A-12C-D-X | Picker Components | Picker Power Relay 75A, 12V SPST w/ Diode |
| 1,266 | ||
| PC775-1A-24C-R-X | Picker Components | Picker Power Relay 50A, 24V SPST w/ Resistor |
| 547 | ||
| PC775-1A-24C-X | Picker Components | Picker Power Relay 50A, 24V SPST |
| 373 | ||
![]() Win Source Electronics | BTM7751G![]() | Infineon Technologies AG | IC BRIDGE DRIVER PAR 28DSO RoHS : Compliant |
| 15,000 | |
BTM7751GXUMA1![]() | Infineon Technologies AG | RoHS : Compliant |
| 13,510 | ||
| 744775147 | Wurth Elektronik | FIXED IND 47UH 1.17A 180MOHM SMD RoHS : Compliant |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |