| Electronic Components Datasheet Search |
|
7713 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 77138-101LF | Amphenol FCi | Contact SKT Crimp ST Cable Mount 26-30AWG Minitek® T/R RoHS : Compliant |
| 160,000 | |
| 77138-101LF | Amphenol FCi | Contact SKT Crimp ST Cable Mount 26-30AWG Minitek® T/R RoHS : Compliant |
| 55,000 | ||
| 77138-201LF | Amphenol FCi | Minitek® 2.00mm, Board/Wire to Board Connector, Crimp-to-Wire AWG 26-30 RoHS : Compliant |
| 40,000 | ||
| 77138-201LF | Amphenol Corporation | 77138-201LF |
| 40,000 | ||
| 77138-201LF | Amphenol FCi | Minitek® 2.00mm, Board/Wire to Board Connector, Crimp-to-Wire AWG 26-30 RoHS : Compliant |
| 20,000 | ||
| 77138-101LF | Amphenol FCi | Contact SKT Crimp ST Cable Mount 26-30AWG Minitek® T/R RoHS : Compliant |
| 6,600 | ||
| 771-305-C | Approved Technology | 771-305-C |
| 3,759 | ||
| 771-300-C | Approved Technology | 771-300-C |
| 3,681 | ||
| 771-301-C | Approved Technology | 771-301-C |
| 3,678 | ||
| 771-302-C | Approved Technology | 771-302-C |
| 3,488 | ||
| 771-303-C | Approved Technology | 771-303-C |
| 3,168 | ||
![]() Avnet Americas | 77138-101LF | Amphenol Corporation | Contact, FCI Minitek, Socket, Crimp, 26 AWG, Gold Plated Contacts, 2mm Minitek System - Tape and Reel (Alt: 77138-101LF) RoHS : Compliant |
| 40,000 | |
| 77138-001LF | Amphenol Corporation | - Tape and Reel (Alt: 77138-001LF) RoHS : Compliant |
| 40,000 | ||
| 927771-3 | TE Connectivity | Rectangular Power Contact, JPT, Tin Plated Contacts, Bronze, Socket, Crimp, 20 AWG - Tape and Reel (Alt: 927771-3) RoHS : Compliant |
| 8,000 | ||
| 1-2203771-3 | TE Connectivity | Connector Sealed Housing Plug 3Position 4mm Crimp Straight Cable Mount Bulk - Bulk (Alt: 1-2203771-3) RoHS : Not Compliant |
| 0 | ||
| 1771370000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1771370000) RoHS : Compliant |
| 0 | ||
| UZ7713 | Microchip Technology Inc | Diode Zener Single 13V 5% 10W 2-Pin Case C - Bulk (Alt: UZ7713) RoHS : Not Compliant |
| 0 | ||
| D0007713 | VPG Foil Resistors | Resistor High Precision/Power Metal Foil 10 Ohm 0.25% 1.5W ?5ppm/?C - Bulk (Alt: D0007713) RoHS : Not Compliant |
| 0 | ||
| R577133015LP | Radiall | DPDT RAMSES LOW PIM N 12.4GHZ LATCHING 28VDC POSITIVE COMMON D-SUB CONNECTOR WITH BRACKET - Bulk (Alt: R577133015LP) RoHS : Not Compliant |
| 0 | ||
| FW-05-05-F-D-377-137-TR | Samtec Inc | - Tape and Reel (Alt: FW-05-05-F-D-377-137-TR) RoHS : Compliant |
| 0 | ||
| C1206T475K3RCL38877136 | KEMET Corporation | - Custom Tape W/Leader (Alt: C1206T475K3RCL38877136) RoHS : Not Compliant |
| 0 | ||
| R577132005 | Radiall | - Bulk (Alt: R577132005) RoHS : Not Compliant |
| 0 | ||
| C0402T104K8RCL38877136 | KEMET Corporation | - Custom Tape W/Leader (Alt: C0402T104K8RCL38877136) RoHS : Not Compliant |
| 0 | ||
| 2377130-8 | TE Connectivity | EP II PLUG HOUSING, 8P, NON-GWT - Bag (Alt: 2377130-8) RoHS : Not Compliant |
| 0 | ||
| R577133005 | Radiall | - Bulk (Alt: R577133005) RoHS : Compliant |
| 0 | ||
| 42377-1363 | Molex | - Bulk (Alt: 0423771363) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 77138-101LF | Amphenol Corporation | Headers & Wire Housings Crimp-to-wire Cont AWG26-30,.76um,Gold RoHS : Compliant |
| 284,121 | |
| 77138-001LF | Amphenol Corporation | Headers & Wire Housings Crimp-to-wire Cont AWG26-30,.2um,Gold RoHS : Compliant |
| 174,039 | ||
| 77138-T01LF | Amphenol Corporation | Headers & Wire Housings MINITEK TERMINALS |
| 49,438 | ||
| 77138-201LF | Amphenol Corporation | Headers & Wire Housings Crimp-to-wire Cont AWG26-30,.5um,Gold RoHS : Compliant |
| 8,012 | ||
| S32K311NHT0MLFST | NXP Semiconductors | ARM Microcontrollers - MCU S32K311 Arm Cortex-M7, 120 MHz, 1 MB Flash, CAN FD, HSE B security, 48 LQFP - S32K MCUs for General-Purpose RoHS : Compliant |
| 1,857 | ||
| S32K310NHT0MLFST | NXP Semiconductors | ARM Microcontrollers - MCU S32K310 Arm Cortex-M7, 120 MHz, 512 KB Flash, CAN FD, HSE B security, 48 LQFP S32K MCUs for General-Purpose RoHS : Compliant |
| 1,144 | ||
| 7713-0-00-80-00-00-33-0 | Mill-Max Mfg Corp | Circuit Board Hardware - PCB |
| 916 | ||
| 7713 | Keystone Electronics Corp | Standoffs & Spacers CERAMIC THRD .500 RoHS : Compliant |
| 177 | ||
| S32K312NHT0MPAIT | NXP Semiconductors | ARM Microcontrollers - MCU S32K312 Arm Cortex-M7, 120 MHz, 2 MB Flash, ISELED, HSE B security, 100 HDQFP - S32K MCUs for General Purpose RoHS : Compliant |
| 100 | ||
| 77133 SL005 | Alpha Wire | Multi-Conductor Cables 16 AWG 2 Conductor 600V Foil, MPPE, MPPE 100 ft Spool Slate RoHS : Compliant |
| 29 | ||
| 77134 | Wiha Quality Tools | Screwdrivers, Nut Drivers & Socket Drivers Hex 1/4" Drive Bit Socket 6" Long 9/64" RoHS : Compliant |
| 2 | ||
| 77130 | Wiha Quality Tools | Screwdrivers, Nut Drivers & Socket Drivers Hex 1/4" Drive Bit Socket 6" Long 7/64" RoHS : Compliant |
| 1 | ||
| 77135 SL005 | Alpha Wire | Multi-Conductor Cables 16 AWG 4 Conductor 600V Foil, MPPE, MPPE 100 ft Spool Slate RoHS : Compliant |
| 1 | ||
| 7713 | MENDA | Wire Stripping & Cutting Tools CUTTER, LARGE TAPER RAZOR FLUSH LONG |
| 0 | ||
| S32K311NHT0VLFST | NXP Semiconductors | ARM Microcontrollers - MCU S32K311, CES, 48 LQFP RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 77138-101LF | Amphenol FCi | Contact SKT Crimp ST Cable Mount 26-30AWG Minitek® T/R RoHS : Compliant |
| 160,000 | |
| 77138-201LF | Amphenol FCi | Minitek® 2.00mm, Board/Wire to Board Connector, Crimp-to-Wire AWG 26-30 RoHS : Compliant |
| 40,000 | ||
| 77138-101LF | Amphenol FCi | Contact SKT Crimp ST Cable Mount 26-30AWG Minitek® T/R RoHS : Compliant |
| 9 | ||
![]() Newark | 7447713022 | Wurth Elektronik | Pd Inductor, 2.2 Uh, I=5.1 A, 1030; |Würth Elektronik 7447713022 RoHS : Compliant |
| 800 | |
| 7447713022 | Wurth Elektronik | Pd Inductor, 2.2 Uh, I=5.1 A, 1030; |Würth Elektronik 7447713022 RoHS : Compliant |
| 800 | ||
| 74477130 | Wurth Elektronik | Choke, 1000Uh, Smd; |Würth Elektronik 74477130 RoHS : Compliant |
| 607 | ||
| 74477130 | Wurth Elektronik | Choke, 1000Uh, Smd; |Würth Elektronik 74477130 RoHS : Compliant |
| 607 | ||
| 7447713082 | Wurth Elektronik | Inductor, 8.2Uh, 30%, 10.3X10.5Mm, Power; |Würth Elektronik 7447713082 RoHS : Compliant |
| 297 | ||
| 09561617713 | HARTING Technology Group | Hd D-Sub Conn, Plug, 15Pos, Th; |Harting 09561617713 RoHS : Compliant |
| 245 | ||
| 87713-1006 | Molex | Connector, Rcpt, 22Pos, 1Row, 1.27Mm; |Molex 87713-1006 (Alternate Part Number: 883906317690 RoHS : Compliant |
| 88 | ||
| 11_SMA-50-4-77/133_NE | HUBER+SUHNER | Rf Coax Conn, Sma Plug, 50 Ohm, Cable; |Huber+Suhner 11_SMA-50-4-77/133_NE RoHS : Compliant |
| 37 | ||
| 5-077-13 | Bernstein AG | Esd/Smd Tweezer, Straight/Pointed, 130Mm; |Bernstein Werkzeugfabrik 5-077-13 RoHS : Not Compliant |
| 24 | ||
| 16"N-50-7-77/133"NE | HUBER+SUHNER | Rf Coax Conn, N R/A Plug, 50 Ohm, Cable; |Huber+Suhner 16"N-50-7-77/133"NE RoHS : Compliant |
| 10 | ||
| 177133 | Brady Worldwide Inc | Toughstripe Max Floor Marking Footprint; |Brady 177133 RoHS : Compliant |
| 9 | ||
| 2477130000 | Weidmüller Interface GmbH & Co. KG | Thermal Mag Ckt Breaker, 1P, 7A, 120Vac; Product Range:Mcb 489 Series; Current Rating:7A; No. Of Poles:1 Pole; Voltage Rating Vdc:60V; Voltage Rating Vac:120V; Circuit Breaker Mounting:Din Rail Rohs Compliant: Yes |Weidmuller 2477130000 RoHS : Compliant |
| 9 | ||
| 784771331 | Wurth Elektronik | Inductor, Aec-Q200, 330Uh, Shld, 0.8A; |Würth Elektronik 784771331 RoHS : Compliant |
| 5 | ||
| 784771331 | Wurth Elektronik | Inductor, Aec-Q200, 330Uh, Shld, 0.8A; |Würth Elektronik 784771331 RoHS : Compliant |
| 5 | ||
| 7713 | Keystone Electronics Corp | Ceramic Standoff; |Keystone 7713 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | AD7713ANZ![]() | Analog Devices Inc | 24 BIT SIGMA DELTA ADC IC RoHS : Compliant |
| 333 | |
AD7713ARZ-REEL![]() | Analog Devices Inc | 24 BIT SIGMA DELTA ADC IC RoHS : Compliant |
| 0 | ||
AD7713ARZ![]() | Analog Devices Inc | 24-BIT SIGMA DELTA ADC IC RoHS : Compliant |
| 0 | ||
![]() RS | 1077-1-32-B | RS Pro | MINIATURE CIRCUIT BREAKER, 1 POLE, 32A, B CURVE, UL 1077, DIN RAIL MOUNT |
| 144 | |
| 7447713102 (7896895) | Wurth Elektronik | WE-PD SMD SHIELDED POWER INDUCTOR |
| 50 | ||
| 7447713047 (7896886) | Wurth Elektronik | HIGH CURRENT INDUCTOR, FIXED, 1030, 4.7 UH, 4 A, 0.034 OHM, WE-PD SERIES |
| 47 | ||
| 7447713331 (7896918) | Wurth Elektronik | INDUCTORS, FIXED, WE-PD 1030 330UH .48A 1.5OHM |
| 45 | ||
| CA771/3 | Altech Corporation | SINGLE LEVEL TERMINAL BLOCKS INTERNAL JUMPER CTS35UN 3 POLE |
| 20 | ||
| 0 771 32 | Pass & Seymour | WHITE 1 GANG POLYCARB UNSWITCHED POWER SOCKET, TYPE E-FRENCH,16A, FLUSH MOUNT, IP41 |
| 9 | ||
| 11_SMA-50-4-77/133_NE (85010193) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS SMA STRAIGHT CABLE PLUG |
| 5 | ||
| 1393771-3 | TE Connectivity | RELAY, REED, SPST-NO, 500MA, CTRL-V 5/6DC, VOL-RTG 100DC, PCB MNT, RoHS : Compliant |
| 4 | ||
| 2077138 | RS Pro | HIGH TEMPERATURE EQUIPMENT HOOK-UP WIRE, RED 164FT 28AWG, 1 0.32MM ETFE |
| 3 | ||
| 11_TNC-50-4-77/133_NE (85010169) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS TNC STRAIGHT CABLE PLUG |
| 3 | ||
| 2907713 | Phoenix Contact | TIMER RELAY; ETD-BL-2T-I-230; 2.5VA; 300V; 4KV RoHS : Compliant |
| 2 | ||
| 1771329 | RS Pro | FOAM SWABS PP HANDLE FOR USE WITH ELECTRONICS 71MM LENGTH PACK OF 50 |
| 2 | ||
| 2277132 | Phoenix Contact | CURRENT TRANSFORMER, WINDOW-TYPE, 600A AC PRIMARY, 5A AC SECONDARY, PACT SERIES RoHS : Compliant |
| 1 | ||
| FUSE 713057 (713057) | Fluke Calibration | LOT QTY ,FUSE, FAST 2A 250V LOT QTY 25 |
| 1 | ||
| 7713 | Keystone Electronics Corp | STANDOFF, 3/8 ROUND, FEMALE, THREADED 6-32, L .500, COM. GRADE L5 CERAMIC/GLAZE |
| 0 | ||
![]() Microchip Technology Inc | UZ7713 | Microchip Technology Inc | Voltage Regulator _ Mini-Stud, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
| 23477134-001-0 | Microchip Technology Inc | OBS LC00795 01-12 MDL ASSY, RS422 OUTPUT, Projected EOL: 2028-11-28 - Contact for Pricing | 0 | |||
![]() Bisco Industries | MS24677-137U | Quality Socket Screw Manufacturing Corporation | 78 | |||
| 77136 | Holo-Krome | 50 | ||||
| 5277-13M | Advanced Interconnect | 34 | ||||
| BR5177-13.0-61 | Lyn-Tron Inc | 14 | ||||
![]() Future Electronics | 7713 | Keystone Electronics Corp | 0.5" Length Ceramic Stand-Off 6-32 Thread RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 990-7713-000 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 990-7713-000 RoHS : Compliant |
| 543 | |
| 7713 | 3M | RoHS : Compliant |
| 0 | ||
| RFF-7713 | Pan Pacific | F-59, 1/2 RING F CONNECTOR RoHS : Compliant |
| 0 | ||
| 62800-7713 | Molex | WIRE LOCATOR RoHS : Compliant |
| 0 | ||
| 7713-BSS | Marinco Electrical Group | Solenoid ML RBS 12V SPSTwMan RoHS : Compliant |
| 0 | ||
| XN-4004-7713-1 | 3M Interconnect | 3M BOARDMOUNT SOCKET .050 RoHS : Compliant |
| 0 | ||
| JE-1503-7713-1 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 11-32-7713 | Molex | PLUG RETAINER RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD7713SQ![]() | Analog Devices Inc | IC ADC 1 CONV 24Bits Sigma-Delta 3-Wire Serial, 4-Wire Serial 24-DIP Tube RoHS : Not Compliant |
| 1,348 | |
| PT7713N | Texas Instruments | Switching Regulator, 20A, 400kHz Switching Freq-Max, Hybrid, MSMA27 RoHS : Not Compliant |
| 30 | ||
TPS77133DGKR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 150mA 8-SOP T/R RoHS : Compliant |
| 14,584 | ||
HD6417713BP![]() | Renesas Electronics Corporation | IC MCU SH-3 DSP 32Bit 1 Core ROMless 200MHz 256-BGA RoHS : Not Compliant |
| 5 | ||
HD6417713BPV![]() | Renesas Electronics Corporation | IC MCU SH-3 DSP 32Bit 1 Core ROMless 200MHz 256-BGA RoHS : Compliant |
| 373 | ||
![]() Sager | 7713 | Keystone Electronics Corp | Standoffs & Spacers CERAMIC THRD .500 |
| 0 | |
| P7-713129 | OTTO Engineering Inc | Basic / Snap Action Switches | 0 | |||
| 0082247713 | Molex | Flat Cables RoHS : Compliant | 0 | |||
| 1771333 | Phoenix Contact | Phoenix Contact EASYPOE34X-PNC | 0 | |||
| 1187713001 | TE Connectivity | Multi-Conductor Cables 99M1121-18-0/9-0 RoHS : Compliant |
| 0 | ||
| 0791077132 | Molex | MGRID VREC DR W/OPGS GFLF 16CKT |
| 0 | ||
| FW-05-05-F-D-377-137-TR | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-40-04-G-D-377-133 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| P7-713221 | OTTO Engineering Inc | Basic / Snap Action Switches | 0 | |||
| TW-05-05-S-D-377-138 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 2907713 | Phoenix Contact | Time Delay & Timing Relays ETD-BL-2T-I-230 RoHS : Compliant |
| 0 | ||
| 70177-1341 | OMRON Electronic Components | DIP Switches / SIP Switches ID20,SXGA,UHD,400mm,X | 0 | |||
| 70177-1378 | OMRON Electronic Components | DIP Switches / SIP Switches MV20,5MP,SD,102mm,AV SENS | 0 | |||
| 1577136 | Phoenix Contact | IES26GF-2HV-RR-24RJ45-2MMSC | 0 | |||
| 2377130-8 | TE Connectivity | TE Connectivity EP II plug housing, 8P, NON-GWT RoHS : Compliant |
| 0 | ||
![]() TME | 77138-201LF | Amphenol Corporation | Connector: wire-board; socket; female; data; Plating: gold-plated |
| 40,000 | |
| 2377130-4 | TE Connectivity | Connector: wire-board; plug; female; data; POWER; Inom: 12.3A; PIN: 4 RoHS : Compliant |
| 6,000 | ||
| 2377130-6 | TE Connectivity | Connector: wire-board; plug; female; data; POWER; Inom: 12.3A RoHS : Compliant |
| 3,000 | ||
| 677-1325-333F | Dialight | Indicator: LED; orange; 15mA RoHS : Compliant |
| 175 | ||
| CBTC..8..77.136 (2 1/2") | DROMET sp zoo | U-bolt; M8; 1.25; C; steel; zinc; Thread len: 70mm; Int.width: 77mm |
| 65 | ||
| 77132 | Goobay | Adapter; DisplayPort socket,DisplayPort plug 90° left/right |
| 7 | ||
| 5-117-7-13 | Bernstein AG | Tweezers: straight; tips serrated; Blade tip shape: flat,rounded |
| 7 | ||
| 77131 | Goobay | Adapter; DisplayPort socket,DisplayPort plug 90° left/right |
| 4 | ||
| 77130 | Goobay | Adapter; DisplayPort socket,DisplayPort plug 90° up/down |
| 1 | ||
| 09564617713 | HARTING Technology Group | Connector: D-Sub HD; PIN: 62; socket; male; data transfer; on PCBs RoHS : Compliant |
| 0 | ||
| 7713170 | Gedore Torque Ltd | Wrench tip; torque,box; Spanner: 16mm; Socket size: 16mm |
| 0 | ||
| 8177139 | Bossard Group | Washer; internally serrated; h=2.6mm; M10; D=20mm; spring steel |
| 0 | ||
| 7713090 | Gedore Torque Ltd | Wrench tip; torque,box; Spanner: 15mm; Socket size: 16mm |
| 0 | ||
| 77130 | ProLinear/PONTECH Inc | Drill bit; for metal; Ø: 13mm; L: 151mm; high speed steel; tube |
| 0 | ||
| 7713250 | Gedore Torque Ltd | Wrench tip; torque,box; Spanner: 17mm; Socket size: 16mm |
| 0 | ||
![]() Ameya Holding Limited | 7771-3 | Keystone Electronics Corp | TERMINAL SCREW METRIC HORZ BLK RoHS : Unknown | 890 | ||
| 7713 | Keystone Electronics Corp | 0.5 Length Ceramic Stand-Off 6-32 Thread | 241 | |||
![]() ComSIT USA | BB619E7713 | Siemens | SILICON VARIABLE CAPACITANCE DIODE Variable Capacitance Diode, Very High Frequency, 38.7pF C(T), 30V, Silicon RoHS : Not Compliant | 61,698 | ||
| 77138001LF | Amphenol FCi | RECT CONN CONTACT Socket 26-30 AWG Crimp Gold T/R RoHS : Compliant | 20,000 | |||
| 7447713101 | Adolf Wuerth Gmbh & Co Kg | SMD SHIELDED POWER INDUCTOR General Purpose Inductor, 100uH, 20%, 1 Element, Manganese-zinc-Core, SMD, 3939 RoHS : Compliant | 570 | |||
AD7713AR![]() | Analog Devices Inc | LC2MOS LOOP-POWERED SIGNAL CONDITIONING ADC ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDSO24 RoHS : Not Compliant | 322 | |||
![]() Interstate Connecting Components | 87713-1006 | Molex | 1.27MM SATA REC BKPLNSMT T&R. 6AULF22CKT RoHS : Compliant |
| 1,400 | |
| 2107713-1 | TE Connectivity | DDC 240-35 V2006 RoHS : Compliant | 0 | |||
| 1187713001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC99M1121-18-0/9-0 RoHS : Compliant | 0 | |||
| 2377130-8 | TE Connectivity | EP II PLUG HOUSING, 8P, NON-GW RoHS : Compliant | 0 | |||
| 1-2203771-3 | TE Connectivity | 3POS, MCON 1.2 CB REC 1P TL SE RoHS : Compliant |
| 0 | ||
| 91-569771-35P | Amphenol Aerospace | 0 | ||||
| 2-1577133-5 | TE Connectivity | ASSY, MODULE EN4165, MALE, 12 | 0 | |||
| 2107713-2 | TE Connectivity | SDC 240-35 V2006 RoHS : Compliant | 0 | |||
| 447AS771-36 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 1478771-3 | TE Connectivity | ANTI-VIB NYLON GLD 20MM WHT |
| 0 | ||
| 10157577-131011LF | Amphenol FCi | FITMATE 2.0, HEADER, VER-TICAL | 0 | |||
| 2377130-7 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 317-7131-000 | ITT Interconnect Solutions | CT317-7131-000 | 0 | |||
| 2-2176771-3 | TE Connectivity | RT 2B 0.33W 21K 0.1% 25PPM 5K RoHS : Unknown | 0 | |||
| 1077133-1 | TE Connectivity | SCD5166 5004 09SMB RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | S3636-7713-12 | SOURIAU-SUNBANK |
| 0 | ||
| 91-569771-35S | Amphenol Corporation |
| 0 | |||
| 317-7131-000 | ITT Interconnect Solutions |
| 0 | |||
| 317-7130-000 | ITT Interconnect Solutions |
| 0 | |||
| S4049FM-7713-12-2 | SOURIAU-SUNBANK |
| 0 | |||
| S3372A-77130651 | SOURIAU-SUNBANK |
| 0 | |||
| S3150FMS7713RZ30S | SOURIAU-SUNBANK |
| 0 | |||
| S2707-71-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173FM7713S1.5-34-3 | SOURIAU-SUNBANK |
| 0 | |||
| 88-569771-35S | Amphenol Corporation |
| 0 | |||
| S4049FMR7713-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4347-7713-34 | SOURIAU-SUNBANK |
| 0 | |||
| 677-1315-333F | Dialight | RoHS : Compliant |
| 0 | ||
| F7-569771-35P | Amphenol Corporation |
| 0 | |||
| S3143R7713S70 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 1-1971771-3 | TE Connectivity | Connectors RoHS : Compliant |
| 76,068 | |
| 2377130-7 | TE Connectivity | TE COMPONENT (REF 2377130-7) RoHS : Compliant |
| 1,682 | ||
| 2377130-8 | TE Connectivity | TE COMPONENT (REF 2377130-8) RoHS : Compliant |
| 528 | ||
| 37.713 | Altech Corporation | PCB Plug, 13 Pole, 5.00mm, horizontal |
| 243 | ||
| ASP-177139-01 | Samtec Inc | Header / Socket Strip |
| 149 | ||
| Y6332-377-13010000 | TE Connectivity | CONNECTOR (MFR REF 6332-377-13010000) |
| 74 | ||
| CA771/3 | Altech Corporation | Internal Jumper, Screw, 16mm spacing, 3 |
| 53 | ||
| 2-1577133-5 | TE Connectivity | Connectors |
| 34 | ||
| 09651617713 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV ML SSD RoHS : Compliant |
| 6 | ||
| 10117771-3030LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 5 | ||
| 88-463077-13W | Amphenol Corporation | RECEPT |
| 4 | ||
| RFI77-13 | Trompeter | RFI Cap |
| 4 | ||
| 87-525077-13S | Amphenol Corporation | RECEPT |
| 2 | ||
| 1077133-1 | TE Connectivity | SMB RoHS : Compliant |
| 2 | ||
| 91-569771-35G | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() Richardson RFPD | AD7713ARZ![]() | Analog Devices Inc | 2-Channel Single ADC Delta-Sigma 3.9ksps 24-bit Se RoHS : Compliant |
| 0 | |
| R577133005 | Radiall | RF Switch 0MHz to 12.4GHz 60dB RoHS : Not Compliant |
| 0 | ||
| SI5350A-B07713-GM | Skyworks Solutions Inc | Clock Generator 25MHz to 27MHz-IN 200MHz-OUT 20-Pi RoHS : Compliant | 0 | |||
| R161177137W | Radiall | Conn Type N 0Hz to 11GHz 50Ohm RA Cable Mount PL S RoHS : Not Compliant | 0 | |||
AD7713ANZ![]() | Analog Devices Inc | 2-Channel Single ADC Delta-Sigma 3.9ksps 24-bit Se RoHS : Compliant |
| 0 | ||
| R577132000 | Radiall | RF Switch 0MHz to 12.4GHz 60dB RoHS : Not Compliant |
| 0 | ||
934067713215![]() | NXP Semiconductors | Trans RF BJT NPN 30V 0.08A 450mW Automotive 4-Pin RoHS : Compliant | 0 | |||
| SI5350A-B07713-GMR | Skyworks Solutions Inc | Clock Generator 25MHz to 27MHz-IN 200MHz-OUT 20-Pi RoHS : Compliant | 0 | |||
| R577133015 | Radiall | RF Switch DPDT 0MHz to 12.4GHz 60dB RoHS : Not Compliant |
| 0 | ||
| R161177137 | Radiall | RF Coax Cable Mt Con RoHS : Not Compliant | 0 | |||
AD7713ARZ-REEL![]() | Analog Devices Inc | 2-Channel Single ADC Delta-Sigma 3.9ksps 24-bit Se RoHS : Compliant |
| 0 | ||
| 87713-000 | TE Connectivity | Ps801 Proximity Device RoHS : Compliant |
| 0 | ||
| 85177134 | HUBER+SUHNER | Low Power Fixed Attenuator 6GHz RoHS : Compliant |
| 0 | ||
| R577132105 | Radiall | DPDT Ramses N 12.4GHz Latching 12Vdc TTL Diodes D- RoHS : Not Compliant | 0 | |||
934067713235![]() | NXP Semiconductors | Trans RF BJT NPN 30V 0.08A 450mW Automotive 4-Pin( RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 927771-3 | TE Connectivity | INSTOCK RoHS : Compliant | 1,778,400 | ||
| 347713-1 | INSTOCK | 93,000 | ||||
| 927771-3 | INSTOCK | 2,600 | ||||
| 927771-3 | TE Connectivity | INSTOCK RoHS : Compliant | 2,600 | |||
| 86093457713755- | Amphenol FCi | INSTOCK | 950 | |||
| 877131006 | Molex | INSTOCK | 400 | |||
| 4771-3 | API Delevan | INSTOCK | 2 | |||
| 771341-3 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 77138-101LF | Amphenol Corporation | Contact FCI Minitek Socket Crimp 26 AWG Gold Plated Contacts 2mm Minitek System (Alt: 77138-101LF) RoHS : Compliant | 380,000 | ||
| 77138-001LF | Amphenol Corporation | Contact Socket Crimp Straight Cable Mount TR (Alt: 77138-001LF) RoHS : Compliant | 220,000 | |||
| 927771-3 | TE Connectivity | Rectangular Power Contact JPT Tin Plated Contacts Bronze Socket Crimp 20 AWG (Alt: 927771-3) RoHS : Compliant | 176,000 | |||
| 927771-3 | TE Connectivity | Rectangular Power Contact JPT Tin Plated Contacts Bronze Socket Crimp 20 AWG (Alt: 927771-3) RoHS : Compliant | 28,000 | |||
| 877131006 | Molex | Conn Serial ATA F 15Power7Signal POS 127mm Solder ST SMD 22 Terminal 1 Port TR (Alt: 877131006) RoHS : Compliant | 1,200 | |||
| 877131006 | Molex | Conn Serial ATA F 15Power7Signal POS 127mm Solder ST SMD 22 Terminal 1 Port TR - Tape and Reel (Alt: 877131006) RoHS : Compliant | 1,200 | |||
| 1777138 | Phoenix Contact | Terminal Block Header 508 mm 8 Ways 12 A 300 V Through Hole Vertical (Alt: 1777138) RoHS : Compliant | 100 | |||
| 1771321 | Phoenix Contact | SMSTBA 25 5G508 AU SMSTBA255G508AU (Alt: 1771321) RoHS : Compliant | 0 | |||
| 1927713 | Phoenix Contact | MC 15 4ST381 BD41 SO MC154ST381BD41SO (Alt: 1927713) RoHS : Compliant | 0 | |||
| 2377130-8 | TE Connectivity | (Alt: 2377130-8) RoHS : Compliant | 0 | |||
| 1077130-1 | TE Connectivity | (Alt: 1077130-1) RoHS : Compliant | 0 | |||
| 1187713001 | TE Connectivity | (Alt: 1187713001) RoHS : Compliant | 0 | |||
| 1-2203771-3 | TE Connectivity | (Alt: 1-2203771-3) RoHS : Compliant | 0 | |||
| 1-1971771-3 | TE Connectivity | Conn Housing RCP 3 POS 6mm ST Cable Mount (Alt: 1-1971771-3) RoHS : Compliant | 0 | |||
| POS300GT-77-13K3AA | Vitrohm Portuguesa LDA | Resistor 133 kOhm 2 3 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS300GT-77-13K3AA) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2377130-7 | TE Connectivity | (Alt: 2377130-7) RoHS : Compliant | 0 | ||
| 2527713-1 | TE Connectivity | (Alt: 2527713-1) RoHS : Compliant | 0 | |||
| 2377130-4 | TE Connectivity | EP II PLUG HOUSING, 4P, NON-GWT (Alt: 2377130-4) RoHS : Compliant | 0 | |||
| 1-2377130-1 | TE Connectivity | (Alt: 1-2377130-1) RoHS : Compliant | 0 | |||
| 2377130-6 | TE Connectivity | EP II PLUG HOUSING, 6P, NON-GWT (Alt: 2377130-6) RoHS : Compliant | 0 | |||
| 2377130-5 | TE Connectivity | (Alt: 2377130-5) RoHS : Compliant | 0 | |||
| 77138-001LF | Amphenol Corporation | (Alt: 77138-001LF) RoHS : Compliant | 0 | |||
| 77138-101LF | Amphenol Corporation | Contact, FCI Minitek, Socket, Crimp, 26 AWG, Gold Plated Contacts, 2mm Minitek System (Alt: 77138-101LF) RoHS : Compliant | 0 | |||
| 2377130-9 | TE Connectivity | EP II PLUG HOUSING, 9P, NON-GWT (Alt: 2377130-9) RoHS : Compliant | 0 | |||
| 2077131254 | Molex | Contact Socket Crimp ST Cable Mount (Alt: 2077131254) RoHS : Compliant | 0 | |||
| 927771-3 | TE Connectivity | (Alt: 927771-3) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 77138-001 | Amphenol FCi | IN STOCK SHIP TODAY |
| 19,700 | |
| 4771-3TSB | Oupiin | IN STOCK SHIP TODAY | 2,400 | |||
| TCS7713-019938 | Hosiden Corporation | IN STOCK SHIP TODAY | 898 | |||
| TMD27713 | ams | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
| 77135-146-52 | AB Connectors Ltd | IN STOCK SHIP TODAY |
| 4 | ||
![]() DB Roberts | D2-517-713-190 | Southco | This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele | 0 | ||
| 497713 | Essentra Components | 0 | ||||
| 3077-13-632-A-7 | RAF Electronic Hardware | 0 | ||||
| 16SRRW037771381 | Essentra Components | SEALING AND RETAINING WASHER, | 0 | |||
![]() FDH Electronics | 77138-101LF | Amphenol Communications Solutions | Other Products RoHS : Compliant |
| 735 | |
| 200877-13 | AbelConn LLC | Connector MIL M | 140 | |||
| S4347-7713-34 | SOURIAU-SUNBANK | Backshells & Ac | 7 | |||
| RFI77-13 | Cinch Connectivity Solutions | RF / Coaxial | 2 | |||
| 500-0771-36 1 | Honda Tsushin Kogyo Co Ltd | Wire and Cable | 1 | |||
| M10-538677-138 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 1577134-4 | TE Connectivity | Connector Acc |
| 0 | ||
![]() Maritex | 77138-101LF | Amphenol Corporation | Rectangular Connector Contacts; 77138-101LF; AMPHENOL; Gold; Crimp; 26 AWG; 30 AWG |
| 203,303 | |
| 77138-001LF | Amphenol Corporation | Rectangular Connector Contacts; 77138-001LF; AMPHENOL; Gold; Crimp; 30 AWG; 26 AWG |
| 119,389 | ||
![]() Master Electronics | 1771370000 | Weidmüller Interface GmbH & Co. KG | Conn Earth Terminal 2 POS T DIN Rail RoHS : Compliant |
| 0 | |
| UZ7713 | Microchip Technology Inc | Voltage Regulator RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-177-135 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-177-138 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-177-131 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 047713-0028 | ITT Interconnect Solutions | CA06RX14S6S; MIL-DTL 5015 Series I; Circular RoHS : Compliant |
| 0 | ||
| 1771333 | Phoenix Contact | EASYPOE34X-PNC RoHS : Compliant |
| 0 | ||
| 1187713001 | TE Connectivity | 99M1121-18-0/9-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-177-131 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-05-05-F-D-377-137-TR | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-11-03-G-D-177-130-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-177-138 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-177-134 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-40-04-G-D-377-133 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| 87713-1006 | Molex | 1.27mm Pitch Serial ATA Host Receptacle Surface Mount Vertical Standard Height with 1.05mm Plastic Locating Peg 0.76µm Gold (Au) Selective Plating with Kapton Tape Tape on Reel Packaging 22 Circuits Lead-Free RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 09561617713 | HARTING Technology Group | D-Sub High Density Connectors 15P DSUB MALE HD STRAIGHT SOLDER PIN RoHS : Compliant |
| 50 | |
| 09563617713 | HARTING Technology Group | D SUB HD MA STR 44P PL3_4-40 NUT RoHS : Compliant |
| 50 | ||
| 09562617713 | HARTING Technology Group | D-Sub High Density Connectors D SUB HD MA STR 26P PL3 4-40 NUT RoHS : Compliant |
| 50 | ||
| 1771390000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZDU 6-2/2AN BL RoHS : Compliant |
| 50 | ||
| 09564617713 | HARTING Technology Group | D-Sub High Density Connectors D SUB HD MA STR 62P PL3 4-40 NUT RoHS : Compliant |
| 50 | ||
| 09652617713 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV ML SSDP STR 15P PL3 GC SLK 4-40 RoHS : Compliant |
| 50 | ||
| 09565617713 | HARTING Technology Group | D-Sub High Density Connectors D SUB HD MA STR 78P PL3 4-40 NUT RoHS : Compliant |
| 50 | ||
| 1771360000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZPE 6-2/3AN RoHS : Compliant |
| 50 | ||
| 1771370000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZPE 6-2/2AN RoHS : Compliant |
| 42 | ||
| 1771380000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZDU 6-2/2AN RoHS : Compliant |
| 15 | ||
| 1407713 | Phoenix Contact | Heavy Duty Power Connectors HC-EVO-B24PT-BWD-HH M32-PLRBK RoHS : Compliant |
| 15 | ||
| 09654617713 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV ML SSDP STR 37P PL3 GC SLK 4-40 RoHS : Compliant |
| 4 | ||
| 09653617713 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV ML SSDP STR 25P PL3 GC SLK 4-40 RoHS : Compliant |
| 0 | ||
| 1777138 | Phoenix Contact | Pluggable Terminal Blocks 8 Pos 5.08mm pitch Through Hole Header RoHS : Compliant |
| 0 | ||
| AXG97713 | Axiom Manufacturing | AXIOM 15FT CAT6 BENDNFLEX CAB (GRAY) |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9771-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel Over Copper, RF Cable Part Number: RG303HV, RF Cable Type: RG303HV, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 10KV Male to HN Male Right Angle Cable 36 Inch Length Using RG303HV Coax., Radio frequency assembly 10KV male to HN male right angle cable 36 inch length using RG303HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV male to HN male right angle cable 36 inch length using RG303HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10KV to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10KV cable connection on one end and right angle HN cable connection on the other. Our 10KV to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3C9771-36 can also be known as a 10KV plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. 10KV plug to HN plug cable assembly PE3C9771-36 is built with RG303HV which is a coax type. The Pasternack 10KV cable assembly is manufactured with 10KV to right angle HN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10KV male to HN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9771-36 can also be used in the other direction and will be right angle HN male to 10KV male cable assembly if the opposite connectivity is required. 10KV plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10KV to HN cable assembly for quick shipment worldwide. Variations of 10KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10KV male to HN male right angle cable 36 inch length using RG303HV coax. |
| 22 | |
| PE3MP5771-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 100 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 100 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 0024A0024-9X, RF Cable Type: 0024A0024-9X, RF Cable Impedance: 100 Ohm, Length, Max: 36 inches. 100 Ohm 3-Slot TRB Solder/Clamp Plug to Plug for 0024A0024-9X Shielded Twisted Pair (.149 O.D.) 36" Cable., Radio frequency assembly 100 Ohm 3-Slot TRB solder/clamp plug to plug for 0024A0024-9X shielded twisted pair (.149 O.D.) 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 100 Ohm 3-Slot TRB solder/clamp plug to plug for 0024A0024-9X shielded twisted pair (.149 O.D.) 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MP5771-36 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MP5771-36 is built with 0024A0024-9X which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 100 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 100 Ohm 3-Slot TRB solder/clamp plug to plug for 0024A0024-9X shielded twisted pair (.149 O.D.) 36" cable. |
| 19 | ||
| PE7713-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 1.25 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 2 Watt DC to 67 GHz. PE7713-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7713-6 fixed attenuator is available with a typical attenuation accuracy of 1.25 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7713-6 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7713-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7713-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1.5 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 2 Watt DC to 67 GHz. PE7713-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7713-20 fixed attenuator is available with a typical attenuation accuracy of 1.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7713-20 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7713-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7713-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 1.25 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 2 Watt DC to 67 GHz. PE7713-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7713-10 fixed attenuator is available with a typical attenuation accuracy of 1.25 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7713-10 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7713-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7713-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1.5 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 2 Watt DC to 67 GHz. PE7713-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7713-30 fixed attenuator is available with a typical attenuation accuracy of 1.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7713-30 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7713-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7713-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 2 dB, Attenuation Accuracy, Typ: 1.25 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 2 Watt DC to 67 GHz. PE7713-2 is a 2 dB fixed attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7713-2 fixed attenuator is available with a typical attenuation accuracy of 1.25 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 2 dB. The Pasternack PE7713-2 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7713-2 will ship the same business day as purchased from Pasternack’s production facility. This 2 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7713-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 1.25 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 2 Watt DC to 67 GHz. PE7713-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7713-3 fixed attenuator is available with a typical attenuation accuracy of 1.25 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7713-3 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7713-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE3W17713 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity TNC Female Cable Using RG316 Coax. PE3W17713 is a reverse polarity SMA male right angle to reverse polarity TNC female cable using RG316 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity TNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17713 SMA reverse polarity male right angle to TNC reverse polarity female cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C6771-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to Straight Cut Lead Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to straight cut lead cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable 36 inch length using RG316 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. PE3C6771-36 can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA plug to straight cut lead sexless cable assembly PE3C6771-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6771-36 can also be used in the other direction and will be straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to straight cut lead cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3C7713 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W07713 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Push-On SMP Male 2 Hole Flange to SMA Male Cable Using PE-SR405AL Coax. PE3W07713 is a SMP male 2 hole flange to SMA male cable using PE-SR405AL coax. This Pasternack SMP male 2 hole flange to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male SMP 2 hole flange to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W07713 SMP male 2 hole flange to SMA male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W06771-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to TNC Male Right Angle Low Loss Cable 36 Inch Length Using PE-C240 Coax., Radio frequency assembly N male to TNC male right angle low loss cable 36 inch length using PE-C240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 36 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle TNC cable connection on the other. Our low loss N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W06771-36 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W06771-36 is built with PE-C240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06771-36 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 36 inch length using PE-C240 coax. |
| 0 | ||
| PE3W08771-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Male Cable 36 Inch Length Using PE-P195 Coax., Radio frequency assembly SMA male right angle to SMA male cable 36 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 36 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08771-36 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W08771-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08771-36 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 36 inch length using PE-P195 coax. |
| 0 | ||
![]() TE Connectivity | 2377130-2 | TE Connectivity | EP II PLUG HOUSING, 2P, NON-GWT Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 2 Plug Housing With | Part Number: 2377130-2 | Internal Number: 2377130-2 | TE Connectivity RoHS : Compliant |
| 8,996 | |
| 2377130-4 | TE Connectivity | EP II plug housing, 4P, NON-GWT Number of Positions: 4 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 4 Plug Housing With | Part Number: 2377130-4 | Internal Number: 2377130-4 | TE Connectivity RoHS : Compliant |
| 5,500 | ||
| 1-2377130-0 | TE Connectivity | EP II plug housing, 10P, NON-GWT Number of Positions: 10 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 10 Plug Housing With | Part Number: 1-2377130-0 | Internal Number: 1-2377130-0 | TE Connectivity RoHS : Compliant |
| 2,280 | ||
| 2377130-6 | TE Connectivity | EP II plug housing, 6P, NON-GWT Number of Positions: 6 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 6 Plug Housing With | Part Number: 2377130-6 | Internal Number: 2377130-6 | TE Connectivity RoHS : Compliant |
| 158 | ||
| 2377130-8 | TE Connectivity | EP II plug housing, 8P, NON-GWT Number of Positions: 8 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 8 Plug Housing With | Part Number: 2377130-8 | Internal Number: 2377130-8 | TE Connectivity RoHS : Compliant |
| 101 | ||
| 2377130-9 | TE Connectivity | EP II plug housing, 9P, NON-GWT Number of Positions: 9 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 9 Plug Housing With | Part Number: 2377130-9 | Internal Number: 2377130-9 | TE Connectivity RoHS : Compliant |
| 98 | ||
| 1-2377130-2 | TE Connectivity | EP II plug housing, 12P, NON-GWT Number of Positions: 12 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 12 Plug Housing With | Part Number: 1-2377130-2 | Internal Number: 1-2377130-2 | TE Connectivity RoHS : Compliant |
| 52 | ||
| 5413771-3 | TE Connectivity | JACK BLKHD,COML BNC,HEX CRIMP RF Interface: BNC RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .572 in RF Connector Mated Outer Diameter (Approximate): 14.53 mm Impedance: 50 Ω BNC Jack .572" 14.53 mm | Coax Connector | Part Number: 5413771-3 | Internal Number: 5413771-3 | TE Connectivity RoHS : Compliant |
| 32 | ||
![]() Vyrian | 91-569771-35S | Amphenol Corporation | MIL Series Connector, 6 Contact(s), Female, Solder Terminal, Receptacle | 18,544 | ||
BA277,135![]() | NXP Semiconductors | Rectifier Diode, 1 Phase, 1 Element, 0.1A, 35V V(RRM) RoHS : Compliant | 11,691 | |||
AD7713ANZ![]() | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDIP24 RoHS : Compliant | 11,505 | |||
| MAXM17713AMB+T | Analog Devices Inc | Switching Regulator RoHS : Compliant | 9,915 | |||
AD7713ARZ![]() | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDSO24 RoHS : Compliant | 9,275 | |||
AD7713AR-REEL![]() | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDSO24 RoHS : Not Compliant | 8,950 | |||
AD7713AR-REEL7![]() | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDSO24 RoHS : Not Compliant | 8,567 | |||
| MAXM17713AMB+ | Analog Devices Inc | Switching Regulator RoHS : Compliant | 7,898 | |||
TPS77133QDGKQ1![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, PMOS, PDSO8 | 7,605 | |||
AD7713AN![]() | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDIP24 RoHS : Not Compliant | 7,146 | |||
| PT7713C | Texas Instruments | Switching Regulator, 20A, 400kHz Switching Freq-Max, Hybrid, MSMA27 | 6,247 | |||
AD7713AR![]() | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 3 Channel, Serial Access, CMOS, PDSO24 RoHS : Not Compliant | 5,543 | |||
TLC34077-135FN![]() | Texas Instruments | Palette DAC, CMOS, PQCC84 | 5,312 | |||
| CT447713 | Micron Technology, Inc | 4,982 | ||||
| PT7713N | Texas Instruments | Switching Regulator, 20A, 400kHz Switching Freq-Max, Hybrid, MSMA27 RoHS : Not Compliant | 4,099 | |||
![]() Win Source Electronics | 77138-101LF | Amphenol Corporation | CONN SOCKET 26-30AWG CRIMP GOLD / Socket Contact Gold 26-30 AWG Crimp |
| 67,080 | |
TPS77133DGKR![]() | Texas Instruments | IC REG LDO 3.3V 0.15A 8VSSOP RoHS : Compliant |
| 2,579 | ||
TPS77133DGK![]() | Texas Instruments | IC REG LDO 3.3V 0.15A 8VSSOP RoHS : Compliant |
| 2,240 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |