| Electronic Components Datasheet Search |
|
76-021 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 53376-0210 | Molex | Connector: wire-board; male; Automotive; PIN: 2; straight; tinned RoHS : Compliant |
| 17,751 | |
| 61-2760-21/0030 | Osterrath Gmbh & Co KG | Tip: ring; M3,5; crimped; for cable; non-insulated |
| 7,537 | ||
| 67.9760-21 | Stäubli Electrical Connectors | Laboratory connector: BNC; socket; black; crimped; Type: insulated RoHS : Compliant |
| 2,617 | ||
| 76021-0046 | Molex | Connector: DIN 41612; data |
| 272 | ||
| 214760-2123 | Molex | Connector: wire-wire; Micro-Fit 3.0; socket; female; data; PIN: 1 |
| 100 | ||
| 214760-2121 | Molex | Connector: wire-wire; socket; female; data; Inom: 8.5A; PIN: 1; 18AWG |
| 95 | ||
| 107602-108 | TE Connectivity | Connector: circular; Automotive |
| 1 | ||
| 00176021 | GSR | Tap: inch; UNEF 1/4"; right hand thread; 32; L: 56mm; initial; 4.9mm |
| 0 | ||
![]() Verical | 76021-0045 | Molex | Connector VHDM-H 8R 880 Signal RoHS : Compliant |
| 705 | |
| 76021-0045 | Molex | Connector VHDM-H 8R 880 Signal RoHS : Compliant |
| 490 | ||
| 76021-0046 | Molex | Backplane Connector RoHS : Compliant |
| 272 | ||
| 76021-0055 | Molex | 0 |
| 182 | ||
![]() Avnet Americas | 214760-2121 | Molex | Cable, UL 10002, Receptacle-Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 18 AWG, 75mm L, Tin, Red - Bulk (Alt: 77AH5530) RoHS : Not Compliant |
| 0 | |
| 171976-0214 | Molex | - Rail/Tube (Alt: 1719760214) RoHS : Compliant |
| 0 | ||
| STK760-211A-E | onsemi | - Rail/Tube (Alt: STK760-211A-E) RoHS : Compliant | 0 | |||
| STK760-211C-E | onsemi | - Rail/Tube (Alt: STK760-211C-E) RoHS : Compliant | 0 | |||
| R176021000 | Radiall | - Bulk (Alt: R176021000) RoHS : Compliant |
| 0 | ||
| 27-60-2121 | Molex | - Bulk (Alt: 0027602121) RoHS : Compliant |
| 0 | ||
| 171976-0217 | Molex | - Rail/Tube (Alt: 1719760217) RoHS : Compliant |
| 0 | ||
| 171976-0216 | Molex | - Rail/Tube (Alt: 1719760216) RoHS : Compliant |
| 0 | ||
| 171976-0218 | Molex | - Rail/Tube (Alt: 1719760218) RoHS : Compliant |
| 0 | ||
| 53376-0210 | Molex | - Bulk (Alt: 0533760210) RoHS : Compliant |
| 0 | ||
| 73276-0210 | Molex | - Bulk (Alt: 0732760210) RoHS : Compliant |
| 0 | ||
| 214760-2122 | Molex | Cable, UL 10002, Receptacle-Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 18 AWG, 150mm L, Tin, Red - Bulk (Alt: 2147602122) RoHS : Compliant |
| 0 | ||
| 214760-2121 | Molex | Cable, UL 10002, Receptacle-Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 18 AWG, 75mm L, Tin, Red - Bulk (Alt: 2147602121) RoHS : Compliant |
| 0 | ||
| 10157376-02101LF | Amphenol Corporation | 1.0MM PITCH, HEADER, VER-TICAL, GOLD FLASH PLATIN - Tape and Reel (Alt: 10157376-02101LF) RoHS : Not Compliant |
| 0 | ||
| 214760-2125 | Molex | Cable, UL 10002, Receptacle-Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 18 AWG, 450mm L, Tin, Red - Bulk (Alt: 2147602125) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 0217002.HXP | Littelfuse Inc | Cartridge Fuses 250 V 2A 5x20mm Fast Acting RoHS : Compliant |
| 80,040 | |
| 0215004.MXP | Littelfuse Inc | Cartridge Fuses 250V 4A Slo-Blo RoHS : Compliant |
| 36,565 | ||
| 0218005.HXP | Littelfuse Inc | Cartridge Fuses 250V 5A Time Lag (Slo-Blo) RoHS : Compliant |
| 30,035 | ||
| 0218004.MXP | Littelfuse Inc | Cartridge Fuses 250V 4A Time Lag (Slo-Blo) RoHS : Compliant |
| 23,105 | ||
| 0215002.MXP | Littelfuse Inc | Cartridge Fuses 250V 2A Slo-Blo RoHS : Compliant |
| 22,523 | ||
| 021806.3MXP | Littelfuse Inc | Cartridge Fuses 250V 6.3A Time Lag (Slo-Blo) RoHS : Compliant |
| 21,803 | ||
| 0218001.MXP | Littelfuse Inc | Cartridge Fuses 250V 1A Time Lag (Slo-Blo) RoHS : Compliant |
| 20,121 | ||
| 02153.15HXP | Littelfuse Inc | Cartridge Fuses 250V 3.15A Slo-Blo RoHS : Compliant |
| 17,340 | ||
| 0216002.MXP | Littelfuse Inc | Cartridge Fuses 250V 2A Fast Acting RoHS : Compliant |
| 15,206 | ||
| 0218010.HXP | Littelfuse Inc | Cartridge Fuses 250V 10A Time Lag (Slo-Blo) RoHS : Compliant |
| 14,202 | ||
| 0215004.MXEP | Littelfuse Inc | Cartridge Fuses 250V 4A Slo-Blo RoHS : Compliant |
| 9,273 | ||
| PE7602-10 | Pasternack Enterprises | Attenuators - Interconnects 10dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel |
| 76 | ||
| 76021 | Wiha Quality Tools | Screwdrivers, Nut Drivers & Socket Drivers Hex Power Blade 1/4" RoHS : Not Applicable |
| 50 | ||
| 76021 BK002 | Alpha Wire | Multi-Conductor Cables Cat 5e Industrial Ethernet 24 AWG 4PR Conductor, Foil, 500ft Black RoHS : Compliant |
| 0 | ||
| 76021 BK001 | Alpha Wire | Multi-Conductor Cables Cat 5e Industrial Ethernet 24 AWG 4PR Conductor, Foil, 1000ft Black RoHS : Compliant |
| 0 | ||
![]() Newark | 744760210A | Wurth Elektronik | Wirewound Inductor, 100Nh, 0.5A, 0805; |Würth Elektronik 744760210A RoHS : Compliant |
| 9,034 | |
| 744760210A | Wurth Elektronik | Wirewound Inductor, 100Nh, 0.5A, 0805; |Würth Elektronik 744760210A RoHS : Compliant |
| 9,034 | ||
| 214760-2125 | Molex | Cable Assy, Crimp Skt-Skt, 450Mm; |Molex 214760-2125 RoHS : Compliant |
| 2,559 | ||
| 214760-2121 | Molex | Cable Assy, Crimp Skt-Skt, Red, 3"; Connector To Connector:Crimp Terminal Socket To Crimp Terminal Socket; Cable Length - Imperial:3"; Cable Length - Metric:75Mm; Product Range:Micro-Fit 3.0 Ots 214760 Series; Jacket Color:Red Rohs Compliant: Yes RoHS : Compliant |
| 2,499 | ||
| 214760-2122 | Molex | Cable Assy, Crimp Skt-Skt, Red, 5.9"; Connector To Connector:Crimp Terminal Socket To Crimp Terminal Socket; Cable Length - Imperial:5.9"; Cable Length - Metric:150Mm; Product Range:Micro-Fit 3.0 Ots 214760 Series; Jacket Color:Red Rohs Compliant: Yes RoHS : Compliant |
| 1,725 | ||
| 214760-2125 | Molex | Cable Assy, Crimp Skt-Skt, Red, 17.7"; Connector To Connector:Crimp Terminal Socket To Crimp Terminal Socket; Cable Length - Imperial:17.7"; Cable Length - Metric:450Mm; Product Range:Micro-Fit 3.0 Ots 214760 Series; Jacket Color:Redrohs Compliant: Yes RoHS : Compliant |
| 1,210 | ||
| 67.9760-21 | Stäubli Electrical Connectors | Conn Rf/Coax, Bnc Coaxial, Straight Plug; |Staubli 67.9760-21 RoHS : Compliant |
| 1,162 | ||
| 744760212A | Wurth Elektronik | Wirewound Inductor, 120Nh, 0.5A, 0805; |Würth Elektronik 744760212A RoHS : Compliant |
| 352 | ||
| 744760212A | Wurth Elektronik | Wirewound Inductor, 120Nh, 0.5A, 0805; |Würth Elektronik 744760212A RoHS : Compliant |
| 352 | ||
| 744760215A | Wurth Elektronik | Wirewound Inductor, 150Nh, 0.4A, 0805; |Würth Elektronik 744760215A RoHS : Compliant |
| 162 | ||
| 744760215A | Wurth Elektronik | Wirewound Inductor, 150Nh, 0.4A, 0805; |Würth Elektronik 744760215A RoHS : Compliant |
| 162 | ||
| ZW-22-13-G-S-760-210 | Samtec Inc | Conn Stack Brd, 2.54Mm, 22Pos, Hdr; |Samtec, Inc. ZW-22-13-G-S-760-210 RoHS : Compliant |
| 117 | ||
| 207602-1 | TE Connectivity | Strain Relief Kit, 12Way, Thermoplastic; |Te Connectivity Amp 207602-1 RoHS : Compliant |
| 34 | ||
| 76-021 | SPC Multicomp | 4Mm Banana Plug-Plug, Blk, 1.5M; |Multicomp Pro 76-021 (Alternate Part Number: 3760122595668 RoHS : Compliant |
| 19 | ||
| Z5.507.6021.0 | Wieland Electric GmbH | Cable Gland Sr.m25X1,5 |Wieland Electric Z5.507.6021.0 RoHS : Not Compliant |
| 0 | ||
![]() RS | 3760-2# (1930210) | Pomona Electronics | BINDING POST, TIN PLT, BULK (RED) |
| 276 | |
| 22-28-7060 (42376-0216) | Molex | KK 254 HEADER RA 6 CIRCUIT TIN MATING PIN LENGTH 9.17MM W/ KINKED PC TAILS |
| 80 | ||
| 3760-2 (1930205) | Pomona Electronics | BINDING POST STANDARD BINDING POST 15A 2500 V (RMS) (MAX.) POLYCARBONATE |
| 51 | ||
| 1.30.076.021/0000 | RAFI GmbH & Co Kg | KEYLOCK SWITCH ACTUATOR, RAFIX 16,ROUND,1X90,L-SHAPE, KEY REMOVE 0,LATCHING RoHS : Compliant |
| 8 | ||
| 4176-02 (1925282) | Pomona Electronics | 2 PIECE MINIGRABBER SET 1 RED 1 BLACK 1 RED 30VAC/60VDC 5A |
| 3 | ||
| 76021 | Wiha Quality Tools | Hex Power Blade Bit, 1/4- Inch |
| 0 | ||
| 376021 | Burkert Fluid Control Systems | SOLENOID VALVE, 7011-A02,0AAVAGM81-3A-230/50-04-GB, 7011 SERIES |
| 0 | ||
| 1707602-1 | TE Connectivity | ANVIL |
| 0 | ||
| 27-60-2121 | Molex | KK 156 Hdr Assy Tin 12 Ckt RoHS : Compliant |
| 0 | ||
| 76021-R118 | Ohmite Mfg Co | 5 RoHS : Compliant |
| 0 | ||
| FMAT7602-15 | Fairview Microwave Inc | 15dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel |
| 0 | ||
| FMAT7602-10 | Fairview Microwave Inc | 10dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel |
| 0 | ||
| 76021 BK002 | Alpha Wire | INDUSTRIAL ETHERNET CABLE, 76021 BLACK 500 FT, XGIE 4PR STRANDEDFSHIELD |
| 0 | ||
| INO-6176-02-14 | SMC Corporation of America | VACUUM TEST KIT, ZP SERIES |
| 0 | ||
| 8MGT-1760-21 | Gates | POLY CHAIN BELT;GT 8MM SECTION, POLY CHAIN GT CARBON SERIES |
| 0 | ||
![]() Onlinecomponents.com | 76021 | Wiha Quality Tools | PROFESSIONAL BIT HEX 1/4 X RoHS : Compliant |
| 0 | |
| 76021 | Brady Worldwide Inc | B120 14X20 BLU/WHT NOTICE RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | STK760-211A-E | onsemi | Power Factor Correction Average Current 17V 12-SIP RoHS : Compliant |
| 2,659 | |
| STK760-211C-E | onsemi | Power Factor Correction Average Current 17V 12-SIP RoHS : Compliant |
| 29,443 | ||
| STK760-213-E | onsemi | Power Factor Correction Average Current 17V 16-SIP Tray RoHS : Compliant |
| 23,000 | ||
| STK760-213AC-E | onsemi | Controller Air Conditioners 22-SIP RoHS : Compliant |
| 60 | ||
| STK760-211-E | onsemi | Power Factor Correction Average Current 17V 12-SIP RoHS : Compliant |
| 12,031 | ||
| STK760-211-E | SANYO Semiconductor Co Ltd | Power Factor Correction Average Current 17V 12-SIP RoHS : Compliant |
| 3,409 | ||
| STK760-211A-E | SANYO Semiconductor Co Ltd | Power Factor Correction Average Current 17V 12-SIP RoHS : Compliant |
| 175 | ||
| STK760-213-E | SANYO Semiconductor Co Ltd | Power Factor Correction Average Current 17V 16-SIP Tray RoHS : Compliant |
| 240 | ||
| STK760-213AC-E | SANYO Semiconductor Co Ltd | Controller Air Conditioners 22-SIP RoHS : Compliant |
| 105 | ||
![]() Sager | 0760210048 | Molex | Molex | 0 | ||
| 9757602118 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9857602104 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9757602116 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9757602161 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9857602139 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 2147602122 | Molex | Specialized Cables MICROFIT 3.0 F-F 150MM 18 RoHS : Compliant |
| 0 | ||
| 1707602-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL, AMPLIVAR SPLICE |
| 0 | ||
| 1719760217 | Molex | SL LCP RTAN HDR ASY SMT 30AU 17 CKT |
| 0 | ||
| 0027602121 | Molex | Headers & Wire Housings KK 156 Hdr Assy Tin 12 Ckt |
| 0 | ||
| ZW-25-13-G-D-760-210 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 9757602159 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9857602113 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9757602121 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9797602170 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Interstate Connecting Components | 15-97-6021 | Molex | MINIFIT TPA PLUG HSG V-0 BLK CKT RoHS : Compliant |
| 935 | |
| 207602-1 | TE Connectivity | METRIMATE,STR REL KIT,12P RoHS : Compliant |
| 44 | ||
| 1707602-1 | TE Connectivity |
| 0 | |||
| 227602-1 | TE Connectivity | MULTI COAX MICRO MIN PIN RoHS : Compliant |
| 0 | ||
| 58-760219-08P | Amphenol Industrial Operations | CONN PLUG | 0 | |||
| 10157376-02101LF | Amphenol FCi | 1.0MM PITCH, HEADER, VER-TICAL | 0 | |||
| 10157576-021011LF | Amphenol FCi | FITMATE 2.0, HEADER, RIG-HT AN | 0 | |||
![]() Powell Electronics | ZW-22-13-G-S-760-210 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 77 | |
| 227602-1 | TE Connectivity | RF Interconnects RoHS : Compliant |
| 1 | ||
| 107602-108 | TE Connectivity | DEUTSCH CONNECTOR 107602-108 |
| 1 | ||
![]() Chip 1 Exchange | 744760218A | INSTOCK | 1,067 | |||
![]() Avnet Abacus | 1776021 | Phoenix Contact | LPTA 25 650BKLCBKBDWH54 LPTA25650BKLCBKBDWH54 (Alt: 1776021) RoHS : Compliant | 0 | ||
| 207602-1 | TE Connectivity | Connector Accessories Strain Relief Kit 12 POS Thermoplastic Red 600VAC (Alt: 207602-1) RoHS : Compliant | 0 | |||
| 207602-1 | TE Connectivity | Connector Accessories Strain Relief Kit 12 POS Thermoplastic Red 600VAC (Alt: 207602-1) RoHS : Compliant | 0 | |||
| 227602-1 | TE Connectivity | (Alt: 227602-1) RoHS : Compliant | 0 | |||
| 14576021 | nVent Schroff | Desktop Case IP20 2U 266mm Depth (Alt: 14576021) RoHS : Compliant | 0 | |||
| 534760210 | Molex | (Alt: 534760210) RoHS : Compliant | 0 | |||
| 2147602124 | Molex | (Alt: 2147602124) RoHS : Compliant | 0 | |||
| 1-967602-1 | TE Connectivity | Conn Shrouded Header HDR 10 POS 5mm Solder RA ThruHole (Alt: 1-967602-1) RoHS : Compliant | 0 | |||
| 1-967602-1 | TE Connectivity | Conn Shrouded Header HDR 10 POS 5mm Solder RA ThruHole (Alt: 1-967602-1) RoHS : Compliant | 0 | |||
| 876021-000 | TE Connectivity | (Alt: 876021-000) RoHS : Not Compliant | 0 | |||
| 3-1437602-1 | TE Connectivity | Switch Access Pushwheel Switch Spacer (Alt: 3-1437602-1) RoHS : Compliant | 0 | |||
| 2-1437602-1 | TE Connectivity | (Alt: 2-1437602-1) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 07-60213 | Fuji Polymer Industries Co | IN STOCK SHIP TODAY | 99 | ||
| 591-7602-102 | Dialight | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 14 | ||
![]() DB Roberts | 47-60-212-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | ||
| 47-60-210-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-210-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-210-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-210-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-212-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-212-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-210-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-212-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-60-212-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() Master Electronics | 207602-1 | TE Connectivity | METRIMATE STR REL KIT 12P RoHS : Compliant |
| 250 | |
| 131-176-021 | TE Connectivity | 131-176-021=TAB 071X025 STDSMZ MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1707602-1 | TE Connectivity | ANVIL MOQ Reduction RoHS : Compliant |
| 0 | ||
| ZW-25-13-G-D-760-210 | Samtec Inc | Conn Board Stacker HDR 50 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 121576-0214 | ITT Interconnect Solutions | Circular Connector - Cable Mount - Contact Arangement: 20-15 - Sockets - Bayonet Coupling - Adapter for PG RoHS : Compliant |
| 0 | ||
| 217602-1 | TE Connectivity | ANVIL BOARD SUPPORT RoHS : Compliant |
| 0 | ||
| 76021-0046 | Molex | Molex 76021-0046 High Speed / Modular Connectors Vhdm-H Dcard 8Row RoHS : Compliant |
| 0 | ||
| 76021-0055 | Molex | 76021-0055 Molex RoHS : Compliant |
| 0 | ||
| 121576-0213 | ITT Interconnect Solutions | Circular Connector - Cable Mount - Contact Arangement: 20-15 - Pins - Bayonet Coupling - Adapter for PG RoHS : Compliant |
| 0 | ||
| 09760-210 | OMRON Industrial Automation | OutArm Assy Qtr 800HS RoHS : Compliant |
| 0 | ||
| 121576-0215 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arangement: 20-15 - Pins - Bayonet Coupling - Adapter for PG RoHS : Compliant |
| 0 | ||
| 121576-0210 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arangement: 20-19 - Sockets - Bayonet Coupling - Adapter for PG RoHS : Compliant |
| 0 | ||
| 76021-0045 | Molex | 8 Row VHDM H-Series Dcard Assy LF 8 Row VHDM H-Se. RoHS : Compliant |
| 0 | ||
| ZE7602-10 | Thomas & Betts | CHNL TO BEAM CLAMP STL RoHS : Compliant |
| 0 | ||
| 53376-0210 | Molex | Conn Shrouded Header (4 Sides) HDR 2 POS 2.5mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 17602 10 B1 | Volex Group | AC Power Cords 16AWG PLUG-SJTS 6FT 7IN (2.0m) BLACK |
| 29 | |
| 1.30.076.021/0000 | RAFI GmbH & Co Kg | Keylock Switch Actuator,RAFIX 16,Round,1x90,L-Shape,Key Remove 0,Latching RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE7602-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7602-10 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 59 | |
| PE3W07602-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 39.37 inches. 75 Ohm Mini SMB Plug Right Angle to 75 Ohm F Female Bulkhead Cable 100 cm Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 100 cm length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 100 cm length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMB cable connection on one end and type F bulkhead cable connection on the other. Our right angle mini SMB to type F cable assemblies have a plug gender on end 1 and female on end 2. This mini SMB to type F cable is a plug to female coax assembly, PE3W07602-100CM, can also be known as a right angle mini SMB male to type F jack cable assembly and will be shipped same-day as it is purchased. Mini SMB male to F type jack cable assembly PE3W07602-100CM is built with RG187 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with right angle mini SMB to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this mini SMB right angle plug to F type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07602-100CM can also be used in the other direction and will be type F female bulkhead to right angle mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB right angle male to F type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to type F cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 100 cm length using 75 Ohm RG187 coax. |
| 45 | ||
| PE3W07602-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm Mini SMB Plug Right Angle to 75 Ohm F Female Bulkhead Cable 12 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 12 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 12 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMB cable connection on one end and type F bulkhead cable connection on the other. Our right angle mini SMB to F type cable assemblies have a plug gender on end 1 and female on end 2. This mini SMB to type F cable is a plug to female coax assembly, PE3W07602-12, can also be known as a right angle mini SMB male to F type jack cable assembly and will be shipped same-day as it is purchased. Mini SMB male to type F jack cable assembly PE3W07602-12 is built with RG187 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with right angle mini SMB to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this mini SMB right angle plug to type F female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07602-12 can also be used in the other direction and will be type F female bulkhead to right angle mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB right angle male to F type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to type F cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 12 inch length using 75 Ohm RG187 coax. |
| 45 | ||
| PE3W07602-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 59.05 inches. 75 Ohm Mini SMB Plug Right Angle to 75 Ohm F Female Bulkhead Cable 150 cm Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 150 cm length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 150 cm length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMB cable connection on one end and type F bulkhead cable connection on the other. Our right angle mini SMB to F type cable assemblies have a plug gender on end 1 and female on end 2. This mini SMB to type F cable is a plug to female coax assembly, PE3W07602-150CM, can also be known as a right angle mini SMB male to F type jack cable assembly and will be shipped same-day as it is purchased. Mini SMB male to type F jack cable assembly PE3W07602-150CM is built with RG187 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with right angle mini SMB to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this mini SMB right angle plug to type F female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07602-150CM can also be used in the other direction and will be type F female bulkhead to right angle mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB right angle male to type F jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to type F cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug right angle to 75 Ohm F female bulkhead cable 150 cm length using 75 Ohm RG187 coax. |
| 38 | ||
| PE7602-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 1 dB. The Pasternack PE7602-1 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 11 | ||
| PE3C7602-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMB Plug to SSMA Male Cable 100 cm Length Using RG178 Coax., Radio frequency assembly SMB plug to SSMA male cable 100 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SSMA male cable 100 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SSMA cable connection on the other. Our SMB to SSMA cable assemblies have a plug gender on end 1 and male on end 2. This SMB to SSMA cable is a plug to male coax assembly, PE3C7602-100CM, can also be known as a SMB male to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SSMA plug cable assembly PE3C7602-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7602-100CM can also be used in the other direction and will be SSMA male to SMB plug cable assembly if the opposite connectivity is required. SMB male to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SSMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SSMA male cable 100 cm length using RG178 coax. |
| 7 | ||
| PE3C7602-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMB Plug to SSMA Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMB plug to SSMA male cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SSMA male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SSMA cable connection on the other. Our SMB to SSMA cable assemblies have a plug gender on end 1 and male on end 2. This SMB to SSMA cable is a plug to male coax assembly, PE3C7602-12, can also be known as a SMB male to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SSMA plug cable assembly PE3C7602-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7602-12 can also be used in the other direction and will be SSMA male to SMB plug cable assembly if the opposite connectivity is required. SMB male to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SSMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SSMA male cable 12 inch length using RG178 coax. |
| 7 | ||
| PE3C7602-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMB Plug to SSMA Male Cable 150 cm Length Using RG178 Coax., Radio frequency assembly SMB plug to SSMA male cable 150 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SSMA male cable 150 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SSMA cable connection on the other. Our SMB to SSMA cable assemblies have a plug gender on end 1 and male on end 2. This SMB to SSMA cable is a plug to male coax assembly, PE3C7602-150CM, can also be known as a SMB male to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SSMA plug cable assembly PE3C7602-150CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7602-150CM can also be used in the other direction and will be SSMA male to SMB plug cable assembly if the opposite connectivity is required. SMB male to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SSMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SSMA male cable 150 cm length using RG178 coax. |
| 7 | ||
| PE7602-15 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 15 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 15dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-15 is a fixed 15 dB attenuator from Pasternack. This 15 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 15 dB. The Pasternack PE7602-15 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-15 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 15 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7602-12 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 12 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 12dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-12 is a fixed 12 dB attenuator from Pasternack. This 12 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 12 dB. The Pasternack PE7602-12 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-12 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 12 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 4 | ||
![]() Vyrian | SN76021ND | Texas Instruments | Audio Amplifier, 1 Func, Bipolar, PDIP20 RoHS : Not Compliant | 9,610 | ||
| 1760213 | Phoenix Contact | Barrier Strip Terminal Block, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,820 | |||
| STK760-213AC-E | onsemi | Analog Circuit, 1 Func, Hybrid RoHS : Compliant | 8,455 | |||
| TMDX3760216 | Texas Instruments | 8,064 | ||||
| KTS7602/1G | Kingston Technology Company | 4,026 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |