 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
7333 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | 7333 | Visual Communications Company | RoHS : Compliant |
| 1,000 | |
| 73334-111LF | Amphenol FCi | RJ45 Modular Jack Connector - 6p6c (RJ11 RJ12 RJ14 RJ25) - Up Direction - Solder Termination - 90° Angle (Right) - Surface Mount. RoHS : Compliant |
| 920 | ||
| 507-4857-3332-500F | Dialight | 5V DC GREEN SHORT CYLINDRICAL LED INDICATOR RoHS : Compliant |
| 385 | ||
| 507-4757-3331-500F | Dialight | 5V DC RED SHORT CYLINDRICAL LED INDICATOR RoHS : Compliant |
| 250 | ||
| 7333 | JKL Components Corporation | T-1 3/4 Flanged Midget Lamp RoHS : Compliant |
| 8 | ||
| DRQ73-331-R | Eaton Bussmann | Inductor Power Shielded Drum Core 325.5uH/1302uH 20% 100KHz Ferrite 420mA/211mA 1.59Ohm/6.36Ohm DCR T/R RoHS : Compliant |
| 0 | ||
| 73-338-0 | Mode Electronics | Quick Connect Terminal 18-22AWG 21.5mm 7.4mm RoHS : Compliant |
| 0 | ||
| ZW-05-19-L-D-787-333 | Samtec Inc | Conn Board Stacker HDR 10 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 121073-3329-D | ITT Interconnect Solutions | Conn D-Subminiature SKT 50 POS 2.77mm Solder Pot ST Cable Mount 50 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 037333-0003 | ITT Interconnect Solutions | Conn Circular PIN 4 POS Solder ST Cable Mount 4 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| 73333-111LF | Amphenol FCi | Modular Conn/Ethernet Conn MJ HOR ESMT 8/8 H/I RoHS : Compliant |
| 0 | ||
| 3273336 | Phoenix Contact | Distribution block - Basic terminal block with supply - The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges - see accessories - nom. voltage: 450 V - nominal current: 24 A - connection method: Push-in connection - Push-in connection - number of connections: 7 - cross section: 0.14 mm² - 4 mm² - AWG: 26 - 12 - width: 25.6 mm - height: 21.7 mm - color: yellow - mounting type: for snapping onto a DIN rail adapter - Adapter plate RoHS : Compliant |
| 0 | ||
| 097333-0001 | ITT Interconnect Solutions | MJS-8SH2; Micros; Micro RoHS : Compliant |
| 0 | ||
| 097333-0038 | ITT Interconnect Solutions | Conn Unshrouded Header SKT 10 POS 2.54mm ST Cable Mount RoHS : Compliant |
| 0 | ||
| 097333-0039 | ITT Interconnect Solutions | Conn Unshrouded Header SKT 10 POS 2.54mm ST Cable Mount RoHS : Compliant |
| 0 | ||
 Verical | 7333 | Keystone Electronics Corp | Lug Terminal Brass 22.3mm Tin RoHS : Compliant |
| 5,000 | |
| 733-332 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 2 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 2,250 | ||
| 7333 | Visual Communications Company | T-1 3/4 Miniature Flange Clear Incandescent Lamp RoHS : Compliant |
| 1,000 | ||
| 733-366 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 455 | ||
| 733-334 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 320 | ||
| 733-366 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-334 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-335 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-340 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 10 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 197 | ||
| 7333 | Visual Communications Company | T-1 3/4 Miniature Flange Clear Incandescent Lamp RoHS : Compliant |
| 189 | ||
| 733-340 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 10 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 176 | ||
| 733-334 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 125 | ||
| 733-335 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 105 | ||
| 733-340 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 10 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 80 | ||
| 733-335 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 40 | ||
 Avnet Americas | AP7333-33SRG-7 | Diodes Incorporated | LDO Regulator Pos 3.3V 0.3A 3-Pin SOT-23R T/R - Tape and Reel (Alt: AP7333-33SRG-7) RoHS : Compliant |
| 42,000 | |
| PNP5WVJT-73-330R | YAGEO Corporation | Through Hole Resistor, 330 Ohm, PNP V Series, 5 W, ? 5%, Axial Leaded, 300 V, Wirewound, ? 300ppm/?C - Boxed Product (Development Kits) (Alt: PNP5WVJT-73-330R) RoHS : Compliant |
| 0 | ||
| MMASU105SB7333MFCA01 | TAIYO YUDEN | MLCC, 0402, 50V, X7R, 0.033UF 20%, T&R - Tape and Reel (Alt: MMASU105SB7333MFCA01) RoHS : Compliant |
| 0 | ||
| RSF5SSJT-73-330K | YAGEO Corporation | Through Hole Resistor, 330 kOhm, RSF Series, 5 W, ? 5%, Axial Leaded, 500 V, Metal Oxide Film - Boxed Product (Development Kits) (Alt: RSF5SSJT-73-330K) RoHS : Compliant |
| 0 | ||
| SCREENING CHG/019-007333 REVB | Sensitron Semiconductors | - Bulk (Alt: SCREENING CHG/019-007333 REVB) RoHS : Not Compliant | 0 | |||
| SIT1408BI-73-33N-25.000000G | SiTime Corporation | OSCILLATOR, SIT1408, -40 to 85C, 2016, 50ppm, 3.3V, 25MHz, OE, 250 pcs T&R 8 mm - Tape and Reel (Alt: SIT1408BI-73-33N-25.000000G) RoHS : Compliant |
| 0 | ||
| SIT1418BEB73-33N-58.982400D | SiTime Corporation | OSCILLATOR, SIT1418, -40 to 105C, 2016, 50ppm, 3.3V, 58.9824MHz, NC, B Dr Str, 3k pcs T&R 8 mm - Tape and Reel (Alt: SIT1418BEB73-33N-58.982400D) RoHS : Compliant |
| 0 | ||
| SIT1424BA-73-33N-9.800000G | SiTime Corporation | OSCILLATOR, SIT1424, -40 to 125C, 2016, 50ppm, 3.3V, 9.8MHz, OE, Default, 250 pcs T&R 8 mm - Tape and Reel (Alt: SIT1424BA-73-33N-9.800000G) RoHS : Compliant |
| 0 | ||
| SIT1424BA-73-33N-9.830000D | SiTime Corporation | OSCILLATOR, SIT1424, -40 to 125C, 2016, 50ppm, 3.3V, 9.83MHz, OE, Default, 3k pcs T&R 8 mm - Tape and Reel (Alt: SIT1424BA-73-33N-9.830000D) RoHS : Compliant |
| 0 | ||
| SIT1424BE-73-33N-12.000000G | SiTime Corporation | OSCILLATOR, SIT1424, -40 to 105C, 2016, 50ppm, Default Dr Str, 3.3V, 12MHz, OE, 250 pcs T&R 8 mm - Tape and Reel (Alt: SIT1424BE-73-33N-12.000000G) RoHS : Compliant |
| 0 | ||
| SIT1424BE-73-33N-25.000000E | SiTime Corporation | OSCILLATOR, SIT1424, -40 to 105C, 2016, 50ppm, Default Dr Str, 3.3V, 25MHz, OE, T&R - Tape and Reel (Alt: SIT1424BE-73-33N-25.000000E) RoHS : Compliant |
| 0 | ||
| SIT1424BI-73-33N-30.000000Y | SiTime Corporation | OSCILLATOR, SIT1424, -40 to 85C, 2016, 50ppm, 3.3V, 30MHz, OE, Default - Tape and Reel (Alt: SIT1424BI-73-33N-30.000000Y) RoHS : Compliant |
| 0 | ||
| SIT1602AI-73-33E-24.000000D | SiTime Corporation | - Tape and Reel (Alt: SIT1602AI-73-33E-24.000000D) RoHS : Compliant |
| 0 | ||
SIT1602BC-73-33E-33.333300E | SiTime Corporation | - Tape and Reel (Alt: SIT1602BC-73-33E-33.333300E) RoHS : Compliant |
| 0 | ||
| SIT1602BC-73-33N-4.000000D | SiTime Corporation | Silicon Oscillator 4MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-73-33N-4.000000D) RoHS : Compliant |
| 0 | ||
 Arrow Electronics | 733-332 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 2 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 2,252 | |
| 733-336 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 1,009 | ||
| 733-366 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 456 | ||
| 733-334 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 324 | ||
| 733-366 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-334 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-335 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-332 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 2 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 200 | ||
| 733-340 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 10 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 197 | ||
| 7333 | Visual Communications Company | T-1 3/4 Miniature Flange Clear Incandescent Lamp RoHS : Compliant |
| 189 | ||
| 733-340 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 10 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 178 | ||
| 733-335 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Top Entry Thru-Hole Box RoHS : Compliant |
| 111 | ||
| 733-364 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 82 | ||
| 733-364 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 5 | ||
| 733-366 | WAGO Innovative Connections | Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder RA Side Entry Thru-Hole Box RoHS : Compliant |
| 2 | ||
 Newark | HT7333S | SPC Multicomp | Ldo, Fixed, 3.3V, 0.3A, Sot-23-3; |Multicomp Pro HT7333S RoHS : Compliant |
| 2,917 | |
| HT7333S | SPC Multicomp | Ldo, Fixed, 3.3V, 0.3A, Sot-23-3; |Multicomp Pro HT7333S RoHS : Compliant |
| 2,917 | ||
| AP7333-28SAG-7 | Diodes Incorporated | Ldo, Fixed, 2.8V, 0.3A, -40 To 85Deg C; |Diodes Inc. AP7333-28SAG-7 RoHS : Compliant |
| 2,834 | ||
| AP7333-28SAG-7 | Diodes Incorporated | Ldo, Fixed, 2.8V, 0.3A, -40 To 85Deg C; |Diodes Inc. AP7333-28SAG-7 RoHS : Compliant |
| 2,834 | ||
| B32652A7333J000 | TDK Corporation | Cap, 0.033?f, 1.25 Kv, 5%, Pp; |Tdk B32652A7333J000 RoHS : Compliant |
| 2,310 | ||
| AP7333-18SRG-7 | Diodes Incorporated | Ldo, Fixed, 1.8V, 0.3A, -40 To 85Deg C; |Diodes Inc. AP7333-18SRG-7 RoHS : Compliant |
| 2,275 | ||
| AP7333-18SRG-7 | Diodes Incorporated | Ldo, Fixed, 1.8V, 0.3A, -40 To 85Deg C; |Diodes Inc. AP7333-18SRG-7 RoHS : Compliant |
| 2,275 | ||
| CRF250JT-73-330RUL | Vitrohm Portuguesa LDA | Res, 330R, 2.5W, Wirewound, Axial Lead; |Vitrohm CRF250JT-73-330RUL RoHS : Compliant |
| 897 | ||
| CRF250JT-73-330RUL | Vitrohm Portuguesa LDA | Res, 330R, 2.5W, Wirewound, Axial Lead; |Vitrohm CRF250JT-73-330RUL RoHS : Compliant |
| 897 | ||
| 507-4857-3332-500F | Dialight | Panel Indicator, Green, 7.14Mm, 5Vdc; Available Until Stocks Are Exhausted |Dialight 507-4857-3332-500F RoHS : Compliant |
| 219 | ||
| 507-4757-3331-500F | Dialight | Panel Indicator, Red, 7.14Mm, 5Vdc; |Dialight 507-4757-3331-500F RoHS : Compliant |
| 91 | ||
| 3273336 | Phoenix Contact | Tb, Power Distribution, 7Pole, 12 Awg; |Phoenix Contact 3273336 RoHS : Compliant |
| 14 | ||
| 173337 | Brady Worldwide Inc | Self-Laminating Vinyl Wrap Around Labels; |Brady 173337 RoHS : Compliant |
| 3 | ||
| 7333 | Visual Communications Company | Incandescent Lamp, 5V, Midget Flange; |Vcc/visual Communications Company 7333 RoHS : Compliant |
| 0 | ||
| 7333 | Keystone Electronics Corp | Ground Lug, #8, 4.3 Mm, Brass; |Keystone 7333 RoHS : Compliant |
| 0 | ||
 RS | 7333 | Keystone Electronics Corp | TERMINAL LUG SOLDER STUD #8 HEIGHT .875 HOLE SIZE .171 BRASS/TIN RoHS : Compliant |
| 987 | |
| 744770147 (3338601) | Wurth Elektronik | INDUCTORS, FIXED, WE-PD 1280 47UH 2.7A .1OHM |
| 41 | ||
| 1787333 | RS Pro | NYLON INSULATED CRIMP BOOTLACE FERRULE, COPPER, TIN PLATED, 6 AWG, 28MM L, GREEN |
| 39 | ||
| 249-4167-3334-504F | Dialight | INDICATOR PANEL MOUNT LED 0.375" KNURLED FLANGE NUT LOCK WASHER & NUT BLUE RoHS : Compliant |
| 20 | ||
| 249-7867-3331-504F | Dialight | INDICATOR PANEL MOUNT LED MNT-SZ 0.375" KNURLED FLANGE NUT LOCK WASHER & NUT RED RoHS : Compliant |
| 10 | ||
| 1333126 (784337 33312) | Marathon Special Products | POWER TERMINAL BLOCK, PANEL MOUNT, THERMOPLASTIC INSULATOR, 310A,3-P, 133 SERIES |
| 8 | ||
| 507-4857-3332-500F | Dialight | INDICATOR, PNL MNT, LED, MNT-SZ 1.188", CARTRIDGE, GREEN, 5V, SOLDER RoHS : Compliant |
| 5 | ||
| 2176733-3 | TE Connectivity | POWER RESISTOR, 1.5 OHM, 350W, WIRE WOUND, 2 TERMINATION, 5%, SCREW TERMINALS RoHS : Compliant |
| 4 | ||
| M7-33-427 (173335) | Brady Worldwide Inc | SELF-LAMINATING VINYL WRAP AROUND LBLS 4" H X 1.5" W WT, CLEAR RL/100 M710;BM |
| 1 | ||
| BL67-4AO-V (M6827333) | TURCK Inc | BL67-4AO-V, M6827333 |
| 1 | ||
| 7333 | CML Innovative Technologies | T1-¾, MF, 5.00V, 0.06A, 25000H, 0.05 MS CP |
| 0 | ||
| 7333 | EiKO Global LLC | 5V .06A T1-3/4 SC MIDGET FLANGE BASE |
| 0 | ||
| 7333 | Weller Hand Tools GmbH | WELLER, REPLACEMENT SCREW TYPE BULB FOR 8200 AND D550 |
| 0 | ||
| 7333 | Apex Tool Group LLC | WELLER, REPLACEMENT SCREW TYPE BULB FOR 8200 AND D550 |
| 0 | ||
| 7333 | Visual Communications Company | LAMP; INCANDESCENT, T-1 3/4 MIDGE FLANGE, 5 V; 0.06 A; 0.05 MSCP, 25000 HRS |
| 0 | ||
 Microchip Technology Inc | TC1073-3.3VCH713 | Microchip Technology Inc | 100mA LDO with Shutdown & /Error out & V REF Bypass, SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 27,000 | |
TC1173-3.3VOATR | Microchip Technology Inc | 300mA LDO with Shutdown, ERROR Output & Bypass, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 19,800 | ||
| TC1173-3.3VUATR | Microchip Technology Inc | 300mA LDO with Shutdown, ERROR Output & Bypass, MSOP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 13,955 | ||
| TC1173-3.3VUA | Microchip Technology Inc | 300mA LDO with Shutdown, ERROR Output & Bypass, MSOP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 300 | ||
| TC1173-3.3VOA | Microchip Technology Inc | 300mA LDO with Shutdown, ERROR Output & Bypass, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
DSC1001CC1-047.3333-3.20-mm-x-2.50-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 47.3333MHz, 50PPM, 1.8-3.3V, 0 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-12-08 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC1001CI1-047.3333 | Microchip Technology Inc | MEMS OSC, LVCMOS, 47.3333MHz, 50PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-12-11 RoHS : Compliant |
| 0 | ||
| DSC1001CC1-047.3333T | Microchip Technology Inc | MEMS OSC, LVCMOS, 47.3333MHz, 50PPM, 1.8-3.3V, 0 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-12-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC1001CI1-047.3333T | Microchip Technology Inc | MEMS OSC, LVCMOS, 47.3333MHz, 50PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-12-19 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 7333 | Keystone Electronics Corp | RoHS : Compliant | 5,772 | ||
| MS35307-333 | Parker Fasteners | 3,032 | ||||
| 7333-B-440-SS | RAF Electronic Hardware | 835 | ||||
| A373-339 | Seastrom Mfg | 378 | ||||
| 7333-B-440-AL-7 | RAF Electronic Hardware | 227 | ||||
| 7333-C-440-SS | RAF Electronic Hardware | 156 | ||||
| CA1733-3 | Alcoa Fastening Systems Aerospace | 35 | ||||
| MS35307-333 NP | 18 | |||||
| MS35307-333 | MS HEX CAP SCREWS | 17 | ||||
| 17333073 | HEX HEAD CAP SCREWS | 16 | ||||
| ST3M733-3L8 | Fastener Innovation Technology | 8 | ||||
| A373-332 | Seastrom Mfg | 7 | ||||
| ST3M733-3L3 | Fastener Innovation Technology | 5 | ||||
| 507-4757-3331-500F | MISC. LEDS | 4 | ||||
 Future Electronics | 7333 | Keystone Electronics Corp | Solder Matter Tin Fininsh 0.875 inch Long Terminal Lug RoHS : Compliant |
| 1,998 | |
| 7333 | Visual Communications Company | RoHS : Compliant |
| 0 | ||
| 7333 | Heyco | RoHS : Compliant |
| 0 | ||
 Onlinecomponents.com | 7333 | Visual Communications Company | RoHS : Compliant |
| 1,000 | |
| 7333 | JKL Components Corporation | T-1 3/4 Flanged Midget Lamp RoHS : Compliant |
| 8 | ||
| 7333 | Heyco | 7333-001 (TVR-77) RoHS : Compliant |
| 0 | ||
| TSD-7333 | Quest Technology International Inc | Total Grip Screwdriver Star T20X4 Blue RoHS : Compliant |
| 0 | ||
| 7333-10PK | Visual Communications Company | Lamp, Incandescent, T-1 3/4, Midget Flange, 5V, 60mA, 0.05MSCP, 25000 Hrs RoHS : Compliant |
| 0 | ||
| 79107-7333 | Molex | RoHS : Compliant |
| 0 | ||
| 63443-7333 | Molex | TERMINAL HOLD DOWN AND WIRE STOP RoHS : Compliant |
| 0 | ||
| 11-32-7333 | Molex | WIRE DEFLECT ADJUSTMENT B RoHS : Compliant |
| 0 | ||
| 7333-B-632-B | RAF Electronic Hardware | Partial Knurled Swage Standoff - Brass - 0.25" (6.35mm) Length. RoHS : Compliant |
| 0 | ||
| 7333-B-632-SS | RAF Electronic Hardware | 1/4 RD X 1/4 LENGTH RoHS : Compliant |
| 0 | ||
| 7333-B-440-AL | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 7333-B-440-B | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 7333-B-632-S | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 7333-C-632-B | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 7333-B-440-AL-7 | RAF Electronic Hardware | 1/4 RD X 1/4 LENGTH RoHS : Compliant |
| 0 | ||
 Rochester Electronics | MMZ27333BT1 | NXP Semiconductors | RF Amplifier 1.5GHz 2.7GHz 32.2dBm 24-QFN T/R RoHS : Compliant |
| 2,152 | |
TLV73330PDQNT | Texas Instruments | Fixed Positive LDO Regulator, 3V, 0.29V Dropout, PDSO4 RoHS : Compliant |
| 19,736 | ||
TPS7333QPWR | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 500mA 20-SOP T/R RoHS : Compliant |
| 7,372 | ||
| TPS7333QPW | Texas Instruments | IC Deserializer LVDS CMOS, TTL 455Mbps 3V - 3.6V 56-SOP T/R RoHS : Compliant |
| 8,908 | ||
TLV73330PQDBVRQ1 | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 300mA SOT-23-5 T/R RoHS : Compliant |
| 21,585 | ||
| TLV73333PDBVT | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 300mA SOT-23-5 T/R RoHS : Compliant |
| 5 | ||
TPS7333QPWLE | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 500mA 20-SOP Rail RoHS : Not Compliant |
| 3,000 | ||
| QPC7333SR | Qorvo | MCM, 5V, Voltage Controlled Tilt Board RoHS : Compliant |
| 100 | ||
HD6473337YCP16V | Renesas Electronics Corporation | IC MCU H8/300 16Bit 1 Core OTP 60kB (60k x 8) 16MHz 84-LCC RoHS : Compliant |
| 242 | ||
| SIT1602BC-73-33E-25.000000D | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 25MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 6,000 | ||
| SIT1602BC-73-33S-12.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 12MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 500 | ||
| SIT8008BI-73-33E-108.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 108MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 178 | ||
| SIT8918BAA73-33E-16.000000E | SiTime Corporation | MHz Oscillator, ±20 ppm, FlexEdge™, (7050) T/R RoHS : Compliant |
| 13,000 | ||
| SIT8925BA-73-33E-125.000000D | SiTime Corporation | 115 to 137 MHz, Wide Temperature AEC-Q100 Oscillator (-55 to +125°C) RoHS : Compliant |
| 6,000 | ||
| SIT8925BA-73-33E-125.000000E | SiTime Corporation | -40 to 125C, 2016, 50ppm, 3.3V, 125MHz, OE, Default, 1k pcs T&R 8 mm RoHS : Compliant |
| 13,000 | ||
 Sager | 3273334 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX 6/6X2,5 RD 2.5mm2 w/6mm2 feedin RoHS : Compliant |
| 750 | |
| ZW-15-13-T-S-733-360 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 142 | ||
| 7333 | Keystone Electronics Corp | Terminals SOLDER LUG #8 MATTE TINNED RoHS : Compliant |
| 0 | ||
| 0873334424 | Molex | Headers & Wire Housings | 0 | |||
| 0873334428 | Molex | Headers & Wire Housings | 0 | |||
| DRQ73-331-R | Eaton Bussmann | Power Inductors - SMD 330uH 0.44A 1.59ohms |
| 0 | ||
| ZW-05-19-L-D-787-333 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| P7-333121 | OTTO Engineering Inc | SUBMINIATURE MOMENTARY ACTION PUSHBUTTON SWITCH |
| 0 | ||
| SC73-330 | Signal Transformer Inc | Power Inductors - SMD Inductor SMD 33uH 0.85A170mohms2.52MHz | 0 | |||
| 2837333-1 | TE Connectivity | TE Connectivity OC-AT-S-FM-050F080F-181-1601 | 0 | |||
| 3273336 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX 6/6X2,5 YE 2.5mm2 w/6mm2 feedin RoHS : Compliant |
| 0 | ||
| ZW-05-14-L-D-787-333 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 530733-3 | TE Connectivity | Headers & Wire Housings MINI-BX PIN HDR ASY 60 POS RA RoHS : Not Compliant |
| 0 | ||
| 1511173334 | Molex | MGRID SHRD HDR TH/OPEG&CAP.75AULF 34CKT RoHS : Compliant | 0 | |||
| 1511173330 | Molex | MGRID SHRD HDR TH/OPEG&CAP.75AULF 30CKT RoHS : Compliant | 0 | |||
 Coilcraft Direct | RFS1317-333KL | Coilcraft Inc | Power inductor, shielded, 10% tol, RoHS RoHS : Compliant |
| 167 | |
 TME | RSF200JB-73-33K | YAGEO Corporation | Resistor: metal oxide; 33kΩ; 2W; ±5%; axial; 15.5mm RoHS : Compliant |
| 8,216 | |
| 733-334 | WAGO Innovative Connections | Connector: pluggable terminal block; socket; male; power supply RoHS : Compliant |
| 152 | ||
| 530733-3 | TE Connectivity | Pin header; male; PIN: 60; angled,right; Inom: 1.5A; 60V; THT; 1.27mm RoHS : Not Compliant |
| 132 | ||
| 3273334 | Phoenix Contact | Splice terminal: rail; 24A; 450V; push-in; PA; L: 21.7mm; 0.14÷4mm2 RoHS : Compliant |
| 17 | ||
| 2443733-3 | TE Connectivity | Connector: automotive; Automotive; IP67 |
| 10 | ||
| AP7333-18SAG-7 | Diodes Incorporated | IC: voltage regulator; LDO,linear,fixed; 1.8V; 0.3A; SOT23; SMD RoHS : Compliant |
| 7 | ||
| 173-33-2 | IRIMO | Socket: 6-angles; socket spanner,impact; HEX 33mm; 3/4" |
| 2 | ||
| 7333 | Keystone Electronics Corp | Tip: solder lug ring; 0.5mm; M4; Ø: 4.32mm; soldering; screw; brass RoHS : Compliant |
| 0 | ||
| 2CDS273337R0467 | ABB Low Voltage Products and Systems | Circuit breaker; 230/400VAC; 16A; Poles: 3; for DIN rail mounting |
| 0 | ||
| QMK316B7333KLHT | TAIYO YUDEN | Capacitor: ceramic; MLCC; 33nF; 250VDC; X7R; ±10%; SMD; 1206 RoHS : Compliant |
| 0 | ||
| TLV73330PDBVT | Texas Instruments | IC: voltage regulator; fixed; 3V; 0.3A; SOT23-5; SMD; reel,tape RoHS : Compliant |
| 0 | ||
| AP7333-25SRG-7 | Diodes Incorporated | IC: voltage regulator; LDO,linear,fixed; 2.5V; 0.3A; SOT23; SMD RoHS : Compliant |
| 0 | ||
| B32653A7333J189 | TDK Corporation | Capacitor: polypropylene; 33nF; 1.25kVDC; 500VAC; 26.5x15x6mm; THT RoHS : Compliant |
| 0 | ||
HMK107B7333MA-T | TAIYO YUDEN | Capacitor: ceramic; MLCC; 33nF; 100VDC; X7R; ±20%; SMD; 0603 RoHS : Compliant |
| 0 | ||
| MAT9851733 3M | igus Inc | Cable: servo drive; 3m; Standard: Allen Bradley; chainflex |
| 0 | ||
 Ameya Holding Limited | TLV73333PDBVR | Texas Instruments | RoHS : Compliant | 201,000 | ||
| MSASS32NSB7333KTNA01 | TAIYO YUDEN | RoHS : Compliant | 180,000 | |||
| AP7333-25SRG-7 | Diodes Incorporated | IC REG LDO 2.5V 0.3A SOT23R RoHS : Compliant | 138,000 | |||
| EMK105B7333KV8F | TAIYO YUDEN | RoHS : Compliant | 10,000 | |||
| TMK105B7333MV8F | TAIYO YUDEN | RoHS : Compliant | 10,000 | |||
| EMK105B7333KVHF | TAIYO YUDEN | RoHS : Compliant | 10,000 | |||
| TMK105B7333KV8F | TAIYO YUDEN | RoHS : Compliant | 10,000 | |||
| EMK105B7333MV8F | TAIYO YUDEN | RoHS : Compliant | 10,000 | |||
| TMK105B7333KVHF | TAIYO YUDEN | RoHS : Compliant | 9,400 | |||
| UMK212B7333MGHT | TAIYO YUDEN | RoHS : Compliant | 3,000 | |||
| UMK212B7333KGHT | TAIYO YUDEN | RoHS : Compliant | 3,000 | |||
| TPS7333QDR | Texas Instruments | RoHS : Compliant | 2,500 | |||
SMK325B7333KN-T | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| TLV77333PDBVR | Texas Instruments | RoHS : Compliant | 496 | |||
 ComSIT USA | 733336 | AVAILABLE EU | 635 | |||
| 733334 | AVAILABLE EU | 1,751 | ||||
| 733333 | AVAILABLE EU | 1,569 | ||||
| 7333958 | IPS LANDO | AVAILABLE EU | 321 | |||
ComSIT USA | KCS200JT73330RAA | Vitrohm Portuguesa LDA | Fixed Resistor, Wire Wound, 2W, 330ohm, 5% +/-Tol, 80ppm/Cel, Through Hole Mount RoHS : Compliant | 20,000 | ||
| AP733333SAG7 | Diodes Incorporated | 300 MILLIAMP, LOW QUIESCENT CURRENT, FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 3.3V, 0.55V Dropout, CMOS, PDSO3 RoHS : Compliant | 9,000 | |||
| AP733318SRG7 | Diodes Incorporated | LDO Regulator Pos 1.8V 0.3A 3-Pin SOT-23 T/R RoHS : Compliant | 3,000 | |||
| BFC233927333 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 800V, 20% +Tol, 20% -Tol, 0.033uF, Through Hole Mount RoHS : Not Compliant | 1,900 | |||
| CFR200JT73330R | YAGEO Corporation | Fixed Resistor, Carbon Film, 2W, 330ohm, 500V, 5% +/-Tol, 350ppm/Cel, Through Hole Mount RoHS : Not Compliant | 1,000 | |||
| 733362 | WAGO Innovative Connections | Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 1,000 | |||
| SIT8920BM7333E32000000E | SiTime Corporation | Electronic Component RoHS : Compliant | 890 | |||
| 733336 | WAGO Innovative Connections | Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 400 | |||
HD6473332F10 | Hitachi Ltd | SINGLE-CHIP EMBEDDED CONTROLLER Microcontroller, 16-Bit, OTPROM, 10MHz, CMOS, PQFP80 RoHS : Not Compliant | 90 | |||
| TPS7333QP | Texas Instruments | LOW-DROPOUT VOLTAGE REGULATOR WITH INTEGRATED DELAYED RESET FUNCTION Fixed Positive LDO Regulator, 3.3V, 0.4V Dropout, BICMOS, PDIP8 RoHS : Not Compliant | 50 | |||
 Interstate Connecting Components | 7333 | Keystone Electronics Corp | TERMINAL LUG RoHS : Compliant |
| 15 | |
| 47333-24T240 | ITT Interconnect Solutions | 47333-24T240 | 0 | |||
| 73334-111LF | Amphenol FCi | MJ HOR ESMT 6/6 H/I T&R RoHS : Compliant |
| 0 | ||
| 257-333P11-05PN | Glenair Inc | GLENAIR | 0 | |||
| 257-333P11-99PA | Glenair Inc | GLENAIR RoHS : Compliant | 0 | |||
| 257-333P21-25PA | Glenair Inc | GLENAIR RoHS : Compliant | 0 | |||
| 257-333P25-19SA | Glenair Inc | 0 | ||||
| 257-333P25-29PC | Glenair Inc | GLENAIR RoHS : Compliant | 0 | |||
| 47333-28T240 | ITT Interconnect Solutions | 47333-28T240 | 0 | |||
| 257-333P11-04PD | Glenair Inc | GLENAIR | 0 | |||
| 257-333P13-04PB | Glenair Inc | GLENAIR | 0 | |||
| 257-333P15-19PD | Glenair Inc | GLENAIR RoHS : Compliant | 0 | |||
| 257-333P17-08PD | Glenair Inc | GLENAIR | 0 | |||
| 257-333P23-55PE | Glenair Inc | GLENAIR RoHS : Compliant | 0 | |||
| 440HS030M1733-3B | Glenair Inc | BANDING BACKSHELL STRAIGHT W SHRINK BOOT RoHS : Compliant |
| 0 | ||
 PEI Genesis | J1733-37-R30S-2 | SOURIAU-SUNBANK |
| 0 | ||
| 507-4757-3331-500F | Dialight | RoHS : Compliant |
| 0 | ||
| 507-4857-3332-500F | Dialight | RoHS : Compliant |
| 0 | ||
| J1733-37-12S-2 | SOURIAU-SUNBANK |
| 0 | |||
| J1733-37-34S-1 | SOURIAU-SUNBANK |
| 0 | |||
| 507-5167-3337-500F | Dialight | RoHS : Compliant |
| 0 | ||
| BC-527333-13T | Amphenol Corporation |
| 0 | |||
| 13238733-37 | SOURIAU-SUNBANK |
| 0 | |||
| 507-4957-3333-500F | Dialight | RoHS : Compliant |
| 0 | ||
| 13238733-35 | SOURIAU-SUNBANK |
| 0 | |||
| 249-8067-3333-504F | Dialight | RoHS : Compliant |
| 0 | ||
| 88-569733-35P | Amphenol Corporation |
| 0 | |||
| 249-7867-3331-504F | Dialight | RoHS : Compliant |
| 0 | ||
| BC-527333-25R | Amphenol Corporation |
| 0 | |||
| KJ110773-33 | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | TMS-SCE-1/8-2.0-9-CS7333 | TE Connectivity | Connectors |
| 660 | |
| 10-527333-15T | Amphenol Corporation | Connector |
| 570 | ||
| ZW-05-13-L-D-787-333 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 346 | ||
| 73333-111LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 152 | ||
| 87733-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 149 | ||
| ZW-15-13-T-S-733-360 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 94 | ||
| FCR0733-36-03 | Incon Inc | Connector |
| 93 | ||
| 530733-3 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 87 | ||
| 88-565733-35E | Amphenol Corporation | PLUG |
| 37 | ||
| FFR0733-36-05 | Incon Inc | Connector |
| 21 | ||
| FFR0733-36-01 | Incon Inc | Connector |
| 21 | ||
| 88-565733-35S | Amphenol Corporation | PLUG |
| 2 | ||
| MSHT-254-037-333-220S | AirBorn a molex company | High Temperature, Right Angle Plated Thr |
| 2 | ||
| MK-2P2-037-333-220S | AirBorn a molex company | Vertical Plated Thru Hole PCB Metal Conn RoHS : Compliant |
| 1 | ||
| AAC7333-00 | TE Connectivity | backshells, |
| 1 | ||
 Richardson RFPD | DRQ73-331-R | Eaton Corporation | Inductor Power Shielded Drum Core 325.5uH/1302uH 2 RoHS : Compliant |
| 0 | |
| 73-3-33 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| R577333000 | Radiall | RF Switch 0MHz to 3GHz 80dB RoHS : Not Compliant |
| 0 | ||
| M15733/38-0004 | Spectrum Control | EMI Filter Low Pass LC-Circuit 10A 50VDC Solder Lu |
| 0 | ||
| R577333035 | Radiall | RF Switch DPDT 0MHz to 3GHz 80dB RoHS : Compliant |
| 0 | ||
| 37-3-33 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| DR73-331-R | Eaton Corporation | Inductor Power Shielded Drum Core 325.5uH/330uH 20 RoHS : Compliant |
| 0 | ||
| R-733.3D | RECOM Power GmbH | Module DC-DC 1-OUT 3.3V 3A 9.9W 12-Pin SIP Tube RoHS : Compliant |
| 0 | ||
| R-733.3P | RECOM Power GmbH | Module DC-DC 1-OUT 3.3V 3A 9.9W 12-Pin SIP Tube RoHS : Compliant |
| 0 | ||
| SI5338C-B07333-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 73-3-34 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| DRA73-331-R | Eaton Corporation | Inductor Power Shielded Drum Core 326.4uH/330uH 20 RoHS : Compliant |
| 0 | ||
| DRA73-330-R | Eaton Corporation | Inductor Power Shielded Drum Core 31.84uH/33uH 20% RoHS : Compliant |
| 0 | ||
| DRQ73-330-R | Eaton Corporation | Inductor Power Shielded Drum Core 34.41uH/137.6uH RoHS : Compliant |
| 0 | ||
| 47-3-33 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
 Rutronik | MFR100FTE73-33R | YAGEO Corporation | MFR100 33R 1% 1W TK50 RoHS : Compliant |
| 1,000 | |
| RSF3WSJT-73-33R | YAGEO Corporation | RSF3WS 33R 5% 3W TK300 RoHS : Compliant |
| 1,000 | ||
 Chip 1 Exchange | 825 50 110 2207333 | Wurth Elektronik | INSTOCK | 6,068 | ||
| B32653-A7333-K | TDK Electronics | INSTOCK RoHS : Compliant | 2,256 | |||
| EF7333CL | STMicroelectronics | INSTOCK | 1,376 | |||
| 73330-0200 | INSTOCK | 1,356 | ||||
| TPS7333QD | Texas Instruments | INSTOCK RoHS : Compliant | 567 | |||
| 73333-111 | Amphenol FCi | INSTOCK RoHS : Not Compliant | 396 | |||
| TPS77333DGK | INSTOCK | 322 | ||||
| PNP300JR-73-33R | YAGEO Corporation | INSTOCK RoHS : Compliant | 131 | |||
| MS35307-333 | INSTOCK | 80 | ||||
| 5-115557-333 | INSTOCK | 71 | ||||
| 7333 | KEY T | INSTOCK | 19 | |||
| SIT8924BA-73-33E-20.00000 | SiTime Corporation | INSTOCK | 19 | |||
| SIT8924BA-73-33E-20.0 | SiTime Corporation | INSTOCK | 19 | |||
| 733-372 | WAGO Innovative Connections | INSTOCK RoHS : Compliant | 10 | |||
| TPS7333QDR | Texas Instruments | INSTOCK RoHS : Compliant | 7 | |||
 Avnet Abacus | DR73-330-R | Eaton Corporation | Power Inductor SMD 33 H 131 A Shielded 135 A DR Series - Tape and Reel (Alt: DR73-330-R) RoHS : Compliant | 6,750 | ||
| CRS300JT-73-330RAA | Vitrohm Portuguesa LDA | Resistor 330 Ohm 5 3 W Axial Leaded Wirewound Precision - Tape and Reel (Alt: CRS300JT-73-330RAA) RoHS : Compliant | 3,000 | |||
| B32653A7333K | TDK Corporation | General Purpose Film Capacitor Metallized PP Radial Box 2 Pin 0033 uF 10 500 V 125 kV (Alt: B32653A7333K000) RoHS : Compliant | 1,440 | |||
| DR73-331-R | Eaton Corporation | Power Inductor SMD 330 H 420 mA Shielded 440 mA DR Series - Tape and Reel (Alt: DR73-331-R) RoHS : Compliant | 1,350 | |||
| MKT1817333015 | Vishay Intertechnologies | (Alt: MKT1817333015) RoHS : Compliant | 0 | |||
| QMK316B7333ML8T | TAIYO YUDEN | Cap Cer SMD 1206 33nF 20 250V X7R TR for medicalhigh quality applications (Alt: CGQMK316B7333ML8T) RoHS : Compliant | 0 | |||
| RSF200JR-73-33K | YAGEO Corporation | Through Hole Resistor 33 kOhm RSF Series 2 W 5 Axial Leaded 350 V Metal Oxide Film (Alt: RSF200JR-73-33K) RoHS : Compliant | 0 | |||
| PNP5WVJT-73-330R | YAGEO Corporation | Through Hole Resistor 330 Ohm PNP V Series 5 W 5 Axial Leaded 300 V Wirewound 300ppmC (Alt: PNP5WVJT-73-330R) RoHS : Not Compliant | 0 | |||
| KNP100JR-73-330R | YAGEO Corporation | Through Hole Resistor 330 Ohm KNP Series 1 W 5 Axial Leaded 400 V Wirewound 300ppmC (Alt: KNP100JR-73-330R) RoHS : Compliant | 0 | |||
| POS200JT-73-33RAA | Vitrohm Portuguesa LDA | Resistor 33 Ohm 5 2 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS200JT-73-33RAA) RoHS : Compliant | 0 | |||
| POS200GT-73-330RAA | Vitrohm Portuguesa LDA | Resistor 330 Ohm 2 2 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS200GT-73-330RAA) RoHS : Compliant | 0 | |||
| GMC7.3334J63K35TR12 | KEMET Corporation | - Tape and Reel (Alt: GMC7.3334J63K35TR12) RoHS : Compliant | 0 | |||
| MCASS32NSB7333KTNA01 | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 0033 uF 630 V 1210 3225 Metric 10 X7R MCAS Series (Alt: MCASS32NSB7333KTNA01) RoHS : Compliant | 0 | |||
| GMC12.7333J630B31TR24 | KEMET Corporation | - Tape and Reel (Alt: GMC12.7333J630B31TR24) RoHS : Compliant | 0 | |||
| GPC12.7333K1000B31TR24 | KEMET Corporation | - Tape and Reel (Alt: GPC12.7333K1000B31TR24) RoHS : Compliant | 0 | |||
Avnet Asia | MKT1817333015 | Vishay Intertechnologies | (Alt: MKT1817333015) RoHS : Compliant | 0 | ||
| 73334-111LF | Amphenol Corporation | (Alt: 73334-111LF) RoHS : Compliant | 0 | |||
| SIT8925BA-73-33E-125.000000E | SiTime Corporation | SCTSIT8925BA-73-33E-125.000000E MEMS OSC (Alt: SIT8925BA-73-33E-125.000000E) RoHS : Compliant | 0 | |||
| SIT1602BC-73-33E-33.333000E | SiTime Corporation | STANDARD FREQUENCY, LOW POWER OSCILLATOR, -20 TO 70C, 2016, 50PPM, 3.3V, 33.333MHZ, OE, SMD (Alt: SIT1602BC-73-33E-33.333000E) RoHS : Compliant | 0 | |||
| SIT1605BI-73-33S-9.000000 | SiTime Corporation | (Alt: SIT1605BI-73-33S-9.000000) RoHS : Compliant | 0 | |||
| SIT8925BA-73-33E-125.000000D | SiTime Corporation | SCTSIT8925BA-73-33E-125.000000D 125MHZ M (Alt: SIT8925BA-73-33E-125.000000D) RoHS : Compliant | 0 | |||
| SIT1602AC-73-33E-60.000000E | SiTime Corporation | (Alt: SIT1602AC-73-33E-60.000000E) RoHS : Compliant | 0 | |||
| QPC7333TR7 | Qorvo | (Alt: QPC7333TR7) RoHS : Compliant | 0 | |||
| BFC236647333 | Vishay Intertechnologies | (Alt: BFC236647333) RoHS : Compliant | 0 | |||
| BFC233927333 | Vishay Intertechnologies | (Alt: BFC233927333) RoHS : Compliant | 0 | |||
 Avnet Silica | AP7333-25SRG-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 2 to 6 V in 300 mV Drop 25 V300 mA out SOT23R3 (Alt: AP7333-25SRG-7) RoHS : Compliant | 3,000 | ||
| AP7333-10SAG-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 2 to 6 V in 300 mV Drop 1 V300 mA out SOT233 (Alt: AP7333-10SAG-7) RoHS : Compliant | 3,000 | |||
| TC1173-3.3VUA | Microchip Technology Inc | LDO Regulator Pos 33V 03A 8Pin MSOP Tube (Alt: TC1173-3.3VUA) RoHS : Compliant | 0 | |||
| TC1173-3.3VOA | Microchip Technology Inc | LDO Regulator Pos 33V 03A 8Pin SOIC N Tube (Alt: TC1173-3.3VOA) RoHS : Compliant | 0 | |||
| AP7333-15SAG-7 | Diodes Incorporated | LDO Regulator Pos 15V 03A 3Pin SOT23 TR (Alt: AP7333-15SAG-7) RoHS : Compliant | 0 | |||
| AP7333-18SRG-7 | Diodes Incorporated | LDO Regulator Pos 18V 03A 3Pin SOT23R TR (Alt: AP7333-18SRG-7) RoHS : Compliant | 0 | |||
| AP7333-28SAG-7 | Diodes Incorporated | LDO Regulator Pos 28V 03A 3Pin SOT23 TR (Alt: AP7333-28SAG-7) RoHS : Compliant | 0 | |||
| DSC1001CI1-047.3333T | Microchip Technology Inc | (Alt: DSC1001CI1-047.3333T) RoHS : Compliant | 0 | |||
| SIT8924BE-73-33E-50.000000 | SiTime Corporation | SIT8924B Automotive AECQ100 Oscillator 50000000MHz (Alt: SIT8924BE-73-33E-50.000000) RoHS : Compliant | 0 | |||
| SIT1618BE-73-33N-8.000000D | SiTime Corporation | Silicon Oscillator 8MHz 33V 15pF 4Pin QFN TR (Alt: SIT1618BE-73-33N-8.000000D) RoHS : Compliant | 0 | |||
| SIT8924BA-73-33E-33.333330 | SiTime Corporation | SiT8924B A Automotive AECQ100 Oscillator 33V10 33333330MHz (Alt: SIT8924BA-73-33E-33.333330) RoHS : Compliant | 0 | |||
| SIT8008BI-73-33E-31.250000G | SiTime Corporation | Silicon Oscillator 3125MHz 33V 15pF 4Pin QFN TR (Alt: SIT8008BI-73-33E-31.250000G) RoHS : Compliant | 0 | |||
| SIT8924BAA73-33E-24.000000G | SiTime Corporation | (Alt: SIT8924BAA73-33E-24.000000G) RoHS : Compliant | 0 | |||
| SIT8924BE-73-33E-20.000000G | SiTime Corporation | SiT8924B Automotive AECQ100 Oscillator 33 V 10 20000000MHz (Alt: SIT8924BE-73-33E-20.000000G) RoHS : Compliant | 0 | |||
| SIT8008BI-73-33E-33.333333G | SiTime Corporation | (Alt: SIT8008BI-73-33E-33.333333G) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 2322-211-73331 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,540 | |
| 273-33 | Xicon Passive Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,765 | ||
| 273-338 | Radio Shack | IN STOCK SHIP TODAY |
| 1,700 | ||
| PZ27333-2120 | Foxconn | IN STOCK SHIP TODAY | 480 | |||
RSF200JB-73-330R | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 170 | ||
| 73-334-0 | Mode Electronics | IN STOCK SHIP TODAY |
| 55 | ||
| DR73-330-R | Cooper Industries | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| B32653A7333K000 | TDK Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 1773330001 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 10 | ||
| 73333-111 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| 249-7967-3332-504 | Dialight | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
 DB Roberts | R18733-3 | Vlier |
| 102 | ||
| 7333 | Heyco | 7333-001 (TVR-77) | 0 | |||
| 20573331 | Essentra Components | 12 NPT, M20 METRIC SNAP FIT PL | 0 | |||
| 7333-D-440-SS | RAF Electronic Hardware | 0 | ||||
| B7-33-301-10 | Southco | 0 | ||||
| 7333-B-632-S-12 | RAF Electronic Hardware | 0 | ||||
| 7333-B-440-B | RAF Electronic Hardware | BRASS-PARTIAL KNURL SWAGE TAP THROUGH | 0 | |||
| 7333-B-440-AL-7 | RAF Electronic Hardware | 0 | ||||
| 7333-B-440-SS | RAF Electronic Hardware | SWAGE STANDOFF,SS,4-40,1/4OD | 0 | |||
| 7333-B-632-B | RAF Electronic Hardware | 0 | ||||
| 7333-C-632-B | RAF Electronic Hardware | 0 | ||||
| 7333-B-632-B-16 | RAF Electronic Hardware | STNDRD BRASS PRTL KNURL SHANK SWAGE MT STNDOFF | 0 | |||
| 7333-B-440-A-7 | RAF Electronic Hardware | 0 | ||||
| 7333-C-440-SS | RAF Electronic Hardware | 1/4 Rd X 1/4 Length | 0 | |||
 EBV Elektronik | TC1073-3.3VCH713 | Microchip Technology Inc | LDO Regulator Pos 33V 01A 6Pin SOT23A TR (Alt: TC1073-3.3VCH713) RoHS : Compliant | 0 | ||
 FDH Electronics | 6773-3320 | Silver State Wire & Cable | Wire and Cable | 500 | ||
| 10-527333-17R | Amphenol Aerospace | Circular Conn |
| 195 | ||
| 10-527333-15T | Amphenol Aerospace | Connector Acc |
| 143 | ||
| 10-527333-09R | Amphenol Aerospace | Connector Acc |
| 137 | ||
| 10-527333-11T | Amphenol Aerospace | Connector Acc |
| 98 | ||
| 10-527333-23T | Amphenol Aerospace | Circular Conn |
| 44 | ||
| 10-527333-25T | Amphenol Aerospace | Connector Acc |
| 44 | ||
| 10-527333-19R | Amphenol Aerospace | Connector Acc |
| 21 | ||
| 10-527333-15R | Amphenol Aerospace | Circular Conn |
| 13 | ||
| 073334-2000 | Smiths Interconnect | Connector Acc |
| 8 | ||
| 10-527333-13R | Amphenol Aerospace | Connector Acc |
| 8 | ||
| 440HS030M1733-3 | Glenair Inc | Backshells & Ac RoHS : Compliant | 0 | |||
| 10-527333-25R | Amphenol Aerospace | Circular Conn |
| 0 | ||
| 10-527333-23R | Amphenol Aerospace | Circular Conn | 0 | |||
| 10-527333-21T | Amphenol Aerospace | Connector Acc | 0 | |||
 Maritex | TLV73330PDBVR | Texas Instruments | LDO Regulators; TLV73330PDBVR; TEXAS INSTRUMENTS; 5; 300 mA; 3 V RoHS : Compliant |
| 10,079 | |
| 7447773331 | Wurth Elektronik | Inductor; SMD; 330uH; 0.66A; 1.09R; 7.4x7.3x4.5mm; 20% RoHS : Compliant |
| 3,120 | ||
| TLV73333PQDRVRQ1 | Texas Instruments | LDO Regulators; TLV73333PQDRVRQ1; TEXAS INSTRUMENTS; 6; 300 mA; 3.3 V RoHS : Compliant |
| 1,494 | ||
| DR73-331-R | Eaton Corporation | Inductor; SMD; 330uH; 0.44A; 1.59R; 7.6x7.6x3.55mm; 20% RoHS : Compliant |
| 1,023 | ||
| 773-331 | WAGO Innovative Connections | Adapter 773-331 RoHS : Compliant |
| 200 | ||
| 733-368 | WAGO Innovative Connections | Plug & Socket Connectors; 733-368; WAGO; 1; 8; Grey; 11.5 mm RoHS : Compliant |
| 80 | ||
| TPS7333QP | Texas Instruments | LDO Regulators; TPS7333QP; TEXAS INSTRUMENTS; 8; 1; 500 mA; 3.3 V RoHS : Compliant |
| 5 | ||
 Neutron USA | 1473330000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LSF-SMD 3.50/04/135 SN BK RL RoHS : Compliant |
| 50 | |
| 3073335 | Phoenix Contact | Fixed Terminal Blocks UW 10/S RoHS : Compliant |
| 50 | ||
| 1873333 | Phoenix Contact | Pluggable Terminal Blocks 15 Pos 5.08mm pitch Plug 24-12AWG Spring RoHS : Compliant |
| 39 | ||
| 83733314 | Crouzet | Limit Switches LMTSW 1M THRDED BRL PSHBTN |
| 6 | ||
| XCSLE2727333 | Telemechanique Sensors | Limit Switches Plastic, Locking w/o power |
| 2 | ||
| 3273330 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX 6/6X2,5 GY 2.5mm2 w/6mm2 feedin RoHS : Compliant |
| 0 | ||
| 507-4957-3333-500F | Dialight | LED Panel Mount Indicators LED DATALITE RoHS : Compliant |
| 0 | ||
| 9000-17333-1421110 | Murrelektronik GmbH | Power Supply Emparro Advanced 3-phase, IN: 3x350 - 500VAC; OUT: 46,5 - 56V/10AD RoHS : Compliant |
| 0 | ||
| 83733327 | Crouzet | Low-profile limit switch, SPDT, 5A 250VAC, Metal plunger, 0.5m cable |
| 0 | ||
| 83733310 | Crouzet | Limit Switch, Pushbutton, Top Mounted Plunger, 5A, w/2 Meter Cable |
| 0 | ||
| 83733315 | Crouzet | Limit Switch Automotive Top Mounted Plunger |
| 0 | ||
| 3273332 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX 6/6X2,5 BU 2.5mm2 w/6mm2 feedin RoHS : Compliant |
| 0 | ||
| 09563527613, 6927333 | HARTING Technology Group | 44 Way Right Angle Through Hole Mount PCB D-sub Connector Socket, 2.29mm Pitch |
| 0 | ||
| 1407333 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-10 0-28R/FS SCO RAIL RoHS : Compliant |
| 0 | ||
| 1973330000 | Weidmüller Interface GmbH & Co. KG | Headers & Wire Housings SCD 3.81/18/90F 3.2SN OR BX RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W03733-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W03733-300 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03733-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W03733-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 102 | |
| PE3W11733-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 10-32 Male Right Angle to BNC Female Bulkhead Cable 36 Inch Length Using RG188-DS Coax., Radio frequency assembly 10-32 male right angle to BNC female bulkhead cable 36 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10-32 male right angle to BNC female bulkhead cable 36 inch length using RG188-DS coax, 10-32 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 10-32 cable connection on one end and BNC bulkhead cable connection on the other. Our right angle 10-32 to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3W11733-36 can also be known as a right angle 10-32 plug to BNC jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to BNC jack cable assembly PE3W11733-36 is built with RG188-DS which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10-32 right angle male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11733-36 can also be used in the other direction and will be BNC female bulkhead to right angle 10-32 male cable assembly if the opposite connectivity is required. 10-32 right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male right angle to BNC female bulkhead cable 36 inch length using RG188-DS coax. |
| 74 | ||
| PE3W17333 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Male Cable Using PE-P195 Coax. PE3W17333 is a reverse polarity TNC male to reverse polarity TNC male cable using PE-P195 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17333 TNC reverse polarity male to TNC reverse polarity male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3733-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male Right Angle to BNC Male Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly SMA male right angle to BNC male cable 36 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3733-36, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3733-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3733-36 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable 36 inch length using RG223 coax. |
| 0 | ||
| PE3C7333 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable Using RG316 Coax., Pasternack’s PE3C7333 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3W07333 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7333-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 60 Inch Length Using RG316 Coax., Pasternack’s PE3C7333-60 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333-60 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333-60 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333-60 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333-60 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6733-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly BNC male to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and TNC cable connection on the other. Our low loss BNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6733-36 can also be known as a low loss BNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to TNC plug cable assembly PE3C6733-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6733-36 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3C7333-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 6 Inch Length Using RG316 Coax., Pasternack’s PE3C7333-6 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333-6 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333-6 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333-6 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333-6 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE37733-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug Right Angle to SMB Jack Bulkhead Cable 36 Inch Length Using RG178 Coax., Radio frequency assembly MMCX plug right angle to SMB jack bulkhead cable 36 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMB jack bulkhead cable 36 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMCX cable connection on one end and a SMB bulkhead cable connection on the other. Our right angle MMCX to SMB cable assembly has a plug gender on end 1 and a jack on end 2. PE37733-36 can also be known as a right angle MMCX male to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE37733-36 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. Our right angle MMCX plug to bulkhead SMB jack cable has a maximum VSWR of 1.4:1. MMCX male to SMB female cable assembly PE37733-36 is built with RG178 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE37733-36 can also be used in the other direction and will be a SMB jack bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMB cable assembly for quick shipment worldwide. Variations of MMCX and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMB RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7333-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 36 Inch Length Using RG316 Coax., Pasternack’s PE3C7333-36 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333-36 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333-36 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333-36 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333-36 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3FCA733-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Female (w/o pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-3M. Pasternack’s PE3FCA733-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/o pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA733-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA733-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W07333LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Female Bulkhead Cable Using RG316 Coax, LF Solder. PE3W07333LF is a SMA male right angle to TNC female bulkhead cable using RG316 coax. This Pasternack SMA male right angle to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07333LF SMA male right angle to TNC female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C7333-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 12 Inch Length Using RG316 Coax., Pasternack’s PE3C7333-12 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333-12 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333-12 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333-12 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333-12 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7333-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 24 Inch Length Using RG316 Coax., Pasternack’s PE3C7333-24 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333-24 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333-24 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333-24 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333-24 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 63733-3 | TE Connectivity | GROUND CLIP 18-22AWG TPPBR Special Purpose Terminal Type: Grounding Clip Terminal Material Thickness: .02 in Terminal Material Thickness: .51 mm Wire Size: 22 – 18 AWG Wire Size: .3 – .79 mm² Grounding Clip .02" .51 mm 22 – 18 AWG | Special Purpose Terminal | Part Number: 63733-3 | Internal Number: 63733-3 | TE Connectivity RoHS : Compliant |
| 37,312 | |
 Vyrian | 733-336 | WAGO Innovative Connections | Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 18,130 | ||
| 733-332 | WAGO Innovative Connections | Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 17,253 | |||
| 507-4857-3332-500F | Dialight | Single Color LED, Green, 6.99mm RoHS : Compliant | 15,984 | |||
| BFC233917333 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 0.033uF, Through Hole Mount RoHS : Compliant | 15,642 | |||
| MAL210617333E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 40V, 30% +Tol, 10% -Tol, 33000uF, Chassis Mount RoHS : Compliant | 15,295 | |||
| 73334-111LF | Amphenol Communications Solutions | Telecom and Datacom Connector, 6 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Jack | 10,447 | |||
| 507-4957-3333-500F | Dialight | Single Color LED, Yellow, 6.99mm RoHS : Compliant | 9,374 | |||
| 733-362 | WAGO Innovative Connections | Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,797 | |||
| PTLV73333PQDBVRQ1 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.32V Dropout, PDSO5 | 7,056 | |||
| 1773336 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 6,799 | |||
| TLV73333PQDRVRQ1 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.32V Dropout, PDSO6 RoHS : Compliant | 5,459 | |||
| 733-368 | WAGO Innovative Connections | Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,238 | |||
| ACPM-7333-TR1 | Broadcom Limited | 4,048 | ||||
| 733-370/105-604/997-406 | WAGO Innovative Connections | Strip Terminal Block RoHS : Compliant | 896 | |||
| 733-338/105-604/997-446 | WAGO Innovative Connections | Strip Terminal Block RoHS : Compliant | 668 | |||
 Win Source Electronics | TLV73330PDBVR | Texas Instruments | IC REG LINEAR 3V 300MA SOT23-5 / TLV733P Capacitor-Free, 300-mA, Low-Dropout Regulator RoHS : Compliant |
| 270,000 | |
| TLV73330PDBV | Texas Instruments | LDO Voltage Regulator 300mA 3.0V Fixed Output SOT-23-5 |
| 270,000 | ||
| TLV73330PDBVT | Texas Instruments | IC REG LINEAR 3V 300MA SOT23-5 RoHS : Compliant |
| 210,747 | ||
| TLV73333PDQNT | Texas Instruments | IC REG LDO 3.3V 0.3A 4X2SON RoHS : Compliant |
| 146,720 | ||
| TLV73333PDQNR | Texas Instruments | IC REG LDO 3.3V 0.3A 4X2SON RoHS : Compliant |
| 144,200 | ||
| TLV73333PQDBVRQ1 | Texas Instruments | IC REG LINEAR 3.3V 300MA SOT23-5 RoHS : Compliant |
| 94,702 | ||
| TLV73333PDBV | Texas Instruments | LDO Voltage Regulator 300mA 3.3V Fixed Output SOT-23-5 |
| 70,258 | ||
| TLV73333PDBVR | Texas Instruments | IC REG LDO 3.3V 0.3A 5SOT23 RoHS : Compliant |
| 67,270 | ||
| TLV73333PDBVT | Texas Instruments | IC REG LDO 3.3V 0.3A 5SOT23 RoHS : Compliant |
| 67,080 | ||
| TLV73333PQDRVRQ1 | Texas Instruments | IC REG LINEAR 3.3V 300MA 6WSON / Capacitor-Free, 300-mA, Low Dropout (LDO) Linear Regulator RoHS : Compliant |
| 51,334 | ||
| AP7333-33SAG-7 | Diodes Incorporated | IC REG LDO 3.3V 0.3A SOT23-3 RoHS : Compliant |
| 48,000 | ||
| EMP8733-30VB03GRR | Elite Semiconductor Memory Technology Inc |
| 36,000 | |||
| HT7333-A | Nexperia | SOT-89 MONITORS & RESET CIRCUITS |
| 21,198 | ||
TPS77333DGKRG4 | Texas Instruments | 250-mA LDO REGULATORS WITH 8-PIN MSOP PACKAGING RoHS : Compliant |
| 10,290 | ||
| TPS77333DGKR | Texas Instruments | IC REG LDO 3.3V 0.25A 8VSSOP RoHS : Compliant |
| 4,460 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand