| Electronic Components Datasheet Search |
|
7118 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 7-2178711-8 | TE Connectivity | Connector: Micro-MaTch; data; PIN: 8; straight; SMT; on PCBs RoHS : Compliant |
| 28,800 | |
| RJE71-188-1451 | Amphenol Corporation | Connector: RJ45; data transfer; PIN: 8; Cat 6; shielded,EMI; 8p8c RoHS : Compliant |
| 550 | ||
| 2271183-1 | TE Connectivity | Connector: wire-wire; plug; female; power supply; 3A; 600V; PIN: 2 RoHS : Compliant |
| 333 | ||
| 20-871-1818 | Eurostat Group | Protection bag; ESD; L: 457mm; W: 457mm; Thk: 76um; <100GΩ |
| 60 | ||
| RJE71-188-1411 | Amphenol Corporation | Coupler; RJF; PIN: 8; Cat 6; shielded; 8p8c; RJ45 socket,both sides RoHS : Compliant |
| 10 | ||
| 17118-9998 | Breve Tufvassons sp z o o | Transformer: toroidal; 100VA; 230VAC; 17V; 5.88A; Leads: cables |
| 6 | ||
| 1577118-1 | TE Connectivity | Tip: ring; M12; non-insulated; tinned; copper; 1/0AWG RoHS : Compliant |
| 3 | ||
| TJ0711830000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; power supply |
| 0 | ||
TPS77118DGK![]() | Texas Instruments | IC: voltage regulator; LDO,linear,fixed; 1.8V; 0.15A; VSSOP8; SMD RoHS : Compliant |
| 0 | ||
| TJ0711840000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; power supply |
| 0 | ||
| TS17118A0000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; power supply |
| 0 | ||
| CRW08FP7--118R | Viking Technology | Resistor: thick film; 118Ω; SMD; 0508; 1W; ±1%; CRW; -55÷155°C |
| 0 | ||
| M7-118-492 | Brady Worldwide Inc | Label; white; two-piece; -196÷110°C; Ø: 9.53mm |
| 0 | ||
| 2711870000 | Weidmüller Interface GmbH & Co. KG | 2711870000 RoHS : Compliant |
| 0 | ||
| 7000-44711-8510300 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male straight,RJ45 plug; 3m; 60VDC RoHS : Compliant |
| 0 | ||
![]() Verical | 7118019-C | Approved Technology | 7118019-C |
| 3,219 | |
| 7118021-C | Approved Technology | 7118021-C |
| 3,189 | ||
| 7118N | ebm-papst | DC Fan Axial Ball Bearing 48V 24V to 60V 211.9CFM 53dB 150 X 38mm RoHS : Compliant |
| 134 | ||
| 7118N/2 | ebm-papst | DC Fan Axial Sensor RoHS : Compliant |
| 19 | ||
| 7118N/2 | ebm-papst | DC Fan Axial Sensor RoHS : Compliant |
| 5 | ||
![]() Avnet Americas | RC0402FR-07118KL | YAGEO Corporation | SMD Chip Resistor, 118 kOhm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose, RC Series - Tape and Reel (Alt: RC0402FR-07118KL) RoHS : Compliant |
| 90,000 | |
| RC0603FR-07118KL | YAGEO Corporation | SMD Chip Resistor, 118 kOhm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: RC0603FR-07118KL) RoHS : Compliant |
| 5,000 | ||
| RJE711881441 | Amphenol Corporation | Modular Connector, Modular Jack, 1 x 1 (Port), 8P8C, Cat6, Through Hole Mount - Trays (Alt: RJE711881441) RoHS : Compliant |
| 538 | ||
| 142-0711-821 | Bel Fuse | Conn SMA RCP 0Hz to 18GHz 50Ohm Solder ST Edge Mount Gold - Bag (Alt: 142-0711-821) RoHS : Compliant |
| 125 | ||
| 142-0711-826 | Bel Fuse | - Bag (Alt: 142-0711-826) RoHS : Compliant |
| 100 | ||
| TW-20-07-S-D-347-118 | Samtec Inc | Board Stackers & Spacers, Pin Header, 8.81 mm, 40 Contacts, Solder, 2 Rows, 2 mm, TW Series - Bulk (Alt: TW-20-07-S-D-347-118) RoHS : Compliant |
| 0 | ||
| AW-21-03-G-D-177-118 | Samtec Inc | - Rail/Tube (Alt: AW-21-03-G-D-177-118) RoHS : Compliant |
| 0 | ||
| TS17118C0000G | Amphenol Corporation | - Bulk (Alt: TS17118C0000G) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18E-3.570000G![]() | SiTime Corporation | - Tape and Reel (Alt: SIT1602BI-71-18E-3.570000G) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18N-7.372800D![]() | SiTime Corporation | Silicon Oscillator 7.3728MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BI-71-18N-7.372800D) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18S-12.000000E![]() | SiTime Corporation | Silicon Oscillator 12MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BI-71-18S-12.000000E) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18S-28.636300D![]() | SiTime Corporation | - Tape and Reel (Alt: SIT1602BI-71-18S-28.636300D) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18S-3.570000E![]() | SiTime Corporation | Silicon Oscillator 3.57MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BI-71-18S-3.570000E) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18S-54.000000E![]() | SiTime Corporation | Silicon Oscillator 54MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BI-71-18S-54.000000E) RoHS : Compliant |
| 0 | ||
SIT1602BI-71-18S-66.666660D![]() | SiTime Corporation | - Tape and Reel (Alt: SIT1602BI-71-18S-66.666660D) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 71183070 | Yazaki Corp | Automotive Connectors CONN 7P PA NAT RoHS : Compliant |
| 768 | |
| 71183090 | Yazaki Corp | Automotive Connectors CONN 9P PA NAT RoHS : Compliant |
| 495 | ||
| 71183460 | Yazaki Corp | Automotive Connectors CONN 6P PA NAT RoHS : Compliant |
| 226 | ||
| 7118 | JKL Components Corporation | Lamps Std Bi-Pin Based .115A .15M RoHS : Compliant |
| 180 | ||
| 09474747118 | HARTING Technology Group | Ethernet Cables / Networking Cables RJI CORD 4X2AWG 26/7 OVERM 7.5M RoHS : Compliant |
| 33 | ||
| 7118-RC | Bourns Inc | Common Mode Chokes / Filters 1.7mH 5amp RoHS : Compliant |
| 0 | ||
| 7118N | ebm-papst | DC Fans DC Axial Fan with Wallring, 150x38mm Round, 24-60VDC, 308m3/h, Ball Bearing RoHS : Compliant |
| 0 | ||
| 71183130 | Yazaki Corp | Automotive Connectors CONN 13P PA NAT RoHS : Compliant |
| 0 | ||
| 7118331030 | Yazaki Corp | Automotive Connectors CONN 1P PA BLK RoHS : Compliant |
| 0 | ||
| 18D11B10 | Vishay Intertechnologies | Motion & Position Sensors - Industrial 018-4-11 |
| 0 | ||
| 71-188063-98S | Amphenol Corporation | Circular MIL Spec Connector PLUG |
| 0 | ||
| 71-184084-08P | Amphenol Corporation | Circular MIL Spec Connector |
| 0 | ||
| 71-184755-08P | Amphenol Corporation | Circular MIL Spec Connector PTSF06E16-8P RoHS : Not Compliant | 0 | |||
![]() Newark | 68711814522 | Wurth Elektronik | Ffc, 0.5Mm, R/A, Bottom, Ziif, 18Way; |Würth Elektronik 68711814522 RoHS : Compliant |
| 2,000 | |
| ADP7118WAUJZ-3.3-R7 | Analog Devices Inc | Ldo Voltage Regulator, Fixed; |Analog Devices, Inc. ADP7118WAUJZ-3.3-R7 RoHS : Compliant |
| 1,812 | ||
| ADP7118WAUJZ-3.3-R7 | Analog Devices Inc | Ldo Voltage Regulator, Fixed; |Analog Devices, Inc. ADP7118WAUJZ-3.3-R7 RoHS : Compliant |
| 1,812 | ||
| ADP7118AUJZ-1.8-R7 | Analog Devices Inc | Ldo, Fixed, 1.8V, 0.2A, -40 To 125Deg C; |Analog Devices, Inc. ADP7118AUJZ-1.8-R7 RoHS : Compliant |
| 1,188 | ||
| ADP7118AUJZ-1.8-R7 | Analog Devices Inc | Ldo, Fixed, 1.8V, 0.2A, -40 To 125Deg C; |Analog Devices, Inc. ADP7118AUJZ-1.8-R7 RoHS : Compliant |
| 1,188 | ||
| 971180321 | Wurth Elektronik | Standoff, Hex Male-Female, 18Mm, M3; |Würth Elektronik 971180321 RoHS : Compliant |
| 842 | ||
| ADAU7118ACPZRL7 | Analog Devices Inc | Adc, 24Bit, Lfcsp-Ep-16, -40 To 85Deg C; |Analog Devices, Inc. ADAU7118ACPZRL7 RoHS : Compliant |
| 467 | ||
| ADAU7118ACPZRL7 | Analog Devices Inc | Adc, 24Bit, Lfcsp-Ep-16, -40 To 85Deg C; |Analog Devices, Inc. ADAU7118ACPZRL7 RoHS : Compliant |
| 467 | ||
| 68711814522 | Wurth Elektronik | Ffc, 0.5Mm, R/A, Bottom, Ziif, 18Way; |Würth Elektronik 68711814522 RoHS : Compliant |
| 407 | ||
| ZW-12-12-T-D-787-118 | Samtec Inc | Conn Stack Brd, 2.54Mm, 24Pos, Hdr; |Samtec, Inc. ZW-12-12-T-D-787-118 RoHS : Compliant |
| 248 | ||
| TW-20-07-S-D-347-118 | Samtec Inc | Flex Surf Mou Boa Stac Head,2.00 Pitch; |Samtec, Inc. TW-20-07-S-D-347-118 RoHS : Compliant |
| 223 | ||
| TW-10-05-T-D-197-118 | Samtec Inc | Conn Stack Brd, 2Mm, 20Pos, Hdr; |Samtec, Inc. TW-10-05-T-D-197-118 RoHS : Compliant |
| 186 | ||
| 1071180 | Phoenix Contact | Tb, Wire To Brd, 4Pos, 16Awg; |Phoenix Contact 1071180 RoHS : Compliant |
| 23 | ||
| BU-1420711811 | Mueller Electric Company | Rf Conn, Sma, Jack, 50 Ohm, Pcb; Connector Type:Sma Coaxial; Connector Body Style:Straight Jack; Coaxial Termination:Board Edge/End Launch; Impedance:50Ohm; Coaxial Cable Type:-; Contact Material:Brass; Frequency Max:18Ghz Rohs Compliant: Yes RoHS : Compliant |
| 20 | ||
| BU-1420711811 | Mueller Electric Company | Rf Conn, Sma, Jack, 50 Ohm, Pcb; |Mueller Electric BU-1420711811 RoHS : Compliant |
| 15 | ||
![]() Analog Devices Inc | ADP7118ARDZ-1.8 | Analog Devices Inc | 20V 200mA LDO 1.8Vo RoHS : Compliant |
| 18,446 | |
| ADP7118WAUJZ-1.8-R7 | Analog Devices Inc | 20V 200mA LDO 5.0Vo RoHS : Compliant |
| 18,000 | ||
| ADP7118WAUJZ-2.5-R7 | Analog Devices Inc | 20V 200mA LDO 5.0Vo RoHS : Compliant |
| 12,346 | ||
| ADP7118ARDZ-2.5 | Analog Devices Inc | 20V 200mA LDO 2.5Vo RoHS : Compliant |
| 6,927 | ||
| ADP7118ARDZ-1.8-R7 | Analog Devices Inc | 20V 200mA LDO 1.8Vo RoHS : Compliant |
| 5,000 | ||
| ADP7118AUJZ-4.5-R7 | Analog Devices Inc | 20V 200mA LDO 4.5Vo RoHS : Compliant |
| 3,713 | ||
| ADP7118AUJZ-2.5-R7 | Analog Devices Inc | 20V 200mA LDO 2.5Vo RoHS : Compliant |
| 954 | ||
| ADP7118WAUJZ-3.3-R7 | Analog Devices Inc | 20V 200mA LDO 5.0Vo RoHS : Compliant |
| 582 | ||
| ADP7118ACPZN1.8-R7 | Analog Devices Inc | 20V 200mA LDO 1.8Vo RoHS : Compliant |
| 452 | ||
| ADP7118ARDZ | Analog Devices Inc | 20V 200mA LDO AdjVo RoHS : Compliant |
| 40 | ||
| ADP7118UJ-EVALZ | Analog Devices Inc | Eval Board RoHS : Compliant |
| 37 | ||
| ADP7118RD-EVALZ | Analog Devices Inc | Eval Board RoHS : Compliant |
| 30 | ||
| EVAL-ADAU7118Z | Analog Devices Inc | ADAU7118 EVALUATION BOARD RoHS : Compliant |
| 12 | ||
| ADP7118ACPZN3.3-R7 | Analog Devices Inc | 20V 200mA LDO 3.3Vo RoHS : Compliant |
| 0 | ||
| ADP7118AUJZ-R2 | Analog Devices Inc | 20V 200mA LDO adjVo RoHS : Compliant |
| 0 | ||
![]() RS | 8971183 | RS Pro | TERMINAL BLOCK HEADER RIGHT ANGLE PCB MOUNT 2 CONTACT 1 ROW 5MM THROUGH HOLE |
| 280 | |
| 142-0711-826 | Cinch Connectivity Solutions | SMA JACK END LAUNCH ROUND CONTACT RoHS : Compliant |
| 152 | ||
| 471187 | RS Pro | CABLE MOUNT IDC CONNECTOR SOCKET 10 WAY 2.54MM PITCH 10 WAY SC SERIES |
| 26 | ||
| BU-1420711811 | Mueller Electric Company | CONN SMA JACK STR 50OHM EDGE M |
| 20 | ||
| MX-FLEX-OPT-SM-PW (20.071.180-01) | MOBOTIX | MOUNT, SURROUNDMOUNT S1X, WHITE |
| 15 | ||
| 0808671:0171 (ZBF 5 LGS:FORTL.ZAHLEN 171-180) | Phoenix Contact | ZACK MARKER STRIP,171-180, ZBF 5,LGS:FORTL.ZAHLEN |
| 11 | ||
| 2971184 | RS Pro | INSPECTION WINDOW 49X27X78MM DIN 43880 FOR USE WITH 46277-3 |
| 10 | ||
| 1051029:0171 (ZB 6 QR:FORTL.ZAHLEN 171-180) | Phoenix Contact | TERMINAL BLOCK MARKER STRIP, WHITE, BLACK PRINT, 171-180, , ZACK, ZB/ZBF SERIES |
| 8 | ||
| BU-1420711841 | Mueller Electric Company | CONN SMA JACK STR 50 OHM |
| 5 | ||
| 7118498 | RS Pro | 300MM LONG EPDM 10 BAR BRAIDED STAINLESS STEEL HOSE |
| 3 | ||
| 8771182 | RS Pro | M12 8-PORT 5 POLE SPLITTER BOX 24V PLASTIC HOUSING IP67 10M CABLE |
| 3 | ||
| 142-0711-811 | Cinch Connectivity Solutions | SMA JACK END LAUNCH BULKHEAD ROUND CONTACT RoHS : Compliant |
| 2 | ||
| TL223-1 (3971184) | Fluke Calibration | SUREGRIP ELECTRICAL TEST LEAD SET,031 |
| 2 | ||
| 31671187 | SAB Bröckskes | HOOK-UP WIRE, H07V-K, PVC, 10AWG, RED, UL AWM, UL MTW, CSA AWM, ROHS, CE, VDE, |
| 1 | ||
| 10-101971-183 | Amphenol Industrial Operations | STRAIN RELIEF CABLE CLAMP FOR PT SERIES METAL 18 MM |
| 1 | ||
![]() Onlinecomponents.com | 7118 | JKL Components Corporation | RoHS : Compliant |
| 0 | |
| 39593-7118 | Molex | 5.0MM EUROBLOCK PC RA GRN 11A 18CKT RoHS : Compliant |
| 0 | ||
| 121004-7118 | ITT Interconnect Solutions | CGF121004-7118; CA Bayonet; Circular RoHS : Compliant |
| 0 | ||
| 7118-RC | Bourns Inc | Common Mode Chokes Dual 1.7mH 1kHz 5A 40mOhm DCR Thru-Hole RoHS : Compliant |
| 0 | ||
| 38720-7118 | Molex | SR BTS PC BRS 18 ASY P RoHS : Compliant |
| 0 | ||
| 76155-7118 | Molex | Impact™ 100 Ohm 4 Pair Vertical Backplane Header, 1.90 by 1.35mm Pitch, Left Guided, Right Endwall, 10 Columns, 120 Circuits, Pin Length 5.50mm, Plated Through Hole Dimension 0.39mm , Key Orientation A, Lead-Free RoHS : Compliant |
| 0 | ||
| CFC-7118 | Quest Technology International Inc | Conn Type F M Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| CGF121004-7118 | ITT Interconnect Solutions | Metal Dust Cap For CGF Power Supply Connector - Plug - Shell Size 24 - With Polyamide Rope. RoHS : Compliant |
| 0 | ||
| 39543-7118 | Molex | 5.0MM EUROBLOCK PC RA BLK 11A 18CKT RoHS : Compliant |
| 0 | ||
| 121014-7118 | ITT Interconnect Solutions | KPT7A2041PEW; MIL-DTL 26482 Series I & Mil Battery |
| 0 | ||
| 100100-7118 | C&K Switches | 1XNE18 2U EE 3111000329 RoHS : Compliant |
| 0 | ||
| 7118-1-PK | Brady Worldwide Inc | FUEL OIL VENT Pipe Marker Style 1 Black on Yellow 1 per Card, 5 PK | Brady 7118-1-PK |
| 0 | ||
| 7118-3C-PK | Brady Worldwide Inc | FUEL OIL VENT Pipe Marker Style 3C with Arrows Black on Yellow 3 per Card, 5 PK | Brady 7118-3C-PK |
| 0 | ||
| 11-31-7118 | Molex | AM60026-19 PIVOT RELEASE RoHS : Compliant |
| 0 | ||
| 22-05-7118 | Molex | 2.54mm Pitch KK® Wire-to-Board Header, Right Angle, with Friction Lock, 11 Circuits RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | ADP7118AUJZ-1.8-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.8V 200mA SOT-23-5 T/R RoHS : Compliant |
| 2,002 | |
| ADP7118AUJZ-4.5-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 4.5V 200mA SOT-23-5 T/R RoHS : Compliant |
| 1,348 | ||
| ADP7118ACPZN1.8-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.8V 200mA 6-SON T/R RoHS : Compliant |
| 2,094 | ||
| ADP7118ARDZ-1.8-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.8V 200mA 8-SOIC T/R RoHS : Compliant |
| 14,606 | ||
| ADP7118ARDZ-2.5 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.5V 500mA 8-SOP T/R RoHS : Compliant |
| 8,298 | ||
| ADP7118AUJZ-R7 | Analog Devices Inc | IC VOLT REG Adjustable 1 REG 1.2V 200mA SOT-23-5 T/R RoHS : Compliant |
| 285 | ||
| ADP7118AUJZ-2.5-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 2.5V 200mA SOT-23-5 T/R RoHS : Compliant |
| 1,885 | ||
| ADP7118ACPZN-R7 | Analog Devices Inc | IC VOLT REG Adjustable 1 REG 1.2V 200mA 6-SON T/R RoHS : Compliant |
| 45 | ||
| ADP7118ARDZ-3.3-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 3.3V 200mA 8-SOIC T/R RoHS : Compliant |
| 13 | ||
TPS77118DGKR![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO8 RoHS : Compliant |
| 2,500 | ||
TPS77118DGK![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 150mA 8-SOP Tube RoHS : Compliant |
| 9,933 | ||
SIT1602BI-71-18S-38.400000E![]() | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 38.4MHz 1.62V ~ 1.98V ±20ppm 4-SMD T/R RoHS : Compliant |
| 1,000 | ||
SIT8008BI-71-18E-48.000000D![]() | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 48MHz 1.62V ~ 1.98V ±20ppm 4-SMD T/R RoHS : Compliant |
| 3,000 | ||
| GW Q9LR32.EM-M1M9-XX57-1-180-R18 | ams OSRAM Group | LED Lighting White, Warm 3000K 80 2020 T/R RoHS : Compliant |
| 2,970 | ||
| GW Q9LR32.PM-M3N2-XX57-1-180-R18 | ams OSRAM Group | GW Q9LR32.PM - OSCONIQ S 5050, White LED RoHS : Compliant |
| 2,820 | ||
![]() Sager | TW-20-07-S-D-347-118 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 223 | |
| 7707118016 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707118061 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707118142 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| AW-21-03-G-D-177-118 | Samtec Inc | Board to Board & Mezzanine Connectors 0.80 mm Flex Stack, Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
| 1071180 | Phoenix Contact | Fixed Terminal Blocks PCB Block 13.5A 4 Pos Black RoHS : Compliant |
| 0 | ||
| 0702871186 | Molex | Headers & Wire Housings CGrid Bkwy Hdr DR RtPn 15SAu 82Ckt RoHS : Compliant | 0 | |||
| 2-1617118-9 | TE Connectivity | Low Signal Relays - PCB J1MACDD-12XLS = M39016/24-034L RoHS : Not Compliant |
| 0 | ||
| 5055671182 | Molex | MICROLOCKPLUS 505567 11P RED EMBSTP PKG |
| 0 | ||
| 7-318711-8 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 70177-1185 | ARATAS Americas | DIP Switches / SIP Switches MV20,WVGA,HD,190mm,AV,VR | 0 | |||
| TW-02-11-T-S-207-118 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 7707118056 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707118100 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707118137 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Ameya Holding Limited | TLV117118DCYR![]() | Texas Instruments | 4LDO RoHS : Compliant | 145,886 | ||
TLV117118DCYT![]() | Texas Instruments | TLV117118DCYT , 低噪声低压降稳压器, 1A, 1.8 V输出 2%, 2 → 5.5 V输入, 4针 SOT-223封装 RoHS : Compliant | 76,006 | |||
| 232273071189 | NXP Semiconductors | 9,668 | ||||
| ADP7118ACPZN3.3-R7 | Analog Devices Inc | IC REG LDO 3.3V 0.2A 6LFCSP RoHS : Compliant | 1,889 | |||
| ADP7118AUJZ-R7 | Analog Devices Inc | IC REG LIN POS ADJ 200MA TSOT23 RoHS : Compliant | 456 | |||
![]() ComSIT USA | HR871181A | AVAILABLE EU | 644 | |||
![]() ComSIT USA | SAA7118E | Philips Semiconductors | MULTISTANDARD VIDEO DECODER WITH ADAPTIVE COMB FILTER AND COMPONENT VIDEO INPUT Color Signal Decoder, PBGA156 RoHS : Not Compliant | 587 | ||
| SAA7118EVI | Philips Semiconductors | MULTISTANDARD VIDEO DECODER WITH ADAPTIVE COMB FILTER AND COMPONENT VIDEO INPUT Color Signal Decoder, PBGA156 RoHS : Not Compliant | 60 | |||
| SAA7118EV1M5 | NXP Semiconductors | MULTISTANDARD VIDEO DECODER WITH ADAPTIVE COMB FILTER AND COMPONENT VIDEO INPUT Color Signal Decoder, PBGA156 RoHS : Compliant | 7 | |||
![]() Interstate Connecting Components | TS17118C0000G | Amphenol Anytek | TS -3.5 -17P GREY - TRIVALE | 0 | ||
| 2-1617118-9 | TE Connectivity | J1MACDD-12XLS = M39016/24-034L RoHS : Not Compliant |
| 0 | ||
| MWDM2L-100P-6E7-118B | Glenair Inc | 0 | ||||
| APC07-11-8P | Amphenol Industrial Operations | JAM NUT RECEPTACLE 11-8 PIN 10-779778-08P | 0 | |||
| RJE711881431 | Amphenol Commercial | 8P8C, RA, CAT6, SHIELD, RECESS | 0 | |||
| RJE7118814P2 | Amphenol Commercial | 8P8C, RA, CAT6, SHIELD, RECESS | 0 | |||
| RJE711886463 | Amphenol Commercial | 8P8C, RA, CAT6, SHIELD, RECESS | 0 | |||
| TJ0711840000G | Amphenol Anytek | TJ - 3.5 -7P GREY - ZINC BM C | 0 | |||
| RJE7118814P1 | Amphenol Commercial | 8P8C, RA, CAT6, SHIELD, RECESS | 0 | |||
| RJE711886462 | Amphenol Commercial | 8P8C, RA, CAT6, SHIELD, RECESS | 0 | |||
| 71-184653-55P | Amphenol Industrial Operations | PLUG | 0 | |||
| 4-1617118-2 | TE Connectivity | J1MAP-5XL = M39016/7-014L RoHS : Not Compliant |
| 0 | ||
| 8071-1870 | Glenair Inc | 0 | ||||
| 20014471-18 | TE Connectivity | PRESS XDCR M5601-001205-05KPS | 0 | |||
| 1617118-3 | TE Connectivity | J1MAC-18XM = M39016/7-029M RoHS : Not Compliant |
| 0 | ||
![]() PEI Genesis | 142-0711-826 | Johnson Components | RoHS : Compliant |
| 400 | |
| 142-0711-811 | Johnson Components | RoHS : Compliant |
| 400 | ||
| 135-3711-801 | Johnson Components | RoHS : Compliant |
| 330 | ||
| 142-0711-821 | Johnson Components | RoHS : Compliant |
| 314 | ||
| 145-0711-812 | Johnson Components |
| 16 | |||
| 71-627118-55N | Amphenol Corporation |
| 13 | |||
| 71-627118-55S | Amphenol Corporation |
| 13 | |||
| 142-0711-881 | Johnson Components | RoHS : Compliant |
| 10 | ||
| 142-1711-801 | Johnson Components |
| 2 | |||
| RJE7118814K1 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 2178711-8 | TE Connectivity | Cable Connectors RoHS : Compliant |
| 7,257 | |
| 142-0711-826 | Johnson Components | SMA Jack Assembly, End Launch RoHS : Compliant |
| 500 | ||
| 462A421-71/180-0 | TE Connectivity | Connectors RoHS : Compliant |
| 380 | ||
| 5-147118-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 231 | ||
| ZW-12-12-T-D-787-118 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 164 | ||
| TW-20-07-S-D-347-118 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 147 | ||
| 10128887-118LF | Amphenol FCi | Cable Assembly |
| 143 | ||
| TW-10-05-T-D-197-118 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 123 | ||
| TW-35-07-S-D-487-118 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 95 | ||
| 2-1617118-7 | TE Connectivity | Relays RoHS : Not Compliant |
| 40 | ||
| 7118M45P55 | Amphenol RF | RF Connector |
| 11 | ||
| 2-1617118-6 | TE Connectivity | Relays RoHS : Not Compliant |
| 5 | ||
| 2-1617118-6 | CII Guardian | T05 Relays |
| 5 | ||
| 4-1617118-2 | TE Connectivity | Electronic Component RoHS : Not Compliant |
| 4 | ||
| 71-185024-61P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 2 | ||
![]() PUI | 12.87118 | 556,890 | ||||
![]() Chip 1 Exchange | 12.87118 | Geyer Electronic E K | INSTOCK | 556,890 | ||
| RC0805FR-07118RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 20,000 | |||
| ADP7118AUJZ-4.5-R7 | Analog Devices Inc | INSTOCK RoHS : Compliant | 7,242 | |||
| F711860/PR | Texas Instruments | INSTOCK | 6,000 | |||
| 7118-3320 | Yazaki Corp | INSTOCK | 3,527 | |||
| TDA8029HL/C207,118 | Avnet Engineering Services | INSTOCK | 1,425 | |||
| 7118-3110 | SUMITOMO ELECTRIC Interconnect Products | INSTOCK | 1,280 | |||
| ADP7118ACPZN3.3-R7 | Analog Devices Inc | INSTOCK RoHS : Compliant | 1,042 | |||
| 52271-1879 | INSTOCK | 1,000 | ||||
| 522711890 | INSTOCK | 998 | ||||
| SAA7118E-V1 | Philips Semiconductors | INSTOCK | 779 | |||
| SAA7118E-V1 | Philips Semiconductors | INSTOCK | 779 | |||
| SAA7118E | INSTOCK | 316 | ||||
| SAA7118H | INSTOCK | 24 | ||||
| ADP7118AUJZ-5.0-R7 | Analog Devices Inc | INSTOCK RoHS : Compliant | 10 | |||
![]() Avnet Abacus | RC0402FR-07118KL | YAGEO Corporation | SMD Chip Resistor 118 kOhm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-07118KL) RoHS : Compliant | 20,000 | ||
| 2271183-1 | TE Connectivity | (Alt: 2271183-1) RoHS : Compliant | 11,000 | |||
| RC0805FR-07118KL | YAGEO Corporation | SMD Chip Resistor 118 kOhm 1 125 mW 0805 2012 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0805FR-07118KL) RoHS : Compliant | 10,000 | |||
| 5227118793000 | Molex | Conn FFCFPC Socket 18 POS 1mm Solder RA Surface Mount (Alt: 520450645) RoHS : Compliant | 8,000 | |||
| K1127118 | TE Connectivity | Battery Disconnect Switch DPST Flange Mount (Alt: K1127118) | 3 | |||
| 1071180 | Phoenix Contact | SPTATHR 15 4381 R32 SPTATHR154381R32 (Alt: 1071180) RoHS : Compliant | 0 | |||
| 5767118-2 | TE Connectivity | (Alt: 5767118-2) RoHS : Compliant | 0 | |||
| 5767118-1 | TE Connectivity | Conn Board to Board PL 38 POS 064mm Solder ST SMD Pocket Tape (Alt: 5767118-1) RoHS : Compliant | 0 | |||
| 1617118-3 | TE Connectivity | (Alt: 1617118-3) RoHS : Not Compliant | 0 | |||
| 2-1617118-9 | TE Connectivity | (Alt: 2-1617118-9) RoHS : Not Compliant | 0 | |||
| 4-1617118-2 | TE Connectivity | (Alt: 4-1617118-2) RoHS : Not Compliant | 0 | |||
| 4-1617118-2 | TE Connectivity | (Alt: 4-1617118-2) RoHS : Not Compliant | 0 | |||
| TS17118C0000G | Amphenol Corporation | (Alt: TS17118C0000G) RoHS : Compliant | 0 | |||
| TJ0711840000G | Amphenol Corporation | (Alt: TJ0711840000G) RoHS : Compliant | 0 | |||
AC0201FR-07118RL![]() | YAGEO Corporation | Res SMD Automotive 0201 118R 1 005W 200ppm 7 TR (Alt: AC0201FR-07118RL) RoHS : Compliant | 0 | |||
![]() Avnet Asia | SIT8918BA-71-18S-9.000000 | SiTime Corporation | SCTSIT8918BA-71-18S-9.000000 125CELSIUS, (Alt: SIT8918BA-71-18S-9.000000) RoHS : Compliant | 0 | ||
| GW Q9LR33.PM-M3N2-XX57-1-180-R18 | ams OSRAM Group | (Alt: GW Q9LR33.PM-M3N2-XX57-1-180-R18) RoHS : Compliant | 0 | |||
0522711869![]() | Molex | FFC / FPC Board Connector, 18 Contacts, 1 Row, 1mm, Bottom, Gold, SMT, Right Angle, 0.3mm, Solder (Alt: 0522711869) RoHS : Compliant | 0 | |||
| GW Q9LR35.PM-M4N3-XX57-1-180-R18 | ams OSRAM Group | OOSGW Q9LR35.PM-M4N3-XX57-1-180-R18 Q651 (Alt: GW Q9LR35.PM-M4N3-XX57-1-180-R18) RoHS : Compliant | 0 | |||
| RJE71-188-1401 | Amphenol Corporation | (Alt: RJE71-188-1401) RoHS : Compliant | 0 | |||
| RJE71-188-1441 | Amphenol Corporation | Modular Connector, Modular Jack, 1 x 1 (Port), 8P8C, Cat6, Through Hole Mount (Alt: RJE71-188-1441) RoHS : Compliant | 0 | |||
SIT8008BI-71-18E-37.125000E![]() | SiTime Corporation | (Alt: SIT8008BI-71-18E-37.125000E) RoHS : Compliant | 0 | |||
| SIT8008BI-71-18S-33.333333G | SiTime Corporation | (Alt: SIT8008BI-71-18S-33.333333G) RoHS : Compliant | 0 | |||
| RC0402FR-07118KL | YAGEO Corporation | SMD Chip Resistor, 118 kOhm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose, RC Series (Alt: RC0402FR-07118KL) RoHS : Compliant |
| 0 | ||
| LL071-18SP-18SP-1500 | Samtec Inc | (Alt: LL071-18SP-18SP-1500) RoHS : Compliant | 0 | |||
| RJE71-188-14K1 | Amphenol Corporation | Conn Modular Jack Receptacle 8 POS Solder RA Through Hole 12 Terminal 1 Port (Alt: RJE71-188-14K1) RoHS : Compliant | 0 | |||
| SIT1602BCL71-18N-26.000000E | SiTime Corporation | SCTSIT1602BCL71-18N-26.000000E SIT1602BC (Alt: SIT1602BCL71-18N-26.000000E) RoHS : Compliant | 0 | |||
| 10139371-1824DLF | Amphenol Corporation | FCI10139371-1824DLF EHPCE RA 18MP24S (Alt: 10139371-1824DLF) RoHS : Compliant | 0 | |||
| SIT8918BA-71-18S-9.000000D | SiTime Corporation | SCTSIT8918BA-71-18S-9.000000D AUTOMOTIVE (Alt: SIT8918BA-71-18S-9.000000D) RoHS : Compliant | 0 | |||
| 0522711879 | Molex | FFC / FPC Board Connector, 18 Contacts, 1 Row, 1mm, Bottom, Tin-Bismuth Plated, SMT, Right Angle (Alt: 0522711879) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | C17118_STRADA-2X2-T1-M | LEDIL | MULTILENS4 POSMM D (Alt: C17118_STRADA-2X2-T1-M) RoHS : Compliant | 0 | ||
| SIT8944BM7118EA25.000000E | SiTime Corporation | (Alt: SIT8944BM7118EA25.000000E) RoHS : Compliant | 0 | |||
| SIT8008BI-71-18S-19.200000 | SiTime Corporation | SiT8008B ILow Power Programmable Oscillator (Alt: SIT8008BI-71-18S-19.200000) RoHS : Compliant | 0 | |||
| SIT8944BI-71-18SA33.333333 | SiTime Corporation | (Alt: SIT8944BI-71-18SA33.333333) RoHS : Compliant | 0 | |||
SIT8008BI-71-18S-33.333333E![]() | SiTime Corporation | (Alt: SIT8008BI-71-18S-33.333333E) RoHS : Compliant | 0 | |||
| SIT8008BC-71-18E-27.000000D | SiTime Corporation | SiT8008B C Low Power Programmable Oscillator 33V10 27000000 MHz (Alt: SIT8008BC-71-18E-27.000000D) RoHS : Compliant | 0 | |||
SIT1602BI-71-18S-26.000000D![]() | SiTime Corporation | STANDARD FREQUENCY LOW POWER OSCILLATOR 40 TO 85C 2016 20PPM 18V 26MHZ ST SMD (Alt: SIT1602BI-71-18S-26.000000D) RoHS : Compliant | 0 | |||
| SIT8008BI-71-18S-24.000000E | SiTime Corporation | (Alt: SIT8008BI-71-18S-24.000000E) RoHS : Compliant | 0 | |||
| SIT8008BI-71-18S-40.000000E | SiTime Corporation | Low Power Programmable Oscillator 20ppm 18V 10 Stanby TR (Alt: SIT8008BI-71-18S-40.000000E) RoHS : Compliant | 0 | |||
| SIT8944BA-71-18NA25.000000F | SiTime Corporation | SiT8944B A Endura Series Oscillator 18 V 10 25MHz - Tape and Reel (Alt: SIT8944BA-71-18NA25.000000F) RoHS : Compliant | 0 | |||
| SIT8944BA-71-18EA20.000000E | SiTime Corporation | (Alt: SIT8944BA-71-18EA20.000000E) RoHS : Compliant | 0 | |||
| SIT8008AI-71-18S-25.000000E | SiTime Corporation | (Alt: SIT8008AI-71-18S-25.000000E) RoHS : Compliant | 0 | |||
SIT1602BI-71-18E-50.000000E![]() | SiTime Corporation | Silicon Oscillator 50MHz 18V 15pF 4Pin QFN TR (Alt: SIT1602BI-71-18E-50.000000E) RoHS : Compliant | 0 | |||
| SIT8924BI-71-18E-12.000000G | SiTime Corporation | SIT8924B IOscillator 18 V 10 12MHz (Alt: SIT8924BI-71-18E-12.000000G) RoHS : Compliant | 0 | |||
| SIT8008BI-71-18S-100.000000E | SiTime Corporation | Low Power Programmable Oscillator 20ppm 18V 10 Stanby TR (Alt: SIT8008BI-71-18S-100.000000E) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 9352-732-37118 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 8,000 | |
| RC0603FR-07118R | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,500 | ||
| RC0603FR-07118KL | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,470 | ||
| 271-18K/REEL | Xicon Passive Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,700 | ||
| 271-180 | Xicon Passive Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | ||
| 142-0711-841 | Vertiv Inc | IN STOCK SHIP TODAY |
| 500 | ||
| 4116R-F71-181/391 | Bourns Inc | IN STOCK SHIP TODAY | 333 | |||
| 307118 | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 200 | |||
| 4116R-F71-181/301 | Bourns Inc | IN STOCK SHIP TODAY | 200 | |||
| 1617118-4 | Teledyne Relays | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 5607-118 | Seastrom Mfg |
| 62 | ||
| M1-25-71-18 | Southco | 0 | ||||
| 711883 | PennEngineering (PEM) | 0 | ||||
| P7-11-812 | Southco | Meet the requirements of the AMC.0 specifications for mezzanine-card modules plus enjoy added benefits of durability user convenience and aesthetic options with these robust die-cast module handles and light pipes developed specifically to keep pace | 0 | |||
| 711809 | PennEngineering (PEM) | 0 | ||||
| 711814 | PennEngineering (PEM) | 0 | ||||
| 711813 | PennEngineering (PEM) | 0 | ||||
| 497118 | Essentra Components | 0 | ||||
| P7-11-813 | Southco | Meet the requirements of the AMC.0 specifications for mezzanine-card modules plus enjoy added benefits of durability user convenience and aesthetic options with these robust die-cast module handles and light pipes developed specifically to keep pace | 0 | |||
| SN-711-8-SK | Sugatsune Kogyo Co Ltd | SPARE KEY FOR SN-711-8 | 0 | |||
| 711811 | PennEngineering (PEM) | 0 | ||||
| 711806 | PennEngineering (PEM) | 0 | ||||
| E5-1-071-180 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 711808 | PennEngineering (PEM) | 0 | ||||
| 711812 | PennEngineering (PEM) | 0 | ||||
![]() EBV Elektronik | C17118_STRADA-2X2-T1-M | LEDIL | MULTILENS4 POSMM D (Alt: C17118_STRADA-2X2-T1-M) RoHS : Compliant | 480 | ||
| GWP9LR37.EM-M1M6-XX57-1-180-R18 | ams OSRAM Group | (Alt: Q65115A1032) RoHS : Compliant | 0 | |||
| GWQ9LR33.PM-M3N2-XX57-1-180-R18 | ams OSRAM Group | LED Chip Warm White 3000K 1050mA 2Pin SMD TR (Alt: Q65113A4753) RoHS : Compliant | 0 | |||
| GWQ9LR35.CM-L7M5-XX57-1-180-R18 | ams OSRAM Group | (Alt: Q65115A2679) RoHS : Compliant | 0 | |||
| GWQ9LR33.EM-M2M9-XX57-1-180-R18 | ams OSRAM Group | LED Lighting OSCONIQ S 5050 White Warm 3000K 552V 180mA 120 2020 5050 Metric (Alt: Q65113A6094) RoHS : Compliant | 0 | |||
| GWP9LR37.PM-M3M8-XX57-1-180-R18 | ams OSRAM Group | (Alt: Q65115A0122) RoHS : Compliant | 0 | |||
| GWQ9LR35.EM-M2N1-XX57-1-180-R18 | ams OSRAM Group | (Alt: Q65115A1746) RoHS : Compliant | 0 | |||
![]() Master Electronics | AW-21-03-G-D-177-118 | Samtec Inc | 0.80 mm Flex Stack Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | |
| TW-20-07-S-D-347-118 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| 1071180 | Phoenix Contact | PCB terminal block - nominal current: 13.5 A - rated voltage (III/2): 160 V - nominal cross section: 1.5 mm² - pitch: 3.81 mm - number of positions: 4 - connection method: Push-in spring connection - mounting: THR soldering - conductor/PCB connection direction: 45 ° - color: black - Solder pin [P]: 2.6 mm RoHS : Compliant |
| 0 | ||
| 2-1617118-9 | TE Connectivity | J1MACDD-12XLS = M39016/24-034L MOQ Reduction RoHS : Compliant |
| 0 | ||
| 7-318711-8 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| TW-02-11-T-S-207-118 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-157-118 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-247-118 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-197-118 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-30-05-L-D-557-118-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-50-05-F-D-557-118-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-171-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-171-184 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-04-01-F-D-637-118 | Samtec Inc | FLEXIBLE MICRO BOARD STAC RoHS : Compliant |
| 0 | ||
| 5767118-2 | TE Connectivity | MICT PLG 076 ASY .025 TAPE CAP MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1071180 | Phoenix Contact | Fixed Terminal Blocks PCB Block 13.5A 4 Pos Black RoHS : Compliant |
| 50 | |
| 09474747118 | HARTING Technology Group | Ethernet Cables / Networking Cables RJI CORD 4X2AWG 26/7 OVERM 7.5M RoHS : Compliant |
| 33 | ||
| A8711889-AX | Axiom Manufacturing | AXIOM 32GB DDR4-2400 ECC LRDIMM FOR DELL - A8711889 |
| 0 | ||
| 77.11.8.230.8250 | FINDER SpA | Solid State Relay, 24 VDC, SPST-NO, 15A/230VAC, Zero Switching, 77 Series RoHS : Compliant |
| 0 | ||
| A8711887-AX | Axiom Manufacturing | AXIOM 16GB DDR4-2400 ECC RDIMM FOR DELL - A8711887, SNPHNDJ7C/16G, 100% INCREASE |
| 0 | ||
| 7118N | ebm-papst | DC Fans Size=150x38 mm CFM=212 VDC=48 RoHS : Compliant |
| 0 | ||
| A8711890-AX | Axiom Manufacturing | AXIOM 64GB DDR4-2400 ECC LRDIMM FOR DELL - A8711890, SNP29GM8C/64G, 100% INCREAS |
| 0 | ||
| 9767118 | WIKA Instrument LP | Pressure Gauge, 0/600 psi scale on 2.5" dial, 1/4" NPT, Series 213.53 |
| 0 | ||
![]() Pasternack Enterprises US | PE3W00171-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female Bulkhead to MMCX Plug Right Angle Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly SMA female bulkhead to MMCX plug right angle cable 18 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MMCX plug right angle cable 18 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assembly has a female gender on end 1 and a plug on end 2. PE3W00171-18 can also be known as a SMA jack to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The semi-rigid RF cable has a between series connection. SMA jack to MMCX male cable assembly PE3W00171-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00171-18 can also be used in the other direction and will be a right angle MMCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX RF cable assembly as per your requirements. |
| 134 | |
| PE3871-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 18 inches. SMA Male to SMA Female Bulkhead Cable 18 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 18 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 18 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3871-18, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3871-18 is built with RG59 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3871-18 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 18 inch length using 75 Ohm RG59 coax. |
| 108 | ||
| PE3971-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. N Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR405FL Coax., Radio frequency assembly N male to N female bulkhead cable 18 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 18 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N bulkhead cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3971-18, can also be known as a type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3971-18 is built with PE-SR405FL which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3971-18 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 18 inch length using PE-SR405FL coax. |
| 106 | ||
| PE34271-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 18 inches. TNC Male to TNC Male Cable 18 Inch Length Using RG401 Coax., Radio frequency assembly TNC male to TNC male cable 18 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 18 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE34271-18, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE34271-18 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 18 inch length using RG401 coax. |
| 12 | ||
| PE36571-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 18 inches. SSMA Male to SSMA Male Right Angle Cable 18 Inch Length Using RG178 Coax., Radio frequency assembly SSMA male to SSMA male right angle cable 18 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMA male to SSMA male right angle cable 18 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA cable connection on one end and right angle SSMA cable connection on the other. Our SSMA to right angle SSMA cable assemblies have a male gender on end 1 and male on end 2. This SSMA to SSMA cable is a male to male coax assembly, PE36571-18, can also be known as a SSMA plug to right angle SSMA plug cable assembly and will be shipped same-day as it is purchased. SSMA plug to SSMA plug cable assembly PE36571-18 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to right angle SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA male to SSMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36571-18 can also be used in the other direction and will be right angle SSMA male to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SSMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to SSMA male right angle cable 18 inch length using RG178 coax. |
| 7 | ||
| PE3W17118 | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SC Male to SC Male Cable Using PE-P195 Coax. PE3W17118 is a SC male to SC male cable using PE-P195 coax. This Pasternack SC male to SC male cable assembly uses a 50 Ohm SC for connector 1 and a 50 Ohm SC for connector 2. Our male SC to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17118 SC male to SC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3C6271-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to 2.92mm Female Bulkhead Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly 2.92mm male to 2.92mm female bulkhead cable 18 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female bulkhead cable 18 inch length using RG405 coax, 2.92mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and female on end 2. PE3C6271-18 can also be known as a 2.92mm plug to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm jack cable assembly PE3C6271-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.92mm male to 2.92mm female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6271-18 can also be used in the other direction and will be 2.92mm female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.92mm jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm female bulkhead cable 18 inch length using RG405 coax. |
| 0 | ||
| PE3W07118 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Right Angle Cable Using LMR-400-UF Coax. PE3W07118 is a TNC male to TNC male right angle cable using LMR-400-UF coax. This Pasternack TNC male to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07118 TNC male to TNC male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10371-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable 180 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10371-180 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10371-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10371-180 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10371-180 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7118 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W17118LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SC Male to SC Male Cable Using PE-P195 Coax, LF Solder. PE3W17118LF is a SC male to SC male cable using PE-P195 coax. This Pasternack SC male to SC male cable assembly uses a 50 Ohm SC for connector 1 and a 50 Ohm SC for connector 2. Our male SC to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17118LF SC male to SC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3171-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Female Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to SMA female cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3171-18, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3171-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3171-18 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 18 inch length using RG316-DS coax. |
| 0 | ||
| PE33071-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 18 inches. SSMA Male to SSMA Male Cable 18 Inch Length Using RG316 Coax., Radio frequency assembly SSMA male to SSMA male cable 18 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMA male to SSMA male cable 18 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA cable connection on one end and SSMA cable connection on the other. Our SSMA to SSMA cable assemblies have a male gender on end 1 and male on end 2. This SSMA to SSMA cable is a male to male coax assembly, PE33071-18, can also be known as a SSMA plug to SSMA plug cable assembly and will be shipped same-day as it is purchased. SSMA plug to SSMA plug cable assembly PE33071-18 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMA male to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA plug to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to SSMA male cable 18 inch length using RG316 coax. |
| 0 | ||
| PE34071-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE34071-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE34071-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34171-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to N Female Bulkhead Cable 18 Inch Length Using RG174 Coax., Radio frequency assembly SMA male to N female bulkhead cable 18 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 18 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34171-18, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to N type jack cable assembly PE34171-18 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34171-18 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 18 inch length using RG174 coax. |
| 0 | ||
![]() Vyrian | AD7118CQ![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, CDIP16 RoHS : Not Compliant | 12,066 | ||
AD7118KN![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, PDIP16 RoHS : Not Compliant | 11,885 | |||
| AD7118KP | Analog Devices Inc | D/A Converter, 1 Func, PQCC20 RoHS : Not Compliant | 11,744 | |||
| AD7118CD | Analog Devices Inc | D/A Converter, 1 Func, CDIP14 RoHS : Not Compliant | 10,301 | |||
| PMP7118 | Texas Instruments | 9,855 | ||||
| AD7118BD/883B | Analog Devices Inc | D/A Converter, 1 Func, CDIP14 RoHS : Not Compliant | 9,600 | |||
TPS77118QDGKRQ1![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO8 | 9,449 | |||
AD7118LN![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, PDIP16 RoHS : Not Compliant | 9,407 | |||
TPS77118QDGKQ1![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO8 | 8,009 | |||
| AD7118CD/883B | Analog Devices Inc | D/A Converter, 1 Func, CDIP14 RoHS : Not Compliant | 7,701 | |||
TPS77118DGKG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO8 RoHS : Compliant | 6,649 | |||
AD7118BQ![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, CDIP16 RoHS : Not Compliant | 5,751 | |||
TPS77118DGKRG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO8 RoHS : Compliant | 5,721 | |||
TDA8029HL/C207,118![]() | NXP Semiconductors | Microcontroller, 8-Bit, MROM, 20MHz, CMOS, PQFP32 RoHS : Compliant | 5,585 | |||
| AD7118BD | Analog Devices Inc | D/A Converter, 1 Func, CDIP14 RoHS : Not Compliant | 5,181 | |||
![]() Win Source Electronics | TLV117118DCYT![]() | Texas Instruments | IC REG LDO 1.8V 1A SOT223 RoHS : Compliant |
| 35,000 | |
| ADP7118AUJZ-R7 | Analog Devices Inc | IC REG LDO ADJ 0.2A TSOT23-5 RoHS : Compliant |
| 29,999 | ||
| ADP7118AUJZ-R2 | Analog Devices Inc | 200-mA, 18-V, ultra-low-IQ, low-dropout (LDO) voltage regulator with enable ; 5-SOT-23 -40 to 125 RoHS : Compliant |
| 28,390 | ||
TLV117118DCYR![]() | Texas Instruments | IC REG LDO 1.8V 1A SOT223 RoHS : Compliant |
| 27,580 | ||
| ADP7118WAUJZ-5.0-R7 | Analog Devices Inc | IC REG LINEAR 5V 200MA TSOT5 / Linear Voltage Regulator IC Positive Fixed 1 Output 200mA TSOT-23-5 RoHS : Compliant |
| 19,900 | ||
| ADP7118AUJ | Analog Devices Inc | LDO Regulator 5-TSOT |
| 15,000 | ||
| ADP7118ARDZ-5.0 | Analog Devices Inc | IC REG LINEAR 5V 200MA 8SOIC / Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 8-SOIC-EP RoHS : Compliant |
| 13,000 | ||
| ADP7118ARDZ-5.0-R7 | Analog Devices Inc | IC REG LINEAR 5V 200MA 8SOIC RoHS : Compliant |
| 11,780 | ||
| ADP7118ACPZN | Analog Devices Inc | LDO Regulator 8-LFCSP |
| 11,000 | ||
| ADP7118ACPZN-R7 | Analog Devices Inc | IC REG LIN POS ADJ 200MA 6LFCSP / Linear Voltage Regulator IC Positive Adjustable 1 Output 200mA 6-LFCSP-UD (2x2) RoHS : Compliant |
| 10,070 | ||
| ADP7118ACPZN5.0-R7 | Analog Devices Inc | IC REG LINEAR 5V 200MA 6LFCSP RoHS : Compliant |
| 9,180 | ||
| ADP7118ACPZN3.3-R7 | Analog Devices Inc | IC REG LINEAR 3.3V 200MA 6LFCSP RoHS : Compliant |
| 8,000 | ||
| ADAU7118ACP | Analog Devices Inc | 8-Channel PDM to I2S/TDM Converter |
| 8,000 | ||
| ADP7118ACPZN1.8-R7 | Analog Devices Inc | IC REG LINEAR 1.8V 200MA 6LFCSP / Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 6-LFCSP-UD (2x2) RoHS : Compliant |
| 3,000 | ||
| ADP7118AUJZ-2.5-R7 | Analog Devices Inc | IC REG LIN 2.5V 200MA TSOT23-5 RoHS : Compliant |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |